Admin/Hosp_Furniture /2013-2014
Contents
1. Provision for I V Rod Freight saving knock down construction Fowler Bed Specification Dimension 2090 2100mm L x 915 920mm W x 600 610mm H with bed frame approx size 1980 2000mm L x 915 920mm W The main frame should be madefrom 6cms x 3cms x 16 G ERW rectangular tubes Four sections topshould be made from 18 G C R C sheets uiformly perforated and shouldbe suitably fitted to the main frame Back rest and knee rest should be maneuvered by the screw mechanism welded with approx 31 7mm dia x 16 G ERW M S Tube for linear movement in a approx 38mm dia x 16 G ERW M S covers tube which can be smoothly operated on thrust bearings Two detachable handle shall be provided chrome plated with PVC grip Detachable Head and Leg Bows Should be made from stainless steel 31 7mm dia x 18 G tube with laminated panels of apporx size 810mm L x 140mm wide x 14mm thick on stainless steel bracket The base frame should be fitted with non rusting swivel castor wheels 125mm dia 2 with brake 2 without brakes The bows should be bolted to the frame on brackets welded to the bows in such a way that bolt or nut should not appear on top surface of the bed frame Telescopic SS Four IV Rods A mattress suitable for the bed made of 25mm thick soft density top layer and 75mm thick high density bottom layer for the patient comfort and better pressure 80 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 14 care2. The upper part of cover of the mattress is made of waterproof breathable fabric separated by zip on three sides with lower cover part made of rexine OR 100 mm thick PU foam 40 density suitable mattress covered with good quality rexine Pediatric Bed Specifications Size Buffer to buffer 1480 1500 mm L x 820 850 mm W x 600 610 mm H fixed height Platform dimension 1430 1440mm L x 760 770mmW Mattress platform 1350 1360L x 705 710mm The main frame should be made from 6cms x 3cms x16G ERW rectangular tubes Two sections top should be made from 18 G C R C sheets uniformly perforated and should be suitably fitted to the main frame Detachable Head and Leg Bows Should be made from polymer moulded bows of height approx440 mm which should be provided tube insert of 31 7mm x 18 GSS tubes at both the end of each bows for inserting into welded tube socket on four corners of bed frame The base frame should be fitted with high grade synthetic castors wheels 125mm dia 2 with brake 2 without brakes cross The backrest 65 amp Trendelenburg 10 12 ay reverse Trendelenburg 8 should be maneuvered by the screw mechanism One detachable handle should be provided Tubular telescopic collapsible side railing made up of stainless steel Four I V Rods Telescopic I V Rod S S saline rod with 12mm dia S S rod should telescope in SS socket tube 15 8 mm dia x 18 G welded on angular base bracket of 14G SS sheet Nylon bracket provided to preve
3. required from the sole manufactures that the Rates quoted are the same as they quote to other State Centre Govt and DGS amp D for the similar item s and these are not higher than those quoted by them c Authorized agents must submit an authority letter from their Manufacturer Principals on the letter had of the manufacturer principals in proforma given in Annexure II duly supported by an affidavit on Rs 5 non judicial Stamp paper duly attested by the Authority of Centre State Govt or Notary in the Court certifying that they are quoting Rates on behalf of them The authorization letter must give mention the purpose for which it will be allowed The validity period of the authorization letter must be mentioned to the authority letter otherwise letter will be liable to rejection Please furnish the S T C S T registration number the State U T of registration and the date of such registration Tenders not complying with this condition will be rejected Please furnish a certificate that no custom duty has been paid while importing the life saving goods and that no customs duty has been included in the quoted rates The tenderers should submit along with the tender a photo copy of the latest current valid income tax clearance certificate IT CC Each page of the tender form along with enclosed documents should be marked serial number by the tenderer The tender will not be considered as valid tender unless and until each page of documents
4. is properly signed amp stamped Any omission in filling the columns of Financial Bid form Schedule of Rates shall altogether debar a tender from being considered Unit and Rates should be filled up carefully by the tenderers All Corrections in this schedule must be signed by the tenderers The corrections made by using fluid and overwriting will not be Page 9 20 21 22 23 24 25 26 27 28 29 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 accepted and tender may be rejected This tender form is not transferable The detailed description specifications and quantity of the goods required is given in Annexure I The quantity mentioned in Annexure I will be subject to variation The competent authority of AIIMS Raipur reserves all rights to accept or reject any all tender s without assigning any reasons and also to impose relax any term and condition of the tender enquiry The tenderers should submit a certificate that rates charged by them are not higher than those charged from other State Central Govt departments institutions in India during 2013 14 A clear certificate to this effect should accompany the tender In case asked tenderer must personally give the demonstration of the manikin simulator to the competent authority of the institute and in that case all the demonstration expenses will be borne by the supplier In case the supplies are found defective at any stage the te
