Home

Industrial IT, 800xA - Device Management, PROFIBUS, Configuration

1. C DO930 DTM Al830 DTM 40920 DTM DP310 DTM C als20 DTM C A0910 DTM C A0820 DTM m Al835 DTM C 900 DTM 900 DP 41920 DTM C DOS10 DTM A1931 DTM AC800M DTM 0 0 0 0 D a H 2 ABB TZIDxx TZID_C ABB THO2 a Basic HART DTMs Generic HART wll Selected Device Type Manager Device Definition The user can use the DTM tab to assign a specific DTM to a device object in the object type structure DTM Data Exchange OPC Settings Overview Vendor es o Name Basic HART DTM Version Date FDT Version r Selected Device Type Vendor Device Type Version Date Bus Protocols Supported Languages German Germany English United States Figure 30 DTM selection on the object type Once the Device Definition aspect has been selected the Fieldbus Builder PROFIBUS HART browses the computer Registry for all installed DTMs Once the Fieldbus Builder has completed its search of the Registry the installed DTMs are sorted according to manufacturer The selected DTM displays the data it contains relating to the vendor and device type The installed DTM is now called for the first time This is a way of checking that the DTM has been installed correctly The initial execution of this function may take some time depending on the number of installed DTMs New installed DTMs can only be shown a
2. The Fieldbus Builder PROFIBUS HART aspect system can be found under Aspect System Structure gt Fieldbus Builder PH G Aspect System Structure i Favorites Aspect System i Fieldbus Builder PH Aspect System yw Device Definition Aspect Type yy Device Management Aspect Type wy Fieldbus Management Aspect Type wy Module Definition Aspect Type T Module Management Aspect Type yw Property Management Aspect Type Fieldbus Builder PH Aspect System A OPC Configuration Aspect Type 1481 File Viewer Asnect Svstem A Figure 28 Aspect system structure 3BDD011750R4101 61 62 Fieldbus Builder PROFIBUS HART Aspects Section 3 Fieldbus Builder PROFIBUS HART As illustrated in Figure 28 the Fieldbus Builder PROFIBUS HART aspect system is divided into two system entries The first system entry contains aspects required for working with device objects and for their configuration The second system entry contains an aspect for accessing internal device data via OPC communication Unless described in more detail the aspects of the Fieldbus Builder PROFIBUS HART are configured and may not be modified by the user ABB Service must be informed before the user makes any changes to the aspects described in this document 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Aspects in the object type structure Aspects i
3. Root FBB PH Settings 139 wy ge Name Value Type Description Readable R Permission Aspect_Server_1 C 4BB Industrial IT Data Engineer IT Fieldbus Builder PH String Common access Pa Yes Aspect_Server_3 String 2nd alternative Acc Yes Aspect_Server_2 String 1st alternative acce Yes Connectivity _Server_1 String Share to Access Pa Yes Connectivity_Server_2 String Share to Access Pa Yes Coonectivty_Server_3 String Share to Access Pa Yes Figure 8 FBB PH settings Aspect in the Control Structure 3 Change the path below the Value tab to the directory of the specific server using the UNC path setting If no redundant or fewer servers are entered in the 800xA System leave the Value tab empty This configuration needs to be carried out once per system The paths which are included are stored in the Aspect Directory where they are available to each connected client Example for an Aspect Server aspect server Fieldbus Builder PH Please ensure that the Fieldbus Builder PH folder is shared on each Aspect and Connectivity Server 3BDD011750R4101 33 System 800xA Server Path Settings Section 2 Getting Started 4 Click Apply All Aspect Server and Connectivity Server with its share folder shall be included A in the FBB PH Settings aspect If more Connectivity Server then configuration rows of the FBB PH Settings are connected to the system additional rows can be included manually 5 Change to the configuration mode of the FBB PH Setti
4. D0910 DTM 1931 DTM 2 AC800M DTM 2 Basic HART DTH Generic HAF ABB TZIDxx TZID_C ABB THO2 Ta r Selected Device Type Manager Vendor ABB Name JBasicHARTDTMs o Version Date FDT Version r Selected Device Type Vendor Device Type Version Date Bus Protocols Supported Languages German Germany Enalish United States Figure 32 OPC access settings 3BDD011750R4101 Device Definition 67 Device Definition Section 3 Fieldbus Builder PROFIBUS HART Overview The Overview tab lists the DTMs installed on the system node with DTM specific information Should service be required the overview provides a means of evaluating the required DTM information quickly DTM Data Exchange OPC Settings Overview om 0 D108 ABB 2003 04 01 Dx910 D1085 ABB 2003 04 01 Dx910 DIOS 81 ABB 6 4 4 2003 04 01 DX910 DIO 8l ABB 7 4 4 2003 04 01 40810 ABB Not applicable C1920 CIPB ABB 2 4 4 2003 04 01 C1920 CIPB C ABB 45 4 4 2003 04 01 cis40 ABB Automation Not applicable i 40930 404H ABB 27 4 4 2003 07 04 40930 404H 1 ABB 28 4 4 2003 07 04 40930 404H 4 ABB 29 4 4 2003 07 04 40930 404H 8 ABB 30 4 4 2003 07 04 AIS10 A14 ABB 35 4 4 2003 04 01 ABB Not applicable ABB Not applicable i ABB i 2001 12 18 ABB Not applicable i AI950 T14 R ABB 40 44 2003 04 01 A950 T14 T ABB 4 4 2003 04 01 D0930 R06
5. Fieldbus Management This aspect opens the graphical user interface of the PROFIBUS HART Fieldbus Builder FBB PH Settings This aspect enables private DTM data synchronization through the system Module Definition For DTMs with internal module planning This aspect is used to assign a module with a unique ID for the corresponding master DTM and is only visible in the object type structure It is required for modular DTMs module planning takes place within the DTM in order to identify the modules in the Plant Explorer uniquely and to position and present them Module Management For DTMs with internal module planning This aspect is used by the Fieldbus Builder PROFIBUS HART to save instance specific data for a module and is only visible in the object type structure PROFIBUS Management This aspect allows the access to the AC 800M CI854 web server for all connected PROFIBUS C1854 modules on this controller 60 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Builder PROFIBUS HART Aspects Table 3 PROFIBUS HART Fieldbus Builder aspects Aspect Function FBB OPC Configuration For internal 800xA use only Basic aspect containing the configuration rules for the OPC instance data Property Management For internal 800xA use only This aspect allows access to the instance data set of the DTM if the DTM supports this function It can be used for bulk data applications
6. Move Up Move Down Moye To TZIDC 12M6 PNOID 0639 TEx12 12MB PNOID 04C4 Search Alt F12 ABB_PDP22_FBP_DP_v1_0 Redundancy TB82 12MB PNOID 5101 X Delete Del Ai MET_ND9000PA_YPO_v1_0 HI2600 12MB PNOID 0528 ABB_267 269_YPO_v1_0 ABB_TZIDC_110 210_YPO_v1_0 Figure 24 Select Device in the CBM project 6 Select the PROFIBUS address of the object placed e g 20 from the pull down menu 7 Click OK 8 To place a specific device module below the PROFIBUS master object select the PROFIBUS master object 9 Right click on the mouse and select New Unit gt GSD Import gt Module 10 Browse to the required device module e g ABB_TFx12_Temp1 11 Select the slot number of the module placed e g 1 in the pull down menu 12 Click OK The device module is instanced both in the Plant Explorers Control Structure and in the Control Builder M project 3BDD011750R4101 49 Configuration and Commissioning of PROFIBUS Device Objects Section 2 Getting Started Configuration and Commissioning of PROFIBUS Device Objects 50 There is no synchronization of device configuration data between Control Builder M project and the Device Type Manager DTM Device parameter which may be necessary for both parts must be configured twice in the Control Builder M project and the DTM For example The device modules which are configured in the Control Builder M project are not automatically available in t
7. B applications Applic Hardware Control 5 0 pmeco TPE 1 Etherne 2 Etherne 3 Com 4 Com 11 Module gt 0 BENE PA ica 2 AOE C1854 20 C1840 1 arse 2 ave Oe ee f Applications Application Group Default Aspect New Aspect Insert Object Join Object Change Type Set temporary root Cut Copy Paste Paste special Delete Refresh Tree Nodes Project Explorer Hardware Editor Clear Latched Errors and Warnings Figure 2 Control Structure with fieldbus topology 3BDD011750R4101 25 Preparing device object types for usage Section 2 Getting Started Preparing device object types for usage 26 The PROFIBUS device objects are present in the object type structure once the system extensions of the PROFIBUS Device Integration Library have been loaded into the 800xA system Some device object types which have been implemented in the 800xA system using the PROFIBUS Device Integration Library have a device specific DTM for device configuration parameterization and operation The device specific DTM may also include licensing whereby the end user has to purchase the license separately directly from the device manufacturer The PROFIBUS Device Integration Package copies the installation routines of the DTMs to the local hard drive Afterwards the DTMs can be executed via the relevant device object type In case that the Device Library Wizard is used to extend
8. Plant Explorer Workplace la x ng Asset Monitoring work Control Network 5 Assat Monty 2 Create Faut Ricot F itis Relredh Ties Nade Toi IN c coin marag AEB PEL REY Type Reference Orire Perameterice BM Alar it Brera Figure 23 Device Functions 4 The sub menu of Device Functions indicates the current mode will be Communication disabled for fieldbus configuration The sub menu allows also changing the mode by selecting the menu item 3BDD011750R4101 Section 2 Getting Started Instancing of PROFIBUS Device Objects Instancing of PROFIBUS Device Objects Instancing PROFIBUS device objects can be performed either in the Plant Explorers Control Structure or in the Control Builder M project window Field device of the PROFIBUS Device Library are integrated into the fieldbus topology as follows The PROFIBUS Device Integration Library include PROFIBUS device objects prepared for use of vendor specific DTM In this case the DTM has to be installed manually before instantiation For a description of how to install specific DTMs see Installation of Device Type Manager DTM on page 27 Vendor specific DTMs sometimes include a license mechanism to run the DTM without limitations Only the DTM software is part of the Device Integration Package the specific license of a DTM not The DTM license has to be ordered separately from the DTM vendor Licenses for a DTM are not included in t
9. Device Library Wizard optional VEL VIE Wonen niona A E A E E i auatoaen 101 System REQUISMENUS sesinin arra ai ran E E E RR R ERER 101 Pr requisiteSiorspy ustivo n E E E Na ESOS RS 102 How to use the Device Library Wizard s esessesesssseerssrerssrsrrerssreresrerenresrnrrsrnsrsrsrrsrret 102 INDEX gisee as abe Veesbev ses E E Meetreat cs ne neecunab ran tease remands 105 8 3BDD011750R4101 About This Book General This book describes how to use the PROFIBUS Device Integration in detail For the latest information please also refer to the corresponding Release Notes Use of Caution Information and Tip Icons This publication includes Caution and Information where appropriate to point out safety related or other important information It also includes Tips to point out useful hints to the reader The corresponding symbols should be interpreted as follows concept discussed in the text It may indicate the presence of a hazard which could result in software corruption or damage to equipment property The information icon alerts the reader s attention to pertinent facts and The caution icon indicates important information or a warning related to the A conditions y The tip icon provides advice about how for example to design your project or use a certain function Although Caution hazards are associated with equipment or property damage it should be understood that operation of damaged equipment could under ce
10. Industrial 800xA Device Management PROFIBUS System Version 4 1 Operations Engineering Control an and 1 0 il Asset aati inforrrament prod jement O safety Applicat a Industrial T Industrial 800xA Device Management PROFIBUS System Version 4 1 Configuration NOTICE The information in this document is subject to change without notice and should not be construed as a commitment by ABB ABB assumes no responsibility for any errors that may appear in this document In no event shall ABB be liable for direct indirect special incidental or consequential damages of any nature or kind arising from the use of this document nor shall ABB be liable for incidental or consequential damages arising from use of any software or hard ware described in this document This document and parts thereof must not be reproduced or copied without written per mission from ABB and the contents thereof must not be imparted to a third party nor used for any unauthorized purpose The software or hardware described in this document is furnished under a license and may be used copied or disclosed only in accordance with the terms of such license Copyright 2003 2005 by ABB All rights reserved Release May 2005 Document number 3BDD011750R4101 TRADEMARKS Registrations and trademarks used in this document include Windows Registered trademark of Microsoft Corporation Activex Registered trademark of Microsoft
11. ABB 15 4 4 2003 04 28 Al830 ABB Not applicable il 40920 A04 ABB 39 4 4 2003 04 01 DP910 F12 P ABB 10 4 4 2003 04 01 NPS1N Fl FI ARR K AR 20N3 N4 M1 4 Figure 33 Overview of installed DTMs A No settings can be made in this tab 68 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART DIP Fieldbus Builder PH Extension Definition DIP Fieldbus Builder PH Extension Definition The DIP Fieldbus Builder PH Extension Definition aspect is linked to field device objects in the object type structure when the Device Integration Library system extension is loaded The aspect contains instantiation rules for the device object which are tested by the Fieldbus Builder PROFIBUS HART when the type is inserted in the Control Structure This aspect does not require any further configuration by the user 3BDD011750R4101 69 Aspects in the Control Structure Section 3 Fieldbus Builder PROFIBUS HART Aspects in the Control Structure Fieldbus Builder PROFIBUS HART user interface The main user interface for the Fieldbus Builder PROFIBUS HART is the Control Structure of the Plant Explorer Within the Control Structure the Fieldbus Builder PROFIBUS HART is controlled by means of the following aspects e Fieldbus Management e Device Management All plans for field devices including eventual startup are to be made in the Control Structure of the Plant Explorer with the Fieldbus Management aspect The PROFIBUS HART Fieldbus Bui
12. Verify Selecting the verify option in the Fieldbus Management menu compare the online device date with the inside the 800xA stored offline configuration data set The result is true if the data set are equal otherwise false A If the verification result is false an up or download is recommended for data synchronization Download and Upload When several devices are selected the PROFIBUS HART Fieldbus Builder starts a batch process for up or download which is processed sequentially Execution of the batch process continues even if errors occur in individual DTMs Each event faulty successful execution is documented in the Fieldbus Management status window If an error occurs an error message is displayed after the end of the batch process to indicate that the batch process is faulty A Loading errors can arise if this function is not supported by the DTM e g S800 modules or if the DTM cannot establish a connection to the device Export and Import The export file of an instance data record is saved with a time stamp in a folder which is specific to the Device Object This makes it possible to build up a device configuration history Exported device data set can be imported again by selecting the specific export file The export and import process is carried out manually by the user A Further information on the Fieldbus Management Aspect can be found in Fieldbus Management on page 70 3BDD011750R4101 51 Configuration and
13. communications interfaces for e g PROFIBUS as well as the I Os local remote in the Control Structure a Control Network must first be set up The Control Network also comprises the assignment of the relevant OPC Server to a Connectivity Server Creating an AC 800M Controller 36 1 Switch to the Control Structure in the Plant Explorer 2 Select the Root node 3 Right click on the mouse and select New Object t Control Structure E Asset Monitoring Server Asset Monitoring Ser Lost Default Aspect New ject New Aspect Insert Object Figure 13 Select New Object 3BDD011750R4101 Section 2 Getting Started Creating an AC 800M Controller 4 Browse to the Control Network object Object Types gt Control System gt AC SOOM C Connect gt Control Types select Control Network and enter a new name if required xi Common Product Type Structure f Object description Generic Type E Object Types E 3 rd party OPC server support ABB System Asset Monitors Asset Optimization B Control System E AC 800M C Connect Additional Arguments E Control Types Access Variables ontrol Netwa Object Icon Contral Network Eal Control Program Project Templates Single Control Module Name oe J Control Network VV show al TO List presentation Advanced Set GUID Cancel Help Figure 14 Select Control Network as the new obje
