Home
Operations & Service Manual
Contents
1. TEM PART NO am DESCRIPTION 1 42827 2 Door Latch 2 91476 1 ACCESS DOOR ASSY LEFT 3 40929 1 FIRE DAMPER 4 91853 FAN DUCT PANEL 5 91699 1 GUARD FIRE DAMPER 91475 1 ACCESS DOOR ASSY RIGHT 9152 1 78 HOOD STAND SIDE LEFT 8 91583 1 727 HOOD STAND SIDE LEFT 91877 1 78 HOOD STAND SIDE RIGHT 9 91886 1 72 HOOD STAND SIDE RIGHT 10 91579 1 78 HOOD STAND BACK PANEL FSH 3 5 10 91588 1 727 HOOD STAND BACK PANEL FSH 3 5 92088 1 78 HOOD STAND TOP BACK PANEL FSH vera 92125 1 78 HOOD STAND BOTTOM BACK PANEL FSH 4 NUES 92100 727 HOOD STAND TOP BACK PANEL 92127 1 72 HOOD STAND BOTTOM BACK PANEL FSH 4 n 91830 2 CHANNEL APPLIANCE POSITION FSH 3 5 ne 92128 2 CHANNEL APPLIANCE POSITION FSH 4 Not shown Model FSH 3 5 amp FSH 4 Parts List Notes Model FSH 3 5 amp FSH 4 GILE FOODSERVICE EQUIPMENT Giles Enterprises Ine Tue 2427057 SCI USA FAX TAL wget
2. Front View Position Filter w in a vertical 3 position Switch Arm must actuated by the Baffle Filter as shown 4 02 04 Baffle Filter Mi Ig If ether Fiter is missing or not positioned correctly the Fitter Missing Light wil luminate and power to cooking appliance is interrupted unti the condition is corrected Appliance Powered light wil tum OFF Soo Section 4 203 Baffle Filter Installation Model FSH 3 5 amp FSH 4 Operation amp Filter Maintenance 4 02 05 Baffle Filter Cleaning Grease Baffle Filters should be cleaned dally Place them in sink and clean with a mild biodegradable degreaser Dry fiters thoroughly and reinstall the unit 4 02 06 Pre Filter Removal 1 Piace in OFF position Pro Fiter Door open Front View Operation amp Filter Maintenance Model FSH 3 5 amp FSH 4 PreFiher Paper Side Metal Mesh Side Pre Fiter Switch Roller must be actuated by the Profiter as shown Front View M Close Door 4 02 08 Pre Filter Filter Missing ether Pre Fiteris missing or not properly positioned the Fier Missing Light wil iluminate and power cooking appliance is interrupted uni the condition is Sorected Appliance Powered ight wil tum OFF Section 4 02 07 Pro Fier Instalation
3. Used ein us wi rin Stan LS system Power Switch 1s o pon witch sich upward to the position for operation 4 CHECK LED Indicator The Check Indicator Light will turn on when the EAC shorted EAC nods o pei Chi il as on whan ERE some excesstvaly dry NOT usa ins ras a signal 5 masi Len insito forro cosy ote EAC vo dean tha EAC sly Tho Lot EACK fei sian done da i of irc ter ard Rossel arat sc EAC power sus Cean te EAC PON LED diemor me ON Indicator Lahe wil tum on whan te Encre Ar Right amp Left EAC power supply is on rosa ati Fn Gal Far Ced Ur i tum n when dirty clogged na Chr ae Fir Missing Lan Waris when Chanter ate ritor i Cron reFitr or Bott ft meio o ner wie rectly installed a pana UR cosy ap pe toed Is ood For gh wi um an who Bath of ar 0 toca powered light properly ond pews auch on i Metu mit aoe be deed InterLocking Start ILS Only a Model FSH 3 5 amp FSH 4 Overview 3 02 Filter Chamber and Exhaust o Not shown Not shown 2 Model FSH 3 5 amp FSH 4 3 02 Filter Chamber and Exhaust Description 2 Hood Filter Door Function Used to access the Pre Filter EAC and Charcoal Filters The door must be closed and latched for the unit to operate
4. Alarm emitting an intermittent 4 wires shorted la Check voltage o Bad contact plate Je Replace contact plate module faulty Replace EAC module jo EAC ionizer wira broken or Replace ionizer wire missing Parts List Model FSH 3 5 amp FSH 4 7 Parts List This section lists various replacement parts available for the FSH 3 5 amp FSH 4 7 1 Parts Ordering and Service Information If you require assistance or need repairs please contact an area Giles dealer to assist with locating a ice provider in your area or for further assistance please contact Giles Enterprises directly at the following phone numbers INTHE UNITED STATES CANADA or MEXICO Please call 800 854 4537 during normal business hours 8 00AM to 5 00PM Central Time other than Normal business hours 800 554 4537 and follow recorded prompts to reach afterhours support IN ALL OTHER COUNTAT Please call 334 272 1457 during normal business hours 8 00AM to 5 00PM Central Time other than normal business hours 334 272 1457 and follow the recorded prompts INTERNET Please visit our website at www afsequipment com or e mail services gfsequipment com The goal of the Giles team is to provide you with the highest quality service and assistance You can help us accomplish this by obtaining the folowing information and having it readily available when calling The i
5. a Model FSH 3 5 amp FSH 4 Operation amp Filter Maintenance 02 09 Pre Filter Replacement NEVER attempt to clean and re use the Pre Filter This could damage the unit Replace Pre Fiters weekly Replacement Part No 91707 14 02 10 EAC Filter Removal 1 Place in OFF position Left EAC Fitter Right EAC Fiter Door open au EAC Fiter Folding Handle Operation amp Filter Maintenance Model FSH 3 5 amp FSH 4 4 02 11 EAC Filter Instal n Left EAC Air Right EAC Air Filter Contact Hood Contact Flow Arrow Flow Arrow Plate Plate EAC alignment Pin gt EAC Filter Folding Handle Plates must make contact If ether EAC Fiter is missing or not properly positioned all 3 EAC LED s illuminate and after approx 2 minutes an intermittent tono alarm wil Sound Appliance Powered ight wil tur OFF and power to interlocked underhood cooking appliances is interrupted until the condition is corrected Model FSH 3 5 amp FSH 4 Operation amp Filter Maintenance Three LED indicator lights on the Control Panel display the status of each EAC Fir The EAC Fiter is in place powered and operating proper E WASH When on indicates the collection fins are becoming excessively diry and must be Cleaned Aler approx 2 minutes in this cancion n tona alm vil sound An