5. strips made of high quality epoxy plastic or steel material with convenient and smooth slide in and slide out motion At least 28 32 separate drawers in about six to eight row The front of the each drawer should be half covered on which removable medicine label can be pasted and upper half open to see content inside Approx size 750 L x 450 W x850 H mm Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 18 All stainless steel should 304grade 16 gauge Equipped with Waste bin needle disposable container file cassette amp guard rails Equipped with lock key system Swivel noiseless caster with brakes 10 cm diameter 13 Crash cart Size shall be more than 900mm L x500mm W x 1500mm H The crash cart should be made of 25 4mmx18G Stainless steel tubular frame work Shall have Epoxy Anti Microbial powder paint inside and out Should have dual push handles on either side Should have S S shelves six colored removable bins amp two polystyrene lockable storage units with three drawers each Facility to carry ECG Monitors Defibrillators etc on open areas at top centre and bottom shelves It Should have Stainless steel saline rod fixed with Two accessory mounting brackets to mount accessories anywhere without the need of pre threaded holes Crash cart should be mounted on 12 5 cms dia non rusting swiveling castor wheels with two having locking arrangement Oxygen cylinder stand epoxy powder coated on one si
6. the trolley should move with mattress base when foot section back section is adjusted 3 6 Frame should be made up of epoxy powder coated steel 3 7 Should have Central braking system with steering facility 3 8 Should be equipped with heavy duty castors diameter 150 mm 3 9 Should have bumpers at all the four corners of the trolley 3 10 Should have facility to fix IV rod at all the four corners and middle of mattress base frame 3 11 Should have place for fixing B Type Oxygen Cylinder 3 12 Dimensions Max Length 2000 2100 mm Max Width 730 750 mm Y 11016 158 2010 PC ECC Y 11016 158 2010 PC ECC Page No 49 Height 535 905 mm Trendelenburg 14 20 deg stepless Anti Trendelenburg 7 10 deg stepless X ray viewing area entire length 4 System Configuration Accessories spares and consumables 4 1 Anti static Hygienic Mattress 830mm with pull straps 01 pc 10 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 21 4 2 Collapsible Side Rails 01 pair 4 3 I V Rod 02 pc 4 4 Cylinder Holder for B Type Oxygen Cylinder 01 pc 5 Environmental factors None 6 Power Supply None 7 Standards Safety and Training 7 1 Product should be FDA CE or ISI approved 7 2 Manufacturer should be ISO certified for quality standards 23 Stretcher trolley 213L x 56W x 81H cms Frame work made of 31 mm x 1 60 mm vertical amp 25 mm x 1 22 mm horizontal CRC tubes Trolley mounted on 15 cms d
7. 0 610mm H bed frame approx size 1980 2000mm L x 915 920mm W The main frame should be made from 6cms x 3cms x 16 G ERW rectangular tubes Two sections top should be made from 18 G C R C sheets uniformly perforated and should be suitably fitted to the main frame Back rest should be manoeuvred by the screw mechanism welded with approx 31 7mm dia x 16 G ERW M S Tube for linear movement in a approx 38mm dia x 16 G ERW M S cover tube which can be smoothly operated on thrust bearings One detachable handle should be provided chrome plated with The bows should be made of approx 31 75mm OD x 18 G ERW tubes with head bow of 106cm H and leg bow of 81 cm H both head and the leg bows should have one tubular horizontal support approx 25mm dia x 18G ERW tube and three vertical supports of approx 15 80mm dia x 18G ERW tubes Bows should be provided with PVC shoes with nylon reinforcement molded on to the inside base of the shoe Four telescopic heavy duty IV rods Suitable two section mattress covered with good quality washable rexine All mild steel components should be thoroughly pre treated chemically to remove rust and foreign matter like Grease Oil etc by dip tank process pre treatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles 35 Orthopaedic Bed Fowler Orthopaedic bed with m
8. F No Admin Hosp_ Furniture 2013 2014 Page 24 ANNEXURE II M ANUFACTURER s PRINCIPAL s AUTHORIZATION FORM Clause 16 of the tender To The Administrative Officer All India Institute of M edical Sciences Raipur Dear Sir TENDER we _ who are established and reputable manufacturers of having factories at and_ hereby authorize Messrs name and address of agents to bid negotiate and conclude the contract with you against Tender No for the above goods manufactured by us Nocompany or firm or individual other than M essrs are authorized to bid negotiate and conclude the contract in regard to this business against this specific tender We hereby extend our full guarantee and warranty as per the conditions of tender for the goods offered for supply against this tender by the above firm The authorization is valid up to _ Yours faithfully Name For and on behalf of Messrs Name of manufacturers Principal Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 25
9. Furniture 2013 2014 supply order liquidated damages may be deducted from the bill 0 5 per week subject to maximum of 10 of the value of the delayed goods or services under the contract The competent authority of the institute may also cancel the supply in such a case bid security of the supplier shall stand forfeited The supply order may be cancelled and bid security deposit be forfeited in the following cases also a In case the tenderer on whom the supply order placed fails to make supplies within the delivery schedule and purchaser has to resort to risk purchase The purchaser AIMS Raipur may also recover from the tenderer or the difference between the cost calculated on the basis of risk purchase price and that calculated on the basis of rates quoted by tenderer b In case the goods are not supplied by tenderer on whom the supply order was placed and contract has to be cancelled The purchaser AIIMS Raipur may also recover from the defaulting tenderer the difference of price quoted by the tenderer and price quoted by next tenderer on whom supply order has to be placed c In case the quality of goods supplied are not in conformity with the standard given in tender and as per the samples supplied These goods shall also be taken back by the supplier and should be duly replaced with the tender quality goods If the price of the contracted articles is are controlled by the Govt the payment will in no case be made at hi
10. Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Cost Rs 2000 TENDER NOTICE For Hospital Furniture AIIMS RAIPUR Date 18 July 2013 On behalf of the Director All India Institute of Medical Sciences Raipur tenders in sealed cover are invited under two bid system from manufacturers and their authorised dealers distributors for providing Hospital Furniture for AIIMS Raipur The interested manufacturers and their authorised dealers distributors are required to submit the technical and financial bid separately The bids in Sealed Cover containing Technical Bid and Sealed Cover ll containing Financial Bid should be placed in a third sealed cover super scribed Tender For Hospital Furniture and should reach at the office of The Administrative Officer AIIMS Tatibandh Raipur CG 492099 before 1500 hrs on or before 16 8 2013 The bid received after due date and time will not be entertained whatsoever may be the reason The technical bids shall be opened on the same day at 1530 hrs at AIIMS Raipur In the event of any of the above mentioned date being declared as a holiday closed day the tenders will be opened on the next working day at the appointed time The tender document can only be downloaded from website www aiimsraipur edu in Those who download the tender document from website should enclose DD for Rs 2000 00 non refundable in favour of AIIMS Raipur payable at Raipur along with th
11. al Beds 8 Documentation 8 1 Certificate of Calibration and inspection from the factory 8 2 List of Equipments available for providing calibration and routine maintenance support as per manufacturer documentation in service technical manual 8 3 List of important spare parts and accessories with their part number and costing 8 4 Log book with instruction for daily weekly monthly and quarterly maintenance checklist The job description of the hospital technician and company service engineer should be clearly spelt out 8 5 Service manual in English 8 Bed side locker 160 Size l6inchL x 16inchW x 32inchH Framework Mild Steel Epoxy Powder Coated Stainless Steel Top of bed aside locker Made with Stainless Steel Sheet Top with three sides raise edges Top edge of the raised edges should be bent and pressed to 180 degree to prevent sharp edge One Storage Compartment and One Drawer The outside diameter of the legs of the locker should be 30 40 mm and thickness of 1 20 1 50 mm One Small Drawer under the Top of bed side locker To Keep Small Things for the User and storage compartment on the Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 17 Lower Side of the Unit With the Door Shoes made from hard rubber of uniform texture and chemically inactive to the action of mild acids 9 Over bed table 40 Size Top 810mm L x 352mm W Laminated top should be fitted on m
12. andset with rechargeable batteries with charger and with a warning signal of low battery 1 4 2 Stainless steel lifting pole 1 4 3 IV Rods 04No s heavy duty type 4 4 Oxygen cylinder cage 4 5 Moulded chart holder 4 6 Orthopedic traction pulley 4 7 Polymer moulded handle 5 Environmental factors 5 1 Shall meet IEC 60601 1 2 2001 Or Equivalent BIS General Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 16 Requirements of Safety for Electromagnetic Compatibility 5 2 The unit shall be capable of being stored continuously in ambient temperature of 0 50o C and relative humidity of 15 90 5 3 The unit shall be capable of operating continuously in ambient temperature of 10 40deg C and relative humidity of 15 90 6 Power Supply 6 1 Power input to be 180 270VAC 50 60Hz as appropriate fitted with Indian plug 6 2 Resettable over current breaker shall be fitted for protection 7 Standards Safety and Training 7 1 Electrical safety conforms to standards for electrical safety IEC 60601 IS 13450 7 2 Should be FDA or CE or BIS approved product 7 3 Manufacturer should have ISO certification for quality standards 7 4 Electric Shock Protection level Class B 7 5 Electric current Protection Class 1 7 6 Liquid ingress protection Ip54 7 6 Certified to be compliant with IEC 60601 2 38 Medical Electrical Equipments part 2 38 Particular requirements for safety of Electrically Operated Hospit
13. de 10 14 IV stand Overall approx size height 136 to 244 cm with adjustable height by turn knob Main Frame Strong amp Sturdy five legged neatly made base from stainless steel mounted on five 2 5cm diameter swivelling ball castors of good quality Stainless Steel four hocked I V rod 160 15 Patient examination table Overall approx size 1890 mm L x 560mm W x 840mm H Fixed upholstered top 64mm thick in two sections Body frame work made from 18G CRCA sheet and 20 mm x 40mm x 18 G MS Rectangular Tubes Couch fitted with stainless steel Legs Headrest adjustable on gas spring Upper section of box approx size 1220 mm L x 460 mm W x 630 mm H with three sliding drawers of approx size 320 mm L x 430 mm W x 75 mm H Lower section comprises of three cabinets of approx inside size 350 mm L x 440 W mm x 430 H mm with separate doors amp lock B P apparatus tray made of 18 G MS sheet of approx size 350 mm L x 120 mm W X 20 mm H provided on a swinging rod rotating through a bush welded on the body of the couch Should have Sliding Inbuilt Step Stool All mild steel components should be thoroughly pre treated chemically to remove rust and foreign matter like Grease Oil etc by dip tank processpre treatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust 30 T