14. Commissioning of PROFIBUS Device Objects Section 2 Getting Started Synchronization of DTM specific data through the 800xA system DTMs installed on each client may store their private internal data in a separate file on the hard disc This private data could be e g log files last open view etc However private internal data does not mean the instance data set of the device parameter As a default the DTM stores the private data locally in the shared folder directory on each client A The shared folder directory is described in Industrial IT 800xA System Post Installation Setup 3BUA000156R4101 manual section Shared Folder for PROFIBUS and HART Device Integration Synchronization of DTM specific data shall be executed by the user after finishing instancing and configuration of device objects in the Plant Explorers Control Structure To synchronize the private DTM data the following steps must be carried out by the user 1 Open Plant Explorer workplace 2 Switch to the Control Structure 3 Open the substructure below the Project object 4 Select a device object below which hold a Fieldbus Management aspect 5 Select the Fieldbus Management aspect 6 The Fieldbus Management view appears in a window of the Plant Explorer A Double clicking on an Aspect in the Aspect window will open up its contents in a separate process window a Select the Fieldbus Management node in the Fieldbus Management tree 8 Cl
15. Corporation PostScript Registered trademark of Adobe Systems Inc Acrobat Reader Registered trademark of Adobe Systems Inc Industrial IT Trademark of ABB TABLE OF CONTENTS About This Book General ari r E A I E Aa ERa E A EER EET ES ri 9 Use of Caution Information and Tip ICONS ee eeseesseeeseeeeeeceseesenecseeeeeeseeenneeeneersas 9 Document Conventions cccsssccsssseceeececeescecseeeceseeecseeeeeesseeeesaaeessseeeeseseesseseeseeeeens 10 Termin logy vi oon eare E EE a e e a E TE EEE AEE S EN Ep SENESE 11 Relevant Documentatii sses e eei aere o EEE EA EEEE EE EERE 13 Section 1 Introduction Produ t OyeryieW seewiicsrcosia eiee ienei ae eE a a a SEEN aE E E ENE 15 Notes Tor USCs scr e n e Ge E E E E AS 17 Components and Functions 0 0 cece cceeeeeseceeceecseeeseceseeaeceseeaeeesecseeeaeseaeesesseeeseeeaeentees 18 Fieldbus Builder PROFIBUS HART 00 eeeeseceeeeseeeeeeeeseeeeetesenaeeneseeeeaes 18 PROFIBUS Device Integration Library 0 0 0 eeseeeeceeeeeeneceaeeeeeeaeeeeeeaees 18 Product Documentation eee eee eee seeeseceeeeseeseeeseeseeeseceaeeaeseeeeaeeaees 18 Asset Monitoring sinnini niara ara EE 19 Maintenance Management ssssessseeseesesreresrerrerrsrrresreereresresrerrerrsrerns 19 Device Type Manager isseire riese irei sri 19 Device Library Wizard and Device Object Types optional sseesessesesesssrrssrerssrerserereee 20 New Ti Wis Release a iis Jiexcsars sapescasazesnci icons sovevededvatu
16. False Name M Hardware Control Hardware Group Object Icon 07 13 2001 12 2 Obje True Object Icon 0 Pm860 TP830 Property Translations Extended 11 28 2001 03 1 Prop True Property Transl 1 C1854 E Tasks Control Task Group E E Libraries Library References Lost And Found Controller_1 PROFIBUS Mane amp 1 amp EBSERVER Service Diagnosis for CI654 ws 01 06 oste ape 22 2002 i CEX Action Slot CEX Slot 1 al SetAddress Change Address 2 of Slave 3 LiveList Address List of all 4 connected Devices Figure 39 CI8S54 Web Server via PROFIBUS Management aspect 3BDD011750R4101 85 C1854 Web Server Section 3 Fieldbus Builder PROFIBUS HART Pre configuration the Web Server Make sure that the browser settings for the connection for example no proxy server for the controller address is OK and that the controller is accessible from the PC Therefore you have to set the parameter Routing method to default gateway in the settings for the controller Set the following settings inside the standard web browser e g Microsoft Internet Explorer This option is available via start menu e Start gt Settings gt Control Panel gt Internet Options e Open Internet Options e Select tab card Connections e Select button LAN Settings Set tick mark Bypass proxy server for local addresses Local Area Network LAN Settings 2 x Automatic configuration Automatic
17. Fieldbus Topology eee cescesseseceseceeeeseseeeeseeseesseessenaeens 41 Communication Interface CI854 ee seeesseseseeeeeseeesrsrsresseerrsrsresrsresrerenresrneesreet 41 Hardware Definition File Integration eeseeeseeseeseeeseesrestserterrseessrrsrrsrereresreeees 42 Pre settings for Instantiation ssssssrscsresrirersiscsrreriesoissss enisinia 45 Communication mode via Fieldbus Management aspect 45 Communication mode via Device Functions menu eee 46 Instancing of PROFIBUS Device Objects eee ec eeeeseeseeeseeseeeeeeseeeaeeasenaeeaes 47 Plant Explorers Control Structure eee ceeeeeceeeeeceeeeeeeseeesees 47 Control Builder M project eee esceseesseeseceeeeseceseeseeeeeeseesaeeseens 48 Configuration and Commissioning of PROFIBUS Device Objects 0 50 VeRy sicrie ER E E 51 Download and Upload s sseseeseeeeeeeeseessereresresrsresrsrestsrrerrerrsreresreseee 51 Export and IMPOTt nessies aspin a E S 51 Deleting Device Objects 00 secs sesseessceesescessesossoescosteessbensecersesentessaoeetinedsare 52 Starting the Device Type Manager DTM sssssessesessssserssrrrerrsrerrsresresrsrrsrsresrerreresreresrent 53 Open DTM via Device Management Aspect sessesesesreereresrerrsrrerssrerrsreresrrrese 54 Open DTM via context menu in the Control Structure eee eee 55 Section 3 Fieldbus Builder PROFIBUS HART CVELVICW socors ereer israr a a cede EE dabnen tebe qnened teaser RE EE E
18. This subsection describes the first steps to copy hwd files of the used PROFIBUS devices to the related path of the Control Builder M project The integration of the hwd file is described in Hardware Definition File Integration on page 42 Two possibilities are available to copy hwd files to the Control Builder M project path e Inthe object type structure on the master object type via Update Hardware Definition aspect This aspect allows upload hwd files if a complete new AC 800M control network shall be setup and if the AC 800M project is not placed yet in the Control Structure e Inthe Control Structure on the CI 854 object instance via Update PROFIBUS Device HWD File aspect This aspect allows upload hwd files during commissioning if a AC 800M project and a C1854 object is already inserted in the Control Structure Update Hardware Definition The aspect Update Hardware Definition is only available in the Plant Explorers object type structure at the PROFIBUS master object type The following steps have to be carried out 1 Open Plant Explorer and switch to the object type structure 3BDD011750R4101 29 Preparing Hardware Definition files hwd for Control Builder M Section 2 Getting Started 30 Browse to the PROFIBUS master object type Object Types gt Control System gt AC 800M C Connect gt Controller Hardware Select the PROFIBUS master object type Object Type Structure M ABB Drive template basic Har
19. Time 87 D Delete Device Objects 52 3BDD011750R4101 INDEX Device Definition 60 64 Functions 45 Management 60 83 Module 49 Objects 73 Device Integration Center 89 Device Integration Library 57 102 Device Library Wizard 101 Device Type Manager 27 53 DIC 89 DIP Fieldbus Builder PH Extension Definition 69 Download and Upload DTM Data Set 51 Download Device 78 Download Selection 78 DTM 53 Expand 77 Export 77 Export and Import DTM Data Set 51 F Fault Report Submitter 99 FBB PH Settings 60 FBB OPC Configuration 61 FDT 1 2 User Roles 59 Fieldbus Builder PROFIBUS HART 57 Fieldbus Builder Status 80 Fieldbus Management 45 60 Fieldbus Management Node 73 to 74 Fieldbus Tree Window 72 G GSD 42 105 Index H Hardware Definition 29 Hardware Object 41 Help 79 HWD 29 Import 77 Internet Options 86 IP Address 85 LAN Settings 86 LiveList 87 Maximo Equipment ID 99 Message window 81 Module Definition 60 Module Management 60 O Object Information Window 80 Online Compare Device 78 Online Compare Selection 79 Open Project 43 P Preconfigured Object Types 90 Prerequisites 102 PROFIBUS Device Integration 57 DTM Setup Tool 27 Interface 85 Management 60 85 Master Object 47 Master Object Type 30 Object Types 90 Protocol 15 106 Property Management 61 Proxy 86 R Root Node 36 SetAddress 87 SlaveDiagnosis 87 Status Bar 82 System Requirements 101 T Tool Routing 39 UNC Path 33 Uploa
20. Type Group ic Be Control Types Control Types Group J Controller Hardware Hardware Type Group HI2600 12MB PNOID 0528 Hardware Tyg E 200 ANN Hardware Type GM ennn0R1 Hardiuara Tuna Figure 46 Device specific catalog for PROFIBUS A Instantiation new devices in the 800xA Plant Explorers Control Structure as well as in the Control Builder M project is described in Section 2 Getting Started 100 3BDD011750R4101 Section 5 Device Library Wizard optional Overview For easy integration of fieldbus devices into the Industrial IT 800xA environment ABB provides a continuously increasing set of pre integrated PROFIBUS device types in the form of a single device object types The Device Library Wizard is a tool that is used for adding these separately delivered device object types to the device libraries of an 800xA system The Device Library Wizard is not an integral part of the PROFIBUS Device Integration and must be downloaded manually from the ABB Solutionsbank Solutionsbank is accessible via internet link e http solutionsbank abb com System Requirements The Device Library Wizard will be installed and operate on an Industrial IT 800xA system node The system requirements relating to the operating system CPU performance memory capacity etc are more than adequate for the installation and operation of the Device Library Wizard software There are no additional or different requirements to the hard and softw
21. an object from scratch for every valve in a plant you can define a set of valve types and then create all valve objects of these instances Asset Monitor Application responsible for retrieving data from and interacting with multiple data servers OLE for Process Control OPC servers etc It analyzes the data and when necessary issues an Asset Condition Document and notifies the process portal of the detected condition Device Type Manager Software component device driver for configuring DTM diagnosing forcing and displaying the measured variables etc of a field device It is familiar with the way the device works and supplies device specific documentation 3BDD011750R4101 11 About This Book Term Acronym Description Device Description Language DDL Interpretable language for the formal description of device parameters Frame Application FA Frame application runtime environment in accordance with the FDT specification for operating DTMs Fieldbus Builder FBB ABB aspect system for fieldbus and DTM management implementing a Frame Application according to specification FDT 1 2 Field Device Tool FDT The FDT concept describes the interface between a Frame Application and the device specific software DTM Device Type Manager of the device manufacturer It enables devices produced by different manufacturers and different fieldbuses to be integrated in a
22. commissioning or for service purpose in the case of an error The Web Interface is accessible via a standard web browser like Microsoft Internet Explorer or Netscape Navigator as well as the PROFIBUS Management aspect accessible via the AC 800M Controller object Communication enabled at first time The Fieldbus Builder PROFIBUS HART add automatically a new PROFIBUS Management aspect to the controller object when the operating mode is set to To start the Web Interface enter the IP address of the controller in the address bar of the browser and press enter or select the PROFIBUS Management aspect fi System MySystem Workplace Plant Explorer Workplace i i8j xj D A Aa No Fiter E PE P control Structure Aspects of Controller_1 Modified Desc Inherited Category name _ Root Domain PROFIBUS Management 04 2 12 1 False EE Control Network Control Network E ac 800M Type Reference 03 13 2002 03 2 False AC 800M JS MyProject Control Project alarm List 11 19 2001 11 1 Alar True Alarm and Even f Applications Application Group Control Properties 03 14 2002 11 0 Cont False Control Properties 5 E Controllers Controller Group PE Control Structure 03 13 2002 03 2 Thes False Control Structure E Controller _1 AC 800M E controller 03 13 2002 03 2 Cont False Controller W E Applications Application Referenced Name 03 13 2002 03 2 The
23. configuration may override manual settings To ensure the use of manual settings disable automatic configuration IV Automatically detect settings I Use automatic configuration script Address mM Proxy server IV Use a proxy server Address Port so Advanced IV Bypass proxy server for local addresses ma Figure 40 Bypass proxy server for local addresses Make sure that the tick mark is set for o Bypass proxy server for local addresses 86 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART C1854 Web Server Web Server functionality Starting the Web Interface at first you get a list of connected CI854 CI854A in the field CEX Slot Select with a left click the position you want to operate the diagnosis for This brings up a list with the following action buttons 3BDD011750R4101 SetAddress Use this service to change the address of a connected PROFIBUS slave device LiveList Use this service to see which devices are connected to the PROFIBUS Cycle Time Use this service to read the actual measured cycle time for the running PROFIBUS GeneralStatus Use this service to get a general overview about the running PROFIBUS MasterSettings Use this service to see which settings are actual loaded in the CI854 CI854A PROFIBUS master unit SlaveDiagnosis Use this service to see which diagnostics are currently present in the slave unit Nn laveConfig se this service to g
24. function is only available in Communication enabled mode Online This function calls the object DTM Compare without GUI The DTM ensures that the Device online data is read from the field device and compared with the instance data The result Compare finished with Data equal Data not equal with a list of differences part of the DTM is logged in the message window In the event of conflicts errors in the data records a detailed analysis can be carried out by calling the DTM with its GUI The function is only available in Communication enabled mode 78 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Management Context menu Field Function Online This function calls the selected object Compare DTMs without GUI The function is the Selection same as Online Compare Device but here for the complete selected device objects The function is only available in Communication enabled mode Help Calls the help function 3BDD011750R4101 79 Fieldbus Management Section 3 Fieldbus Builder PROFIBUS HART 80 Object information window The object information window contains detailed information about one or more device objects according to the selection in the fieldbus tree window Principally during a bulk process the process status as well as information about the individual device objects will be displayed to the user Every device displayed is set up as a dynamic element
25. informed before the user makes any changes to the aspects described in this document ABB cannot guarantee an operable 800xA system if aspects of device object types from the Device Integration Library are modified manually Only tested software DTMs may be installed on the system computer All software supplied in the Device Integration meets this requirement Additional information can be found in Section 4 PROFIBUS Device Integration Library 3BDD011750R4101 17 Components and Functions Section 1 Introduction Components and Functions Fieldbus Builder PROFIBUS HART The Fieldbus Builder PROFIBUS HART is the main component within the Device Integration package It forms the FDT compliant interface between Process Portal A as a part of the 800xA core system and the field devices represented by its DTMs Device Type Manager The main tasks for PROFIBUS devices are e Managing add move remove or copy PROFIBUS devices connected to the AC 800M CI 854 e Topology planning down to PROFIBUS devices e DTM call up from System 800xA clients e Comparison of field device internal and instance data Upload download and commissioning Please see Section 3 Fieldbus Builder PROFIBUS HART for detailed information PROFIBUS Device Integration Library 18 The PROFIBUS Device Integration Library contains preconfigured ABB and third party field device objects enhanced with the essential Aspects for e Product Documentation
