AIRFOIL RIDER HEEL REST KIT - Harley
Contents
1. MOTOR HARLEY DAVIDSON WY J02180 INSTRUCTIONS REV 2013 11 01 AIRFOIL RIDER HEEL REST KIT GENERAL Kit Number 50281 01 Models For model fitment information see the P amp A retail catalog or the Parts and Accessories section of www harley davidson com English only NOTE Proper installation of this kit also requires installing a pair of Airfoil Foot Rests Part Number 50133 95 large or 50134 95 small not included in this kit Airfoil Foot Rests are available from your Harley Davidson Dealer Kit Contents See Figure 3 and Table 1 AAWARNING The rider s safety depends upon the correct installation of this kit Use the appropriate service manual procedures If the procedure is not within your capabilities or you do not have the correct tools have a Harley Davidson dealer perform the installation Improper installation of this kit could result in death or serious injury 00333a NOTE A Service Manual for your motorcycle is available at your Harley Davidson Dealer J02180 is08164 dd Rear brake lever reference only Stock foot rest Spring washer Footrest bracket ak Many Harley Davidson Parts amp Accessories are made of plastics and metals which can be recycled Figure 1 Stock Foot Rest Right Side INSTALLATION NOTE When performing the following step note the location and ori entation of the spring washer when removing each footrest 1 See F2. igure 1 On the right side of the motorcycle remove the fastener securing the footrest to the footrest bracket Save the hardware for installation NOTE On motorcycles equipped with Airfoil Foot Rests remove the adjusting screw fastening the foot rest to its footrest mount Save the foot rest and screw for heelrest installation 2 Fasten the Airfoil Rider Heel Rest mount and spring washer to the footrest bracket using the hardware saved from step 1 Tighten the fastener to 19 ft lbs 26 7 Nm 3 See Figure 2 and Figure 3 Place the right side Airfoil Rider Heel Rest on the Airfoil Rider Heel Rest mount positioning the heelrest at the desired angle 1 of 3 Please dispose of materials responsibly is08165 1 Airfoil heel rest mount rounded side up 2 Foot rest adjustment screw 3 Airfoil heel rest nut 4 Airfoil heel rest 5 Spring washer NOTE Position the Airfoil Rider Heel Rest mount with the rounded side of the mount facing upward in the footrest bracket This allows the assembly to fold upward for storage 4 Fasten the Airfoil Heel Rest to the mount using the nut provided in this kit Apply Loctite 243 blue to the large threads on the heel rest mount and tighten the nut to 100 ft lbs 135 5 Nm torque 5 Fasten the right side Airfoil Foot Rest to the Airfoil Rider Heel Rest mount using the Airfoil Foot Rest adjusting screw Tighten the adjusting screw to 29 ft lbs 39 3 Nm 6 Repeat steps 1 thr
3. ough 5 for the left side footrest assembly NOTE At any time after installation the Airfoil Foot Rest and Airfoil Rider Heel Rest can be adjusted for riding comfort Loosen the nut on the Airfoil Rider Heel Rest mount to adjust the angle of the heel rest Loosen the Airfoil Foot Rest adjusting screw to adjust the angle of the foot rest Tighten the fasteners as described above SERVICE PARTS Figure 2 Airfoil Heel and Foot Rest Installed Right Side is08166 J02180 Figure 3 Service Parts 20f3 Table 1 Service Parts Item Description Quantity Part Number Nut 2 7745 2 Heel rest 2 50283 01 3 Heel rest mount 2 50282 01 4 Rubber kit 50925 01 5 Screw 4 1627 7 Pin rubber alignment not shown 50284 01 J02180 3 of 3
Download Pdf Manuals
Related Search