6. 2 Battle Fiter ae Filters are the Wist stage of he grease extraction and ar cleaning system of this unit These fiters are easily removed for daily cleaning To prevent contact with electrical parts and avoid electrical shock DO NOT remove the Baffie Filters while the hood is operating The Baffle Filter should be cleaned daily 2 PreFilter Pre Fitters remove additional grease aden vapors from the air steam To prevent contact with electrical parts and avoid electrical shock DO NOT remove the Pre Filter s while the hood is operating NEVER attempt to clean and re use the Pro Filtors Replace with new filters weekly EAC Filter Left and Right Fitters are electrostatic devices that remove grease vapor and smoke generated by the appliance during cooking To pre vent contact with electrical parts and avoid electrical shock DO NOT remove the EAC Filter while the hood is operating The EAC should be cleaned dally 2 Charcoal Filter Charcoal Fitar helps to eliminate cooking odors These Filters should be replaced monthly To prevent contact with electri cal parts and avoid electrical shock DO NOT remove the Charcoal Filter while the hood is operating NEVER attempt to clean and re use the Charcoal Filters Replace with new filters every 30 days m Hood Skirt The Hood Skirt helps contain and capture grease laden vapors produced by the cooking appliance Exhaust
7. and povero Continuous tone PPlance is shutdown ARDT Fiter dirty Replace Fiter or Powered htt Is OFF nr me ood fn v l So Am sounds Fitur Mamet and power to he is shutdown planos muss ay aan Finer 492228 mes Powered light is OFF Baffle Filter Clean Fiter 40205 us me ood fan v l crea andor Wash LED s wl riae sounds fer approx 2 minutes power oho aos Imritent ono is applanco EAC iter diny Clean Fior 9 Model FSH 5 amp FSH 6 Operation amp Filter Maintenance Notes Hood Cleaning and Maintenance Model FSH 3 5 amp FSH 4 5 Hood Cleaning and Maintenance This Section describes cleaning and maintaining the Hood System Attention to these procedures will help ensure tha hood remains efficient over time Maintenance amp Service Log is provided in this manual see Section 58 Monthly Interlock Check The Giles Ventiass Hood System is designed with various interiock devices to ensure the unit operates in a safe and effective manner These interlocks should be tested MONTHLY as described below Use tha Maintenance amp Service Log and place a check in the box that corresponds to each function test problem is found your service representative 1 Filter Check Pisco power switch in tho OFF postion remove t
8. 1 Inspect storage tank for chemical level and charge pressure Inspect release mechanism 2 Check all nozzles to insure they are free of grease buildup Seo Section 2 06 4 Extinguisher Nozzle locations Test the remote manual pull station for activation and wear Install test link and cut to simulate automatic actuation Clean and inspect fusible links See Section 208 2 for Fusible Link locations Inspect fusible link wire cabling for wear at pulleys and detectors replace if necessary Record maintenance date and service performed in a permanent file 54 Annual Fire Suppression System Same as Semi Annual with the exception that all fusible links must be replaced with new links See Section 2 062 Fire Suppression Fusible Links 12Year Fire Suppression System Same as Annual except for the following 1 Replace R 102 fire suppressant chemical 2 Hydrostatically test the holding tank and charging cartridge Can be replaced with new components that have current hydrostatic certifications 3 Flow test the regulator Hood Cleaning and Maintenance Model FSH 3 5 amp FSH 4 Tas Fer SARET Must be performed Pro FikerDoorinterlock Check or TEAC Fite Cs Section ET 4 Charcoal Fior Check Section di er Clogged Check Section BT company 5 Dusrtery Cleaning Section 52 7 Fire Suppression System Secton 5 e Fire Suppression System replace Fusible
9. Information 72 Component Drawer 73 From View Doors and Panel removed 74 Ballo Fiters and Switches 75 Doorsand Front Panel Calling Mounted 76 Doors and Front Panel Free Standing Safety Model FSH 3 5 amp FSH 4 Safety Overview The instructions contained in this manual have been prepared to aid you in leaming the proper procedures for installing and servicing your unit Throughout this manual safety precautions are identified through the use of the safety alert symbol and three signal words DANGER WARNING and CAUTION All safety alert information precedes the stepls to which they apply Suggested recommended or other noteworthy information is identified through the use of NOTES Additionally certain words are used to indicate a specific meaning or to add emphasis The following words are used as indicated throughout the manual understood to be mandatory understood to be advisory May understood to be permissive Will indicates a future event condition to occur AoA Safety Alert Symbol Used in conjunction with signal words DANGER WARNING or CAUTION to alert you of potential por onal injury hazards immediately preceding precautionary measures that pertain to subsequent stops Obey all safety messages that follow this symbol to avoid possible injury or death Failure to adhere to safety precautions identified by the safety alert symbol may also void the warranty DANGER indi
