SL125-RC Series - Sealite Pty Ltd
Contents
1. Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Assembly amp Installation of Radio Controller The installation of the Radio Controller includes the following steps e Unpacking e Initial Inspection e Assembling amp Charging the Radio Controller e Using the Radio Controller Unpacking instructions Unpack all hardware and verify container contents in accordance with Figs 3 0 amp 3 1 Please contact your Sealite office if there is any hardware missing Initial inspection Inspect the Radio Controller for damage If there is any damage please contact your Sealite Office Retain original packing material for possible future use Assembly amp Charging The Radio Controller can be activated after raising the aerial into the upright position It may be necessary to charge the Radio Controller before use Turning the unit On To turn the unit on lift the red missile cover and flick the switch The radio controller will take 5 seconds to start up and it may take up to 30 seconds for the embedded RF Module to be configured before a command can be sent Charging the Radio Controller a Unscrew the protective cap from the charging port on the left side of the Radio Controller see Fig 3 0 Insert the charging terminal into the Radio Controller Plug the charger into a wall socket and turn the charger on The light on the charger will flash Green Orange Red then back to2. www sealite com 4m K w SL125 RC Series 5 9nm LED Marine Lantern amp Radio Control System Installation amp Service Manual Version 1 1 www sealite com SL125 Series 5 9nm LED Marine Lantern LED lens and Sealite s af mm 2 360 Omnidirectional EU Automatic night LED Reflector M activation US Pat No 6 667 582 AU Pat No 778 918 Wii Lens and base moulded from UV stabilised LEXAN polycarbonate IP68 rating O Large industry standard 200mm OD base pattern 51125 Complete 5 9 Complete Marine Lantern Assembly SL125 C Type 1 LED lens and Sealite s 360 Omnidirectional LED Reflector US Pat No 6 667 582 i Q AU Pat No 778 918 B LR Amo ______ Lens moulded from UV stabilised LEXAN m polycarbonate ymn IP68 rating SL125 C Type 2 Adjustable solar module s angled to maximise solar collection Large user replaceable 55Ah battery in 7 stage powder coated Large industry standard Um aluminium housing Models shown with optional 200mm OD base pattern 2nd solar module Sealite SL125 RC Series CO 5 9nm LED Marine Lantern amp Radio Control System ge Le tlc Lo i CR FN RC AN ane Page 4 Operating Principle 4
3. Input voltage shall not exceed those recommended for the product 10 Warranty does not cover damage caused by the incorrect replacement of battery in solar lantern models 11 This warranty does not cover any damage or defect caused to any product as a result of water flooding or any other acts of nature 12 There are no representations or warranties of any kind by Sealite or any other person who is an agent employee or other representative or affiliate of Sealite express or implied with respect to condition of performance of any product their merchantability or fitness for a particular purpose or with respect to any other matter relating to any products Limitation of Liability To the extent permitted by section 68A of the Trade Practices Act 1974 Cth the liability of Sealite Pty Ltd under this Warranty will be at the option of Sealite Pty Ltd limited to either the replacement or repair of any defective product covered by this Warranty Sealite will not be liable to Buyer for conseguential damages resulting from any defect or deficiencies Limited to Original Purchaser This Warranty is for the sole benefit of the original purchaser of the covered product and shall not extend to any subseguent purchaser of the product Miscellaneous Apart from the specific warranties provided under this warranty all other express or implied warranties relating to the above product is hereby excluded to the fullest extent allowable under law
4. SWITCH TW OTS 4 WN 00 02 gt ww 0 gt gt FLASH CODE 1 12S 12 5 155 1 15 1 15 1 15 a 15S FLASH CODE VQ 4 4S O 4 6S O 4 6S FL 4 10 FL 4 10 4 10 FL 4 12 FL 4 12 4 12 FL 4 12 4 12 155 1 13 5 1 0 0 5 5 0 0 3 0 5 0 5 0 5 0 8 1 0 0 8 1 0 1 0 0 3 0 3 0 3 0 4 0 5 0 8 0 3 0 3 0 5 0 5 0 8 0 3 0 5 1 0 1 5 0 5 0 3 0 5 0 5 1 5 0 5 0 5 0 5 0 7 1 0 1 0 1 2 0 7 0 6 0 5 1 5 0 6 1 0 0 7 1 0 0 7 0 5 1 5 2 0 1 2 1 0 1 2 1 0 1 0 1 7 1 0 1 5 0 3 0 5 0 7 2 0 0 5 3 0 1 5 1 2 1 0 0 3 0 7 0 6 1 0 1 2 0 7 1 7 0 5 1 5 1 2 0 7 1 5 1 0 0 5 1 5 3 0 1 5 1 5 1 5 0 5 0 5 0 5 ON OFF 0 3 0 7 0 5 1 0 0 3 1 0 0 8 1 2 0 3 0 7 0 4 0 6 0 5 0 5 0 5 1 5 0 6 0 6 1 0 1 0 0 5 2 1 1 0 1 0 0 3 0 7 0 5 0 5 0 5 1 5 0 5 2 0 0 8 1 2 1 0 3 0 0 8 2 4 1 0 4 0 1 0 4 0 0 3 1 7 0 4 1 0 0 5 1 5 0 6 0 3 0 7 0 5 0 7 0 7 1 0 5 0 0 1 0 5 0 5 3 0 0 5 1 5 0 8 1 2 1 0 1 0 0 3 0 3 0 3 0 7 0 4 0 6 0 5 1 0 0 8 1 2 0 3 0 7 0 3 1 7 0 5 0 5 0 5 1 5 0 8 1 2 0 3 0 7 0 5 1 5 1 0 1 0 0 5 0 5 0 5 1 5 0 3 3 0 0 5 1 5 0 5 1 5 1 5 1 5 0 5 0 5 0 5 0 5 0 5
5. 8 158 0 5 15 20 11 0 F 8 O U 15S 0 6 03 06 03 14 11 8 9 U 155 0 7 05 07 05 19 107 1 9 O U 15S 0 7 07 07 07 24 10 1 7 D 158 1 5 0 5 0 5 05 0 5 05 05 10 5 Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Trouble Shooting Problem Lantern will not activate Ensure lantern is in darkness Wait at least 60 seconds for the program to initialise in darkness Ensure switch setting is on a valid code not unused flash code Ensure battery terminals are properly connected Ensure battery voltage is above 12volts Lantern will not operate for the Expose lantern to direct sunlight and monitor operation for several days entire night Sealite products typically reguire 1 5 hours of direct sunlight per day to retain full autonomy From a discharged state the lantern may reguire several days of operational conditions to cycle up to full autonomy Reducing the light output intensity or duty cycle flash code will reduce current draw on the battery Ensure solar module is clean and not covered by shading during the day Flash codes will not change This is a Radio Controlled light and any command must be sent from the Controller Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED
