Network Services
Contents
1. or Call Waiting is subscribed If Voice Mail Service Call Forwarding Service or Call Waiting is not subscribed calls cannot be answered during a call Set arrival actions to Activate to use Arrival call action E Available actions Voice Mail Calls received while engaged in a call are automatically forwarded to the Voice Mail Service center Messages are stored regardless of Voice Mail Service settings Call Calls received while engaged in a call are automatically forwarding forwarded to the Call Forwarding Service center Voice calls received while engaged in a call are automatically forwarded regardless of Call Forwarding Service settings Call Calls received while engaged in a call are automatically Rejection rejected Answer Follows Call Waiting settings if set to Activate If set to Deactivate one of the following applies Disconnect the current call and answer an incoming call Manually connect incoming calls to Voice Mail Service Call Forwarding Service or reject Voice Mail Service and Call Forwarding Service settings are used if set to Activate To use Call Waiting set Arrival Call Act to Answer No matter the Arrival call action setting if a call is received while engaged in another call it is saved in Received calls f SODIAIOS YIOMJON 433 J SODIAIOS YIOMJON 434 Using the service 1 In the Custom m2. Copy from the FOMA card to the A FOMA terminal handset SMS only PushTalk Send Number A Not available Number A Receive Available with Number A PushTalk phonebook Can be displayed Cannot be displayed Can be displayed i ppli All available Partially available 10 Partially available 11 Own number Number A and Address A Number B and Address B Number A and Address A Number B and Address B 1 At defau made from Number B when the phonebook whose Phonebook 2in1 set is set to B 2 Inthe setting of Accept calls phone numbers of the phonebook which is displayed in the used mode are received phone numbers of the phonebook saved in other modes and not displayed are rejected 3 In the setting of Reject calls phone numbers of the phonebook which is displayed in the used mode are rejected phone numbers of the phonebook saved in other modes and not displayed are received 4 In the setting of Reject unknown phone numbers of the phonebook other than the one which is displayed in the used mode are rejected phone numbers of the phonebook saved in other modes and not displayed are rejected 5 Set secret is available regardless of Phonebook 2in1 set t calls are made from Number A when the phonebook whose Phonebook 2in1 set is set to A and Common is used Calls are 6 T 8 9 This is a function that compares the items caller s receiver s number voice Videophone call sender s receiver s number
3. select the saving method gt gt select a phone number gt gt Yes Select a phone number to register Select Delete all entries gt Yes Select Delete last entry gt Yes The last saved number is deleted Repeat this operation to delete numbers individually from the last saved number Select Check No of entries Use Delete all entries or Delete last entry to delete phone numbers Deleting only specified numbers cannot be performed Caller ID request Using Caller ID Request Service Caller ID Request Service is a service for playing Caller ID Request for voice Videophone calls without caller ID and disconnecting the calls automatically When calls are not received with the Caller ID Request Service the calls are not saved in Received calls and the stock icon missed call does not appear When PushTalk is received without caller ID a message is not played and the call is disconnected E Responses when other services are active The following actions are taken when Caller ID Request Service is set to Activate along with the various services Response Caller ID request message is played Message is not recorded Caller ID request message is played Call is not forwarded Service Voice Mail Service Call Forwarding Service Call Waiting Caller ID request message is played Nuisance Call Blocking Rejection message is played when Service calle
4. SMS sender s receiver s address Mail with the phonebook in which the items are saved and converts the items to the names of the phonebook and displays the names A in Phonebook 2in1 set is made valid if the sender s terminal does not support the 2in1 setting In the Dual mode a destination address for new mail can be selected from the phonebook whose Phonebook 2in1 set is set to B as well However the new mail is sent from Address A A is made valid if the sender s terminal does not support the 2in1 setting 10 Message applications mail applications and applications set to the stand by are excluded 11 Applications set to the stand by are excluded a SODIAIOS YIOMJON 439 J SODIAIOS YIOMJON 440 Using OFFICEED OFFICEED is the in group flat rate service offered with a specified IMCS Inbuilding Mobile Communication System Using this service requires a separate subscription Refer to the DoCoMo website for corporations http www docomo biz d 212 for further information X The OFFICEED is only available in Japanese Using additional services Save and use new DoCoMo network services when they are added Save these new service special numbers or codes on the FOMA terminal When there is a service code it is saved as a USSD on the FOMA terminal Using the service 1 In the Custom menu select Settings gt Other NW Services gt Additional service gt USSD 2 Select the