10. Links Section 54 a Model FSH 3 5 amp FSH 4 Hood Cleaning and Maintenance Notes Troubleshooting Model FSH 3 5 amp FSH 4 6 Troubleshooting This section describes basic troubleshooting procedures for the FSH 3 514 The wiring diagram attached inside the back cover is provided to assist qualified technicians with more in depth troubleshooting Electrical troubleshooting procedures should be performed ONLY by a qualified service technician or electrician Death or serious injury will result from contact with energized electrical components Failure to comply with these DANGER notices can result in death or serious injury equipment property damage and possibly void the warranty Troubleshooting Procedures Problem Probable Cause Corrective Action jad will not tum on ILS Only HOLD TO START button not held for 5 seconds 8 Hold down HOLD TO START Faulty power switch Replace power swith Connect to proper voltage Improper supply voltage ld Filter Access Door not closed 4 Close access door le Not properly connected to je Connect to proper power power source source Blown fuse or tripped circuit edhe abi peu Check fuse or breaker Filter Missing Light Muminated Baffie fiter is not installed a install Baffle fitr e Initial Startup Only Charcoal fitar is not installed o Install charcoal fita le PreFiter
11. Model FSH 3 5 amp FSH 4 Installation 2 02 Location NOTE eme dct ot th wnan pring primi 79 DO NOT MODIFY ALTER OR ADD ATTACHMENTS TO THIS EQUIPMENT NOTE HVAC specialist may be required for some installations to confirm proper air exchange and the heat load capabilities of the on site AC system Exhaust ventilation is recommended for areas in which recirculating hoods are used We recommend 50 CFM per neal tt of hood This amount coud vary based local codes and the site specific installation requirements 1 Do not ebstruct the exhaust air outlet Maintain a minimum clearance of 14 inches 355 6mm between the air outlet and ceiling or any obstruction 2 Ensure intended mounting site is structurally sound and capable of supporting the hood s weight See Section 14 4 for hood weights 03 1 Hood Mount 32 Al Thread 1 2 Hex Nut 1 2 Lock Washer Ss 1 2 Flat Washers g Detail Ceiling Mount 1 2 Flat Washer 1 2 Lock Washer 32 Hex Nut man sen pm 1 Ensure the hood is level left to right and front to back 2 Ensure all mounting fasteners are tight and secure Installation Model FSH 3 5 amp FSH 4 2 032 Skirt Installation Ceiling Mount NOTE Ha Sins MUST bo for prop cape 1 Apply a bead of HiTemp Silicone included to the top fla
12. Outlet The Exhaust located on front of tha Un exhausts the fitered air back into the room A minimum clearance of 14 must be maintained between the top of the Exhaust Outlet and the Ceiling or other obstruction for proper air flow Grease Drip Cup The Grease Drip Cup s Used To catch grease condensate generated at the Baffle Fiters This cup must be emptied and cleaned daily Not shown Model FSH 3 5 amp FSH 4 Overview 3 03 Accessories Included Part Description Part Number Function 2 Batt Fiter Removes large particle PIN 40943 contaminant from the ai 2 PreFittor Removes additional grease PIN 91707 laden vapors from the air EAC Filter PIN 20621 LEFT PIN 20520 RIGHT Removes smoke and small particle contaminant from the 24 Overview Model FSH 3 5 amp FSH 4 3 03 Accessories Included Part Desctiption Part Number Funetion 2 Charcoal Fiter Helps remove odors from the PIN 31964 air EAC Soak Tank Used for soaking and cleaning PIN 39327 EAC filter Model FSH 3 5 amp FSH 4 Overview Notes Operation amp Filter Maintenance Model FSH 3 5 amp FSH 4 4 Operation amp Filter Maintenance This section describes Hood operation and filter maintenance 4 01 Hood Operation Starting the Ventless Hood Make sure Filters are in place and fiter access doors are closed before attempting
13. air exchange and the heat load capabilities of the on site AC system Exhaust ventilation is recommended for areas in which recirculating hoods are used We recommend 50 per lineal ft of hood This amount coud vary based on local codes and the site specific installation requirements 2 01 Unpacking Your Ventless Hood should arrive paletized with a wooden protective frame wrapped in machina applied stretch wrap and secured to by means of high tensile plastic strapping Perform the following steps to unpack the unit 1 Position the palletized unit in an area that has sufficient space for unpacking TI IMPORTANT NOTE f the palletized unit shows any signs of damage immediately inspect the equipment and other packed components and notify the freight company of any and all damages 2 Cut and remove stretch wrap and all strapping 3 Use a hammer and pry bar to remove the wooden crate from around the unit Use suitable equipment to lift the hood and carefully move it away from the pallet see Section 14 4 for hood weights Take precautions not to damage to the hood s bottom skirting If possible it is advisable to rig and lift the hood from the topside utilizing the hood s hanging brackets Exercise care when removing the wooden framing from around the unit Failure to comply with these CAUTION notices may result in minor or moderate injury equipment property damage and void the warranty
14. breach of any express or implied warranty on this product except to the extent prohibited by applicable law Any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this limited warranty Used Giles Enterprises Inc Foodservice Equipment or parts or Giles Enterprises Inc Foodservice Equipment or parts not purchased from an authorized Giles Enterprises Inc representative carry warranties express or implied Table 0f Contents Safety A 4 Safety Overview Specific Safety Precautions vi 1 Introduction 1 ti Construction 1 12 Standard Features 1 T3 Optional Features 1 T4 Specifications 2 Overall Dimensions 2 143 Regulatory Listings 4 144 Hood Weights 4 2 Installation 5 20 Unpacking 5 202 Location 8 2031 Calling Mount Hood Mounting Detail 6 2032 Hood Skir Installation 7 2033 Standing Mounting Detail 204 Cooking Appliance limitations and clearances Ne 2041 Fryer limitations E 2042 Fryer clearances Lila 2043 Oven limitations E 2044 Oven clearances 0 2045 Griddle limitations nnm 2048 Griddle clearances 2047 Range limitations 2 2048 Range clearances 2 205 Hood Electrical Requirements 13 2 051 Electrical Connections 13 2052 Routing Power Wires 14 2053 Hood and Appliance Interlock Diagram 15 206 Fire Suppression System Installation 15 2081 Suppressi