6. www sealite com 5 9nm LED Marine Lantern amp Radio Control System Setup amp Installation Setup of SL125 RC amp SL125 C RC Models 1 2 Remove the bolt lock securing the battery box lid and open unit SL125 C RC ONLY Use a large flat blade screwdriver to remove the Flash Adjustment Plug from the base of the light light head of SL125 RC see figure 1 4 A sealed vent on the base allows air transfer without moisture intake and should not be disturbed Adjust Rotary Switches A amp B to setup lantern groups or lantern synchronisation ROTARY SWITCH A Determine to which group each individual light belongs E g Channel A lights 0 Leading lights 1 Channel B lights 2 etc Adjust Rotary Switch A to the appropriate light group E g 0 1 or 2 ROTARY SWITCH B Rotary Switch B is used for synchronising light groups Light groups may flash together in synchronisation or as a flare path Flash Synchronisation For each light group set rotary switch B to the same number e Flare Path Start at one end of the channel Set the first pair of lights 0 next set of lights 1 etc If you have more than 16 sets along the channel just continue the setting e g D E F 0 1 this will allow all lights to continue the flare path To test operation of the light the Radio Controller will need to be used see Using the Radio Controller to Activate SL125 RC Radio Controlled System section of this manual Replace t
7. Intensity Adjustments LED Life Expectancy hours Electrical Characteristics Current Draw mA Circuit Protection Nominal Voltage v Autonomy days Temperature Range Solar Characteristics Solar Module Type Output watts Solar Module Efficiency Charging Regulation Power Supply Battery Type Battery Capacity Ah Nominal Voltage v Battery Service Life Physical Characteristics Body Material Lens Material Lens Diameter mm inches Lens Design Mounting Height mm inches Width mm inches Mass kg Ibs Product Life Exoectancy Certifications CE Quality Assurance Waterproof Intellectual Property Patents Trademarks Warranty Options Available 51125 Series LED Lantern Red Green White Yellow Blue Refer to 51125 Series Light 4 Electrical Characteristics Summary 5 9 360 9 Omnidirectional 360 LED Reflector US Pat No 6 667 582 AU Pat No 778 918 Up to 256 IALA recommended user adjustable Adjustable in 25 increments gt 100 000 Refer to Sealite Power Calculator Reverse polarity 12 gt 20 14 hour darkness 12 5 duty cycle 40 to 80 C Multicrystalline 40 SL125 1 C 1 T2 SL125 2 C 1 T2 SL125 3 C 1 T2 and SL125 4 C 1 T2 80 SL125 1 C 2 T2 51125 2 2 2 51125 3 2 2 and L125 4 C 2 T2 14 Microprocessor controlled SLA Sealed Lead Acid 55 12 Average 5 years 7 stage powder coated aluminium LEXAN Polycarbonate UV stabilised 150 5
8. 0 5 0 3 0 3 0 4 0 5 0 8 0 3 0 3 0 5 0 5 0 8 0 3 0 5 1 0 0 5 0 5 0 3 0 5 0 5 15 0 5 0 5 0 5 OFF 3 7 4 5 6 1 4 2 7 1 6 8 1 9 9 5 7 0 5 0 5 7 1 0 TA 6 5 7 5 6 5 7 2 5 0 6 0 4 0 5 5 10 7 11 8 10 5 11 8 10 7 10 1 5 0 13 7 12 5 15 5 15 2 15 0 0 3 0 7 0 6 1 0 1 2 0 7 Taf 0 5 1 5 1 2 0 7 1 5 1 0 0 5 1 5 3 0 1 5 4 5 1 5 0 5 0 5 0 5 0 3 0 3 0 4 0 5 0 8 0 3 0 3 0 5 0 5 0 8 0 3 0 5 1 0 0 5 0 5 0 3 0 5 0 5 1 5 0 5 0 5 0 5 2 3 2 7 2 6 5 0 3 2 6 7 5 7 8 5 5 5 5 2 8 7 8 5 8 0 10 5 9 5 9 8 13 5 10 5 9 5 16 5 24 5 26 5 Latest products and information available at www sealite com Sealite SL125 RC Series Se 5 9nm LED Marine Lantern amp Radio Control System SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF ON OFF A D Q 5 7S 0 3 07 03 07 03 07 03 07 03 27 D Q 5 10S 03 07 03 07 03 07 03 07 03 57 8 FL 5 12S 05 15 05 15 05 15 05 15 05 35 5 F 5 205 05 05 05 05 05 05 05 05 05 15 5 9 FL 5 20S 08 12 08 12 08 12 08 12 08 112 9 5 20 1 0 10 10 10 10 10 10 10 10 110 SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF A Q 6 10S 07 03 07 03 07 03 07 03 07 03 47 A 6 15 03 07 03 07 03 07 03 07 03 07 03 97 7 6 15 05 10 05 10 05 10 05 10 05 10 05 70 E FL 6 LFL15S 05 1
9. 7 2V is within operational range If the voltage is below 7V the controller should be charged immediately See Charging the Radio Controller section of this manual for details The Radio Controller can be left permanently plugged into the charger if required Note The Radio Controller can still be used while it is charging Sending Commands Every time the SEND button is pressed a command is sent containing all the current settings in the Radio Controller The SEND button can be used after changing one setting or after changing multiple settings Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Using the Radio Controller to Activate the SL125 RC Radio Controlled System The Radio Controller is very easy to use and by reading through the How To sections below all of the advanced features will be well within your grasp Make sure that all the lights in the same Light Group have had the rotary switches set correctly see Setup amp Installation section of this manual for details HOW TO Turn all the lights ON Turn the Radio Controller On Use the arrow keys to adjust the Operational Mode to Always ON Press MENU button once to reach Light Group Use the arrow keys to set the Light Group to ALL Press SEND button Every radio light within range of the control unit will now turn on HOW TO Setup the
10. Marine Lantern amp Radio Control System Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Sealite LED Light Warranty V2 1 Activating the Warranty Upon purchase the Sealite Pty Ltd warranty must be activated for recognition of future claims To do 2 this you have two 2 options Postal Registration please complete the Sealite Warranty Registration Card and return to Sealite within 30 days of your purchase Online Registration please complete the Online Registration Form at www sealite com Sealite Pty Ltd will repair or replace your LED light in the event of electronic failure for a period of up to three years from the date of purchase The unit must be returned to Sealite freight prepaid Warranty Terms 1 Sealite Pty Ltd warrants that any Sealite marine products fitted with telemetry equipment including but not limited to AIS GSM GPS or RF Telemetry Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of twelve 12 months from the date of purchase by the original purchaser Sealite Pty Ltd warrants that any BargeSafe Ser
11. OVERRIDE Flare Path Rotary Switch B will be ignored and all lights with the same flash code will syncronise Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Light Sensor Used to enable or disable the light sensor internal to each Light Note this menu will only be enabled if the selected Operational Mode is DUSK till DAWN External Input Used to enable or disable the external input line to the control unit Note this menu will only be enabled if the selected operational mode is DUSK till DAWN Battery Diagnostic Default Disable This feature can be used to check the battery voltage in every light in the system The command can be sent any time and it will not affect the current state of the light If the light is in STANDBY mode the light will turn on as shown below and revert to STANDBY mode after the diagnostic has been completed e If the battery voltage is within operational range the light will turn off for 1 second flash once then turn off for 1 second e If the battery voltage is low the light with turn off for 1 second flash twice then turn off for 1 second Controller Battery Voltage This menu displays the current battery voltage of the controller unit Diagnostic Pass ALL 1 Second 1 Second 1 Second Diagnostic Fail 1 Second 300 ms 400ms 300 ms 1 Second Any voltage above
12. Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Maintenance amp Servicing Designed to be virtually maintenance free the SL125 RC amp SL125 C RC series lantern reguire minimal attention though the following maintenance and servicing information is provided to help ensure the life of your Sealite product Cleaning Lens occasional cleaning of the light lens body be required Using cloth and warm soapy water wipe off any foreign matter before rinsing the lens body with fresh water Cleaning Solar Panels occasional cleaning of the solar panels may be required Using a cloth and warm soapy water wipe off any foreign matter before rinsing the panels with fresh water SL125 C RC models only Battery Check inspection of batteries should be performed every three years minimum to ensure that the charger battery and ancillary electronics are functioning correctly Using a voltage meter check that the battery voltage is at least 3 6 volts under 100mA load and ensure all terminals are clear of foreign matter SL125 C RC models only Replacing the Battery The SL125 C RC series lantern have a sealed battery compartment which provides the user with the ability to change the battery after years of operation 1 2 10 TI 12 Remove the bolt lock securing the battery box lid and open unit Inside the battery box is an internal battery container To access the batte
13. The warranty does not extend to any lost profits loss of good will or any indirect incidental or conseguential costs or damages or losses incurred by the purchaser as a result of any defect with the covered product Warrantor Sealite Pty Ltd has authorised distribution in many countries of the world In each country the authorised importing distributor has accepted the responsibility for warranty of products sold by distributor Warranty service should normally be obtained from the importing distributor from whom you purchased your product In the event of service required beyond the capability of the importer Sealite Pty Ltd will fulfil the conditions of the warranty Such product must be returned at the owner s expense to the Sealite Pty Ltd factory together with a photocopy of the bill of sale for that product a detailed description of the problem and any information necessary for return shipment Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor Sealite products are subject to certain Australian and worldwide patent applications Latest products and information available at www sealite com Sealite SL125 RC Series 5 9nm LED Marine Lantern amp Radio Control System Other Sealite Products Available 474 4 4 4 4 4 Marine Lanterns Monitoring 1 12nm amp Control Systems Bridge amp Barge Lights Marine Buoys up to 3mt in diam
14. lanterns Controlled by a menu driven 2 4GHz handheld transceiver lanterns may be Activated or deactivated Flash character changed to any of the 256 codes available Intensity adjusted up to 8 levels The SL125 RC lantern can be fitted with up to 3 different LED colour combinations allowing for fast changeover of channel direction or to quickly change the state of a channel eg Open or Closed This is all achieved using the handheld radio control unit Table 1 1 SL125 LED Marine Lantern Series 12v Peak Intensity Flashing Power Description cd Colour No LEDs Amp hour Voltage SL125 1 R 163 Red 12v SL125 1 G 200 Green 12 SL125 4 w ter LED Lantern 180 White 12v SL125 1 Y 145 Yellow 12 SL125 2 R 280 Red 12v SL125 2 G 328 Green 12 SL125 2 w ier LED Lantern 319 White 12v SL125 2 Y 257 Yellow 12 SL125 3 R 427 Red 12v SL125 3 G 518 Green 12v SL125 3 w 37197 LED Lantern 496 White 12v SL125 3 Y 399 Yellow 12 SL125 4 R 12v SL125 4 G 12v SL125 4 W 4 tier LED Lantern 12v SL125 4 Y 12 Subject to change or variation without notice Latest products and information available at www sealite com www sealite com SL125 RC Series 5 9nm LED Marine Lantern amp Radio Control System SL125 Series SPECIFICATIONS Light Characteristics Light Source Available Colours Maximum Available Intensity cd Tt Visible Range nm Horizontal Output degrees V
15. s External optics with interior flute design 200mm OD base pattern From 570 221 2 665 261 4 From 45 991 4 Up 12 years EN61000 6 3 2001 EN61000 6 1 2001 EN55022 EN61000 4 2 1995 EN61000 4 3 2002 USCG specification HSCG23 05 R E43013 including Change 1 ISO9001 2008 light head IP66 battery compartment US Pat No 6 667 582 AU Pat No 778 918 SEALITE is a registered trademark of Sealite Pty Ltd 3 years Single or dual solar module s 100Ah battery e 60watt solar module single or dual configuration GPS Synchronisation RF Synchronisation AIS Remote Monitoring GSM Monitoring amp Control System Radio Control System Note remote monitoring control will reduce visible range of lantern due to increased power consumption Extended base post 3 or 10 degree lens Specifications subject to change or variation without notice Subject to standard terms and conditions 1 Intensity setting subject to solar availability Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System DIAM 13 5mm 0 53 on PCD 200mm 7 87 665 Figure 2 1 SL125 1 C 1 240 665 Diam 13 5mm 0 53 on PCD 200mm 7 87 312 755 12 3 29 7 Figure 2 2 SL125 1 C 1 T2 Latest products and information available at www sealite com Sealite SL125 RC Series
16. 0 05 10 05 10 05 10 05 10 05 70 SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF A B 6 E VQ 6 LFL10S 02 03 02 03 02 0 3 02 03 0 2 03 0 2 03 20 50 7 E VQ 6 LFL10S 0 3 03 03 03 03 0 3 03 03 0 3 03 20 44 2 Q 6 LFL15S 0 2 0 8 0 2 0 8 0 2 0 2 0 8 0 2 0 8 02 08 20 7 0 2 6 121 155 0 7 07 03 07 03 07 03 07 03 07 20 7 0 3 6 121 159 0 6 06 06 0 6 06 06 06 06 06 06 06 06 20 58 8 VQ 6 LFL15S 03 03 03 03 03 03 03 03 03 03 20 9 4 FLASH CODE A B 4 E VQ 9 105 0 2 0 3 02 03 02 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 5 8 5 E VQ 9 10 0 3 0 3 03 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 4 9 1 F Q 9 15S 0 2 08 02 08 02 0 8 02 08 02 0 8 02 08 02 08 02 08 02 68 0 Q 9 15S 0 3 0 7 0 3 0 7 0 3 0 7 0 3 07 0 3 07 0 3 0 7 0 3 0 7 0 3 07 0 3 67 1 9 155 0 6 06 0 6 0 6 06 0 6 0 6 0 6 0 6 0 6 06 0 6 0 6 0 6 0 6 0 6 0 6 48 SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF MORSE INDICATES LETTER 7 8 O A 6S 0 3 06 10 41 7 O A 8S 04 06 20 5 0 8 8 O A 8S 0 8 12 24 36 8 O U 10S 0 3 07 03 07 09 7 1 C 8 O U 10S 04 06 04 06 12 68 D 8 O U 10 S 0 5 0 5 0 5 05 15 6 5 9 8 10S 0 5 0 5 15 7 5 8 9 O D 10 5 50 1 0 1 0 1 0 1 0 1 0
