Home
SupplyCare Enterprise SCE30
Contents
1. Workplace My tank view m My tank view table Inventory chart tab m Tank details tab m Event details tab E Download history tab Workplace Event Event details tab Inventory chart tab m Tank details tab Unit field Workplace Scheduling Planning table Plan delivery disposal tab Planned delivery disposal tab Overview tab Workplace Analysis Analysis table KPIs tab Outflow Inflow tab Chart hourly tab Chart daily tab The unit volume selected here is used in the following areas of the program if Volume is selected for the tank unit Menu Description Workplace Tank Tank table Inventory chart tab Tank details tab Event details tab Download history tab Workplace My tank view m My tank view table Inventory chart tab m Tank details tab Event details tab A Download history tab Workplace Event Event details tab Inventory chart tab m Tank details tab Unit field Workplace Scheduling Planning table Plan delivery disposal tab Planned delivery disposal tab Overview tab Workplace Analysis Analysis table KPIs tab Outflow Inflow tab Chart hourly tab Chart daily tab The language selected here is used as the language for event and limit notifications Endress Hauser SupplyCare Enterprise SCE30B 13 Maintaining a profile
2. IC Waste EU oth at UK Tank groups Tank notes mr Ea d Tank setup wizard Tank name Ic 02000 a Capacity 100 Location US Operations West Optimum Buyer Buyer AG Plan point 50 Supplier Supplier AG Ship point soT 2 Days satety stock 35 Product Product IC 020 Hysteresis 2 E Use product unit Unit Tank type 2 Standard tank Recycling tank ADIADO based on 14 Days p include negative values Activate forecast 5 Click the EE button The data record is displayed in the editing mode Secondaries Tank freeze Tank groups Tank notes Tank name Ic 02000 a Capacity Location US Operations West h i Optimum Buyer Plan point Supplier Supplier AG ad ee l Ship point sot safety stock 35 Product ease ia unit Tank type Standard tank Recycling tank ADVADO based on Days NM Include negative values Activate forecast Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 3 7 Receiving messages messaging Notice opio Everyone can receive a notification message A message from the system administrator is displayed the next time the user logs on Message 1 of 1 dofi ag TE PIF Ok Subject Subject Message Message Created by Lena Leppert Created at Mar 25 2011 5 00 36 PM Fj mark az read The following options are available Button Meaning field fe Save message as PDF file
3. O Cia Name anl l All Tanks a ES Description Tank name gt Notes gt Location al IC Waste Material Safety Instruction EU Operation W IC 02000 Tank soll regelm ig alle 3 US Operation W LNG Waste APAC Operati W LNG 01000 APAC Operati W Ic 01000 US Operation or10 4 In the lower section of the Application window select the Tank assignment tab 5 Click the button 6 The tab is displayed in the edit mode Tank assignment User assignment E Name Product All Description 2 Tank name gt Notes gt Location gt O IC Waste Material Safety Instruction EU Operation O IC 02000 Tank soll regelm ig alle 3 US Operation LNG Waste APAC Operati O LNG 01000 APAC Operati O Ic 01000 US Operation ott0 7 Here you can enter data on the tank group such as Name obligatory unique identifier of the tank group Description you can enter a multiline description here Assignment by means of the table you can activate the check boxes to assign the corresponding tanks to this tank group 8 Click El to save your entries Click to abort the process 9 Select the User assignment tab to assign the tank groups to a user see Page 111 11 7 2 Assigning users to a tank group and setting up notifications for tank events You can assign one or more users to the tank group using the User assignment tab On this tab you can also specify
4. SupplyCare Enterprise SCE30B 11 Managing master data 5 The tab is displayed in the edit mode Tank details Secondaries Tank freeze Tank groups Tank notes Ey 3 Copy to other tanks Activate o Delta calculation g absolute percentaged Freeze event delta 42 Unit kg Time zone UTC 00 00 Coordinated Uni Repetition rule Daily From time 17 0 To time 23 55 Here you can enter data to configure tank freeze events such as Activate If this option is enabled tank freeze events are enabled The enabled tank freeze events are displayed with a green button the disabled tank freeze events are displayed with a red button This option can be changed in edit mode by clicking the green or red button The default setting for this option is disabled Delta calculation Select absolute to specify the Freeze event delta as a fixed value in the unit of the tank Select percentaged to specify the Freeze event delta as a percentage of the configured tank capacity The default setting for this option is absolute Freeze event delta obligatory Enter a positive numeric value At the beginning of the monitoring time the last measured tank value e g the tank level is saved frozen This frozen measurement is compared with the current measurements during the monitoring time If the difference between the frozen measurement and the current measurement exceeds the Freeze event delta positive or negative
5. Inventory chart Tank partners Tank service status Download history Es From date To date Comment 4 1 8 Event details The event details for the currently applicable event e g Safety stock reached for the selected tank are shown in this tab If no event is currently applicable for the selected tank this tab is not visible For a description of the Event details tab see Page 54 Inventory chart Tank details Notes and files Tank partners Location detaile Tank service status Download history Message Safety stock reached detected by measurement Status Acknowledge Comment In process Planned disposal Amount Unit Time stamp Time Zone Comment 4 1 9 Freeze event details The event details for the currently applicable freeze event for the selected tank are shown in this tab If no freeze event is currently applicable for the selected tank this tab is not visible For a description of the Freeze event details tab refer to Page 56 Tank details Motes and files Location details Tank service status Event details Freeze event details Inventory chart Download history Message Freeze event detected by measurement Value 61 750 0 Unit kg Time stamp 11 6 13 6 50 PM Time zone UTC 01 00 Limit Value 61 655 0 Unit kg Time stamp 11 6 13 5 55 PM Time zone UTC 01 00 Freeze event delta 42 0 Unit kg Endress Hauser 41 3 User interface 42 SupplyCare Enterprise SCE30B
6. Name obligatory name of the company Contact select a contact person from the picklist The contact person has to have been added beforehand using the User menu item and assigned to the Company Identifier company ID to be used in the CIDX reports Identifier agency selection of organization responsible for managing the identifier for the companies The selection complies with the CIDX standard The identifier agency is required to create CIDX reports Street City Zipcode State Country Description you can enter a multiline description here 7 Click E to save your entries Click to abort the process 11 1 2 Changing a company gt See Page 27 Chapter 3 6 5 11 1 3 Deleting a company gt See Page 30 Chapter 3 6 8 Notice A company can only be deleted if no more users are assigned to this company If you still want to delete the company you first have to delete the users assigned to this company The button is only displayed for a company which can be deleted 11 1 4 Copying a company See Page 31 Chapter 3 6 9 11 2 Managing users Notice m A user always belongs to a company It is therefore necessary to create the company first see Page 81 m Only people whose user role is configured as Master data can create change and delete users m f the user role of a user is changed the change only becomes effective after logging out and logging in again 11 2 1 Cre
7. Step 6 out of 6 Scheduling Define the scheduling rules Enable scheduling Overview of affected dates Time zone UTC 00 00 Coordinated Unid November 2011 Repetition rule Schedule by Time O Frequency Hours Minutes Hours Minutes 2 12 23 7 B 230 HA AA 18 Click the Finish button to finish the report 122 Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data 11 9 2 Downloading the report as a PDF file You can download a report as a PDF file and save it in your file system l oe oe A A Click the Configuration menu in the Navigation window Click the Report menu Select the report in the upper section of the Application window In the lower section of the Application window select the General report information tab Click the Sl button As soon as the report is finished the File download dialog box is displayed Click the Open button to view the report immediately Click the Save button to save the report in your file system Click Cancel to abort the process 11 9 3 Creating reports and sending them immediately Irrespective of the scheduling rules you can create a report any time and send the report to the recipients as defined in the channel configuration The scheduling rules remain unchanged Notice Weil Only messages with the status O are taken into consideration in CIDX and CSV type reports l e A A Click the Configuration menu in the Navigation wind
8. 26 3 6 5 Changing master data 27 3 6 6 Displaying modified master data in full 29 3 6 7 Selecting all the rows in a table 30 3 6 8 Deleting master data espiar 30 3 6 9 Copying and changing a data record 31 3 7 Receiving messages messaging 33 4 Monitoring tanks Tank workplace dida iia 34 4 1 Viewing tanks and associated information 34 4 1 1 Tank overview table sui rc 35 ALA Tveno cid rr 37 Alo Tank deleri eiere ita eaa 38 Endress Hauser 4 2 4 3 4 4 4 5 4 6 4 7 5 1 6 1 6 2 6 3 6 4 Fal Tol 159 7 4 Table of contents A 1 4 Notes and TCS sce a aisces Saad ew dre 39 Alo Tank parne pla dd 40 4 1 6 Location details eri ais 40 4 1 7 Tank service status baila 41 ANS Event detaili spatial 41 4 1 9 Freeze event details susi 41 Editing tank service status ls 42 D wnload MSO aaa 43 Viewine secondaries 4 ony salieran 45 4 4 1 Viewing secondaries in the overview table in the Tank menu item eiii 45 4 4 2 Viewing secondaries in the inventory chart 46 4 4 3 Viewing secondary data via the Tank detalles aes si de 47 Viewing historical values and forecast values in theinyentory chatt iia 47 Zoom functions in the inventory chart 49 Planning disposal and delivery via the inventory A A A ates 50 Viewing personalized tank view My tank view workplace Viewing secondaries o o oooooooooooooo 53
9. Previous This button is displayed if several messages are available Click the Previous message button to view message and process previous messages Next message This button is displayed if several messages are available Click the Next message button to view and process subsequent messages OK This button is displayed for the last message Click OK to exit the dialog Mark as read Mark the message as read using the Mark as read field Endress Hauser 33 3 User interface 34 SupplyCare Enterprise SCE30B 4 Monitoring tanks Tank workplace 4 1 Viewing tanks and associated information Notice The Tank menu item is available to people with Read only Scheduler or Operator configured as their user role he Notes and Files Tank Partners Location Details and Event Details tabs are displayed only if they contain at least one piece of information The time zone configured for the location is used for the Tank menu item gt See Page 104 UTC 00 00 is the default value m Depending on your configuration Objects are displayed instead of Tanks For more information refer to the appropriate chapter in the Service Manual for System administration 1 Click the Workplace menu in the Navigation window 2 Click the Tank menu item A list of the tanks assigned to you is displayed orkplace gt gt Tank El Show secondary data Unit Time zone Location ank group All Product All Supplier Al
10. SupplyCare Enterprise SCE30B 4 1 3 Tank details The tab displays information on the tank and limit values Inventory chart Notes and files Tank partners Location details Tank service status Freeze event details Download history Organization Limits Tank name IC 02000 Capacity 100 0 Value 80 6 Optimum Unit a Plan point 50 0 Time stamp 9 11 12 3 10 AM Ship point Product Product IC 020 Safety stock 35 0 Location US Operations West Hysteresis 2 0 Time zone UTC 05 00 Free capacity 19 4 soT 2 Tank type 7 Standard tank Description of fields Field Description Recycling tank Tank name The tank name is selected in the Configuration menu in menu item Tank field Tank name Value Last primary value The Value field indicates the last valid measured value For aggregated tanks the sum of the valid measured values for the associated tanks is displayed Tanks with status Out of service are not included If all associated tanks are Out of service 0 is displayed as the value The number of places after the decimal point is defined in the Configuration menu Unit menu item Unit Last unit of primary value The unit is specified in the Tank menu item In the case of mass units the selection for the field Unit mass in the User preferences menu item has priority over the setting in the Tank menu item m In the case of volume units the s
11. SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 3 Ifno gateways have been created yet the following view appears in the application window Enabled Name Unique IDS Name Name El oel Eel ore Ekl loki Gateway details Communication Scheduling name EY l User description O Type Unique ID Tag Description Last modified If gateways have already been created the previously created gateways are displayed as follows Enabled Name Unique ID Name Name a HTTP Gateway 123456789 Device 1 J RAS Gateway 9075654321 Device 2 3 E mall Gatew ay 543219076 Ell oriee EEL trekk EEL fod 4 For creating new gateways refer to Chapter 12 8 1 see Page 147 For configuring gateways refer to Chapter 12 8 2 see Page 148 12 8 1 Creating new gateways 1 In the Navigation window click the System administration menu Click the Gateway configuration menu item Select the Gateway details tab Click the k button pe 147 12 System administration 148 SupplyCare Enterprise SCE30B 5 The tab is displayed in the edit mode By ed Enabled Name 9 10 ize User description Type FXA320 Endress Hauser Unique ID Tag Description Last modified Enter a name in the Name field If necessary enter a description in the User Description field Via the Type field select the gateway used You can choose between the following gateways
12. Additional information is displayed if you enter a period for the From date and To date fields or enable the Show available period check box 73 9 Viewing analysis data Analysis workplace 74 Description of fields Field SupplyCare Enterprise SCE30B Description Daily outflow Displays the calculated daily outflow for the date entered Average daily outflow average daily inflow m Standard tanks Average daily outflow Recycling tanks Average daily inflow The values are calculated with the average quantity per day The calculated average quantity is based on the configured Forecast based on value Daily inflow Displays the daily inflow for the date entered Days until the safety stock is reached Indicates the estimated number of days remaining until the safety stock is reached The value is calculated with the average quantity per day m If Safety stock has been disabled or if the value is 0 the Days until the safety stock is reached field is empty Next planned delivery Next planned disposal Standard tanks Displays the next planned delivery Recycling tanks Displays the next planned disposal Total outflow Displays the total outflow for the period entered Total inflow Displays the total inflow for the period entered Number of deliveries Number of disposals Standard tanks Displays the number of deliveries made for the period entered Recycli
13. Editing events Event workplace 54 Event management Status and weighting of A ON 54 Viewing event messages ivi 55 O2 Event detil rra 56 022 Freeze event detallS textile eek deed 56 O25 Event MSO AS 57 O24 IMVentOry Chart eta dices t 57 02 3 Tank detail soperas 57 Processing event messages y a uns ec death ed x 3 7 Setting the resubmission dale iras 59 Planning delivery and disposal Scheduling workplace 60 Status management delivery and disposal 60 Status display and notification of planned deliveries A A eis era Seas 60 7 2 1 Processing the status 61 7 2 2 Viewing status history iia Sods See Ss 62 Planning delivery and disposal Scheduling Worp ra riadas des 3 7 3 1 Planning a delivery or disposal 64 AS Plausible ori oi 65 7 3 3 Deleting a delivery or disposal 66 Copying a delivery or disposal vasos 66 7 4 1 Viewing a planned delivery or disposal and saving as an Excel spreadsheet 67 SupplyCare Enterprise SCE30 8 1 8 2 8 3 9 1 9 2 9 3 9 4 9 5 10 10 1 10 2 10 3 11 ELZ 11 3 11 4 Totaling and managing templates Totaling workplace 68 TORDO airi o tents gn aise Gotan aca ten sh E 68 Saving a selection as a template 69 8 2 1 Creating a new template 70 8 2 2 Overwriting an existing template 70 Selecting or deleting templates 71 V
14. Time zone UTC 05 00 Comment 5 In the overview table click a status to change it or to view the history 6 You can select the following tabs in the lower area of the Application window Details or History 7 2 1 Processing the status The following status information can be displayed Button Meaning ae Detected the Detected status is displayed in the following situations The system has detected a delivery or disposal which has been scheduled too early or too late You can process this delivery or disposal in the Details tab using the Confirm button The system has detected a missing delivery or disposal You can process this delivery or disposal in the Details tab using the Mark as fulfilled button The system has detected that measured data are missing You can process this delivery or disposal in the Details tab using the Mark as fulfilled button E Confirmed the Confirmed status is displayed in the following situations wd A delivery or disposal which has been scheduled too early or too late was confirmed when the delivery disposal was created m A delivery or disposal which has been scheduled too early or too late has been confirmed in the Details tab Deleted a planned delivery or disposal has been deleted New a new delivery or disposal has been planned Fulfilled a new delivery or disposal has been fulfilled If a delivery and disposal is made this is flagged by SupplyCare as
15. Average daily outflow 2211 1 Daily inflow 325 201 2 396 3 Day s until reaching safety stock 1 Hext planned delivery From date E To date E Show available period El 3 In the table click the tank whose analysis data you want to view 4 You can choose the following tabs in the lower part of the application window KPIs Outflow Inflow Chart hourly and Chart daily Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 9 Viewing analysis data Analysis workplace 9 1 Analysis overview table Pressing the button in the table header in the overview opens a context menu Via this context ri menu you can show hide and move table columns The following columns are available for the overview table Columns Description Location Indicates the tank location The location is the name of the location The name is selected in the Configuration menu in menu item Tank field Location The location is specified in the Location menu item Tank name Indicates the tank name The tank name is entered in the Tank name field path Configuration gt Tank Tank details gt Tank name Unit Indicates the unit The unit for the primary value is specified via the Unit field in the Tank details tab In the case of mass units and volume units priority is given to your settings for the Mass unit or Volume unit fields in the User preferences menu item Time zone Time
16. Chapter 3 6 5 11 3 8 Deleting a tank gt See Page 30 Chapter 3 6 8 11 3 9 Copying a tank gt See Page 31 Chapter 3 6 9 11 4 Managing aggregated tanks Notice m Only people whose user role is configured as Master Data can create change and delete ageregated tanks m Depending on your configuration Aggregated Objects are displayed instead of Aggregated Tanks For more information refer to the appropriate chapter in the Service Manual for System administration 11 4 1 Creating an aggregated tank Notice m The Location Buyer Supplier and Product first have to be created before you can select elements for these fields The Buyer and Supplier are created as a Company see Page 81 m If you have assigned a tank to an aggregated tank this tank is removed from the Tank assignment tabs under the Tank Tank group and Report menu items f you would like to make changes to a tank that is assigned to an aggregated tank you first have to remove the tank from the tank list a f you want to assign a tank which is already assigned to a tank group to an aggregated tank this tank must be removed from the tank group m An aggregated tank always has to be assigned to a tank group since you can only assign tank groups to a user 1 Click the Configuration menu in the Navigation window 2 Click the Aggregated tank menu item Endress Hauser 90 11 Managing master data 100 SupplyCare Enterprise SCE30B
17. Click to abort the process 23 Click El to save your entries in the Limit notification tab Click to abort the process Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 12 6 4 Defining and editing PDL PDE notification In the PDL PDE notification tab you can specify the subject line and the PDL PDE notification text for PDL PDE notifications 1 In the Navigation window click the System administration menu 2 Click the Notifications menu item 3 Click the PDL PDE notification tab A The following view is displayed in the Application Window Event notification Freeze event notification Limit notification POL PDE notification Subject Subject Default Delivery disposal state message Tank name Location ie Subject Custom cO Body POLIPDE Language a 5 Click the button 6 The tab is displayed in the edit mode 7 The radio button of the Subject Default subject line is preselected Accept the preselection or click the Subject Custom radio button to define the subject yourself 8 Click the a button to display the Available variables legend Available variables 0 First name Name Tank name Location PDOL PDE state message _ Delvery Disposal date and time Time zone 6 Amount Unit amp Product Comment 10 Delivery disposal state message 11 Salutation 12 Title 13 Supplier of tank 14 Buyer of tank 9 In
18. D ocea AR E is DO ico mix 6 000 0 1 Days UTC 01 00 40 000 0 6 34 000 0 Product IC 030 O co3000 3 000 01 Days UTC 01 00 20 000 0 45 HQ 17 000 0 Product IC 030 J f amp IC Waste 3 000 0 Days UTC 01 00 30 000 0 90 O EU Operations UK 27 000 0 Waste IC 011 J IC Waste Il 3 000 0 Days UTC 01 00 30 000 0 90 EU Operations PL 27 000 0 Waste IC 011 zlaja 20t9v Inventory chart Notes and files Tank partners Location details Tank service status Event details Download history Organization Limits Tank name IC 02000 Capacity 100 0 Value 66 0 Optimum 90 0 Unit Plan point 45 0 Time stamp 3 26 12 10 20 AM Ship point 35 0 Product Product IC 020 Safety stock 10 0 Location US Operations West Hysteresis 2 0 Time zone UTC 05 00 Free capacity 34 0 Standard Recycling E delivery 2 time Days The character the system uses as the thousand separator depends on the language setting selected in the browser e g German Germany de DE 1 234 78 German Switzerland de CH 1 234 78 English US en US 1 234 78 Notice m No thousand separator is used for numerical values that appear in views histories or reports that are downloaded sent or printed out m The number of places after the decimal point is defined in the Configuration menu Unit menu item Only people whose user role is configured as Master Data can change the number of places after the decimal point for the units 3 6
19. E mail communication version when a gateway is newly created see Page 150 Input range m 0 2147483647 Factory setting empty cm dailyScanAmount tolerance This parameter specifies the standard value for the Tolerance before warning field in the Gateway configuration menu item for the E mail communication version when a gateway is newly created see Page 150 Input range 0 to 2147483647 integer Factory setting empty 125 12 System administration 126 Key SupplyCare Enterprise SCE30B Description cm mail host Host address of the e mail server to retrieve the gateway e mails from the server This parameter corresponds to the Host name field in the Outgoing tab in the E mail connection menu item in the System administration menu Factory setting empty cm mail intervall Interval in minutes between gateway e mail retrieval from the server This parameter corresponds to the Interval field in the Outgoing tab in the E mail connection menu item in the System administration menu Input range m to 2147483647 integer Factory setting a5 cm mail local mailExtension This file name extension is assigned to e mails on the local clipboard Factory setting msg cm mail local store Directory for local temporary storage of e mails Factory setting m SupplyCarelInstallDir data localMailStore cm mail max size KB Maximum size of
20. FXA320_FT1 _4_ 20m4 1 max1 unid FX4320_FT1 _4_ 20m4 1 desc unid FX4320_FT1 _4_ 20m4 1 msq unid FX4320_FT1 _4_ 20m4 1 u1 unid FXA4320_FT1 _4_ 20m4 1 hlsts1 unid FX4320_FT1 _4 20m4 1 hltime1 unid FXA320_FT1 _4_ 20m4 1 vtime unid FX4320_FT1 _4_ 20m4 1 _time unid FX4320_FT1 _4 20m4 1 _ctime Description ank lewel oftesttank 1 Uncheck the Edit checkbox on the Measure Points panel Click the Save button to save the Click the Close button to close the program You can now upload the generated XML Configuration File within SupplyCare Enterprise Load Loads an already existing XML Configuration File m Disconnect Disconnects SupplyCare Enterprise from the OPC Server m Language Selects another language m Help Information about the version and documentation m Remove Removes the selected device or measure point m Remove all Removes all devices or measure points m Refresh Updates the current Value Time stamp and Quality of the measure points of the selected device 193 16 Extending the license and searching for updates SupplyCare Enterprise SCE30B 16 Extending the license and searching for updates 16 1 Extending the license A SupplyCare Enterprise license is issued for a max number of tanks Exceeding this number the following message is shown on creation of this tank You can not insert more tanks Your license agreement is limited to Number of tanks For more tanks the license can be extended Therefore
21. Found OPC Servers 4 Local Softing Easy Connect Configuration1 gt a PCMNTDOMO2 Selected OPC Server Specify the address of the external OPC server for this server connection The address must always be specified in one of the following formats opcda lt HostName gt lt ProgramID gt ClassID or opcda lt IPAddress gt lt ProgramID gt ClassID Address opcda 127 0 0 1 Softing OPCToolboxDemo_ServerDA 1 2E565242 8238 11D3 842D 0008C779D775 Authentication On this wizard page the user authentication for the external server can be activated and configured by providing a corresponding user name and password Activate Authentication Activate or deactivate the user authentication for the external server and prove a corresponding user name and a corresponding password User name Password Connection Test Use the button on the right side in order to test the connectivity to the corresponding external server Endress Hauser SupplyCare Enterprise SCE30B 15 OPC Connection 11 If everything went right the next window with the message Connection test successful Shall come up Click OK b Server Connection Test Address opada i 127 0 D 1 Softing OPCToolboxDemo_ServerDA 1 2E565242 B238 11D3 842D 0008C 7790775 User lt not specified gt Received parameters State 1 Start time 15 01 2014 22 55 47 320 Current time 15 01 2014 22 55 47 380 Vendor info Softing OPC
22. Google Maps registration 2 Inthe e mail body write down or copy the following Dear Endress Hauser IMS Team we would like to register our SupplyCare Enterprise Professional version for the usage of the Google Maps option within the Endress Hauser Google Maps ID according to the Terms and Conditions in the SupplyCare Enterprise license agreement Customer YOUR COMPANY NAME Customer email for contact YOUR_EMAIL OMY_ COMPANY COM SupplyCare Enterprise Serial No XXXXXXXXXXX SupplyCare Enterprise Server PC URL domain namejin your network 192 168 1 1 Thank you YOUR NAME 3 Please note that the Serial Number for your SupplyCare can be found on the back of your CD case on a sticker Ser no Also the domain name or IP address can be as an example http myintranet and http 192 168 1 1 4 Our support team will process your request as soon as the information is verified Please note that the registration process is a one time action and can take some working days as the process has to be accepted by Google Endress Hauser SupplyCare Enterprise SCE30B 10 Viewing tank locations on the map Map workplace m If you would like to purchase and use your own Google Client ID for a fee please feel free to directly contact Google Enterprise Support Any questions in regard of how to use the client ID may be addressed to your local Endress Hauser sales office You can use this menu item to get an overview of the location
23. Secondary 6 Secondary 7 Secondary s In this tab you have the ability to either select a tank created earlier or create a new tank Selecting a tank created earlier 1 Select a tank created earlier in the Tank name field If the selected tank is a standard type of tank the Standard tank checkbox is automatically enabled If the tank is a recycling tank the Recycling tank is enabled 2 Ifa description has already been stored for the selected tank the description appears automatically in the Tank notes field You can add a description in the Tank notes field Measure point details Assign measuring points to tank H x Tank name IC Waste Tank type Standard tank Tank notes Material Safety Instructions must be signed off fo Recycling tank Gateway Device Measure point Primary EU Operations Device 1 1 Secondary 1 EU Operations Device 5 1 Secondary 2 Secondary 3 Secondary 4 Secondary 5 Secondary 6 Secondary T 4344547040 Secondary 8 Notice m Each measuring point can be assigned only once at most to a tank If no unit has been set for the tank the Unit for application is taken as the tank unit when assigning a primary measuring point gt See Page 155 m You can assign a primary measuring point to a tank only if the tank and the measuring point have compatible engineering units e g length volume weight units etc If compatible engineering units are not us
24. Setup 2 Studios Startup Delaver Accessories Administrative Tools Borland C Builder 5 CA Endress Hauser Mozila Thunderbird r2 Studios Softing OPC Easy Connect SOuirrel SOL Client p Startup Delayer 2 3 build 134 Setup ance 188 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 6 7 8 Click the Finish button f Startup Delayer 2 3 build 134 Setup 40 V Filter All Users 00102738 M pmm AutoUpdate Monitor C Program To Delay an Application Drag and Drop it here Enter for Delay a delay value Edit Program i e g 5 minutes er Ca Program Filestsoftinq ETC Ttray exe EN IO o E osje s o0 pa E Ley C Program Files SottingOCT El uf E PC 15 OPC Connection 189 15 OPC Connection 190 SupplyCare Enterprise SCE30B 9 Click the Save button 10 Click the Save button 11 Close the Startup Delayer program 15 3 Starting the OPC Configurator Tool 1 Copy the directory scOpcConfigurator from the SupplyCare Enterprise Installations CD onto your PC 2 Start the OPC Configurator Tool with a double click on file setOpcConfigurator exe 3 Click the Connect button to connect SupplyCare Enterprise with the OPC Server Il scOpcConfigurator o is 0 x Pp on f 1 pa Li ss Hauser Close New Save as Connect Gateway BB edit OPC Server Disconnect Language Help Paramete
25. SupplyCare Enterprise SCE30B Description Capacity The capacity of the tank is specified in the Configuration menu in menu item Tank field Capacity The number of places after the decimal point is defined in the Configuration menu Unit menu item PP plan point Tank plan point The field can also be displayed for existing secondary values The plan point of the tank is specified in the Configuration menu in menu item Tank field Plan point The value entered in the Secondaries tab is used here for secondary values The number of places after the decimal point is defined in the Configuration menu Unit menu item SP ship point The ship point of the tank is specified in the Configuration menu in menu item Tank field Ship point If the Recycling check box is enabled the ship point is not displayed The number of places after the decimal point is defined in the Configuration menu Unit menu item SST safety stock Tank safety stock The field can also be displayed for existing secondary values The safety stock of the tank is specified in the Configuration menu in menu item Tank field Safety stock The value entered in the Secondaries tab is used here for secondary values The number of places after the decimal point is defined in the Configuration menu Unit menu item Hysteresis The hysteresis serves to prevent constant event messages e g due to a flu
26. Surname of user Login allowed If the Login allowed check box is activated the fields Login Name Password and Password confirmed are displayed Once the Login allowed has been deactivated the fields Login Name Password and Password Confirmed are no longer displayed Users for whom the Login allowed checkbox has not been activated have no login authorization and do not received notification e mails Password password the user has to enter the first time he she logs in Confirm password Language E mail obligatory Phone Fax Mobile Company obligatory The company is automatically pre populated Endress Hauser 83 11 Managing master data 84 SupplyCare Enterprise SCE30B Street City Zipcode State Country 8 Click EJ to save your entries Click 4 to abort the process 9 Select the User roles tab to assign a role to the user see Page 84 10 Select the Tank groups tab to assign a tank group to the user see Page 85 11 2 2 Assigning user roles and setting up alarms via e mail One or more user roles can be assigned to a user in the User roles tab The user receives different authorizations depending on the user role Refer to Page 16 and Page 196 User with the user role System administrator can also specify whether the user should receive alarms via e mail ice es roles System administrator Technical system administrator and Loc
27. Tank details Tank list Tank freeze Tank groups Tank notes H x Assign Name Description gt All Tanks EU Operations Fj APAC Operations F US Operations BBE of 17 Activating the check box in the Assign column assigns the tank to a tank group 18 Click El to save your entries Click 4 to abort the process 11 4 2 Selecting and deleting a depicted tank shape Selecting a depicted tank shape In the Tank details tab you can select a graphic depicting the appropriate tank shape for a tank created The selected graphic is also displayed in the Workplace Tank view in the Tank details tab e Click the Configuration menu in the Navigation window Click the Tank menu item select the Tank details tab Click the button The tab is displayed in the edit mode Click the button The Select tank picture dialog box is displayed Click the picture of the tank shape that applies for the tank you created Se a A AA A The selected graphic is added to the Tank details tab 10 Click E to save your selection Click to abort the process Deleting a depicted tank shape 1 Click the Configuration menu in the Navigation window Click the Tank menu item Select the Tank details tab Click the button The tab is displayed in the edit mode Click the Ml button in the Tank shape graphic The prompt Do you really want to delete is displayed oe a ee E Click OK to delete the graphic The No tank p
28. The screen views depend on personal settings and on the application 2 System description Inventory Control with SupplyCare SupplyCare Enterprise SCE30B Indication of inventory data Management of master data Reports and connection to ERP Systems Event management Alarm messages Retrieval of measured values 10 SupplyCare Enterprise SCE30B 2 System description SupplyCare Enterprise SCE30B comprises Software components and information within the field of Inventory Control SupplyCare can collect and visualize inventory availability consumption and needs of the tanks and silos online This allows the rationalization of business and logistic processes and the reduction of inventory and stockout From onsite measurement and global remote data transmission and visualization to integration in ERP systems SupplyCare offers a universal standards based solution SupplyCare is modular in design The modules Basic Advanced and Professional contain the following functions Basic Configurable overview page History and forecast CSV download Notifications Advanced Configurable overview page History and forecast CSV download Notifications Graphics Event Management Report configurator Professional Configurable overview page History and forecast CSV download Notifications Graphics Event Management Report configurator scheduling Totaling Analysis Map SupplyCare Enterprise SCE30B is a
29. contact your Endress Hauser sales office Notice Yaaa After extending the license enter the new license key into SupplyCare Enterprise The System administrator only can enter the new license key 1 Click the About link in the header 2 The following screen appears SuppliyCare Enterprise SupplyCare Enterprise Edition Version info Version 02 06 01 Serial number S N License 32 tanks tanks in use 5 3 Click on To License Page 4 The following screen appears SuppliyCare Enterprise Edition SupplyCare Enterprise Edition Please enter the license Login name Serial number S N License key KEY Save Cancel 5 Enter the Login name Serial number S N and the new License key KEY Click the Save button 7 Now further tanks can be created 16 2 Searching for updates SupplyCare offers the possibility to check whether there are any updates If this is the case and you want to update your version of SupplyCare Enterprise please contact your Endress Hauser sales office 1 Click the About link in the header 2 The following screen appears SupplyCare Enterprise SupplyCare Enterprise Edition Version info Version 02 06 01 Serial number S N License 32 tanks tanks in use 5 To license page Check for updates 194 Endress Hauser SupplyCare Enterprise SCE30B 16 Extending the license and searching for updates 3 Click on Check for up
30. predefined Amount Enter the planned amount Range This field shows the number of days before the safety stock is reached for the amount entered In the case of standard tanks the number of days is calculated from the Average daily outflow value In the case of recycling tanks the number of days is calculated from the Average daily inflow value Refresh range Via the rey button the Range field is updated for the amount entered Comment Enter a comment or note Click to save your changes Click 4 to abort the process A delivery van icon indicates the delivery and disposal in the inventory chart If you move the cursor over the delivery van field information on the planned delivery or disposal is displayed along with the delivery date and time Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace 5 Viewing personalized tank view My tank view workplace The personalized tank view shows you the tanks that you selected in your user profile in the My tank view tab see Page 175 Notice Mojo The My tank view menu item is available to people with Read only Scheduler or Operator configured as their user role 1 Click the Workplace menu in the Navigation window 2 Click the My tank view menu item 3 You are shown a list of all the tanks which you selected in the user profile El Configure My tank view G Unit Time zonel Location
31. to Google Maps service in conjunction with SupplyCare Enterprise Professional version For purposes of testing of and familiarizing with Google Maps Endress Hauser provides its customers with Endress Hauser s Google ID upon request Today customers may moderately use the Google Maps Service at no extra cost but Google has restricted the possible number of sessions to Google Maps service under Endress Hauser s Google ID Topping such maximum number sessions to Google Maps under Endress Hauser s Google ID may lead to a sudden shut down of Google Maps service for Endress Hauser s Google ID users In case a customer needs or expects massive usage of Google Maps service it is recommended that it considers purchasing its own and individual Map ID from Google Any questions in this regard may be addressed to your local Endress Hauser sales office Endress Hauser reserves the right to extend restrict or deny further usage of Endress Hauser s Google Maps ID depending on an actually occurring mass of usage Endress Hauser is by no means obligated or required to neither extend nor grant any usage of its Google Maps OEM license to any third party or Customer not having signed the SupplyCare Enterprise license agreement with Endress Hauser In order to register for using the Google Maps service under Endress Hauser s Google ID within the above terms follow these steps 1 Send an e mail to inventory pcm endress com with the subject SupplyCare Enterprise
32. y Hef a q le tetai om e 3 2 3 Navigation window Menus Depending on the user role the menus Workplace Configuration System Administration and Profile appear Notice Multiple user roles can be assigned to a user at the same time The menu tree is then made up of the menus for the user roles in question Navigation window Clicking a menu expands or collapses this menu The active menu is highlighted in blue 15 3 User interface SupplyCare Enterprise SCE30B Menu items The menu is made up of various menu items depending on the user role in question The following table lists the menu items depending on the user role selected Notice The menu items in the Workplace Configuration and Profile menus differ as a result of SupplyCare s modular design Menus User Role Workplace Configuration System administration Cockpit Profile Read only Tank m User profile My tank view m User preferences Event m Totaling Map Operator a Tank a User profile m My tank view User preferences Event Totaling m Analysis Map Scheduler Tank User profile m My tank view User preferences Event m Scheduling m Totaling m Analysis Map Master data User User Profile a Tank m Aggregated tank Location Company m Product a Unit m Tank Group Report Local User Gateway configuration Logged on users
