Kawsaki Ninja 400R Slip-On
Contents
1. Ltd 140 North Port Road Port Perry Ontario Canada L9L 1B2 Product being returned without notification prior to shipping will be overlooked Upon receipt Hindle Products Ltd will repair or replace as appropriate your Hindle product and return it to you post paid Warranty is solely through Hindle Products Ltd Service to our products by anyone other than Hindle Products Ltd voids warranty Hindle Products Ltd disclaims any and all liability for consequential or incidental damages Hindle Products Ltd will not be held responsible for personal damage bodily harm or any other legal matters2. 12 months from the date of purchase except as noted The product warranty does not cover damage caused by misuse or abuse accident the attachment of any unauthorized accessory alteration to the product improper installation exposure to harsh weather and or chemicals lack of proper maintenance or any other conditions that are beyond the control of Hindle Products Ltd Hindle Products Ltd shall not be responsible for any type of incidental consequential or special damages All implied warranties including but not limited to those warranties of fitness and merchantability are limited in the total duration to 12 months from the original purchase date Hindle will not warrant any product for fit ment issues after the system has been ran on the motorcycle for any length of time If the warranty occurs within 30 days from the date of purchase please contact the dealer product was purchased from Over 30 days from the date of purchase please contact Hindle Products Ltd direct at 905 985 6111 before shipping the product Customer must contact Hindle Products Ltd prior to sending warranty product Claims for lost shipment damaged shipments or other problems regarding freight must be made directly to the responsible carrier To obtain warranty service on Hindle Exhaust System products mail the product prepaid and a copy of your dated sales receipt as proof of purchase together with a note explaining the reason for repair to this item to Hindle Products
3. HINDLE PRODUCTS LTD 140 North Port Road Port Per ry Ontario LSL 1B2 CANADA Tel 905 985 6111 Fax 905 985 7349 General Mounting Instructions for 2011 2012 KAWASAKI NINJA 400 Slip On hank you for investing in a Hindle Exhaust System Performance quality and sound is what we re all about Below you will find instructions to mount a Hindle Exhaust Slip On on a 2011 2012 Kawasaki Ninja 400R slip on adapter part number N400SOSS hould you have any questions about installation please do not hesitate to contact us and we would be happy to help out LEVEL OF DIFFICULTY MEDIUM TIME REQUIRED 1 1 5 HOURS TOOLS NEEDED To install the HINDLE 2011 2012 KAWASAKI NINJA 400R slip on proceed with the following directions 1 Remove fairings as per service manual 2 Remove right side driver s foot peg bracket 3 Undo O2 sensor plug from harness See Im age for reference 4 Remove stock muffler from head pipe See Image 2 for reference 5 Install new muffler hanger bracket with supplied 40mm bolts nuts and washers See Image 3 for reference 6 Install Hindle elbow onto stock collector See Image 4 for reference 7 Remove O2 sensor from stock muffler See Image 5 for reference 8 Install O2 sensor onto Hindle elbow See Image 6 for reference 9 Install Hindle muffler onto elbow and secure with springs supplied Use spring puller tool provided to attach springs Do not use pliers a
4. s this will damage the springs See Image 7 for reference 10 Install muffler strap onto muffler and attach to hanger braket with supplied 20mm bolt nut and washers See Image 8 for refer ence 11 Re install fairings and driver s foot peg bracket 12 Check clearance around installed exhaust i e fairing frame and brake lever clearance 13 Clean exhaust of oils and finger prints before running engine 14 Start motorcycle and let idle from 10 15 minutes in order to pre heat the muffler pack ing Then let muffler cool down completely 15 Congratulations on the installation of your Hindle Kawasaki Ninja 400R Slip on See Image 9 for reference WARNING Exhaust system s and muffler s may be hot when engine is has been running Take preventative mea sures with the handling of any Hindle system or Hindle muffler Allow the engine to cool before installing or removing the exhaust system and or muffler Severe burns bodily injury and or death may occur A WARNING Keep flammable materials away from exhaust at all times A WARNING Exhaust gas contains poisonous carbon monoxide that can rapidly accumulate in an enclosed or poorly ventilated area If inhaled it may cause serious injury or death Start and run the motorcycle in a well ventilated area 12 MONTH LIMITED WARRANTY AND LIABILITY DISCLAIMER Hindle Products Ltd warrants this product free from defects in material or workmanship for a period of
Download Pdf Manuals
Related Search