14. e movement two with brake cross wheels with diameter around 15 20 cms 31 Stainless steel operation instruments trolley with bucket ring Length 770 cm X Width 470 cms X Height X 800 cms with bucket ring and handlegrip Material stainless steel anti corrosive 10 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 23 The whole structure is made of stainless steel firm durable and beautiful Double layer shelf makes more convenience for carrying operation instruments Noiseless 4 castors create smooth and flexible movement two with brake cross wheels with diameter around 15 20 cms 32 Fan Shape Stainless Steel Operation Apparatus Trolley 1370 mm Length X 400 mm Width X 1000mm Height Stainless steel frame strong and durable anti corrosive Two layer with bars on three sides on each layer Five noiseless castors with brakes cross type Fine polish and easy clean 33 Rolling shifter sliding pad to shift patient from OT table to trolley 120 x40 cms 1 5 Kg X 16 inches can be cleaned with wet wipes and any hospital disinfectant Inner core is made up of plastic coated with glass fiber fabric Roll material is made up of tear resistant and antibacterial nylon fabric 34 Kick Bucket SS Bowl approx 350 mm dia Frame should be made of SS pipe Provided with 75mm castor SS should be used if 304 quality 10 Tender Enquiry No
15. echanically operated back rest 0 to 70 amp knee rest 0 to 35 all by Super Smooth crank mechanism Size 2150 x 900 x 500 mm Epoxy Coated Steel frame work and 4 section perforated top Stainless Steel Orthopaedic attachment without weight chain and weight hangers Head panel and foot panel equipped with safety lock and roller bumpers Mounted on protective stumps Provision for I V Rod Freight saving knock down construction Orthopaedic Bed S S Multi Function Orthopaedic bed with mechanically operated back rest 0 to 70 amp knee rest 0 to 35 and trendelenburg TR all by crank mechanism Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 13 Knee rest portion sectioned in two parts for patient s convenience Size 2030 x 900 x 530 mm Stainless steel frame work and 5 section top Balkan Frame with monkey bars and monkey chains Pulley attachment without weight chain and weight hangers Four swivel castors all with individual brakes Provision for I V Rod Freight saving knock down construction Orthopaedic Bed with ABS Panels Orthopaedic bed with mechanically operated back rest 0 to 70 amp knee rest 0 to 35 by super smooth crank mechanism Size 2150 x 940 x 500 mm Epoxy coated mild steel frame work and 4 section perforated top Removable high quality ABS head amp foot panels Mounted on protective stumps Bumper Protection at four corners
16. eir technical bid in the Cover Technical Bid The bid security EMD for Hospital Furniture of Rs 3 00 000 Rupees Three Lakhs Only should be paid by Demand Draft in favour of AIIMS Raipur payable at Raipur and will be placed in cover 1 with technical bid The Tender Documents are not transferable Any future clarification and or corrigendum s shall be communicated through Administrative Officer on the AIIMS Raipur website www aiimsraipur edu in Administrative Officer AII MS Raipur Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 1 Table 1 Details about the title of items and quantity S No ITEM S WITH SPECIFICATION QUANTITY 1 Hospital bed with two section 35 2 Fowler Bed 80 3 Pediatric Bed 5 4 Orthopaedic Bed Fowler 5 5 Orthopaedic Bed S S M ulti Function 3 6 Orthopaedic Bed with ABS Panels 2 7 ICU beds advance model with mattress having water proof cover _ 20 8 Bed side locker 160 9 Over bed table 40 10 Surgeons chair 5 11 Dressing trolley 20 12 M edicine trolley 15 13 Crash cart 10 14 IV stand 160 15 Patient examination table 30 16 Linen Fold Table 10 17 Sorting table utility table 10 18 Ward Screen Stainless Steel with Curtain 25 19 Platform foot steps single step 10 20 Platform foot step double step 10 21 SS swab rack 5 22 Emergency patient
17. ender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 19 particles 16 Linen Fold Table It should have approximate size 2200 2400 x 800 x 900 mm LxWxH The top will be of S S 304 grade 16 SWG sheet Legs frame will be of 40 x 40 mm square pipe 16SWG It will also have adjustable bullets for legs The corners will be smooth rounded so that there are no sharp edges The welding will be with TIG argon arc smooth finished and polished with mat finish 10 17 Sorting table utility table It should have size approx 1200 x 650 x 900 mm LxWxH The top will be of S S 304 grade 16 SWG sheet It will have one under shelf of S S 304 18 SWG sheet Legs frame will be of 40 x 40 mm square pipe 16SWG_It will also have adjustable bullets for legs The corners will be smooth rounded so that there are no sharp edges The welding will be with TIG argon arc smooth finished and polished with mat finish 10 18 Ward Screen Stainless Steel with Curtain Overall approx size 1680mm H x 2450mm W MS tubular construction in there sections made of 19mmx 18G Mild steel round tube Frame mounted on 25 4mmx18G mild steel round tubular base Middle span 1210mm wide mounted on four swivel castors 50mm dia Side spans 610mm wide each rotating on the Swivel castors 50mm dia Supplied with hooks amp springs with curtain cloth All mild steel components should be thoroughly pre treated chemically to rem