15. described in this manual We urge you to read these instructions before installing or using this hood Adherence to these recommended procedures will minimize potential for costly downtime and equipment repairs Please retain this manual for future reference The Ventless Hood System exterior is constructed of stainless steel 1 2 Standard Features Control Panel Two LED light clusters indicate the status of the left and right EAC filters Appliance Powered light indicates that power is being supplied to tho interlocked appliancels under the hood Fiter Missing light indicates that one more Baffle filter Pre fiter and or Charcoal filter is missing installed improperly Fiter Clogged light indicates that the Battle fiters Prefiters and or Charcoal filters are possibly clogged and require attention to ensure proper hood performance Filters Baffle Filters capture large grease particles in tho air stream Pre Fitrs capture the smaller grease particles Electronic Air Cleaners EAC capture smoke amp fine particle air contaminates 5 Charcoal Filters help eliminate cooking odors 1 3 Optional Features intorLocking Start System ILS InterLocking Start System ILS Should there be a power interruption to the the hood this system wil nat allow the Hood and the Appliancels below it to restart without the attendance of an operator This system is required by codo in some c
16. to operate the unit NOTE The hood will NOT powerup if either filter door is open 1 Place the Power Switch E to the ON position LS model press and hold the Push amp Hold to Start Button AED for 5 seconds The EAC ON light wil iluminate and the Appliance Powered light E wil turn ON The cooking appliance under the hood which is interlocked with the hood may now be tumed on 2 Pross the Light Switch f to the ON position to turn on tho undorhood lights ILS Only Filter System operation cleaning and maintenance schedule 4 02 01 Ventless Hood Filter Table When to clean or Fitar nts clean or Howto remove Howto lean How to instali Bate Fiter Clean daly Section 0202 Section 40205 Section 402 03 Naver clean Profiter Replace weekly Section 40205 Replace Only Section 40207 Socton 40208 EAC Fiter Gian dely Section 40210 Soction402 13 Section 0271 over cian Charcoal Fiter Replace voy 30 Secion40214 Replace Only Section 402 15 Section 4 02 17 a Violet Lamp every 30 days Section 4 02 19 Section 4 02 18 Section 4 02 20 Replace annually Model FSH 3 5 amp FSH 4 Operation amp Filter Maintenance 4 02 02 Filter Removal 1 Place in OFF position Operation amp Filter Maintenance Mode FSH 3 5 amp FSH 4 mu mig NIA
17. FT SIDE ONLY 20520 1 FILTER EAC 12X 20 RIGHT SIDE ONLY 5 E 2 CHARCOAL FILTER ASSY 21157 2 DOOR SWITCH FILTER ACCESS T 23200 4 SWITCH SNAP ACTION ROLLER 21125 2 CONTACT BOARD EAC FILTER 33589 2 BLOWERASSEMBLY Not shown Model FSH 3 5 amp FSH 4 Parts List Not shown 50 Parts List Model FSH 3 5 amp FSH 4 7 4 Parts List for Baffle Filters and Switches TEM PART NO ay DESCRIPTION 1 40943 2 BAFFLE FILTER ss 16x20 2 1 3 32102 2 BAFFLE FILTER SWITCH ASSY 4 p 1 uen FixruRE 5 20395 FLUORESCENT BULB COATED 51 Model FSH 3 5 amp FSH 4 Parts List Parts List Model FSH 3 5 amp FSH 4 5 Parts List for Doors and Front Panel Ceiling Mount TEM PART NO mv DESCRIPTION 1 42827 2 DOOR LATCH 2 1 ACCESS DOOR ASSY LEFT a 40929 1 FIRE DAMPER 91553 1 FAN COVER 5 31699 1 GUARD FIRE DAMPER 5 91475 1 ACCESS DOOR ASSY RIGHT 8 91709 1 SIDE SKIRT PANEL LEFT 8 err 1 SIDE SKIRT PANEL RIGHT 10 91705 1 BACK SLASH PANEL FSH 3 5 10 92101 1 BACK SPLASH PANEL FSH4 Not shown Model FSH 3 5 amp FSH 4 Parts List 7 6 Doors and Front Panel Free Standing Not shown Consist of 2 pieces on FSH 4 54 Parts List Model FSH 3 5 amp FSH 4 7 6 Parts List for Doors and Front Panel Free Standing
18. Operations amp Service Manual s sssrsu Model FSH 3 5 amp FSH 4 Giles Enterprises Inc 150 9001 Registered Commit o Di es Mongoma AL 619 USA Phone 32731487 Fac 24204117 wwgfcqipnentcom pes FOODSERVICE EQUIPMENT Fer Na dne 0 09 Revision Date 08 10 Rer FOODSERVICE EQUIPMENT LIMITED WARRANTY Subject to the terms and conditions of this Limited Warranty as herein stated all iles Enterprises Inc Foodservice Equipment and parts purchased new from an authorized Giles Enterprises Inc representative are warranted as to defects in material or workmanship for a period of 12 months from the date of installation provided however that with regard to labor costs in connection with this warranty see below All installations must be made by a qualified instaling agency in accor dance with all applicable codes and or regulations in the jurisdiction in which installed Limited war ranty coverage is extended to the original owner only and is void if the unit is resold During the Limited Warranty period Giles Enterprises Inc wil replace or recondition at its factory or parts of this unit which Giles Enterprises Inc inspectors judge defective provided the unit has been subjected to normal usage propery installed operated and serviced This Limited Warranty does nat cover cosmetic damage and damage due to acts of God accident misuse altar ation negligence abuse of the Giles F