26. placed e g 7 in the name box Modules always start at slot 1 13 Click Create The device module is instanced both in the Plant Explorers Control Structure and in the Control Builder M project Repeat steps 9 to 13 until all of the desired modules have been placed on the remote T O The above steps should be applied analogously for instancing of an S800 and S900 Remote I O In this case the S800 and S900 modules and the specific gateways are selected Please go ahead with Configuration and Commissioning of PROFIBUS Device Objects on page 50 Alternative the procedure described below can be performed to instantiate PROFIBUS device objects Control Builder M project 1 Open Control Builder M as described below Open Plant Explorer workplace Switch to the Control Structure Browse to the Control Project object Select the Control Project Object Right click on the mouse and select Open Project 3BDD011750R4101 Section 2 Getting Started Instancing of PROFIBUS Device Objects Switch to the Control Builder M project window Browse to the C1854 object Select the C1854 object Mi ee Ge Right click on the mouse and select New Unit gt GSD Import gt Device a f Libraries B Applications J Controllers E Controller_1 1 0 0 172 16 4 52 s Access Variables I Hardware AC 800M 0 Pm864 TP830 re irs Tasks Editor Enter H E Connected Ap Clear Latched Unit Status
27. single system Currently supporting fieldbus protocols for PROFIBUS and HART Highway Addressable Remote Terminal HART Digital communication protocol developed for applications in industrial process control Graphical User Interface GUI Graphical user interface OLE for Process Control OPC Standardized interface between client and server applications for data exchange based on the Microsoft basic technologies COM DCOM not restricted by computer capacity The advantage of OPC is that field devices and applications from different manufacturers can now communicate with each other without special modifications having to be made 3BDD011750R4101 About This Book Relevant Documentation Term Acronym Description System Extension options A solution or product developed with the Aspect Integrator Platform might typically contain several aspect systems services object types and aspect objects The System Extension mechanism enables a whole set of corresponding definition files to be read in at once It makes it easy to load complex add on solutions as View Aspects can be presented in a number of ways depending on the task performed e g viewing or configuration Each presentation form is called a view Relevant Documentation The table below contains a list of relevant documentation Title Description Industrial IT 800xA Device Management HART Co
28. the cyclic communication documentation CMMS and Asset aspects Optional a Device Type Manager DTM is assigned to the master object type For instantiation of new device types in the Control Structure only the master object type shall be used Module object types can only be placed below master object types The name of the master object type are described in the product release notes The PROFIBUS Device Library is continuously enhanced For updates on the current library content please refer to ABB web page http www abb com controlsystems D The online version of this document directly guides you to the corresponding web page Otherwise please select System 800xA Device Management and then Device Integration Center on the Control Systems homepage 3BDD011750R4101 Section 4 PROFIBUS Device Integration Library Functionality Functionality The preconfigured device object types enable each device to e access device specific components for configuration commissioning and diagnostics via Device Type Manager access to device specific documentation e access 800xA System functionality Alarm and Event Lists Audit Trail e access Asset Optimizer Asset Optimizer allow plant personnel to collect compare and monitor field device data in order to accurately assess equipment conditions A For a complete list of currently supported devices and functionality please refer to the Release Notes of this product listed in
29. 00xA system Section 2 Getting Started e The following system extensions have been added AC 800M C Connect Fieldbus Builder PROFIBUS HART HART Device Integration Library Basics mandatory for DTM communication The required license is covered by the PROFIBUS Device Integration PROFIBUS Device Integration Library Basics PROFIBUS Device Integration Library Asset Monitoring optional requires Asset Optimization installation and loading of the relevant system extensions e The Plant Explorer Workplace has been started e The user has configuration and download permissions Fieldbus topology in the 800xA system 24 Once an 800xA system has been started a fieldbus topology starting at the controller and ending at the field device can be created in the Control Structure of the Plant Explorer Starting with the root node the simplest example of a fieldbus system for PROFIBUS and HART is set up as follows using the Plant Explorer context menu right mouse button 3BDD011750R4101 Section 2 Getting Started Fieldbus topology in the 800xA system Control Network gt Control Project gt Controller Group gt AC 800M gt Field Devices ES Control Structure Asset Monitoring Server Asset Monitoring Server B Root Domain S E control Network Control Network EJB Project Control Project E Controllers Controller Gror E J Controller_1 AC 800M S9 Access Variables
30. 1895 c5 O 1895 C6 O 2 l895 C7 O 2 1895 c8 Figure 35 Fieldbus tree window The following functions are made available to the user e Modification of the Fieldbus Management mode Communication disabled enabled e Channel assignment of field device objects to the parent object I O mapping e Expansion of fieldbus topology in the fieldbus tree window e Selection of a number of field device objects for automated processing e Configuration of the OPC server for field devices e DTM functions including Download Upload Verify if supported by the DTM e Import and export of instance data for each device object A The properties described above can be accessed via context menus and can be displayed by selecting the object node and clicking with the right mouse button 72 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Management Context menu in the fieldbus tree Depending on the object node selected the user is offered various context menus The fieldbus tree differentiates between 3 types of node e Fieldbus Management node This is always the master node in the fieldbus tree window e Channel objects Instead of displaying address information channel objects are identified by an icon representing two arrows pointing in opposite directions e Device objects Device objects in the fieldbus tree always display a device address in the form of an integer number or a tag name A Context menu entrie
31. 34 3BDD011750R4101 Section 2 Getting Started System 800xA Server Path Settings 7 Press Add button in the window and select Property After from the menu Property After Sub Property Figure 11 Add Server 8 Change Name and Value field Name is the new name of the server e g Connectivity_Server_4 Value is the UNC path to the share folder GB Root FBB PH settings JS By ge Property Definitions Common access Path for DTM New Property ok Readable Yes Cancel Writable Yes Permission Administrate String C ABB Industrial IT Data Engin Name Yalue Type Description Read R Permission Write VWiPermission Aspect_Server_1 C 4BB Industr String Common acce Yes Yes Administrate Aspect_Server_3 String 2nd alternative Yes Yes Administrate Aspect_Server_2 String 1st alternative Yes Yes Administrate Connectivity _Server_1 String Share to Acce Yes Yes Administrate Connectivity _Server_2 String Share to Acce Yes Yes Administrate Coonectivty_Server_3 String Share to Acce Yes Yes Administrate Figure 12 New configuration of server 9 Confirm change with Apply A Steps 6 to 9 need to be repeated till all server are included in the aspect 3BDD011750R4101 35 Pre commissioning Control Networks AC 800M and OPC Section 2 Getting Started Pre commissioning Control Networks AC 800M and OPC In order to create an AC 800M controller network with the associated
32. 4 Extract the zip archives containing the device object types to Device Integration Library folders on all involved 800xA nodes Step 5 Read corresponding device object type product and system release notes for details and limitations Step 6 Perform fieldbus protocol specific pre installation actions Step 7 Add the designated device object types to the 800xA system utilizing Device Library Wizard on all involved 800xA system nodes 3BDD011750R4101 Section 5 Device Library Wizard optional How to use the Device Library Wizard e Step 8 Perform fieldbus protocol specific post installation actions A Detailed information about how to use the Device Library Wizard can be found in Device Library Wizard User Instructions 3BDD011857 Please read also the corresponding Release Notes 3BDD011750R4101 103 How to use the Device Library Wizard Section 5 Device Library Wizard optional 104 3BDD011750R4101 A AC 800M Controller 38 Aspect Control Properties 39 Device Definition 63 Device Management 70 FBB PH Settings 33 Fieldbus Management 45 70 Install DTM 28 Product Documentation 92 System Structure 61 Update Hardware Definition 29 Update PROFIBUS Device HWD File 29 Asset Monitoring 96 Optimization 96 Reporter 97 Viewer 97 C Channel Objects 73 CI854 Module 41 CI854 Web Server 47 CMMS Connectivity 98 Communication Disabled 45 74 Communication Enabled 45 74 Components 18 Context Menu 73 Control Network 37 Cycle
33. 9 26 2003 12 3 Provi False Device Manage H E Programs Program Group Fieldbus Management 09 26 2003 12 3 Mana False Fieldbus Manag E E Controllers Controller Group E Hardware Unit 09 26 2003 12 3 Cont False Hardware Unit E M Controller_1 AC 800M S23 Name 09 26 2003 12 3 The False Name SH Access Variables Access Variables g ws tnt ti Alia x PENE NE H E Applications Application Reference T gt 1 Fieldbus Management 1S 2 6 Hardware Control Hardware Group g os Fieldbus M lelabus Managemen o pmaco j TP830 een PE Figure 22 Fieldbus Management aspect 3BDD011750R4101 45 Pre settings for Instantiation Section 2 Getting Started 46 5 Click with the right mouse button and select Communication enabled the check mark will disappear from this item 6 The Mode icon switches to Communication disabled 7 The device object can be switched to Communication enabled mode by selecting Communication enabled in the context menu In Communication enabled mode the DTMs required for the communication sequence are started although they do not affect actual fieldbus communication In Communication disabled mode only the DTM for the selected object is called Communication mode via Device Functions menu 1 Select the CI854 object in the Plant Explorers Control Structure 2 Click with the right mouse button to open the context menu 3 Select Device Functions in the context menu CO
34. Appication Geop E Cortroters Controter Group E EE Cortroter_1 AC oun AY Access Voriables Access V 18 DBE arokaons Appication Reter B Hardware Control nardware Gl pina mar uare Definition Poverty Management PIL4I2004 1 04 UTERO B26 eb Property Traralaors Extended TAPIA 1K Yous True TPxi 1240 PNOID OCA Type Re E pree AOA 22244 Prom Foise Device Manage BIOH S t Mar False Finkbus Manag BYTNAZO0 3 26 t Cort Fakie Hardware Unt OMID Adit he Fakse Nene O 11 2004 9 26 Tose TPx12 12ND PN 10 42 2003 12 2 Tre Windows Apok S 5 pareria ARE 3 288 POP22 FBP DI H 16 c0 i Ret 18 9900 iF System Alarms and Everts Sy wA tacks Control Task Group Lort And Found E pet MU Net 1 HART MIIE Netvor 1 OPC Servers System Alarm and Event Group TEZI PA TFI2PA Figure 42 Selecting device s Product Documentation aspect 3BDD011750R4101 93 Accessing device specific documentation Section 4 PROFIBUS Device Integration Library 2 Selecting the device variant Product Documentation 11 11 2003 2 False DIPInstAsp Property Management 10 29 2003 5 For False Property Man 00A Y3HPB1041 Product Document v ea TZIDC_HART TZIDC 200_HART Figure 43 Select Device view 3 Select device specific document e g Product Data Sheet BLED4DT System Plant Explorer Workplace BEE e A FR Enter search
35. E 57 FDT 1 2 User Roles in the 800xA System ssseeesseesssreresrsersresresesrerrsresesrrstnsrsrreresreres 59 Fieldbus Builder PROFIBUS HART Aspects eee ecceceeseeseesseesecseeeaeeeecesecaeeeaeeaeeeaees 60 Aspect OVENVICW ss fas esteechees eedes ests dood eE A E E a AE R Ea 60 6 3BDD011750R4101 Table of Contents Aspects in the object type Structure eee eceeceeeeceeceseceeeeseeeesseseeecaessaeeaeeeeeaeeseeeatens 63 Device Definitioner keieren ian i an Ee ENA NEE ARA 64 DIM oneer ne E A R E AA 65 Data excham Ges iioa a EE EE NE 66 OPC Settings ecni a EE AAEE 67 Overy Wareena en a T A E ER E 68 DIP Fieldbus Builder PH Extension Definition eseseeseessseesssesresrsresresrrresrsresrs 69 Aspects in the Control Struct fe issisnsisicsmersriesseairinics sneren reseni 70 Fieldbus Builder PROFIBUS HART user interface eee ee eeeeseeseeeeeeeeeeees 70 Fieldbus Management nicieni E EEEE REN 70 Fieldbus tree window cescesseceseessecesceeereceseeeceeeaeeeseeseeeseneeeneeenae 72 Context menu in the fieldbus tree ee ee ceeeeeeeeeeeeneeeseeeeeeaeees 73 Fieldbus Management node cescessceeseeeteeeeceeneeceseeeeeseaeeeseeenaes 74 Channel object carioca vases etpeecap E E 76 De yiceobj ctoi ermon eo eaa E a E ERE 71 Object information Window sseessssessssseessesrsresrsresssstssrsresrsresresesresrsee 80 Message WINdOW ssie urssarases oean ersian sea ans sniene aE Ea a iaai 81 Status Dafis rieseni eie
36. If a device type is not available in the library please contact the Device Integration Center to request the integration of an additional device type The Device Integration Center will add the new device object to one of the next library versions Please contact the DIC for further information ABB Automation GmbH Device Integration Center Schillerstr 72 32425 Minden Fax 49 571 830 1871 Mail dic de abb com 3BDD011750R4101 89 90 Section 4 PROFIBUS Device Integration Library The PROFIBUS Device Integration Library provides preconfigured object types for corresponding field device types t Object Type Structure E E Object Types H 3 rd party OPC server support Object Type Group E ABB System Object Type Group E Asset Monitors Object Type Group Asset Optimization Object Type Group Ei Control System Object Type Group Be AC 800M C Connect Control Type Group ic Be Control Types Control Types Group ie Controller Hardware Hardware Type Group HI2600 12MB PNOID 0528 Hardware Tyg E 200 ANN Hardware Type E enn sori Hardiuara Tuna Figure 41 Preconfigured PROFIBUS object types For PROFIBUS object types are stored inside the Object Types gt Control System gt AC 800M C Connect gt Controller Hardware catalog This catalog level includes a master object type and the suitable module object types of the master object type The master object type contains device specific parameter for
37. M quis aiia AOUD DA v1 Type Reference y uiy Mimli iia S Asst Reporter Dam B ewe Tce mopot Me Jf B6r Bee BAe II0D MAAW om Figure 27 Device Functions 7 The DTM appears in a new window in front of the Plant Explorer 8 Other DTM views can be activated via the menu bar of the DTM window bar or if applicable via DTM specific menus 56 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Overview The Fieldbus Builder PROFIBUS HART is a component of the PROFIBUS Device Integration and can only be used in the Industrial IT 800xA system Device Integration products are available for the HART PROFIBUS and FOUNDATION fieldbus protocols Each product contains a Device Integration Library which together with the Fieldbus Builder contained in the product can be used for field device management The Fieldbus Builder PROFIBUS HART integrates the FDT DTM technology in the Industrial IT 800xA system and provides the infrastructure in ABB s Aspect Platform to access field devices coming with the Device Integration Library of the Device Integration products In accordance with the functionality of the DTM the Fieldbus Builder PROFIBUS HART accesses field devices for Configuration Parameterization Diagnostics Maintenance Documentation The current version of the Fieldbus Builder PROFIBUS HART supports the FDT 1 2 standard interface 3BDD011750R4101 57 Section 3 Fieldbus Builder PROFIBUS HAR