17. 2 6S 03 06 10 4 1 A FL 2 6S 03 09 03 45 6 FL 2 6S 03 10 03 44 7 FL 2 6S 04 10 04 42 9 9 FL 2 6S 05 10 05 40 2 8 FL 2 6S 08 12 08 32 3 7 FL 2 6S 10 10 10 3 0 3 9 0 2 65 07 03 47 9 FL 27S 10 10 10 4 0 7 FL 2 8S 04 06 20 50 8 FL 2 8S 04 10 04 62 4 7 FL 2 8S 05 10 05 60 8 8 FL 2 8S 08 12 24 36 5 7 FL 2 8S 10 10 10 50 4 0 2 85 30 20 1 0 20 5 0 2 8 50 10 10 10 VQ 28S 02 10 02 66 9 FL 2 10S 04 16 04 76 9 8 FL 2 10S 05 05 15 75 6 7 FL 2 10S 05 10 05 80 7 7 FL 2 10S 05 15 05 75 6 9 FL 2 10S 05 20 05 7 0 8 7 FL 2 10S 08 12 08 72 B 9 FL 2 10S 10 10 10 7 0 9 7 FL 2 10S 10 15 10 65 4 9 Q 2 10S 06 04 06 84 B A FL 2 12S 04 10 04 102 9 FL 2 12S 05 10 05 10 0 D 9 FL 2 12S 15 20 15 7 0 A 8 FL 2 15S 05 15 20 110 A 7 FL 2 15S 10 20 10 11 0 8 O 2 15S 02 08 02 138 A 2 205 1 0 30 1 0 150 D 2 255 1 0 1 0 1 0 22 0 SWITCH FLASH CODE ON OFF ON OF OFF A B 7 9 0 3 55 05 05 05 05 05 25 5 9 VQ 3 5S 02 03 02 03 02 38 0 VQ 3 5S 0 3 02 03 02 03 37 9 VQ 3 5S 03 03 03 03 03 35 3 FL 3 6S 05 10 05 10 05 2 5 2 FL 2 1 6S 0 3 04 03 12 03 35 Latest products and information available at www sealite com www sealite com SL125 RC Series 5 9nm LED Marine Lantern amp Radio Control System
18. 4 2 4 WECHMOIOO NT m 5 SL125 RC Models 0 2 Page 6 IZ OGOS THY Hx Page 7 9L125 Type 1 Complete ue nutre SUR Page 9 SL125 Type 2 Complel6 trt tt Xn Page 10 Setup amp Installation 12 Sealite Radio 1 13 Assembly amp Installation of Radio Controller Page 14 Radio Controller Page 15 Using the Radio Controller to Activate SL125 RC System Page 18 Maintenance and Servicing Page 20 Lantern Status Page 21 DEAR OS Page 22 Trouble 5 27 Sealite Lantern Warranty Page 30 Release August 2010 K Paton 1 1 Update Spec tables May 2012 J Dore Version No Description Date Approved Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Introduction Congratulations By choosing to purchase a Sealite lantern you have become the owner of one of the most advanced LED
19. 61000 6 1 2001 EN55022 61000 4 2 1995 EN61000 4 3 2002 USCG specification HSCG23 05 R E43013 including Change 1 ISO9001 2008 68 US Pat No 6 667 582 AU Pat No 778 918 SEALITE is a registered trademark of Sealite Pty Ltd 3 years GPS Synchronisation RF Synchronisation AIS Remote Monitoring GSM Monitoring amp Control System Radio Control System Note remote monitoring control will reduce visible range of lantern due to increased power consumption Additional cable 3or 10 degree lens A Specifications subject to change or variation without notice Subject to standard terms and conditions 1 Intensity setting subject to solar availability Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Nylon Cable Gland Diam 16mm 945 8 07 231 9 09 Figure 1 1 Figure 1 2 SL125 1 51125 2 amp SL125 3 Diam 17mm x 30mm Slot 0 67 x 1 18 6 places Flash Adjustment lin Sealed Vent Figure 1 3 Figure 1 4 SL125 4 Base all models Latest products and information available at www sealite com www sealite com SL125 RC Series 5 9nm LED Marine Lantern amp Radio Control System SL125 Type 1 Complete SPECIFICATIONS Light Characteristics Light Source Available Colours Maximum Available I
20. 8S 50 3 0 B O FL3S 05 25 B 2 LFL8S 3 0 5 0 3 5 2135 06 24 F 5 FL9S 09 8 1 0 FL3S 07 23 C 4 FL9S 10 80 D O FL3S 1 0 26 7 6 OC9S 60 3 0 2 2 15035 15 15 0 6 10 02 98 5 4 OC3S 20 1 0 1 6 FL10S 03 97 E 2 0622 25 0 5 D 1 FL10S 05 9 5 4 6 OC35S 25 1 0 2 6 FL10S 08 92 4 5 FL4S 02 38 1 21105 10 9 0 5 5 FL4S 03 37 1 4 FL10S 1 5 85 0 FL4S 04 3 6 2 LFL10S 20 80 F O FL4S 05 35 D 2 LFL10S 30 7 0 6 5 FL4S 06 34 7 2 ISO10S 50 50 0 1 FL4S 08 32 2 4 LFL10S 40 6 0 1 1 FL4S 1 0 3 0 8 6 OC10S 60 40 2 1 FL4S 1 5 25 5 3 0 105 70 30 3 2 15045 20 20 6 3 OC40S 75 25 3 6 OC4S 25 15 1 21125 1 2 10 8 F 2 OC4S 30 1 0 D 4 FL12S 25 95 3 1 FL43S 13 1 80 3 4 LFL128S 20 10 0 8 5 FL5S 02 48 0 2 FL15S 1 0 14 0 4 1 FL5S 0 3 47 4 4 LFL15S 40 110 5 1 FL5S 0 5 45 7 4 OC15S 10 50 9 5 FL5S 09 41 6 LFL20S 20 18 0 6 1 FL5S 1 0 40 4 FL26S 1 0 25 0 Latest products and information available at www sealite com au Sealite SL125 RC Series Seen 5 9nm LED Marine Lantern amp Radio Control System SWITCH FLASH CODE ON OFF ON OFF A B 0 FL 24S 05 10 05 20 E VQ 24S 02 10 02 26 1 FL 245S 03 10 03 29 2 FL 245S 04 10 04 27 3 FL 245S 05 10 05 25 9 FL 25S 02 08 02 38 2 C FL 25S 02 12 02 34 4 FL 2 5S 04 06 04 36 0 7 FL 25S 05 10 05 30 1 7 FL 25S 10 10 10 20 9 O 2 5S 03 07 03 37 2 9 0 2 55 05 05 05 35 5 FL 255S 04 14 04 33 7 8 FL
21. D Bank 3 Only LED bank 3 only is used when on LED banks 1 2 amp 4 are always off LED Bank 4 Only LED bank 4 only is used when on LED banks 1 2 amp 3 are always off Alternating 1 2 LED bank 1 amp 2 will alternate at the end of each flash seguence The light will start by flashing using LED bank 1 then it will flash an entire seguence using LED bank 2 then LED bank 1 and so on g Cycle 1 2 3 4 LED bank 1 2 3 amp 4 will alternate at the end of each flash sequence The light will start by flashing using LED bank 1 then it will flash an entire seguence using LED bank 2 then LED bank 3 then LED bank 4 then LED bank 1 and so on Note this menu will not be enabled if the selected operational mode is STANDBY Note SL125 RC series lights have only 4 different LED banks 5 Flare Path Setup This menu is used when the lights are required to flash sequentially in either direction in a channel To use this setting each light in the group will need to set sequentially using Rotary Switch B On each light set the rotary switch to B Set the first pair of lights O next set of lights 1 etc If you have more than 16 sets along the runway just continue the setting e g D E F 0 1 this will allow all lights to continue the flare path FORWARD Flare Path Each set of lights will sequence from 0 to F REVERSE Flare Path Each set of lights will sequence from F to 0 SYNCHRONISATION
22. Orange 5 The charger has LED to indicate the charge sequence i _ Green Unit is fully charged The Radio Controller can be left connected in state ii Orange Unit is charging The unit will charge for a maximum of 8 hours before automatically shutting down Red A fault is occurring please contact Sealite Office Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Radio Controller Menu This section of the document will provide a short explanation of all the menu screens on the control unit Modes of Operation The operational mode defines how the light will respond to different environmental conditions amp user inputs There are three operational modes that can be selected via the controller ALWAYS ON STANDBY amp DUSK till DAWN ALWAYS ON Operational Mode The light will be lit both day amp night While the light is in this mode it will only turn off when the battery drops below the Flat Battery Voltage level STANDBY Operational Mode The light is Always Off While the light is in this mode it will still respond to and pass on commands sent by the controller This mode should be used if the lights have been installed outside but are not currently reguired Note The light is not completely powered down in a manner suitable for storage If the light is to be stored in a warehouse o