5. cannot be sent WEB mail site Mail from Address B Mail from Address A 8 SMS from Number A WEB mail site Mail from Address B Service A mode B mode Dual mode Mail SMS Receive Receives mail that is addressed to Receives mail that is addressed to Receives mail that is addressed to Address A SMS that is addressed Address A SMS that is addressed to Address A SMS that is addressed to Number A The terminal rings Number A The terminal does not ring to Number A The terminal rings Receives mail a new mail notice e Receives mail a new mail notice e Receives mail a new mail notice and alarm notice that is addressed and alarm notice that is addressed and alarm notice that is addressed to Address B and saved in the to Address B and saved in the to Address B and saved in the FOMA terminal Also receives SMS FOMA terminal Also receives SMS FOMA terminal Also receives SMS that is addressed to Number B that is addressed to Number B that is addressed to Number B The terminal does not ring The terminal rings The terminal rings Receiving all entries from Ir exchange iC m ransmission Bluetooth communication Copy the status of the sender Receiving one entry from Ir exchange iC A ransmission Bluetooth communication Copy to microSD Card Copy all entries single entry selected entries all entries in a folder A Copy from the FOMA terminal handset A o the FOMA card SMS only
6. 1 setting when saving a new entry i A B IA Receiving elleniies rom IrexchangeliC Copy the Phonebook 2in1 setting of the sender 7 ransmission Bluetooth communication Receiving one entry from Ir exchange iC ransmission Bluetooth communication IA B A Copy to microSD Card Copy single entry all entries in a group all entries selected entries Common for the Phonebook 2in1 setting Copy from FOMA terminal handset P o FOMA card Common for the Phonebook 2in1 setting Copy from FOMA card to FOMA erminal handset IA B A Redial Display Number A outgoing call Number B outgoing call All outgoing call Co Display Number A incoming call Number B incoming call All incoming call Mail SMS Display Mail sent or received with Address FOMA terminal FOMA terminal A Mail that is received with Address Mail sent or received with Address SMS sent or received with Number B and saved in the FOMA terminal A and mail that is received with A mail for which SAR ICR is Address B and saved in the FOMA selected on the WEB mail site terminal Also displays a new mail Also displays a new mail notice and notice and alarm notice alarm notice SMS sent or received with Number A SMS received with Number B SMS received with Number B WEB mail site WEB mail site Mail sent or received with Address B Mail sent or received with Address B Send FOMA terminal FOMA terminal FOMA terminal Mail from Address A SMS from Number A Mail SMS
7. Network Services Using Voice Mail Service lt Voice Mail Service gt 426 Using Service numbers lt Service number gt 433 Using Call Waiting 2 0 20 00 ee lt Call Waiting gt 428 Selecting actions for incoming calls during a call lt Arrival Call Act gt 433 Using Call Forwarding Service lt Call Forwarding Service gt 429 Activating Deactivating arrival actions lt Set arrival act gt 434 Using Nuisance Call Blocking Service Setting remote control lt Remote control gt 434 E E E nes Ree Baas lt Nuisance Call Blocking Service gt 430 Using Multi Number lt Multi Number gt 434 Using Caller ID Request Service lt Caller ID request gt 431 Using 2104 224 cece cFe Bee Se aee Seee eaeadeweawaned lt 2in1 gt 435 Using Dual Network Service lt Dual Network Service gt 432 Using OFFICEED ccatag boas bad ancdeee lt OFFICEED gt 440 Switching the guidance language lt English guidance gt 432 Using additional services lt Additional services USSD gt 440 Available network services Use the following network services on the FOMA terminal Service name Subscription Monthly fee Service name Subscription Monthly fee Service name Subscription Monthly fee Voice Mail Service Necessary Fees apply Public mode Drive mode Not necessary Free Multi Number Necessary Fees apply Call Waiting Necessary Fe