38. Management The Device Management aspect opens the associated DTM Device Definition in the main window with the instance data record A In Device Management the Fieldbus Builder PROFIBUS HART operates in the background and cannot be seen by the user Its primary task is to call the associated DTM and supply it with data and to ensure that the instance data is saved to the Aspect directory ILA EES Enter search name Z No Fiter WE Ree O A TS Control Structure M Desc Inherited Category name a Asset Monitoring Server Asset Monitoring Server Control Connection 09 16 2003 11 2 Holds False OPC Control Co P Root Domain 3 Control Structure 09 16 2003 11 2 Con False Control Structure EEE Control Network Control Network CA Declarations ATEX FP ATEX FP O 04 10 2003 7 25 Decla True Declarations W E J Project Control Project QA Declarations ATEX 15 ATEX I5 O0 04 10 2003 Deda True Declarations W B Applications Application Group QA Declarations FMFP 2600T_FM_e 04 10 2003 7 25 Decla True Declarations W E Controllers Controller Group A Declarations FMIS 2600T_FM e 04 10 2003 7 25 Deda True Declarations W E E Controller_1 AC 800m A Declarations of Conformity CEP 04 10 2003 7 24 Decla True Declarations W Y Access Variables Access Variables 8 Device Management 09 17 2003 8 36 Provi Fals
39. Relevant Documentation on page 13 Integration of new PROFIBUS Device Object Types The PROFIBUS Device Integration Library covers a basic set of object types for different PROFIBUS devices This Device Integration Library can be enhanced with additional object types downloadable via ABB Solutionsbank By using the Device Library Wizard new device object can be imported to the 800xA system A Further information on the Device Library Wizard and single device object types can be found in Section 5 Device Library Wizard optional 3BDD011750R4101 91 Pre configured Aspects in the Object Type Structure Section 4 PROFIBUS Device Integration Pre configured Aspects in the Object Type Structure 92 The object type structure contains the device objects to be used in the projects PROFIBUS device object types are integrated in the 800xA system by installing the PROFIBUS Device Integration as well as by loading the PROFIBUS Device Integration system extensions Additional device object types will be loaded to the system via Device Library Wizard Depending on the system license features can be used without additional configuration work The following aspects are attached to each PROFIBUS device object type e Name Name of the device object type Install lt DTM gt optional Reference to the installation program of a device specific DTM for which a manufacturer s license must be held at the time of installation The use of this aspe
40. T The Fieldbus Builder PROFIBUS HART supports the following functions in the hardware topology of the Plant Explorer Control Structure e Selecting a device object starts the corresponding DTM e The DTM is supplied with instance data from the 800xA system database e Saving of the current DTM instance data e Management of the fieldbus topology structure up to the HART field devices e Configuration and removal of the communication paths for online communication between the DTM and the physical field device in the system e Provision of DTM internal instance data for bulk data applications if supported by the DTM e Support of 800xA System Audit Trail interface The information following this section provides a general description of the Fieldbus Builder PROFIBUS HART Some descriptions about Fieldbus Builder Aspects are only required if you wish to develop your own object types ABB cannot guarantee an operable 800xA system if device object types are created used manually Only tested software DTMs may be installed on the system computer All software supplied in the Device Integration meets this requirement Additional information about the device library and the integration of new device objects can be found in Section 4 PROFIBUS Device Integration Library 58 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART FDT 1 2 User Roles in the 800xA System FDT 1 2 User Roles in the 800xA System Every System user has a user ro
41. appear with various functional windows The various modes are selected via the Fieldbus Management aspect of the relevant device object Communication enabled mode starts all DTMs required for the communication A sequence Individual DTMs in this connection sequence can then not switch to Communication disabled mode without affecting other DTMs started in this sequence Setting this object to Communication disabled enabled mode is described in Instancing of PROFIBUS Device Objects on page 47 in this document The following operations must be carried out to open the field devices DTM 1 Select the field device object in the Control Structure 2 Two possibilities are available to open a DTM Select the Device Management aspect in the aspect window Click at the device object in the Control Structure with the right mouse button to open the context menu Select Device Functions in the context menu 3 The DTM appears in the main window of the Plant Explorer by using the Device Management Aspect or in its own window by using the Device Functions context menu 4 Other DTM views can be activated via the menu bar of the Device Management window DTM specific or via Device Functions context menu 84 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART C1854 Web Server C1854 Web Server The CI854 CI854A PROFIBUS interface provides some extra functionality via a Web Interface This functionality is mainly used for
42. applied to intrinsically safe applications The PROFIBUS Device Integration consists of a set of software components for the efficient planning commissioning and servicing of PROFIBUS field devices within ABB s Industrial IT 800xA system 3BDD011750R4101 15 16 Section 1 Introduction The main components are e Fieldbus Builder PROFIBUS HART e PROFIBUS Device Integration Library e Device Library Wizard optional must be downloaded from the ABB Solutionsbank The PROFIBUS Device Integration installs the necessary software components as well as preconfigured object types using appropriate system extensions This means that for new device objects the functions of the installed components of this product are immediately available The object types in the Device Integration Package are created by ABB and tested for use in the 800xA system ABB created these object types based on data provided by individual device vendors e g GSDs Device specific DTMs and Asset Monitor behavior specifications which ABB relies on as accurately reflecting the actual device specification and behavior Therefore ABB cannot assume liability for events that are caused by devices that are not functioning according to fieldbus standards or device specifications or for events that are caused by mismatches between the device behavior and the input data provided by the device vendor 3BDD011750R4101 Section 1 Introduction Notes for use Notes for u
43. are environment for this tool The system requirements are described in the Industrial IT 800xA System Installation document 3BDD011750R4101 101 How to use the Device Library Wizard Prerequisites Section 5 Device Library Wizard optional The following requirements must be met to allow adding device object types to the device libraries of an 800xA system using the Device Library Wizard An 800xA system has been created and started All required 800xA licenses are loaded to the License Server The PROFIBUS Device Integration system extensions have been added The required system extensions are described in Prerequisites and Requirements on page 23 The Device Library Wizard has been installed on every 800xA system node The user has Windows administrator privileges How to use the Device Library Wizard Pre integrated device types for the Industrial IT 800xA environment are available from ABB Solutionsbank for all supported fieldbus protocols in the form of device object types This section describes the process of adding these device object types to an Industrial IT 800xA system using the Device Library Wizard tool 102 Adding device object types to the system requires to carry out the following steps Step 1 Download device Library Wizard from ABB Solutionsbank Step 2 Download designated device object types zip archives from ABB Solutionsbank Step 3 Extract and install the Device Library Wizard tool Step
44. ation mode with the field devices 74 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Management A The selected mode applies to the entire fieldbus line as far as the master nodes A Changing from Communication enabled to disabled mode may take some time if communication with field devices is still active The disconnection of the data path is indicated by a progress bar in the status bar If the tree is active in Communication enabled mode the user may not modify the D fieldbus topology This means that no new devices can be integrated into the active topology and no address modifications can be made directly on the object 3BDD011750R4101 75 Fieldbus Management Channel object Section 3 Fieldbus Builder PROFIBUS HART Channel object mode enables the user to display lower level fieldbus structures quickly and to select device objects on the same layout level Selected device objects are processed via the operational routine of the Fieldbus Builder PROFIBUS HART i e the DTM parameter set is loaded from the device to the instance data set or written from the data set to the device upload download as long as the DTM supports this function Channel objects are identified by an icon representing two arrows pointing in opposite directions Context menu Field Function Expand Expands the topology tree below the channel object node Expand Select Line Select Line This function can be
45. ayed 3BDD011750R4101 Section 2 Getting Started Open DTM via Device Management Aspect Open DTM via Device Management Aspect The following operations must be carried out to open the field devices DTM via Device Management aspect Open Plant Explorer workplace Switch to the Control Structure Open the substructure below the project object Select the field device object in the Control Structure Select the Device Management aspect in the aspect window Oe SO ee a The DTM appears in the main window of the Plant Explorer if it is selected via the Device Management Aspect or in its own window if it is selected via the Device Functions context menu A Double clicking on an Aspect in the Aspect window will open up its contents in a separate process window 7 Other DTM views can be activated via the menu bar of the Device Management window Gal Te con illieer soem rr ird Sirti T Asset Montorra Server Asset Mentoring Server E syan siwa and Everts Syston i K Tasks Control Task Group Function 1 Q lor androna Description H ORC Servers Srsters Alam ond Evert Group Number of channels Syd sarge l i ala Figure 26 Preview window with DTM and context menu vie Device Management 3BDD011750R4101 55 Open DTM via context menu in the Control Structure Section 2 Getting Started Open DTM via context menu in the Control Structure The following operations must be carried out to open the fi
46. cnscveueeyaudus cou cesbedacaueg iaten seeds sdnesteeseais 21 Prerequisites and Requirements cecceescceseesesceeececseeceeeeeseeeeaeesseeceaeessaeeeeeesaeeeeeenees 22 Int nd d W S60 soinnin Ea Na EAEE iensibestasxens EE R a 22 Product SUPPOTt orsi e ree E oA E T T EAR E AOR ANN 22 Section 2 Getting Started ON E E A A E E E E 23 Prerequisites and Requirements s sssesesesesseesertsrrrereresrerrsrerstrsrstrstsrrsrenresrarestnsrerrsreet 23 Fieldbus topology in the 800xA system ssessseesesessresssrsrssrerrsresreresreresresesresreses 24 3BDD011750R4101 Table of Contents Preparing device object types for usage oe eee ceseeseceeeeseeececeeseeeeseeeaeeaeeeaeeeeeaeeaeees 26 Installation of Device Type Manager DTM ecceeseeseeeeeeeeneeeneeceaeeeaeeeeaeees 27 Preparing Hardware Definition files hwd for Control Builder M 29 Update Hardware Definition eee eee eeeceeeeeeesseseeetaeeeeeeseeeeees 29 Update PROFIBUS Device HWD File eee ee eeeeeeereeeeneeeees 31 System 800xA Server Path Settings 0 ee ceeeeeeesceseeecesceeeeeessesesetaeseeseaeeeees 33 Pre commissioning Control Networks AC 800M and OPC 00 elec ere eereeeeeeeees 36 Creating an AC 800M Controller eee ec ceeeeesecececeeceeeeaeseaesseeeeeeseeeneeseees 36 AC 800M ORG Server suspiron pe senses danas ibescepesbansedessets 38 Pre configuration of the AC 800M controller cee eeeeseeeeeseeneeeneeseeeeeeneeeaes 39 Setting up a PROFIBUS
47. ct 3BDD011750R4101 53 Starting the Device Type Manager DTM Section 2 Getting Started Starting the Device Type Manager DTM 54 In addition to the Fieldbus Management aspect every field device features a Device Management aspect The Device Management aspect opens the associated DTM Device Definition in the main window with the instance data record DTMs can be started in Communication disabled mode to configure field device objects or if changes are to be made directly in the device in Communication enabled mode Depending on the mode the DTM will appear with various functional windows The various modes are selected via the Fieldbus Management aspect of the relevant device object Communication enabled mode starts all DTMs required for the communication sequence Individual DTMs in this connection sequence can not switch to Communication disabled mode without affecting other DTMs started in this sequence Setting objects to Communication disabled enabled mode is described in Instancing of PROFIBUS Device Objects on page 47 Two possibilities are available to open a DTM e Via Device Management aspect in the aspect window Via Device Functions context menu in the Control Structure of the Plant Explorer workplace Certain device specific DTMs can only be started via the Device Functions context menu With these DTMs the Device Management window has a gray background and does not allow graphic interfaces to be displ
48. ct 5 Click Create 6 Select the newly created Control Network object and right click on the mouse 7 Select New Object in the context menu 3BDD011750R4101 37 Creating an AC 800M Controller Section 2 Getting Started 8 Select the required controller type for example AC 800M controller and enter a project name in the Name box x Common Product Type Structure l pObject description 4C800M_Safety Additional Arguments EmptyProject SoftController ae Icon Name Project1 IT Show all IV List presentation Advanced Set GUID Cancel Help Figure 15 Selecting the AC 800M controller 9 Click Create You have now created the Control Network with an AC 800M Controller Several AC 800M Controllers can be created under one Control Network Repeat steps 6 to 9 as required to do this To create a new Control Network and AC 800M Controller repeat steps 1 to 9 Further information on the Control Network and Controller can be found in the relevant product documentation AC 800M OPC Server Parameter display and faceplates are mainly supplied with data via the AC 800M OPC Server Information about configuring and starting the AC 800M OPC Server can be found in the relevant product documentation 38 3BDD011750R4101 Section 2 Getting Started Pre configuration of the AC 800M controller Pre configuration of the AC 800M controller To ensure e
49. ct is described in Installation of Device Type Manager DTM on page 27 Product Documentation Access to various device specific documentation For accessing a single document please refer to Accessing device specific documentation on page 93 e PROFIBUS lt channel generic specific gt Asset Monitor Asset Monitor acquire and analyze asset status and condition information They notify operators and maintenance personnel when an abnormal condition calls for maintenance action DIP CMMS Object Type Extension Definition This aspect handles the CMMS aspects during instantiation e DIP Maximo Object Type Extension Definition This aspect handles the Maximo CMMS aspects during instantiation The aspects described here are configured for the device object types supplied with the device library and do not need any other settings Unless indicated otherwise this aspect is designed to be used for developing new object types which may only be implemented in an 800xA system once they have been approved by ABB 3BDD011750R4101 Section 4 PROFIBUS Device Integration Library Accessing device specific documentation Device instances and variants Accessing device specific documentation For accessing device specific documentation the following steps are necessary 1 Select the Product Documentation aspect of the device instance i Astat MERONEN Asset MORONG Cortral Network Control Network gt 5 Project Control Project E akane
50. d Device 78 Upload Selection 78 User Roles 59 Verify Device 77 DTM Data Set 51 Selection 77 View Active Work Order 99 Equipment Status 99 Preventive Maintenance Schedule 99 Spare Parts 99 Work Order History 99 Ww Web Interface 85 Web Server 47 Z Zip Archives 102 3BDD011750R4101 AA ED ED FADED 3BDD011750R4101_ Printed in Sweden May 2005 Copyright 2003 2005 by ABB All Rights Reserved Registered Trademark of ABB Trademark of ABB http www abb com control Automation Technology Products Automation Technology Products Wickliffe Ohio USA Vasteras Sweden www abb com processautomation www abb com processautomation email industrialitsolutions us abb com email processautomation se abb com Automation Technology Products Mannheim Germany www abb de processautomation email marketing control products de abb com