23. e a limited number of charge cycles and may eventually need to be replaced Typical battery replacement period is 3 4 years Long term exposure to high temperatures will shorten the battery life Batteries used or stored in a manner inconsistent with the manufacturer s specifications and instructions shall not be covered by this warranty 5 No modifications to the original specifications determined by Sealite shall be made without written approval of Sealite Pty Ltd 6 Sealite lights can be fitted with 3rd party power supplies and accessories but are covered by the 3rd party warranty terms and conditions 7 The product must be packed and returned to Sealite Pty Ltd by the customer at his or her sole expense Sealite Pty Ltd will pay return freight of its choice A returned product must be accompanied by a written description of the defect and a photocopy of the original purchase receipt This receipt must clearly list model and serial number the date of purchase the name and address of the purchaser and authorised dealer and the price paid by the purchaser On receipt of the product Sealite Pty Ltd will assess the product and advise the customer as to whether the claimed defect is covered by this warranty 8 Sealite Pty Ltd reserves the right to modify the design of any product without obligation to purchasers of previously manufactured products and to change the prices or specifications of any product without notice or obligation to any person
24. em Flash Codes Sealite lantern may be set to any of 256 IALA recommended flash settings the handheld radio controller SEALITE code reference is listed by number of flashes For the latest version of this document visit www sealite com or email info sealite com Symbols FL Flash followed by number Eg FL 1 S one flash every second F Fixed Q Quick flash VQ Very quick flash OC Occulting greater period on than off ISO Isophase equal period on and off LFL Long flash long MO Morse code contains letter For example VQ 6 LFL 10 S means 6 very quick flashes followed by a long flash during a 10 second interval The amount of power your lantern draws through the night depends on the duty cycle i e the amount of time on as a proportion to the timing cycle For example 0 5 seconds on and 4 5 seconds off equals a 10 duty cycle It is best to operate at the lowest duty cycle appropriate to the actual needs of the application Recommended Rhythm for Flashing Light IALA Regions A and B MARK DESCRIPTION RHYTHM Port Hand amp Starboard Marks Any other than Composite Group Flashing 2 1 Preferred Channel Starboard Composite Group Flashing 2 1 Preferred Channel Port Composite Group Flashing 2 1 North Cardinal Mark Very quick or quick East Cardinal Mark Very quick 3 every 5 seconds or quick 3 every 10 seconds South Cardinal Mark Very quick 6 long flash every 10 seconds or quick 6 l
25. en to observe the polarity of each wire before they are connected Note Refer to Lantern Status section of this manual to check the status of the light after activated Indicated by red and yellow status LED s viewed at the base of the lens Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Radio Controller The Sealite Radio Controller is a compact handheld unit that allows complete control of the Navigational lighting system The unit allows you to roam around the port for easy activation inspection and testing of the marine lights The Sealite Radio Controller works on the 2 4GHz ISM Band using a low power RF module The backlit LCD can be seen during day or night The straightforward menu makes it easy to operate The Sealite Radio Controller comes standard with an IP68 rated charging plug omni directional antenna and ON OFF switch It can also be optioned with an RS232 input The Radio Controller and charger come in an IP68 Pelican Case to protect it from the harsh environment to which it may be subjected Fig 3 0 Radio Controller Side View Fig 3 1 Radio Controller Front View LCD Screen MENU Button SEND Button UP Button DOWN Button Antenna NO O amp gt Charging Port IP68 sealed plug Charger not shown Latest products and information available at www sealite com
26. ertical Divergence degrees Reflector Type Available Flash Characteristics Intensity Adjustments LED Life Expectancy hours Electrical Characteristics Current Draw mA Circuit Protection Nominal Voltage v Temperature Range Physical Characteristics Body Material Lens Material Lens Diameter mm inches Lens Design Mounting Height mm inches Width mm inches Mass kg lbs Product Life Expectancy Certifications GE Quality Assurance Waterproof Intellectual Property Patents Trademarks Warranty Options Available SL125 1 36 ultra high intensity LEDs SL125 2 72 ultra high intensity LEDs SL125 3 108 ultra high intensity LEDs 51125 4 144 ultra high intensity LEDs Red Green White Yellow Blue Refer to 51125 Series Light amp Electrical Characteristics Summary 5 9 360 9 SL125 1 SL125 2 amp SL125 3 5 SL125 4 Omnidirectional 360 LED Reflector US Pat No 6 667 582 AU Pat No 778 918 Up to 256 IALA recommended user adjustable Adjustable in 25 increments gt 100 000 Refer to Sealite Power Calculator Integrated 12 40 to 80 C LEXAN Polycarbonate UV stabilised LEXAN Polycarbonate UV stabilised 150 57 External optics with interior flute design 3 amp 4 hole bolt pattern on 200mm OD base SL125 1 205 8 s SL125 2 240 91 2 SL125 3 240 91 2 SL125 4 240 91 2 231 91 8 From 1 1 23 8 Up to 12 years 61000 6 3 2001 EN
27. eter Area Lighting Mooring Systems amp Accessories ALA Head Office Sealite Pty Ltd x 592 11 Industrial Drive b Somerville Vic 3912 Australia _ 9 6135977 6128 2 Soo se Sealite Fax 61 3 5977 6124 E Email info sealite com 2 2 www sealite com Internet www sealite com SAI GLOBAL Latest products and information available at www sealite com
28. g Products or Sealite Products found to be defective in material and workmanship in the relevant warranty period so long as the Warranty Conditions set out below are satisfied If any Telemetry Products BargeSafe Products Area Lighting Products or Sealite Products are fitted with a rechargeable battery Sealite Pty Ltd warrants the battery will be free from defect for a period of one 1 year when used within original manufacturer s specifications and instructions Warranty Conditions This Warranty is subject to the following conditions and limitations 1 2 The warranty is applicable to lanterns manufactured from 1 1 2009 The warranty is void and inapplicable if a the product has been used or handled other than in accordance with the instructions in the owner s manual and any other information or instructions provided to the customer by Sealite b the product has been deliberately abused or misused damaged by accident or neglect or in being transported or c the defect is due to the product being repaired or tampered with by anyone other than Sealite or authorised Sealite repair personnel Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System 3 The customer must give Sealite Pty Ltd notice of any defect with the product within 30 days of the customer becoming aware of the defect 4 Rechargeable batteries hav