19. cates an imminently hazardous situation which not avoided will result in death or serious injury Uso of this is limited to the most extreme situations Indicates a potentially hazardous situation which if not avoided could result in death or serious injury Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury Also used to alert against unsafe practices When used without the safety alert symbol CAUTION indicates a potentially hazardous situation Which if not avoided may result equipment property damage and void the warranty NTE sugested recommended or other noteworthy information Model FSH 3 5 amp FSH 4 Safety Specific Safety Precautions For your safety please observe the folowing precautions when operating or servicing your Ventless Hood equipment Read the following important safety information to avoid personal injury and or damage to the equipment or property A DANGER Always disconnect the source of the main power before removing the service entrance box cover Failure to ensure the Power switch is in the OFF position during servicing and when replacing filters could result in equipment damage electrical shock and or personal injury Failure to comply with these DANGER notices will result in death or serious injury equipmentiproperty damage and void the warranty DO NOT us
20. d power to underhood cooking planet vil be Inteuptod unt the conected Tho Appiance Powered ht wil tum OFF EB CHECK When ON indicates the Fiter is not operating Thar ear a poor connection at the contacts or te ther is damaged After appro miner nti concn an tona alam sound and power t mtefoctd dor hood cooking applancels wi be intorupted nti ha condition Ia coreced The Roplance Powered ight wil tum OFF 4 02 13 EAC Filter Cleaning The EAC Filter should be cleaned daily Do not bend the fins or break the ionizer wires on the EAC as this will prevent the electrostatic collecting cell from performing properly and potentially void the warranty Y VE gal of a dopraser such as Simple Green or Clan Magic otha Soak Tank RB add water t fil ine OC and mix 2 Holding th cell by tha contact plate EB carefuly lower the EAC into the mixed degreasing solution 3 Alow the EAC to soak for 20 10 30 minutes Grasping it by the contact piate it and agitate vigorous up and down in the solution several times to lodge grease residue 4 remove the EAC from th tank and rinse thoroughly in a sink using hot water 5 Allow the cell to air dry thoroughly 6 Inspect for broken wires or bent fins Have broken wies replaced Bent fina may be ganty straightened by hand f needed NOTE The EAC cell is NOT designed to withstand washing
21. d repairs General Maintenance of the fire suppression system is very important Inspect and maintain as follows Servicing and inspection of the fire suppression system is to be conducted by qualified fire protection technicians As a minimum field inspection of the fire suppression system is to be performed semi annually Such maintenance shall consist ofthe following Confirm that the hazard has not changed Verify that system pressure is nominal Inspect the soundness of the discharge spray nozzles and fusible links Ensure the system is properly located with respect to the appliance Verify the date the unit was manufactured Check to be sure the service tag is attached indicating what service was performed and when performed Ansul is a registered trademark Model FSH 3 5 amp FSH 4 Installation NOTES Overview Model FSH 3 5 amp FSH 4 3 Overview The following section provides a brief overview of the components functions and accessories of the FSH3 5 FSH 4 Series hood Please review this section carefully before proceeding any further Hood Exhaust Duct 19 Model FSH 3 5 amp FSH 4 Overview 3 01 Control Panel ILS Only 20 3 01 Control Panel Item Description Model FSH 3 5 amp FSH 4 Function Tight Sch Used oun tho hood fight on and ott 3 teri Paner Site sito OWT posi push and gt PUSH to START Suton rs
22. d void the warranty The electronic components of the Control Panel are impact sensitive Exercise care around the Control Panel to maintain proper operation Do not attempt to dry the EAC after cleaning by installing it and running the hood to force air dry or by running an appliance below to heat dry This could potentially damage the EAC system leading to fail ure and voiding the warranty The filter must air dry at ambient room temperature preferably overnight During cleaning of Hood DO NOT steam clean DO NOT use products containing chlorine DO NOT use abrasive products steel wool or scouring pads Failure to comply with these CAUTION notices may result in equipmentiproperty damage and void the warranty vil Model FSH 3 5 amp FSH 4 Safety ME ee eT upon receipt the palletized unit shows any signs of damaged immediately inspect the entire Ventiess Hood and the included accessories and promptly notify the freight company of any damages To aid the electrician an electrical wiring diagram is attached inside the back cover of this manual Refar to the wiring diagram during installation or servicing A wiring diagram is also attached to tha inside of the filter access door Comply with all appropriate state and or local heath regulations regarding the cleaning and sanitation of equipment For cleaning areas with excessive particulate build up a mild bio degradable non toxic