51. dware Type a ABB Drive template extension Hardware Type ABB Engineered Drive Hardware Type ABB Standard Drive Hardware Type AMS ABB_263 265_Al_Long Hardware Type AY ABB _263 265_Al_Short Hardware Type H ABB _263 265_Empty Module Hardware Type ft PO_v1_0 Hardware Type AME ABB _267 269_Al_Long Hardware Type AME ABB _267 269_AI_Short Hardware Type AE ABB _267 269_Empty_Module Hardware Type AME ABB _267 269_MF VF Hardware Type AME ABB 267 269_MF Hardware Type AME ABB _267 269_OUT_PID RCAS_IN IN_PID Hardy AME ABB _267 269_OUT_PID RCAS_IN Hardware Typ ABE ABB _267 269_OUT_PID Hardware Type ARE ABB 267 269_VF Hardware Type AM ABB 267 269_YPO_v1_0 Hardware Type AME ABB TZIDC_110 210_RIN ROUT CB Hardware 1 110 210_RIN ROUT Hardware Type Hardware Base Super Type Refer 5 10 2004 1 58 5 False Hardware Base Hardware Type Type Reference 5 10 2004 1 58 False Hardware Type Hardware Unit 5 31 2004 2 Cont False Hardware Unit BEinstal toz600 PA DTM 6 1 2004 3 5 False Windows Applic Name 5 10 2004 1 The False Name E object Icon 5 31 2004 2 Obje False Object Icon amp Object Type Structure 5 10 2004 1 Obj False Object Type Str Product Documentation 5 10 2004 3 False DIPInstAsp Property Translations Extended 5 31 2004 2 29 5 Youc False Property Transl PB update Hardware Definition 6 19 2004 4 35 2 False Windows Applic A ABB_263 265_YPO_v1_0 Update Har z S
52. e Asset Monitoring e Computerized Maintenance Management Systems CMMS Connectivity e Configuration Parameterization Operation via DTM Product Documentation Product Documentation is directly available at the device object Key product data are bundled in convenient electronic format Thereby documents like Data Sheet Installation Configuration and Operation Manual as well as maintenance and service manual are accessible via mouse click 3BDD011750R4101 Section 1 Introduction Components and Functions Asset Monitoring Asset Monitor Asset Reporter and Asset Viewer acquire and analyze asset status and condition information They notify operators and maintenance personnel when an abnormal condition calls for maintenance action Maintenance Management CMMS Connectivity provides the seamless integration of the Computerized Maintenance Management Systems CMMS into the Industrial IT system environment Asset related maintenance information is accessed via standard preconfigured CMMS views allowing for the quick and efficient assessment of maintenance needs and status Device Type Manager DTMs are the configuration and management software component for a field device It is familiar with all of the device s rules to ensure the correctness of the device configuration The DTM contains graphical user dialogs essential for device configuration parameterization diagnostics and maintenance and enables offline engineering w
53. e Device Manage E Applications Application References SS Fieldbus Management 09 16 2003 11 2 Mana False Fieldbus Manag Hardware Control Hardware Group BB install 264xx DTM 09 04 2003 8 56 True Windows Applic 0 PMB60 TP830 oa pen ALOIA be ina a abelian bam 1 Ethernet O Be PA101 Device Management ASS A a 2 Ethernet 3 Com Device Config View 4 Com Company 1D ie Ea E 11 ModuleBus z Online Parameterize g g 1 AI895 Device Type Device ID 138 4 1581292 Q PA101 264A5_HART Final Assembly No i EQ 2 A0895 Diagnosis 9 V1201 TZID_HART lies LongiT g Tmo i ere 5 0 1 cas r Transducer Parameter Exchange a0 a ae Units for Limits and Span mbar About DTM a 2 A0895 Lower Upper Limit ee ee Eemal 1 System Alarms and Events System Alarm and Event Group Minimum Span E 8 49 Tasks Control Task Group Lost And Found Serial Number 114202 H OPC Servers System Alarm and Event Group ase Nes Software Hardware 22 2 Bell 202 Current fro cammara Device Universal Commands 2 5 g HART ce 8 Markus Schade Planning Engineer AI Figure 38 Device Definition aspect with open DTM 3BDD011750R4101 83 Device Management Section 3 Fieldbus Builder PROFIBUS HART DTMs can be started in Communication disabled mode to configure field device objects or if changes are to be made directly in the device in Communication enabled mode Depending on the mode the DTM will
54. eld devices DTM via context menu in the Control Structure Open Plant Explorer workplace Switch to the Control Structure Open the substructure below the project object Select the field device object in the Control Structure Click with the right mouse button to open the context menu ON te ee Re Select Device Functions in the context menu BLEDADT System Plant Explorer Workplace Oal Erte search nse tio Fee S15 feie Alo 4 AA ell Ty covered structs vjana Metheg T a Post omen AEB _262_264_V1_ Type Reference 7 20 2004 10 17 False AEB _262_264 nf asat Menten asat Monkorng Eilain Lat 15 2008 12 5 Mis True Alerm ond Even oniro Network Control Network J aon epeeton afifa S415 Thee Kaka hanat Repcetne f Ey Asset viereer HAJI 10 87 Falso Asset Veer 9 AssetMonitorProperties 220 2006 10017 The Falso Asset Montor a Controls Controler Group DEENA Ee Ths True Alarm and Even BB Controter_1 AC 000M SS OAE Hats False OPC Cerir Co F Aem Variaties Ace New Obit 22012008 10 17 Con Fake Cortrel Srcture E BB Arckcations appicatu New A pects HURA NAS Provan False Device Manage H rwo Control nan Unbert Object LIS2009 12 5 This True Alarm and Even O o ma Treo Set temporary root 1 ihent on Da_Proveader LEDACONZ Servior ty 5S Be Ceoy Wnts Centiguration sratus Paste peoa Delete Show Type 12 Creste Faut Report Ti l3 Refresh Tree Nodes Tos
55. es The name of the master object type are described in the product release notes Select the Install lt DTM gt Aspect if applicable Double click on the Install lt DTM gt Aspect to start the associated installation program Follow the instruction of the DTM setup program Steps 1 to 6 need to be carried out on every 800xA system node on which the PROFIBUS Device Integration has been installed Further information about device object types can be found in Section 4 PROFIBUS Device Integration Library 3BDD011750R4101 Section 2 Getting Started Preparing Hardware Definition files hwd for Control Builder M Preparing Hardware Definition files hwd for Control Builder M Hardware Definition files are needed in the Control Builder M project to establish the communication between AC 800M controller and the certain PROFIBUS devices The Hardware Definition files hwd are based on the specific GSD file of the PROFIBUS devices and contains basic communication parameter as well as user specific parameter and diagnosis for the cyclic communication Hardware Definition files for PROFIBUS devices are part of the PROFIBUS Device Integration Library Please see Section 4 PROFIBUS Device Integration Library for detailed information The hwd file is mandatory for object types which are used in the field device topology In case that the hwd file is already integrated in the Control Builder M project this subsection is not applicable
56. es 1201 TZID_HART DA i B 20 C1840 1 A1895 f 2 aoses W System Alarms and Events System Alarm and Event Group 4B Tasks Control Task Group Lost And Found PC Servers System Alarm and Event Group a J Aspects of o Asset Reporter This False Asset Reporter Asset Viewer False Asset Viewer Control Builder Name 09 16 2003 10 The False Control Builder E control Properties 09 17 2003 8 Cont False Control Properties amp Control Structure 09 16 2003 10 Con False Control Structure E Hardware Unit 09 16 2003 10 Cont False Hardware Unit lame 09 16 2003 10 The False Name E object Icon 09 03 2003 11 Obje True Object Icon PM860 TP830 Type Reference 09 16 2003 10 False Pms60 TP830 Property Translations Extended 09 03 2003 11 0 Prop True Property Transl O gt Jo controt Properties 1 gt Be Properties about Properties EXTUNDECLAREDEVENTSEVERI LOWLEVELEVENTBUFFERSIZE ER Property Value Enabled e A Update value from reference MAXNOOFENROLLMENTS MAXNOOFEVENTQUEUES MAXNOOFNAMEDVALUEITEMS MAXPERCOFLOGSTRINGS Name NUMOWNAREAS NUMREMOTEAREAS ROUTINGTYPE SENDPERIOD SNTPSERVERADDA1 SNTPSERVERADDR2 SYSTEMAECLASS SYSTEMAECRITICALSEVERITY SYSTEMAEFATALSEVERITY SYSTEMAEHIGHSEVERITY SYSTEMAELOWSEVERITY SYSTEMAEMEDIUMSEVERITY SYSTEMEVENTSTOSESSIONLOG TOOLROUTINGNBRCON Gre Help Figure 16 T
57. et the actual loaded configuration data lave I O Jse this service to read the input and output data for a specific slave unit ane gs irmwareInfo se this service to display the actual firmware information of CI854 CI854A HardwareInfo Use this service to display the actual hardware information of CI854 CI854A Red Switchover Use this service to perform a redundancy switch over of a connected PROFIBUS slave device 87 C1854 Web Server 88 Section 3 Fieldbus Builder PROFIBUS HART ErrorMemory This information is of relevance only for the ABB service engineer in case of an error Debug This information is of relevance only for the ABB service engineer in case of an error Additional navigation is possible in the 3rd and 4th window 3BDD011750R4101 Section 4 PROFIBUS Device Integration Library Overview The device libraries contain a portfolio of System 800xA tested and certified ABB and third party device objects minimizing the effort of integration for 800xA system users Each device is represented in the library by a device type object ABB s Device Integration Center DIC creates these objects for the user and enriches them with all aspects for efficient device management over the entire life cycle from the design phase to operation and maintenance To assure interoperability of the system with the device and the related components the new device type object is tested against the real device
58. evice Integration Library Connection to Asset Optimization Asset Optimization consists of system extensions that allow plant personnel to collect compare and monitor field device data in order to accurately assess equipment conditions Information can subsequently be used to set future performance and profitability goals and to assist managers in making these decisions The Optimize IT Asset Optimization software consists of the following components for which the Device Integration Library provides a connection for its preconfigured field device types Asset Monitoring 96 Asset Monitoring provides the infrastructure that monitors analyzes and reports asset status condition information It notifies operators and maintenance personnel when an abnormal condition calls for maintenance Asset Monitoring interacts with third party CMMS applications to optimize the use of plant equipment and processes An Asset Monitor is an application for retrieving data from and interacting with multiple data servers e g OPC Servers Asset Monitors can detect problems that may not affect the process variables but do affect the maintenance status of an asset or process A The ABB Asset Monitoring product must be installed and licensed 3BDD011750R4101 Section 4 PROFIBUS Device Integration Library Asset Monitoring Asset Monitoring library aspects The aspects listed in Table 8 are added to the field device types if the related software op
59. formity CE_P 04 10 2003 7 24 Decla False Declarations W Device Definition 08 30 2003 8 21 Devic False Device Definition WB install 264xx DTM 09 04 2008 8 True Windows Applic EA Installation Manual PED26XHNGA 04 10 2003 7 Insta False Installation Man QA Maintenance and Service Manual 04 10 2003 7 Instr False Maintenance an 3 Name 04 10 2003 6 The False Name E object Icon 08 09 2003 4 Obje True Object Icon l Object Type Structure 09 16 2003 10 4 Obj False Object Type Str hinah ni nnn ne saaan ali wre T 264a5_HaRT Device Definition 13S e DTM Data Exchange OPC Settings Overview f D0930 DTM p Selected Device Type Manager a Al830 DTM Vendo m 40920 DTM DPS10 DTM Name Basic HART DTMs Al820 0TM Version Date 003 H O 403910 DTM i _ 2 A0820 DTM FDT Version ic Al835 DTM 800 DTM Selected Device Type a 900 DP C Vendor Device Type Version Date Tuesday August 12 2003 Bus Protocols HART C Generic HART ABB TZIDxx G aoc Su ported Languages German Germany C ABB THO2 English United States X gt Figure 29 Device Definition aspect in the object type structure Once the Device Definition aspect has been selected a Fieldbus Builder PROFIBUS HART window will appear containing four tabs DTM Data Exchange OPC Settings Overview 64 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART 3BDD011750R4101
60. fter stopping the Device Management Server The Plant Explorer Workplace has to be closed to stop this server 65 Device Definition Section 3 Fieldbus Builder PROFIBUS HART Data exchange Address information for the field device is configured here and transferred to the DTM Some DTMs may use a format not specified in the FDT for transferring address information These may be DTMs which for example use proprietary protocols such as internal module bus protocols for remote I O This is an optional tab for address information for DTMs which do not support A the standard FDT format By default all fields in this version are empty DTM Data Exchange Jopc Settings Overview m Address Information Kind X Source Aspect Source Property X Destination Path gt Tag Source Aspect X Source Property I Controller Reference Details Figure 31 Data exchange settings 66 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART OPC Settings The user can use the OPC Settings tab for an additional assignment of an OPC DTM to a field device object in order to make device data available to higher level applications via OPC access For this purpose an OPC compatible DTM is selected from the proposed DTM list DTM Data Exchange OPC Settings overview FDT OPC Access JV OPC access 40920 DTM DPS10 DTM Al820 DTM 40310 DTM 40820 DTM Al835 DTM H A B E
61. he 800xA licensing It is recommended to know the device addresses of each PROFIBUS device located on the PROFIBUS line before starting the device instantiation If the devices are already connected to the PROFIBUS network download the created project first Then start the PROFIBUS CI854 Web Server to get the live list of connected PROFIBUS devices The Web Server is described in CI854 Web Server on page 85 and in the related C1854 product documentation Industrial IT 800xA Control and I O PROFIBUS DP Engineering and Configuration 3BDS009030 Plant Explorers Control Structure ON SI ogee SOs hoe Open Plant Explorer workplace Switch to the Control Structure Open the substructure below the Project object To place a PROFIBUS device on the CI854 select the CI854 Hardware object Right click on the mouse and select New Object in the context menu Browse to the required PROFIBUS master object in the AC 800M hardware catalog e g ABB_TFx12_YPO_v1_0 3BDD011750R4101 47 48 Instancing of PROFIBUS Device Objects Section 2 Getting Started 7 Enter the PROFIBUS address of the object placed e g 20 in the name box Click Create 9 To place a specific device module below the PROFIBUS master object select the PROFIBUS master object 10 Right click on the mouse and select New Object 11 Browse to the required device module in the AC 800M hardware catalog e g ABB_TFx12_Temp1 12 Enter the slot number of the module
62. he Courier font and user responses inputs appear in the Courier bold font For example if you enter a value out of range the following message appears Entered value is not valid The value must be 0 to 30 You may be told to enter the string TIC132 in a field The string is shown as follows in the procedure TIC132 Variables appear in lower case letters sequence name 3BDD011750R4101 About This Book Terminology Terminology The following is a list of terms associated with this product that you should be familiar with The list contains terms and abbreviations that are unique to ABB or have a usage or definition that is different from standard industry usage Term Acronym Description ACD Asset Condition Document Contains all information necessary to describe an asset condition Generated by the Asset Monitor Aspect Objects ABB technology for representing real world objects in data models containing all the necessary information for design engineering operation and maintenance Object data is grouped into aspects each representing certain characteristics of an object There are several ways of presenting aspect object data Aspect Object Type Defines certain characteristics that are shared between several object instances such as a basic set of common aspects This makes it possible to create and efficiently re use standardized solutions to frequently recurring problems For example rather than building