33. 2009 15 04 45 Manufacturer Endress Hauser Connection state Connected Taq Test gateway 1 Clsld l 5C1BCBBF 8417 418F AAA9 CAD25F14F235 Description Test gateway 1 Server info Endress Hauser GmbH Co KG DA Version DA 3 OPC Server Model v Devices C r Name UniquelD aq Manufacturer Description Mode Connection device2 device2 devices device3 Test device 2 Test device 3 Endress Hauser Endress Hauser device2 devices Measure points J edit Add UniquelD ac ime Stamp Quality Jresourceldentification Description unid FXA320_FT1 _4__20m4 1 hh1 mp2 mp3 mp3 unid FX4320_FT1 _4_ 20m4 1 hi1 mp4 mp4 unid FXA320_FT1 _4 20mA 1 101 mp5 mp5 unid FX4320_FT1 _4_ 20mA 1111 mpb mpb unid FX4320_FT1 _4_ 20m4 1 t1 ch1 mp mp unid FXA320_FT1 _4_ 20m4 1 t2ch1 mp mps mp unid FXA4320_FT1 _4 20m4 1 min1 mpg mpg mp9 unid FX4320_FT1 _4_ 20m4 1 maxl mp10 mp10 mp10 unid FxXA320_FT1 _4_ 20m4 1 desc mp11 mp11 mp11 unid FX4320_FT1 _4_ 20m4 1 msq mpl12 mpl2 mp2 unid FX4320_FT1 _4 20mA 1 u1 mp3 mpl3 mpl3 unid FX4320_FT1 _4_ 20m4 1 hlsts1 mpl4 mpl4 mpl4 unid FXA4320_FT1 _4_ 20m4 1 hltimel mpl5 mpl5 mpl5 unid FX4320_FT1 _4_ 20m4 1 time mpl6 mpl6 mpl6 unid FXA4320_FT1 _4 20m4 1 _time mpl unid FXA320_FT1 _ 4 20m4 1 _ctime Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 15 OPC Connection 18 Check the Edit checkbox on the Measure Points panel to enter the UniquelD Tag Un
34. 3 The following detail view is displayed in the Application window Configuration gt gt Aggregated tank Product All Buyer All Supplier All El oneee Tank list Tank freeze Tank groups Tank notes k w pia Tank name IC 03 mix a Location HO Buyer Buyer 46 Supplier Supplier AG SDT 5 Days Product Product IC 030 m Use product unit Tank type Standard tank Recycling tank ADIADO based on 14 Days Include negative values Activate forecast O Click the k button 6 The tab is displayed in the edit mode H 3 C O TE C E supplier I sor C Product E Use product unit Tank type Standard tank Recycling tank AWADO based on Days FP Include negative values Activate forecast picture selected la No tank 7 Here you can enter data on the aggregated tank such as Tank name obligatory Location select the location from the picklist Buyer select a buyer company from the picklist Supplier select a supplier company from the picklist SDT Standard delivery disposal time Product select a product from the picklist Use product unit if this option is activated the unit of the selected product is automatically used in the Unit field Capacity 750000 Optimum 38000 Plan point 20000 Ship point 15000 Safety stock 3500 Hysteresis 0 Unit l In the lower section of the app
35. 3 0 4 TANK_01 11 14 10 6 43 AM 1 757 0 0 0 0 1 7 0 3 0 1 TANK_01 11 14 10 6 52 AM 6 0 0 0 0 1 7 0 3 0 2 TANK_01 1 14 10 7 01 AM 2 0 0 0 0 1 7 0 3 0 3 TANK_01 11 14 10 7 10 AM 29 C 0 0 0 0 1 7 0 3 0 4 TANK_01 11 15 10 6 46 AM 1 754 0 0 0 0 1 7 0 3 0 1 TANK_01 11 15 10 6 55 AM 7 0 0 0 0 1 7 0 3 0 2 TANK_01 1 15 10 7 04 AM 3 0 0 0 0 1 7 0 3 0 3 TANK_01 1 15 10 7 13 AM 30 C 0 0 0 0 1 7 0 3 0 4 TANK_02 1 13 10 6 40 AM 2 76 1 10 0 80 7 0 3 0 0 0 0 1 TANK_02 1 13 106 49 AM 2 5 10 0 80 70 3 0 0 0 0 2 TANK_02 1 13 10 6 58 AM 31 10 0 80 70 3 0 0 0 0 3 TANK_02 1 13 10 7 07AM 2 8 eC 1001 80 7 0 3 0 0 0 0 4 TANK_02 11 14 10 6 43 AM 2 757 1 10 0 80 7 0 3 0 0 0 0 1 TANK_02 11 14 106 52AM 2 6 10 0 70 70 3 0 0 0 0 2 TANK_02 1 14 10 7 01 AM 32 10 0 7 0 70 3 0 0 0 0 3 TANK_02 1 14 10 7 10AM 29 eC 10 0 70 7 0 3 0 0 0 0 4 TANK_02 11 15 10 6 46 AM 2 754 1 10 0 80 70 3 0 0 0 0 1 TANK_02 1 15 106 55AM 2 7 10 0 80 70 3 0 0 0 0 2 TANK_02 1 15 10 7 04 AM 33 10 0 80 70 3 0 0 0 0 3 TANK_02 1 15 107 13AM 3 0 C 10 0 80 7 0 3 0 0 0 0 4 Notice m The language of the header of the CSV file depends on the language setting in the browser m The table is sorted first by tank name then by time stamp The UTC 00 00 time zone is always used for the time stamp m The column R provides information about the tank type 0 stands for standard tank 1 stands for recycling tank m The date and tim
36. 4 2 Editing tank service status Notice Only users with the Operator user role can specify or change the service status of a tank All other user roles can only read this tab If a tank is out of order for a service this is shown in the tank overview table by the sg symbol for individual tanks and the seh symbol for aggregated tanks Measured values are no longer updated Notifications of tank events are no longer produced e Click the Workplace menu in the Navigation window 2 Click the Tank menu item A list of the tanks assigned to you is displayed 3 In the overview table select the tank whose service status you want to edit 4 In the lower section of the application window select the Tank service status tab Location detaile Tank service status Inventory chart Tank details Notes and files Tank partners Download history From date To date Comment 5 Click the button 6 The tab is displayed in the edit mode 7 Select a time in the future when you want to put the tank out of service You can either enter the date directly in the Start date and End date fields or use the E button When entering the date directly use the dd mm yy format The UTC 00 00 time zone is used for the start and end date Sea If necessary enter a comment in the Comment field Click E to save your changes Click to abort the process n Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser
37. 7 days G I liter Show Waste Temperature The inventory chart displays the graph for the primary value 5 Click the Show Name button beneath the chart Depending on the number of secondary values that have been assigned to the tank the appropriate number of Show Name buttons are displayed beneath the inventory chart Click the Hide Name button to hide the specific graph Notice Meyi Click the m button to print the inventory chart m f you move the cursor over the graph the specific value and time stamp are displayed for the individual point in the graph Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 3 User interface 4 43 Viewing secondary data via the Tank details tab 1 Click the Workplace menu in the Navigation window Click the Tank menu item In the table click the tank for which you want to display secondary data select the Tank details tab Click the button beside the Value field E a The following screen appears Unit Time stamp 3 000 0 1 6 22 12 12 00 PM 16 5 7 6 22 12 2 41 PM 339 7 6 22 12 2 44 PM 8 9 6 22 12 2 45 PM 22 4 7 612202 2 32 Phl The magnifying glass cannot be selected in the following cases No secondary values are assigned to the selected tank m The tank supplies a faulty measured value m The tank is out of order m The tank is assigned to an aggregated tank 4 5 Viewing historical values and forecast values i
38. Data user role can specify a name via the Secondaries tab in the Tank menu item This name is used in the overview table for the button and the graph If no name has been entered the secondary values are given the default names Secondary 1 Secondary 2 secondary 3 Secondary 4 Secondary 5 Secondary 6 Secondary 7 and Secondary 8 1 Click the Workplace menu in the Navigation window 2 Click the Tank menu item 3 In the table click the tank whose secondary data you want to display in the Inventory chart tab 4 The following detail view is displayed in the Application window Workplace gt gt Tank El Hide details Unit Time zone Location Tank group All Product All Supplier All Location All State lt Tankname Location lt Product lt Level lt Value Unit lt Timestamp lt Time zone lt J E IC Waste EU Operations UK Waste IC 011 30 E 3 000 0 I 3 27 12 12 00 PM UTC 01 00 Waste Temperature 3 000 0 C 3 2712 12 00 PM UTC 01 00 J IC Waste Il EU Operations PL Waste IC 011 30 D 3 000 0 3 2712 12 00 PM UTC 01 00 J IC Waste Ill EU Operations ES Waste IC 011 30 D 3 000 0 I 3 27 12 12 00 PM UTC 01 00 LHG 01000 APAC Operations SG Product LNG 010 bx 1 000 0 1 3 272 6 16 PM UTC 08 00 J 3 2 5 of 10 Tank details Notes and files Tank partners Location details Tank service status Event details Download history Capacity 100 0 Time zone UTC 05 00 Scaling Min Max Period selection
39. Ifthe value for Safety stock is O the Safety stock reached field is 0 Average safety stock reached Standard tanks Average value by which the safety stock was undershot for the period entered Recycling tanks Average value by which the safety stock was exceeded for the period entered If Safety stock has been disabled the Average safety stock reached field is empty If the value for Safety stock is 0 the Average safety stock reached field is 0 75 9 Viewing analysis data Analysis workplace SupplyCare Enterprise SCE30B 9 4 Chart hourly This chart shows the outflow inflow or the difference between the inflow and outflow for the period selected depending on the option selected KPla Outflow Inflow Chart daily Period selection 1 day Time zone UTC 01 00 B15 0 06 0 125 0 05 0 1 0 04 T ae E a 0075 0 03 4 a m Y 2 ae a 0 05 0 02 0 025 0 01 0 0 00 00 06 00 12 00 13 00 21 Jun 21 Jun 21 Jun 21 Jun M4 44 3 SER 5 M W aiio El Ms onh delta g ila Column he Mn C EEN Line Select the period of time for Chart hourly via the Period selection field You can select a period of 1 2 3 4 5 6 or 7 days Select the type of chart via the Column or Line buttons If you move the cursor over a graph in the chart a window appears with the name of the graph the specific measured value and the time stamp 76 Endress Hauser SupplyCare Enterpris
40. Next button The Column selection dialog box is displayed Step 2 out of 6 Column selection Select the columns Available columns Assigned columns A y C Columns a Columns C Tank name E Standard deliver disposal time gt gt L Time zone Time zone of Location F Value Ea C unt F Free Fi Capacity F Optimum of BHE of w O Include secondary values O Add column names as headers Back Next Cancel 7 Here you can select the information columns which should be analyzed in the report Available columns this lists all the columns that can be analyzed in the report If you want to add a column enable the check box for the corresponding column and click the gt button If you want to select all the columns enable the uppermost check box beside the columns Assigned columns this lists all the columns that are analyzed in the report If you want to remove a column enable the check box for the corresponding column and click the button If you want to select all the columns enable the uppermost check box beside the columns If you want to change the order of the columns select the corresponding column and click the or we button Include secondary values the secondary values are also displayed Add column names as headers the column names are used as headers Header language choice of language for the column names in the header of the report The language from your user pr
41. Product XXX ABC Product ZZZ ABC Product Waste XYZ Product ww XYZ Product ww Waste IGEN HH Product details Used in tanks L w A Product name ABC Product XXX Density 1 0000 kg Identifier 121212 Formula Identifier agency Other Alias unit Description Consistency Solid Liquid Unknown 4 Inthe lower section of the application window select the Product details tab 5 Click the _ button 6 The tab is displayed in the edit mode Product details Used in tanks E x Product name Density kg fl Identifier Formula Identifier agency Other Alias Unit l Description Consistency O solid O Liquid Unknown Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data Here you can enter data on the product such as Product name obligatory unique identifier of a product Identifier unique product ID to be used in the CIDX reports Identifier agency obligatory selection of organization responsible for managing the identifier for the companies The selection complies with the CIDX standard The identifier agency is required to create CIDX reports Units obligatory Consistency Density obligatory the unit can be selected Formula chemical formula of the product Alias another name for the product e g tradename etc Description you can enter a multiline description here Click El to save
42. This parameter corresponds to the User name field in the Incoming tab in the E mail connection menu item User entry m A text e g myUserName server throttleEmailToAdmin To avoid multiple mail dispatch to the administrator the e mails are grouped and then sent to the administrator This value indicates the interval in ms in which the e mails are sent Input range m to 9223372036854775807 integer Factory setting m 300000 ms system proxy address Standard value for the Proxy address field in the Gateway configuration menu item for the HTTP communication version User entry m A text e g proxy mycompany com system proxy password Standard value for the Proxy password field in the Gateway configuration menu item for the HTTP communication version User entry A text e g proxyUserPassword system proxy port Standard value for the Proxy port field in the Gateway configuration menu item for the HTTP communication version Input range m 0 65535 Factory setting empty system proxy used Standard value for the Is using a proxy field in the Gateway configuration menu item for the HTTP communication version User entry TRUE FALSE not case sensitive Factory setting m FALSE 131 12 System administration 132 SupplyCare Enterprise SCE30B Key Description system proxy user Standard value for the Proxy user field in the Ga
43. User Profile system administrator m Linearization Logon history m FIS gateways Gateway report m Alarm a Tank report m System properties a Contract report m Notifications Messaging System administrator User m Gateway configuration Logged on users User Profile m Linearization Logon history m New gateways m Gateway report m FIS gateways m Tank report m Alarm m Contract report m System properties m Notifications m E mail connection Messaging 1 Only users with the Operator user role can change the tank service status 2 Only users with the Scheduler or Operator user role can change the status of an event 3 In the System properties menu item the Contract properties UI Customizing and Modules tabs are displayed to users whose role is configured as Local system administrator 4 In the Units menu item the Customer specific unit tab is shown to users whose role is configured as System administrator or Local system administrator with the additional role of Master data In the Units menu item the Details tab is displayed only to users whose role is configured as Master data 16 Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 3 2 4 Application window The content of the Application window varies depending on the menu item selected The active menu item is highlighted in blue Notice As a result of SupplyCare s modular design the contents of Overvi
44. a tank freeze event is generated Unit Displays the unit configured for the tank capacity if Delta calculation is set to absolute Displays otherwise Time zone Select the time zone to be used for the monitoring times configured under Repetition rule Repetition rule obligatory Select a rule for the repetition of the monitoring time Daily Select a From time start time and a To time end time for the daily monitoring for tank freeze events The From time must represent an earlier time point than the To time For a daily monitoring time from a time point before midnight and after midnight configure a Weekly on every repetition rule Weekly on every Configure monitoring times for tank freeze events for each weekday individually For more details on the configuration of the Weekly on every repetition rule refer to the following chapter Configuring the Weekly on every repetition rule See Page 95 7 Click E to save your configuration Click E to abort the process Notice Waa Use the Copy to other tanks button to copy the Tank freeze configuration to other tanks For more details refer to the chapter Copying the Tank freeze configuration to other tanks gt See Page 96 Configuring the Weekly on every repetition rule Configure monitoring times for tank freeze events for each weekday individually Endress Hauser 95 11 Managing master data SupplyCare Enterprise SCE30B Tank details S
45. a user setting 177 Setting the resubmission date ooooooo o o 59 Setting up e mail notification 111 SMP PON A E aenae aina east ee 39 SP Sp DON eeta deerat id a a 36 Sol Saiety OCE erat Tea a ea a ERN 36 Standard delivery UME e idad 36 Standard delivery time in days or hours 38 Standard disposal MMC s osos ra stn end a See wnans 36 SCAN GANA TANKS ug sh 9 ust asa ane ee wat Oe NS 37 Standard Tank s aaee aa OO AEO AN E ds 64 Star une the probra iodo aldeas 13 Startup Delayer Installing and confi Turing aro 187 O IN 35 SO acne Oe a 36 SSEM AdS AOE 3 0 ne etn ae Paw REER 16 196 AAA aa ee oe oe BEE Bes 10 Syse PTOP TESS asia Ss es eas 124 Endress Hauser SupplyCare Enterprise SCE30B T M LLLE E EEEE E alts Scare gl es Dee hod Bacal Ded 86 SICA TTI ra a mig ar enie ines ab tudube Broce deaeiees Ana s 111 Tank detal ica ed 38 89 100 102 A A A tn ta T SRA 94 Tam CLOUD ess no O AA 110 Tank group assignment rarae nea daa 175 Fank OT OU Mier yl E ES 177 Tank Brouss A 84 90 93 101 103 110 Tane E A A GHENEA 101 Fank Nae epi ata tios 35 38 73 Hl ANI TOUS yh tk oe cera aera heck ue uid EE 97 103 ST Ae INC ie 5 Seclcare ah daa 40 Tank service Status iii 20 S ee a 41 42 Tame setap Wiz rra en al 86 am gs 0 enuan reg A er NA 102 Tanks at UO AMON tee uh Se Pace syed EO hele heat cate E dete sa ch aed 106 Technical improvements a SUS a 8 Testevente mall
46. an engineering unit from the list User description Linearization table name A previously created linearization table can be selected here see Page 158 After the name of the linearization table has been selected it is automatically filled with values for the Index Input level and Input volume Unit for scaling and Linearization for scaling After the Linearization table has been activated a second linearization can be selected The Scaling table is activated by selecting a Unit for scaling and making a selection in the field Linearization for scaling Unit for scaling corresponds to the unit to be used for scaling After Linearization for scaling has been selected the Scaling table is automatically filled with values for the Index Input and Scaled 155 12 System administration SupplyCare Enterprise SCE30B The Scaling table is required for example when a measuring device delivers a number only The inventory level is then derived from the Linearization for scaling and the associated volume from a further linearization of the level value For example Measure point details Assign measuring points to tank Tank details B x Name 1 Device tag _Binary 1 Unique ID 1 Description Unit for application gal Unit from device Count Last measured value 3276 000 Measuring point tag User description The selected measure point has to be assigned to a tank
47. back above the limit value for the Plan point No new event is triggered The status for event a remains Open The tank status switches to Plan point reached yellow No new event is triggered as the level has not first fallen below the limit value for the Plan point minus the hysteresis The level falls below the limit value for the Plan point minus the hysteresis Event a now assumes the status Done The level climbs back above the limit value for the Plan point A new Plan point reached event is triggered The status of the event is set to Open 91 11 Managing master data SupplyCare Enterprise SCE30B 11 3 2 Selecting and deleting a depicted tank shape Selecting a depicted tank shape In the Tank details tab you can select a graphic depicting the appropriate tank shape for a tank created The selected graphic is also displayed in the Workplace Tank view in the Tank details tab Notice m The Vertical bar i and Horizontal bar EEE tank pictures can be used if you prefer general symbols The Digital display tank picture HEE can be used if you prefer the value to be displayed in digital format Please note that the digital display can show a maximum of 17 digits including commas and thousand separators If the value is longer than 17 digits some or all of the decimal places are not displayed If the value can still not be displayed with 17 digits even when the decimal places are omitted the
48. chart filter max measurements Maximum number of displayed values in the inventory chart Input range m to integer Factory setting 1500 gui chart scaling Selection of the kind of scaling used for the display in the Inventory Chart Selection a Min Max or Auto Min Max displays the inventory between 0 and Capacity Auto displays the inventory between the smallest and largest displayable value including forecast values Factory setting m Min Max Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser Key 12 System administration Description gui chart pdamount Choose whether the planned quantity of a delivery disposal is included for the forecast in the Inventory Chart tab Selection Exclude or Include Factory setting m Exclude gui chart period default This value corresponds to the Period selection field Workplace gt Tank gt Inventory chart Workplace Event gt Inventory chart The inventory charts are displayed for the period configured here Selection m 2 days 7 days 14 days 30 days or 90 days Factory setting a 7 gui template Selection of template type that is displayed on the user interface The functionality of the two possible template types is exactly the same Depending on your selection the descriptions in the menu in Overview and in Detailed view change as well as the symbols and tool tips Selction
49. details Notes and files Location details Tank partners Event details Freeze event details Download history Capacity 100 F5 percent LA o 25 100 0 Time zone UTC 05 00 H 44 a A Scaling Min Max Period selection 30 days 5 7 5ep 45p 11 5p 13 5p 15 5p 17 5p 19 5p 2 S5ep 2 3 5ep 25 5ep 27 Sep 29 Sep rl Via the Scaling field choose between the minimum maximum scaling and automatic scaling If Min Max is chosen the inventory is displayed between 0 and Capacity Auto displays the inventory between the smallest and largest displayable value including forecast values Select the period of time for the inventory chart via the Period selection field The current limit values are specified as horizontal lines in various colors Color Standard tanks Recycling tanks Range between the Optimum and Plan point limit values Range between Empty value 0 and the Plan point limit value Range between the Plan point and Ship point limit values Range between the Plan point and Safety stock limit values Range between the Ship point and Safety stock limit values not present Range between the Safety stock limit value and Empty value 0 Range between the Safety stock and Capacity limit values Notice m Click the button to print the inventory chart m f you want to zoom into a specific period see Page 49 37 3 User interface 30
50. for recycling tanks Click the E button The dialog box appears in the editing mode Enter the desired amount in the Amount field For the Delivery date and time field select a new date and time Enter a comment or a note for the Comment field Click El to save your changes Click to abort the process Deliveries and disposals are entered in the calendar with a delivery van icon and the planned amount The delivery date and time are displayed when you move the cursor over this field 7 4 1 Viewing a planned delivery or disposal and saving as an Excel 2 A A spreadsheet Click the Workplace menu in the Navigation window Click the Scheduling menu item Click on the Planning tab In the overview table click the tank for which you want to display the deliveries or disposals Click the Planned delivery Planned disposal tab The following detail view is displayed in the Application window Plan delivery disposal Planned delivery disposal delivery disposal Time zone UTC 05 00 JUnit El PD gt PD Amount gt Comment 30 03 11 12 00 10433 8 za 4 of 1 ie 8 All the deliveries or disposals for the selected tank are listed in the table with information on the date PD column amount PD amount column and a comment Click the button to download the table as an Excel spreadsheet 67 68 5 Viewing personalized tank view My tank view workplace SupplyCare Enterpris
51. have been performed Factory setting 86400 seconds input range 1800 to 86400 seconds Check all events for resubmission interval after which the system checks whether the resubmission date for an event has been reached Factory setting 300 seconds input range 300 to 86400 seconds Check all measurements for errors interval after which the system checks whether a gateway a measuring device or a measuring point has an error status Factory setting 600 seconds input range 600 to 86400 seconds Run garbage collector job interval after which a garbage collector job is performed Factory setting daily Check number of incoming measure values interval after which the number of incoming gateway e mails is checked This test checks the function of the gateways In this case a check is carried out to establish how many e mails have arrived The number has to be within the given tolerance If the number is off the given tolerance the status is et to no measured data and the appropriate icon is shown in the tank overview workplace Endress Hauser SupplyCare Enterprise SCE30B 12 System administration Tank If there is no tolerance with the following test job i e normally the other day the status is reset to OK Factory setting hourly see Page 150 Calculation of forecast data read only The appropriate service is activated or deactivated by the Enabled check box In the Interval field en
52. limit is exceeded an alarm is triggered User entry m to 9223372036854775807 integer Factory setting m 300000 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser Key 12 System administration Description server adminEmail E mail address of the administrator All the system e mails such as alarms new e mail gateways found etc are sent to this address This parameter corresponds to the Admin E mail field in the Incoming tab in the E mail connection menu item User entry m Every valid e mail address server smtpHost Host address of the e mail server that sends e mails when events occur for example This parameter corresponds to the Host name field in the Incoming tab in the E mail connection menu item User entry m Text e g localhost Factory setting m localhost server smtpPassword Password for the e mail account for sending e mails e g when events occur This parameter corresponds to the Password field in the Incoming tab in the E mail connection menu item User entry m Text e g myPassword server smtpPort Port of the e mail server for sending e mails e g when events occur This parameter corresponds to the E mail server port field in the Incoming tab in the E mail connection menu item Input range m 0 65535 Factory setting m 25 server smtpUser User name for the e mail account for sending e mails e g when events occur
53. limit notification 12 6 4 Defining and editing PDL PDE notification Set up an e mail connection Creating new gateways configuring gateways and replacing gateways Gateway configuration menu 12 8 1 Creating new gateways 12 8 2 Configure gateways estra 12 8 3 Replacing a gateway Assigning a measuring point to a tank Managing linearization tables 12 10 1Creating changing and deleting a linearization table 12 10 2Displaying a linearization table as a graph 12 10 3Uploading a linearization table 12 10 4Uploading a linearization table as an Excellence Integrating and managing FIS gateways FIS gateway MENU esla aun end quate tesi 12 11 1Integrating FIS gateways 12 11 2 FIS gateways overview table Displaying and editing system alarms 12 12 1Table of alarm messages E mail error messages Faulty measured dala ooooooo ooo Creating new gateways for communication via e mail Endress Hauser Table of contents 12 16 Writing and sending messages messaging 174 13 Maintaining a profile 175 13 1 Maintaining a user profile 175 13 2 Changing a password esla 176 13 3 Selecting and changing user preferences 177 13 3 1 Description of the filters fields 177 14 Viewing the gateway report COCK DIL duna dae 180 15 OPC Connection 181 15 1 Configuring the OPC Bridge Wrapper 181 15 2 Installing an
54. lower section of the application window select the Location details tab 5 Click the _J button 6 The tab is displayed in the edit mode Location details Tanks at location Location notes E x Name Street Company City Manager Zip code Time zone State Country Latitude Longitude Calculate based on address 7 Here you can enter data for the location such as Name obligatory unique identifier of the location Company select the company from the picklist Manager Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data Time zone select the time zone for the location from the picklist All time data particularly time stamps for measurements for tanks at this locations are displayed in this time zone There is also the preferred time zone for users that is used for time information for events Street City Zipcode State Country Longitude and Latitude you can save the geographical coordinates for this location here see Page 105 These coordinates are used to display the location on the overview map see Page 78 Calculate based on address the longitude and latitude are calculated automatically see Page 107 These coordinates are used to display the location on the overview map see Page 78 Notice A prerequisite for the display of the fields Latitude and Longitude is a valid client 1D to use the workplace Map and the
55. mails and sent to a separate e mail server SupplyCare Enterprise collects these e mails from the e mail server and processes the included measured values The e mail server is not part of the standard scope of delivery E mail server SupplyCare Enterprise Application Server Windows Service Apache Tomcat SupplyCare Enterprise Running in Web Browser Scheduler Database Connection Manager a Endress Hauser Gateways Fieldgates send e mails Endress Hauser Measuring Devices 11 2 System description SupplyCare Enterprise SCE30B SupplyCare Enterprise offers and elegant method to create gateways As soon as a new gateway is linked to the measurement chain and sends e mails this gateway is automatically listed as a New Gateway Via the menu item New gateways listed gateways can be taken into the system Refer to Chapter 12 15 2 Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 3 User interface 3 1 Starting the program 1 Start your Web browser Internet Explorer and Firefox are supported 2 Specify the URL or IP address for SupplyCare You can get the URL or IP address from your network administrator 3 The following screen appears Please fill in the fields to login Login name Password 4 Enter your Login name user name and your Password Click Login to confirm your entries 6 The first time you log in you are asked to change you
56. new gateways o ooooooooooomooooooo 172 Creating setting up a report group 117 CSV IDO a da citing went alee a 116 Customers pecine Unit dai 115 Endress Hauser Index D LM ASI Sta tet NS 77 Daly INON aaa ee eye 73 74 Pay OIE ONM eeror date bere Sead EE 73 74 Days until the safety stock is reached 30 74 WC Teal Ume BOM Cr ii ose 177 Dele ert ke ot A EEEE TERAN 30 Delene aer rr a do e 99 Weletme master dala setos iia 30 Deliver detal yaari reece tee ue Uae eels oe 66 Delivery Status management 0 eee eee 60 ICSI SIAC C USC ogc ni a nin 8 DM o ah 73 Disposal detal a data Seid 66 Disposal Status management momo ooo 60 A Ge age Pee eee eu ea eee 13 Download MS a Hara dn 43 Oe pier oe aoe ee tee eee ee eae 36 E E mail error Messaten rota dida 172 A AO 55 57 60 o AA eee 41 56 58 A O A eT a 57 Event MOUMEGANONy as di cs 135 VEIS dai ii o eer oak tk 54 ExXtendine heen Se erstes pasa esas 194 F A A esate Gade bee ted eae i 11 Pier MOCO ii tad bus wares 25 A Wait aie Doce ou ete ceutte Losa Sek ed 164 ROTE CAS EVA UE lt a cere Let we 47 O diane ius a Gubard a habe ited eo 35 Frece ap CCUG ee ata een tits A es iecne On aa aL 39 Freeze event GElallS sl euer a 41 56 Freeze event MOUMCATION io red ia 138 Freguency of deliveries usaran oe 74 Frequency Ol disposa seseris nten ri 74 Fonda A ue th e a aN 36 G Gateway Configuration ais ida os 146 154 Gateway d
57. ra Product AI Buyer ANS Supper ANS Tankname 2 Location Hotes Product Capacity Unit Ic 02000 US Operations West Tank soll regelmalig alle 3 Product Ic 020 100 It 03000 HG Product i 030 20000 Ic Waste EU Operations UK Material Safety Instruction Waste IC 011 30000 Ell Jote E Endress Hauser 29 3 User interface 30 SupplyCare Enterprise SCE30B 3 6 7 Selecting all the rows in a table By activating the Assign check box you can select all the rows in a table 1 Click the button g 2 The specific tab is displayed in the edit mode Tank details Secondaries Tank freeze Tank groups Tank notes M Assign Name Description Select unselect all All Tanks e APAC Operations e EU Operations e US Operations BES of 4r F 3 Activate the Assign check box 4 Click El to save your selection Click E 4 to abort the process 3 6 8 Deleting master data Depending on your particular user role you can delete data records in the Company User Tank Aggregated tank Location Product and Tank groups master data Notice A data record can only be deleted if the m symbol is displayed in the tab If the symbol is not displayed the record is linked to other information These links must be disabled before the data record can be deleted The data for a tank are deleted in the following example Proceed in the same way for other master data 1 Click the Configura
58. side must be known m You can schedule up to five reports 1 Click the Configuration menu in the Navigation window 2 Click the Report menu item 3 The following detail view is displayed in the Application window Configuration gt gt Report El Name Description 2 Template Format Channel Enabled Global_IC_Report Tank snapshot report POF E mail o Global Waste Report Custom report XML HTTP O BEE 1 0 x Column selection Tank assignment iui Hrs ME EG dh Create new report Format selection General report information Channel configuration Scheduling Name Global_IC_Report Description Selecta template Tank snapshot report 116 Endress Hauser SupplyCare Enterprise SCE30B Format CIDX and CSV Validate CIDX Endress Hauser 11 Managing master data The generated CIDX and CSV files have the following format lt report name gt _ lt timestamp yyyyMMdd_HHmmss gt lt suffix gt Example report _20100505_1634031 xml CIDX The CIDX format used is InventoryActualUsage Version 4 The CSV files have the following structure Tank Time stamp Value Unit Optimum Plan point Ship point Safety stock name Tank 1 12 06 2009 17 20 920 0 1000 100 80 50 Once you have assigned the tanks to the report validation is performed to check whether the configuration complies with CIDX specifications The following checks are performed s a supplie
59. tab appears Time zone UTC 05 00 Time stamp gt State Message gt User 11 18 11 10 42 AM Ei New planned delivery i2468701 BEES of 62 Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace 7 3 Planning delivery and disposal Scheduling workplace Notice Only users with the Scheduler user role can plan deliveries for standard tanks and disposals for recycling tanks You can plan several deliveries for each standard tank but you can only plan a maximum of one delivery per day You can plan several disposals for each recycling tank but you can only plan a maximum of one disposal per day The time zone of the location of the tank is used as the time zone The unit of the tank is used as the unit In the case of mass units and volume units priority is given to your settings for the Mass unit or Volume unit fields in the User preferences menu item If a tank is out of service this is indicated in the calendar with a bar and the symbol No deliveries or disposals can be planned for this period Planned deliveries and disposals are indicated by a delivery van in the calendar and in the Inventory chart tab 1 Click the Workplace menu in the Navigation window 2 Click the Scheduling menu item 3 Click on the Planning tab 4 In the overview table click the tank for which you want to plan a disposal or delivery 5 The following detail view i
60. tank and by activating the Recycling tank checkbox you specify that the tank is a recycling tank The event messages and the way the inventory chart and levels are displayed are adapted to this tank type see Page 90 ADI ADO based on 14 days is the standard value specified here This period is used for extrapolating in the inventory chart see Page 37 Include negative values If this option is enabled negative measuring values are included in the ADI ADO calculations Activate forecast If this option is enabled a forecast of the inventory is displayed in the Inventory Chart tab The enabled forecast is displayed with a green button the disabled forecast is displayed with a red button This option can be changed in edit mode by clicking the green or red button Capacity obligatory Optimum for standard tanks only Plan point Ship point for standard tanks only Safety stock Hysteresis the hysteresis serves to prevent constant event messages e g due to a fluctuating level see Page 91 Unit In the case of a standard tank it is possible to deactivate the Optimum Plan point Ship point and Safety stock input fields individually and the Safety stock and Plan point fields in the 89 11 Managing master data 90 SupplyCare Enterprise SCE30B case of a recycling tank For this purpose click the button to the right of the specific input field This field then becomes gray just lik
61. tanks 59 60 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 7 Planning delivery and disposal Scheduling workplace 7 1 Status management delivery and disposal When a new delivery disposal is created the system checks whether the delivery disposal is planned too early or too late The forecast data determined by SupplyCare are used to check the information The user can either reschedule the delivery disposal which is too late early or confirm this as an early or late delivery disposal SupplyCare monitors the deliveries and disposals daily If it detects an early or late delivery disposal this delivery disposal can be confirmed If it detects a missing delivery disposal this delivery disposal can be mark as fulfilled The following diagram shows the status management for disposals and deliveries in SupplyCare He New delivery disposal yes Early Reschedule no a Early delivery disposal confirmed Validity check OK no yes Reschedule no a Late delivery disposal confirmed no Early delivery disposal confirmed Daily validity Late delivery check OK disposal confirmed no i poa Delivery disposal ES yes i marked as fulfilled Delivery disposal detected as fulfilled 7 2 Status display and notification of planned deliveries and disposals Notice m Only users with the Scheduler user role receive notificati
62. template click the corresponding row in the table If you want to delete a template click the button in the corresponding row and then click OK in the Confirm deletion window 71 9 Viewing analysis data Analysis workplace SupplyCare Enterprise SCE30B 1Z 9 Viewing analysis data Analysis workplace Notice The Tank menu item is available to people with Scheduler or Operator configured as their user role This menu item allows you to view important indicators for the inflow and outflow of the individual tanks as data and charts You can use these data and charts to analyze past cycle patterns and use them as the basis for future planning You can export all the information to an Excel spreadsheet In addition it is also possible to print out the charts 1 Click the Workplace menu in the Navigation window 2 Click the Analysis menu item A list of the tanks assigned to you is displayed Workplace gt gt Analysis El Tank group All Product All Tank name Location gt Time zone gt Unt DOs ADOS DIS Product gt Ic 01000 US Operations Marth UTC 05 00 50 5 221 1 96 9 Product IE 010 IE 02000 US Operations West UTC 05 00 iis 353 4 6 0 1 Product i 020 IE O3 mix Ha UTC 01 00 0 0 0 0 0 0 Product i O30 IE 03000 Ha UTC 01 00 0 0 0 0 0 0 Product i O30 IE 04000 CA Operations UTC 05 00 gal 10 2163 6556 2 0 0 Product ic 040 1 ot10 Outflow inflow Chart hourly Chart daily Daily outflow 3125 2012 s0 5
63. the button above the text box if you want to change the text in the box The text box appears in the editing mode OD 3 amp Reload default template iy Show preview E Dear 0 1 the value of 2 in the tank silo 3 at 4 has reached 5 Value 6 7 Time Stamp 8 5110411 Notice You can enter a maximum of 500 characters in the text box The difference between the maximum number of characters and the number of characters already used is indicated under the text box 16 Click the iG button above the text box to display the Available variables legend 17 Edit the text box enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables 18 Click the button to close the Available variables legend 19 Click the 4 Show preview button to see a preview of the text of the limit notification Preview Limit 1 EW Dear First name Name the value of Secondary Secondary name in the tank silo Tank name at Location of tank haz reached Secondary limit name alue Value Unit ime Stamp Time stamp Time zone Secondary limit name Limit value Limit unit Supplier Supplier of tank Buyer Buyer of tank 20 Click the button to close the preview window 21 If necessary click the Es Reload default template button to discard the changes and load the default template 22 Glick El to save your entries in the text box
64. the settings with an external e mail client such as Outlook Express For further information see the sce mail log logfile Endress Hauser 171 12 System administration 172 SupplyCare Enterprise SCE30B 12 13 E mail error messages In specific cases e mail error messages are sent to the administration e mail address that has been entered in the Admin e mail field System administration menu E mail connection menu item Outgoing tab Content of error message Description Wrong gateway type The gateway type that has been specified in the menu System administration menu item Gateway configuration tab Gateway details field Type does not correspond to the gateway type specified in the gateway e mail Unique ID in e mail is missing The e mail does not contain a unique gateway ID Mail too large The e mail exceeds the size in kilobytes specified in the menu System administration menu item System properties tab System properties key cm mail max size KB field Value Invalid mail structure The e mail structure cannot be interpreted by SupplyCare 12 14 Faulty measured data In the Workplace Tank menu the status of the tanks and the aggregated tanks is displayed In addition to the statuses OK green Plan point reached yellow Ship point reached orange Safety stock reached red Out of service there is also the status Bad measurements see Pa