23. degreaser such as Clear Magic or Simple Green may be used Always ensure the unit is electrically grounded and installed in accordance with local codes or in the absence of local codes in accordance with the National Electrical Code ANSI NFPA No 70 1984 NOTE decibel level of the hood when operating is approximately 73 dB NOTE HVAC specialist may be required for installations to confirm proper air exchange and the heat load capabilities of the on site AC system Exhaust ventilation is recommended for areas in which recirculating hoods are used We recommend 50 CFM per lineal ft of hood amount could vary based on local codes and the site specific installation requirements vill Introduction Model FSH 3 5 amp FSH 4 1 Introduction Congratulations on the purchase of a new FSH 3 5 or FSH 4 Giles Ventless Hood System manufactured by Giles Enterprises Inc Montgomery Alabama USA hereafter referred to as Giles These two models available in either ceiling mounted free stand mounted versions The stand mounted version is available in a 72 of 78 height measured from the floor to the bottom edge on the hood skirt Proper care and maintenance of this unit will ensure years of trouble free service and to help protect your investment in this equipment we recommend taking a few moments to familiarize yourself with the installation cleaning and maintenance procedures
24. e or store flammable liquids or materials that produce flammable vapore in the vicinity of this or any other appliance Consult a qualified electrician to ensure electrical specifications have been met and the unit is prop erly grounded Before installing or servicing this equipment read the contents of this manual thoroughly improper installation adjustment alteration service or maintenance could result in death or serious injury equipmentiproperty damage and void the warranty Failure to comply with these WARNING notices could result in death or serious injury and equipmentiproperty damage vi Safety Model FSH 3 5 amp FSH 4 Maintain a minimum clearance of 14 355 6mm between the hood outlet and the ceiling or any obstruction above the hood 18 457 2mm is recommended for best performance Exercise care when lifting or moving the unit See Section 1 4 4 for Hood weights Exercise care when removing the wooden crate from around the unit DO NOT operate the unit unless you fully understand the components and their intended function Be careful not to bend the fins or break the ionizer wires on the Electrostatic Air Cleaner EAC Doing so will prevent the EAC from working properly and cause a shutdown of power to the appliance being used with the hood Failure to comply with these CAUTION notices may result in minor or moderate injury equip mentiproperty damage an
25. ho left side Baffle Filter turn power Fier Missing Light should be iluminated and Appliance Powered light should be OFF Tum power and reinstall the Grease Baffle Filter Follow the same procedure to chock the right side Filter 2 Pre Filtr Door Interlock Check Tum power switch ON with Hood running slightly open the Fiter Access doar confirm Hood shutdown when door is opened power switch OFF Remove the lelt Side Pre Fiter and close door power Fiter Missing Light should be lluminatod and Appliance Powered light should be OFF Tur power OFF and reinstall Pre Filter Follow the same procedure to check the right side Pre Fior EAG Filter Check Paco power switch in tho OFF position remove the letsido EAC Filtar and close door tum power ON Wait 2 minutes intermittent alarm should sound and Appliance Powered ight should ba Tum power switch OFF and reinstall EAC Fiter Follow the same procedure ta check right side EAC Fiter 4 Charcoal Filter Check Place power switch in the OFF position remove the lft side Charcoal Filter and lase door tum power ON Filter Missing Light should be iluminated and Appliance Powered light should be OFF Tum power switch OFF and reinstall Charcoal Fiter Follow the same procedure to check the right side Charcoal Fiter 5 Filter Clogged Check Pisce Hood power switch in the ON position The blower wil start and a continuous t
26. imeters 70 Installation Model FSH 3 5 amp FSH 4 2045 Griddle Limitations Electric Appliances Only Temp Max kW Input Max Cooking Surface FSH 3 5 4 400 25 42 42 Griddle Clearances side to side overhang requirement does not apply with Free standing Mount model 5 7j viata BE ai INSIDE tua COOKINO SURFACE Inches Milimeters Model FSH 3 5 amp FSH 4 Installation 2 04 7 Range Limitations Electric Appliances Only Max Temp Max kW Input Burners FSH 3 5 4 400 25 8 048 Range Clearances side to side overhang requirement does not D ing Mount model 136561 MIN aa 1 MN INSIDE 004 18 ae BOOKING SURFACE F tieza MIN Inches Milimeters 12 Installation Model FSH 3 5 amp FSH 4 2 05 Hood Electrical Requirements Consult qualified electrician to ensure all electrical specifications have been met and that tho unit is propery grounded improper instalation adjustment alteration service or maintenance could result in death or serious injury equipmentproperty damage and void the warranty Hood Electrical Requirements Voltage Hz Phase Amps FSH35 amp 4 20807240 1 15 20 05 Electrical Connections Install appr
27. in commercial dishwashers Operation amp Filter Maintenance Model FSH 3 5 amp FSH 4 Place in OFF position Door open a Front View Model FSH 3 5 amp FSH 4 Operation amp Filter Maintenance 4 02 15 Charcoal ia 4 Door open Blue side Charcoal Filter Switch Roler must be actuated by the Charcoal Front View Fiter as shown Close Door a 4 02 16 Charcoal Filter Missing If either Charcoal Fer is missing or not properly positioned and the unit is on the Filter Missing Light ED illuminate and power to cooking appliance is interrupted until the condition is corrected Appliance Powered light will tum OFF Section 42 15 Charcoal Fiter Installation Operation amp Filter Maintenance 02 17 Charcoal Filter Replacement Model FSH 3 5 amp FSH 4 NEVER attempt to clean and re use the Charcoal Filter This could cause damage to the unit Replace the Charcoal Filter every 30 days Use Replacement Part No 31964 Please take the time to record installation date in space provided on the new filtr label 14 03 Filter Alarm Chart Alarm Sound What will happen Filter affected Cause Solution See Section Alarm sounds Clogged Filter Powered light is OFF ILS model the hood fan wil also shutdown lamp