63. he DTM The used device module must be configured also in DTM if applicable Once the PROFIBUS Device Objects have been instanced and downloaded they can be configured for the application via DTM A configuration describes the creation of a parameter set for a particular device in the database only in the Aspect Server To do this the Fieldbus Management must be switched to Communication disabled mode see Instancing of PROFIBUS Device Objects on page 47 A detailed description of how to start the relevant DTM is given in Starting the Device Type Manager DTM on page 54 The configuration of the device via a DTM is described in the associated DTM documentation and is not included in this documentation Once the configuration phase is complete for all PROFIBUS Device Objects the data records for the relevant device or selection of devices can be e verified loaded to the device selection of devices e sayed in one or more export file s These functions are executed via the Fieldbus Management Aspect and its subconditions Instance data can be verified and exported with the Fieldbus Management in Communication disabled mode but loading is only possible in Communication enabled mode In order to load fieldbus lines select the line via the context menu of the Fieldbus Management and then click on Download selection to start 3BDD011750R4101 Section 2 Getting Started Configuration and Commissioning of PROFIBUS Device Objects
64. i e only the last current status is ever displayed A The current status overwrites the previous status with new parameters Parameters may therefore toggle in the window Table 5 Object information window functions Field Functions Status The current status of the bulk process is displayed If several messages are pending only the message with the highest priority is displayed Prio 1 Error Prio 2 Message Prio 3 Information Object Object name Tag Device internal tag name Read from the device Address The module or bus address Description Indicates whether the object is a module a channel or a DTM Type Indicates the DTM type read from the DTM Vendor Indicates the DTM vendor eu aaa a Figure 36 Object information window 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Management Message window The message window indicates the current status of actions executed which were defined in the fieldbus tree Time Object Message P 09 16 2003 4 21 17 1 41895 Data set valid P 09 16 2003 4 21 17 PA101 2644S Data set valid P 09 16 2003 4 21 32 1 41895 Object export C DOCUME 1 MARKUS 1 LOCALS 1 1 09 16 2003 4 27 08 PAI01 2644S Upload started eo 09 16 2003 4 27 14 PA101 2644S Upload cancelled x 09 16 2003 4 27 15 PA101 Abort x 09 16 2003 4 27 15 PA101 Upload aborted Figure 37 Message window Table 6 Message
65. ick with the right mouse button to open the context menu Select Synchronize DTM related path It is recommended to start DTM data synchronization to the end of configuration O work to keep network utilization small 52 3BDD011750R4101 Section 2 Getting Started Deleting Device Objects Deleting Device Objects Deleting device objects can only be made in Communication disabled mode The following operations must be carried out to delete the field device from the Control Structure PROFIBUS device objects can be also deleted from the Control Builder M tool A Open the Control Builder M project select the specific device object and click the right mouse button Device module can be deleted exchanged or moved to another PROFIBUS address Open Plant Explorer workplace Switch to the Control Structure Open the substructure below the project object ee Select the field device to be deleted in the Control Structure of the Plant Explorer m Click with the right mouse button to open the context menu Select Delete in the context menu E se 11 ModuleBus a g 1 arses E 2 40895 Default Aspect 1 C1854 amp 20 c1s40 1 AI895 2 A0895 System Alarms and Events System A New Object New Aspect Insert Object Join Object Tasks Control Task Group Change Type Set temporary root stem Alarm and Event Group Cut Copy Paste Paste special ld Delete Figure 25 Delete device obje
66. ion Manual 10 15 2003 11 41 Install False Installation Man OPC Servers System Alarm and Event Group Name 10 15 2003 11 33 Theb False Name l Object Type Structure 10 15 2003 11 33 Obje False Object Type Str Object Type Type Reference 10 15 2003 11 38 False Object Type ES Product Classification 10 15 2003 11 33 MAN False Product Classific I Product Data Sheet 10 15 2003 11 41 Produ False Data Sheet We ES Product Identification 10 15 2003 11 33 MAN False Product Identific ES Product Properties 10 15 2003 11 38 Tech False Product Ratings TF212 Reference 10 15 2003 11 33 TF212 False Tr212 TF212_PA Type Definition 10 15 2003 11 39 Fale Object Type Def RA Version Matrix 10 15 2003 11 41 Instu False Operating Manu 2 AfwWorkplaceApplication Module Figure 44 Selecting device specific document 94 3BDD011750R4101 Section 4 PROFIBUS Device Integration Library Accessing device specific documentation Further System and Device Documentation Further documentation about Device Integration and devices e g network components can be found at e Start Menu Start gt Programs gt ABB Industrial IT 800xA gt System gt Documentation DevMgmt PROFIBUS DevMgmt HART Control Asset Optimization IIT800xA System Figure 45 800xA Documentation 3BDD011750R4101 95 Connection to Asset Optimization Section 4 PROFIBUS D
67. ithout requiring the connected field devices In addition online engineering with connected field devices is also possible During setup of the PROFIBUS Device Integration Library the following DTMs are installed e Basic PROFIBUS DTM As it uses device specific templates the Basic PROFIBUS DTM also enables custom access to the corresponding device S800 T O DTM Used for the configuration and diagnosis of HART devices which are connected to a S800 module 900 I O DTM Used for the configuration and diagnosis of HART devices which are connected to a S900 module 3BDD011750R4101 19 Device Library Wizard and Device Object Types optional Section 1 Introduction e Device specific DTMs Additional DTMs are prepared for installation from the hard disk which can be installed directly from the Device Integration setup program or later on via Install DTM Aspect directly at the object type A Please read the PROFIBUS Device Integration Release Notes for detailed information about limits and additional licenses may be required for some DTMs Device Library Wizard and Device Object Types optional For easy integration of devices into the Industrial IT 800xA environment ABB provides a continuously increasing set of pre integrated device types for PROFIBUS protocol in the form of device object types Pre integrated device types for the Industrial IT 800xA environment are available from ABB Solutionsbank for all supported fieldbus prot
68. l of the desired modules have been placed Hardware Definition File Integration 42 The Control Builder M needs to have converted GSD files to establish cyclic communication between CI854 and the related field device The converted GSD file which is stored in a Hardware Definition file hwd can be inserted in the Control Builder M project All device object types in the PROFIBUS Device Integration Library as well as device object types included to the library via Device library Wizard does contain a valid Hardware Definition file The hwd file has to be copied manually to the Control Builder M directory via specific aspect at the device object type Please follow the procedure described in Preparing Hardware Definition files hwd for Control Builder M on page 29 before perform the steps below 3BDD011750R4101 Section 2 Getting Started Hardware Definition File Integration 1 Open Control Builder M as described below Open Plant Explorer workplace Switch to the Control Structure Browse to the Control Project object Select the Control Project Object Right click on the mouse and select Open Project 2 Switch to the Control Builder M project window 3 Select File gt Insert Hardware Definitions S Control Builder M Professional Projecti File Edit View Tools Window Help New E Open Project Ctrl O Refresh Project Print Ctrl P Documentation Exit B Connected Ap
69. laced below the AC 800M controller E Control Structure E Rost Domain ff Asset Monitoring Asset Monitoring Control Network Control Network B my Project1 Control Project B Applications Application Group E J Controllers Controller Group E M Controller_1 Ac 800M sy Access Variables Access Variables E B Applications Application References fj Hardware Control Hardware Group J 0 pmaes TP830 Figure 17 Control Structure with AC 800M 3BDD011750R4101 41 Hardware Definition File Integration Section 2 Getting Started Select the Hardware object Right click on the mouse and select New Object Browse to the C1854 object stored in the AC 800M hardware catalog Oe oy Enter the CEX bus number of the module placed e g 7 in the name box The CEX bus is the internal communication bus for data transmission between AC 800M controller and the connected communication interfaces The communication interfaces are located on the left side of the controller and are numbered from left to right Starting number is One Example If the CI854 module is the second module on this bus the number 2 must entered in the name box Information relating to CI854 modules and instancing instructions can be found in the relevant product documentation 9 Click Create The module is instanced both on the slot number in the Plant Explorers Control Structure and in the Control Builder M project Repeat steps 5 to 8 until al
70. lder works exclusively in conjunction with this structure Fieldbus Management This aspect is used to open the graphical user interface of the Fieldbus Builder PROFIBUS HART in the window Fieldbus Management is to be used e To assign HART field devices to input output module channels with HART functionality e To manage the Communication disabled and Communication enabled operating modes e To read and load the field device data of objects by means of their DTMs e To configure the OPC Server PROFIBUS HART e To import and export DTM device instance data 70 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Management Selecting the Fieldbus Management aspect opens the Fieldbus Builder user interface in the main window of the Plant Explorer ponpe RT TOA 2 Aspects oF Modified Des ES Control Structure g Asset Monitoring Server Asset Monitoring Server A1895 Type Reference 09 16 2003 10 5 False A1895 Root Domain Asset Reporter 09 16 2003 10 5 This False Asset Reporter EEE Control Network Control Network Asset Viewer 09 16 2003 10 5 False Asset Viewer EBB Project Control Project Control Builder Name 09 16 2003 10 5 The False Control Builder Applications Application Group E control Properties 09 16 2003 10 5 Cont False Control Properties S H Controllers Controller Group amp l Control Structure 09 16 2003 11 2 Con False Control Str
71. le which is set by the system administration in the configuration wizard of the 800xA system This information is stored in the Plant Explorer under User Structure The following user roles are available e Application Engineer e Everyone e Operator e Software Developer e System Engineer These system user roles are converted to user roles conforming to FDT 1 2 in accordance with the following table and are transferred to the DTM when it is called Table 2 Managing user roles System user role FDT 1 2 user role D amp Q 5 D o si se a e 7 a 2 z s g c E D D LW amp Q Q O lt A O O Software Developer X X X System Engineer X X xX Application Engineer X X Operator X Everyone X In accordance with FDT 1 2 the DTM decides which functions are activated by o which user role 3BDD011750R4101 59 Fieldbus Builder PROFIBUS HART Aspects Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Builder PROFIBUS HART Aspects Aspect Overview Once the Fieldbus Builder PROFIBUS HART has been installed it is available as a new aspect system The aspect system adds the following aspects to the 800xA system Table 3 PROFIBUS HART Fieldbus Builder aspects Aspect Function Device Definition This aspect allows an installed DTM to be assigned to a specific object in the object type structure Device Management This aspect starts the DTM with its instance data
72. n the object type structure The object type structure contains the device objects to be used in the projects The individual device objects are described in the Section 4 PROFIBUS Device Integration Library Objects in the object type structure managed using the Fieldbus Builder PROFIBUS HART must have the following aspects e Device Definition This aspect assigns the DTM to the object e DIP Fieldbus Builder PH Extension Definition This aspect handles the Fieldbus Builder aspects during instantiation with the device library and do not need any other settings Unless indicated otherwise these aspects are designed to be used for developing new object types which may only be implemented in an 800xA system once they have been approved by ABB Please contact ABB Service The aspects described here are configured for the device object types supplied 3BDD011750R4101 63 Device Definition Device Definition The Device Definition aspect is used to assign the installed DTM to the specific device object in the object type structure 2 E enter search name I re Filter P Rece A 5 50 ests et aat Moed __ br All DTMs used should be installed for subsequent operations Third party manufacturer DTMs are not subject to ABB license conditions Additional information can be found in Section 4 PROFIBUS Device Integration Library Object Type Structure ka Ey Object Types 4 3 rd party OPC server support Object Type G
73. name No Fiter gt Repiace o E E Control structure x Aspects of 2 Modified D Inherited Category name _ 2l E Root Domain A Device Management 8 12 2004 2 Device Manage Tig Asset Monitoring Asset Monitoring S Fieldbus Management 8 11 2004 3 26 Fieldbus Manag 225 control Network Control Network E Hardware Unit 8 11 2004 Hardware Unit J Projectt Control Project 2 Name 8 11 2004 Name E E Applications Application Group E object tcon 7 14 2004 Object Icon J Controllers Controller Group Product Documentation 91342004 DiPInstAsp E Controller_1 ac 800M Property Management 8 11 2004 Property Mana SP Access Variables Access Varial property Translations Extended 7 14 2004 Property Transl E E Applications Application Refera _ TFx12 12MB PNOID 04C4 Type Re 8 11 2004 3 TFx12 12MB PN Gi Hardware Control Hardware GIE Upload Hardware Definition 10 12 2003 Windows Applic m o pmase TP830 0 1 cress IO gt ag Product Documentation JSS ad AME 2 TFX12 12MB PNOID ca At 3 ABB _PDP22_FBP_DP Documents I View Document if Select device Q 16 cies ag EE 18 5900 Aspects of TF212_ PA Modified Deser Inherted Category name f s em S AR 573 AC Aspect Categor Definition 10 15 2003 11 39 Theb False Aspect Category e Lost and Found RA Certificate Industrial IT 10 15 2003 11 41 Testr False Test Repott We BBE MUK Net 1 HART MUX Network oO Installat
74. nance management to the operator environment Context menus for process graphics the alarm and event list etc provide access to a number of views and actions for the specific CMMS item This allows plant personnel to collect compare and monitor field device data in order to accurately assess equipment conditions The Asset Optimizer and CMMS products must be installed Please refer to the Release Notes of this product listed in Relevant Documentation on page 13 and to the Asset Optimization documentation for detailed information of supported Computerized Maintenance Management System CMMS 3BDD011750R4101 Section 4 PROFIBUS Device Integration Library CMMS Connectivity CMMS library aspects The Device Integration Library provides a CMMS Connectivity aspect connection to the Computerized Maintenance Management System CMMS The aspects listed in Table 9 are added to the field device types Table 9 DIP CMMS Object Type Extension Definition Aspect Function Fault Report Submitter The Fault Report Submitter aspect makes it possible to submit Fault Reports to the CMMS systems View Active Work Order Lists all active work orders in the CMMS for a particular asset or group of assets View Equipment Status Allows data returned from a status assessment of an asset or group of assets to be viewed View Preventive Maintenance Schedule Lists the preventive maintenance schedule for an asset or g
75. nfiguration 3BDD011748 The document describes the basic features and how to configure the individual software components Industrial IT 800xA Device Management HART Release Notes 3BDS011768 This document contains the latest information about HART Device Management Industrial IT Release Notes 3BDS011767 800xA Device Management PROFIBUS This document contains the latest information about PROFIBUS Device Management Industrial IT The document describes how to use Device Library Wizard User Instructions __ the Device Library Wizard 3BDD011857 Industrial IT This document contains the latest Device Library Wizard Release Notes information about the Device Library 2PAA100110 Wizard 3BDD011750R4101 13 Relevant Documentation About This Book Title Description Industrial IT Fieldbus Basic HART DTM HART DTM Builder Configuration 3BDD011754 The document describes how to build device specific HART DTMs using the HART DTM Builder Industrial IT Fieldbus Basic PROFIBUS DTM PROFIBUS DTM Builder Configuration 3BDD011753 The document describes how to build device specific PROFIBUS DTMs using the PROFIBUS DTM Builder Control IT S800 I O DTM 3BSE027630 The document describes the features and how to configure the S800 DTM Industrial IT 800xA Engineering Engineering Workplace Basic Engineering Functions 3BDS011223 The document describe
