650466 MCH-GPS17 _LCD compass_ manual
Contents
1. SAVINGS TIME TIME ZONE winter summer EASTERN UTC 05 HRS UTC 04 HRS CENTRAL UTC 06 HRS UTC 05 HRS MOUNTAIN UTC 07 HRS UTC 06 HRS PACIFIC UTC 08 HRS UTC 07 HRS ALASKA UTC 09 HRS UTC 08 HRS HAWAII UTC 10 HRS NOT OBSERVED Gauge Specifications SUPPLY Voltage Range 8 to 18 V Current draw lt 120 mA SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our products Please read through the Troubleshooting Guide There you will find the solution to most problems Should you ever need to send the unit back for repairs please call our technical support line 605 332 6513 to request a Return Merchandise Authorization number Package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include the RMA number on the package and include a complete description of the problem with RMA number your full name and address street address preferred and a telephone number where you can be reached during the day Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase Send no money We will bill you after repair Dakota Digital 24 Month Warranty DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it under normal use and c2. displays EE Temperature section of screen displays Clock time if displayed is not correct Display is difficult to read image blends together Display is too dark to read at night wake a Possible cause Internal battery has discharged over long term off season storage of the motorcycle Internal battery needs replacement or service System is attempting to determine its position from the GPS satellites Too few or no GPS satellites are in view Gauge mounting location interfering with signal Gauge needs service Temp sensor wire may be broken or disconnected Temp sensor wire is shorted to ground Hour offset from UTC has not been set Time has changed from daylight savings time to standard time or vice versa LCD contrast setting needs to be adjusted LCD backlight setting needs to be adjusted 4510 W 61st St North Sioux Falls SD 57107 www dakotadigital com Solution Battery should recharge during the time the key is on over the first few rides of the season The internal battery is not user serviceable Contact Dakota Digital for an RMA number to have the battery serviced Locating may take longer if it has been a long time since the key was last on or the bike has been moved a good distance such as ona trailer since the key was last turned off Locating will also take longer if the internal battery voltage is low GPS signals typically can be blocked if the
3. to make the gauge more readable The following steps allow the contrast to be set Enter setup menu as described in setup and select CONTRAST from the menu Release switch Press and hold switch to INCREASE the contrast Release switch to stop adjusting If needed press and hold the switch again to REDUCE the contrast Release switch to stop adjusting Repeat steps 3 through 6 as needed until desired contrast level is set Do not press the switch for 5 seconds to save the new contrast setting dots fill bottom of screen to show remaining wait time 9 Display will show DONE when setting is saved 10 Press and release the switch to return to the setup menu SET HOUR OFFSET 90O Oi ON If the message display is set to show time the hour offset must be set to show correct time Time data is received from the GPS signals in the form of UTC Coordinated Universal Time which will need an hour offset for the time zone you are in This offset will also need to be adjusted when the local time changes from standard time to daylight savings time and back again The chart below is provided to show the offset needed for several time zones If you are unsure what time zone you are in or your time zone is not listed in the chart the adjusted time is also displayed in this setup option Simply match the displayed time to the local time TIME ZONE HOUR OFFSET CHART STANDARD TIME DAYLIGHT
4. MAN 650466 SETUP ENTERING SETUP 1 The supplied switch must be connected to the switch connector on the back of the gauge 2 Press and hold the switch while turning on the motorcycle key powering up the gauge 3 The screen will display SETUP Release the switch to enter the setup menu USING SETUP MENU Press and release the switch to move through the different setup menu options To select a menu option press and hold the switch until the screen changes Press and release the switch to change the setting if desired unless noted otherwise below Press and hold the switch to save the setting unless noted otherwise below Display will show DONE Release the switch to return to main menu EXITING SETUP To exit the setup menu select EXIT from the main setup menu Alternatively the key may be turned off while in the main setup menu NOTE If the key is turned off while in a menu option changing settings the displayed setting will not be saved The setting that was previously stored will be used on next power up ONO SS SETUP MENU CONTRAST Allows adjustment to the LCD screen contrast See SETTING CONTRAST below for switch function SET HOUR Sets hour offset from UTC Coordinated Universal Time from GPS FORMAT selects between 12hr 2 34 PM and 24hr 14 34 time formats UTC 11hrs to UTC 12hrs sets hour offset from UTC for your local time zone will need to be adjusted when time goes from daylight savings time