65. to a tank Notice Only people whose user role is configured as System administrator or Local system administrator can assign a measuring point to a tank l Ze In the Navigation window click the System administration menu Click the Gateway configuration menu item see Page 146 Select a gateway in the Gateways table The Devices table shows the devices belonging to the gateway Select a device in the Devices table The Measuring points table shows the measuring points belonging to the device In the Measuring points table select the measuring point you wish to assign to a tank The following detail view is displayed in the Application window i Name 2 Device tag _5V Unique 1D 2 Description Unit for application Please select unit Count Last measured value 3276 000 Unit from device Measuring point tag User description The selected measure point has to be assigned to a tank to configure Scaling table and or Linearization table Both are optional 7 8 Unit for scaling Please select unit Unit for application see above Linearization for scaling None Linearization table name None Scaled value Linearized value Index Input Scaled Index Inputlevel Input volume oro gt ofd v Click the button You can now enter the following information on the device Name obligatory Unit for application obligatory Select
66. to configure Scaling table and or Linearization table Both are optional Unit for scaling in Unit for application see above Linearization for scaling Decimal to Inch Scaling Linearization table name Inch to Gallon Linearization Scaled value 240 000 Linearized value 4000 000 1 655 2 0 1 0 0 2 3276 240 2 24 400 3 0 0 3 43 200 4 0 0 4 TA 1200 5 0 0 5 96 2000 6 0 o 6 120 2400 T 0 o T 144 2600 i 0 0 G 168 3200 9 0 0 9 192 3600 10 o 0 10 240 4000 11 0 0 11 0 0 12 0 0 12 0 0 Beas of 64 or64 9 The following data are read in by the device and cannot be changed Unique ID Unit from device Last Measured Value Device Tag Description Measuring Point Tag 10 Click E to save your entries Click to abort the process 11 Select the Assign measuring points to tag tab The tab cannot be selected until you have entered the values for the Name and Engineering unit for application fields in the Measuring point details tab 12 Click the button 156 Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 13 The tab is displayed in the edit mode Measure point details Assign measuring points to tank Ox Tank name dh Tank setup wizard Tank type Cc Standard tank Tank notes Recycling tank Gateway Device Measure point Primary Secondary 1 Secondary 2 Secondary 3 Secondary 4 Secondary 5
67. user role is configured as Scheduler or Operator can set a resubmission date for events m You can only set a resubmission date for the In process option 1 Click the Workplace menu in the Navigation window Click the Event menu item In the overview table select the event that you want to process Click the button 2 3 4 In the lower section of the application window select the Event details tab 5 6 Activate the In process check box 7 The tab is displayed in the edit mode Tank details Ewent history Inventory chart E x Message Safety stock reached detected by measurement Status Acknowledge Comment In process Resubmission date 210032011 E Resubmission time 10 12 Standard disposal time Days 2 Planned disposal Amount Unit Time stamp Time zone Comment 8 Either enter the date directly in the Resubmission date field or use the B button 9 If necessary specify a time in hours and minutes for the Resubmission time fields 10 Click E to save your changes Click 4 to abort the process Notice m fa standard tank is refilled and the inventory is again above the plan point the status of the event automatically changes to Done If a recycling tank is drained and the inventory is once again below the plan point the status of the event automatically changes to Done m The Standard delivery time is displayed for standard tanks and the Standard disposal time for recycling
68. v IC 01000 0 y IC 02000 ao A IC 03 mix Of cooo a 0 amp Mustermann AG Mustermann AG Mustermann AG Mustermann AG US Operations North US Operations West HQ HQ Product IC 010 Product IC 020 Product IC 030 Product IC 030 10 258 51 80 6 222 882 01 111 441 01 9 11 12 2 14 AM UTC 05 00 9 11 12 3 10 AM UTC 05 00 9 20 12 11 59 AM UTC 01 00 9 20 12 11 59 AM UTC 01 00 IC 04000 of LNG Waste as gt Mustermann AG Mustermann AG CA Operations APAC Operations TH Product IC 040 Waste LNG 011 110 964 0 gal 26 646 3 9 20 12 10 36 AM UTC 05 00 9 11 12 2 14 PM UTC 08 00 1 2 012 v E 4 Where available the following primary data are displayed for every tank Tank name Company name Location Product Value with unit Time stamp with time zone Notice The last primary value is displayed For aggregated tanks the sum of all the last measured values for the associated tanks is displayed To update the view and call up new measured data click the button Click the El button to export the content displayed to an Excel file Endress Hauser 51 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B Click the e button to display the legend You can move the legend to another location by pointing the cursor at the blue title bar and pressing and holding the left mouse button Legend Inventory chart Capacity 100 0 Timezone UTC 05 00 Scaling liniilax Peri
69. value X value is assigned the corresponding Y value a volume value for example A linearization table must have a minimum of 2 points and can have a maximum of 64 points A point consists of an index input level X value and input volume Y value 1 In the Navigation window click the System administration menu 2 Click the Linearization menu item Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 3 The following detail view is displayed in the Application window System administration gt gt Linearization El Name Description Linearization table 1 Description BES of 1 Configuration Graph Upload File Upload 0 i i lame Linearization table 1 Index InputlevelS Input volume gt Description Description 1 0 0 gt 1 10 2 2 20 4 3 30 5 4 40 6 5 50 gt 6 60 8 7 70 9 8 80 10 9 90 of 4 In the lower section of the Application window select the Configuration tab 12 10 1 Creating changing and deleting a linearization table Creating a linearization table 1 In the Navigation window click the System administration menu 2 Click the Linearization menu item 3 Click the A button A The tab is displayed in edit mode in the lower section of the Application window Configuration Graph Upload File Upload O x Name Index InputlevelS Input volume Description A O a of 5 Here you can enter data for the
70. zone of time stamp The time zone of the location is used DO daily outflow Displays the daily outflow last calculated ADO average daily outflow Displays the value for Average daily outflow The value is calculated with the average quantity per day The calculated average quantity is based on the configured Forecast based on value This field is empty for recycling tanks DI daily inflow Displays the daily inflow last calculated ADI average daily inflow Displays the value for Average daily inflow The value is calculated with the average quantity per day The calculated average quantity is based on the configured Forecast based on value This field is empty for standard tanks Product Indicates the product in the tank 9 2 KPIs key performance indicators The tab displays important indicators for the inflow and outflow of the selected tank Outtlow Inflow Chart hourky Chart daily Daily outflow W27 2011 1 6 Average daily outflow 3 9 Daily inflow W27 2011 0 3 Day s until reaching safety stock 14d 8h Next planned delivery From date 12 31 2010 Ej Todate 3 27 2011 E fw Show available period Actual period between first and last outflow from 12312010 to 327 2011 Total outflow 446 0 Total inflow 449 7 Number of deliveries 9 Frequency of deliveries 9 66 day s The Daily outflow and Daily inflow fields display the values last calculated
71. 0 FXA320 4414B fxa320 FIS Gateway with fisld 5252 6252 6252 47000901040 FRASZO XEIA fxas520 FIS Gateway with fisld 4901 4501 FIS Gateway with fisld 2277 Z2TT FIS Gateway with fisld 2374 2374 BEE of 11 4 For information on integrating FIS gateways see Page 164 Chapter 12 11 1 Notice Click the button to export the FIS gateways table as an Excel file 12 11 1 Integrating FIS gateways You can integrate a FIS gateway into SupplyCare via the FIS Gateway Wizard 1 In the Navigation window click the System administration menu 2 Click the FIS gateways menu item 3 An overview of all the FIS gateways available is displayed in the Application window System administration gt gt FIS gateways E m Channel Action SupplyCare gateway name FIS gateway name 2 FIS ID Unique ID Order code gp Insert 5705 5705 6C002E01040 FRASZO AATA fxas520 gp Insert 5998 5998 12345578902 ha3d20 AE2AA fxa320 FIS Gateway with fisld 5092 6092 6092 AT0025010A0 FRASZO AATA fxas520 FIS Gateway with fizld 5095 6095 6095 AT0024010A0 FXA320 4414B fxa320 FIS Gateway with fisld 5252 6252 6252 47000901040 FRASZO XEIA fxas520 FIS Gateway with fisld 4901 4501 FIS Gateway with fisld 227T 22T FIS Gateway with fisld 2374 2314 BEE of 11 4 Inthe overview table select the FIS gateway that you want to integrate into SupplyCare 5 Click the Insert button Notice The Insert button is only enabled if the FIS gateway has not yet
72. 2 Click the _ button 3 The Configuration tab is displayed in edit mode A Enter data for the following fields Name unique name of linearization table Designation 5 Click E to save your entries Click E 4 to abort the process 6 Select the Upload tab 7 Click the 4 button 8 The tab is displayed in the edit mode Configuration Graph Fils Upload You can paste a data structure in the text area and select the decimal sign and data separator Then press save button to submit your input Decimal Sign Dot O Comma Data Semicolon separator O Tab O Comma 9 Copy a data structure into the text input area 10 Specify the Decimal sign and the Data separator Configuration Graph Upload File Upload You can paste a data structure in the text area and select the decimal sign and data separator Then press save button to submit your input 0 0 0 0 A Decimal Sign O Dot 1 0 10 0 A Comma 2 0 20 0 3 0 30 0 Data O Semicolon 40 40 0 separator Tab 5 0 50 0 60 60 0 kal O Comma 11 Click EX to save your entries Click to abort the process 12 Ifyou save your entries the message Linearization data was saved successfully appears 13 Select the Configuration tab if you wish to view the uploaded values as a linearization table Select the Graph tab if you wish to view the uploaded values as a graph Endress Hauser SupplyCare Enterprise SCE
73. 3 User interface 4 3 Download history The following options are available via the Download history tab m Save measured value history for all tanks shown in the overview or for one tank selected in the overview in CSV format m Display measured value history for one tank selected in the overview in a diagram The CSV file contains the following data Tank name Time stamp Value Unit Optimum Plan point Ship point Safety stock and Measuring point see Page 44 1 Click the Workplace menu in the Navigation window 2 Click the Tank menu item A list of the tanks assigned to you is displayed 3 In the overview table select the tank whose history you want to view as a chart or save as a CSV file 4 In the lower section of the application window select the Download history tab Inventory chart Tank details Notes and files Tank partners Location details Tank service status Event details H From date 6 22 2012 E To date 6 22 2012 E Format MS Excel CSW e Export selected tank only C Include secondary values C Include scaled values Readings max 500 Number of readings 5 Select a time in the past for which you want to download data You can either enter the date directly in the Start date and End date fields or use the E button When entering the date directly use the dd mm yy format The UTC 00 00 time zone is used for the start and end date 6 Ifyou want to download the measured value history a
74. 30B Endress Hauser 12 System administration 12 10 4 Uploading a linearization table as an Excel file l 2 S 4 Select the Configuration tab Click the button The Configuration tab is displayed in edit mode Enter data for the following fields Name unique name of linearization table Designation Click E to save your entries Click E 4 to abort the process Select the Upload File tab The tab is displayed in the lower section of the application window Configuration Graph Upload File Upload 10 To fill in your data from an Excel file please select the file with the Browse button Then press upload to submit the file Jupload Upload Click the Browse button select the desired Excel file in your directory The Excel file must meet the following criteria and is read as follows ES 1 short tons 2 0 0 10 52 20 10 3 30 15 6 6 40 20 8 50 30 1 Eg 60 40 3 Eg z0 50 4 80 59 8 90 70 1 100 80 2 13 The first line is used as a header These data are not read The Excel file may only consist of two columns The values in the first column are read as X values and the values in the second column are read as Y values There must be a numerical value in each cell Text in a cell results in an error message A pair of values consists of an X value and a Y value An empty cell results in an error message The Excel file may consist of a maximum of 64 value pairs
75. 4 6 SupplyCare Enterprise SCE30B You can enter additional information on the secondary values here such as Name The name is displayed in the Workplace Tank view in the Tank name column and in the Inventory chart tab Limit 1 See the following section Display for Descending limits and Ascending limits Limit 2 See the following section Display for Descending limits and Ascending limits Hysteresis Unit read only Upswing Switch between descending and ascending limits Display for Descending limits and Ascending limits Using the Upswing check box choose between the Descending limits and Ascending limits display Upswing Description Column in the check box Workplace Tank view Descending limits Limit 1 PP plan point Upswing check box disabled Limit 2 SST safety stock Ascending limits Limit 2 PP plan point Upswing check box enabled Limit 1 SST safety stock downswing upswing 11 3 5 Configuring tank freeze events Tank freeze events are generated using an internal limit based on the latest measurement received for the tank within a defined time span e g to recognize material theft leakage or defects i 2 3 4 Click the Configuration menu in the Navigation window Click the Tank menu item In the lower section of the application window select the Tank freeze tab Click the E button Endress Hauser
76. 5 Changing master data Depending on your particular user role you can change data records in the Company User Tank Aggregated tank Location Product and Tank groups master data The data for a tank are changed in the following example Proceed in the same way for other master data 1 Click the Configuration menu in the Navigation window 2 Click the Tank menu item Zl 3 User interface 28 SupplyCare Enterprise SCE30B 3 The following detail view is displayed in the Application window Configuration gt gt Tank Product ALT Buyer ALE Supplier Tank name _ Location gt Capacity gt Product Notes Unit S Ic 02000 US Operations West 100 Product IC 020 Tank soll regelm ig alle 3 Ic 03000 Ha 355000 Product IC 030 Ic 0 CA Operations 320000 Product IC 040 gal IC Waste EU eee UK 400000 Waste IC 011 Material Safety Instruction e 0 Tene to wizara Tank name Ic 01000 a Capacity 20000 Location US Operations North Optimum 15500 Buyer Buyer AG Plan point 12000 Supplier Supplier AG Ship point a SDT 2 Days safety stoct F Product Product IC 010 laser 100 m Use product unit unit Tank type Standard tank Recycling tank ADIADO based on 14 Days E Include negative values Activate forecast 4 Inthe table click the tank for which you want to make changes 5 Select the Tank details tab 6 The related tab is displayed in the
77. 59 0 355 000 0 0 icom 110 964 0 gal CA Operations Product IC 040 209 036 0 320 000 0 2 0410 Inventory chart Tank details Notes and files Tank partners Location details Event details Freeze event details Download history Capacity 100 0 Time zone UTC 05 00 Scaling Min Max Period selection 30 days G 100 a e Se et ae percent 0 Es 1 Sep 3 Sep 5 Sep 7 Sep 9 Sep 11 Sep 13 Sep 15 Sep 17 Sep 19 Sep 21 Sep 23 Sep 25 Sep 27 Sep 29 Sep MM 4 o M 5 Ifyou click on another line the details of the newly selected tank are displayed Click the Hide details button when you want to hide the details again Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 6 You can choose the following tabs in the lower part of the application window Inventory chart Tank details Notes and files Tank partners Location details Tank service status Event details and Download history Notice SupplyCare distinguishes between standard tanks and recycling tanks From a standard tank the product is withdrawn For a recycling tank the tank is filled with the product see Page 90 In the Workplace Tank view the current level available capacity are displayed in graphic form in the Level column For standard tanks the colored bar drifts from left to right with increasing level The percentage specified corresponds to the current level For recycling tanks the colored bar drifts f
78. Click the Upload button Select the Configuration tab if you wish to view the uploaded values as a linearization table Select the Graph tab if you wish to view the uploaded values as a graph 163 12 System administration 164 SupplyCare Enterprise SCE30B 12 11 Integrating and managing FIS gateways FIS gateway menu Notice People whose role is configured as System administrator or Local system administrator can integrate configure and manage FIS gateways If a FIS gateway is assigned to a FIS contract it is listed in the FIS gateways menu item You can use the FIS gateways menu item to view information on the FIS gateways and integrate a FIS gateway into SupplyCare 1 Inthe Navigation window click the System administration menu 2 Click the FIS gateways menu item 3 An overview of all the FIS gateways available is displayed in the Application window This comprises all the FIS gateways that are assigned to a FIS contract You can see which FIS gateways have already been incorporated into SupplyCare from the names in the SupplyCare gateway name column System administration gt gt FIS gateways El Action SupplyCare gateway name FIS gateway name 2 FIS ID Unique ID Order code Channel gp Insert 5705 5705 6C002E01040 FRASZO AATA fxas520 gp Insert 5998 5998 12345578902 ha3d20 AEZAA fxa320 FIS Gateway with fizld 5092 6092 6092 AFO0Z501040 FRASZO AATA fxas520 FIS Gateway with fizld 5095 6095 6095 AT0024010A
79. Default home page filter The default home page selected here is displayed in the application window following successful login Ifa splash screen image is used in the application window the default home page is displayed once the user clicks Next Endress Hauser 179 14 Viewing the gateway report Cockpit SupplyCare Enterprise SCE30B 180 14 Viewing the gateway report Cockpit Notice The Cockpit menu item is available to users whose user role is configured as Local system administrator or System administrator This item displays all the gateways for which you have access authorization L 2 oi In the Navigation window click the Cockpit menu Click the Gateway report menu item The following view is displayed in the Application window Cockpit gt gt Gateway report El a Gateway gt Unique ID Device gt Measure point Tank gt Assignment Location gt Hotes gt APAC Operations OPsAPAC Device 5 APAC Operations OPsAPAC Device 5 CA Operations OPsCA Device 4 CA Operations OPsCA Device 6 1 of 39 2 1 APAC Operations OPsAPAC Device 1 1 LNG 01000 1 APAC Operations SG APAC Operations OPsAPAC Device 6 1 APAC Operations OPsA4P4C Device 6 2 APAC Operations OPsAPAC Device 3 1 APAC Operations OPsA4P4C Device 4 2 APAC Operations OPsAPAC Device 4 1 APAC Operations OPsAPAC Device 2 1 CA Operations OPsc Device 1 1 IC 04000 1 CA Operations CA Operations OPsCA Device 2 1 CA Operations OP3CA D
80. Delivery made detected Disposal made detected If the system has detected a missing delivery disposal or missing measured data you can process this delivery disposal in the Details tab using the Mark as fulfilled button The delivery disposal is displayed as Delivery fulfilled confirmed Disposal fulfilled confirmed x Endress Hauser 61 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 1 Click the Workplace menu in the Navigation window Click the Scheduling menu item In the overview table select a status that you want to process oe In the lower section of the Application window select the Details tab The following tab appears Details History Message Deleted delwery Planned delivery Amount 12000 0 Unit Time stamp 8 1 12 12 00 PM Time zone UTC 05 00 Com ment You can process the following statuses with the Mark as fulfilled button Missed delivery disposal detected Missed delivery disposal no measurement You can process the following statuses with the Confirm button Early delivery disposal detected Late delivery disposal detected 7 2 2 Viewing status history 1 Click the Workplace menu in the Navigation window Click the Scheduling menu item In the overview table select a status that you want to process a A In the lower section of the Application window select the History tab The following
81. Ecograph T Endress Hauser Internet FXA320 Endress Hauser Internet e mail or phone FXA520 Endress Hauser Internet e mail or phone FXA720 Endress Hauser Internet Memograph M Endress Hauser Internet OPC XML DA opcfondation Internet Click E to save your entries Click E 4 to abort the process After saving the gateway is displayed in the Gateways table Configure the gateway as described in Chapter 12 8 2 12 8 2 Configure gateways 1 In the Gateways table select the gateway you wish to configure 2 The following detail view is displayed in the Application window Gateway details Communication Scheduling O i TF Enabled aa Name HTTP Gatew ay User description Type FXASSO Endress Hauser Unique 1D Tag Description Last modified Click the E button Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 4 The tab is displayed in the edit mode Gateway details Communication scheduling BB enabled Name HTTP Gatew ay User description Type FXA320 Endress Hauser Unique ID Tag Description Last modified 5 Make your changes 6 Click El to save your entries Click 4 to abort the process 7 Select the Communication tab 8 Click the button 9 The tab is displayed in the edit mode Gateway details Mirra Scheduling HJ i Enabled Gateway access 10 Select the communication version for th
82. H H Reload default template Show preview Dear 0 1 o Following planned delivery for the tank silo 2 at 3 4 Delivery date and time 5 Amount 6 7 Product 3 Comment 9 Notice You can enter a maximum of 500 characters in the text box The difference between the maximum number of characters and the number of characters already used is indicated under the text box 16 Click the iG button above the text box to display the Available variables legend 17 Edit the text box enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables 18 Click the button to close the Available variables legend 19 Click the os Show preview button to see a preview of the text of the PDL PDE notification Preview Missed delivery EN Dear First name Name Following planned delivery for the tank silo Tank name at Location PDL PDE state message Delivery date and time Delivery Disposal date and time Time zone Amount Amount Unit Product Product Comment Comment Delwery disposal state message Delivery disposal state message Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 20 Click the button to close the preview window 21 If necessary click the Es Reload default template button to discard the changes and load the default template 22 Click El to save your entrie
83. If necessary click the Reload default template button to discard the changes and load the default template Click E to save your entries in the text box Click 4 to abort the process Click E to save your entries in the Freeze event notification tab Click to abort the process 12 6 3 Defining and editing limit notification In the Limit notification tab you can specify the subject line and the limit notification text for limit notifications 1 Inthe Navigation window click the System administration menu 2 Click the Notifications menu item 3 Click the Limit notification tab 140 Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 4 The following view is displayed in the Application Window Event notification Freeze event notification POL PDE notification Subject Default Secondary limit name Secondary Secondary name Tank name Location g Subject Custom c Body Limit Language 5 Click the button The tab is displayed in the edit mode 7 The radio button of the Subject Default subject line is preselected Accept the preselection or click the Subject Custom radio button to define the subject yourself 8 Click the a button to display the Available variables legend Available variables 0 First name Name Secondary J Secondary name Tank name Location of tank Secondary limit name Value T Uni amp Time stamp Time zone Product o
84. Level gt Location gt Free5 Product gt Fic o1000 18 287 61 Days UTC 05 00 20 000 0 Six US Operations North 4 712 4 Product IC 010 Fic 02000 66 0 Days UTC 05 00 100 0 US Operations West 34 0 Product IC 020 E IC 03 mix 6 000 0 1 Days UTC 01 00 40 000 0 hx HQ 34 000 0 Product IC 030 E IC 03000 3 000 0 Days UTC 01 00 20 000 0 15 HQ 17 000 0 Product IC 030 15 IC Waste 3 000 0 Days UTC 01 00 30 000 0 90 E EU Operations UK 27 000 0 Waste IC 011 IC Waste Il 3 000 0 Days UTC 01 00 30 000 0 390 E EU Operations PL 27 000 0 Waste IC 011 IC Waste Ill 3 000 0 Days UTC 01 00 30 000 0 90 C EU Operations ES 27 000 0 Waste IC 011 LNG 01000 1 000 0 Days UTC 08 00 50 000 0 ho APAC Operations SG 49 000 0 Product LNG 010 E LNG Waste 5 061 0 Days UTC 08 00 25 000 0 80 O APAC Operations TH 19 939 0 Waste LNG 011 of 1 Inthe top table line enter a complete designation or just the first few letters in the desired field 2 Press ENTER 3 Only the matching table entries are now displayed In order to display the entire table contents again delete your entries and then press ENTER You can always use the following filter functions for the individual fields Description Example Group Function User entry Result data displayed Character string wildcard Tank0 All entries that start with Tank0 e g Tank01 Tank02 special etc Tank0 All entries that contain Tank0 e g Fra
85. PC server 15 1 Configuring the OPC Bridge Wrapper 1 Click the Softing OPC Easy Connect icon in the taskbar using the right mouse button Endress Hauser 181 15 OPC Connection SupplyCare Enterprise SCE30B 2 Choose Open Softing Easy Connect Configuration Tray 3 Push the Start Configurator Button 7 SS era Configurationl Softing Easy Connect Tray as Version 3 00 0 9839 Service Softing State Stopped art Application Type Show Web Pages di Stop Start Configurator Show Online Help 4 The following Window is displayed gt Configuration1 Softing Easy Connect Stopped 2 Configuration View Local Application Help soft ne Data Source Tunnel Server gt External Tunnel Servers Create and configure connections data sources to external servers Name Type Address Data Source s A Tunnel Server OPC OPC Server EJ Local Items Data Processing Data Destination 0 Settings Data Source Tunnel Server 5 Add a new data source by selecting OPC Server SPC OPC Server _ 6 Select the following icon on the right hand side 182 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 1 8 15 OPC Connection The wizard guides you through the setup Click Next o hes OPC Server Wizard With the OPC Server Wizard you can create and modify a data source connection t
86. RED aggregated tank aggregated object planned delivery disposal Bad measurement data no delivery disposal planned Bad measurement data planned delivery disposal Bad measurement data aggregated tank aggregated object no delivery disposal planned Bad measurement data aggregated tank aggregated object planned delivery disposal Out of order no delivery disposal planned Out of order planned delivery disposal Out of order aggregated tank aggregated object no delivery disposal planned Out of order aggregated tank aggregated object planned delivery disposal S Re RE SS 8 gs 4 ee Diverse several tanks objects with different statuses displayed are available at the location The tanks objects can have different scheduling statuses delivery disposal planned or not planned Icons for scheduling Button Meaning Tank Object E Planned delivery Planned disposal a planned delivery or disposal is indicated in E es the inventory chart and the calendar by a delivery van icon Standard tank Standard object how a standard tank standard object is indicated in the Scheduling menu item Aggregated standard tanks Aggregated standard objects how aggregated standard tanks ageregated standard objects are indicated in the Scheduling menu item 47 am Recycling tank Recycling object how a recycling tank recycling object is tw ta x 5
87. SW ewe Ww e E Level Pressure Flow Temperature Liquid Registration Systems Services Solutions Analysis Components Operating Instructions SupplyCare Enterprise SCE30B Operating program for the coordination of material and information flow along the supply chain Endress Hauser L3 Welcome Claude Fischer Version 02 08 01 About Log off a fan Show secondary data Unit Time zone Location v oie Sie Tank group Al Product All Supplier AN Location al Event State Tankname Location lt Product lt Level lt Value Unit Timestamp lt Time zone lt Scheduling Anas O PY woe US Operations West 3 oson IRAZANZAM UICN Map DO ES 1c 03 mix HQ hy 6 000 01 3 27 12 12 00 PM UTC 01 00 O ico HQ Product IC 030 15 3 000 01 3 272 12 00 PM UTC 01 00 User D icwaste EU Operations UK Waste IC 011 30 C 3 000 01 3 27 12 12 00 PM UTC 01 00 Tank J IC Waste Il EU Operations PL Waste IC 011 30 5 3 000 0 1 3 27 12 12 00 PM UTC 01 00 ao ER Aeee Tank details Notes and fies Tank partners Location details Tank service status Event details Download history Unit a Capacity 100 0 Time zone UTC 05 00 Period selection 14 days gt Gateway configuration Linearization New gateways Alarm Report System properties Notifications E mail connection Messaging Profile percent User profile User preferences Cockpit Gateway report 18 Mar 20 M
88. Search button Upload the graphic via the Upload button 9 Configure the login image as follows Select login image Select a graphic in your directory using the Search button Upload the graphic via the Upload button 10 Click E to save your entries Click 4 to abort the process 12 5 Modules Notice Modules can only be configured via the licensce key KEY SupplyCare is modular in design The Modules tab provides an overview of your available mod ules Notice Mela Depending on the modules activated the menu items and contents of Overview and of Detailed view can differ as can the contents of the dialog windows 1 In the Navigation window click the System administration menu 2 Click the System properties menu item 3 Select the Modules tab 4 The following appears in the Application window System properties Basic jobs Database backup Ul Customizing Activate Advanced e Professional O Activated modules are displayed with a green button deactivated modules with a red 12 6 Defining notification Notice Wila Only people whose role is configured as System administrator or Local system administrator can define and edit notifications 12 6 1 Defining and editing event notification In the Event notification tab you can specify the subject line and the event notification text for event notifications 1 In the Navigation Window click the System administration menu 2 Click the Notifi
89. See Page 27 Chapter 3 6 5 11 6 4 Deleting a product See Page 30 Chapter 3 6 8 Notice You can only delete a product if the product is not assigned to a tank The m symbol is only displayed for a product which can be deleted 11 6 5 Copying a product See Page 31 Chapter 3 6 9 11 7 Managing tank groups Notice Wena Only people whose user role is configured as Master Data can create change and delete tank groups m Depending on your configuration Object groups are displayed instead of Tank groups For more information refer to the appropriate chapter in the Service Manual for System administration Tank groups are used to organize tanks and to assign authorized users to the tanks In the Tank assignment tab you create tank groups and assign tanks to the groups You can assign one or more users to the tank group using the User assignment tab In the User assignment tab you also specify the tank events for which the user should receive notification 11 7 1 Changing tank groups 1 Click the Configuration menu in the Navigation window 2 Click the Tank group menu item 110 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data 3 The following detail view is displayed in the Application window Configuration gt gt Tank group El Name Description 2 All Tanks APAC Operations EU Operations US Operations BES jof4 Tank assignment User assignment
90. Toolbox Demo Server Copyright C Softing Industrial Automation GmbH 1998 2012 All Rights Reserved Product version 4 31 2797 Supported languages System Default User Default Neutral en us de de sv se en gb Group count 0 Bandwidth 1 Status information Authentication info not authenticated 12 A forward client is not needed so just click on Next 13 A filter is not needed Only the configured items of the Modbus OPC Server are available Click Finish Filter On this wizard page you can activate or deactivate the filter functionality for the actual data source Filter Definition Activate or deactivate the filter functionality for the actual data source All items will be dynamically retrieved from the external server and will be completely available in the namespace of the local application 9 Deactivate Filter Only filtered items from the external server will be available in the namespace of the local application You can specify the corresponding filter items on the next wizard page Activate Filter Data Items Of Type Property Specify if the configurator shall also display data items of type Property in the namespace of the local application This setting does not have any effects on the local application during run time itis only used to optimize the display and the handling of the namespace tree here in the configurator Display data items of type Property Endress H
91. UTC 00 00 is the default value The time zone configured for the location is used for the Inventory chart and Tank details tabs UTC 00 00 is the default value The Event menu item provides effective support in a replenishment process which is controlled by means of order limits For standard tanks the events are triggered if limit values in the individual tanks are undershot for recycling tanks they are triggered if the limit values in the individual tanks are exceeded A Freeze Event is triggered if the actual measurement exceeds the configured freeze event delta In addition to screen display people can also be notified of the events by e mail 1 Click the Workplace menu in the Navigation window 2 Click the Event menu item 3 The following is displayed in the portal window with an overview of all the events sorted in order of priority Workplace gt gt Event Unit Time zone Location View All Status All except for done Severity All Severity Status Tank Location Supplier Time stamp Tank_01 Monthly ramp Grenzach Whylen 11 9 13 1 50 AM O Tank_01 Monthly ramp Grenzach Whylen 11 5 13 4 16 PM T Eu Ic 01000 US Operations North UTC 05 00 110t x Freeze event details Mark as done Message Freeze event detected by measurement Value 90 050 0 Time stamp 11 9 13 1 50 AM Unit kg Time zone UTC 01 00 Lirmit Value 82 3550 Unit kg Time stamp 11 9 13 12 55 AM Time zo
92. a HTTP Gateway 123456789 Device 1 0 RAS Gateway 907654321 Device 2 3 E mail Gateway 543219876 ADS IGE MHH ADS oto Z ABS of o 5 Inthe Gateways table select the gateway you wish to replace 6 The Gateway details tab opens in the application window Gateway details Communication scheduling i P Enabled aa Name HTTP Gatew ay User description Type FXA320 Endress Hauser Unique 1D Tag Description Last modified Notice You must take the mode of communication into consideration to be able to replace an already configured gateway with a new gateway Communication by Internet HTTP or Telephone When replacing gateways where the mode of communication is Internet HTTP or Telephone you must configure the appropriate settings for the new gateway on the Communication tab Communication by E mail When replacing gateways where the mode of communication is E mail you must enter the serial number unique ID of the new gateway in the Serial number field on the Communication tab 7 Click the ae Replace gateway button Using the HTTP communication a connection to the new gateway is established and the Unique ID in the system is replaced by the new one The new gateway is now implemented in SupplyCare Enterprise and assumes the existing tasks of the gateway it replaced Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 12 9 Assigning a measuring point
93. activation of the menu item Map You can get the client ID for a fee from the Google Enterprise Support see Page 128 The activation of the menu item Map can be executed by yourself see Page 128 8 Click El to save your changes Click 4 to abort the process 9 Select the Tanks at location tab 10 Click the 34 button 11 The tab is displayed in the edit mode Location details Tanks at location Location notes B x Assign gt Tank name gt Notes gt LNG 01000 BEES of 12 Activating the check box in the Assign column assigns the tank to the location The table shows the tanks which are already assigned to the location or which are not yet assigned to a location 13 Click El to save your changes Click E 4 to abort the process 11 5 2 Adding opening and deleting files and other information for a location Using the Location notes tab you can add additional information for a location and a maximum of five files The information entered here and the attached files are also displayed in the Workplace Tank view Notes and files tab For information on adding opening saving or deleting a file see Page 97 11 5 3 Changing location tank assignment 1 Click the Configuration menu in the Navigation window 2 Click the Location menu item Endress Hauser 105 11 Managing master data SupplyCare Enterprise SCE30B 3 In the overview table click the location whose assignment you want to c
94. al system administrator are only visible for users with the user role System administrator 1 Click the Configuration menu in the Navigation window 2 Click the User menu item 3 Select the User roles tab 4 Click the i button 5 The tab is displayed in the edit mode User details User roles Tank groups CES System administrator Local system administrator Alarm notification via W E mail Master data Scheduler Operator Read only 6 Activate the appropriate check box to assign the user a user role You can assign multiple user roles to a user at the same time 7 Once the system administrator technical system administrator or local system administrator user role has been activated the Alarm by Mail check box is also displayed If this check box is activated an e mail is sent to the system administrator or the technical system administrator if an alarm occurs see Page 145 8 Click El to save your entries Click 4 to abort the process 11 2 3 Changing a user gt See Page 27 Chapter 3 6 5 11 2 4 Deleting a user gt See Page 30 Chapter 3 6 8 Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data Notice A user can only be deleted if he or she is not assigned to any tank group or any company as a contact person The user must not be logged in The tank group assignment can be canceled in the Tank groups tab The company assignment can be canceled in the Company menu ite
95. al value graph dialog box appears for the values measured in the past The Forecast value dialog box appears for the calculated values in the future The Current value dialog box appears for the last measured value received Historical value Value Time stamp 91142 1 10 AM Navigating via the dialog The Value field in the dialog box displays the measured value for the past and the calculated value box for the future The Time stamp field displays the associated date and time Click the 44 button to view the older measuring points Click the FF button to view the more recent measuring points If you want to view points that are further back in time change the number of displayed days in the Period selection field A8 Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 4 6 Zoom functions in the inventory chart You can use the zoom function to enlarge a maximum section of 12 hours in the inventory chart to get a closer look at the data 1 Set the start of the zoom in zone Proceed as follows Using the left mouse button click the desired starting point While holding the left mouse button drag the mouse to the left or right The selected zone is marked with a dark background You can move the zone to the left or right by dragging the mouse 2 Click the left mouse button to select the end of the zoom in zone 3 The inventory chart with the selected zone is loaded 4 Click Reset zoom to zo
96. alarm delete open true cheduler alarm retention time 100 cheduler measurement retention time 50 workplace secondary default hide BES IGEM Key analysis charthourk period Value 2 5 Inthe overview table select the parameter key that you wish to change 6 In the lower area click the button 7 The tab is displayed in the edit mode 8 Carry out your changes for the Value field 9 Click to save your entries Click 4 to abort the process Notice Click the button to export the System properties table as an Excel file Click the fe button to export the System properties table as a PDF file Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 12 1 2 Parameters keys and input range table This section describes all the keys displayed in the System properties tab Key Description adiadobasedon default This value corresponds to the ADI ADO based on field Configuration gt Tank gt Tank details Configuration gt Aggregated tank gt Tank details System administration gt Gateway configuration gt Tank details In the case of standard tanks the value entered here is used to calculate the Average daily outflow value In the case of recycling tanks the value entered here is used to calculate the Average daily inflow value These average values are used to calculate the forecast values in the Inventory chart tab in the Tank and Event m