76. nformation for upgrade procedure are described in the 800xA system upgrade manual The following steps need to be carried out for the relevant object type if the device specific DTM is not yet installed on the system node DTMs can be installed via setup tool located in Start gt All Programs gt ABB Industrial IT 800xA gt DevMgmt PROFIBUS gt PROFIBUS DTM Setup Tool or via the steps described below Switch to the Plant Explorers Object Type Structure A folder structure containing the various 800xA system object groups appears Click to open the folder structure Object Types gt Control System gt AC SOOM C Connect gt Controller Hardware Select the master device object used in the system 3BDD011750R4101 27 Installation of Device Type Manager DTM 28 4 5 6 Section 2 Getting Started For PROFIBUS object types are stored inside the Object Types gt Control System gt AC 800M C Connect gt Controller Hardware catalog This catalog level includes a master object type and the suitable module object types of the master object type The master object type contains device specific parameter for the cyclic communication documentation CMMS and Asset aspects Optional a Device Type Manager DTM is assigned to the master object type For instantiation of new device types in the Control Structure only the master object type shall be used Module object types can only be placed below master object typ
77. ngs aspect Root FBB PH Settings JS 9 By ge Value v Main View Description Readable Aspect_Server_1 C 4BB Industrial IT Data Engineer IT Fieldbus E Common access Pa Yes Aspect_Server_3 String 2nd alternative Acc Yes Aspect_Server_2 String 1st alternative acce Yes Connectivity_Server_1 String Share to Access Pa Yes Connectivity_Server_2 String Share to Access Pa Yes Coonectivty_Server_3 String Share to Access Pa Yes Figure 9 FBB PH Settings config menu 6 Select a server in the left side window Root FBB PH Settings 139 By gy Property Definitions E Coonectivty_Server_3 Name Aspect_Server_1 Add E Connectivity_Server_2 Description Common access Path for DTM _ E Connectivity_Server_1 Readable Yes Delete Permission Writable Yes Permission Administrate Data Type String Value C 4BB Industrial IT Data Engin Name Value Type Description Read RiPermission Write WiPermission Aspect_Server_1 CAABB Industr String Common acce Yes Yes Administrate Aspect_Server_3 String 2nd alternative Yes Yes Administrate Aspect_Server_2 String 1st alternative Yes Yes Administrate Connectivity_Server 1 String Share to Acce Yes Yes Administrate Connectivity_Server _2 String Share to Acce Yes Yes Administrate Coonectivty_Server_3 String Share to Acce Yes Yes Administrate paa f an arco Figure 10 Configuration Mode
78. nn ienen E EE EEE RENN 82 Device Managemen t ss ciccs siicccesitsessecstesteesvocsneiinassishssetees thet AE EEE A E 83 CI854 Web Serye sc ieeiszayssoneichdsadecds 2s sasbec E es is aaocts shea E peace 85 Pre configuration the Web Server ccs ee eeceeeeseeeseceeeeseeeeeeseeseeeaees 86 Web Server functionality 0 0 eee csesceseeseeeseceeeeeeeeeeeaeeenesseseeeeaees 87 Section 4 PROFIBUS Device Integration Library OOVEL VIC Wis ass eeicttess secrisoeks ws cise Gites c eegblags eden bleg aaeeds Cs Gea teieea wp cata th aad eos ae aseetdbeleeerteegale 89 F nctionality wis coses chavs okies vias cote cotng E E E cus A 91 Integration of new PROFIBUS Device Object Types 0 eee ee eeeeseeeeeeseeeeeeeeseeeeeeaeees 91 Pre configured Aspects in the Object Type Structure oe e ee eeeeseeeseeeeeneeeneeseeeaeees 92 Accessing device specific documentation 0 0 eee eseeseeeseeeeeeeeseeeeseeseeeaeeaees 93 Device instances and Variants ceeeeseeseeseceeeeseeeeeeseseneeseseeeeaeeneees 93 3BDD011750R4101 7 Table of Contents Connection to Asset Optimization 0 0 eee eceseeeeeseeeceeeeeeeeeaeseseeaesseeeaeeseeeseeseeeaeeaeeas 96 Asset MONItOTING cieie aein EER E NEE NA 96 Asset Monitoring library aspects sseessssesserssreresrsrrsreresreresresrsresreee 97 CMMS Connectivity i neiseis eain E EEE iNES 98 CMMS library aspect spinsero 99 Instantiation new devices using the PROFIBUS Device Integration Library 100 Section 5
79. nter search name T No Fiter z Repace al mis o i ES Control Structure z Aspects of 1 Modified f Ro oman S E E Control Properties ose False Control Properties gh Asset Monitoring Asset Monitoring al Control Structure con False Control Structure A Control Network Control Network 8 Device Management Provi False Device Manage 5 Project1 Control Project Fieldbus Management Mana False Fieldbus Manag H E Applications Application Group E Hardware Unit Cont False Hardware Unit E M Controllers Controller Group s3Name The False Name S M Controller _1 AC 800M E object Icon Obje True Object Icon SY Access Variables Access Variables Property Management Ford False Property Mana ERSEN Lost And Found r MUX Net 1 HART MUX Network es YP0004C2_v1_0 hwal J OPC Servers System Alarm and Event Group Dea H E Applications Application References Property Translations Extended Prop True Property Transl I Hardware Control Hardware Group Update Profibus Device HWD File 7 14 2004 8 56 3 False UpdateHWD E o Pme64 TP830 a 0 1 cies O gt Q iupdate Profibus Device HwD Fie 1 Ole AY 2 TFx12 12MB PNOID 04C4 ABB 0 TFx12 12MB T1 T2 Upload Hardware Definition File EA 3 ABB_PDP22_FBP_DP_v1_0 HR O ABB_PDP22_FBP_UMC2 EETA Ps ae 16 c1840 Select Device ABB _ 263 265 YPO_v1_0 Ej 18 5900 E System Alarms and Events Sys
80. oas E Windows Application YProfibusHwDImportPath UpdateHWD exe Program arguments Bro YP0004C2_v1_0 hwd Bro Figure 3 Update Hardware Definition aspect Double click the aspect Update Hardware Definition UpdateHWD xi Hardware Definition file YPO004C2_v1_0 hwd is copied to Hardware Definitions you can import the fie into Control Builder by File gt Import gt Hardware Definitions Note If you have already imported this file into your project please delete the file from project folder and restart Control Builder reopen project Figure 4 Upload message box Click OK The hwd file is now copied to the Control Builder M project directory Please go ahead with System 800xA Server Path Settings on page 33 Alternative the procedure described below can be performed to copy Hardware Definition files to the Control Builder M project 3BDD011750R4101 Section 2 Getting Started Preparing Hardware Definition files hwd for Control Builder M Update PROFIBUS Device HWD File The aspect Update PROFIBUS Device HWD File is only available in the Plant Explorers Control Structure at the PROFIBUS object type C1854 The following steps have to be carried out 1 2 3 4 Open Plant Explorer and switch to the Control Structure Browse to the PROFIBUS object C 854 Select the C7854 object Select the Update PROFIBUS Device HWD File aspect ALED4DT System Plant Explorer Workplace BEE g E E
81. ocols in the form of device object typs The Device Library Wizard is a tool that is used for adding these separately delivered device object types to the PROFIBUS Device Integration Library of an 800xA system It will be installed and operate on an Industrial IT 800xA system node A Please see Section 5 Device Library Wizard optional for detailed information 20 3BDD011750R4101 Section 1 Introduction New In This Release New In This Release Table 1 Versions Version Description 3 1 First version 3 1 SP1 Second version containing bug fixes and additional device object types 3 1 SP2 Third version containing bug fixes and additional device object types 4 0 800xA system version with new functionality DTM communication mode vie topology context menu Enhanced diagnosis messages e DTM Setup Tool allows easy DTM installation e Support of additional device types e Enhanced documentation Enhanced import export functionality of the Fieldbus Builder PROFIBUS HART 4 1 New system version containing bug fixes and additional device object types New functionality Support of the Device Library Wizard e Support of additional device types 3BDD011750R4101 21 Prerequisites and Requirements Section 1 Introduction Prerequisites and Requirements For prerequisites and requirements please refer to Industrial IT 800xA System Installation 3BSE034678
82. on disabled e Via context menu of the Fieldbus Management aspect at the device object Via Device Functions context menu in the Control Structure of the Plant Explorer workplace Communication mode via Fieldbus Management aspect 1 Select the C1854 object in the Plant Explorers Control Structure 2 Select the Fieldbus Management aspect in the Aspect window 3 The mode icon in the preview window indicates the current mode must be Communication disabled for fieldbus configuration The icon appears on the bottom left of the preview window Communication disabled 4 Ifthe mode is communication enabled select the Fieldbus Management node in the preview window Ta Control Structure gt Aspects of 1 Modified Desc Inherited Category name gt Asset Monitoring Server Asset Monitoring Server AIB9S Type Reference 09 26 2003 12 3 False A1895 8 Root Domain Asset Reporter 09 26 2003 12 3 This False Asset Reporter Control Network Control Network Asset Viewer 09 26 2003 12 3 False Asset Viewer 5 Project1 Control Project Control Builder Name 09 26 2003 12 3 The False Control Builder a B Applications Application Group EX control Properties 09 26 2003 12 3 Cont False Control Properties B B Application_1 Control Application Control Structure 09 26 2003 12 3 Con False Control Structure Control Modules Control Module Grl Device Management 0
83. ool Routing enabled for DTM access Increase TOOLROUTINGNBR CON to 50 if more than 50 devices are placed below a CI 854 PROFIBUS communication interface or if also HART device objects are used 40 3BDD011750R4101 Section 2 Getting Started Setting up a PROFIBUS Fieldbus Topology Setting up a PROFIBUS Fieldbus Topology Together with the AC 800M Controller and the CI854 communication interface the 800xA System is capable of setting up a PROFIBUS communication This section describes a sample set up for a PROFIBUS PA device The following steps have been performed in the Plant Explorers Control Structure PROFIBUS devices can also be instantiated via the Control Builder M Communication Interface C1854 The communication interface CI854 establishes the PROFIBUS network for an AC 800M controller Up to 12 CI854 can be placed at the Controller 6 lines can be build up in redundant mode Also line redundancy is supported from each CI854 interface A This section describes a simple PROFIBUS network configuration Mainly the configuration via Device Type Manager is part of this document Detailed information are described in the relevant product documentation of the Control Builder M Additionally there is a document describing how to build up a physical PROFIBUS network Open the Plant Explorer workplace Switch to the Control Structure Open the substructure below the Project object eS Browse to the Hardware object p
84. pecific instance data set to a file More information about this function can be found in the Backup Restore section Verify Device The DTM is called without GUI to verify the instance data record The result either OK or Error is logged in the message window as Data set valid invalid Verify Selection All selected device objects with their DTMs are called without GUI to verify the instance data record The result either OK or Error is logged in the message window as Data set valid invalid 3BDD011750R4101 77 Fieldbus Management Section 3 Fieldbus Builder PROFIBUS HART Context menu Field Function Upload Device This function calls the DTM without GUI reads the current data from the fieldbus device and uses this as the new instance data The function is only available in Communication enabled mode Upload This function calls the DTMs of the Selection selected objects without GUI reads the current data from the fieldbus devices and uses this as the new instance data The function is only available in Communication enabled mode Download This function calls the object DTM Device without GUI and downloads the instance data to the fieldbus device The function is only available in Communication enabled mode Download This function calls the selected object Selection DTMs without GUI and downloads the instance data to the fieldbus devices The
85. plications Figure 18 Insert Hardware Definitions 4 Move up one directory level Insert Hardware Definitions Look in O Projects Figure 19 CBM project path Projecti Up One Level 3BDD011750R4101 43 Hardware Definition File Integration Section 2 Getting Started 5 Open Hardware Definitions folder O Control Builder M Professional 4 0 l Hardware Definitions CI Projects CI Reports O ReportTemplates Figure 20 Hardware Definitions folder 6 Select hwd files multiple selection is possible jo Hardware Definitions x OQ 2 eE YPO004C2_v1_0 hwd E veooo4e4 hwd E vPo05101 hwd File name YP00062D_v1_0 hwd x Files of type hwd h Cancel Figure 21 Select Hardware Definition files 7 Click Open Hardware Definition files are inserted in the Control Builder M project A Hardware Definition files are only inserted into a single project If more AC 800M projects with PROFIBUS devices are used in the 800xA system steps 1 to 7 have to be repeated 44 3BDD011750R4101 Section 2 Getting Started Pre settings for Instantiation Pre settings for Instantiation Instantiation of field devices are only possible with the Fieldbus Builder PROFIBUS HART in Communication disabled mode If Communication enabled mode is active it must be deactivated for device instantiation Communication disabled Two possibilities are available to set the Fieldbus Builder in Communicati
86. roup f D ABB System Object Type Group f D Asset Monitors Object Type Group By Asset Optimization Object Type Group Control System Object Type Group 2 Field Devices Object Type Group Industrial Products Instrumentation Object Type Group 0 4 4 H Actuators amp Positioners Object Type Group 41 2 Analytical Products Object Type Group E Measurement Products Object Type Group Section 3 Fieldbus Builder PROFIBUS HART H E Flow Measurement Products Object Type E Pressure Measurement Products Object T Absolute Pressure Transmitters Object Gy 26445 Object Type Group T 26445_HART Object Type H 264NS Object Type Group H B 264VF Object Type Group 2 264VS Object Type Group E Differential Pressure Transmitters Obja 1 y Gauge Pressure Transmitters Object T H E Transmitters Remote Seals Direct Mod E Temperature Measurement Products Obje H Location Object Type Group E E Plant amp Mill Object Type Group Plant Fieldbus System Specific Object Type Group Project Fieldbus System Specific Object Type Grou E Project Library Sample Object Type Group E Project Library Template Object Type Group r Declarations FM FP 2600T_FM_e 04 10 2003 7 25 Decla False Declarations W GA Declarations FM 15 2600T_FM_e 04f10 2003 7 25 Decla False Declarations W QA Declarations of Con
87. roup of assets View Spare Parts Lists spare parts in the CMMS for a particular asset or group of assets View Work Order History Lists the history of all work orders in the CMMS for a particular asset or group of assets Maximo Equipment ID The Maximo Equipment ID provides information for mapping the Industrial IT object to the Maximo equipment in the CMMS database for a particular Maximo Server Multiple Maximo Equipment IDs can be associated with the same asset thus providing the ability to map to more than one piece of equipment defined in Maximo 3BDD011750R4101 99 Instantiation new devices using the PROFIBUS Device Integration Library Section4 PROFIBUS Instantiation new devices using the PROFIBUS Device Integration Library If a new device is to be instantiated its object type from the PROFIBUS Device Integration Library s device specific catalog should be used For PROFIBUS object types are stored inside the Object Types gt Control System gt AC 800M C Connect gt Controller Hardware catalog The object types listed there contain all of the features provided by the PROFIBUS Device Integration Library t Object Type Structure E E Object Types H 3 rd party OPC server support Object Type Group E ABB System Object Type Group E Asset Monitors Object Type Group E Asset Optimization Object Type Group E Control System Object Type Group my AC 800M C Connect Control
88. rror free communication for a field device with a DTM an additional setting must be made for the AC 800M controller in the Plant Explorer In order that field devices can be accessed with DTM Device Type Manager via the AC 800M controller the communication path Tool Routing must be enabled in each controller Only when Tool Routing is enabled communication with DTMs for field devices o is possible in the 800xA system Tool Routing is disabled by default In order to activate it the processor module of the AC 800M controller e g PM860 TP860 is selected in the Control Structure The Control Properties aspect appears in the aspect window Select the aspect to open an overview of the various properties of the module in the main Plant Explorer window One of the property entries is TOOLROUTING 3BDD011750R4101 39 Pre configuration of the AC 800M controller Section 2 Getting Started Set this Property Value to Enabledand click Apply E Control Structure Asset Monitoring Server Asset Monitoring Server B Root Domain Control Network Control Network Ei 2B Project Control Project E E Applications Application Group E Controllers Controller Group i Controller_1 AC 800M SF Access Variables Access Variables H E Applications Application References S Hardware Control Hardware Group E o Pme60 TP830 1 Ethernet 2 Ethernet 3 Com 4 Com 11 ModuleBus 1 ar95 PA101 264A5_HART 2 aos