5. WWW ORKOTADIGITAL COM INSTALLATION AND OPERATION MANUAL FOR MCH GPS 17 GPS Compass and Ambient Temperature Gauge KIT INCLUDES MCH GPS17 GAUGE x1 MANUAL x1 SWITCH x1 WIRE TIES x6 GAUGE FEATURES 1 2 i RINA i lt l TEMP 3 O SENSOR 4 REAR GND 1 Signal indicator shows the strength of the received GPS signal 2 Temperature reading displays the temperature read from the sensor 3 Heading reading displays the direction the gauge is moving in 4 Message center can be set to display altimeter clock or toggle between both readings 5 Switch connector location to connect switch for use in gauge setup 6 Gauge connector location to connect stock gauge harness for gauge power and temp sensor 1 MAN 650466 INSTALLATION Remove the outer fairing and the factory Air Temp gauge This will vary by model please follow the service manual to expose the wiring and gauges Don t be alarmed by the amount of wires behind the fairing this is a direct plug in kit and these detailed instructions will guide you through installation With the Air Temp gauge removed slide the push button harness through the fairing at the top opening of the mounting basket and bring the factory 3 pin connector through the fairing at the bottom opening of the mounting basket The top and bottom openings are shown with arrows in the picture Connect the factory 3 pin connector and the switch harness to the LCD compa
6. bike is in a building parking garage or if it is parked very close to large structures Move the bike into a more open location Gauge can not be enclosed in metal casing as this can block the GPS signals Contact Dakota Digital technical support for an RMA number to return gauge for service Check the temp sensor wire for connection Check the temp sensor ground connection Check temp sensor wires for pinched areas rubbed off or missing insulation Use the setup menu to set the hour offset for your local time zone Use the setup menu to adjust the hour offset for the current time Due to many varying rules of the observance of DST in different areas this adjustment can not be done automatically See setup for contrast adjustment See setup for backlight adjustment Phone 605 332 6513 Fax 605 339 4106 dakotasupport dakotadigital com Copyright 2013 Dakota Digital Inc MAN 650466
7. of the MOVEMENT of the gauge itself This is different from a conventional magnetic compass which uses the earth s magnetic field to determine direction Using GPS signals for compass heading has several benefits over the magnetic method First the orientation of the gauge is not critical to get a correct heading reading The GPS compass will read correctly even if it is mounted at an angle to the ground or the bike itself which can often be the case in a motorcycle Second the GPS compass will not be affected by the bending of the magnetic field due to close by metallic objects like the handle bars or motorcycle frame or other magnetic fields from wires or speakers Third the GPS compass will not need to be calibrated after it is installed which is often the case for a magnetic compass It is important to note however that the GPS compass MUST BE MOVING in order to get an accurate direction reading If the gauge is at a standstill it will display the last direction calculated when it was moving which may or may not be the direction the vehicle is now pointed Once the gauge is again moving a new direction can be calculated and displayed POWERING UP When the gauge is powered on it must first locate the satellites and determine its location This can take some time especially if it has been a while since the gauge was last powered up It can take up to a full minute depending on the current position of the satellites and last power on
8. ondition be proven defective in material or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE such defect s will be repaired or replaced at Dakota Digital s option This warranty does not cover nor extend to damage to the vehicle s systems and does not cover removal or reinstallation of the product This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other expressed warranties or liabilities Any implied warranties including any implied warranty of merchantability shall be limited to the duration of this written warranty Any action for breach of any warranty hereunder including any implied warranty of merchantability must be brought within a period of 24 months from date of original purchase No person or representative is authorized to assume for Dakota Digital any liability other than expressed herein in connection with the sale of this product 5 MAN 650466 TROUBLESHOOTING Problem Screen reads INTERNAL BATTERY VOLTAGE IS LOW after bike storage Screen reads INTERNAL BATTERY VOLTAGE IS LOW even after several longer rides Screen reads LOCATING for a long time after power up OR Signal indicator shows few or no bars Screen reads LOCATING with no dots following it at power up Temperature section of screen
