ATB 31890-33111 Odyssey brakes groan.fm
Contents
1. includes brake pad replacement brake lathe Do not refinish the front discs off the B Replace one disc add vehicle because disc runout cannot be adequately C Replace two discs add eliminated by this method NOTE For information on brake disc refinishing Refinish the front brake discs and install new j CORRECTIVE ACTION reformulated brake pads Failed Part P N 45022 SHJ A00 H C 7752520 refer to the operating manual for the lathe and to Service Bulletin 00 088 Brake Disc Refinishing Defect Code 00504 Guidelines Symptom Code 04213 4 Remeasure the brake disc thickness Verify the disc Skill Level Repair Technician is within refinish limits Note the measurement on Out of warranty Any repair performed after warranty the back of the hard copy expiration may be eligible for goodwill consideration by 5 Install new front brake pads and new shims the District Parts and Service Manager or your Zone e Refer to page 19 14 of the service manual or Office You must request consideration and get a decision before starting work e Online enter keyword PAD and select Front Brake Pad Inspection and Replacement from the list 2006 American Honda Motor Co Inc All Rights Reserved ATB 31890 33111 0607 1 of 1 Skill Level CUSTOMER INFORMATION The information in this bulletin is intended for use only by skilled technicians who have the proper tools equipment R and training to correctly and safely maintain your2. HONDA Service Bulletin 06 024 Applies To 2005 Odyssey ALL July 22 2006 2006 Odyssey From VIN 5FNRL38 6B000001 thru 5FNRL38 6B106388 From VIN 5FNRL38 6B400001 thru 5FNRL38 6B443036 Front Brakes Groan at Low Speeds Supersedes 06 024 dated May 26 2006 to update the information marked by the black bars SYMPTOM REPAIR PROCEDURE The front brakes make a low pitched groan when 1 Remove the front brake pads and shims coming to a stop from low speeds e Refer to page 19 14 of the 2005 2006 Odyssey Service Manual or PROBABLE CAUSE e Online enter keyword PAD and select Front Brake Pad Inspection and Replacement from The brake pad material was improperly formulated the list 2 Measure the brake disc thickness e Refer to page 19 17 of the service manual or e Online enter keyword DISC and select Front Brake Disc Inspection from the list e Note the measurements on the back of the repair PARTS INFORMATION order hard copy Brake Pad Set P N 45022 SHJ A50 H C 8303083 If the brake discs are within the service limit go to step 3 e f one or both brake discs are outside the service WARRANTY CLAIM INFORMATION limit replace the disc s as needed When In warranty The normal warranty applies replacing discs you must refinish the new discs Go to step 3 or Description ia 3 Refinish both front brake discs with an on car brake 410820 Refinish both front brake discs lathe Use the approved Kwik Way or Snap on
3. vehicle These procedures should not be attempted by do it yourselfers and you should not assume this bulletin applies to your vehicle or that your vehicle has the condition described To determine whether this information applies contact an REPAIR authorized Honda automobile dealer
Download Pdf Manuals
Related Search