Old-School Method of Flushing Still the Best
Contents
1. g z Old School Method of Flushing Still the Best All Power Steering equipped vehicles Problem After replacing power steering components there is a lack of assist intermittent assist problems or noisy operation Cause System not completely flushed of all debris and contamination Time is money that s why there are so many of the new mechanical flush systems in use today They are fast efficient and labor saving There are however still important advantages in flushing the system the old fashioned way by rotating the pump and turning the steering wheel side to side While mechanical flush systems get the job done most simply pull the old fluid from the power steering pump reservoir while sometimes using a cleaning agent and then replace it with new fluid The old school method of cranking the engine to spin the pump while also turning the steering wheel is most effective because it stirs up debris that needs to be flushed away For additional information on this flushing method see ProTech PT 20 0012 No matter what method you use to flush the system always install an in line filter and be sure to replace any hydraulic hose that is damaged or shows signs of age or failure After flushing be sure to replace the fluid with OE approved or equivalent fluid For hose recommendations see PT 20 0004 0016 For filter options refer to PT 20 0003 For information on fluids see PT 20 0027 G2 Filter 20 0038F Please refer to2. your vehicle s service manual for specific diagnostic instructions This ProTech bulletin is supplied as technical information only and is not an authorization for repair For other ProTech publications visit www cardone com CARDONE Industries Inc 5501 Whitaker Ave Philadelphia PA 19124 1799 JDBO351 PT 20 0030
Download Pdf Manuals
Related Search