89. rtain operational conditions result in downgraded process performance leading to personal injury or death Therefore comply fully with all Caution notices 3BDD011750R4101 9 Document Conventions About This Book Document Conventions The following conventions are used for the presentation of material 10 The words in names of screen elements for example the title in the title bar of a window the label for a dialog box field are written with initial capital letters Capital letters are used for the name of a keyboard key if it is labeled on the keyboard For example press the ENTER key Lower case letters are used for the name of a keyboard key that is not labeled on the keyboard For example the space bar comma key and so on Press CTRL C indicates that you must hold down the CTRL key while pressing the C key to copy a selected object in this case Press ESC E C indicates that you must press and release each key in sequence to copy a selected object in this case The names of pushbuttons and toggle buttons appear in brackets and bold type For example click OK The names of menus and menu items appear in bold type For example the File menu The following convention is used for menu operations MenuName gt Menultem gt CascadedMenultem For example select File gt New gt Type The Start menu name always refers to the Start menu on the Windows taskbar System prompts messages appear in t
90. s are activated deactivated on the basis of the user role as well as the communication mode Communication disabled enabled 3BDD011750R4101 73 Fieldbus Management Section 3 Fieldbus Builder PROFIBUS HART Fieldbus Management node The Fieldbus Management master node element in the fieldbus tree window provides access to general settings for the Fieldbus Builder PROFIBUS HART via the context menu Context menu Field Function Communicati The absence of a tick beside on enabled Communication enabled indicates that the fieldbus tree is in Communication disabled mode This is also indicated in the status bar Enable Communication Configure OPC server Syncronize DTM related paths Help About Configure Reads the fieldbus topology and OPC Server transfers this to the OPC Server PH Synchronize Synchronizes DTM and OPC data with DTM related all Aspect and Connectivity Server path configured in the FBB PH Settings aspect Help Calls the help function About Displays Fieldbus Builder PROFIBUS HART license and revision information Communication disabled mode is activated by default Depending on the mode selected the DTMs will offer the user various functions Table 4 Fieldbus Management modes Mode Function Communication disabled For planning and changing the fieldbus structure mode Communication enabled Activates all functions required for communic
91. s the work with Bulk Data Manager Industrial IT 800xA System Configuration 3BDS011222 The document describes the concepts and how to configure the 800xA System in a step by step form Industrial IT 800xA Asset Optimization Configuration 3BUA000118 The document describes the basic features and how to configure Asset Optimization Industrial IT 800xA Control and I O PROFIBUS DP Wiring and Installation 3BDS009029 The document describes the installing of the PROFIBUS network Industrial IT 800xA Control and I O PROFIBUS DP Engineering and Configuration 3BDS009030 The document describes the configuration of the PROFIBUS DP V1 in the 800xA System 3BDD011750R4101 Section 1 Introduction Product Overview Product Documentation Figure 1 Components of the PROFIBUS Device Integration PROFIBUS is an international standardized communication protocol for the manufacturing and process industries Two different fieldbus types are supported for the 800xA system PROFIBUS DP the high speed bus with scalable transmission rates up to 12 Mbit s and optimized for interaction with field devices such as remote I O drives motor controller PROFIBUS PA is a serial 2 way communication bus with 31 25 kbit s designed for connection of bus powered 2 wire field devices such as transmitters and actuators It can be also
92. se The PROFIBUS Device Integration must be installed on the following computers e Any workstation from which the user wants to have access to field devices via FDT DTM e Any Connectivity Server installed in the system e Any Aspect Server installed in the system lo gt We recommend that the Device Integration is installed on every PC used in the system except Thin Client nodes Asset Monitors and CMMS Connectivity will only run with the PROFIBUS Device Integration if the Asset Optimization option and the related CMMS software is installed and licensed in the system During installation of the PROFIBUS Device Integration a Device Integration Library is also implemented in the system We recommend that only the field devices deployed in the system by the library are used for fieldbus engineering The device object types in the Device Integration Library have been tested together with the associated real field devices in the 800xA system This assures the user full functionality without additional integration effort Licenses for device specific DTMs are not subject to the System 800xA licensing arrangements and are not included in the PROFIBUS Device Integration Licenses for device specific DTMs should be applied for from the relevant device manufacturer Unless described in more detail object types and aspects of the Device Integration software are configured and may not be modified by the user ABB Service must be
93. stored on the 800xA system DVD CDs Intended User The configuration document is designed specifically for planning engineers commissioning engineers and maintenance personnel Those using this document should be familiar with the basic method of operation of the PROFIBUS protocol Product Support Contact ABB technical support for assistance in problem reporting 22 3BDD011750R4101 Section 2 Getting Started Overview This section uses actual examples to describe how device objects with asset monitors are used in a fieldbus system and how DTMs are started Information about DTM functionality can be found in each device specific description Prerequisites and Requirements The following requirements must be met in order to be able to carry out the actions described in this section e All necessary software is installed on the related system node Please refer to Industrial IT 800xA System Installation 3BSE034678 for detailed information e DCOM settings for PROFIBUS Device Integration components are adapted according Industrial IT 800xA System Post Installation Setup 3BUA000156R4101 manual e A directory must be shared for DTM access on every system node Please refer to Industrial IT 800xA System Post Installation Setup 3BUA000156R4101 manual section Shared Folder for PROFIBUS and HART Device Integration e An 800xA system has been created and started 3BDD011750R4101 23 Fieldbus topology in the 8
94. tem Ald PNO ID 0004C2 Tasks Control Task Group E ABB_263 265_YPO_v1_0 ABB_263 265_Empty Module ABB_263 265_Al_Short ABB_263 265_Al_Long Upload Hardware Definition File 4j r 8 waltke ABB Figu 3BDD011750R4101 re 5 Update PROFIBUS Device HWD File aspect 31 Preparing Hardware Definition files hwd for Control Builder M Section 2 Getting Started 5 Select the device which shall be inserted in the project Use the pull down menu Select Device gt Upload Hardware Definition File Select Device AB B_263 265_YP0_v1_0 ins ABB_263 265_YPO0_v1_0 PNO ID FileName TZIDC PA TZIDC 110 210 TFx12 PA Temp Transmitter HI2600 PA 262 264 amp ABB_263 26 TBB2PH pH ORP plON ABB_263 265_Empty Module ABB_263 265_Al_Short ABB_263 265_Al_Long DeviceDesription Figure 6 Select Device 6 Click Upload Hardware Definition File UpdateHWD xi Hardware Definition file YPO004C2_v1_0 hwd is copied to Hardware Definitions you can import the fie into Control Builder by File gt Import gt Hardware Definitions Note If you have already imported this file into your project please delete the file from project folder and restart Control Builder reopen project Figure 7 Upload message box 7 Click OK The hwd file is now copied to the Control Builder M project directory Please go ahead with System 800xA Server Path Set
95. the PROFIBUS Device Integration Library the Device Type Manager DTM is installed automatically on the 800xA s system node Licenses for device specific DTMs are not subject to the System 800xA licensing arrangements and are not included in the PROFIBUS Device Integration Package Licenses for device specific DTMs should be applied for from the relevant device manufacturer Device specific DTMs need to be installed on every 800xA system node on which the PROFIBUS Device Integration is executed The DTM specific licensing arrangements need to taken into account Device object types cannot be used or instantiated if the associated DTM is not installed 3BDD011750R4101 Section 2 Getting Started Installation of Device Type Manager DTM Installation of Device Type Manager DTM This subsection can be skipped if the device object type is installed separately via Device Library Wizard The installation of the Device Type Manager DTM is mandatory for object types which are used in the field device topology In case that the DTM is already installed on the system nodes this subsection is not applicable Notice that it is mandatory to install specific Device Type Manager DTM before the device object is instantiated in Plant Explorers Control Structure That applies also to device objects coming into the system as instances in an already created Control Structure via import e g during upgrade or recovery procedures Detailed i
96. tings on page 33 Alternative the procedure described in Update Hardware Definition can be performed to copy Hardware Definition files to the Control Builder M project 32 3BDD011750R4101 Section 2 Getting Started System 800xA Server Path Settings System 800xA Server Path Settings Once the shared folder please refer to Industrial IT 800xA System Post Installation Setup 3BUA000156R4101 manual section Shared Folder for PROFIBUS and HART Device Integration has been enabled it is necessary to notify the paths to the Fieldbus Builder PROFIBUS HART and the OPC Server 1 Open the Control Structure in the Plant Explorer workplace 2 Select the FBB PH Settings Aspect at the Root Object in the Aspect window Aspects of Root Modified Desc Inherited Category name al Admin Structure 23 8 2004 15 57 43 Adm False Admin Structure Admin Structure 23 8 2004 15 57 43 Adm False Admin Structure amp Control Structure 30 8 2004 11 04 34 Con False Control Structure Do Domain Definition 23 8 2004 15 57 43 False Domain Definition Domain Type Reference 23 8 2004 15 57 43 The False Domain eres PH Settings 1 9 2004 10 14 20 False General Propert 2a Functional Structure 23 8 2004 15 57 42 Fun False Functional Stru amp Location Structure 23 8 2004 15 57 42 Loca False Location Structure eName 23 8 2004 15 57 42 The False Name amp System Structure 23 8 2004 15 57 58 Syst False System Structure
97. tion is installed and licensed Table 8 DIP Asset Object Types Extension Definition Aspect Function Asset Reporter The Asset Reporter provides a detailed view of an asset condition for an object It displays information available to it from all Asset Monitors and their corresponding current subconditions Asset Viewer When the Asset Viewer is added to an object the Asset Condition Tree can be displayed When displayed the Asset Condition Tree shows the condition of that object and all its children visually indicating the presence of a fault report by displaying items in bold text Context menus permit fault report submission directly from within the Asset Viewer PROFIBUS Channel Asset Generic asset monitor for devices for monitoring the Monitor status byte states of PROFIBUS device PROFIBUS generic Asset Generic asset monitor for devices for monitoring the Monitor diagnosis states of PROFIBUS device PROFIBUS lt specific gt Device Asset Monitor optional Specific asset monitor for devices for monitoring device specific conditions of PROFIBUS device 3BDD011750R4101 97 CMMS Connectivity Section 4 PROFIBUS Device Integration Library CMMS Connectivity 98 CMMS Connectivity establishes the link that removes the barrier to information exchange between the Computerized Maintenance Management System CMMS and the process control system environments and brings mainte
98. ucture B Controller _1 AC 800M A Device Management 09 16 2003 11 2 Provi False Device Manage SY Access Variables Access Variables Fieldbus Management 09 16 2003 10 5 Mana False Fieldbus Manag E Applications Application Referenced Hardware Unit 09 16 2003 10 5 Cont False Hardware Unit Hardware Control Hardware Group Name osfieons 10 5 The False Name EJ 0 pmaeo TP830 ean iisi 1 Ethernet gt g is noe 2 sia DIB Fieldbus Management Sacn O19 1 41895 a02 aless c1 E 11 Modules TAE OS PAIN 26445_HART O alsss c2 2 A0895 a Oe avess c3 0 1 crass O2 ales5 c4 EG System Alarms and Events System 2 Alg95 C5 4 48 Tasks Control Task Group o 5 AlI895 C6 Lost And Found o 2 Al895 C7 H 6 OPC Servers System Alarm and Event Group g gt AI895 C8 2 J 4 rf Omne Scannotactve Figure 34 Fieldbus Management view The user interface comprises four areas e Fjeldbus tree window e Object information window e Message window Status bar 3BDD011750R4101 71 Fieldbus Management Section 3 Fieldbus Builder PROFIBUS HART Fieldbus tree window The fieldbus tree window displays the fieldbus structure part of the Control Structure along with the channel information from the parent object higher level object 18S Fieldbus Management 2 09 1 41895 Als95 c1 PA101 26445_HART O 2 aless c2 O 2 l895 c3 O 2 Al895 C4 O 2
99. used to select all Upload Line device objects on the same level bevnlsad Line Upload Line This function calls the selected DTMs without GUI reads the current data from the fieldbus devices and uses this as the new instance data The function is only available in Communication enabled mode Download Line This function calls the selected DTMs without GUI and downloads the instance data to the fieldbus devices The function is only available in Communication enabled mode 76 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Device object Fieldbus Management The context menu for the device object node features DTM functions without GUI specific to the object and the lower level sub tree structure Here too the menu enables the selection of lower level fieldbus structures and their device objects As long as the DTMs support the services offered device object data can be read or written or parameters in the device and in the instance data set simply compared A Please note that some of the menu items in the context menu may not be supported by a DTM e g Online Compare Context menu Field Function Expand Expands the topology tree below the channel object node Import Import Imports the device specific instance Bee data set from a file bl ala More information about this function can Tea be found in the Backup Restore Upload section Export Exports the device s
100. window functions Field Functions Empty The error message or information icon appears here Time The date and time for the result is entered Object Object name Message Message text for the result A Select a field to sort the entries Select the same field again to invert the sort 3BDD011750R4101 81 Fieldbus Management 82 Status bar Section 3 Fieldbus Builder PROFIBUS HART The status bar indicates the current Fieldbus Management mode Communication disabled enabled as well as the time characteristic of any DTM actions executed Table 7 Fieldbus Management status bar Field Functions Icon mode The current mode Communication disabled or enabled appears here Progress bar Progress bars appear for functions requiring lengthy execution times This progress bar does not indicate the execution progress It only indicates that a function is being executed Why For example the PROFIBUS HART Fieldbus Builder starts the appropriate DTM for downloading an instance data record to a PROFIBUS field device The DTM itself downloads the data and only the DTM knows the current status of the download process The DTM only notifies the Fieldbus Builder PROFIBUS HART at the end of the process if the download was successful or was terminated with errors This is logged in the message window 3BDD011750R4101 Section 3 Fieldbus Builder PROFIBUS HART Device Management Device

Industrial IT, 800xA - Device Management, PROFIBUS, Configuration

Contents

Download Pdf Manuals

Related Search

Related Contents