28. is not instaled c install prefiter Cheek or Wash LED Muminated EAC shorted Replace or repair EAC LED light cluster for each side s liter b EAC diny b Clean High voltage power supply Replace high voltage power faulty supply ld High voltage wires shorted d Correct shorted condition le Bad contact plate Je Replace contact plate Model FSH 3 5 amp FSH 4 Troubleshooting Troubleshooting Procedures Cont d Problem Probable Cause Corrective Action la Filter missing Ja Install Baffle Filter Hood power ON Eia Fiter not installed FILTER MISSING light ON property ae APPLIANCE POWERED light OFF Charcoal Fiter missing Install Charcoal Fiter ance wil not heat a Charcoal Filter logged 2 Replace Charcoal Fiter Hood power ON FILTER CLOGGED light ON lb Battie Filter clogged Clean Battle Fiter APPLIANCE POWERED light OFF Alarm emitting a continuous tone le Clogged filter switch out of Adjust clogged switch only adjustment initial start up switch bad 8 inked vacuum tne Remove vacuum ine rks Fon naning alow le Check ottone Appliance wil not heat a EAC shorted a Ropa EAC Hood power ON anv Gan CHECK and or WASH LED s ON APPLIANCE POWERED light OFF EAC power supply fauty Replace EAC power supply
29. ities and or states Please consult with your local code officials to if this option is required Floor Stand Mount 572 or 78 high stand mounts are available instead of the standard ceiling hung mount height measured from floor to bottom edge of Model FSH 3 5 amp FSH 4 Introduction Pp Introduction Model FSH 3 5 amp FSH 4 1 4 2 Overall Di ensions for FSH 5 4 Free Standing Option Er enr wm mouriscntoceuna ig Model FSH 3 5 amp FSH 4 Introduction 1 4 4 Hood Weights Hood Crated Weight Uncrated Weight FSH Ceiling Mt 664 Tbs 302 kol 464 bs 1211 kol FSH35 Stand Mt 733 Ibs 1933 kg 553 ibs 257 kal FSH Ceiling 724 tbs 1928 kol 524 65 243 kal FSHA Stand Mt 793 Ibs 368 kol 613 bs 284 kal Installation Model FSH 3 5 amp FSH 4 2 Installation This section summarizes the procedures necessary to install your new FSH 2 5 or FSH Hood Before installing or servicing this equipment please read the contents of this manual thoroughly Following these Procedures will help ensure a safe and proper installation NOTE HVAC specialist may be required for some installations to confirm proper
30. nformation is recorded on a Serial Plate or Label attached to the unit Serial Plata Record information here for quick reference in the future Model Name Serial Number Phase Model FSH 3 5 amp FSH 4 Parts List Component Draw ILS Only Parts List Model FSH 3 5 amp FSH 4 2 Parts List for Component Drawer FSH 3 5 amp FSH Tem Pat No Description T 24208 2 EAC POWER SUPPLY WDRIVER BOARD 206 2400 2 2378 2 ALARM amp SHUTDOWN MODULE AIR FILTER 3 20399 INDICATOR LIGHT AMBER 3 20402 2 INDICATOR LIGHT RED 250V 5 20998 INDICATOR LIGHT GREEN e 24209 2 LED EAC STATUS INDICATOR 7 2899 1 VACUUM SWITCH ADJUSTABLE E 2080 1 ROCKER SWITCH ON OFF 250V 20A DPST 5 23782 1 SONALERT 250V CONTINUOUS TONE dU 22580 1 SONALERT 250V INTERMITTENT TONE 21052 1 ROCKER SWITCH ONOFRON 2501 20A DPDT 12 23173 1 SWITCH MOMENTARY PUSH BUTTON ILS PUSHTO START 38 20818 RELAY 240 VAC 10A 1 RELAY BASE ILS Only 47 Model FSH 3 5 amp FSH 4 Parts List Parts List Model FSH 3 5 amp FSH 4 3 Parts List for Front Compartment Doors and Panel removed TEM PART NO ay DESCRIPTION 1 su 2 PREFILTER ASSY 12x 20X2 2 91545 2 DRIP cur EAC FILTER 3 20821 1 FILTER EAC 12X 20 LE
31. nges of both Side Skirts 2 Attach Left and Right Side Skirts to hood with enclosed fastners do not tighten completely 3 Apply a bead of the HiTemp Silicone to the top flange of the Fear Skit 4 Attach Rear Skin to hood with enclosed fastners do not tighten completely 5 Fasten Left ond Right Skins to Rear Skin 6 Completely tighten all fastners and wipe any excess silicona from the assembled Skin NOTE Peel all protective fim from parts before assembling 21 1 20 Nut Bead of HHTamp Silicone enclosed Bead of HiTemp _ Silicone enclosed a me 7 Right Skirt Model FSH 3 5 amp FSH 4 2 03 3 Hood Mounting Detail Free Standing FRONT OF STAND Installation STEP2 V SER a ACER Installation Model FSH 3 5 amp FSH 4 Max Cooking Max Cooking Surface per Surface Total Fryer all Fryars Fryer Clearances side to side overhang requirement does not apply with Free standing Mount model E Em E ws SH hm Ed ToS MN v Inches Milimeters Model FSH 3 5 amp FSH 4 Installation 2 04 Max kW Input Mes ew Total all Ovens FSH 3 5 4 500 55 Oven Clearances MN p ss Inches Mil
32. on System Routing 15 2062 Suppression Fusible Links 16 2063 Appliance Nozzles 18 2064 Fire Extinguisher Nozzle Locations 7 2065 Genera Maintenance 7 Overview data 4 301 Control Panel 20 302 Fiter Chamber and Exhaust 2 303 Accessories Included 2 Model FSH 3 5 amp FSH 4 Model FSH 3 5 amp FSH 4 Table Of Contents 4 Operation amp Filter Maintenance 27 40 Hood Operation 402 Filters and Filter Maintenance 402 01 Ventiess Hood Filter Table 40202 Bafile Filter Removal 4 02 03 Bafile Filter Installation 4 02 04 Baffle Fiter Missing 40205 Bafile Filter Cleaning 40206 Pre Fiter Removal 40207 Pre Fier Installation 4 02 08 Pre Fier Fiter Missing 4 02 09 Pre Fiter Replacement 402 10 Filter Removal 402 11 iter Installation 40212 Fitter Status 4023 Filter Cleaning 402 4 Charcoal Filter Removal 402 15 Charcoal Fiter Installation 402 16 Charcoal Filter Missing 4 02 17 Charcoal Filter Replacement 403 Filter Alarm Chart SR EES ENN 5 Hood Cleaning and Maintenance 39 51 Monthly Interlock Check 52 Quarterly Hood Cleaning 39 53 SembAnnual Fire Suppression System 40 sa 40 55 40 58 Annual Fire Suppression System 12 Year Fire Suppression System Maintenance and Service Log 6 Troubleshooting T 61 Troubleshooting Procedures An Parts List 7 1 Paris Ordering and Service