29. g a hand held radio controller to activate and setup an entire port harbour or channel The system utilises an embedded RF module operating in the 2 4Ghz ISM Band The lights can be configured for up to 15 different light groups This allows the Harbour Master to independently control different areas such as multiple channels Due to the handheld nature of the Radio Controller it can be used from any position in the port or harbour This can allow for easy and efficient inspection or activation of different light groups without affecting other lights The standard radio controller broadcasts a command message to all lights within range This range is approximately 1 4km 0 7 nautical miles If a higher gain antenna is used the range can be extended Each light within range will receive decode and re send the message to all surrounding lights Each light also has an operational range of 1 4km For distances greater than 1 4km there may be a delay in those lights receiving the command The further away the lights are from the controller the longer it will take the command to propagate to all lights Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Technology Sealite is the world s fastest growing manufacturer of marine aids to navigation We employ leading mechanical optical hardware amp software engineers to create innovat
30. he Flash Adjustment Plug Clost the battery box lid of the complete unit SL125 RC ONLY Ensure that the unit is bolted to an even flat surface Activation amp Installation of SL125 RC 1 Battery Connection Connect Battery Positive wire to positive terminal of battery and Battery Negative wire to negative terminal of battery Mains Connection Connect positive and negative wires to 12volt power supply ONLY To test place dark cover towel or jacket on top of light to activate sensor light will come on within one minute Ensure that the unit is bolted to an even flat surface Activation amp Installation of SL125 C RC 1 oo de Uu Inside the battery box is an internal battery container To access the battery remove the four screws and lid of this internal container Connect the Battery Negative wire to the negative terminal of the battery and the Battery Positive wire to the positive terminal of the battery Connect the Battery Positive and Battery Negative wires from the Solar Regulator to the battery Replace the internal battery container lid and screws making sure no wires are protruding Close the battery box lid and secure with bolt lock Light is now activated To test place dark cover towel or jacket on top of light to activate sensor light will come on within one minute Ensure that the unit is bolted to an even flat surface Care must be tak
31. ies of LED barge light products BargeSafe Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of twelve 12 months from the date of purchase by the original purchaser Sealite Pty Ltd warrants that any LED area lighting products Area Lighting Products but not including sign lighting products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of twelve 12 months from the date of purchase by the original purchaser Sealite Pty Ltd warrants that any LED sign lighting products Sign Lighting Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of three 3 years from the date of purchase by the original purchaser Sealite Pty Ltd warrants that any Sealite marine lighting products other than the Telemetry Products BargeSafe Products and Area Lighting Products Sealite Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of three 3 years from the date of purchase by the original purchaser Sealite Pty Ltd will repair or replace at Sealite s sole discretion any Telemetry Products BargeSafe Products Area Lightin
32. ive products to service the needs of our customers worldwide and offer the widest range of solar powered LED lanterns in the marketplace Electronics Sealite employs leading in house electronic engineers in the design and development of software and related circuitry All individual electronic components are sourced directly by Sealite procurement staff ensuring that only the highest guality components are used in our products LED Technology All marine lanterns use the latest advancements in LED Light Emitting Diode technology as a light source The major advantage of LED s over traditional light sources is well established in that they typically have an operational life in excess of 100 000 hours resulting in substantial savings to maintenance and servicing costs Precision Construction Commitment to investing in the design and construction of injection moulded parts including optic lenses light bases and a range of other components ensures that all Sealite products are of a consistent amp superior guality Optical Performance Sealite manufactures a range of marine LED lenses moulded from multi cavity dies Complex shapes such as the SL70 BargeSafe and 16 segment multi focus lenses are a testament to the company s superior in house lens manufacturing capabilities and outstanding optical performance Award winning Patented Technology Several United States and Australian patent registrations are held on Sealite s range of in
33. lights to operate in DUSK till DAWN mode Turn the Radio Controller unit On Use the arrow keys to adjust the operational Mode to Dusk till Dawn Press MENU button once to reach Light Group Set the Light Group to ALL Press MENU button until you reach Light Sensor Use the arrow keys to adjust the Light Sensor to Enable Press SEND button Every radio light within range of the control unit will now turn on at night during the day the lights will turn off automatically Note if the lights were already in Always ON mode they will stay on for up to 60 seconds while the light sensor activates HOW TO Channel B only is to be HIGH Intensity but Channel A will remain in current configuration On Channel A set the rotary switches to 0 B 0 inside the light head On Channel B set the rotary switches to A 1 B 0 inside the light head Rotary Switch A can be set to any value that is different from Channel A Turn the Control unit On Use the arrow keys to adjust the operational Mode to Always On Press MENU button once to reach Light Group Set the Light Group to 1 Press MENU button once to reach LED Intensity Use the arrow keys to adjust the LED Intensity to HIGH Press MENU button until you reach LED Bank Setup Use the arrow keys to adjust the LED Bank to Visible Press SEND button Channel A will not change state Channel B will now be High Intensity Latest products and information available at www sealite com Sealite SL125 RC Se