18. gher rate than the controlled rate The description and quantity of the items needed is mentioned in Annexure I but it is approximate detail and is subject to increase decrease at the discretion of the competent authority of AIIMS Raipur Delivery of material must be made within stipulated period of the issue of the supply order If tenderer fails to do so the condition no 8 of terms amp conditions will be applicable Where the specifications are as per tenderer s range of product amp tenderer s offer should mention that the item meets all specifications as per the tender enquiry and if there are improvements deviations the same should be brought out on separate Letter Head of the firm It would be discretion of the competent authority of the Page 8 14 15 16 17 18 19 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 institute to accept or reject such deviations which are not in accordance with our required specifications as per Annexure I It must be mentioned clearly whether tenderer is manufacturer sole manufacturer Authorized agents for the items for which he is quoting a Manufacturer must add a certificate that item s is manufactured by them as per range of products b Sole Manufacturers must add a certificate that they are the sole manufacturer of the Item for which they are quoting in this tender enquiry amp item is are their proprietary Item in India The rate certificate is also
19. hall be served by either party within 60 days of the beginning of such dispute failing which all Right sand claims under this Agreement shall be deemed to have been forfeited and absolutely barred Before proceeding with the reference the arbitrators shall appoint nominate an umpire In the event of the arbitrators not agreeing in their award the Umpire Appointed by them shall enter upon the reference and his award shall be binding on the Parties The venue of the arbitration shall be at Raipur The arbitrators Umpire shall give reasoned award a The provision of the Indian Arbitration and conciliation Act 1996 in force and the rules framed there under and any statutory modifications there of shall be deemed to apply and be incorporated in this agreement b Upon every or any such reference the cost of any incidentals to the reference and award respectively shall be at the discretion of the arbitrators or in the event of their Not agreeing of the Umpire appointed by them who may determine the amount Thereof or direct the same to be fixed as Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 11 between solicitors and client or as between Parties and shall direct by whom and in what manner the same shall be borne and paid c The supplies to be made under this supply order contract shall if reasonably possible continue during arbitration proceedings and no payments from or payable by the institute shall be withheld on acc
20. he financial bid 4 Rates should be mentioned both in figures and in words The offer should be typed or written in Ink Pen or Ball Pen Offers in pencil will be ignored Telegraphic Telex Fax offers will not be considered and ignored straightway The supplier shall certify that the rates being quoted are not higher than those quoted to any government department or Institution or DGS amp D and that if during the years 2013 14 at any time the supplier has quoted rates lower than those quoted against this tender the Institute the purchaser would be given the benefit of lower rates by the Supplier 5 The competent authority reserves all rights to reject the goods if the same are not found in accordance with the required description specifications quality 6 Tender will be regarded as constituting an offer open to acceptance in whole or in part at the discretion of the competent authority of the institute for a period of 180 days 6 months valid from the date of opening of the tender by the committee 7 The F O R in this case is AIIMS Raipur 8 The time for a date of delivery dispatch stipulated in supply order shall be deemed to be essence of the contract and should the supplier fail to deliver or dispatch any consignment within the period prescribed for such delivery or dispatch in the Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 7 10 11 12 13 Tender Enquiry No F No Admin Hosp_
21. ia castors 2 with brakes Removable stretcher top made of 1 22 mm aluminium sheet with S S handle at both end with 25mm thick suitable rubber Mattress covered with good quality rexine Arrangement to fit a oxygen cylinder All mild steel components should be thoroughly pre treated chemically to remove rust and foreign matter like Grease Oil etc by diptank process pre treatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles 40 24 Wheel Chairs Overall approx size 670mm W x 1120mm D x 920mm H Welded frame construction of round tubes Two solid rubber tyred bicycle wheels with brakes amp self propelling stainless steel hoops Minimum Frame size of round steel 22 2 x 18 G tubes and 19 05 x 18 G tubes Mild steel tubular construction fitted with cushion seat and back Wheel chair is fitted with minimum 24 dia rim of bicycle wheel fitted on specially developed and heat treated axle with solid tyre in the rear In the front minimum 150mm dia castor wheels are fitted In front of castor wheels aluminum foot paddles are provided on adjustable brackets Two handles are provided with the hand grips Brakes are provided on rear wheel to hold the chair to stop in 5 degree ramp All mild steel components should be thoroughly pre treated chemically to remove rust and foreign
22. ild steel square tubular telescopic stem with geared Handle for height adjustment from approx 760mm to 1050mm Base frame should be of mild steel rectangular tubular base frame mounted on four castors of50mm dia All mild steel components should be thoroughly pre treated chemically to remove rust and foreign matter like Grease Oil etc by dip tank process pre treatment system The treated Metal Surface should havecoating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles 10 Surgeons chair 5 Cushioned seat and back Pneumatic height adjustable Height adjustable and swinging back rest 5 legs chrome plated base with foot ring Base fitted with 50 mm dia castors 11 Dressing trolley 20 Complete made up stainless steel Two SS shelves over with SS Railing on all four sides The trolley fitted with SS bucket amp SS Bowel The trolley mounted on 100 mm diameter castors Finish Pre treated amp Epoxy powder coated Approx size 36 x18 x32 Four wheels with locking and unlocking system should be available Tubular frame work Two drawers made of SS below upper shelves Shelves should be of SS 304 Grade steel So that is should not rust and last for years 12 Medicine trolley 15 Frame work made from SS steel material Flat top of SS and at least 6 inch deep removable bucket at bottom Should have multiple long drawers to hold drug