8. ber1 and Additional Number2 besides Basic Number on the FOMA terminal Multi Number settings name phone number etc registered in the FOMA terminal may be deleted when a FOMA card is removed or replaced In such cases register again A registered name appears according to each Multi Number Basic Number Additional Number1 Additional Number2 on the screen when a call is being made received When making a call from Redial or Received calls the previously used Multi Number is displayed and dialed The registered name appears in the Multi Number selection screen when calling or the incoming call screen Using the service 1 In the Custom menu select Settings gt Other NW Services Multi number 2 Select the service Select Set multi number gt select a phone number to use gt gt Yes Set a phone number to use Select Check setting Select Number setting gt Additional No1 Additional No2 gt enter a name gt gt enter a phone number gt gt select a ring tone gt e Register Multi Numbers e Enter up to 14 single byte 7 double byte characters for a name and 26 digits for a phone number Calling from the selected phone number 1 In stand by enter a phone number 6 gt Sel Multi number 2 Select a phone number to use gt Phone V phone Even if the submenu is displayed in the phonebook Redial or Received calls details screen the
9. ce with Chara den the DTMF operations become unavailable Switch the DTMF mode to ON from the Submenu iP 67 When the 2in1 mode is set to Dual mode select Number A or Number B to activate deactivate Voice Mail Service play messages or set Voice Mail Service Call Forwarding Service is set to Activate Voice Mail Service is stopped automatically Basic flow STEP 1 Activate Voice Mail Service STEP 2 Voice Videophone call is received STEP 3 Call is connected to Voice Mail Service center if not answered STEP 4 Caller records a message STEP 5 Play back message Using the service 1 In the Custom menu select Settings gt NW Services gt Voice Mail 2 Select the service Select Check messages Select Play Messages Yes gt operate according to the voice guidance Select Activate VoiceMail Activate VoiceMail Yes Select Activate VoiceMail Ring time start gt enter the ringing time gt gt Yes e Set the ringing time before activating Voice Mail Service Select Set ring time gt enter the ringing time gt Select Deactivate VoiceMail gt Yes Select Check setting Select Voice Mail setting gt Yes gt operate according to the voice guidance Select Notification setting gt Voice Mail alarm gt select the setting gt e Set the alarm to sound when a new message is stored Select Notification setting gt Delete
10. d The ring tone sounds for the set ringing time can be changed t P 430 when Call Forwarding Service is set to Activate Answering during the set ringing time connects calls Calls are automatically forwarded to the set destination after the set time passes Forwarded calls are noted in stand by and Received calls However when ringing time is set to 0 seconds calls are not saved in Received calls Collect calls receiver accepts charges are not connected when Call Forwarding Service is set to Activate Calls received while engaged in a call can be automatically forwarded Call Forwarding is automatically deactivated if Voice Mail Service is set to Activate Setting Call Forwarding Service from the FOMA terminal is not available from outside the service area In such cases access Call Forwarding Service from touch tone landline phones and payphones using network security code Remote control must be set to Activate in advance When the 2in1 mode is set to Dual mode select Number A or Number B to activate deactivate Call Forwarding Service STEP 1 Register forwarding destination STEP 2 Activate Call Forwarding Service STEP 3 Voice Videophone call is received STEP 4 Call is automatically forwarded to the destination if not answered Call Forwarding Service fees Caller J Charged to caller Call Forwarding Service subscriber J Charged to Call Forwarding Servic
11. d by a rejected nuisance number Using the service Inthe Custom menu select Settings gt NW Services gt Caller ID request 2 Select the service Select Activate gt Yes Select Deactivate gt Yes Select Check setting i SODIAIOS YIOMJON 431 UJ SODIAIOS YIOMJON 432 Using Dual Network Service A mova terminal is available with a phone number registered for the FOMA terminal FOMA and mova can be switched depending on the service area FOMA and mova terminals cannot be used simultaneously Enter a four digit number for the network security code IP 128 E Switching Dual Network Service FOMA network mova network Switches to FOMA network if switched with FOMA terminal eee Switches to mova service network if switched with mova terminal Same phone number FOMA terminal mova terminal Certain services are restricted Switch using unavailable terminals for the Dual Network Service Using the service 1 Inthe Custom menu select Settings gt Other NW Services Dual network 2 Select the service Select Switching gt enter the network security code gt gt Yes Select Status request English guidance Switching the guidance language Change into English the guidance language for network service settings such as Voice Mail Service and the voice guidance notifying that the handset is outside the service area f caller