34. marine lanterns in the world Sealite Pty Ltd has been manufacturing lanterns for over 25 years and particular care has been taken to ensure your lantern gives years of service As a commitment to producing the highest quality products for our customers Sealite has been independently certified as complying with the requirements of ISO 9001 2008 quality management system Sealite lanterns comply with requirements of the US Coast Guard in 33 CFR part 66 for Private Aids To Navigation By taking a few moments to browse through this booklet you will become familiar with the versatility of your lantern and be able to maximise its operating function Please remember to complete the Sealite warranty registration card accompanying your lantern Operating Principle The solar module of the lantern converts sunlight to an electrical current that is used to charge the battery SL125 C RC models only The battery provides power to operate the lantern at night The flasher unit has very low current requirements A microprocessor drives an array of ultra bright LED s through a DC DC converter which enables the LED s to operate within the manufacturer s specifications The battery is protected from over charging within the circuit to ensure maximum battery life On darkness the microprocessor will initiate a program check and after approximately 1 minute begin flashing to the set code The Sealite Radio Controlled Lighting System works by usin
35. n amp Radio Control System Timeout Mode Default Enabled LOW This menu is used to setup the LED high intensity timeout feature found in each light The options include Enabled LOW Disable a Enabled LOW The immediate LED intensity is selected via the LED Intensity menu after Timer Duration the LED Intensity will revert back to the LOW setting b Disable The high intensity LED timeout is disabled The LED intensity will be selected via the LED intensity menu Note this menu will not be enabled if the selected operational mode is STANDBY Timeout Duration Default 15 Minutes This menu is only visible when the timeout Mode is enabled This menu is used to select the timeout duration the time before the LED intensity reverts back to its LOW intensity state The timeout duration can be set from 1 minute to 60 minutes LED Banks Optional All Sealite SL125 RC series lights can have the option of having multiple colours in different LED banks This menu is used to select which LEDs on the light should be used to flash the selected flash code The options include All LED Banks LED Bank 1 Only LED Bank 2 Only LED Bank 3 Only LED Bank 4 Only Alternating 1 2 amp Cycle 1 2 3 4 a ALL LED Banks LED Banks are used when on LED Bank 1 Only LED bank 1 only is used when on LED banks 2 3 amp 4 are always off LED Bank 2 Only LED bank 2 only is used when on LED banks 1 3 amp 4 are always off LE
36. novative designs with other regional patents pending in Canada United Kingdom and Europe Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System SL125 RC Models SL125 5 9nm light fixture is the most advanced LED marine lantern on the market Utilising the latest software and micro circuitry developments the lantern boasts a huge number of features including flash memory and the most efficient power conversion available This maintenance free model is also available with up to 4 tiers of 36 LEDs to increase the light intensity for a range of different light colours see Specifications table below Each LED tier utilises the Sealite omnidirectional LED Reflector US Pat No 6 667 582 AU Pat No 778 918 to increase the intensity and uniformity of the horizontal output In particular the SL125 4 tier model utilises a unique heat dissipating domed lens to achieve maximum LED intensity output over a wider range of environmental conditions see diagram page 8 The SL125 C Complete Lantern Assembly provides a complete solution for visual navigation requirements and is available in a range of solar battery configurations to suit the installation and intensity requirements The Radio Controlled SL125 Series Lantern System is designed to permit port and marina authorities to directly control the operation of singular or groups of
37. ntensity cd T Visible Range nm Horizontal Output degrees Vertical Divergence degrees Reflector Type Available Flash Characteristics Intensity Adjustments LED Life Expectancy hours Electrical Characteristics Current Draw mA Circuit Protection Nominal Voltage v Autonomy days Temperature Range Solar Characteristics Solar Module Type Output watts Solar Module Efficiency Charging Regulation Power Supply Battery Type Battery Capacity Ah Nominal Voltage v Battery Service Life Physical Characteristics Body Material Lens Material Lens Diameter mm inches Lens Design Mounting Height mm inches Width mm inches Mass kg lbs Product Life Expectancy Certifications CE Quality Assurance Waterproof Intellectual Property Patents Trademarks Warranty Options Available M SL125 1 or SL125 2 Red Green White Yellow Blue Refer fo SL125 Series Light amp Electrical Characteristics Summary 5 94 360 9 Omnidirectional 360 LED Reflector US Pat No 6 667 582 AU Pat No 778 918 Up to 256 IALA recommended user adjustable Adjustable in 2576 increments gt 100 000 Refer to Sealite Power Calculator Reverse polarity 12 gt 20 14 hour darkness 12 5 duty cycle 40 to 80 C Multicrystalline 20 SL125 1 C 1 and SL125 2 C 1 configurations 40 SL125 1 C 2 SL125 2 C 2 configurations 14 Microprocessor controlled SLA Sealed Lead Acid 26 12 A
38. ong flash every 15 seconds West Cardinal Mark Very quick 9 every 10 seconds or quick 9 every 15 seconds Isolated Danger Mark Group flashing 2 Safe Water Mark Isophase occulting one long flash every 10 seconds or Morse Code A Special Marks Any other than those described for Cardinal Isolated Danger or Safe Water Marks Latest products and information available at www sealite com SWITCH FLASH CODE ON OFF SWITCH FLASH CODE ON OFF A B A B 0 O Steady light 7 1 FL5S 1 5 3 5 D 3 00 55 0 2 03 4 2 15055 25 25 E VQ06S 02 04 8 2 LFL5S 20 3 0 F VQ06S 03 03 0 3 OC5S 30 20 7 31015 0 2 08 1 3 OC5S 40 1 0 8 3 015 0 3 07 2 3 OC5S 45 0 5 9 3 015 04 06 6 FL6S 02 58 A 310416 05 0 5 B 5 FL6S 03 57 8 4 015 08 02 C 5 FL6S 04 56 B 3 0125 03 0 9 8 1 FL6S 05 55 9 4 01285 05 07 9 1 FL6S 06 54 3 0125 06 06 A 1 FL6S 1 0 50 F 4 FL15S 62 43 7 5 FL6S 12 48 1 0 FL15S 03 1 2 B 1 FL6S 1 5 4 5 0 5 21155 04 14 5 2 15065 30 30 0 4 FL15S 05 10 9 2 LFL6S 20 40 2 0 FL2S 02 18 6 4 OC6S 40 20 3 0 FL2S 03 17 3 3 OC6S 45 15 4 0 FL2S 04 16 4 3 OC6S 50 10 5 0 FL2S 05 15 A 4 FL7S 10 60 6 0 FL2S 0 7 13 9 6 FL7S 20 50 7 O FL2S 08 12 5 6 OC7S 45 25 1 2 ISO2S 10 10 D 5 FL7 5S 05 7 0 8 0 FL25S 03 22 1 FL7 5S 08 67 9 0 FL25S 05 20 E 5 FL8S 05 75 D 6 FL25S 10 15 B 4 FL8S 10 7 0 1 5 FL3S 02 28 6 2 15085 40 40 0 FL3S 03 27 2 LFL8S 20 60 2 5 FL3S 04 26 6 6 OC