23. matter like Grease Oil etc by dip tank process pretreatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles 10 25 Wheel chair folding Seat and back easily removable and replacable Fine and durable upholstery for seat and back Nylon handgrip and padded arm rest SS construct Solid tyre wheels with Rear wheel locks Aluminum leg rest All stainless steel should be 304 grade 16 gauge 10 26 Soiled linen trolley Overall approx size 910mm H x 510mm dia SS tubular framework fitted with three swivel castors 100mm dia Framework made of 25 4mm dia x18G verticals 10 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 upper ring made of 19mm dia x 18G tube and support stays of 15 8mm dia X 18G stainless steel tubes Supplied with canvas bag All SS components should be of 304 quality 27 Gynaecological examination table with stirrup Specifications size length 1830 mm width 575mm height 850mm frame CRCA Sheets and rectangular tubes Three cabinets one with lock Drawer with lock Choir mattress with U notch Examination trolley with three tray Pretreated and epoxy power coated With attached foot step Accessories for sheet paper roll attachment optional 28 Watson Jones Fracture Table Fracture table on Wat
24. nderer will have to replace defective material with standard material Any cost incurred by the institute to meet the eventuality of defective supplies shall also be recoverable from the tenderer Institute may also take action under Clause 8 of the Tenders well Full description amp specifications make brand and name of the manufacturing firm must be clearly mentioned in the tender failing which the tender will not be considered The tenderer must also mention whether the goods are imported indigenous Descriptive literature catalogues must be attached with the tender in original failing which tender may be ignored The tenders received without sales tax number VAT number and other documents called for may render the tender invalid Tenders should be sealed with cello tape amp sealing wax Unsealed tenders will not be entertained and such tenders will be ignored straightway Tenders must be submitted on the prescribed Tender Form otherwise tender will be ignored straightway Tenders must accompany with a Demand Draft FDR of Earnest Money as specified in tender document in the name of AIIMS Raipur Earnest Money must be valid for 45 days beyond the bid validity period from any scheduled bank of India a Earnest Money deposited with AIIMS in connection with any other tender enquiry even if for same similar material Stores by the tenderer will not be considered against this tender b The Institute will return Earnest Money to the un
25. nquiry No F No Admin Hosp_ Furniture 2013 2014 Page 20 aluminum pop rivet Legs fitted with PVC Shoe with nylon reinforcement All mild steel components should be thoroughly pre treated chemically to remove rust and foreign matter like Grease Oil etc by diptank process pre treatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles 21 SS swab rack Overall approx size 137Hx76Wx46D Frame works of SS tubes mounted on 10 cm diameter castors with brakes Eight rows six hooks in each row SS tray fitted on bottom All the stainless steel should be 304 grade 16 gauge 22 Emergency patient trolley 1 1 Emergency patient Trolley is required for Patient transfer to amp fro to ICU OT 2 1 Demonstration of the equipment is a must Technical specifications 3 1 Should have three sectional mattress base made of X Ray translucent high pressure laminate with facility to insert X Ray Cassette from either sides amp ends of the trolley 3 2 Should be able to X Ray the patient from positions along the entire length and width of the trolley 3 3 Should have pneumatic stepless adjustment for back section Trendelenburg reverse trendelunberg and foot section 3 4 Should have hydraulic height adjustment with a foot paddle on either side of the trolley 3 5 Frame of
26. nt colour damage Two section mattress with 4 thick PU foam of 40 density covered with PVC All mild steel components should be thoroughly pre treated chemically to remove rust and foreign matter like Grease Oil etc by dip tank process pre treatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles ICU beds advance model with mattress having water proof cover _ 1 Description of Function 1 1 ICU Beds are required in the Intensive Care for comfort amp safety of the patient and to facilitate comfortable transfer to and fro emergency OT Wards etc It is also required to carry out point of care procedures including radiological procedures at the bedside 2 Operational Requirements 2 1 The system should be electrically operable and adjustable for heights trendelenburg etc It should also be having radiotransluscent top for carrying out X Ray at the bedside 2 2 Demonstration of the system is a must 3 Technical Specifications 3 1 Should have Five section mattress base with polypropelene platform 20 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 15 perforated type easily removable to clean wash fumigation and disinfection 3 2 Should have X Ray translucent back section made up of high pressure laminate 3 3 Should have X Ra
