Pulley Cover / Guard Installation Instructions - 5-0dro
Contents
1. Odro products do not hold approval from any department of transportation DOT and may in some localities be illegal for use on the street Use them at your own risk All products must be installed by a qualified professional and periodically checked for tightness in accordance with these instructions 5 Odro Inc nor its affiliates assume any responsibility for damage or injury of any kind due to the use misuse or improper application of any merchandise by any person 5 Odro Inc nor its affiliates shall not be held liable for any indirect or consequential damages whatsoever NG Sa Copyright 2011 5 Odro Inc All Rights Reserved 1100020 Rev 3 7 2011 FIGURES Lockplate Pulley Threaded holes Figure 1 Paro Figure 3 Figure 4 Figure 5 Disclaimer Motorcycling is an inherently dangerous activity which can result in serious injury or even death 5 Odro products are intended for closed competition or show use only 5 Odro products do not hold approval from any department of transportation DOT and may in some localities be illegal for use on the street Use them at your own risk All products must be installed by a qualified professional and periodically checked for tightness in accordance with these instructions 5 Odro Inc nor its affiliates assume any responsibility for damage or injury of any kind due to the use misuse or improper application of any merchandise by any person 5 Odro Inc nor its affiliates s2. Pulley Cover Guard Installation 1 Remove the two right rear bolts from the chin Thank you for purchasing the 5 Odro Front Pulley spoiler to allow for access to the OEM pulley Cover Guard This cover guard assembly was custom cover fasteners designed to fit your XB Series Buell Motorcycle The following was developed as a preferred method for 2 Remove the OEM front pulley cover per the Buell installation of your 5 Odro Front Pulley Cover Guard onto service manual your Buell XB series motorcycle 3 Remove the two bolts that hold the lockplate A WARNING Improper use of this product could down on the pulley DO NOT REMOVE THE result in property damage serious injury or LOCKPLATE See Figure 1 Place one drop of death the supplied thread locker item I onto the end of each of the two 1 long screws item D Pass g them through the pulley cover item A the 3 8 A WARNING Use of loose clothing or laces while thick spacers item C and thread them through operating your motorcycle with this product the lockplate and into the threaded holes on the installed is strongly discouraged Doing so could pulley where the bolts were removed from See result in property damage serious injury or Piguicee Torque per lable A death 4 Place one drop of the supplied thread locker item 1 onto the end of the male threads of the long Table A Contents amp Torque stand off pass i
3. hall not be held liable for any indirect or consequential damages whatsoever Copyright 2011 5 Odro Inc All Rights Reserved 1100020 Rev 3 7 2011
4. t through the 1 5 O D washer item F and thread it into the threaded hole aft se Torque the pulley See Figure 3 Torque per table A Item Description Qty in lb N m A__ Pulley cover 1 5 Place one drop of the supplied thread locker item B__ Pulley guard 1 1 onto the end of the male threads of the short C__ 3 8 thick spacers 2 stand off and thread it into the upper threaded D 1 long screws 2 120 13 55 hole in front of the pulley See Figure 4 Torque E Long stand off 1 120 13 55 per table A E S O D wasner 6 Pl drop of th lied thread locker it G Short stand off 1 120 13 55 Place one drop of the supplied thread locker item H a 3 75 85 1 onto the end of each of the three 1 2 long z z screws item H Pass them through the pulley Mec Strength thread l cker tube l guard item B and thread them into the threaded ser instructions holes on the stand offs items E amp G and on the K i 5 0dro decals 2 s motorcycle as shown See Figure 5 Torque per Do not overtighten table A K 7 Re install the chin spoiler per the Buell service manual The installation of your 5 Odro Front Pulley Cover Guard is now complete We hope that you enjoy your product Please contact us at info 5 Odro com with any questions you may have Disclaimer Motorcycling is an inherently dangerous activity which can result in serious injury or even death 5 Odro products are intended for closed competition or show use only 5
Download Pdf Manuals
Related Search