97. an point Ship point and Safety stock input fields individually and the Safety stock and Plan point fields in the case of a recycling tank For this purpose click the button to the right of the specific input field This field then becomes gray just like the button It is no longer possible to enter information These input fields can be activated by clicking the gray button in question 9 Select the Tank list tab 10 Click the 7 button 11 The tab is displayed in edit mode in the lower part of the Application window Tank details Tank freeze Tank groups Tank notes O x Assign gt Tank name Notes gt Location gt Ic 03002 Ha Ic 03003 Ha F LNG 01000 APAC Operations SG E Ic 01000 US Operations North E Ic 03000 HQ of 12 Activating the appropriate check box in the Assign column assigns the tanks to the aggregated tank Notice Meyi Only the same type of tanks i e standard tanks or recycling tanks are displayed in the tank list In the Measuring point details tab these tanks must be assigned a measuring point and the same Engineering unit for application as has been assigned to the aggregated tank Only these tanks can be added to the aggregated tank 13 Click El to save your entries Click to abort the process 14 Select the Tank groups tab 15 Click the button Endress Hauser 101 11 Managing master data 102 SupplyCare Enterprise SCE30B 16 The tab is displayed in the edit mode
98. and configure the delivery channel Channel URL Po Juser Po Password Po Enter the following data here URL obligatory website of the selected channel User name Password Use proxy Notice You can also use the FTP channel for transmission via secure FTP FIPS 121 11 Managing master data SupplyCare Enterprise SCE30B 16 Click the Finish button to finish the report Click the Next button to go to scheduling The Scheduling dialog box is displayed Step 6 out of 6 Scheduling Define the scheduling rules Enable scheduling Overview of affected dates UTC 00 00 Coordinated Uni ha November 2011 Please select a repetition rule 17 Here you can enter data on the scheduling such as Enable scheduling the scheduling rule is enabled immediately as soon as the report has been completed Time zone Repetition rule you can select a rule here Daily possible to schedule by time or frequency Weekly on every possible to select the specific days and schedule by time or frequency Monthly on specified date possible to schedule the start date and time for creating the report every month Monthly on last day of month performed on the last day of the month Possible to schedule the time for creating the report every month The days on which a scheduling rule is executed are highlighted in color in the calendar You can scroll through the calendar on a month by month basis
99. ar 22 Mar 24 Mar 26 Mar 28 Mar 30 Mar BA00055S 00 EN 16 14 Software Version 2 08 a Endress Hauser People for Process Automation SupplyCare Enterprise SCE30B Table of contents REVISION history sir a 7 Registered trademarks 7 1 Safety instructions 8 La Desti nated Use sosa da Ga 8 2 PESCU Senha toca tail ee leas ee lacdd R Grats acer 8 1 3 Installation commissioning and operation 8 14 Technical improve Medion raras ees 8 1 5 Conventions used in this manual cis oie ees 8 OL ENMPRASIARNS Sas 9 2 System description 10 3 User interface 2d 13 Sel Starting the Prostate 13 SI Pines TUCE A ost a a a 14 SAN POCA WNION Ss 14 Ja A E 15 3 2 3 Navigation windoW eiii 15 3 2 4 Application window 17 Sy EMS An 18 S ACUSA AAA 18 94 Standard OU HONS ad 18 3 4 2 Buttons in tables adora 19 3 4 3 Symbols for events ro 19 3 4 4 Icons for tanks objects suicidas 20 3 4 5 Icons for tanks objects Map workplace 21 JAO Icons TOR SCHEO UNS eches rca Ze 3 4 7 Icons for disposal and delivery status 23 374 6 ICONS JOP analys deidad 23 3 DEeCHDUONS latido 24 3 6 General processing functions 23 3 6 1 Using filter functions in tables searching 25 3 6 2 Filtering the data records displayed PERSE ai 26 3 6 3 Changing the column display fields in the overview tablas 26 3 6 4 Viewing numerical values master data
100. asured inventory level of the aggregated tank aggregated object in question is below the safety stock citical limit Aggregated recycling tanks Ageregated recycling objects the current last measured inventory level of the aggregated tank aggregated object in question is above the safety stock citical limit Endress Hauser 3 User interface SupplyCare Enterprise SCE30B Endress Hauser Button Tank Object Meaning El Bad measured data communication error No measured data are available for the tank object in question The state is also shown for displayed secondary data if the tank object is not out of order Bad measured data communication error No measured data are available for the ageregated tank aggregated object in question Out of service the tank object is not available e g due to overhaul The time when the tank object is out of order is marked in gray in the inventory chart Out of service the aggregated tank aggregated object is not available e g due to overhaul The time when an associated tank object is out of order is marked in gray in the inventory chart 3 4 5 Icons for tanks objects Map workplace Button Meaning Tank Object OK GREEN no delivery disposal planned OK GREEN planned delivery disposal OK GREEN aggregated tank aggregated object no delivery disposal planned OK GREEN aggregated tank aggre
101. ata Creating a tank using the tabs in the Configuration menu Tank menu item Click the Configuration menu in the Navigation window Click the Tank menu item The detail view is displayed in the Application window In the lower section select the Tank details tab Click the button The tab is displayed in the edit mode Secondaries Tank freeze Tank groups Tank notes E x z t arkaj t Tank name Capacity Location Optimum o Buyer Plan point 0 SDT Days N Safety stock 0 dd Hysteresis 0 p Use product unit 4 Unit No tank Tank type fe Standard tank 7 picture selected Recycling tank ADVADO based on 14 Days Include negative values Activate forecast Here you can enter data on the tank such as Tank name obligatory Location select the location from the picklist Buyer select a buyer company from the picklist Supplier select a supplier company from the picklist SDT Standard delivery disposal time Product select a product from the picklist Use product unit if this option is activated the unit of the selected product is automatically used in the Unit field The values in the fields Capacity Optimum Plan point Ship point Safety stock and Hysteresis are converted based on the density entered for the product Tank type By activating the Standard tank checkbox you specify that the tank is a standard type of
102. ating a user 1 Click the Configuration menu in the Navigation window 2 Click the User menu item Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data 3 The following detailed view appears in the Application window Configuration gt gt User El SN Company All Login name gt Name gt First name gt Company Warion MMusterfrau MMusterfrau Marion Mustermann AG aceAdmin Huber Peter Mustermann AG aceEwent Schneider blax Mustermann AG sceLocal Weber Tom Mustermann AG eceReadOnhy Maier Hans Mustermann AG s of to User details User roles Tank groups De g Title Language Company Mustermann 46 Salutation E mail Tom Weber company com Street Hauptstrasse 144 First name Tom Phone City Basel Name Weber Fax Zip code 4416 Mobile State desa Country CH Login name sceLocal Password z Confirm password sesesese 4 In the lower section of the application window select the User details tab 5 Click the _ button 6 The tab is displayed in the edit mode User details User roles Tank groups H x Title Language Company Mustermann AG Salutation E mail Street Hauptstrasse 144 First name Phone City Basel Name Fax Zip code 4416 Mobile State Login eae allowed O Country CH 7 Here you can enter data on the user such as Title Salutation First name obligatory Surname obligatory
103. auser 185 15 OPC Connection SupplyCare Enterprise SCE30B 14 The settings for the OPC XML DA connection are displayed at Data Destination OPC Client These settings will be needed for the configuration in SupplyCare later Configuration1 Softing Easy Connect Stopped c xX a Configuration View Local Application Help Data Destination OPC Client IPC Y Activate OPC Activate or deactivate the data destination OPC Data Access and Alarms and Events for the local server application OPC Data Access Remote OPC Data Access dients can connect to the local application by using an address of the following format opcda lt ProgramID gt lt ClassID gt ClassID A76FGSFF A34F 43DD 9595 C33518490F37 Data Source Program ID Softing OPC EC Configuration1 DA Data Processing 3 z OPC Alarms and Events Data Destination Remote OPC Alarms and Events dients can connect to the local application by using an address of the following format opcae lt ProgramID gt lt ClassID gt PC OPC UA Client UA Class ID 6F5586DA DF04 4DB0 AC 13 8720749F9846 Program ID Softing OPC EC Configuration1 AE A Tunnel Client 4 Activate OPC XML DA the local application by using an address of the following format http lt IPAddress gt lt PortNumber gt lt AddressSuffix gt 7 OPC XML Data Access Database Address suffix OPC DA TCP IP port number 8091 Settings Activate or d
104. been integrated into SupplyCare Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 6 The Gateway details dialog box appears Step 1 out of 2 Gateway details Name FIS Gateway with fisid 5705 Userdescriptior _ a Model fxa520 Unique 1D 6C002E010A0 Tag FXAS20 digital 7 Enter the following data Name obligatory unique name User description description 8 Click the Next button 9 The Scheduling dialog box is displayed Step 2 out of 2 Scheduling Time zone UTC 00 00 Coordinated Uni I Overview of affected dates Repetition rule Please select a repetition rule November 2011 gt Back Cancel Finish 10 Here you can enter data on the scanning schedule such as Enable scheduling the scheduling rule is enabled immediately as soon as the scanning schedule has been completed Time zone Repetition rule you can select a rule here Daily possible to schedule by time or frequency Weekly on every possible to select the specific days and schedule by time or frequency Schedule by select time or frequency For the Time option you can specify up to 12 times when scanning should take place For the Frequency option specify a time interval and a time frame when scanning should take place Endress Hauser 165 12 System administration SupplyCare Enterprise SCE30B The days on which a scheduling rule is executed a
105. bled and hidden Copying the Tank freeze configuration to other tanks 1 Click the Copy to other tanks button in the Tank freeze tab 2 The dialog window Step 1 out of 2 Copy Tank freeze configuration to other tanks is displayed Step 1 out of 2 Copy Tank freeze cont Configuration to copy Activate o Delta calculation absolute 5 percentaged Freeze event delta 42 Unit kg Time zone UTC 00 00 Coordinated Uni Repetition rule Daily From time 17 Q To time 23 55 3 The window displays the last saved Tank freeze configuration Change the configuration if desired 96 Endress Hauser SupplyCare Enterprise SCE30B 4 on 11 Managing master data Click Next to proceede to the next step click Cancel to cancel the process When you click Next the dialog window Step 2 out of 2 Copy Tank freeze configuration to other tanks is displayed Step 2 out of 2 Copy Tank freeze conf Copy to following tanks Tank group All Location All Product All Supplier All 7 2 Tank name Notes Location Tank_02 Monthly ramp Maulburg 2 2 M8 Back Cancel Finish Select the tanks to which you want to copy the Tank freeze configuration by activating the check boxes before the tanks You can filter the displayed tanks by Tank group Location Product or Supplier Click Back to return to the previous step click Cancel to cancel the process or Finish to copy the Tank freeze c
106. by e mail Gateway details Communication scheduling BE M Enabieg Gateway access E mail FXAS20 FXA520 Serial number 5 N Number of e mails per Interval h Tolerance before warning interval h 12 300 For the communication variant E mail the measured values reach the SupplyCare system via incoming e mails The number of these incoming e mails can be monitored and must lie within a certain range The count includes only the e mails with a subject line that has a valid three digit code Refer also the parameter cm dailyScanAmount digitCodes Page 125 Here you specify the following data Serial number obligatory Serial number of the gateway Number of e mails per interval h E mails expected for the specified interval Interval field If the field remains empty or you enter the value 0 the number of incoming e mails is not monitored Refer also the parameter cm dailyScanAmount Page 125 Tolerance before warning The tolerance defines the tolerance range for the number of incoming e mails If the number of incoming e mails is outside this range an alarm message is generated Refer also the parameter cm dailyScanAmount tolerance Page 125 Interval h Interval in which the number of incoming e mails must lie within the specified tolerance If you enter the characters for the field the number of incoming e mails is not monitored Refer also the parameter cm dailyScanAmo
107. cations menu item Endress Hauser 135 12 System administration SupplyCare Enterprise SCE30B 3 The following view is displayed in the Application window Freeze event notification Limit notification POL PDE notification Subject Default Limit name 6 Subject Alternative 1 Limit name Tank name amp Subject Alternative 2 Limit name Tank name Location amp Subject Alternative 3 Limit name Tank name Location Product D l Subject Alternative 4 Limit name Tank name Location Product Time stamp Time zone amp Subject Custom E Body Event Language 4 Click the button 5 The tab is displayed in the edit mode 6 Click the relevant button for the desired subject line or select the Subject Custom radio button to define the subject yourself 7 Click the button a to display the Available variables legend Legend Available variables First name Name Tank name Location Value Unit Time stamp Time zone Product Limit value and unit Limit name Supplier Buyer Salutation Title Free 8 Inthe Subject Custom field enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables e g Event notification Freeze event notification Limit notification PDL PDE notification Subject Subject Default Limit name C l Subject Alternative 1 Limit name Tank name C Subject Alternative 2 L
108. critical low while reaching the safety stock level is regarded as very critical high Once an event has been generated the user can change the status to Acknowledged or In process To making it easier to track events later the change is stored with a time stamp and user name If a critical limit is reached determined by another measurement the status of the event is set to Open If an inventory that is above the plan point is detected for standard tanks and if an inventory that is below the plan point is detected for recycling tanks the event assumes the status Done and no other activities are required A point must be noted with the In process status If the tank is not refilled by the set resubmission date the event status returns to Open The following diagram shows the status for an event in SupplyCare Enterprise Status diagram for an event cl oc In process Acknowledge Status change set by the user Status change triggered by the time H Status change triggered by measurement Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 5 Viewing personalized tank view My tank view workplace 6 2 Viewing event messages Notice m The Event menu item is available to people with Read only Scheduler or Operator configured as their user role The time zone configured in the User preferences menu item is used for the Event details Freeze event details and Event history tabs see Page 177
109. ctuating level The field can also be displayed for existing secondary values The number of places after the decimal point is defined in the Configuration menu Unit menu item Out of service The field is activated if the tank is currently Out of service From date Indicates the date as of which a tank was is or will be Out of service To date Indicates the date until which a tank was is or will be Out of service Supplier Indicates the responsible supplier The supplier is created as a company Buyer Indicates the buyer The buyer is created as a company Buyer ID Is equivalent to the ID field in the Company details tab in the Company menu item SDT standard delivery time standard disposal time Standard tanks The standard delivery time for the tank is specified in the Configuration menu in menu item Tank field Standard delivery time Recycling tank The standard disposal time for the tank is specified in the Configuration menu in menu item Tank field Standard disposal time Time unit Time unit used for the SDT field standard delivery disposal time Time stamp Time stamp for the last measured value The field can also be displayed for existing secondary values The time stamp of the time zone for the last valid measured value is used Also see Time zone field m In the case of aggregated tanks the time stamp from the associated tank which supplied the
110. d configuring the Startup Delayer a N 187 15 3 Starting the OPC Configurator Tool 190 16 Extending the license and searching for updates cis 194 Owl EXtendmothelicensess 634 456 Sou Ges dos 194 10 Searching TOT updates aiseria tos Bete vets soa 194 17 User roles and authorization 196 5 Table of contents SupplyCare Enterprise SCE30B Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser Revision history Version Operating Instructions Changes Revision history Remarks 2 08 XX BA00055S 00 EN 16 14 Implementation of Freeze Events filters in Workplace Event OPC Bridge configuration update Google Maps information update 2 06 XX BA00055S 00 EN 15 13 User roles modified Implemented tank setup wizard optional deactivation of tank limits choice between templates Tank and Object modules processing of negative values deactivation of forecast scaling in the inventory chart hiding of tabs without information additional parameters 2 05 XX BA000555 04 en 14 12 Secondary values increased from three to eight Button renamed to Start check Implemented Additional tank shapes display of thousand separators in the Workplace menu colors showing the tank status forecast value in the calendar Totaling menu item info window containing long text check box Assign new time zone format button Test event e mail in the Tank group menu item fi
111. d e g due to a device change 11152 Folder Scanner failed Gateway Id is Error while executing the FolderScanner service The missing gateway unique ID was not transmitted with the measured value 11153 Folder Scanner failed Gateway tag is Error while executing the FolderScanner service The missing gateway day was not transmitted with the measured value 11154 Folder Scanner failed Invalid Source or Error while executing the FolderScanner service The XML transmitted XML measured data are invalid or not correct 11156 Folder Scanner failed Invalid date format Error while executing the FolderScanner service An invalid date format was transmitted with the measured value 11157 Folder Scanner failed Device Id is missing Error while executing the FolderScanner service Gateway ID is missing the gateway unique ID was not transmitted with the measured value 11201 ScanEmails failed lt ErrorMessage gt Unexpected error while executing the ScanEMails For further information see service lt ErrorMessage gt information 11202 E Mail Server not available E mail server is not available In the E mail connection incoming menu check if the e mail server is set up correctly Check the settings with an external e mail client such as Outlook Express or Thunderbird 11301 ScanGateway failed lt ErrorMessage gt Unexpected error while executing the ScanGateway For further information see service lt ErrorMessage gt i
112. d tank gt Tank details System administration Gateway configuration gt Tank details In the case of standard tanks the value entered here is used to calculate the Average daily outflow value In the case of recycling tanks the value entered here is used to calculate the Average daily inflow value These average values are used to calculate the forecast values in the Inventory chart tab in the Tank and Event menu items and the value in the DSST days until the safety stock is reached column in the overview table in the Tank menu point Selection 2 days 7 days 14 days 30 days or 90 days Factory setting m 14 google api clientid This parameter shall only be used if a customer wants to use their self pur chased client ID from the Google Enterprise Support A prerequisite to get a client ID is an application with the Google Maps API Premier All client IDs start with the prefix gme which does not have to be entered in SupplyCare because it is already consigned If left empty then the Customer can apply for the use of the Endress Hauser OEM client ID within the terms described in Page 78 Factory setting empty google geocode proxy address Proxy URL for accessing the Geocoding Web Service google geocode proxy port Proxy port for accessing the Geocoding Web Service google map activated Activate Map menu item Selection m true or false Factory setting m true gui
113. dates 4 A connection to the Endress Hauser server is established and a web browser window opens Therein a message appears stating if there are any updates available Endress Hauser 195 17 User roles and authorization SupplyCare Enterprise SCE30B 17 User roles and authorization Notice Meyi Several user roles can be assigned to one person at the same time Master data Person with Master data configured as their user role are authorized to perform the following m Create change and delete a user m Assign a user role to users m Assign a tank group to a user m Assign notifications to a user m Change their own user profile m Create change and delete a tank m Assign a tank to a tank group m Create change and delete an aggregated tank m Assign an aggregated tank to a tank group m Create change and delete a location m Assign a tank to a location m Create change and delete a company m Create change and delete a product m Create change and delete a tank group m Assign a product to a tank m Create change and delete reports m Change the number of decimal places for a unit type System Administrator The system administrator is authorized to perform the following m Create change and delete a user m Assign a user role to users m Assign a user to a tank group m Process alarm messages Change system properties m Create and change a tank m Assign a tank to a tank group m Create new gateways Configur
114. duling menu item Click on the Planning tab In the table click the tank for which you want to delete a delivery or disposal Click the Plan delivery Plan disposal tab In the calendar click the entry that you want to delete So A poo The Delivery details dialog box appears for standard tanks The Disposal details dialog box appears for recycling tanks Disposal details Disposal date and time 10433 6 30 03 2011 12 8 Click the button to delete the delivery or disposal 9 The prompt Do you really want to delete is displayed 10 Click OK to delete the entry Click Cancel to abort the process 7 4 Copying a delivery or disposal 1 Click the Workplace menu in the Navigation window Click the Scheduling menu item Click on the Planning tab In the overview table click the tank for which you want to copy a delivery or disposal Click the Plan delivery Plan disposal tab In the calendar click the entry that you want to copy So mW R wD The Delivery status dialog box appears for standard tanks The Disposal status dialog box appears for recycling tanks Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 5 Viewing personalized tank view My tank view workplace Disposal details i i l Amount l Disposal date and time 10433 86 30032011 12 Comment Click Ei to copy the entry The Copy delivery dialog box appears for standard tanks The Copy disposal dialog box appears
115. e Gateway access field 11 Additional fields are displayed on the tab depending on the communication version selected a Communication via Internet Intranet HTTP Gateway details Communication Scheduling E x Enabled Gateway access HTTP FXA320 FXA520 J URL User Password ls using a proxy Fi l Proxy host l Proxy port Proxy user Proxy password Retry interval ms 30000 Number of retries Timeout sec 30 Here you specify the following data URL obligatory IP address of the selected gateway along with additional text index xml e g http 123 456 789 0 index xml If you are using an FXA720 the IP address of the selected gateway must be entered along with the suffix bin index page 201 1 e g http 123 456 789 0 bin index page 2011 User obligatory Password Is using a proxy Proxy host Proxy port Endress Hauser 149 12 System administration 150 SupplyCare Enterprise SCE30B Proxy user Proxy password Retry interval ms Interval between retries if the attempt to establish a connection has failed Number of retries number of retries if the attempt to establish a connection has failed Timeout sec Click EJ to save your entries Click 4 to abort the process With communication via Internet HTTP retrieval is carried out actively by SupplyCare and managed by the Scanning schedule see Page 152 b Communication
116. e Le Reload default template button to discard the changes and load the default template 21 Click to save your entries in the text box Click HE to abort the process 22 Click E to save your entries in the Event notification tab Click to abort the process 12 6 2 Defining and editing freeze event notification Freeze event notification Notice Only people whose role is configured as System administrator or Local system administrator can define and edit contract specific freeze event notifications In the Freeze event notification tab you can specify the subject line and the event notification text for the contract for which you are logged in 1 Inthe Navigation Window click the System administration menu 2 Click the Notifications menu item 3 Click the Freeze event notification tab 4 The following view is displayed in the Application window Event notification Freeze event notification Limit notification POL PDE notification Subject Subject Default Subject Custom a Freeze event Tank name Location Body Limit Language 5 Click the button 6 The tab is displayed in the edit mode 7 Click the relevant button for the desired subject line or select the Subject Custom radio button to define the subject yourself 8 Click the button Ga to display the Available variables legend Available variables First name Name Tank name Location Value Unit Time stamp Time zone Pr
117. e SCE30B 8 Totaling and managing templates Totaling workplace Notice The Totaling menu item is available to people with Read only Scheduler or Operator config ured as their user role 8 1 Totaling In the Totaling menu item it is possible to add up the values of the Value Capacity Free and PD amount fields The totalized Level is represented graphically The values of standard tanks can be totaled in the Standard tanks tab and the values of recycling tanks in the Recycling tanks tab Tanks and aggregated tanks can be included in a calculation 1 Click the Workplace menu in the Navigation window 2 Click the Totaling menu item 3 The following view is displayed in the Application window andard tanks Recycling tanks prkplace gt gt Totaling dEl Refresh view lt Open Unit Time zone User preferences nk group All Product All Supplier All Location All Select 2 State Location lt Tank name Level lt Value lt Unit lt Free lt Product lt Time zone Dp HQ IC 03 mix bo 6 000 01 34 000 0 Product IC 030 UTC 01 00 0 mo IC 03000 15 3 000 0 17 000 0 Product IC 030 UTC 01 00 APAC Operations J SG LHG 01000 ka 1 000 0 I 49 000 0 Product LHG 010 UTC 01 00 of 5 oh o Calculate Level 0 Value Capacity Free PD Amount 4 Inthe Select table column enable the check boxes of the tanks that should be totaled Notice m At least one tank must be selected for the calcu
118. e SCE30B Endress Hauser 9 Viewing analysis data Analysis workplace 9 5 Chart daily This chart shows the outflow inflow or the difference between the inflow and outflow for the period entered depending on the option selected KP Outflown flow Chart hourty From date 3 22 2011 H Todate 3 27 2011 E Time zone UTC 01 00 6 5 4 m au E 3 1 a a ae 2 1 o 22 Mar 23 Mar 24 Mar 25 Mar 26 Mar 27 Mar M W oiov T BB show ony deta O ka column M W io O le Line Using the From date and To date fields specify a period for Chart daily Select the type of chart via the Column or Line buttons Lo o Quasad y If you move the cursor over a graph in the chart a window appears with the name of the graph the specific measured value and the time stamp 77 78 10 Viewing tank locations on the map Map workplace SupplyCare Enterprise SCE30B 10 Viewing tank locations on the map Map workplace Notice The Map menu item is available to people with Read only Scheduler or Operator configured as their user role m As of version 2 08 onwards only the Professional version of SupplyCare Enterprise software for Endress Hauser s end customers includes an access to Google Maps service Endress Hauser voluntarily provides this service on the base of a dedicated Google OEM ID licensed to Endress Hauser by Google together with the right to allow Endress Hauser s customers to access
119. e are displayed as follows in the standard factory setting yyyy MM dd HH mm ss Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 3 User interface 4 4 Viewing secondaries A range of measuring devices allows additional measured variables secondary to be recorded in addition to the primary variable If secondary values have also been assigned to a tank you can view these values in the Workplace Tank view in the overview table in the Inventory chart tab and in the Tank details tab A maximum of one primary value and eight secondary values can be assigned to a tank Notice m The unit for the primary value is specified via the Unit field in the Tank details tab In the case of mass units and volume units priority is given to your settings for the Mass unit or Volume unit fields in the User preferences menu item m The units for the secondary values are specified in the Measuring point details tab in the Engineering unit for application field 4 4 1 Viewing secondaries in the overview table in the Tank menu item Notice The secondary values are hidden or displayed depending on the system settings The secondary values are hidden in the default standard setting 1 Click the Workplace menu in the Navigation window 2 Click the Tank menu item 3 The following detail view is displayed in the Application window orkplace gt gt Tank El Show secondary data Unit Time zone Locatio
120. e g due to fluctuating levels The hysteresis applies to the following events Plan point Ship point and Safety stock Standard tank 11 Managing master data Recycling tank Capacity Hysteresis Capacity Hysteresis a The level falls below the limit value for the Plan point The Plan point reached event is triggered The status of the event is set to Open The level climbs back above the limit value for the Plan point The status for event a remains Open The tank status switches to OK green The level falls back below the limit value for the Plan point No new event is triggered The status for event a remains Open The tank status switches to Plan point reached yellow No new event is triggered as the level has not first climbed above the limit value for the Plan point plus the hysteresis The level rises above the limit value for the Plan point plus the hysteresis Event a now assumes the status Done The level falls back below the limit value for the Plan point A new Plan point reached event is triggered The status of the event is set to Open a The level climbs above the limit value for the Plan point The Plan point reached event is triggered The status of the event is set to Open The level falls below the limit value for the Plan point The status for event a remains Open The tank status switches to OK green The level climbs
121. e gateways m Assign a measuring device to a tank m Upload an existing linearization table m Create change and delete a linearization table m View logged on users login reports gateway tank and contract reports m Configure contract specific splash screen and information window m Determine contract specific subject line for event messages m Set up e mail connection m Write messages Change their own user profile Local system administrator The local system administrator has the following authorizations Configure gateways m Assign a measuring device to a tank m Create change and delete a linearization table Upload an existing linearization table m Process alarm messages m Change contract settings Configure contract specific splash screen and information window m Determine contract specific subject line for event messages m Change their own user profile m View logged on users login reports gateway tank and contract reports 196 Endress Hauser SupplyCare Enterprise SCE30B 17 User roles and authorization Read only Person with Read only configured as their user role are authorized to perform the following m View tanks measured values m View personalized tank view m View tanks on a map Google Maps m View and save measured value history a View tank details m View location details m View tank service status m View events m Perform totaling m Change their own user profile m Make user preferenc
122. e name is displayed in the Name column in the table 12 Click the Upload new file button 13 The file is listed in the table with information on the file format file name file size and the date the file was last changed Opening or saving a file 1 Click the Configuration menu in the Navigation window 2 Click the Tank menu item 3 Select the Tank notes tab 4 Click the File name hyperlink in the Name column in the table 5 A dialog box opens Here you can choose whether you want to open the file or save it 6 Click OK to open or save the file Click Cancel to abort the process Deleting a file 1 Click the Configuration menu in the Navigation window Click the Tank menu item Select the Tank notes tab Click the button The Tank notes tab is displayed in the edit mode In the table enable the check box for the file that you want to delete Click the Ml button The prompt Do you really want to delete is displayed SS at A E A A a Click OK to delete the file Click Cancel to abort the process Ha Click E to save your changes Click to abort the process Notice m The file is only deleted if you save your changes by pressing the El button m You can change or delete descriptions in the Notes Data 1 Data 2 and Data 3 fields in the 98 Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data editing mode Click E to save the changes 11 3 7 Changing a tank gt See Page 27
123. e the button It is no longer possible to enter information These input fields can be activated by clicking the gray button in question 8 Select a graphic depicting the appropriate tank shape see Page 92 9 Click to save your entries Click to abort the process 10 Select the Tank groups tab 11 Click the 34 button 12 The tab is displayed in the edit mode Tank details Secondaries Tank freeze Tank groups Tank Ox Assign Name Description gt All Tanks US Operations dl APAC Operations Fi EU Operations BBS od v 13 Activating the check box in the Assign column assigns the tank to a tank group 14 Click El to save your entries Click to abort the process Standard tank and recycling tank SupplyCare distinguishes between standard tanks and recycling tanks From a standard tank the product is withdrawn For a recycling tank the tank is filled with the product Activating the Recycling check box turns the standard tank into a recycling tank The display logic in the inventory chart and the notification logic are changed according to the following illustration Standard tank Recycling tank Capacity Capacity Safety stock Plan point Ship point Plan point Safety stock Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser Hysteresis The hysteresis pertains solely to event notifications The hysteresis prevents multiple triggering of an event notification
124. e the first template 3 Enter a template name The template name can have a maximum of 64 characters 4 Click El to save your changes Click to abort the process 8 2 2 Overwriting an existing template 1 Perform all the steps specified in Chapter Saving a selection as a template see Page 69 2 Click the button 3 The Overwrite existing template dialog box is displayed Overwrite existing template Template name gt IC 03 mix IC 03000 IC 04000 LNG 01000 4 Inthe overview table click the template you wish to overwrite 5 The template is displayed in the Save selection as template window Save selection as template E x Template name IC 03 mix IC 03000 6 Ifyou want to undo your selection click the button then click the button and select another template 7 Click the button if you want to save the selection Click the button if you want to abort the process Notice A tank is deleted from a template automatically if the tank is deleted or if the tank is no longer part of the tank group that was assigned to a user Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 5 Viewing personalized tank view My tank view workplace 8 3 Selecting or deleting templates 1 Click the Open button in the overview 2 The Template overview window is displayed Template overview Template name gt IC 03 mix IC 03000 IC 04000 LNG 01000 If you want to accept a
125. e the order of the value pairs Ti Make your changes Click El to save your entries Click to abort the process Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration Deleting a linearization table Notice You can only delete a linearization table if the linearization table is not assigned to a measuring device 1 In the overview table click the linearization table you wish to delete 2 The related tab is displayed in the lower section of the Application window Configuration Graph Upload File Upload 0 4 45 Name Linearization table 1 Index gt Input level gt Input volume gt Description Description 3 20 30 40 60 70 80 90 a a r a a E a a a S rts OO coo oN en di tf BI Gc 10 of 3 Click the button 4 The prompt Do you really want to delete is displayed 5 Click the OK button to delete the linearization table Click Cancel to abort the process 12 10 2 Displaying a linearization table as a graph 1 In the overview table click the linearization table you wish to view as a graph 2 Select the Graph tab 3 The selected linearization table is displayed as a graph Configuration Upload File Upload Linearization table 1 100 Input volume a O 1 2 3 4 Input level 161 12 System administration 162 SupplyCare Enterprise SCE30B 12 10 3 Uploading a linearization table 1 Select the Configuration tab
126. e zone Comment A form with the following fields is shown on this tab Message Comment Acknowledge and In process In addition the display also shows the Amount Time stamp Unit Time zone and Comments fields for standard tanks for planned deliveries and for recycling tanks for planned disposals 6 2 2 Freeze event details Freeze event details Mark as done Message Freeze event detected by measurement Value 61 750 0 Unit kg Time stamp 11 6 13 5 50 PM Time zone UTC 00 00 Limit Value 61 655 0 Unit kg Time stamp 11 6 13 4 55 PM Time zone UTC 00 00 Freeze event delta 420 Unit kg A form with the following fields is shown on this tab Message Value of the received measurement Unit of the tank Time stamp of the measurement in the respective time zone Time zone of the measurement In addition the display shows in the lower section information on the Limit Value Frozen measurement in respective Unit Unit of the tank Time stamp of the frozen measurement in the respective time zone Time zone of the frozen measurement Freeze event delta Unit of the tank Click the Mark as done button to acknowledge the event The following message appears A Y O Successfully marked the event as Done Ok Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 5 Viewing personalized tank view My tank view workplace Click OK Notice A Freeze event will only be
127. eactivate the data destination OPC XML Data Access for the local server application Remote OPC XML DA clients can connect to SPC OPC Client Data Destination OPC Client 15 Close the Configurator and save the project when promted to do so Then right mouse click on the system tray icon and hit the Start option Open Softing Easy Connect Configuration1 Tray Start Configurator Start O v Stop Run Mode Open Online Help Show Web Pages 90 Exit Tray Application 16 The icon in the tray shall be now in green Notice With some OPC Servers it may be reasonable that the OPC Bridge must start with a time delay We recommend to use the Freeware Startup Delayer in this case 17 Install and set up the program Startup Delayer if applicable see Page 187 18 Restart the PC 19 Make sure that the OPC Connection is running after the application is started 186 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 15 2 Notice 15 OPC Connection Installing and configuring the Startup Delayer program With some OPC Servers it may be reasonable that the OPC Bridge must start with a time delay We recommend to use the Freeware Startup Delayer in this case l 4 Click Next The file startdelay_v2 3b134 exe can be found in the directory opcBridge on the Installation CD Start the installation procedure with a double click on file startdelay_v2 3b134
128. econdaries Tank groups Tank notes Ol 3 Copy to other tanks Activate o Delta calculation absolute percentaged Freeze event delta 1000 Unit kg Time zone UTC 00 00 Coordinated Uni Repetition rule Weekly on every From time To time jg Mon 48 0 y until end of day 7 all day p Tue 7 all day 7 Wed g 0 g 0 E until end of day F all day y Thu _ _ jm until end of day fp all day Fi _ ae until end of day py all day m Sat _ mn until end of day 5 all day F Sun _ y until end of day 5 all day Select the weekdays for which to configure the monitoring times Select a From time start time and a To time end time for the monitoring for tank freeze events of the selected day If the To time is smaller than the From time the monitoring time extends into the next weekday E g if for a selected Monday a From time of 18 00 and a To time of 6 00 is configured the monitoring time runs from 18 00 on Monday to 6 00 on Tuesday even if the Tuesday is not selected Select until end of day for a selected weekday to set the end of the monitoring time to 23 59 i e substituting To time with 23 59 If until end of day is selected To time is disabled and hidden Select all day for a selected weekday to set the monitoring time from 0 00 to 23 59 i e substituting From time with 0 00 and To time with 23 59 If all day is selected From time and To time are disa