27. ount of such proceedings except to the extent which may be in dispute The due date and time of receipt of tenders is 1500 hours on 16 August 2013 Any tender which is received late after 1500 hours on the due date shall not be considered 32 The technical bid shall be opened on the same day at 1530 hrs In the event of the date of receipt or opening of tender being or being declared a holiday for the AIMS Raipur the due Date of receipt opening of the tender will be the following day at the same hour The tenders shall be opened in the presence of attending tenderers or their authorized representative 33 The Courts in Chhattisgarh alone and no other Court will have the jurisdiction to try and matter dispute or reference between the parties arising out of this tender supply Order contract 34 A pre bid meeting is planned on 05 Aug 2013 at 11 AM which may be attended by the bidders 35 Sample Requirement One brochure displaying clearly the sample product is to be attached with the tender I We hereby accept the terms and Conditions given in the tender Signature amp Stamp of the bidder Note Please sign each page of document including terms amp conditions amp tender Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 12 ANNEXURE Medical furniture S No Items with specification Quantity Hospital bed with two section Overall approx size 2090 2100mm L x 915 920mm W x 60
28. ove rust and foreign matter like Grease Oil etc by dip tank process pretreatment system The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust Particles 25 19 Platform foot steps single step Overall step size approx 505mm L x 305mm W First step height 230mm approx Step made of 18G CRCA sheet Welded on MS Tubular frame of 25 4mm x 18G fitted with alumnium tread flats of size 500mm L x 32mm W x 3 4 mm thick fitted by aluminum pop rivet Legs fitted with PVC Shoe with nylon reinforcement All mild steel components should be thoroughly in house pre treated chemically to remove rust grease oil etc by dip tank processes including separate degrasing pickling phosphating each followed by water rinising passivating and hot air drying to give phosphate coating The treated metal surface should then be coated inhouse with epoxy polyester powder with paint film thickness of 50 microns minimum and oven baked at 180 deg to 200 deg centigrade 10 20 Platform foot step double step Overall Step size approx 505mm L x 305mm W First step height 230 mm approx amp second step size 450 mm approx Step made of 18G CRCA sheet Welded on MS tubular frame of 25 4mm x18G fitted with aluminum tread flats of size 500 mm L x 32 mm W x 3 4 mm thick fitted by 10 Tender E
29. ration trolley 8 Stainless steel operation instruments trolley Without bucket 30 ring 5 31 Stainless steel operation instruments trolley with bucket ring 10 32 Fan Shape Stainless Steel Operation Apparatus Trolley 4 33 Rolling shifter sliding pad to shift patient from OT table to trolley 5 34 Kick Bucket 10 The above quote should include all applicable taxes Declaration by the Bidder 1 This is to certify that I We before signing this tender have read and fully understood all the terms and conditions contained in Tender document regarding terms amp condition of the contract I we agree to abide them during the Contract period No other charges would be payable by Client and there would be no increase in rates Signature of Bidder with seal PIACES vcicdiciveeitnahadebete dances Name Date n EEEE Seal Address Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 6 For Hospital Furniture All MS Raipur TERMS amp CONDITIONS OF THE TENDER Annexure to Agreement The important Terms and Conditions are listed below for convenience 1 Rates quoted should be inclusive of packing forwarding postage and transportation charges etc 2 The rates quoted in foreign currency will not be entertained in this tender enquiry amp such tenders will be ignored straightway 3 Sale tax if applicable is not to be quoted separately and inclusive of all taxes is to mentioned in t
30. son Jones design with padded back rest adjustable height distance radiolucent pelvic post with counter traction rod of small medium and large sizes for patients of different ages And lowerlimb 2 traction rods with adjustable traction and distance mechanism for both lower limbs with foot pads padded of 3 sizes small medium and large and straps Alternate arrangement of shoes to be given Foot traction rods should be lockable at various distances of abduction and should permit adduction also The table should be washable and rust and corriosion free 29 Mayo operation trolley Rectangular stainless steel tray mounted on 5cms castors height adjustable by side knob Product specifications 60 75cms L x40 55cms B x3 5 Depth with 80 130 to 140 cm Adjustable Height Material Stainless steel cure tray foot and tray holder made of square or rectangular stainless steel tube Description height can adjust from 80 130 to 140 cm cure tray can use alone for sterilizing with 4pcs 2inch castors 2pcs with brake cross wheels 30 Stainless steel operation instruments trolley Without bucket ring Length 770 cm X Width 470 cms X Height X 800 cms without bucket ring and handlegrip Material stainless steel anti corrosive The whole structure is made of stainless steel firm durable and beautiful Double layer shelf makes more convenience for carrying operation instruments Noiseless 4 castors create smooth and flexibl
31. successful tenderer after Page 10 the finalization of the tender enquiry c The Earnest Money of the successful tenderer would be returned to the tenderer after submission of PBG 30 Any failure or omission to carryout of the provisions of this supply by the supplier shall not give rise to any claim by supplier and purchaser one against the other if such failure or omission arise from an act of God which shall include all acts of natural calamities from civil strikes compliance with any status and or requisitions of the Government lockout and Strikes riots embargoes or from any political or other reasons beyond the suppliers control including war whether declared or not civil war or state of incarceration provided that notice of the occurrence of any event by either party to the other shall be within two weeks from the date of occurrence of such an event which could be attributed to force majeure 31 If at any time any question dispute or difference whatever shall arise between supplier and the institute Purchaser upon or in relation to or in connection with the agreement either of the parties may give to the other notice in writing of the existence of such a question dispute or difference and the same shall be referred to two arbitrators one to be nominated by the institute Purchaser and the other to be nominated by the supplier Such a notice of the existence of any question dispute or difference in connection with the agreement s