9. ss gauge ah With the switch harness connector at the top slide the gauge into the fairing with the two studs sliding through the holes of the stock mounting basket Use the provided nuts to secure the gauge to the mounting basket One extra nut is provided in case one is lost Use the provided zip ties to secure the switch to your desired location You shouldn t need to access the switch after going through the operation and setup of the LCD compass so you can secure the switch up inside the fairing or you can secure the switch making it accessible under the fairing after reassembly if you want to change the backlighting or settings later on 2 MAN 650466 OPERATION HOW IT WORKS The MCH GPS17 uses the same GPS Global Positioning System signals that many common navigation systems use to determine location in the world This location data is used to determine your motorcycle s direction of travel Altimeter height above sea level and time data is also available from these signals and either or both can be displayed on the MCH GPS17 To function properly the GPS receiver in the gauge must have a clear view of the satellites in the sky to receive the correct signals This view can be blocked if the gauge is in a building or parking garage or in underground tunnels Even going under very wide overpasses can have an effect on the signal strength The gauge s heading N NW E etc is determined by the actual direction
10. time While the gauge is locating the heading section of the gauge will be blank and the lower message center will read LOCATING until a GPS location is determined Riding while the gauge is in this state will not have any negative effect on the gauge or its location process Once the gauge has located enough satellites the heading will be displayed in the heading section and the message center will begin to show the selected data Altimeter or clock TEMPERATURE DISPLAY The upper portion of the display shows the reading from the stock temperature sensor from the bike This readout can be set to display in either Fahrenheit or Celsius through the TEMP UNIT option in the setup menu MESSAGE DISPLAY There are three options for the lower message display area Altimeter Time or toggle between Altimeter and Time This is set using the DISPLAY option in the setup menu When set to display altimeter height above sea level the reading can be in either meters or feet see ALTIM UNIT option in setup When set to display time the hour offset from UTC Coordinated Universal Time must be set for your specific location and daylight savings in order to read correctly The offset can be set in the SET HOUR option in setup When set to toggle between altimeter and time the screen will switch every 2 seconds to display either the time or the altimeter This allows both readings to be available to view over time 3
11. to standard time or vice versa DISPLAY Sets function of lower information display area ALTIMETER will display only the altimeter height above sea level in lower information section CLOCK will display only the clock in lower information screen ALT CLK TOGGLED will toggle between altimeter and clock every 2 seconds COLOR Selects backlight color of gauge from 8 colors STOCK Color designed to appear like the color of lighting in stock gauges GREEN CYAN BLUE MAGENTA WHITE RED YELLOW additional colors BRIGHTNESS Sets the backlight brightness 0 31 Backlight brightness 0 dimmest 31 is brightest TEMP UNIT Sets the unit used to display temperature reading F temperature is displayed in Fahrenheit C temperature is displayed in Celsius ALTIM UNIT Sets the unit used to display altimeter reading FT altimeter reading is displayed in feet M altimeter reading is displayed in meters INFO Displays system information may be needed for troubleshooting or tech support Press and release switch to change screens Press and hold to return to main menu Available data signal strength readings speed in MPH firmware version and time RESET Resets all settings back to the factory presets RESET ALL SETTINGS Y N asks you to verify selection of reset EXIT Leaves the setup menu 4 MAN 650466 SETTING CONTRAST Depending on the location of the gauge and the angle the gauge is viewed from the contrast setting may need to be adjusted
Download Pdf Manuals
Related Search