12. de gt gt Set call receive No gt Disp Call Rcv No gt ID display ON lt Number B Ring tone gt Set the ring tone for when a call is received with Number B or mail is received with Address B 1 In the Custom menu select Settings gt NW Services gt 2in1 setting 2 Enter the terminal security code gt gt Set call receive No Number B Ring tone 3 Select an item gt gt Settings 4 Select a ring tone gt For details on selecting Number B ring tone t amp step 3 of Changing the ring tone on P 108 For User unset calls the normal Select ring tone is followed regardless of Number B Ring tone Deactivating 2in1 lt 2in1 function OFF gt Inthe Custom menu select Settings gt NW Services gt 2in1 setting 2 Enter the terminal security code gt gt 2in1 function OFF gt Yes When a change for the Number B of 2in1 or a FOMA card exchange 2in1 subscriber gt 2in1 subscriber is performed use any of the following methods to obtain the correct Number B m Set 2in1 function OFF and then perform 2in1 setting again to set 2in1 function ON m Check the 2in1 subscription When a FOMA card exchange 2in1 subscriber 2in1 nonsubscriber is performed set 2in1 function OFF Restricting calls lt Receive avoidance gt Restrict calls of Number A and Number B In conjunction with the mode of 2in1 set to accept only calls of Number A in the A mode a
13. display gt Yes Stock icons disappear Alternatively select the stock icon and press for 1 seconds to delete them Select Notification gt Start notification gt select the setting of call without caller ID gt gt Yes Select Notification gt Stop notification gt Yes Select Notification Status Notification Checking messages If there are new messages of voice call the stock icon t voice mail appears When a Videophone message is received an SMS informing that a new message is recorded is received Playing back messages While a stock icon appears select the stock icon to play back messages Number that appears is the number of new messages notified by guidance when playing back Saved messages are not included Videophone messages can be played back by making a Videophone call to 1417 Starting Voice Mail Service When 2in1 mode is set to B mode Ring time start cannot be selected Set the ringing time in Set ring time When 2in1 mode is set to Dual mode and Ring time start is selected the confirmation screen stating that the ringing time is set with Number A Checking the Voice Mail Service setting When the 2in1 mode is set to Dual mode or B mode select which settings of Number A or Number B to check Missed call notification SMS notifies missed calls received while the handset is outside the servic
14. e area in the Self mode or turned off Missed calls are notified even if Reject all SMS is set a SODIAIOS YIOMJON 421 G SODIAIOS YIOMJON 428 Using Call Waiting Call Waiting is a service for placing the current call on hold and answer a new incoming call when the handset beeps during a call to notify you of another call In addition place the current call on hold and make a new call To use Call Waiting set Arrival call action 1 P 433 to Answer in advance If set differently answering a new incoming voice call during a voice call is not available even if Call Waiting is activated Using the service 1 In the Custom menu select Settings gt NW Services gt Call waiting 2 Select the service Select Activate gt Yes Select Deactivate gt Yes Select Check setting Charges are incurred by a caller even when the call is on hold Placing the current voice call on hold and making a voice call to another party is possible even when Call Waiting is deactivated Answering a voice call during a call Place the current call on hold and answer a voice call 1 When a beeping tone is heard during a call press A The original call is automatically placed on hold and an incoming call is connected To switch between callers Press 7 To disconnect the current call Press gt Disconnect When a Videophone call is received during a voice call the in call rin
15. e subscriber Forwarding destination Operations for setting destination activating and deactivating are not charged i SODIAIOS YIOMJON 429 J SODIAIOS YIOMJON 430 Using the service 1 In the Custom menu select Settings gt NW Services gt Call forwarding 2 Select the service Select Activate gt Forwarding number gt enter a phone number gt e Register a forwarding number Select Activate gt Set ring time gt enter a ringing time gt e Set a ring time Select Activate gt Activate gt Yes Select Deactivate gt Yes Select Register number gt change the phone number gt gt select an item gt Select Forwarding No busy gt select the setting gt Select Check setting Activating Call Forwarding Service When 2in1 mode is set to B mode Forwarding number or Set ring time cannot be selected Calls are automatically forwarded without sounding the ring tone while the handset is outside the service area in the Self mode or turned off Answer while the ring tone is ringing to connect a call Changing the forwarding destination When 2in1 mode is set to B mode Change activate cannot be selected When 2in1 mode is set to Dual mode and Change activate is selected the confirmation screen stating that the forwarding destination is changed with Number A Checking the Call Forwa