129. ed error while executing the Check number of For further information see lt ErrorMessage gt e mails service lt ErrorMessage gt information 11702 Too few measurements While executing the Check number of e mails service For further information see the comment the following missing gateway scans were identified in the alarm message 11703 Too many measurements While executing the Check number of e mails service For further information see the comment too many gateway scans were identified in the alarm message 11801 Check expected gateway scan failed Unexpected error while executing the For further information see lt ErrorMessage gt CheckExpectedGatewayScan service lt ErrorMessage gt information 11802 Gateway scan missing While executing the heckExpectedGatewayScan Check Log File service missing gateway retrievals were identified 11901 Check Gateway Device Measurepoint Unexpected error while executing the For further information see state failed lt ErrorMessage gt GatewayDeviceMPState service lt ErrorMessage gt information 11902 Gateway lt status errorlwarning gt While executing the Eliminate gateway error CheckGatewayDeviceMeasurepointState service a gateway with the status nicht in Ordnung was found 11903 Device lt status errorlwarning While executing the Eliminate device error CheckGatewayDeviceMeasurepointState service a device with the status nicht in Ordnung was found 11904 Mea
130. ed for the tank and measuring point an error message is displayed m The secondary values which you assign to the tank here are displayed under the Tank menu item in the Secondaries tab Endress Hauser 157 12 System administration 158 SupplyCare Enterprise SCE30B 3 Click the button to assign the measuring point to the tank as a main measuring value primary or as a secondary Measure point details Assign measuring points to tank H x Tank name IC Waste Tank type gt Standard tank Tank notes Material Safety Instructions must be signed off fo Recycling tank Gateway Device Measure point Primary EU Operations Device 1 1 Secondary 1 EU Operations Device 5 1 Secondary 2 APAC Operations Device 3 1 Secondary 3 Secondary 4 Secondary 5 Secondary 6 Secondary T Secondary 8 4 You can delete the existing assignment using the i button 5 Click to save your entries Click 4 to abort the process Creating a new tank 1 Click the Tank setup wizard button 2 Follow the instructions as described in Chapter 11 3 1 Creating a tank 12 10 Managing linearization tables Notice m Only people whose user role is configured as System administrator or Local system administrator can create change and delete linearization tables m A linearization table is assigned to a device in the Gateway configuration menu see Page 146 By means of a linearization table a measured
131. eferences is used as the default language If no language is selected in the user preferences the column names are in English 8 Click the Next button The Tank assignment dialog box is displayed Select the tanks Assignment type Tank Tank group All Location Al Product Al Supplier All Tankname gt Notes gt Location gt dl IC Waste Material Safety Instructions must be signed off for ewery EU Operations UK C ic oz000 US Operations West C LNG Waste Material Safety Instructions must be signed off for ewery APAC Operations TH C LNG 01000 APAC Operations 6 C coio US Operations North C ic 03000 HQ C IC 03 mix Ha Fi IC Waste Il Material Safety Instructions must be signed off for ewery EU Operations PL __jots Back Next Cancel Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data 9 By means of the table you can activate the check boxes to assign the corresponding tanks to this report 10 Click the Next button For CIDX and CSV reports validation is performed to check whether the configuration complies with the specifications The Format selection dialog box is displayed Step 4 out of 6 Format selection Select the output format O TXT ESY XML PDF XLS 11 You can select how the report is output here XLS Excel file CSV CSV file XML XML file PDF PDF file TXT text file 12 Click the Finish button to finish
132. election for the field Unit volume in the User preferences menu item has priority over the setting in the Tank menu item Time stamp Time stamp of last primary value The time stamp of the time zone for the last valid measured value is used Also see Time zone field m In the case of aggregated tanks the time stamp from the associated tank which supplied the most recent measured value is used Product The product name is selected in the Configuration menu in menu item Tank field Product The product is specified in the Product menu item Location The location is selected in the Configuration menu in menu item Tank field Location The location is specified in the Location menu item Time zone Time zone of time stamp The time zone of the location is used Standard delivery time in days or hours The standard delivery time for the tank is specified in the Configuration menu in menu item Tank field Standard delivery time Capacity The capacity of the tank is specified in the Configuration menu in menu item Tank field Capacity The number of places after the decimal point is defined in the Configuration menu Unit menu item Optimum The optimum capacity of the tank is specified in the Configuration menu in menu item Tank field Optimum The number of places after the decimal point is defined in the Configuration menu Unit menu item Endress Hauser SupplyCare E
133. enu items and the value in the DSST days until the safety stock is reached column in the overview table in the Tank menu point Selection 2 days 7 days 14 days 30 days or 90 days Factory setting a 14 analysis charthourly period This value corresponds to the Period selection field Workplace gt Analysis chart hourly The charts hourly are displayed for the period configured here Selection m day 2 days 3 days 4 days 5 days 6 days or 7 days Factory setting m day cm dailyScanAmount digit Codes For the communication variant E mail you have the option to monitor the number of incoming e mails with measured values The number must be within a specified range The count includes only the e mails that have a valid three digit number code in the subject line This parameter specifies which codes are included in the count As standard the code 005 is specified for Endress Hauser gateways see Page 150 Factory setting 005 cm dailyScanAmount interval This parameter defines the default value for the Interval h field in the Gateway configuration menu item for the E mail communication variant when creating a new gateway see Page 150 Selection m no monitoring 1 h 6h 12h or 24 h Factory setting m empty cm dailyScanAmount This parameter specifies the standard value for the Number of e mails per interval h in the Gateway configuration menu item for the
134. er 79 10 Viewing tank locations on the map Map workplace SupplyCare Enterprise SCE30B 10 2 Tank details 1 Ifyou click a tank on the map this opens up a window containing more detailed information 2 The following data are displayed for the tank IC 02000 US Operations West 30 6 9111112 3 10 AM UTC 05 00 Product IC 020 2 Ok Planned delivery 54 2 e 9 29 12 12 00 PM UTC 05 00 Plan delivery Scroll icons if there are several tanks in one location Tank name along with the number and total quantity of tanks if there are several tanks in one location Location Value and unit Time stamp and time zone Product Status of the tank with the symbol for the event Amount and unit deliverable for standard tanks or recyclable for recycling tanks if a disposal or delivery is not planned PD amount and unit as well as PD date and time of delivery disposal if a delivery or disposal is planned Plan delivery or Plan disposal button 3 To close the window click the Close icon on the top right 10 3 Planning a disposal or delivery 1 Click the Plan delivery or Plan disposal button in the window with the tank details 2 The Plan delivery or Plan disposal dialog box appears Plan delivery 3 Click the button 4 Select the Date for the planned delivery disposal in the calendar or enter the date manually 5 The Value Amount and Range fields are compu
135. eries sist o aioe ds 74 Number of disposadi oido i ae EE EE 74 O OP POCO aa dh E ONE 181 OPC Configurator Tool A Youve Be hae See ae ee Bee eee 190 OPC CONNECCION tatoo amp doe dowd ed 181 OPG DELVE A O ho here ek 181 Di A eed Ss Sathu oe ue ie ie Ae woe 8 DET tarda Pa ease ee 16 197 DA ae tere ee a eee eT Eee 35 38 200 SupplyCare Enterprise SCE30B OUR Sence a 36 39 as A e O 74 OOO oo baina Ea E eae Bees 145 P He OU OM CU CM och mi ss ate E E ceo E pasate A ee T 125 A ias as 36 A II a ea Aes 37 PDE PDE TOUNCA ON eri 143 AMS te ads doo e aida 20 Porade Niny ereire E ar ee 50 60 63 65 Padi AAA ap ERA 50 60 63 65 E ON 39 Pinned AAA od a Rigee al Rach woes aac ds 36 Planned disposals rra a Sa eee eS Oe ee 36 FOR Ga VAC AA 14 PP pla POM 222 5 plead bee ete vee es se 36 POJU Aa de aren inne ait eee 35 38 73 108 Produet del ei aia ace ead Dae ee 108 PP O IN 108 A a ate auth ag ge eine Batata ee 175 R Read ON A oea EE E A 16 197 CGV CHIME Yaa 2 eaea LE EO 39 PREC YC III COINS a TE 37 Recvcline TAKS ss otitis arb dah a eea 64 MAA E T T 50 65 Report oru esee era oa 116 A E EE E EES os Ba E EE ama 112 S O A A e eee ares ane 39 SATE LVSIOCK fea CMCC nro 75 SCMOCUINET 25 5 at nts a aa owes eso gees ee 16 197 CACAO 5S ic 63 64 152 DI ea ao a da de 36 A Gotnk ats Arse a feos aon ee neen e aaa 25 Sear nio IO Updates ria e 194 Second aa is 45 53 93 Selec Tam Ke WICEUT raia ten ds 102 Selecting changing
136. es Operator The Operator is authorized to perform the following m View tanks measured values m View personalized tank view m View tanks on a map Google Maps a View and save measured value history m Analyze the history of existing measured values a View tank details m View location details m Change tank service status m View and edit events a View event history m Perform totaling m Change their own user profile m Make user preferences Scheduler The Scheduler is authorized to perform the following m View tanks measured values m View personalized tank view m View tanks on a map Google Maps m View and save measured value history a View notifications and status displays on planned disposals and deliveries m View tank details m View location details m View tank service status a View and edit events m Set the resubmission date a View event history m Plan deliveries and disposals m Perform totaling m Change their own user profile m Make user preferences Endress Hauser 197 17 User roles and authorization SupplyCare Enterprise SCE30B 198 Endress Hauser SupplyCare Enterprise SCE30B Index A AD aaa aa td 73 ADO e erea enaa a th ee a eee eee a 73 A eera id aa 167 O a E 168 Alane ds A whieh ahd cle a AE e E a E 167 Amount for planned delivery 37 Amount for planned disposal 37 NS A A A EE E TEE 72 Applicaton WINdOW std ds id 17 Assign Measuri
137. etal rs 147 154 EA A econ AAA 180 CAMAS ts oe 11 146 154 H EUSTON Cal Valles a doi aa 47 A A Aon ease ee 76 FLV tersa oda o 36 39 I EE AE EEEE A E E T EA ae E T ERE 18 MCO yei atte soe hated Gut E A bate eenie et 146 O A 74 Hain raras aid 8 Index Vento CATE ASA 37 57 K LA ate coarse Sr aiae areca E A eae oka eee 125 Key performance MaICalOTS ais 73 IPS EEEE E oaths Ba ate A eos ee ate 73 L AA 5 5 ta dvd eh sees abla th ela ab ea we aed abe demas 178 Ee E 35 e AA A 140 A naer e R EA ane eens ee 158 Linearization table ai ore Bee tb 158 A I 160 E A aude eo ee e 159 CICUG ctra ook ale eee 161 UP Ad ida ees 162 163 LACAN ada iia 159 Local system administrator as pss idas 16 196 LOCA 0 Se epi eto ads 35 38 73 104 HOC ATION detal 0 taaan di 40 104 DOGO OU ts 15 M Masterdala ir Doa Baier erin 16 196 Maximum A 75 M aSUTMTS Poin pain sb ae ou oe een eens 155 Menu CONTOU OM 2 esi tense E E Ss 16 PIS CIENO dabas 164 PLONE eene a ae 16 System administration ada EEA 16 OBP dan da ds 16 MA ity he oleh actetaah shots nde E G 16 MEUS PERA 15 A ETE ENE EE EEE E oe ate 33 Mino CHIT ADC oa os 75 MOntonno tanks tocada dira tbca dp ae disc 34 N Navigation WANG OW tati dr baii asi 15 NEWS Way Sa fe gute hee ate ta ee EEE uNa 173 A WAV S 6 oS do aad NE tet ket AEEA 164 Next planned Telve rats 74 Next planned disposal sis ari ii dde 74 INES A is 35 Notes and Metals 39 NOUNCAUOIN ri DE 33 135 Number of deliv
138. evice 4 2 1 1 A O Hotes 4 The following data are displayed for every gateway Gateway name of the gateway Unique ID gateway unique ID Device name of the device that is assigned to the gateway Measure point name of the measuring point which is connected to the gateway Tank name of the tank which is connected to the measuring point Assignment assignment of the measured value 1 for the primary value 2 3 4 5 6 7 8 and 9 for secondary values empty if the measuring point is not assigned to any tank Location location of the tank if available Notes empty or x if notes are available Gateway access communication version of the gateway Aggregated tank displays the tank name of the aggregated tank if the tank is assigned to an aggregated tank 5 Click the button to export the table as an Excel file 6 Click the button to make notes on a tank Notice Notes are assigned to the tank Notes can only be made if a tank is assigned to the gateway Endress Hauser SupplyCare Enterprise SCE30B 15 OPC Connection 15 OPC Connection The OPC Bridge Wrapper connects SupplyCare Enterprise SCE30B via OPC DA 1 0 2 0 or 3 0 with the OPC Server The installation of the OPC bridge is described in the Getting Started BAO0054S Notice Please note that the OPC Bridge requires a license The trial version is fully functional with a limited time period For cont
139. ew and of Detailed view can differ as can the contents of the dialog windows Most of the Application windows contain the following views m Overview m Detailed view Overview Detailed view Endress Hauser E HIRAI CEEE EET 111 gal VA Endress Hauser EJ em Propane Sonora A PE Ranch Geter Overview The users or data are listed in tabular form in the overview Detailed view Detailed information on the line selected in the table is displayed in the lower section Left clicking another line in the Overview opens up the detailed view of the information Where necessary the information in the detailed view is split even further into tabs Tabs Using the tabs you can create change and delete new objects Forms or tables are displayed in the tab Inventory chart Notes and files Tank partners Location details Tank service status Download history Organization Limits Tank name Ic 02000 Capacity 100 0 Value 20 61 Optimum Unit Plan point 50 0 Time stamp 9 11 12 3 10 AM Ship point Product Product IC 020 Safety stock 35 0 Location US Operations West Hysteresis 2 0 Time zone UTC 05 00 Free capacity 19 4 SDT 23 Tank type Standard tank Recycling tank Endress Hauser 17 3 User interface 18 SupplyCare Enterprise SCE30B 3 3 Elements The following elements are available in the individual views Button Function Input fields One line input fields to enter a val
140. exe Click the I Agree button for the acceptance of the licence terms F Startup Delayer 2 3 build 134 Setup Press Page Down to see the rest of the agreement This is a legally binding agreement between you and severably the members of the group known as 12 Studios By installing or continuing to use the software you agree to the terms of this agreement rz Studios assigns you a non exclusive non assignable and personal license to use the software based on your continued compliance with the terms of this agreement The grant of this license is not and cannot be deemed to be an assignment of the software For the avoidance of doubt r2 Studios expressly withholds ownership of all copyright trademarks and all other intellectual property rights contained in the software The software is Freeware and you may distribute it to other parties via electronic means hd IF vou accept the terms of the agreement click 1 Agree to continue You must accept the agreement to install Startup Delayer conca f Startup Delayer 2 3 build 134 Setup Setup will install Startup Delayer in the Following Folder To install in a different Folder click Browse and select another Folder Click Next to continue Destination Folder Browse Space required 2 4MB Space available 18 066 lt Back Cancel 187 15 OPC Connection SupplyCare Enterprise SCE30B 5 Click the Install button IF Startup Delayer 2 3 build 134
141. f tank 10 Limit walue 11 Limit unit 12 Salutation 13 Title 14 Supplier of tank 415 Buyer of tank 9 Inthe Subject Custom field enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables e g Ewent notification Freeze ewent notification PDL PDE notification Subject l Subject Default Secondary limit name Secondary Secondary name Tank name Location te Subject Custom Limit notification 5 2 3 9 4 8 c Body Limit Language 10 Click the button to close the Available variables legend 11 Select the desired limit from the Limit picklist 12 The Language picklist can be edited as soon as the limit has been selected 13 Select the desired language from the Language picklist Endress Hauser 141 12 System administration 142 SupplyCare Enterprise SCE30B 14 The standard text template appears as soon as the language has been selected Event notification Freeze event notification Limit notification POL PDE notification Subject Default Secondary limit name Secondary Secondary name Tank name Location e Subject Custom Limit notification 5 2 3 9 4 87 o Body Limit Limit 1 Language EN 8 gB Show preview ii Dear 0 1 the value of 2 in the tank silo 3 at 4 has reached 5 Value 6 7 Time Stamp 8 3010511 15 Click
142. f the FIS gateway The FIS ID is only displayed if the FIS gateway has not been incorporated into SupplyCare Unique ID Unique ID of the gateway Once the FIS gateway has been incorporated into SupplyCare it is assigned a unique ID This unique ID is retained even if the gate way is later deleted from SupplyCare Order code Order code of the gateway Channel Gateway type 166 Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 12 12 Displaying and editing system alarms Alarm messages are generated at technical problems Notice m Only people whose user role is configured as System administrator or Local system administrator can process alarm messages m If the Alarm by mail field in the User roles tab in the User menu item has been enabled for a user the alarm message is also sent to this user s e mail address 1 Click the System administration menu in the Navigation window 2 Click the Alarm menu item 3 The following is displayed in the Application window Status Nachricht ErstelltS AktualisiertS Betroffene Objekte Alarmnummer 10 03 10 ModemJob failed Could not connect to modem 2146 2503 1114 41 Gateway 11451 21 04 10 E ScanGateway failed Gateway changed 10 07 30 03 11 17 25 Gateway 11351 ModemJob failed 24 09 10 E com endress infoserve supplycare connectionmanager telephony SupplyCareTelephonyException 25 03 11 14 38 Gateway 11401 java net ConnectException Co
143. figuring aggregated tank freeze events gt See Page 94 Chapter 11 3 5 11 4 6 Changing an aggregated tank gt See Page 27 Chapter 3 6 5 11 4 7 Deleting an aggregated tank gt See Page 30 Chapter 3 6 8 11 4 8 Copying an aggregated tank See Page 31 Chapter 3 6 9 Endress Hauser 103 11 Managing master data 104 SupplyCare Enterprise SCE30B 11 5 Managing locations Notice Only people whose user role is configured as Master Data can create change and delete locations 11 5 1 Creating a location Notice A tank must be created before you can assign this tank to a location However you can first create the location and then assign the tanks to a location at a later date 1 Click the Configuration menu in the Navigation window 2 Click the Location menu item 3 The following detail view is displayed in the Application window Configuration gt gt Location El Company All Company City Country gt Time zone Mustermann AG Birsfelden Switzerland UTC 01 00 Mustermann AG Madrid Spain UTC 01 00 Mustermann AG Leeds GB UTC 01 00 Mustermann AG California USA UTC 05 00 Mustermann AG Bangkok Thailand UTC 08 00 sjors z Location details Tanks at location Location notes O 21 Name HO Street Company Mustermann AG City Birsfelden Manager Zip code Time zone UTC 01 00 Amsterdam Berl State Country Switzerland Latitude 4755377190 Longitude 7 62790409999995 4 In the
144. following appears on the display HHHHHHHHHHHHHHHH 1 Click the Configuration menu in the Navigation window 2 Click the Tank menu item 3 Select the Tank details tab 4 Click the button 5 The tab is displayed in the edit mode 6 Click the button 7 The Select tank picture dialog box is displayed 8 Click the picture of the tank shape that applies for the tank you created 9 The selected graphic is added to the Tank details tab 10 Click to save your selection Click to abort the process Deleting a depicted tank shape 1 Click the Configuration menu in the Navigation window Click the Tank menu item Select the Tank details tab Click the button The tab is displayed in the edit mode Click the Ml button in the Tank shape graphic The prompt Do you really want to delete is displayed SS at E E E Click OK to delete the graphic The No tank picture selected graphic is displayed Click Cancel to abort the process 9 Click El to save your changes Click to abort the process Notice The picture is only deleted if you save your changes with the El button 92 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data 11 3 3 Changing tank tank group assignment 1 Click the Configuration menu in the Navigation window Click the Tank menu item In the table click the tank whose assignment you want to change Select the Tank groups tab Click the but
145. fon cm telefon rasdialExe Path of the rasdial exe Windows file This parameter is required for the Telephone communication version User entry m Text Factory setting a C WINDOWS system32 rasdial exe cm telefon retries Number of attempts to establish a phone connection if a line is was busy If the value is exceeded an alarm is triggered This parameter corresponds to the Number of retries field in the Gateway configuration menu item for the Telephone communication version Input range 0 to 2147483647 integer Factory setting a5 Endress Hauser 127 12 System administration 128 Key SupplyCare Enterprise SCE30B Description cm telefon retry intervall Interval in ms between the attempts to establish a telephone connection This parameter corresponds to the Retry interval field in the Gateway configuration menu item for the Telephone communication version Input range m to 2147483647 integer Factory setting m 30000 instrument configuration store Directory for local storage of OPC configuration file Factory setting m SupplyCarelnstallDir data InstrumentConfigurationStore fis default password User password fis default user FIS user with which SupplyCare accesses the FIS gateway forecastbasedon default This value corresponds to the Forecast base on field Configuration gt Tank Tank details Configuration gt Aggregate
146. g aggregated tanks oooo o 99 11 4 1 Creating an aggregated tank 99 11 4 2 Selecting and deleting a depicted tank MADE EE E be ced ae T 102 11 4 3 Adding opening and deleting files and other information for an aggregated tank 103 11 8 12 12 1 122 123 12 4 12 5 12 6 Table of Contents 11 4 4 Changing aggregated tank tank group ASSEN vx toe Bawa env ees 103 11 4 5 Configuring aggregated tank freeze events 103 11 4 6 Changing an aggregated tank 103 11 4 7 Deleting an aggregated tank 103 11 4 8 Copying an aggregated tank 103 Managing locations o oooooooooo o 104 11 5 1 Creating a location sc 104 11 5 2 Adding opening and deleting files and other information for a location 105 11 5 3 Changing location tank assignment 105 11 5 4 Computing the location automatically or entering it manually eds 107 11 5 5 Displaying the location on the map 107 11 5 6 Changing a location 107 11 5 7 Deleting a location ca Paves eos 107 11 5 8 Copying a location vedada 107 Managing products rr ds 108 11 6 1 Creating a product natos ries 108 11 6 2 Changing product tank assignment 109 11 6 3 Changing a product 2er 110 11 6 4 Deleting a DrOduUst eE 110 11 6 5 Copying a product sisi 110 Managing tank groups sata 110 11 7 1 Changing tank groups boi 110 11 7 2 Assigning users to a tank group and setting up notifications for ta
147. gated object planned delivery disposal to OK GREEN several tanks objects available at the location All the tanks objects have the OK status The tanks objects can have different scheduling statuses delivery disposal planned or not planned Plan point Observance limit reached YELLOW no delivery disposal planned Plan point Observance limit reached YELLOW planned delivery disposal Plan point Observance limit reached YELLOW aggregated tank aggregated object no delivery disposal planned Plan point Observance limit reached YELLOW aggregated tank aggregated object planned delivery disposal Ship point Point of action reached ORANGE no delivery disposal planned Ship point Point of action reached ORANGE planned delivery disposal Ship point Point of action reached ORANGE aggregated tank aggregated Object no delivery disposal planned ees e g Ese ELE GS gee eee Ship point Point of action reached ORANGE aggregated tank aggregated object planned delivery disposal 21 3 User interface SupplyCare Enterprise SCE30B Meaning Safety stock Critical limit reached RED no delivery disposal planned Safety stock Critical limit reached RED planned delivery disposal Safety stock Critical limit reached RED aggregated tank aggregated object no delivery disposal planned Safety stock Critical limit reached
148. ge 20 The following events result in the Bad measurements status No main measuring value primary value is assigned to the measuring point m The time stamp of the measured value is older than the last retrieval by the Gateway scheduler service m Too many e mails have arrived m Too few e mails have arrived m The XML tag vstslvl shows the error levels 1 warning or 2 error XML is the abbreviation for Extensible Markup Language XML is a markup language used to display hierarchically structured data in the form of text data XML is used among other things for the platform and implementation independent exchange of data between computer systems 12 15 Creating new gateways for communication via e mail In the New gateways table all gateways are listed that have sent an e mail to SupplyCare and whose Unique 1D is not yet known to SupplyCare This list enables you to transfer the listed gateways to the system As soon as you have accepted a gateway it is deleted from the New gateways table You configure the gateway via the Gateway configuration menu item Notice m Only people whose user role is configured as System administrator can view the New gateways menu item and include gateways m This menu item is not available to users whose user role is configured as Local system administrator However local system administrators can create configure and replace gateways via the Gateway configuration menu i
149. generated once during a check period The status of the event is Open until it is marked as done If a new Freeze event occurs in the next check period the previously created event is taken over to the Event history 6 2 3 Event history Event details Inventory chart Tank details Time zone GMT Time stamp Severity gt Status gt Message gt Comment gt User W25 11 4 46 PM PiN Eu Safety stock reached detected by measurement BES of This tab displays the history of an event selected in the overview table The screen includes Time stamp Severity Weighting Status Message Comment and User 6 2 4 Inventory chart The inventory chart of the associated tank is shown here for the event currently selected For a description of the Inventory chart tab see Page 37 6 2 5 Tank details The tank details of the associated tank are shown here for the event currently selected For a description of the Tank details tab see Page 38 6 3 Processing event messages Notice Only users with the Scheduler or Operator user role can comment on events and assign a status 1 Click the Workplace menu in the Navigation window 2 Click the Event menu item 3 In the overview table select the event that you want to process 57 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 58 4 In the lower section of the application window select the Event details tab Ewent history I
150. h additional text index xml e g http 123 456 789 0 index xml User Password Retry interval ms Interval between retries if the attempt to establish a connection has failed Number of retries number of retries if the attempt to establish a connection has failed Click EJ to save your entries Click E to abort the process With communication via phone RAS retrieval is carried out actively by SupplyCare and managed by the Scanning schedule see Page 152 151 12 System administration Scanning schedule Scheduling 152 SupplyCare Enterprise SCE30B d Communication via OPC XML DA OPC Server Gateway details Communication scheduling HB x Enabled Gateway access OPC XML DA J URL User Password ls using a proxy C Proxy host Proxy port Proxy user Proxy password Retry interval ms 30000 Number of retries z Timeout sec 80 Configu ration file O Unload Enter the following data here URL IP address of the OPC XML DA server e g http localhost 8090 opc da User obligatory Password Is using a proxy Proxy host Proxy port Proxy user Proxy password Retry interval interval between retries if the attempt to establish a connection has failed Number of retries number of retries if the attempt to establish a connection has failed Timeout sec time after which the connection to the serve
151. h as the system settings as a PDF file Print button for printing charts ie A Show shows contents Cancel undo Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 3 4 2 Buttons in tables You can navigate through the table via the following buttons at the bottom of the table Function Goes to the start of the table Scrolls back one page Moves the table up one line The element selected remains unchanged Moves the table down one line The element selected remains unchanged Scrolls forward one page Goes to the end of the table ooo ooo OO 4 3 Symbols for events Status display Button Meaning Open the event was triggered Acknowledged the event was acknowledged but no action has yet been taken In process measures have been initiated to replenish material Done recorded by measurement Replenishment process completed successfully vez Priority weight Button Meaning Plan point GREEN Ship point YELLOW Safety stock RED Freeze event Eye symbol with tooltip Check Endress Hauser 19 3 User interface Status display 20 3 4 4 SupplyCare Enterprise SCE30B Icons for tanks objects SupplyCare allows users to select between the template types Tank and Object These two template types have the exact same func
152. hange A Select the Tanks at location tab Location details Location notes Assigns Tank name gt Notes gt LNG 01000 BES of 5 Click the button 6 The tab is displayed in the edit mode Location details Tanks at location Location notes Ox Assign gt Tank name gt Notes LNG 01000 BES of 7 Activating the appropriate check box in the Assign column assigns the tanks to the selected location Deactivate the check box to undo the assignment 8 Click El to save your entries Click to abort the process 106 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data 11 5 4 Computing the location automatically or entering it manually Notice If you change the address data you must also update the longitude and latitude information You can either have the system compute the longitude and latitude automatically based on the address entered or you can enter this information manually Computing the location automatically 1 Click the Based on address button 2 The longitude and latitude automatically computed are displayed in a window Following address was found Hauptstrazze 144 O 4126 Bettingen Switzerland If this was not correct please enter the geocodes manually or change the address 3 Click OK to confirm the longitude and latitude If the longitude and latitude cannot be computed because not enough address information is available f
153. he e mail server Password Password of the gateway e mail account of the e mail server Local mail store E mails will be temporarily fetched to this folder E mail backup folder E mail will be copied to this folder after processing interval min 5 Interval in minutes to retriewe the gateway e maile from O Enabled 12 The relevant data for the e mail connection for incoming e mails are entered here E Mail Server obligatory User Name obligatory Password obligatory Interval in minutes obligatory 13 Activate the Enabled check box 14 Click El to save your entries Click E 4 to abort the process 15 Click Test 16 If the e mail connection has been set up correctly the message The connection test was successful is displayed 17 The e mail server is queried at regular intervals in minutes 12 8 Creating new gateways configuring gateways and replacing gateways Gateway configuration menu Notice Only people whose role is configured as System administrator or Local system administrator can create configure and replace gateways If the measured values get into the application via the communication version e mail these gateways are automatically listed by SupplyCare Via the New Gateways menu item the gateways are linked with SupplyCare see Page 172 1 In the Navigation window click the System administration menu 2 Click the Gateway configuration menu item Endress Hauser
154. he measured value 11354 ScanGateway failed Invalid Source or Error while executing the ScanGateway service The XML transmitted XML measured data are invalid or not correct 11355 ScanGateway failed No valid OPC Error while executing the ScanGateway service No Check the settings in the gateway configuration file for the current gateway valid OPC configuration file for the current Gateway configuration found found 11356 ScanGateway failed Invalid date format Error while executing the ScanGateway service An invalid date format was transmitted with the measured value 11357 ScanGateway failed Device Id is missing Error while executing the ScanGateway service Gateway ID is missing or the gateway unique ID was not transmitted with the measured value 11358 Contract ScanGateway failed FIS fis url system property not set The system property fis url was not set correctly 11359 Contract ScanGateway failed FIS ID The FIS ID has not been enabled in the missing in gateway configuration gateway configuration communication 11360 Contract ScanGateway failed FIS Error 400 Request was not Invalid request format FIS could not run a valid request 11361 Contract ScanGateway failed FIS Error 401 User not authenti The user could not be authenticated for cated the following reasons the user has not been created incorrect user name or password 11362 Contract ScanGateway failed FIS Error 403 User not authorized The specif
155. he specific days and schedule by time or frequency Schedule by select time or frequency You can specify up to 12 scan times for the Time option For the Frequency option specify an interval in hours and minutes and a start and end time for the scan The days on which a scan is executed are highlighted in color in the calendar You can scroll through the calendar on a month by month basis Click the Check connection button Notice If you choose communication by phone the Start check button appears instead of the Check connection button After clicking the Start check button the message Connection check in progress appears Please note that the connection check can take several minutes 17 18 19 20 21 22 23 Endress Hauser If the connection is fine the message Successfully tested appears Click OK Tick the Activate check box The message Enabled appears Click OK Click E to save your entries Click to abort the process The measuring points that are connected to the configured gateway are read into SupplyCare depending on the scheduling 153 12 System administration 154 SupplyCare Enterprise SCE30B 12 8 3 Replacing a gateway 1 Replace the gateway in your system 2 Inthe Navigation window click the System administration menu 3 Click the Gateway configuration menu item A The following is displayed in the Application window Enabled Name Unique ID Name Name
156. hould receive notification Endress Hauser 85 11 Managing master data 86 SupplyCare Enterprise SCE30B PP plan point SP ship point SST safety stock TF OF Tank freeze object freeze comprises all the information regarding tank freeze object freeze events PDL planned delivery disposal loop comprises all the new deliveries disposals which have been planned or deleted PDE planned delivery disposal events comprises all the early late missed and completed deliveries disposals 10 Activate the PDL planned delivery disposal loop and PDE planned delivery disposal events check boxes for the deliveries disposals for which the user should receive notification 11 Click E to save your entries Click to abort the process 11 3 Managing tanks Notice m Only people whose user role is configured as Technical system administrator or Master Data can create change and delete tanks m Depending on your configuration Objects are displayed instead of Tanks For more information refer to the appropriate chapter in the Service Manual for System administration 11 3 1 Creating a tank There are several ways to create a tank in SupplyCare you can use the Tank setup wizard or the tabs in the Configuration menu Tank menu item By using the Tank setup wizard you can easily select the tank settings for a new tank the basic settings Tank name Capacity Tank type and Tank group and other optional
157. ick the button 7 The Change password form appears in the edit mode H e Please change your password ota password New password Repeat 8 Enter your existing password and your new password Reconfirm your new password 9 Click E to save your changes Click to abort the process Endress Hauser SupplyCare Enterprise SCE30B Tank group filter filter Time zone filter Default time zone filter Endress Hauser 13 Maintaining a profile 13 3 Selecting and changing user preferences Notice Only people with Read only Scheduler or Operator configured as their user role can change the user preferences 1 Click the Profile menu in the Navigation window 2 Click the User preferences menu item User preferences Tank group fitter Time zone UTC 00 00 Dublin Edinburg Default time zone filter Location Unit mass Unit volume Language EM Defaut home page Workplace Tank as Click the button 4 The tab is displayed in the edit mode MN Here you can select or change an option for the Tank group filter Time zone Default time zone filter Default time zone filter Unit mass Unit volume Language and Default home page fields 6 Click El to save your changes Click 4 to abort the process 13 3 1 Description of the filters fields The tank group selected here is displayed after login in the Workplace Tank menu The time zone selected here is used
158. icture selected graphic is displayed Click Cancel to abort the process 9 Click E to save your changes Click E 4 to abort the process Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data Notice Moe The picture is only deleted if you save your changes with the E button 11 4 3 Adding opening and deleting files and other information for an aggregated tank Using the Tank notes tab you can add additional information for an aggregated tank and a maximum of five files The information entered here and the attached files are also displayed in the Workplace Tank view Notes and files tab For information on adding opening saving or deleting a file see Page 97 11 4 4 Changing aggregated tank tank group assignment 1 Click the Configuration menu in the Navigation window Click the Aggregated tank menu item In the overview table click the aggregated tank whose assignment you want to change Select the Tank groups tab Click the button The tab is displayed in the edit mode aS Ye Tank detail Tank list Tank freeze Tank groups Tank notes H x Assign gt Name gt Description gt All Tanks EU Operations dl APAC Operations d US Operations BBE od v 7 Activating the check box in the Assign column assigns the aggregated tank to a tank group Deactivate the check box to undo the assignment 8 Click E to save your entries Click E 4 to abort the process 11 4 5 Con
159. ied user does not have authorization for a request 11363 Contract ScanGateway failed FIS Error 404 Gateway not found The gateway was not found in FIS in FIS 11364 Contract ScanGateway failed FIS Error 204 No new measure No new measured values were found for ments found the gateway 11365 Contract ScanGateway failed FIS fis default user system property The fis default user system property was not set not specified correctly 11366 Contract ScanGateway failed FIS fis default password system The fis default password system property property not set was not specified correctly 11401 ModemJob failed lt ErrorMessage gt Unexpected error while executing the Modem service For further information see lt ErrorMessage gt information 11451 Modemjob failed Could not connect to Connection could not be made with modem Check modem gateway connection modem 11501 QueueHandler failed lt ErrorMessage gt Unexpected error while executing the QueueHandler For further information see the service lt ErrorMessage gt information 11601 AccountingReport failed Unexpected error while executing the For further information lt ErrorMessage gt AccountingReport service see lt ErrorMessage gt information 170 Endress Hauser SupplyCare Enterprise SCE30B 12 System administration Message Alarm Description Measures number 11701 Check number of e mails failed Unexpect
160. iewing analysis data Analysis workplace iii ia 72 Analysis overview table 73 KPIs key performance indicators 73 OM WATIOW 0 63 CEA a ae eda e 74 Ca NOUTI ad ds 76 An A a a At a aA 77 Viewing tank locations on the map Map workplace 78 Viewing a map and associated information 79 dank detalls aaa aa ee oe eet he d a 80 Planning a disposal or delivery 80 Managing master data 81 Managing companies ii die Shae ek eo 81 11 1 1 Creating a company traer 81 11 1 2 Changing a company lt lt 2i22 4 ied ae 82 11 1 3 Deleting a company gt tisS ach wea eal ass 82 11 1 4 Copying a company iaa 82 Manating USER eya aa 82 WA Zl Gre AAA 82 11 2 2 Assigning user roles and setting up alarms Vide Mall Aa 84 LL23 Changin QUISCL 2 2 ise astrnhacihwine bas 84 ZA Delete users raid 84 As o 85 11 2 6 Assigning tank groups to a user and setting up notifications for tank events 85 Manacine tanks ida a 86 LESA MORE SUIS AAA 86 11 3 2 Selecting and deleting a depicted tank A tie ee E ee 92 11 3 3 Changing tank tank group assignment 93 11 3 4 Configuring secondaries 93 11 3 5 Configuring tank freeze events 94 11 3 6 Adding opening and deleting files and other information for a tank 97 Ty Sef Chaneine a tank is as 99 113 9 Deleting a tank da 99 11 3 9 Copying a tank sd td a da 99 Managin