32. te sealed Cover I super scribed as Financial Bid Administrative Officer AIIMS Raipur Raipur Dear Sir Our quote for supplying the For Hospital Furniture at AIIMS Raipur will be as follows Per Unit Price S No ITEM S WITH SPECIFICATION QUANTITY Inclusive of all TAXES in Rs 1 Hospital bed with two section 35 2 Fowler Bed 80 3 Pediatric Bed 5 4 Orthopaedic Bed Fowler 5 5 Orthopaedic Bed S S Multi Function 3 6 Orthopaedic Bed with ABS Panels 2 7 ICU beds advance model with mattress having water proof cover _ 20 8 Bed side locker 160 9 Over bed table 40 10 Surgeons chair 5 11 Dressing trolley 20 12 M edicine trolley 15 13 Crash cart 10 14 IV stand 160 15 Patient examination table 30 16 Linen Fold Table 10 17 Sorting table utility table 10 18 Ward Screen Stainless Steel with Curtain 25 19 Platform foot steps single step 10 20 Platform foot step double step 10 21 SS swab rack 5 22 Emergency patient trolley 10 23 Stretcher trolley 40 24 Wheel Chairs 10 25 Wheel chair folding 10 26 Soiled linen trolley 10 27 Gynaecological examination table with stirrup 2 Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 5 Per Unit Price S No ITEM S WITH SPECIFICATION QUANTITY Inclusive of all TAXES in Rs 28 Watson Jones Fracture Table 1 29 M ayo ope
33. trolley 10 23 Stretcher trolley 40 24 Wheel Chairs 10 25 Wheel chair folding 10 26 Soiled linen trolley 10 27 Gynaecological examination table with stirrup 2 28 Watson Jones Fracture Table 1 29 M ayo operation trolley 8 Stainless steel operation instruments trolley Without bucket 30 ring 5 31 Stainless steel operation instruments trolley with bucket ring 10 32 Fan Shape Stainless Steel Operation Apparatus Trolley 4 33 Rolling shifter sliding pad to shift patient from OT table to trolley 5 34 Kick Bucket 10 Total EM D Rs 3 00 000 Rupees Three Lakhs Only Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 2 TENDER DOCUMENT For Hospital Furniture AIIMS Raipur TECHNICAL BID In separate sealed Cover I super scribed as Technical Bid 1 Name amp Address of the manufacturer and their authorised dealers distributors Agency with phone number email name and telephone mobile 2 Specify your firm company is a manufacturer authorised dealer distributor Agency 3 Name Address amp designation of the authorized person Sole proprietor partner Director 4 Have you previously supplied these items to any government private organization If yes attach the relevant poof Also provide an affidavit that you have not quoted the price higher then previously supplied any government institute 5 Please attach copy of last Return of Income Tax 6 Please attach balance sheet dul
34. y cassette holder underneath the back section amp should allow insertion of X Ray cassette from either side of the bed 3 4 Base frame amp support frame should be made up of Stainless steel for long life amp prevention from rusting 3 5 Dimensions a Height minimum 440 450mm without mattress maximum810 840 mm without mattress Buffer to Buffer 2160 2170mm x 1020 1030mm L x W Platform frame 2070 2080mm x 960 970mm L x W Mattress platform 1900 1920 mm x 865 870 mm L xW Extended length 150mm for mattress Back section 0 65 degrees Knee rest Section 0 30 degrees 3 6 Should have stepless pneumatic adjustment for Trendelenburg 17 25 approx anti trendelenburg 15 25 approx 3 7 Should have a manual quick release mechanism for back section adjustment during emergency situation 3 8 Split safety side rails IEC 60601 2 52 3 9 Should be equipped with large high grade synthetic castors diameter 125 150 mm with central braking and steering facility 3 10 Four section Mattress of the Bed should be made up of high density foam with 12 cm thickness PU foam and covered with PVC with Anti Microbial agent incorporated into all components that assists in Prohibiting growth of bacteria amp fungi and easy to clean 3 11 Mattress should be fully Radiolucent for ease in performing portable X Rays 3 12 Should have bumpers at all four corners and place for fixing accessories gw meangs 4 Accessories 4 1 User friendly h
35. y certified by Chartered Accountant for last three 3 years 7 PAN No Please attach copy 8 Service Tax Registration No Please attach copy 9 Acceptance of terms amp conditions attached Yes No Please sign each page of terms and conditions as token of acceptance and submit as part of tender document 10 Power of Attorney authorization for signing the bid documents 11 Please submit an undertaking that no case is pending with the police against the Proprietor firm partner or the Company Agency Indicate any convictions in the past against the Company firm partner Also submit that proprietor firm has never been black listed by any organization 12 Details of the DD Pay Order of bid security Detail of cost of Tender form Rs EMD 2000 ae No DD No ate Date Payable at ee Payable at Sign of bidder Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 3 Declaration by the Tenderer This is to certify that I We before signing this tender have read and fully understood all the terms and conditions contained herein and undertake myself ourselves to abide by them Encls 1 DD Pay Order No 2 Terms amp Conditions each page must be signed and sealed 3 Financial Bid Signature of Tenderer with seal Name Address a ee at Dale esne Ea Tender Enquiry No F No Admin Hosp_ Furniture 2013 2014 Page 4 To FINANCIAL BID In separa
Download Pdf Manuals
Related Search