16. enu select Settings gt NW Services gt In call arrival act gt Arrival Call Act 2 Select an arrival action gt Activating Deactivating arrival actions Set arrival actions to Activate to receive another voice call according to Arrival Call Action 1 P 433 during a call Using the service 1 Inthe Custom menu select Settings gt NW Services gt In call arrival act gt Set arrival act 2 Select the service Select Activate gt Yes Select Deactivate gt Yes Select Check setting Setting remote control Set Voice Mail Service or Call Forwarding Service remotely from touch tone landline phones payphones and DoCoMo mobile phones Remote control is also available from outside the FOMA service area To perform remote operations set Remote control to Activate in advance To use network service overseas set Remote control to Activate Using the service 1 Inthe Custom menu select Settings gt Other NW Services Remote control 2 Select the service Select Activate gt Yes Select Deactivate Yes Select Check setting E Accessing network services from other phones For details on operating Network services from a payphone and others refer to Mobile Phone User s Guide Network Services MuttiNumber Using Multi Number Multi Number is a service for using up to two phone numbers Additional Num
17. es apply Public mode Power OFF Not necessary Free 2in1 Necessary Fees apply Call Forwarding Service Necessary Caller ID Request Service Not necessary Free OFFICEED Necessary Fees apply Nuisance Call Blocking Service Not necessary Dual Network Service Necessary Fees apply Melody Call Necessary Fees apply Notify Caller ID Service Not necessary English Guidance Not necessary Free Deactivate does not mean that the Voice Mail Service Call Forwarding Service or other subscriptions are canceled Network services are not available outside the service area or in a place with no signal OFFICEED is a service that requires subscription Refer to the DoCoMo website for corporations http www docomo biz d 212 for further information Add services to the menu when new network services become available from DoCoMo 1 P 440 This manual explains the outline of each network service based on the operation using the FOMA terminal menu Refer to Mobile Phone User s Guide Network Services for details For subscription and inquiries contact the number listed in General Inquiries on the back of this manual 425 WJ SODIAIOS YIOMJON 426 Voice Mail Service Using Voice Mail Service Voice Mail Service is a service for answering incoming voice Videophone calls with Replay message and recording callers messages when the handset is outside the service area or turned off
18. g tone is not heard and the incoming call cannot be answered The stock icon appears when a call is ended and the stand by display reappears Disconnecting a call to answer an incoming call Disconnect a call and answer an incoming call 1 When a beeping tone is heard during a call press 5 The ring tone for an incoming call sounds 2 Press 7 The incoming call is connected UEL EES EELCK UE UL alave EK Place the current call on hold and make a separate call 1 Dial another party s phone number during a call and press 4 The original call is automatically placed on hold To switch between callers Press 4 Call Forwarding Service Using Call Forwarding Service Call Forwarding Service is a service for forwarding voice Videophone calls to designated phone numbers when the handset is outside the service area or turned off or when calls are not answered within set ringing time To prioritize Call Forwarding Service when Record message iP 77 is also set set the ringing time for Call Forwarding Service shorter than the answering duration for Record message f a voice Videophone call is not answered when Call Forwarding Service is set to Activate the call is saved as Missed call in Received calls and the stock icon missed call appears in stand by For Videophone calls the forwarding guidance is not played The caller sees a message that the call is being forwarde