161. imit name Tank name Location O Subject Alternative 3 Limit name Tank name Location Product O Subject Alternative 4 Limit name Tank name Location Product Time stamp Time zone O Subject Custom Event notification 3 4 5 7 8 O 9 Click the button to close the Available variables legend 10 Select the desired event from the Event picklist 11 The Language picklist can be edited as soon as the event has been selected 12 Select the desired language from the Language picklist 136 Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 13 The standard text template appears as soon as the language has been selected Freeze event notification Limit notification POL PDE notification 14 Click the Subject Default Limit name i Subject Alternative 1 Limit name Tank name O Subject Alternative 2 Limit name Tank name Location O Subject Alternative 3 Limit name Tank name Location Product O Subject Alternative 4 Limit name Tank name Location Product Time stamp Time zone O Subject Custom cA Body Event Plan point hd Language En y gb Show preview G Dear 0 1 Please be advised that the inventory in the tank silo 2 at 3 has reached the plan point Please move forward with replenishment Walue 4 5 Time Stamp 6 Product 7 Plan Point 8 button above the text box if you want to change the text in the b
162. in the following areas of the program Menu Description Workplace Tank Notes and files tab Event details tab My tank view Notes and files tab Event details tab Workplace My tank view Event table Event details tab Event history tab Workplace Event Tank notes tab Configuration Tank Configuration Aggregate tank Tank notes tab Location notes tab Configuration Location The time zone filter selected here is displayed in the Time zone picklist in the Tank My tank view Event and Scheduling workplaces You can select the following values Empty the Location value is displayed in the Tank My tank view and Scheduling workplaces User preference is displayed in the Event workplace Location the Location value is displayed User preference the selected time zone is displayed The value UTC 00 00 is displayed if the time zone is empty 177 13 Maintaining a profile Unit mass filter Unit volume filter Language filter 178 SupplyCare Enterprise SCE30B m UTC the value UTC 00 00 is displayed UTC is short for Universal Time Coordinated The unit mass selected here is used in the following areas of the program if Mass is selected for the tank unit Menu Description Workplace Tank Tank table Inventory chart tab Tank details tab Event details tab Download history tab
163. indicated in the Scheduling menu item o an Aggregated recycling tanks Aggregated recycling objects how aggregated recycling tanks ageregated recycling objects are indicated in the Scheduling menu item Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 3 4 7 3 User interface Icons for disposal and delivery status Button Meaning 7 Detected the Detected status is displayed in the following situations The system has detected a delivery or disposal which has been scheduled too early or too late You can process this delivery or disposal in the Details tab using the Confirm button The system has detected a missing delivery or disposal You can process this delivery or disposal in the Details tab using the Mark as fulfilled button The system has detected that measured data are missing You can process this delivery or disposal in the Details tab using the Mark as fulfilled button Confirmed the Confirmed status is displayed in the following situations m A delivery or disposal which has been scheduled too early or too late was confirmed when the delivery disposal was created m A delivery or disposal which has been scheduled too early or too late has been confirmed in the Details tab Deleted a planned delivery or disposal has been deleted New a new delivery or disposal has been planned x Ll e Fulfilled a new delivery or disposal ha
164. ing object the current last measured inventory level of the tank object in question is above the plan point observance limit Plan point Observance limit reached YELLOW Aggregated standard tanks Aggregated standard objects the current last measured inventory level of the aggregated tank aggregated object in question is below the plan point observance limit Aggregated recycling tanks Ageregated recycling objects the current last measured inventory level of the aggregated tank aggregated object in question is above the plan point observance limit Ship point Point of action reached ORANGE Standard tank Standard object the current last measured inventory level of the tank object in question is below the ship point point of action Ship point Point of action reached ORANGE Aggregated standard tanks Aggregated standard objects the current last measured inventory level of the aggregated tank aggregated object in question is below the ship point point of action Safety stock Critical limit RED Standard tank Standard object the current last measured inventory level of the tank object in question is below the safety stock critical limit Recycling tank Recycling object the current last measured inventory level of the tank object in question is above the safety stock critical limit Safety stock Critical limit RED Aggregated standard tanks Aggregated standard objects the current last me
165. inuous use beyond that period a license is required and shall be ordered from Endress Hauser Please contact your Endress Hauser local Sales office in order to purchase the OPC option You will then receive an electronic Key Please follow the next steps in order to configure the OPC Bridge SupplyCare Enterprise SupplyCare Enterprise Application Server ia Running in Web Browser Scheduler gt read OPC items via XML Web service Intranet LAN Firewall Create XMLConfiguration File e Conte malar Aon scOpcConfigurator exe SupplyCare Enterprise Upload XMLConfiguration File Running in Web Browser ControlCare or 3rd party OPC Server OPC Client OPC Bridge Wrapper OPC Server 1 m e g m 5 XML DA 1 0 DA 1 0 2 0 3 0 Softing le I JE pi o A Intranet LAN Firewall 5 Controller SF WAGO I O im etc i Fieldbus Devices The OPC Configurator Tool generates an XML Configuration File which can be uploaded via the Gateway configuration menu in the SupplyCare Enterprise software SupplyCare Enterprise SCE30B is a web operating program and need not to be installed again The XML Configuration File includes amongst other items the list of the used OPC connections strings After uploading the XML Configuration File SupplyCare Enterprise can access to the measure points tank level measured values provided by the OPC Server through the OPC Bridge Wrapper The measuring points are provided by the O
166. is displayed the next time the user logs on 1 Click the System administration menu in the Navigation window 2 Click the Messages menu item 3 The following view is displayed in the Application window Message 2 0 Subject Message 4 Click the button 5 The tab is displayed in the edit mode 6 Fill in the following fields Subject obligatory Message 7 Click El to send the e mail Click E 4 to abort the process 174 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 13 Maintaining a profile 13 Maintaining a profile 13 1 Maintaining a user profile Notice Each person has the possibility to change his her user profile 1 Click the Profile menu in the Navigation window 2 Click the User profile menu item 3 Select the User profile tab 4 The following is an example of what is displayed in the Application window User profie Tank group assignment hy tank view ES Name Musterfrau Street First name Marlon City Title Zip code Salutation State E mail aa solutions endress com Country Phone Company Mustermann AG Mobile Fax 5 Click the 7 button 6 The tab is displayed in the edit mode 7 Make your changes You can change the fields with a white background e g Name and E mail address 8 Click El to save your changes Click to abort the process 9 The Tank group assignment tab shows you what tank grou
167. it and Description The Name is automatically generated and cannot be edited Values Units and Time stamps will be refreshed by click on the Refresh button on the Devices panel This information cannot be edited i scOpcConfigurator gatewayD001 Endress Hauser Test gateway 1 Test gateway 1 Remove Endress Hauser Endress Hauser Endress Hauser device device device3 devicel device2 device3 Measure points Iv edit ad Value lu nit UniquelD 3 13 13 Ei Ei 83 00050000050 os 09 53 0N ic M current settings 20 2l ime Stamp jQuality Save as I Remove all Connect Disconnect Language Start time 27 01 2009 09 12 11 Update time 27 01 2009 15 15 46 OPC Server Name Endress Hauser Fieldgate OPC Running state Connection state Clsld Server info DA Version running Connected 5C1 BCBBF 841 7 41 8F 44 49 C4D 25F 1 4F235 Endress Hauser GmbH Co KG DA 3 OPC Server Refresh CA Connection Test device 1 Test device 2 Test device 3 into the gateway settings see Page 145 Further functions in the OPC Configurator Tool m New Starts a new project Add resourceldentification unid FXA320_FT1 _4_ 20m4 1 1 unid FXA320_FT1 _4_ 20m4 1 hh1 unid FXA320_FT1 _4_ 20m4 1 hi1 unid FX4320_FT1 _4_ 20m4 1 101 unid FXA320_FT1 _4_ 20m4 1 111 unid FXA320_FT1 _4_ 20m4 1 t1 ch1 unid FXA320_FT1 _4_ 20m4 1 t2ch1 unid FX4320_FT1 _4_ 20m4 1 min1 unid
168. k compadres 112 A A a Galo t Slat Core bln 36 38 IC WM tard et eee Geko kee ieee ei Meee ad 36 TMEZO 2 eee a eek ote te cell oe 36 38 73 177 PP O tees aoe eevee GA 36 WON MEOW sia ii os daa 74 TOLOTO pia e Geeta Swe 74 MATIN VCP BARC os ond ate oop iat een ee atte delet atin fetal 75 Endress Hauser Index U EE Sarot ATE AAA 134 A EE cee E EE EE AEE 35 38 73 AAA O eae ds Qiu 178 Eia EEE PEET a o 114 A A NN 194 Dedin Si tae 109 USA os oe hele ore A an ate E AE 82 Meses bce stl tate a a a e ty ah tate 111 WSer details 2 IES RIE 83 MAA nn ee aden en Guard Were aw 175 Usa A E E E E E 84 User roles and authorization iii dal 196 V A T EE A 35 38 39 Vome UN era din 178 W Workplace ADAN A uo A A Bane we aes 72 O A ON 54 o bo chet 8a A A de caleste ants Se E 78 My tank VIC Wisi or od tno Sie od ening DG or hal Sas oats 51 SECANO cacti ars ete suet A aa 60 63 MU NRG AAA eaten ga A Sas 34 O cos tee Bie Le Neat aie 68 201 www endress com worldwide Endress Hauser Cai People for Process Automation
169. l Location All tate gt Tank name gt Value Unit Level Location gt Product gt Free Capacity gt coro00 10 258 51 US Operations North Product IC 010 9 741 5 20 000 A co2000 80 6 US Operations West Product IC 020 19 4 100 OF Comix 222 882 0 304 HQ Product IC 030 527 118 0 750 00 ic o3000 111 441 01 31 HQ Product IC 030 243 559 0 355 00 icom 110 964 0 gal CA Operations Product IC 040 209 036 0 320 000 icwaste 111 441 01 z CC EU Operations UK Waste IC 011 288 559 0 400 000 icwasten 111 441 01 es EU Operations PL Waste IC 011 188 559 0 300 000 icwaste m 167 161 5 kg ax 07 EU Operations ES Waste LNG 011 282 838 5 450 000 LNG 01000 410 978 01 sd APAC Operations SG Product LNG 010 289 022 0 400 000 amp LNG Waste 26 646 31 APAC Operations TH Waste LNG 011 3 353 7 30 000 of 10 y 3 In the table click the tank you want to view in greater detail 4 The details of the selected tank are displayed in the application window Workplace gt gt Tank El Hide details Unit Time zone Location Tank group All Product All Supplier All Location All State Tank name Value gt Unit gt Level gt Location Product gt Frees Capacity gt O cmoo 10 258 51 US Operations North Product IC 010 9 741 5 20 000 0 OF cozo00 80 6 US Operations West Product IC 020 19 4 100 0 OF ico3 mix 222 882 0 1 304 HQ Product IC 030 527 118 0 750 000 0 O coz 111 441 01 31 HQ Product IC 030 243 5
170. lation m Only tanks with the same unit can be totalized m Activating the check box in the Select column header selects all the tanks in the table while deactivating the check box disables all the tanks Fd tanks Recycling tanks lace gt gt Totaling El 3 Open Unit Time zone User preferences cup All Product All Supplier All Location All ect 2 State 2 Location lt 3 Tank name Level lt Value lt Unit lt Free lt Product lt Time zo Wy HQ IC 03 mix Tr 6 000 0 I 34 000 0 Product IC 030 UTC 01 J E HQ IC 03000 15 3 000 0 I 17 000 0 Product IC 030 UTC 01 APAC Operations J SG LHG 01000 bos 1 000 0 I 49 000 0 Product LNG 010 UTC 01 gt of 5 y 5 Select the unit of the selected tanks in the Unit field 6 Click the Calculate button Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace 7 The following detail view is displayed in the Application window A O gt i Calculate Level En value 10 000 01 Capacity 110 000 01 Free 100 000 01 PD Amount 00 Notice m You must press the Calculate button a second time to incorporate any changes to the selection which are made after the calculation has been performed If you do not the following message is displayed beside the Calculate button You have changed the selection Please recalculate m Clicking the Refresh view button deactivates any activated check boxes a
171. le Click the button to create a new tank group The Create new tank group dialog window appears Create new tank group Enter the following data Name mandatory Description Click E to save your entries Click to abort the process Click Next to enter more optional tank settings click Cancel to cancel the process or click Finish to finish creating the tank 87 11 Managing master data SupplyCare Enterprise SCE30B 13 When you click Next the Step 2 out of 2 Optional tank settings dialog window appears Step 2 out of 2 Optional tank settings x Configure optional tank settings Tank name Product IC 500 R Capacity 20000 Location pjm Optimum o Buyer DO NO a Pian poit 0 Supplier bo MO Ship point o sor Ibas t Safety stock 0 LDLo i HO hysteresis 0 unit FF Tank type Standard tank Recycling tank ADVADO based on Days NM Include negative values Activate forecast 14 Enter the data as described on Page 89 15 Click the appropriate button to create a new location buyer supplier and product 16 Select a graphic depicting the appropriate tank shape see Page 92 17 Click Back to go back to the Step 1 out of 2 Basic tank settings dialog window click Cancel to cancel the process or Finish to finish creating the tank 88 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master d
172. les SupplyCare Enterprise to retrieve the measured values Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 2 System description Gateways Fieldgates Endress Hauser measuring devices are retrieved by gateways so called Fieldgates For the creation and configuration of new gateways see Chapter 12 8 OPC Connection Measuring devices of other companies can be retrieved by an OPC Connection SupplyCare Enterprise supports the OPC SML DA 1 0 web communication variant An OPC Bridge is required for the retrieval of OPC DA 1 0 2 0 or 3 0 connections via COM DCOM This bridge connects itself via COM DCOM with the OPC Server and provides an OPC XML web service Soap Technology This OPC Bridge is supplied together with the SupplyCare Enterprise CD and separately licensed SupplyCare Enterprise Application Server Windows Service Apache Tomcat F SupplyCare Enterprise ad P Running in Web Browser Scheduler Database Connection Manager OPC Server OPC Bridge OPC Connection Endress Hauser Gateways gt Endress Hauser Gateways A 4 Fieldgates Fieldgates HTTP Connection via Ethernet of Modem GSM Endress Hauser Devices Measuring Devices 0 e g Fieldbus About incoming e mails from the gateways Fieldgates Another possibility is to receive the measured values from the incoming e mails from the gateways There the measured values are embedded in the gateway e
173. lication window select the Tank details tab Capacity 0 optimum Plan point Ship point Safety stock Hysteresis June C Tank type By activating the Standard tank checkbox you specify that the aggregated tank is a standard type of tank and by activating the Recycling tank checkbox you specify that the tank is a recycling tank The event messages and the way the inventory chart and levels are displayed are adapted to this tank type see Page 90 ADI ADO based on 14 days is the standard value specified here This period is used for extrapolating in the inventory chart Page 37 Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data Include negative values If this option is enabled negative measuring values are included in the ADI ADO calculations Activate forecast If this option is enabled a forecast of the inventory is displayed in the Inventory Chart tab The enabled forecast is displayed with a green button the disabled forecast is displayed with a red button This option can be changed in edit mode by clicking the green or red button Use product unit if this option is activated the unit of the selected product is automatically used in the Unit field Capacity read only Optimum Plan point Ship point Safety stock Hysteresis Page 91 Unit obligatory 8 Inthe case of astandard tank it is possible to deactivate the Optimum Pl
174. linearization table Name obligatory Description obligatory you can enter a multiline description here Index specifies the index in the table Input level enter the level value Input volume specify the volume value belonging to the level value 159 12 System administration 160 O 7 SupplyCare Enterprise SCE30B Click E to save your entries Click HE to abort the process Changing a linearization table I Ze In the overview table click the linearization table you wish to change Configuration Graph Upload File Upload 0 w pia Name Linearization table 1 Index Inputlevel Input volume gt Description Description 1 0 2 1 a 2 Fl 3 6 5 T 6 a T 3 8 10 3 of 3 Click the button fl 4 The tab is displayed in the edit mode Configuration Graph Upload File Upload Select the Graph tab to view the linearization table you entered as a graph The related tab is displayed in the lower section of the Application window 20 30 40 60 70 amp 0 50 Hx Name Linearization table 1 Index InputlevelS Input volume gt Description Description 1 0 0 2 1 10 3 2 20 4 3 30 5 4 40 6 5 50 T7 6 60 8 7 70 9 a 60 10 9 30 of 5 In the table click the value input level or input volume you want to change You can overwrite several values in succession or fill the table with more value pairs Notice You cannot enter or delete lines in the table or chang
175. lower section of the Application window Secondaries Tank freeze Tank groups Tank notes 06 a db Tank setup wizard Tank name Ic 02000 m Capacity Es a US Operations West Optimum Buyer Buyer AG Plan point En Supplier Supplier AG Ship point SDT 2 Days Safety stock 35 Product Product IC 020 Hysteresis 2 E Use product unit Unit 0 Tank type 7 Standard tank Recycling tank ADIADO based on 14 Days E Include negative values Activate forecast 7 Click the 4 button Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 8 The tab is displayed in the edit mode B x Tank name Ic 02000 a 100 Location Optimum Buyer Plan point Supplier Ship point soT Safety stock Product i Hysteresis z Toduct U DO BE product un Unit 0 Tank type Standard tank Recycling tank AWADO based on Days FP Include negative values Activate forecast 9 Make your changes 10 Click El to save your changes Click to abort the process 11 Ifyou want to make changes to the Tank groups tab proceed as described for the Tank details tab 3 6 6 Displaying modified master data in full If a text that has been entered in an input box is too long to be displayed in full in a table column it is truncated However if you hover the cursor over the text the text is displayed in full in a sep arate info box Configuration gt gt Tank
176. lter Default home page in the User preferences menu item editable event notification limit notification and PDL PDE notification scaling table e mail error messages new time zone format 2 03 03 BA000555 04 en 13 11 The following menus are implemented Scheduling and Analysis The following tabs are implemented Notes and files Tank notes Location notes Second aries Customer specific unit UI Customizing and Event notification Additional illustration of second ary values implemented in the Tank overview table and the inventory chart Following user roles imple mented Local system administrator and Analysis user 2 02 XX BA0555 04 en 09 10 Additional functions alarm hysteresis recycling tank export and download in Excel managing number of places after the decimal point per unit group 2 00 xx BA0555 04 en 03 10 Revision of program design 1 01 xx BA0555 04 en 12 08 OPC Connection 1 00 xx BA0555 04 en 12 07 Original Registered trademarks Microsoft and the Microsoft logo are registered trademarks of the Microsoft Corporation Google Maps is a service of Google Incorporated iOS is a trademark or registered trademark of Cisco in the U S and other countries and is used under liscense Safari iPhone and iPad are trademarks of Apple Inc registered in the U S and other coun tries Opera and O logo are trademarks of Opera Software ASA All
177. m Tank or Object Factory setting m Tank notesAndFiles recordselection default Select whether or not the data or notes entered are to be displayed in the Notes and files tab Workplace gt Tank Notes and files as standard Selection data or notes Factory setting m data notesAndFiles tmp Directory for temporary storage of the files Factory setting SuppyCarelnstallDir data supplycaretemp product unit default Default product unit User entry Unit Factory setting L product unit default density unitmass Default mass unit User entry m Mass unit Factory setting a kg product unit default density unitvolume Default volume unit User entry Unit volume Factory setting L product unit default density value Default density value User entry m 1 40239846E 45f to 3 40282347E 38f Factory setting m 129 12 System administration 130 Key SupplyCare Enterprise SCE30B Description report cidxIncludeNamespace Indicates whether name spaces are used in the CIDX XMLs This key is used for generation of CIDX reports Selection m true or false Factory setting m true report enable max Maximal number of reports that can be scheduled Factory setting a5 reportGroupTempMailPath Directory for local temporary storage of e mail reports Factory setting SupplyCarelInstallDir data reports mail reportG
178. m The m symbol is only displayed for a user who can be deleted 11 2 5 Copying a user See Page 31 Chapter 3 6 9 11 2 6 Assigning tank groups to a user and setting up notifications for tank events You can assign one or more tank groups to the user using the Tank groups tab On this tab you can also specify the tank events which the user should be informed about 1 Click the Configuration menu in the Navigation window 2 Click the User menu item 3 In the table click the user whose assignment you want to edit 4 Select the Tank groups tab User details User roles Tank groups Es Assign 2 Tank group Description By e mail PP SP S57 TF POL PDE Recycling tanks Standard tanks BBE of 5 Click the 4 button 6 The tab is displayed in the edit mode User details User roles Tank groups E x llAssign Tankgroup 3 Description By e mail PP SP SST TF PDL PDE Fl Recycling tanks F 4 Standard tanks BBE of 7 Activating the check box in the Assign column assigns a tank group to the user Deactivate the check box to undo the assignment The assigned tank groups are listed in the Workplace Tank view 8 Activate the By E Mail check box if you want the user to also be informed about tank events by e mail The e mail connection must be set up for SupplyCare before the user can be notified by mail see Page 145 9 Enable the check boxes corresponding to the events for which the user s
179. most recent measured value is used Time zone Time zone of time stamp The field can also be displayed for existing secondary values The time zone of the location is used DSST days until the safety stock is reached Indicates the estimated number of days remaining until the safety stock is reached The value is calculated with the average quantity per day The calculated average quantity is based on the Forecast based on value PD planned delivery planned disposal The date and time for the next planned delivery are displayed for standard tanks The date and time for the next disposal are displayed for recycling tanks The field is empty if no delivery or disposal has been planned The time zone of the location is used Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser Columns Description 3 User interface PD amount amount for planned delivery amount for planned disposal the Unit column Amount for the planned delivery and disposal The unit corresponds to the unit in 4 1 2 Inventory chart The historical and expected pattern for the inventory is displayed in the diagram for the period selected The distribution is 2 3 for the history measured values and 1 3 for extrapolation calculated values If the tank is out of service only the historic pattern of the inventory is displayed The expected pattern for the inventory is not displayed Tank
180. n ank group All Product All Supplier All Location All tate Tank name gt Value gt Unit gt gt Location Product gt Frees Capacity gt 2 S cooo 10 258 51 US Operations North Product IC 010 9 741 5 20 000 amp ico2000 80 6 US Operations West Product IC 020 19 4 100 D Comix 222 882 0 I 304 HQ Product IC 030 527 118 0 750 000 1c 03000 111 441 01 31 HQ Product IC 030 243 559 0 355 000 ico 110 964 0 gal CA Operations Product IC 040 209 036 0 320 000 icwaste 111 441 01 z O EU Operations UK Waste IC 011 288 559 0 400 000 E IC Waste Il 111 441 01 63 D EU Operations PL Waste IC 011 188 559 0 300 000 icwastem 167 161 5 kg ess 07 EU Operations ES Waste LNG 011 282 838 5 450 000 LNG 01000 110 978 01 Bk APAC Operations SG Product LNG 010 289 022 0 400 000 Y Luc waste 26 646 31 C APAC Operations TH Waste LNG 011 3 353 7 30 000 of 10 Click the Show secondary data button N All the associated secondary data are shown underneath the specific tanks Of the secondary data the following data are shown if available Tank name Value Unit Hysteresis Limit 1 and Limit 2 The tank name corresponds to the Name field in the Secondaries tab in the Tank menu item 6 Click the Hide secondary data button to hide the secondary data 45 3 User interface 46 SupplyCare Enterprise SCE30B 4 4 2 Viewing secondaries in the inventory chart Notice Users with the Master
181. n the inventory chart The inventory chart displays the values measured up to the present date with a continuous line and the values calculated from the present date with a broken line No forecast values are available for secondary values In the case of standard tanks the forecast values are calculated from the Average daily outflow value In the case of recycling tanks the forecast values are calculated from the Average daily inflow value 47 3 User interface SupplyCare Enterprise SCE30B The inventory chart offers the following additional functionalities Mouseover function Additional information is displayed if you move the cursor over a graph in the inventory chart If the point in the graph is in the past the Inventory window appears with information on the measured value and the time stamp If the point in the graph is in the future the Forecast window appears with information on the calculated value and the time stamp Tank detail Notes and files Tank partners Location details Tank service status Download history Capacity 100 0 Time zone UTC 05 00 Scaling Min Max Period selection 30 days 100 Inventory Value 50 8 Time stamp 09 11 12 2 10 AM 75 50 percent 25 l 5ep 3 5ep 5 p sp S Sep 11 Sep 13 5ep 15 5p 17 Sep 19 Sep 21 Sep 23 5ep 25 5p 27 5Sep 29 Sep W A e Clicking on a point in the A dialog box appears if you click on a point in the graph with the cursor The Historic
182. nd deletes the calculated values in the detail view However anything selected via the picklists of the various fields in the table header is retained 8 2 Saving a selection as a template The choice of tanks or aggregated tanks can be saved as a template 1 Click the Workplace menu in the Navigation window Click the Totaling menu item In the Select table column select the check boxes of the tanks that should be totaled select the unit of the selected tanks in the Unit field Click the Calculate button The El Save button appears in the header of the table Click the El Save button The Save selection as template dialog box appears on the display ee ae Se Save selection as template ES Template name Notice Wailea The and buttons do not appear in the dialog box when you create the first template 9 Click the E button 10 The dialog box appears in the editing mode Save selection as template O x Template name You have two options you can either create a new template or overwrite an existing template Endress Hauser 69 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 70 8 2 1 Creating a new template 1 Perform all the steps specified in Chapter Saving a selection as a template see Page 69 2 In the Save selection as template dialog box click the k button Notice The A button does not appear in the dialog box when you creat
183. ndow System properties Contract properties Basic jobs Modules To embed your customized pictures please upload the corresponding files as JPG PNG GIF or BMP images To show the default picture simply delete your uploaded one Take care of the dimensions to avoid deformation of your image kaaga ensereen ien a image Maximum filesize 400 KB suggested dimensions 400 x 300 px Splash screen headline Welcome to SupphyCare Select navigation image oS ti Maximum filesize 50 KB Suggested dimensions 170 x 170 px Company name Addition 1 Addition 2 Addition 3 Addition 4 Addition 5 5 Click the button 6 Configure the splash screen as follows Select splash screen image Select a graphic in your directory using the Search button Upload the graphic via the Upload button Splash screen headline Enter text If a graphic was uploaded the text Welcome to SupplyCare is displayed by default 7 Configure the information window as follows Select navigation image Select a graphic in your directory using the Search button Upload the graphic using the Upload button Company name Enter the company name for example The text is displayed in bold Additional text 1 to 5 Enter additional information 8 Configure the header image as follows Endress Hauser SupplyCare Enterprise SCE30B 12 System administration Select header image Select a graphic in your directory using the
184. ndress Hauser 139 12 System administration 5 SupplyCare Enterprise SCE30B Click the button above the text box if you want to change the text in the box The text box appears in the editing mode H ag Reload default template g Show preview a Dear 0 1 The value of 2 at 3 has exceeded has fallen below freeze event delta Value 4 5 Time Stamp 6 Frozen measurement 7 87 Freeze event delta 9 Notice Wela You can enter a maximum of 500 characters in the text box The difference between the maximum number of characters and the number of characters already used is indicated under the text box Io 17 18 19 20 21 ZZ 23 Click the i button above the text box to display the Available variables legend Edit the text box enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables Click the button to close the Available variables legend Click the lt 4 Show preview button to see a preview of the text of the event notification Preview Freeze event EN Dear First name Name The value of Tank name at Location has exceeded has fallen below freeze event delta Value Value Unit Time Stamp Time stamp Time zone Frozen measurement Frozen measurement value Frozen measurement unit Freeze event detta Freeze event delta and unit Click the button to close the preview window
185. ne UTC 01 00 Freeze event delta 0 1 Unit kg 4 To filter the displayed events select the filter criteria View Select between All Only limit events or Only freeze events Status Select between All except for done Only open Only acknowledged Only in process or Only done The filters Only acknowledged and Only in process exclusively have an effect on limit events Any other filter will effect both types of events Severity Select between All Only low Only medium or Only high The filters Only low and Only medium and Only high exclusively have an effect on limit events Any other filter will effect both types of events If the set filters do not overlap each other i e resulting in no events the previous filter settings are restored The following error message is displayed a A No events found Ok 55 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 56 5 Inthe overview table click on an event which you would like to view or for which you require further information 6 You can select the following tabs in the lower area of the application window Event details Freeze Event details Event history Inventory chart or Tank details 6 2 1 Event details Event history Inventory chart Tank detaile Message Safety stock reached detected by measurement Status Acknowledge Comment In process Planned disposal Amount Unit Time stamp Tim
186. nformation 11301 ErrorMessages OPC are not classified with other reason codes in the moment 11301 Configuration file contains an invalid OPC At least one OPC item found in the OPC configuration Modify the OPC connection configuration item file that is not existing on the OPC server file 11301 OPC Endpoint returned an invalid The OPC XML DA Server has sent an invalid SOAP Check the OPC XML DA server response message 11301 OPC Endpoint returned OPC Errors OPC server has returned an error Ignoring OPC errors can be set in the OPC configuration file lt propertykey ignoreOPCErrors gt false lt property gt Remove this entry if you want to ignore OPC errors or fix the OPC problem Endress Hauser 169 12 System administration SupplyCare Enterprise SCE30B Message Alarm Description Measures number 11351 ScanGateway failed Gateway changed Error while executing the ScanGateway service The Replace gateway gateway has been replaced The gateway type or the Reset gateway unique ID via GUI gateway unique ID have changed e g due to a device change 11352 ScanGateway failed Gateway Id is Error while executing the ScanGateway service The missing gateway unique ID was not transmitted with the measured value 11353 ScanGateway failed Gateway tag is Error while executing the ScanGateway service The missing gateway day was not transmitted with t
187. ng Points to TaMK 156 Assigning a measuring point ss a peak 155 Average dal VANO Wa dd Ban beets 73 74 PV CT AGG OU es ais 73 74 Average delivery quantity iS 75 Average disposal QUAN rra dio 75 PV CLAS Inventory eVel 6 3 rd ree 75 AVetape Tale Or Usage eiar Laid cae a R tec 75 Average safety stock reached cid A 75 B Bad Measurement da 39 O oe ecce tee torsse ce nis E EE deta Ga 132 POV ss a ween ane Sed ee eS ede a 8 36 A Seite hae cease te dw e EEE a ache 36 C Gaal ea sh Se toe laseuh aia dise 36 38 GRASO ie cate se Cele Bee eh aaah ee ete ee 27 Changing a password iras eii 176 Changing aggregated tank tank group assignment 103 Changing location tank assignment 105 Chanine master Cates colt ee eee eee ks 27 Changing product tank assignment 109 Changing tank tank group assignment 93 Changing user tank group assignment 85 COMMISSION MO Seok ee eh ee ae CMON ee ea dle Ses 8 COMMUNICATION arder dana 149 Esmas a road sado aia 150 Mierne ssl dass 149 OPE OE aiii nea 152 PP O E 151 COMPAN iaeia E A A 81 Company aleta iS ds bye ete eee a wae a 81 Conio ON 2 22 93 airis 159 Configuring aggregated tank freeze events 103 COMMOUMMNG teeze events ereton da dad 94 Configuring secondaries ccc 2eueivendat tedden tee eas 93 COMM OUMNS SCIVICES a Ri oe 132 CONSUMOS iaa lia 39 Copy deliver 225 da aa e ds 67 COPY CISPOSalis ida ia 67 Creating
188. ng tanks Displays the number of disposals made for the period entered Frequency of deliveries Frequency of disposals Standard tanks Average interval between two deliveries for the period entered m Recycling tanks Average interval between two disposals for the period entered 9 3 Outflow Inflow The tab displays important indicators for the inflow and outflow of the selected tank KPlE Outflow in flow Chart hourky Chart daily From date 12 30 2010 E To date 3 30 2011 H 4 Show available period El ii Actual period between first and last measurement from 12 30 2010 to 3302011 l Average inventory level Average delivery quantity Turnover rate Average rate of usage Maximum value Minimum value Satety stock reached Average safety stock reached 33 Using the From date and To date fields you can enter a period for which you want to analyze the values If you enable the Show available period check box all the saved values will be analyzed Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser Description of fields Field 9 Viewing analysis data Analysis workplace Description Average inventory level Displays the average amount for the period entered Average delivery quantity Average disposal quantity Standard tanks Displays the average delivery quantity for the period entered Recycling tanks Displays the average disposal quanti
189. nk events 111 11 7 3 Sending test event e mail user assignment cion asi 112 11 7 4 Changing tank groups sico lana 113 11 7 5 Deleting tank groups isis daros 114 ELZO Gopying tank groups 21d 114 Managing UNSa prada ias pro 114 11 8 1 Changing number of places after the decimal DOME toas ao oa 114 11 8 2 Managing customer specific units 115 11 8 3 Deleting a customer specific unit 116 IWAN a OMI Oa Tepo opera ade 116 11 9 1 Creating a report so see std a Mate ee cs 117 11 9 2 Downloading the report as a PDF file 123 11 9 3 Creating reports and sending them immediate epa ks Sek a eae ae 123 MO 4 Ghancino a TepOrt susse Saat eas 123 LS Deleting a tep rt iad inaa 123 11 9 6 Copying a TDCi 123 System administration 124 Changing system properties 124 12 1 1 Changing system properties 124 12 1 2 Parameters keys and input range table 125 Configuring services basic jobs 132 Configuring database backup 133 Configuring the splash screen and information window UI Customizing soci dr 134 A A ee are ae 135 Defining notification 22 Sled me eae eaets 135 12 6 1 Defining and editing event notification 135 Endress Hauser SupplyCare Enterprise SCE30B 122 12 8 12 9 12 10 12 11 12 12 12 13 12 14 12 15 12 6 2 Defining and editing freeze event notification Freeze event notification 12 6 3 Defining and editing
190. nkfurt_Tank0 mpl etc Integers Integer 8 All rows with the value 8 integer 0 gt integer gt 8 All rows with values greater than 8 gt integer gt 8 All rows with values greater than or equal to 8 lt integer lt 8 All rows with values less than 8 lt integer lt 6 All rows with values less than or equal to 8 Integer integer 8 100 All rows with values between 8 and 100 lt gt integer lt gt 8 All rows with values not equal to 8 linteger 18 Integer oF All rows with values that start with 8 Floating point gt floating point number gt 8 0 All rows with values greater than 8 numbers lt floating point number lt 8 0 All rows with values less than 8 Floating point number 8 0 100 50 All rows with values between 8 0 and 100 50 floating point number Floating point number 8 All rows with values that start with 8 wildcard 25 3 User interface 20 SupplyCare Enterprise SCE30B Date columns are converted for display purposes so they can be filtered link a string column 3 6 2 Filtering the data records displayed picklist You can use picklists to filter the data records displayed such as for Unit Time zone or Product If you have selected a value from the picklist the data records that match the filter criteria are automatically displayed The content of the picklists is reset to the default values when you leave the overview El Refresh view Show secondary data Unit Time zone Location Tank g
191. nnection timed out connect Ji 05 11 10 E ScanGateway failed java net ConnectException Connection timed out 12 09 25 03 11 14 41 Gateway 11301 08 11 10 E Device warning 30 03 11 13 15 Device 11903 09 16 Bees 1 von 142 Alarmdetails rmdetails Alarm Historie i valid The val s for th Nachricht ModemJob failed Could not conr Kommentar a ee ee configured tanks of ReportGoup Status a Best tigt py Erledigt Notice a The button in the table header opens a context menu This context menu is used to show and hide the following columns in the overview Status Created date amp time Updated date amp time Items Affected Priority Comment and Category m The digits in the Priority column have the following meanings 1 Major Critical 2 Warning and 3 Information Alarms with priority 1 can be automatically confirmed by the system 4 In the lower section of the application window select the Alarm Details tab 5 Click the button Endress Hauser 167 12 System administration SupplyCare Enterprise SCE30B 6 The tab is displayed in the edit mode Alarm details Alarm history H x Message ModemJob failed Could net conr Comment pero not walid There are Walid measurements for the configured tanks of ReportGoup Status DM Acknowledged O Done 7 You can now carry out the following Acknowledged Status Acknowledge the alarm Done Status set the alarm to the Done sta
192. nterprise SCE30B Endress Hauser Field 3 User interface Description Plan point The plan point of the tank is specified in the Configuration menu in menu item Tank field Plan point The number of places after the decimal point is defined in the Configuration menu Unit menu item Ship point The ship point of the tank is specified in the Configuration menu in menu item Tank field Ship point If the Recycling check box is enabled the ship point is not displayed The number of places after the decimal point is defined in the Configuration menu Unit menu item Safety stock The safety stock of the tank is specified in the Configuration menu in menu item Tank field Safety stock The number of places after the decimal point is defined in the Configuration menu Unit menu item Hysteresis The hysteresis serves to prevent constant event messages e g due to a fluctuating level gt See Page 91 The number of places after the decimal point is defined in the Configuration menu Unit menu item Free capacity The free capacity of the tank is calculated Recycling By activating the Recycling check box you specify that the tank is a Recycling type tank The display of the inventory chart and the event messages are adapted to this tank type gt See Page 90 Constituent tanks This field is displayed for aggregated tanks only All corresponding tanks a