33. one alarm should sound for 2 to 8 seconds unti the blower reaches speed then silence Check appliances power during this time thare should ba no power supplied to applancels until the alarm silences If th alarm tone does not sound fails to silence and or the appliances falls to come on or comes on before the alarm silences contact service agent and have the Clogged Filter interlock checked Return Hood power Switch to the OFF position Quarterly Hood Cleaning To maintain effectiveness and performance the hood must be cleaned at a minimum every 3 months Disconnect power from the unit preferably at a breaker Remove filters from the hood Using soft cloth sponge towel and a mild biodegradable degreaser clean the entire hood plenum and blower section Any grease build up on the fan blades should be removed during this cleaning Model FSH 3 5 amp FSH 4 Hood Cleaning and Maintenance 5 3 Semi Annual Fire Suppression System Service Consult tho Giles Enterprises Design Installation Recharge and Maintenance Manual for complete servicing guidelines Servicing and inspection of the fre suppression system must be performed by certified qualified fire protection equipment specialists As a minimum field inspection of the Fire Suppression System must be conducted semiannually Such maintenance shall consist of the following Place fire extinguishing system locking bar on fire system when inspecting or servicing
34. oodservice Equipment or the use of unorthodox repair meth ods All parts replaced under this Limited Warranty carry only the unexpired term of this Limited Warranty Limited Warranty service may be furnished only by an authorized Giles Enterprises Inc representative If Limited Warranty service is requested Giles Enterprises Inc will send factory authorized serv ice representatives to repair recondition replace or inspect units of its manufacture with such labor being rendered without cost to owner for ninety 90 days from the date of instalation Otherwise service including labor and transportation charges or other expenses in connection with the removal or installation of any part or parts supplied under this Limited Warranty are specified on the original sales contract between the purchaser and the authorized Giles Enterprises Inc represen tative Gies Enterprises Inc reserves the right to change or improve its equipment and parts in any way without obligation to alter such equipment or parts previously manufactured Gies Enterprises Inc makes no further warranties express or implied including implied warranties of merchantability or fitness for a particular purpose and has no other obligation or liability not specifically stated herein Repair or replacement as provided under this limited warranty is the exclusive remedy Giles Enterprises Inc shall not be liable for any incidental or consequential damages for
35. opriate Circuit Breaker in Main Breaker Box See Section 2 05 Connect appropriate size wire from hood to the rain breaker Reinstall Service Panel Tum Main Breaker on Press the Hood power switch to the ON position ILS press and hold the Push to Start button for 5 secs after power is on Mod FSH 3 5 amp FSH 4 Installation Installation Model FSH 3 5 amp FSH 4 2 06 Fire Suppression System Installation Itis a requirement that the Giles FSH 3 5 4 Ventless Hood System be protected by a UL Listed fire suppression system Installation must be performed by an Authorized Fire Suppression Agent in accordance with the system listing The FSH 3 5 4 hood system is pro piped at the factory and contains supply line plenum nozzles and fusible link brackets Appliance nozzles and drop downs are not included The hood has been designed accommodate either left or right side hook up The electrical switch requirements identical to those listed in the Ansul R 102 Installation Manual with the hood system acting as the customer supplied switch 1 Use Ansul No 56822 1W Appliance Nozzles No 56927 Plenum Nozzles and Ansul No 56811 Fusible Link 1657 74 C 2 Appliance nozzles shall be positioned 17 1279 4mml below the lowermost front edge of the hood 3 Theuse of both appliance nozzles is required at all times A A manual pull sta
36. tion for the Fire System is to be installed and located in a path of exit or egress The pull station must be clearly marked and easily accessible 5 Regulated Release Assembly shall be the mechanical type Ansul P N 79290 2 06 1 Suppression System Routing Fire Extinguisher Nozzle Fusible Link Connection Regulated Release Assembly Ansul PIN 79290 Note System may ba located and connected on the left or right of the hood 15 Model FSH 3 5 amp FSH 4 Installation 2 06 2 ire Suppression Fusible Links 285 F Degree Factory 165 F Degree Ansul PIN 56811 Ansul PIN 56811 165 F Degree Ansul PIN 56811 Appliance Nozzles Center Nozzies over cooking surfacels Appliance Nozzle 2 minimum Sized and positioned by Local Authorized Fire Suppression Agency Pipe amp nozzles supplied by Customer 16 Installation Model FSH 3 5 amp FSH 4 Pinum Noe Perum ad PN Sz Ansu EN 56251219 fac sao pee ee San un cc M pedo Supplied by Customer V di 2 06 General Maintenance The fire extinguishing system should be maintained as outined in the Standard for Wet Chemical Extinguishing Systems NFPA 17A and in accordance with the instructions of the systems installer Please contact a local Authorized Fire Suppression Agent or Ansul Dealer for maintenance trouble shooting an
Download Pdf Manuals
Related Search
Related Contents
取り扱い説明書PDFダウンロード Técnicas de Expresión Gráfico NIBAN APPÂT GRANULEUX C Insecticide Pour SERVICE MANUAL SERVICE MANUAL Nova 180727 deep fryer User manual L`autisme GRADE USB 2510 住警器 - 川越地区消防組合 Copyright © All rights reserved.
Failed to retrieve file