39. r other dark environment the ON OFF switch should be turned off DUSK till DAWN Operational Mode The light is turned on and off based on the light sensor internal to each light If the light is in the darkness it will turn on If the light is in daylight it will turn off Light Group This menu is used to select the current light group The light group of each light is selected via rotary switch A found on the bottom of the circuit board in the Light Head The controller can select any one of the 15 individual light groups 0 gt 9 A gt or select all radio lights at once Note all units are set with a light group of O in the factory Flash Code This menu is used to select any of the 256 preset flash codes in the lights for a full list please see Flash Codes section of this manual Note Flash Code 00 is steady on LED Intensity This menu is used to select the intensity of the LEDs on the light The options include Low Medium amp High a HARDWARE the intensity is set on the Light circuit board using the DIP Switches b Low LED intensity is set to low setting c Medium LED intensity is set to medium intensity approx 5090 d High LED intensity is set to high intensity approx 100 Note this menu will not be enabled if the selected operational mode is STANDBY Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lanter
40. ries www sealite com 5 9nm LED Marine Lantern amp Radio Control System HOW TO Channel is to be set as a Flare Path using Flash Code F 0 and High Intensity The channel will be tested in Always On mode then change to Dusk till Dawn On each light set the rotary switch to B Set the first pair of lights O next set of lights 1 next set of lights 2 etc If you have more than 16 sets along the channel just continue the setting e g F 0 1 2 3 this will allow all lights to continue the flare path Turn the Control unit On Use the arrow keys to adjust the Operational Mode to Always Press MENU button once to reach Light Group Set the Light Group to 0 or whichever number matches Rotary Switch A Press MENU button to Flash Code Set the Flash Code to F 0 This flash code can be set to any of the 256 available Press MENU button to reach LED Intensity Use the arrow keys to adjust the LED Intensity to HIGH Press MENU button to reach Flare Path Direction Use the arrow keys to adjust the Flare Path Direction to FORWARD Press SEND button The Channel will now start a Flare Path set in the desired Flash Code It is in Always ON Mode Press MENU button to reach Operational Mode Use the arrow keys to adjust the Operational Mode to Dusk till Dawn Press SEND button The Channel will now be set to operate automatically in Dusk till Dawn mode Latest products and information available at www sealite com
41. ry remove the four screws and lid of this internal container Remove old battery from container and disconnect all connecting wires Discard battery in a safe manner Connect the Battery Negative wire to the negative terminal of the new battery and the Battery Positive wire to the positive terminal of the new battery Connect the Battery Positive and Battery Negative wires from the Solar Regulator to the battery Replace the internal battery container lid and screws making sure no wires are protruding Close the battery box lid and secure with bolt lock Light is now activated To test place dark cover towel or jacket on top of light to activate sensor light will come on within one minute Care must be taken to observe the polarity of each wire before they are connected To ensure waterproofing of the unit make sure that no wires are protruding and that there is an even seal Always discard old batteries in a safe manner Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control System Lantern Status Two status LED s on the main printed circuit board position A in image below provide the operator with an indication of the lantern status There is one RED and one YELLOW LED that in different combinations of ON OFF FLASHING will indicate the current operational status of the light and var
42. verage 5 years 7 stage powder coated aluminium LEXAN Polycarbonate UV stabilised 150 57 8 External optics with interior flute design 200mm OD base pattern From 665 26 4 656 253 4 From 18 395 8 Up to 12 years EN61000 6 3 2001 61000 6 1 2001 EN55022 EN61000 4 2 1995 EN61000 4 3 2002 USCG specification HSCG23 05 R E43013 including Change 1 ISO9001 2008 IP68 light head IP66 battery compartment US Pat No 6 667 582 AU Pat No 778 918 SEALITE is a registered trademark of Sealite Pty Ltd 3 years Single or dual solar module s GPS Synchronisation RF Synchronisation GSM Monitoring amp Control System Radio Control System Note remote monitoring control will reduce visible range of lantern gt due increased power consumption 10 degree lens 40 watt panels UN Specifications subject to change or variation without notice Subject to standard terms and conditions T Intensity setting subject to solar availability Latest products and information available at www sealite com SL125 RC Series 5 9nm LED Marine Lantern amp Radio Control System www sealite com SL125 Type 2 Complete SPECIFICATIONS Light Characteristics Light Source Available Colours Maximum Available Intensity cd ft Visible Range nm Horizontal Output degrees Vertical Divergence degrees Reflector Type Available Flash Characteristics
43. y depending on whether the lantern is set to steady on or a flashing light characteristic These indicator LED s can be viewed at the base of the lens Radio Circuit where fitted Main Circuit Lantern Status Indicator LEDs Fig 4 0 Location of lantern status indicator LEDs NOTE checking in daylight lantern must be covered to activate flash pattern STEADY amp FLASHING LIGHTS LED Combinations Status Indicator LEDs A in Fig 4 0 Lantern Status Lantern Comment YELLOW LED RED LED Flashing ON very Normal running condition in times per second Normal OFF then 11 seconds cee off Flashing Normal ON Normal running condition constant Battery is flat Battery must receive charge and light must see daylight for at least 1 minute before resuming normal operation Flashing ON OFF very quick 9 times per second Low Battery Voltage lt 8v Battery is in state of very high charge Check regulator if persists Internal ambient temperature is gt 75 C Selected light intensity is dropped by 25 Will resume normal operation when temperature lt 75 C High Solar Voltage gt 15 3v High internal ambient temperature gt 75 C Flashing ON Flashing ON OFF 9times per OFF 1 time per second second Latest products and information available at www sealite com Sealite SL125 RC Series www sealite com 5 9nm LED Marine Lantern amp Radio Control Syst
Download Pdf Manuals
Related Search