193. nufacturer Endress Hauser m Tag Test gateway 1 Description Frastgatse Model a 8 Leave the Model requestedSamplingRate ms subscriptionPolledRefreshRetries subscriptionPolledRefreshInterval ms subscriptionPingRate ms ignoreOPCErrors and ignoreltemValueQuality fields blank to use the default values The factory setting is automatically applied to the empty fields 9 The OPC prefix is the name of the data source you have entered in the Softing Easy Connect Suite see Page 183 MY_DATA SOURCE_NAME 10 Uncheck the Edit checkbox on the Gateway panel to leave the edit mode 11 Click the Save or Save As button to save the settings The chosen filename will be displayed in the top panel scOpcConfigurator Save as Connect Disconnect Language OPC Server Parameter Value j OPC Server Name Endress Hauser Fieldgate OPC Start time 27 01 2009 09 12 11 UniquelD gateway0001 Running state running Update time 27 01 2009 15 04 45 Manufacturer Endress Hauser Connection state Connected Taq Test gateway 1 Clsld l 5C1BCBBF 8417 418F 4449 CAD25F14F235 Description Test gateway 1 Server info Endress Hauser GmbH Co KG DA Version DA 3 OPC Server Model lt Devices H edit Add i aq Manufacturer Description Connection Remove Remove all E Add UniauelD faa value Unit Time Stamp Quality fresourceldentiicaion Des miion 12 Click the Add button on
194. nventory chart Tank details 5 6 Message Safety stock reached detected by measurement Status Acknowledge Comment In process Planned disposal Amount Unit Time stamp Time zone Comment a Click the button The tab is displayed in the edit mode Event details Event history Inventory chart Tank details H x Message Safety stock reached detected by measurement Status Acknowledge Com ment O In process Planned disposal Amount Unit Time stamp Time zone Comment 7 Ifyou have acknowledged this event activate the Acknowledge check box If replenishment measures have already been initiated activate the In process check box and change the resubmission date if necessary You can enter comments on this event in the Comment section Notice If the status of the event was set to In process the system monitors whether the tank is replenished by the resubmission date If this is not the case the status of the event is reset to Open and the appropriate notification messages are triggered As standard the Resubmission date is calculated from the standard delivery time This can also be set individually for every event however 8 Click E to save your changes Click to abort the process Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace Endress Hauser 6 4 Setting the resubmission date Notice m Only people whose
195. o an external OPC server oaran pra ify the address of the external OPC server Select the filter data items for the actual data source Enter a name for the data source Be sure that the correct options are selected see figure Then click Next Settings On this wizard page the basic settings of the actual data source connection to an external OPC server is configured Data Source Name Specify the name of the actual data source This name is also always the name of the root node for the actual data source and must therefore be unique throughout the whole configuration You can specify exactly one single empty data source name per configuration The data items of this single date source will be directly added into the root node of the name space of the local application The data source name must not contain any namespace or property delimiter characters like or Y Data source name MY_DATA_SOURCE_NAME j Server Type Select the type of the external OPC server for the actual data source 9 OPC DA Server OPC AE Server O XML DA Server 183 15 OPC Connection 184 9 SupplyCare Enterprise SCE30B Select the OPC Server from the list OPC Server On this wizard page the external OPC server for the actual data source connection is defined OPC Server Select one of the discovered OPC servers from the list below or manually specify the server address at the bottom of this wizard page
196. o save your entries Click 4 to abort the process 11 7 3 Sending test event e mail user assignment Notice Waa Only individuals with Master Data configured as their user role can send test event e mails m A test event e mail is created in the language that corresponds to the language setting of the specific addressee in the Configuration menu User menu item You can send test event e mails in the User assignment tab The Send test event e mail button is only displayed if you are outside the edit mode The button is not displayed in the edit mode 1 Click the Configuration menu in the Navigation window 2 Click the Tank group menu item 3 Select the User assignment tab 112 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data 4 The following detail view is displayed in the Application window Configuration gt gt Tank group El EF Name Description All Tanks APAC Operations EU Operations US Operations BEE jof4 Tank assignment User assignment Send test event e mail E Assign 2 Firstname lt Name By e mail PP SP S57 TF PDL PDE Fd Claude Fischer Ca a a El El El El Fil Customer Support E H w E E T T T F E Martina Meister F E E El El El El za ot3 5 Click the Send test event e mail button 6 The Affected user dialog box appears This lists all the users who are assigned to the selected tank group in the upper section of the A
197. ociated tanks is displayed Tanks with status Out of service are not included If all associated tanks are Out of service 0 is displayed as the value The number of places after the decimal point is defined in the Configuration menu Unit menu item Unit Indicates the unit The field can also be displayed for existing secondary values The unit for the primary value is selected via the Unit field in the Tank details tab The units for the other measured values secondary are selected in the Profile menu in the User preferences tab m n the case of mass units the selection for the field Unit mass in the User preferences menu item has priority over the setting in the Tank menu item m In the case of volume units the selection for the field Unit volume in the User preferences menu item has priority over the setting in the Tank menu item Free The free capacity of the tank is calculated Product The product name is selected in the Configuration menu in menu item Tank field Product The product is specified in the Product menu item Notes Indicates whether tank and or location notes are available Optimum The optimum capacity of the tank is specified in the Configuration menu in menu item Tank field Optimum The number of places after the decimal point is defined in the Configuration menu Unit menu item Endress Hauser 35 3 User interface 36 Columns
198. od selection 30 days T 100 percent gt 11 Sep 13 Sep 15 Sep 17 Sep 19 Sep 21 Sep 23 Sep 25 Sep 27 Sep 29 5ep w 40 e 6 n 52 Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace Endress Hauser 5 1 Viewing secondaries Notice The 4 button is also displayed if secondary data are available for the tank 1 Click the button to display the secondary data 2 A submenu opens The first menu item displays the tank name of the primary value This can be followed by up to eight secondary names wowo a D m IC 03000 H Outside temp bottom P Outside temp top 3 Inside temp bottom Inside temp top 6 22 12 12 00 PM UTC 01 00 Select the appropriate secondary name 4 The following secondary data are displayed Tank name Secondary name Value with unit Time stamp with time zone Click the amp button again to return to the primary data Select the tank name of the primary value in the submenu 53 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 54 6 Editing events Event workplace 6 1 Event management Status and weighting of events An event is triggered if a limit value is undershot Plan point Ship point Safety stock The status of the event is then set to Open The weighting severity is derived from the limit value i e reaching the plan point is categorized as not
199. oduct Limit value and unit Limit name Supplier Buyer Salutation Title Free Endress Hauser SupplyCare Enterprise SCE30B 12 System administration 9 In the Subject Custom field enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables e g Limit notification POL PDE notification Freeze event notification Event notification O 3 Subject Subject Default Freeze event Tank name Location p Subject Custom Freeze event notification 3 4 5 7 8 a p Body Limit Language 10 Click the button to close the Available variables legend 11 Select the desired limit from the Limit picklist 12 The Language picklist can be edited as soon as the limit has been selected 13 Select the desired language from the Language picklist 14 The standard text template appears as soon as the language has been selected Limit notification PDL PDE notification Event notification Freeze event notification B x Subject Subject Default Freeze event Tank name Location Subject Custom Freeze event notification 3 4 5 7 8 i Body Limit Freeze event Language EN z7 Show preview Y Dear 0 1 The value of 2 at 3 has exceeded has fallen below freeze event delta Value 4 5 Time Stamp 6 Frozen measurement 7 6 Freeze event delta 9 E
200. om out again Inventory chart Capacity 100 0 timezone uTc 0500 Scaling Min max 7 Period selection 30 days 100 T E a hal ha gi a _ x ep 9 Sep 11 5ep 13 Sep 15 5ep 17 Sep 19 5ep 21 5ep 23 5ep 25 Sep 27 5ep 29 5ep w 40 e 6 00 Endress Hauser 49 3 User interface 50 4 7 SupplyCare Enterprise SCE30B Planning disposal and delivery via the inventory chart Notice Only users with the Scheduler user role can plan deliveries for standard tanks and disposals for recycling tanks l Z 3 4 5 gt 10 jak VA 13 Click the Workplace menu in the Navigation window Click the Tank menu item In the overview table select the tank for which you want to plan a disposal or delivery In the lower section of the application window select the Inventory chart tab Click the graph in the inventory chart for the date you are planning a disposal or delivery The planned date must be in the future The Forecast value dialog box is displayed Click the Plan delivery standard tanks or Plan disposal recycling tanks button The Plan delivery dialog box appears for standard tanks The Plan disposal dialog box appears for recycling tanks Click the button The dialog box appears in the editing mode You can view and enter the following data here Value Displays the projected level Delivery date and time The day selected in the calendar is used for the date The time is
201. on of planned deliveries and disposals and can process such notification messages For a user to receive notification the PDL and or PDE check boxes must be enabled in the Tank eroup tab in the Tank group menu 1 Click the Workplace menu in the Navigation window 2 Click the Scheduling menu item 3 Click the Overview tab Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace 4 The following is displayed in the portal window with an overview of all the statuses for all the disposals and deliveries Overviews Planning Workplace gt gt Scheduling gt gt Overview El Unit Time zone Location A 5 State Message PD PD Amount Unit lt Tankname lt Time zone State changed at Buyer Supplier New planned Bee w E 7 6 00 4 500 01 IZ 01000 UTC 05 00 324642 10 37 4M Buyer AG Supplier AG elivery AM Early di elo Must 2 ary EROS 1200 3 000 01 IC Waste Il LITE 01 00 3 26712 4 36 Phi Buyer 4G ann cont AG Ph 313152 Mew planned fe 6 00 30 0 IE 02000 UTc 05 00 3 2642 10 36 4M Buyer AG Supplier AG elivery AM 3131502 Deleted x deier 1200 0 0 IE 02000 UTC 05 00 31264 2 10 36 4M Buyer AG Supplier AG j PM Missed deli 21412 r ae Bae 4 00 PM 12 000 01 Ie 03000 UTC 01 00 24542 3 52 4M Buyer AG Supplier AG BEE 1 of 7 Details History Message Mew planned delivery Planned delivery Amount 4500 0 Unit Time stamp 4 4 12 6 00 AM
202. onfiguration to the selected tanks 11 3 6 Adding opening and deleting files and other information for a tank Using the Tank notes tab you can add additional information for a tank and a maximum of five files The information entered here and the attached files are also displayed in the Workplace Tank view Notes and files tab The files must meet the following requirements m File formats supported doc xls pdf ppt jpg gif png bmp or txt Maximum file size 5 MB Adding a file i 2 J 4 Endress Hauser Click the Configuration menu in the Navigation window Click the Tank menu item In the table click the tank for which you want to add a file Select the Tank notes tab 97 11 Managing master data SupplyCare Enterprise SCE30B 5 Click the button Tank details Secondaries Tank freeze Tank groups E x Files Notes D i Material Safety Instructions must be signed off fo Material Safety Instructions muz signed off for am Meme Size Modified at every waste disposal Mustermann AG Material Sate Ai E A 11 18 11 10 57 AM Instructions IC Waste pdf Data 1 Data 2 Data 3 Bee of 6 The Tank notes tab is displayed in the edit mode 7 Enter a description for the Notes Data 1 Data 2 and Data 3 fields 8 Click the k button in the table 9 The Upload new file dialog box is displayed 10 Click the Search button 11 Select the File in your directory The fil
203. or example the Unknown or bad address Please enter manually message appears on the screen Entering the location manually Enter the longitude and latitude in the corresponding fields The latitude must be between 85 and 85 and the longitude must be between 180 and 180 You can enter a number with up to 16 decimal places 11 5 5 Displaying the location on the map gt See Page 78 Chapter 10 11 5 6 Changing a location gt See Page 27 Chapter 3 6 5 11 5 7 Deleting a location gt See Page 30 Chapter 3 6 8 Notice You can only delete a location if no tanks are assigned to the location 11 5 8 Copying a location gt See Page 31 Chapter 3 6 9 107 11 Managing master data 108 SupplyCare Enterprise SCE30B 11 6 Managing products Notice Only people whose user role is configured as Master Data can create change and delete products 11 6 1 Creating a product Notice A tank must be created before you can assign a product to a tank m However you can first create the product and then assign the tanks to a product at a later date m The Product name and the combination of the fields Identifier and Identifier agency may only be used once in the system 1 Click the Configuration menu in the Navigation window 2 Click the Product menu item 3 The following detail view is displayed in the Application window Configuration gt gt Product El Productname gt Alias gt Description 2 ABC
204. other brand and product names are trademarks or registered trademarks of the companies and organizations in question 1 Safety instructions SupplyCare Enterprise SCE30B 1 Safety instructions 1 1 Designated use SupplyCare Enterprise SCE30B is a web based operating program for coordinating the flow of material and information along the supply chain SupplyCare Enterprise SCE30B gives you complete transparency over inventory levels in tanks and silos anytime anywhere and even at remote locations Based on the measuring and transmission technology installed on site the current inventories are recorded and transmitted to SupplyCare With SupplyCare you have a constant overview of all the current inventories Critical levels are clearly indicated and you can also receive active information on these levels if required Calculated prognosis gives additional security for replenishment planning 1 2 IT Security We only provide a warranty if the device is installed and used as described in the Operating Instruc tions The device is equipped with security mechanisms to protect it against any inadvertent changes to the device settings IT security measures in line with operator s security standards and designed to provide additional protection for the device and device data transfer must be implemented by the operators them selves Endress Hauser can be contacted to provide support in performing this task 1 3 Installation commi
205. ow Click the Report menu Select the report in the upper section of the Application window In the lower section of the Application window select the General report tab Click the button The report is created in the background and sent to the recipients You receive a notification message to this effect Click Ok to confirm the notification message 11 9 4 Changing a report gt See Page 27 Chapter 3 6 5 11 9 5 Deleting a report gt See Page 30 Chapter 3 6 8 11 9 6 Copying a report See Page 31 Chapter 3 6 9 Endress Hauser 123 12 System administration 124 SupplyCare Enterprise SCE30B 12 System administration 12 1 Changing system properties Notice People whose user role is configured as System administrator can edit system properties m The parameters keys may only be changed within the permitted range see Page 125 Table Parameters keys and input range 12 1 1 Changing system properties 1 Inthe Navigation window click on the System administration menu Click the System Properties menu item Select the System properties tab amp The following view is displayed in the Application window System properties Contract properties Basic jobs Ul Customizing Modules ae Key Value gt analysis charthourly period 2 forecastbasedon detfault 50 gui chart filter max measurements 1500 gui chart period default g0 notesAndFiles recordaelection default data echeduler
206. ox The text Fa box appears in the editing mode MH E Reload default template Show preview Dear 0 1 Please be advised that the inventory in the tank silo 2 at 3 has reached the plan point Please mowe forward with replenishment Walve 4 5 Time Stamp 6 Product T Flan Point 8 Notice Wele You can enter a maximum of 500 characters in the text box The difference between the maximum number of characters and the number of characters already used is indicated under the text box lise 16 17 18 19 Endress Hauser Click the iG button above the text box to display the Available variables legend Edit the text box enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables Click the button to close the Available variables legend Click the lt a Show preview button to see a preview of the text of the event notification Preview Plan point EN ear First name Name Please be advised that the inventory in the tank silo Tank name at Location has reached the plan point Please move forward with replenishment alue Value Unit ime Stamp Time stamp Time zone Product Product Plan Point Limit value and unit Supplier Supplier Buyer Buyer Click the button to close the preview window 137 12 System administration SupplyCare Enterprise SCE30B 138 20 If necessary click th
207. pplication window and whose checkboxes are selected in the By e mail table column Affected user First name Name E mail I Customer Support Jw Claude E H Service eupport ch Fischer claudefizcherf mustermann com Beas of Add contact info L Cancel Send test event e mail 7 Select the checkboxes for the users who should receive the test event e mail and disable them for the users who should not receive the test event e mail Selecting the checkbox in the first row of the table selects all the users listed 8 If you want to provide your e mail address and phone number in the text of the test event e mail select the Add contact info checkbox on the bottom left under the table 9 The E mail and Phone fields are displayed The content of the fields is taken from the corresponding fields in the Configuration menu User menu item Overwrite the content if necessary 11 Click the Send test event e mail button to send the test event e mail Click Cancel to abort the process 11 7 4 Changing tank groups gt See Page 27 Chapter 3 6 5 113 11 Managing master data 114 SupplyCare Enterprise SCE30B 11 7 5 Deleting tank groups See Page 30 Chapter 3 6 8 11 7 6 Copying tank groups See Page 31 Chapter 3 6 9 11 8 Managing units 11 8 1 Changing number of places after the decimal point Notice Only people whose user role is configured as Master Data can change the number of places af
208. ps you are assigned to Tank group assignment My tank view Tank group Notes By e mail PP lt SP E SST Dis PDL PDE US Operations a EU Operations mm APAC Operations a All Tanks pe pe a y y y y BES ord v Notice The tank group assignment can only be changed by people with Master data user role in the Tank groups menu item 175 13 Maintaining a profile 176 SupplyCare Enterprise SCE30B 10 The My tank view tab shows all the tanks and aggregated tanks which you can access via the assigned tank groups User profile Tank group assignment Py tank view Tank name gt Hotes gt E IE 01000 Ic 02000 Tank soll reqelm lig alle 3 Wochen berpr ft werden IE 03 rmix IE 03000 IE 04000 IC Waste Material Safety Instructions must be signed off for every waste dispozall IC Waste Il IC Waste Ill LNG 01000 LNG Waste of 10 11 Click the 4 button 12 The tab is displayed in the edit mode 13 Enable the check boxes of the tanks that should be shown in the My tank view workplace 14 Click El to save your changes Click 4 to abort the process 13 2 Changing a password 1 Click the Profile menu in the Navigation window Click the User profile menu item Select the User profile tab Click the Change password field ee a The following is displayed Please change your password ord password l New password l Repeat 6 Cl
209. r Caption Start Time UniquelD Running State Last Update Manufacturer Connection State Disconnected Tag Clsld mas Ope Server Info Description DA Version Model y Devices Add gt Remove All Refresh _ UniquelD aq Manufacturer Description Mode Connection Remove Remove All a Add UniquelD fraa Value Unit Time Stamp Quality fresourceldentiication Description 4 The following screen appears Select OPC Server xX COM Computer name Refresh Available servers dOPC Simulation Server softing OPC Easy Connect Endress Hauser Fieldgate OPC Mame Endress Hauser Fieldgate OPC Clsld 5C1BCBBF 841 F 418F A559 CAD25F14F235 Cancel 5 Select the OPC Server and click the OK button Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 15 OPC Connection 6 The OPC Server status will be shown in the OPC Server panel Caption Endress Hauser Fieldgate OPC Start Time 27 01 2009 09 12 11 Running State running Last Update 27 01 2009 15 04 45 Connection State Connected Cleld 501 BCBBF 8417 418F 44 49 CAD25F14F 235 Ope Server Info Endress Hauser GmbH o KG DA Version DA 3 OPC Server 7 Check the Edit checkbox on the Gateway panel to enter the UniqueID Manufacturer Tag and Description fd edit Parameter alue Wniquelb gatewayDO01 Ma
210. r and pressing and holding the left mouse button Notice 00 00 midnight is the time that is used to determine the color or the tank status for the particular date For example if the ship point is reached at 4 a m 04 00 on May 15 and the safety stock at 8 30 p m 20 30 May 15 is given the background color red for safety stock 7 3 1 Planning a delivery or disposal 1 Click the Workplace menu in the Navigation window 2 Click the Scheduling menu item 3 Click on the Planning tab 4 Inthe overview table click the tank for which you want to plan a delivery or disposal 5 The following detail view is displayed in the Application window Plan delivery disposal Planned delivery f disposal Time zone UTC 01 00 unit ii Last Month March 2012 Mext Month Sun Mon Tue Wed Thu Fri Sat Endress Hauser SupplyCare Enterprise SCE30B 5 Viewing personalized tank view My tank view workplace 6 Click the Plan delivery Plan disposal tab 7 In the calendar where necessary use the Next month button to select the month for which you are planning a delivery or disposal 8 Click the preferred day Before clicking the day a green x beside the day indicates whether a delivery or disposal is possible on that day 9 The Plan delivery dialog box appears for standard tanks The Plan disposal dialog box appears for recycling tanks Plan disposal Di
211. r assigned to the tank m s a buyer assigned to the tank m s a location assigned to the tank s a product assigned to the tank Is a company assigned to the location m s an identifier and identifier agency set for the buyer s an identifier and identifier agency set for the supplier m s an identifier and identifier agency set for the product Is an identifier and identifier agency set for the company of the location m s a measuring point assigned to the tank 11 9 1 Creating a report Using the Report Wizard you can create a report in six simple steps You can use different report templates 1 Click the Configuration menu in the Navigation window 2 Click the Report menu item 3 In the lower section of the Application window select the General report information tab A Click the Create new report button The General report information dialog box appears Step 1 out of 6 General report info Define general information and select a template Name Description Selecta template Custom report Description of template Customizable from scratch no preselection made Next Cancel 117 11 Managing master data 118 SupplyCare Enterprise SCE30B 5 Here you can enter general data on the report such as Name obligatory unique identifier Description you can enter a multiline description here Select a template select the template for the report here 6 Click the
212. r is canceled if it does not supply all required data from the uploaded configuration file Configuration file Use the button Browse to choose the configuration file in the directory Use the button Upload to upload the configuration file Click to save your entries Click 4 to abort the process With communication via OPC XML DA retrieval is carried out actively by SupplyCare and managed by the Scanning schedule see Page 152 If Internet HTTP Telephone or OPC XML DA has been selected for the communication you have to specify a scanning schedule 12 Click the Scheduling tab 13 Click the 4 button Endress Hauser SupplyCare Enterprise SCE30B 14 12 System administration The tab is displayed in the edit mode Gateway details Communication B M Activate Start check Time zone UTC 01 00 Amsterdam Berl Overview of affected dates Repetition rule Weekly on every June 2012 gt Days e Mon W Tue W Wed I Thu I Fri Sat e Sun Sun Mon Tue Wed Thu Fri Sat Schedule by Time Frequency i 16 Minutes 3 55 From time Hours To time Here you can enter data on the scanning schedule such as Enable scheduling the scheduling rule is enabled immediately as soon as the scanning schedule has been completed Time zone Repetition rule you can select a rule here Daily possible to schedule by time or frequency Weekly on every possible to select t
213. r password Please change your password Old password Hew password Repeat 7s Click Pto edit the password 8 Enter your current password in the Old password field Enter your new password in the New password and Repeat fields 9 Click E to save the new password Notice Mejia Ifthe password is not correct you are asked to enter the password again Please contact your system administrator if you have forgotten your password Endress Hauser 13 3 User interface SupplyCare Enterprise SCE30B 3 2 Page structure 3 2 1 Portal window You can see the arrangement of the individual objects in the portal window in the graphic below Menus Menu items Portal window Header Endress Hauser L gt Navigation window Application window Notice m The menu and the appropriate menu items vary depending on the user role and thus also changes the Portal Window See Page 16 Menu items section m SupplyCare is modular in design The menu items differ for this reason Furthermore the contents of the application window can also differ as well as the contents of the dialog windows 14 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 3 User interface 3 2 2 Header Logging out You can find the link to log off in the right hand side of the header Clicking Log off takes you back to the Log in screen Please fill in the fields to login Login name Password Login
214. re displayed in this list Value aggregated tanks This field is displayed for aggregated tanks only The Value field shows the last valid measured value for the tank selected in the Constituent tanks list The number of places after the decimal point is defined in the Configuration menu Unit menu item Out of service This field is displayed for aggregated tanks only The field is activated if the tank selected in the Constituent tanks list is out of service Bad measurement s This field is displayed for aggregated tanks only The field is activated if the tank selected in the Constituent tanks list returns bad measurement data 4 1 4 Notes and files Notes data and files pertaining to the tank and location are displayed in this tab Inventory chart Tank detailz Notes and files Tank partners Location details Tank service status Event details Download history Record selection Notes Tank notes Waste tank marked as Recycling Tank Location notes Files ria Names Size Modified at BEES oto Via the Record selection field choose whether the Notes or Data should be displayed 39 3 User interface 40 SupplyCare Enterprise SCE30B Via the Files table you can open the files and save them locally as follows 1 Click the File name hyperlink in the Name column in the table 2 A dialog box opens Here you can choose whether you want to open
215. re highlighted in color in the calendar You can scroll through the calendar on a month by month basis Step 2 out of 2 Scheduling Time zone UTC 00 00 Coordinated Uni Overview of affected dates Repetition rule Daily November 2011 Is hedule by Time O Frequency Sun Mon Tue Wed Thu Fri Sat Hours Minutes Hours Minutes ee Tea p dd oh b o Back Cancel Finish 11 Click the Finish button to incorporate the FIS gateway into SupplyCare 12 The Activate gateway dialog box is displayed Click the Yes button to activate the gateway in SupplyCare The FIS gateway is displayed in the overview table in the Gateway configuration menu item The measuring points that are connected to the gateway are read into SupplyCare If you click the No button the FIS gateway is incorporated into SupplyCare but is out of service 12 11 2 FIS gateways overview table Pressing the button in the table header in the overview opens a context menu Via this context menu you can show hide and move table columns The following columns are available for the overview table Columns Description Action Button via which you can incorporate a FIS gateway SupplyCare gateway name Gateway name in SupplyCare The name is only displayed if the FIS gateway has been incorporated into SupplyCare FIS gateway name Name of the FIS gateway The name is assigned when the FIS gateway is created FIS ID ID o
216. rmed if a safety stock SST and plan point PP have been saved for the tank The system performs a plausibility check on which a planned delivery or a planned disposal is saved The planned date and the planned time are checked with the calculated values for the safety stock SST and plan point PP If the planned date is before the calculated date when the plan point will be reached a dialog box is displayed with the message In consideration of the forecast value s the planned delivery disposal date might be too early If the planned date is after the date on which the safety stock will be reached the dialog box In consideration of the forecast value s the planned delivery disposal date might be too late is displayed Endress Hauser 65 66 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B In consideration of the forecast value s the planned disposal date might be too early Confirm Reschedule Disposal date and time Reaching PP 8 1 12 12 00 PM 9 13 12 4 37 PM Click the Confirm button to confirm the date entered for the delivery disposal Click the Reschedule button to correct your entries The Plan delivery dialog box appears for standard tanks The Plan disposal dialog box appears for recycling tanks Correct your entries Click to save your changes 7 3 3 Deleting a delivery or disposal 1 Click the Workplace menu in the Navigation window Click the Sche
217. rom right to left with increasing level The percentage specified corresponds to the currently available capacity 4 1 1 Tank overview table Pressing the button in the table header in the overview opens a context menu Via this context A menu you can show hide and move table columns The following columns are available for the overview table Columns Description Status The symbol for the current tank status is shown on the display See also the Icons for tanks chapter Status display section Location Indicates the tank location The location is the name of the location The name is selected in the Configuration menu in menu item Tank field Location The location is specified in the Location menu item Tank name Indicates the tank name The field can also be displayed for existing secondary values m Primary value The tank name for the primary value is entered in the Tank name field Path Configuration gt Tank Tank details Tank name Secondary value The tank names for the secondary values are entered in the Configuration menu Tank menu item Secondaries tab Name field Level The current level is indicated as a symbol and a percentage Value Displays the last valid primary value The field can also be displayed for existing secondary values The Value field indicates the last valid measured value m For aggregated tanks the sum of the valid measured values for the ass
218. roup EU Operations Product All Supplier All StateS Tank name gt Location gt Product Level gt Value Free Capacity Unit Time stamp Time zone Product I 11 18 14 12 iy IC 03 mix HQ PET 6000 0 34000 0 40000 01 A i cerapeltiedtia 030 PM O 1co3000 HQ a 3000 0 17000 0 20000 01 m a 030 PM e 11 18 11 12 00 D amp cvaste EU Operations UK Waste IC 011 90 a 3000 0 27000 0 30000 01 sind Europe Berlin 41 18 11 12 00 3 IC Waste II EU Operations PL Waste IC 011 90 E 3000 0 27000 0 30000 01 ale Europe Berlin 11 18 11 12 00 y IC Waste Ill EU Operations ES Waste IC 011 90 m 3000 0 27000 0 30000 0 Europe Berlin 5 2 ofs v 3 6 3 Changing the column display fields in the overview table Pressing the button PM A in the table header in the overview opens a context menu Via this context menu you can show and hide columns or change the column order PD Amour O O Flows Se Cancel 3 6 4 Viewing numerical values master data Numerical values above 1000 are displayed with a thousand separator This is only the case within the Workplace menu however Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 3 User interface Workplace gt gt Tank El Refresh view Hide details Unit lv Time zone Location _ Tank group AIl Product Al Supplier All v Location All ha StateS Tankname gt Value Unit TimeunitS Timezone Capacity Level Location Free Product
219. roupTempPrintPreviewPath Directory for local temporary storage of Print report as PDF files Factory setting m SupplyCarelnstallDirMdatareportsipreviewA schedular alarm delete open Switch allowing open alarms to also be deleted via the GarbageCollectorJob Selection m true or false Factory setting m false scheduler alarm retention time Time in days during which alarms which are not open are retained in the database User entry m to 2147483647 integer Factory setting 10 scheduler default retries Indicates how often a failed job is restarted if no other value is set for the job User entry m to 2147483647 integer Factory setting 150 scheduler default retryIntervall Indicates the interval after which a failed job is restarted if no other value is set for the job User entry m to 2147483647 integer Factory setting m 600000 ms schedular job ReportGenerator ConnectionTimeoutMillis Connection timeout period for sending of HTTP reports Factory setting 5000 ms scheduler measurement retention time Time in days during which old measured values are retained in the database Older measured values and also older dates for disposals and deliveries are deleted User entry m to 2147483647 integer Factory setting 90 scheduler scan tolerance Time specified in ms A scheduled gateway query may be delayed for this period of time If the time
220. rt the process 11 8 2 Managing customer specific units Notice Wee Only people whose user role is configured as System administrator or Local system administrator with the additional role of Master data can create customer specific units Customer specific units are used for display purposes only and are not translated or converted In the Customer specific unit tab you can create and delete customer specific units Customer specific units are automatically assigned to the Customer specific unit type The button in the table header opens a context menu Via this context menu you can show and hide the Unit type column in the overview table Customer specific units can be assigned in SupplyCare at the following points m Configuration gt Unit gt Details tab m System administration gt Gateway configuration gt Measuring point details gt Engineering unit for application field Configuration gt Tank Tank details tab Unit field 1 Click the Configuration menu in the Navigation window 2 Click the Unit menu item 3 Select the Customer specific unit tab 4 The following view is displayed in the Application window Configuration gt gt Unit El zp Unit Description Decimal places 2 Unit type percent 1 Relative A ampere 1 Electricity Ah ampere hour 1 Customer specific non convertible non translatable atm atmosphere 1 Pressure bar bar 1 Pressure 3 of sde O uni
221. s User entry Any valid path name Factory setting m SupplyCarelInstallDir data newGateways cm telefon dipatcherIntervall Interval in ms in which the system checks whether a telephone connection has to be worked through Input range m to 9223372036854775807 whole numbers useful values 100 to 1000 Factory setting 500 cm telefon phoneBook 1 Windows telephone book entry which can be used This parameter is needed for the Phone communication version User entry m Text e g GW Connection 1 cm telefon phoneBook 2 Windows telephone book entry which can be used needed for connecting by phone User entry m Text e g GW Connection 2 cm telefon phoneBook 3 Windows telephone book entry which can be used This parameter is needed for the Phone communication version User entry m Text e g GW Connection 3 cm telefon phoneBook 4 Windows telephone book entry which can be used This parameter is needed for the Phone communication version User entry m Text e g GW Connection 4 cm telefon phoneBook 5 Windows telephone book entry which can be used This parameter is needed for the Phone communication version User entry m Text e g GW Connection 5 cm telefon dispatch remote root Local path on the SupplyCare telephone server to the main sender directory cm telefon dispatch root Main directory for all telephone folders Factory setting m SupplyCarelInstallDir data tele
222. s a file MS Excel CSV is available as the Format 7 Activate the check box Export selected tank only if you only want to download the data from the selected tank Deactivate the check box if you want to download the data from all of the tanks shown in the table 8 Activate the check box Include secondary values if you also want to download the secondary values This information is only relevant when downloading the data as an Excel file 9 Activate the check box Include scaled values if you also want to download the scaled values 10 Via the field Readings max specify the maximum number of primary values per tank 11 Click the ae buttons to display the measured value history in a diagram If the selected tank is out of service only the historic pattern of the inventory is displayed The expected pattern for the inventory is not displayed 12 Click the 15 button to download the measured values as an Excel spreadsheet 43 3 User interface CSV file 44 The CSV file has the following structure SupplyCare Enterprise SCE30B v e E E E x g 2 e J le le Fe gbg SF E s 5 lO E 1562 JS m a gg TANK_01 1 13 10 6 40 AM 1 76 0 0 0 0 1 7 0 3 0 1 TANK_01 11 13 10 6 49 AM 5 0 0 0 0 1 7 0 3 0 2 TANK_01 1 13 10 6 58 AM 1 0 0 0 0 1 7 0 3 0 3 TANK_01 1 13 10 7 07 AM 28 20 0 0 0 0 1 7 0
223. s been fulfilled If a delivery and disposal is made this is flagged by SupplyCare as Delivery made detected Disposal made detected If the system has detected a missing delivery disposal or missing measured data you can process this delivery disposal in the Details tab using the Mark as fulfilled button The delivery disposal is displayed as Delivery fulfilled confirmed Disposal fulfilled confirmed 3 4 8 Icons for analysis Button Meaning Tank Object Standard tank Standard object how astandard tank standard object is indicated in the Analysis menu item Aggregated standard tanks Aggregated standard objects how aggregated standard tanks aggregated standard objects are indicated in the Analysis menu item i Recycling tank Recycling object how a recycling tank recycling object is tat te a iin ap indicated in the Analysis menu item a En Aggregated recycling tanks Aggregated recycling objects how aggregated A A i e i an recycling tanks aggregated recycling objects are indicated in the Analysis menu item 23 3 User interface 24 3 5 Descriptions SupplyCare Enterprise SCE30B Depending on whether Tank or Object was selected as the template type the descriptions in the menu in Overview and in Detailed view change as well as the symbols and tool tips that appear when you move the cursor over a symbol The following are the differences in
224. s displayed in the Application window Plan delivery f disposal Planned delivery f disposal Time zone UTC 01 00 unit ii Last Month March 2012 Mext Month B The current date is displayed with a grey background in the calender Every date in the future has a color background The color indicates the forecast value for the tank status for that particular date Endress Hauser 63 5 Viewing personalized tank view My tank view workplace SupplyCare Enterprise SCE30B 64 Color Standard tanks Recycling tanks Grey Current date Current date E Green Ok Ok The forecast value is larger than the plan point The forecast value is between O and the plan point Yellow Plan point Plan point The forecast value is between the plan point and The forecast value is between the plan point and the ship point the safety stock A Orange Ship point Not applicable The forecast value is between the ship point and the safety stock Red Safety stock Safety stock The forecast value is below the safety stock The forecast value is above the safety stock White The date is in the past or the tank aggregated The date is in the past or the tank aggregated tank is out of service tank is out of service Click the PP ution to display the legend You can move the legend to another location by pointing the cursor at the blue title ba