19. nd only calls of Number B in the B mode and calls of both Number A and B in the Dual mode Also set Receive avoidance from abroad Inthe Custom menu select Settings gt NW Services gt 2in1 setting 2 Enter the terminal security code gt gt Receive avoidance 3 Set the receive avoidance Select Change rcv avoid select the number field to avoid gt select the setting gt gt gt Agree Select Check rcv avoid gt Yes gt Agree Select Mode link setting gt Yes gt Agree Set Mode link to Activate Deactivate Select Rcv avoid abroad gt Yes gt operate according to the voice guidance Set Receive avoidance overseas Mode link setting Mode link setting is set to Activate the modes cannot be switched outside the service area i SODIAIOS YIOMJON 437 UJ SODIAIOS YIOMJON 438 Using functions in each mode The following functions operate differently depending on the mode used Functions that operate in the same way as the A mode are excluded Service A mode B mode Dual mode Voice Making a call Number A Number B Selectable when making a call 1 Videoph ivi ie one Receiving a call All Can be restricted with Receive avoidance 2 3 4 Phonebook 5 Display A and Common B and Common All Converting a name 6 A and Common B and Common All Phonebook 2in
20. or when calls cannot be answered To prioritize Voice Mail Service when Record message IP 77 is also set set the ringing time for Voice Mail Service shorter than the answering duration for Record message f a voice Videophone call is not answered when Voice Mail Service is set to Activate the call is saved as Missed calls in Received calls and the stock icon missed call appears in stand by Record up to 20 messages respectively for voice and Videophone calls with approximately 3 minutes of recording time per message Messages are saved for up to approximately 72 hours Ring tone sounds for the set ringing time can be changed 1 P 427 when a call is received while Voice Mail Service is set to Activate Answering during the set ringing time connects calls Calls are automatically forwarded to Voice Mail Service center after set time Forwarded calls are noted in stand by and Received calls However when ringing time is set to 0 seconds calls are not saved in Received calls If a Videophone call is received when Voice Mail Service is set to Activate the call is connected to Voice Mail Service and recording message is activated after the set ringing time passes Answering during the set ringing time connects calls without connecting to Voice Mail Service Make a voice call to 1412 to change the Videophone call settings of Voice Mail Service When a call is connected to Voice Mail Servi
21. phone number can be selected When the 2in1 is used Multi Number cannot be used Editing Deleting Multi Number 1 In the Custom menu select Settings gt Other NW Services gt Multi number gt Number setting 2 Select a number gt gt select an item Select Edit gt edit a Multi Number Editing procedures are the same as when saving IP 435 Select Delete gt Yes Using 2in1 2in1 is a service that two phone numbers and two mail addresses can be used on one mobile phone with dedicated mode function as if two different mobile phones are used Available operations are calling from your phone number Number A sending receiving i mode mail Address A and viewing related information Available operations are calling from the 2in1 phone number Number B accessing to sites for which WEB mail Address B can be used and viewing related information A mode B mode Dual mode Available operations are those of both the A and B modes Use Address B to exchange mail at the dedicated WEB mail site Packet transmission is available even in the B mode if i mode is subscribed For details on using functions in each mode tF P 438 Refer to Mobile Phone User s Guide 2in1 for details on 2in1 Starting to use 2in1 lt 2in1 setting gt Inthe Custom menu select Settings gt NW Services gt 2in1 setting In stand by Press for 1 seconds When
22. rding Service settings When the 2in1 mode is set to Dual mode or B mode select which settings of Number A or Number B to check Setting Call Forwarding guidance 1 In stand by press DOSA A Set according to the voice guidance Using Nuisance Call Blocking Service Register phone numbers for nuisance calls such as prank calls When numbers are registered for the Nuisance Call Blocking Service calls are automatically rejected and a guidance answers them A ring tone does not sound when calls are received from registered numbers In addition the calls are not saved in Received calls Reject callers with no ID International calls may not be rejected E Responses when other services are active The following actions are taken when various services are activated Service Response Voice Mail Service Rejection message is played Message is not recorded Call Forwarding Service Rejection message is played Call is not forwarded Call Waiting Rejection message is played Caller ID Request Service Rejection message is played When a PushTalk call is received a guidance message is not played to the other party and the call is disconnected Using the service 1 In the Custom menu select Settings gt NW Services gt Bar nuisance calls 2 Select the service Select Register caller gt Yes e Register the last caller Select Register selected No