225. s in the text box Click HE to abort the process 23 Click El to save your entries in the PDL PDE notification tab Click E to abort the process 12 7 Set up an e mail connection Notice Only people whose user role is configured as System administrator can set up e mail connections You can use this menu item to set up the e mail connection for incoming and outgoing e mails under SupplyCare The Outgoing e mail connection is used to send events by mail to the user in question The Incoming e mail connection is used to collect e mails from the gateways 1 Click the System administration menu in the Navigation window 2 Click the E mail connection menu item 3 The following view is displayed in the Application window Outgoing Incoming Fi Test E mail server localhost IP address or host name of the e mail server to send e mails to E mail server port 25 normaly port 25 E mail address of sender SuppliyCareficompany com E mail address of this program e g SupphCareEnterprise company com User name User name for SMTP authentication Passwor d Password for SMTP authentication eae Leave user name and password empty if SMTP authentication is not used Admin e mail admin blocalhost de E mail address of administrator e g adming icompany com 4 Select the Outgoing tab Here you configure the e mail connection to an e mail server for outgoing e mails from SupplyCare S Click the button 6 The Outgoing
226. s of the individual tanks on Google Maps The tanks can be filtered by tank group product supplier and location You can call up detailed information on every tank such as value plan delivery or disposal 10 1 Viewing a map and associated information Notice The following conditions must be met to display a tank or an aggregated tank on the map The tank or aggregated tank must be assigned to a specific location The user must have the geographical coordinates degree latitude and longitude of the location see Page 104 m The tank or aggregated tank must be assigned to a tank group 1 Click the Workplace menu in the Navigation window 2 Click the Map menu item A map with an overview of the tank locations is displayed Tank group Product Supplier Location Map Satelite ERE Finland J y 1 5 ee a ex f Russia ion Gr wx te SAS Ma Sa IN 4 a Da C Kazakhstan E 3 S e 7 E 7 SN Le Mongolia pa wK A wX ral M 5 na Ls oy Sout Oc 7 rd ZA ate JO Jle j Map data 82011 Geocentre Consulting MapLink Tele Atlas Terms of Use nn The map view is automatically adapted to the filter criteria so that you see all the tanks for the locations in question If no tanks are found for the filter criteria the message No tanks found is displayed The filter criteria are reset to the values previously used Endress Haus
227. s whether the database backup is active or inactive With the button the backup is started immediately 8 Click El to save your entries Click to abort the process Reimporting the database backup 1 End the SupplyCareEnterprise service under Control Panel Administrative Tools Services 2 Delete or back up the supplycare folder in the SupplyCarelnstallDir data database directory 3 Unpack the zip file of the database backup SUPPLYCARE DB _BACKUP_n zip Endress Hauser 133 12 System administration 134 SupplyCare Enterprise SCE30B 4 Copy the supplycare folder from the database backup to the SupplyCareInstallDir data database directory Start the SupplyCareEnterprise service Start the SupplyCare Enterprise SCE30B application The login window appears a a Enter your Login Name user name and your password 12 4 Configuring the splash screen and information window UI Customizing Notice m Only people whose role is configured as System administrator or Local system administrator can configure splash screen information window navigation window header image and login image m The graphic formats jpg png gif and bmp are supported m You can enter a maximum of 50 characters per text box 1 In the Navigation window click the System administration menu Click the System Properties menu item 2 3 Select the UI Customizing tab 4 The following view is displayed in the Application wi
228. sposal date and time 10433 8 30 03 2011 12 Amount Range 10433 8 38 0 day s Comment 10 Click the button 11 The dialog box appears in the editing mode 12 You can view and enter the following data here Value Displays the projected level Delivery date and time The day selected in the calendar is used for the date The time is predefined Amount Enter the planned amount Range This field shows the number of days before the safety stock is reached for the amount entered In the case of standard tanks the number of days is calculated from the Average daily outflow value In the case of recycling tanks the number of days is calculated from the Average daily inflow value Refresh range Via the rey button the Range field is updated for the amount entered Comment Enter a comment or note 13 Click E to save your changes Click to abort the process The system performs a plausibility check when a planned disposal or planned delivery is saved If the values entered are implausible a dialog box is displayed gt See the Plausibility check section below 14 Deliveries and disposals are entered in the calendar with a delivery van icon and the planned amount The delivery date and time are displayed when you move the cursor over this field 7 3 2 Plausibility check Notice m The plausibility check only checks the latest planned delivery disposal m A plausibility check is only perfo
229. ssioning and operation Notice A PC connected to the Internet or Intranet is needed to use SupplyCare Enterprise software To install the SupplyCare Enterprise software insert the CD ROM into the CD ROM drive of your PG Follow the setup instructions in manual BA000545 00 A2 16 14 Getting Started Schnelleinstieg 1 4 Technical improvement Endress Hauser reserves the right to make technical improvements to the hardware and software without prior notice Such improvements are not documented if they do not affect the operating functions of the software A new version of the Operating Instructions is always created if the improvement affects operation See the change history in this manual 1 5 Conventions used in this manual Typographical emphasis and particular symbols have been used to provide a clear structure for this manual and highlight important information Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 1 5 1 Emphasizing text The following table provides you with a brief overview of conventions used to highlight and emphasize text in this manual Text emphasis Meaning 1 Safety instructions Example Bold Keyboard entry button tab menu instruction directory path commands 1 6 This document Notice Select the Event details tab Click the Event menu item The screen views illustrated in this manual are sample views and can deviate from the views you see on your screen
230. surepoint lt status errorlwarning gt While executing the Eliminate measuring point error CheckGatewayDeviceMeasurepointState service a measuring point with the status nicht in Ordnung was found 12001 Check Tanks failed lt ErrorMessage gt Unexpected error while executing the CheckTanks For further information see service lt ErrorMessage gt information 12201 GarbageCollector failed lt ErrorMessage gt Unexpected error while executing the For further information see GarbageCollector service lt ErrorMessage gt information 12301 ReportGenerator failed lt ErrorMessage gt Unexpected error while executing the For further information see ReportGenerator service lt ErrorMessage gt information 12401 Resubmission Job failed lt ErrorMessage gt Unexpected error while executing the Resubmission For further information see service lt ErrorMessage gt information 12501 Forecast calculation Job failed Unexpected error while executing the Forecast For further information see lt ErrorMessage gt calculation service lt ErrorMessage gt information 12601 Replenishment event Job failed Unexpected error while executing the Replenishment For further information see lt ErrorMessage gt event service lt ErrorMessage gt information 20101 Unable to send an E Mail E mails are not being sent correctly In the E mail connection outgoing menu check if the e mail server is set up correctly Check
231. t Ah Description ampere hour Click the _ button The tab is displayed in the edit mode Enter the customer specific unit in the Unit field Enter a description in the Description field A A Click E to save your entries Click 4 to abort the process Endress Hauser 115 11 Managing master data SupplyCare Enterprise SCE30B 11 8 3 Deleting a customer specific unit you can delete a customer specific unit if the button is displayed in the Customer specific unit tab The customer specific unit must meet the following requirements before you can delete the unit t must be a customer specific unit m The unit is not assigned to any tank as a unit m The unit is not assigned to any measuring point Measuring point details tab Engineering unit for application field 1 Click the Configuration menu in the Navigation window Click the Unit menu item Select the Customer specific unit tab In the overview table select the customer specific unit you wish to delete Click the 1 button The prompt Do you really want to delete is displayed O e O A Click OK to delete the entry Click Cancel to abort the process 11 9 Managing a report Notice m Only people whose user role is configured as Master Data can set up change or delete reports m To use automatic data exchange in CIDX format a server to receive the files must be set up on the receiver side The URL user name and password of the receiver
232. tab is displayed in the edit mode Outgoing Incoming E x E mail server localhost IP address or host name of the e mail server to send e mails to E mail server port 25 normaly port 25 E mail address of sender SupphCareiicompany com E mail address of this program e g SupphyCareEnterprizem company com User name User name for SMTP authentication Password Password for SMTP authentication o A Leave user name and password empty if SMTP authentication iz not used Admin e mail adming localhost de E mail address of administrator e g adminffcompany com 7 Here enter the corresponding data for the e mail connection for the outgoing e mails such as E Mail Server obligatory E Mail Server Port obligatory E Mail address of sender obligatory 145 12 System administration 146 SupplyCare Enterprise SCE30B User Name Password Admin E Mail obligatory Alarm messages are sent to this e mail address Refer also to Page 167 8 Click E to save your entries Click 4 to abort the process 9 Select the Incoming tab Here you configure the e mail connection to an e mail server from which the gateway e mails are collected 10 Click the 34 button 11 The Incoming tab is displayed in the edit mode Outgoing Ox IP address or host name of the e mail server l a a from which the gateway e maile shall be retrieved from User name User name of the gateway e mail account of t
233. tank settings The settings can be changed subsequently via the tabs mentioned above Notice m A tank always has to be assigned to a tank group since you can only assign tank groups to a user m The Location Buyer Supplier and Product first have to be created before you can select elements for these fields The Buyer and Supplier are created as a Company see Page 81 a Creating a tank using the Tank setup wizard 1 Click the Configuration menu in the Navigation window 2 Click the Tank menu item 3 The detail view is displayed in the Application window 4 Click the Tank setup wizard button Notice The Tank wizard cannot be used to create aggregated tanks Endress Hauser SupplyCare Enterprise SCE30B 5 11 Managing master data The dialog window Step 1 out of 2 Basic tank settings is displayed tep 1 out of 2 Basic tank AMAS 1 out of 2 Basic tank settings E Endress Hauser Mandatory tank configuration Tank name Capacity Tank type Standard tank Recycling tank Select the tank groups O T Assign Name Description gt E All Tanks a APAC Operations E EU Operations O US Operations 2 2 ot4 v Back Next Cancel Finish Enter the following data Tank name mandatory Capacity mandatory Tank type see Page 90 By activating the checkbox in the Assign column assign the tank to a tank group that already exists or create a new tank group if applicab
234. ted automatically These fields are recomputed if you change the date 6 You can update the range enter a comment and save or reject the changes for the amount entered See Page 64 80 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data 11 Managing master data 11 1 Managing companies Notice Only people whose user role is configured as Master Data can create change and delete companies 11 1 1 1 Click the Configuration menu in the Navigation window Creating a company 2 Click the Company menu item 3 The following detail view is displayed in the Application window Configuration gt gt Company El Name City Description gt Buyer AG Basel Buyer Chemiicals Endress Hauser Reinach Mustermann AG Bazel Supplier AG Basel Supplier Chemicals BES iotr E Company details details Ue Name Buyer AG l Street Nebenstrasse 455 Description Contact city Basel Buyer Chemiicals Identifier 12345678 Zip code 4113 Identifier agency AzzignedByBuyer State Country Switzerland 4 Click the k button on the Company details tab 5 The tab is displayed in the edit mode Company details details E x Name Street Description Contact city Identifier Zip code Identifier agency Other State Country 81 11 Managing master data 82 SupplyCare Enterprise SCE30B 6 Here you can enter company data such as
235. tem see Page 146 m For e mail server querying to take place the Enabled check box must be enabled under the E mail connection incoming menu item The e mail server is queried at regular intervals in minutes Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration 1 In the Navigation window click the System administration menu 2 Click the New gateways menu item 3 The following is displayed in the Application window System administration gt gt Hew gateways El Insert selected gateways Delete selected gateways Select Names Unique IDS Tag Description 2 Type gt O GATEWAY MEW 1 64005801 040 GATEWAY MEW 1 FeASZO Bee oto 4 A table with the following columns is displayed in the upper section of the Application window Name is assigned automatically in the application Unique ID e g serial number of the gateway Tag is assigned automatically in the application Description e g location Type type of gateway Notice m The name can be either a Unique ID a tag or a combination of both People whose user role is configured as System administrator can make the settings for this in the System settings menu item System properties tab cm newGateway name parameter see Page 125 m Open the context menu in the table header via the button This context menu allows you to display and hide the following additional columns in the Applica
236. ter the decimal point for the units In the Unit menu item you specify the number of places after the decimal point for the various units Notice The Unit menu item lists all the units along with their description number of decimal places and unit type Customer specific types of units cannot be converted to another unit Customer specific units are for display purposes only The button in the table header opens a context menu Via this context menu you can show and hide the Unit type column in the overview table 1 Click the Configuration menu in the Navigation window 2 Click the Units menu item 3 The following detail view appears in the application window I 2 Unit Description Decimal places 2 Unit type percent 1 Relative A ampere 1 Electricity Ah ampere hour 1 Customer specific non convertible non tran latable atm atmosphere 1 Pressure bar bar 1 Pressure ot5sa y EA gt E Unit El Decimal places 1 The table displays all units along with their description and number of places after the decimal point 4 Select the unit in the table for which you want to change the number of places after the decimal point 5 Click the 28 button Endress Hauser SupplyCare Enterprise SCE30B 11 Managing master data 6 The tab is displayed in edit mode in the lower part of the window 7 Enter the desired number in the Decimal places field 8 Click El to save your entries Click to abo
237. ter the interval in seconds The Start time fields are used to specify when the service is started for the first time The corresponding service is started immediately e g for test purposes with the 3 button 8 Click El to save your entries Click 4 to abort the process 12 3 Configuring database backup Notice Mejia Only people whose user role is configured as System administrator can configure the database backup 1 Click the System administration menu in the Navigation window 2 Click the System properties menu item 3 Click the Database backup tab 4 The following detail view is displayed in the Application window System properties Basic jobs Database backup Ul Customizing Database backup location CiProgramiSupplyCareiBackup Database backup interval T day s Start date 10 09 2010 Hours 17 Minutes 0 State enabled Time zone UTC 00 00 ie 5 Click the 7 button 6 The tab is displayed in the edit mode 7 The specifications of the database backup can be entered here Database backup location obligatory storage location for data backup The name of the zip file with the database backup is SUPPLYCARE_DB_BACKUP_n n 0 1 etc Database backup interval obligatory storage interval in days for the backup Start date obligatory day and time of first backup Any subsequent backups are saved at the specified time following the specified interval State indicate
238. teway configuration menu item for the HTTP communication version User entry m A text e g proxyUserName workplace secondary default Select whether or not the secondary values for Workplace Tank are to be shown in addition to the primary value as standard Selection m hide or show Factory setting m hide 12 2 Configuring services basic jobs Notice Only people with System administrator configured as their user role can configure services running in the background basic jobs 1 In the Navigation window click the System administration menu 2 Click the System Properties menu item 3 Click the Basic Jobs tab A The following view is displayed in the Application window System properties Contract properties Basic jobs Ul Customizing Modules Es Enabled Interval Start time Run job Hours Minutes once Dicc HTTP connections have been F eae o ir 2 Check all events for resubmission E 300 s 11 10 395 Check all measurements for errors z 26400 0 0 EG Run garbage collector job m daily 13 25 EO l Check number of incoming measure values 7 1h 1 0 Calculation of forecast data read only E daily 4 145 Time zone UTC 01 00 S Click the 7 button 6 The tab is displayed in the edit mode 7 The time interval for the following services can be changed here Check if all HTTP connections have been performed interval after which the system checks whether the gateway scans
239. the Devices panel to generate the desired number of devices Devices Add Remove Remove all Refresh ad Manufacturer Description Mode Connection device2 device2 devices device3 device3 191 15 OPC Connection 192 SupplyCare Enterprise SCE30B 13 Check the Edit checkbox on the Devices panel to enter the UniquelD Tag Manufacturer and Description Leave the Model and Connection fields blank The Name is automatically set by the program and cannot be edited Devices Add Remove Remove all Refresh UniquelD aq Manufacturer Description Model Connection device device Endress H device Test device 1 device2 device E Endress H device Best device 2 m device3 device3 E eEndress HY device3 m z device2 14 Uncheck the Edit checkbox on the Devices panel to leave the edit mode 15 Select the first device and click the Add button on the Measure Points panel 16 Select the desired OPC Items and click the Open button x Path _4_ 20ma 1 fea Filter T writable Data type EMPTY Readable Cancel 17 The following window is displayed scOpcConfigurator E ES E on Close New Save as Connect Gateway BB edit OPC Server Language Disconnect Parameter Value j OPC Server Name Endress Hauser Fieldgate OPC Start time 27 01 2009 09 12 11 UniquelD gatewayD001 Running state running Update time 27 01
240. the Subject Custom field enter the number of the variable from the legend along with the curly brackets and individual text if needed You can enter multiple variables e g Event notification Freeze event notification Limit notification POLPDE notification E Subject Subject Default Delivery disposal state message Tank name Location e Subject Custom POL PDE notification 1 2 43 187 Body POL PDE Language 143 12 System administration 144 SupplyCare Enterprise SCE30B 10 Click the button to close the Available variables legend 11 Select the desired PDL PDE from the PDL PDE picklist 12 The Language picklist can be edited as soon as the PDL PDE has been selected 13 Select the desired language from the Language picklist 14 The standard text template appears as soon as the language has been selected Freeze event notification Limit notification PDL PDE notification Event notification E x Subject Default Delwery disposal state message Tank name Location ie Subject Custom PDLIPDE notification 1 2 4 48 ca Body PDL PDE Missed delivery Language EN di Show preview E Dear 0 1 Following planned delivery for the tank silo 2 at 3 4 Delivery date and time 5 Amount 6 7 Product 3 Comment 9 15 Click the button above the text box if you want to change the text in the box The text box appears in the editing mode
241. the descriptions that involve more than simply replacing the word Tank with Object Standard template type Tank Standard template type Object Tank name Object Tank details Details Tank partners Partners Tank service status Service status PP Plan point OL Observance limit SP Ship point POA Point of action SST Safety stock CL Critical limit DSST Day s until reaching saftey stock DCL Day s until reaching critical limit Capacity Maximum Free capacity Free space Inventory Chart Chart Inventory Received value Outflow Decrease Inflow Increase DO Daily outflow DD Daily decrease ADO Average daily outflow ADD Average daily decrease DI Daily inflow DI Daily increase ADI Average daily inflow ADI Average daily increase Average inventory level Average level Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 3 User interface 3 6 General processing functions 3 6 1 You can use the filter function to reduce the number of data sets displayed for a table You enter the filter functions in the top line of the table orkplace gt gt Tank El Show secondary data Unit Using filter functions in tables searching Time zone Location ink group All Product All Supplier All Location All ite gt Tankname gt Value gt Unit Timeunit gt Time zone Capacity
242. the file or save it 3 Click OK to open or save the file Click Cancel to abort the process 4 1 5 Tank partners Information on the buyer and supplier is displayed in this tab If no buyer supplier is currently assigned to the selected tank this tab is not visible Inventory chart Tank details Notes and files Tank partners Location details Tank service status Event details Download history Buyer Supplier Company Mustermann AG Endress Hauser Street Hauptstrasse 144 Kaegenstrasse 2 city Bazel Reinach Zip code 4416 4153 State Country CH Switzerland Identifier 676767 787878 Identifier agency AzsignedBwyPapihet AzsignedBwyPapilet Notice The tank partner buyer and supplier are assigned to the tank via the Configuration menu in the Tank menu item Tank details tab see Page 86 4 1 6 Location details Information on the tank location is displayed in this tab Inventory chart Tank details Notes and files Tank partners Location details Tank service status Event details Download history Location Manager Company Mustermann AG Name Street Kagenstrasse 2 First name City Reinach E mail Zip code 4153 Fax State Mobile Country CH Phone Name Location 1 Building 1 2 3 Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 4 1 7 Tank service status Information on the tank service is displayed in this tab Tank details Notes and files Location details
243. the gateway e mail in kilobyte that can be processed by SupplyCare Factory setting 1000 cm mail password Password for the e mail account to retrieve the gateway e mails from the server This parameter corresponds to the Password field in the Outgoing tab in the E mail connection menu item in the System administration menu User entry m Text e g sce Factory setting empty cm mail timeout Timeout period for establishing connection to POP3 server Factory setting 30 minutes cm mail user User name for the e mail account to retrieve the gateway e mails from the server This parameter corresponds to the User name field in the Outgoing tab in the E mail connection menu item in the System administration menu User entry m Text e g sce cm newGateway name Determines what part and what element is used for the name of a new gateway Possible values are Tag the name is formed from the tag of the gateway ID the name is formed from the unique ID of the gateway Combined the name is a combination of the tag and unique ID User entry Tag ID Combined Factory setting m id Endress Hauser SupplyCare Enterprise SCE30B Key 12 System administration Description cm newGateway store Directory in which messages from new gateways are stored The directories are created where necessary provided sufficient authorization is available to create directorie
244. the report 13 Click the Next button to go to the channel configuration The Channel configuration dialog box is displayed Step 5 out of 6 Channel configuration Select and configure the delivery channel channet cel Finish 14 Select the distribution channel for the Channel field Endress Hauser 119 11 Managing master data SupplyCare Enterprise SCE30B 15 Depending on the distribution channel selected additional fields are displayed in the tab a Distributed by Directory Step 5 out of 6 Channel configuration Select and configure the delivery channel Channel Directory Directory Enter the path which is accessible for SupplyCare and where you want to save the report b Distributed by HTTP Step 5 out of 6 Channel configuration Select and configure the delivery channel Channel HTTP URL User name Password Use proxy Enter the following data here URL obligatory website of the selected channel User name Password Use proxy c Distributed by e mail Click the El button to select a user Click the button to remove a user who has been selected 120 Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 11 Managing master data Step 5 out of 6 Channel configuration Select and configure the delivery channel Channel E mail E mail d Distributed by FTP Step 5 out of 6 Channel configuration Select
245. the tank events which the user should be informed about 1 Click the Configuration menu in the Navigation window Click the Tank group menu item 2 3 Select the User assignment tab 4 Click the 4 button 111 11 Managing master data SupplyCare Enterprise SCE30B 5 The tab is displayed in the edit mode Tank assignment User assignment E x E Assign 2 Firstname lt Name lt By e mail PP SP 55T TF PDL PDE wf Claude Fischer 7 Customer Support E H Martina Meister BBE of 6 Activating the check box in the Assign column assigns a user to the tank group Deactivate the check box to undo the assignment The assigned tank groups are listed in the Workplace Tank view 7 Activate the By E Mail check box if you want the user to also be informed about tank events by e mail The e mail connection must be set up for SupplyCare before the user can be notified by mail see Page 145 8 Enable the check boxes corresponding to the events for which the user should receive notification PP plan point SP ship point SST safety stock TF OF Tank freeze object freeze comprises all the information regarding tank freeze object freeze events PDL planned delivery disposal loop comprises all the new deliveries disposals which have been planned or deleted PDE planned delivery disposal events comprises all the early late missed and completed deliveries disposals 9 Click t
246. tion menu in the Navigation window 2 Click the Tank menu item Endress Hauser SupplyCare Enterprise SCE30B 3 User interface 3 The following detail view is displayed in the Application window Configuration gt gt Tank Product All Buyer All Supplier All Location gt Capacity gt Product Notes Unit IC 02000 US Operations West 100 Product IC 020 Tank soll regelm ig alle 3 To Ic 03000 Ho Product IC 030 Ic 04000 CA Operations 320000 Product IC 040 gal IC Waste EU Operations UK Waste IC 011 Material Safety Instruction EEL ordei Secondaries Tank freeze Tank groups Tank notes k m Er dh Tank setup wizard Tank name Ic 01000 a Capacity Location US Operations North o Optimum 15500 Buyer Buyer AG Plan point 12000 SDT 2 Days l Safety stock 5000 Product Product IC 010 epa a E Use product unit T Unit Tank type Standard tank Recycling tank ADVADO based on 14 Days Include negative values Activate forecast O 4 In the overview table click the tank you want to delete 5 The related tab is displayed in the lower section of the Application window Secondaries Tank freeze Tank groups Tank notes O iui Er dh Tank setup wizard Tank name Ic 02000 a Capacity 100 Location US Operations West Optimum Buyer Buyer AG Plan point 50 Supplier Supplier AG Ship point sor 2 fae Safety stock 35 Product Prod
247. tion window and generally change the order of the columns Number Indicates the number of e mails which have been sent by a gateway to SupplyCare since the first e mail was received Time stamp received Contains the time stamp of the last e mail received by SupplyCare with the time converted to the time zone which was selected in the Profile menu User preferences menu item Time zone field Time stamp XML Contains the time stamp that was included in the XML of the last e mail received by SupplyCare with the time converted to the time zone which was selected in the Profile menu User preferences menu item Time zone field 5 In the Selection column enable the check box for the gateway that you wish to include in the Gateway configuration menu item 6 Click the button Include all selected gateways to include these in the Gateway configuration menu item Notice Using the Delete selected gateways button you can delete from the list the gateways selected in the Selection column 173 12 System administration SupplyCare Enterprise SCE30B 12 16 Writing and sending messages messaging Notice Mojo Only people whose user role is configured as Technical system administrator or Local system administrator can write and send notification messages Users with the Technical system administrator or Local system administrator user role can send to all SupplyCare users a message A message from the system administrator
248. tionality However depending on your selection the descriptions in the menu in Overview and in Detailed view change as well as the symbols and tool tips that appear when you move the cursor over a symbol Notice The symbols for tanks and objects are shown in the following tables The descriptions that are different are listed after this in Chapter 3 5 on Page 24 Please note that the template type Tank is used in all remaining sections of these Operating Instructions Button Tank Object Meaning OK GREEN Standard tank Standard object the current last measured inventory level of the tank object in question is above the plan point observance limit Recycling tank Recycling object the current last measured inventory level of the tank object in question is below the plan point observance limit OK GREEN Aggregated standard tanks Aggregated standard objects the current last measured inventory level of the aggregated tank aggregated object in question is above the plan point observance limit Aggregated recycling tanks Aggregated recycling objects the current last measured inventory level of the aggregated tank aggregated object in question is below the plan point observance limit Plan point Observance limit reached YELLOW Standard tank Standard object the current last measured inventory level of the tank object in question is below the plan point observance limit Recycling tank Recycl
249. ton The tab is displayed in the edit mode SP a A Tank notes Tank groups Tank detaile Secondaries Tank freeze E x Assign Name Description 2 All Tanks US Operations Fj APAC Operations Fi EU Operations Bee of 7 Activating the check box in the Assign column assigns the tank to a tank group Deactivate the check box to undo the assignment 8 Click El to save your entries Click to abort the process 11 3 4 Configuring secondaries If secondary values have been assigned to the tank via the Gateway configuration menu item in the Assign measuring point to tank tab these secondary values are displayed in the Secondaries tab 1 Click the Configuration menu in the Navigation window 2 Click the Tank menu item 3 In the lower section of the application window select the Secondaries tab i ay 4 Click the button fl 5 The tab is displayed in the edit mode Tank details Secondaries Tank freeze Tank groups Tank notes 2 Secondary 1 Secondary 2 Secondary 3 lame Temperatur Name Druck Name 0034 Limit 4 20 Limit 4 970 Limit 4 6 Limit 2 15 Limit 2 950 Limit 2 4 Hysteresis 2 Hysteresis 0 Hysteresis 0 Unit Cc Unit mbar Unit yd lupswing Y lupswing Y Jupswing P Secondary 4 Secondary 5 Name 0035 Name 0036 Limit 4 5000 Limit 4 5 Limit 2 4000 Limit 2 3 Hysteresis 0 Hysteresis 0 Unit Unit t upswing 7 upswing P 93 11 Managing master data 9
250. tus Comment add a comment 8 Click EJ to save your entries Click to abort the process 9 You can view the history for an alarm by means of the Alarm history tab The time stamp status message comment and the user who edited the alarm are displayed here 168 Endress Hauser SupplyCare Enterprise SCE30B 12 12 1 Table of alarm messages 12 System administration Message Alarm Description Measures number 11101 Folder Scanner failed lt ErrorMessage gt Unexpected error while executing the FolderScanner For further information see service lt ErrorMessage gt information 11102 Folder Scanner failed Gateway not found Error while executing the FolderScanner service Check whether the gateway exists in the lt Message gt During a gateway query the gateway data were not application loaded correctly from the database 11103 Folder Scanner failed Folder not found Error while executing the FolderScanner service The Check the settings of the parameters keys lt Message gt New gateway directory could not be found during the cm newGateway name and procedure cm newGateway store in the System Properties menu 11151 Folder Scanner failed Gateway changed Error while executing the FolderScanner service The Replace gateway gateway has been replaced The gateway type or the Reset gateway unique ID via GUI gateway unique ID have change
251. ty for the period entered To ensure that fluctuating changes in the level do not falsify the result the value entered for the Hysteresis field is factored into the calculation Turnover rate Displays the turnover rate for the period entered m Calculation for standard tanks Total outflow Average inventory level m Calculation for recycling tanks Total inflow Average inventory level Average rate of usage Displays the average rate of usage for the period entered m Calculation for standard tanks Average inventory level Optimum 100 If Optimum has been disabled or if the value is 0 the system calculates with the capacity entered m Calculation for recycling tanks Average inventory level Safety stock 100 If Safety stock has been disabled the system calculates with the capacity entered Maximum value Maximum value for the period entered Minimum value Minimum value for the period entered Safety stock reached Number of times the safety stock has been undershot in the case of standard tanks and exceeded in the case of recycling tanks for the period entered m Valuation for standard tanks Measured value lt value entered for safety stock Calculation for recycling tanks Measured value gt value entered for safety stock m All measured values within the set hysteresis are not counted see Page 91 m If Safety stock has been disabled the Safety stock reached field is empty m
252. uct IC 020 ia p Use product unit unit A Tank type Standard tank Recycling tank ADVADO based on 14 Days Include negative values Activate forecast O 6 Click WW to delete the tank 7 The prompt Do you really want to delete is displayed 8 Click OK to delete the tank Click Cancel to abort the process 3 6 9 Copying and changing a data record Depending on your user role you can copy a data record in the following menu items User Tank Aggregated tank Location Company Product Tank group and Report Data fields that belong specifically to the data record are not copied These fields remain empty in the copied data record If the function is available the following button EE is displayed Endress Hauser 31 3 User interface 32 SupplyCare Enterprise SCE30B The data record of a tank is copied in the following example The same procedure applies if you want to copy other data records 1 Click the Configuration menu in the Navigation window Click the Tank menu item In the overview table click the tank you want to copy O A The following detail view is displayed in the Application window Configuration gt gt Tank Product A Ae Buyer Als Supplier Tankname gt Locations Capacity Product gt Notes Unit Ic 01000 US Operations North D Product ic 010 Ic 03000 355000 Product IC 030 Ic Q CA Operations D Product ic 040 gal 400000 Waste IC 011 Material Safety Instruction
253. ue text or digits Multiline input fields to enter a long text Output fields One line output fields to display a value text or digits Multiline output fields to display a long text Tables Multicolumn tables in which individual rows can be selected Picklists These allow the user to select from specified values Check boxes These allow the user activate and deactivate certain functions 3 4 Icons 3 4 1 Standard buttons The following standard buttons are used to edit and process individual objects Button Function New creates a new object that can be saved with Save EJ Edit allows the user change the displayed contents of an object depends on role Delete deletes the content of an object A dialog box appears for the user to confirm the deletion Save saves altered contents and newly created objects Cancel undo Copy copies the data for the user tank aggregated tank location company product tank group report a disposal or a delivery Select tank picture select a tank picture for tanks and aggregated tanks in the Tank details tab Update view updates contents E Dox Oo es Calendar Button for selecting a period of time e g resubmission date start and end date for a history Excel Export button for downloading data such as measured values to an Excel spreadsheet PDF export button for downloading data suc
254. unt interval Page 125 Example Daily number of e mails 5 Tolerance before warning 4 Interval h 24 If the number of incoming e mails within 24 hours for this gateway Fieldgates is less than 1 or greater than 9 the status for this measured value is set to No measured data and the corresponding icon is set for the tank overview Tank workplace Click E to save your entries Click 4 to abort the process Endress Hauser SupplyCare Enterprise SCE30B Endress Hauser 12 System administration Notice You can assign the default values for the fields Number of e mails per interval h Tolerance before warning and Interval h for all new gateways to be created in the System properties menu see Page 152 c Communication by phone Notice m For the Telephone communication version the RAS connection must be set up The RAS connection must also be specified in the System properties menu item Parameter cm telefon see Page 125 m The integration of a modem into the Virtual Machine for using the RAS connection is not possible Gateway details Communication Scheduling B enabled Gateway access Phone FXA320 FXA52D RAS user RAS password Phone number J URL User Password Number of retries Here you specify the following data RAS user obligatory RAS password Phone number URL obligatory IP address of the selected gateway along wit
255. web based operating program for the indication and monitoring of levels of e g tanks and silos spread all over the world SupplyCare Enterprise runs by default in an Apache Tomcat environment on an application server as service under Microsoft Windows The operators and administrators operate the application via web browser from theirs desks The tank and silo inventories are regularly collected by SupplyCare Enterprise The current and previous inventory data can be indicated at any time With SupplyCare Enterprise you can create and manage master data of locations companies tanks products and users With SupplyCare Enterprise you can create Excel reports about the measured value history or provide current level and master data via CIDX Report to an ERP System as e g SAP An event management is integrated into SupplyCare Enterprise It shows events like the fall below safety stocks or plan points Additionally notification e mails can be sent to predetermined users Whenever there is a technical problem e g connection problems alarm messages are generated and alarm e mails are sent to the System administrator and Local system administrator The inventory of the tanks and silos are retrieved by level measuring devices site SupplyCare Enterprise offers the following possibilities to retrieve measured values Via HTTP Modem GSM or OPC XML connection Point of time and the interval are adjusted via a so called Scheduler which enab
256. your entries Click 4 to abort the process Select the Used in tanks tab Click the button The tab is displayed in the edit mode Product details Used in tanks E x l Assign Tank name gt Notes gt Location gt E IC 01000 US Operations North BES of l3 Activating the check box in the Assign column assigns the product to the tank The table shows the tanks which are already assigned to the product or which are not yet assigned to a product Click E to save your entries Click to abort the process 11 6 2 Changing product tank assignment iF Z 3 4 5 Click the Configuration menu in the Navigation window Click the Product menu item In the table click the product for which you want to change the assignment Select the Used in tanks tab Click the button 109 11 Managing master data SupplyCare Enterprise SCE30B 6 The tab is displayed in edit mode in the lower section of the Application window Product details Used in tanks E x l Assign Tank name gt Notes gt Location gt D Ie 01000 US Operations Morth BES of 7 Activating the check box in the Assign column assigns the selected product to a tank Deactivate the check box to undo the assignment The table shows the tanks which are already assigned to the product or which are not yet assigned to a product 8 Click El to save your entries Click E 4 to abort the process 11 6 3 Changing a product gt
Download Pdf Manuals
Related Search
Related Contents
PR0824 ALPINE RACING MANUAL - corsi OnLine, schede tecniche VAC 201011 Betriebsanleitung ProMinent® Sigma SIBa (Basistyp) SICa セットアップガイド - 製品名検索 JD745A PASTOREXTM CRYPTO PLUS 61747 60 TESTS - Bio-Rad Master 3 - Saunier Duval Hitachi CP-TW2503 data projector Manuale utente_Owner`s manual_Manuel d MONOGRAPHIE DE PRODUIT Copyright © All rights reserved.
Failed to retrieve file