23. service Select a number to save gt Edit gt enter a service name gt gt enter the special number service code Enter up to 20 single byte 10 double byte characters for a service name Select a service gt Save up to ten new DoCoMo network services Deleting registered services 1 In the Custom menu select Settings gt Other NW Services Additional service gt USSD 2 Select a service 3 Select the deletion method Select Delete one Select Delete all gt enter the terminal security code gt 4 Select Yes Changing the receive display for saved service lt Reply message gt Inthe Custom menu select Settings gt Other NW Services Additional service gt Reply message 2 Select the receive display gt 4 3 Edit Select Edit gt enter a receive display name gt gt enter the special number service code gt Select Delete one gt Yes Select Delete all gt enter the terminal security code gt gt Yes
24. subscribes to this service caller s settings are prioritized Available guidances Menu item Details Outgoing Played Japanese All guidances are in when setting network Japanese services English All guidances are in English Incoming Played Japanese All guidances are in when called Japanese Japanese English guidance follows English Japanese guidance English Japanese guidance follows Japanese English guidance Using the service 1 In the Custom menu select Settings gt Other NW Services gt English guidance 2 Select the service Select Guidance setting gt select the guidance type gt gt select the language gt Select Check setting Using Service numbers Calls can be made to Repair inquiries and General inquiries Items may appear differently or may not appear depending on the FOMA card to be used KIERES Repair inquiries Calls can be made to Repair inquiries FIERARA Ff Calls can be made to General inquiries General inquiries 1 In the Custom menu select Settings gt Other NW Services gt Service number 2 Select an item gt gt Yes When the 2in1 mode is set to Dual mode select Number A Number B in the selection screen before calling Selecting actions for incoming calls during a call Select actions for voice calls received during a voice call if Voice Mail Service Call Forwarding Service
25. the 2in1 is used the 2in1 mode is switched 2 Enter the terminal security code gt When the 2in1 has already been used the 2in1 setting menu screen appears 3 Select Yes a SODIAIOS YIOMJON 435 u SODIAIOS YIOMJON 436 Switching modes lt Mode switching gt 1 In the Custom menu select Settings gt NW Services gt 2in1 setting In stand by Press for 1 seconds 2 Enter the terminal security code gt 3 Select Mode switching gt select the mode gt E Selecting a phone number to call when the Dual mode is set 1 In stand by enter a phone number 6 gt Select 2in1 2 Select a phone number to call gt Phone V phone Even if the submenu is displayed in the phonebook Redial or Received calls details screen the phone number can be selected Setting the mode to be registered in the phonebook lt Phonebook 2in1 set gt Available phonebook is automatically switched depending on the mode of the 2in1 In the mode of 2in1 when entries are saved to a phonebook the Phonebook 2in1 setting is saved and can be changed in the following way 1 In the Custom menu select Settings gt NW Services gt 2in1 setting 2 Enter the terminal security code gt gt Phonebook 2in1 set 3 Select the setting method Select Selection setting gt select a name repeatable gt 6 Select Collective grp set gt select a group gt Select Set
26. to all 4 Select the setting to register gt f B is set to a phone number saved in the PushTalk phonebook a message stating that PushTalk transmission cannot be sent appears When saving to FOMA card phonebook the mode is set to Common and cannot be changed even if saving with any modes Setting the stand by display for each mode lt Stand by display gt Set the stand by displays of Dual mode and B mode Inthe Custom menu select Settings gt NW Services gt 2in1 setting 2 Enter the terminal security code gt gt Stand by display 3 Select an item gt gt Settings Select an image gt gt Yes Use JPEG GIF images animated GIF and Flash movies in My picture of Data box i motion and i appli are not available Even if i appli stand by is set when the mode of 2in1 is set to B mode or Dual mode it cannot be set to the stand by display of B mode or Dual mode It is set to the stand by display of A mode Setting the color scheme of the call receive display of Number B lt Disp Call Rcv No gt In order to differentiate the calling receiving of Number B the phone number the name saved in the phonebook or the reason of non disclosure can be displayed in gray on the call receive screen or voice call screen regardless of Color theme setting 1 Inthe Custom menu select Settings gt NW Services gt 2in1 setting 2 Enter the terminal security co
Download Pdf Manuals
Related Search