Molift AS
Contents
1. 20 Movement A Be careful during movement not to run into furni ture walls doors etc A Avoid deep pile carpets high thresholds uneven surfaces or other obstacles that may block the cas tors The lifter may become unstable if forced over such obstacles increasing the risk of tipping over The patient should not be standing straight up during movement this can be experi enced as uncomfortable The lifter shall not be used to lift or move us ers on Sloping surfaces The lifter shall only be used for movement over short distances It is not a replacement for wheelchair or similar Lowering e Lower the patient into sitting position at the de sired place If the patient is to be seated into a wheelchair AN please observe that the wheel brakes must be locked on the wheelchair when lowering but NOT on the lifter e Release ropes from locks and remove the sling E Rev G 09 2006 Accessories Molift Easy Raiser lifting strap Molift Easy Raiser Art no 3020003 Art no 3020000 Art no 3020002 Art no 3020004 Molift Easy Raiser lifting strap with support Molift Easy Raiser with support Art no 3019003 Size Art no 3020001 molift designed for life molift QUICK RAISER Lifting strap size guide The strap is adjustable Waist meas Recom Colour urement mended code weiahi min max J cm cm XS Light 20 30 kg 50 65 blue a e peu oD All lifting straps a2. designed for life Molift AS Ole Deviksvei 44 0668 OSLO Norway Teleph 47 40001004 Fax 47 40001008 www molift com info molift com E Rev G 09 2006 General advice This user manual contains important safety instruc tions and information regarding the use of the lifter Carefully read the manual before using the lifter in order to be familiar in the function and use of the lifter Explanation of symbols AN This symbol is used to point out instructions and information related to work place safety where injury may occur if the information is disregarded or ignored Follow these instruc tions be careful and attentive at all times This symbol indicates important information regarding the use of the equipment If not taken into consideration it may lead to dam age or functional defects to the lifter or other equipment This symbol indicates important and useful information If taken into consideration it will help the operator of the lifter to work ef ficiently It may help simplify routines and to explain complicated facts O Before using the patient lifter Before using a patient lifter the operator must be trained accordingly Practice lifting a colleague and be lifted by others It is important not only to know how to move another person using the lifter but also how it is to be lifted Try out and practice using all the relevant slings for the different types of lifter and movement you may en
3. the leg perpendicular to the footplate you should pay extra attention when lifting to avoid overstretching the knee joint A molift designed for life molift QUICK RAISER e Place the Molift Easy Raiser sling under the arms and around the back of the patient as far down as possible Connect the belt and tighten firmly Fasten the sling to the lifting arm by pulling the ropes firmly into the rope locks from the inside and out as shown in the illustration When lifting the patient the ropes will lock even tighter due to the weight of the patient The patient should grab and hold the handlebars of the lifting arm if pos sible O If the patient is large and heavy it is recom mended to lock the rope from the outside and in to increase the width of the ropes This will reduce any pinching effect to the patients chest Page 13 of 20 molitt QUICK RAISER e On QR2 the ropes is attached to the lifting arm bt pulling them firmly from above into the rope locks as shown on the illustration The ropes must be tightened firmly to avoid them sling to much when lifting the patient The rope will lock itself due to the weight of the patient but if sliding too much before locking it may cause an uneven lift and dis comfort for the patient A e Raise the patient carefully until the buttocks are clear from the seating Unlock the wheels on the lifter and move the patient to the next location Page 14 of
4. actly aligned with the edge of the chassis If the column stops before the arrow has reached the edge you will have to retract the molift designed for life molift QUICK RAISER column and try turning the motor spline head to align it with the connector at the base of the col umn Do not use force to press the column down When the column is in place release the column fixing bolt and let the plate with bolts slide into the corresponding groove on the chassis Tighten the bolts firmly using the tool found at the top of the column The QR2 column has a pin in the bottom to be fitted in the chassis e Slide the driving handle onto the top of the col umn by guiding the head of the fixing knob into the T groove of the column The handle shall be pointing upwards Tighten the knob firmly when the handle is in the desired position e Guide the wire of the hand control through the ring at the base of the drive handle and insert the contact into the chassis connector The hand con trol has a hook enabling it to hang on the handle e Attach the lifting arm QR2 Remove the security ring from the lifting arm Assemble the lifting arm by holding it ap prox parallel to the column and guide the hook of the arm onto the two bolts of the trolley The arm is now attached to the trolley Mount the se curity ring QR2 Place the lifting arm install the bolt and at tach with the screws Torque 28 Nm If the lifting arm appear
5. and suspension Lifting motor 12 V DC w worm gear Linear worm screw with trolley Leg motor 12 V DC linear actuator Weight total Incl battery approx 37 kg Battery 14 4 V NiCd 1 9 Ah or 14 4 V NiMH 2 2 Ah Molift PowerPac Number of lifts 75 kg 500 mm up down Ca 40 molift designed for life molift QUICK RAISER Lifting capacity max 160 kg Lifting height 850 mm Height legs Max 100 mm Measurements 1350 x 610 x 1250 mm LxWxH Measurements in illustrations below are in millime tres 779 1040 Page 7 of 20 molitt QUICK RAISER Technical data QR2 Material Aluminium lifting column and spreadable legs Steel chassis and suspension Lifting motor 12 V DC w worm gear Linear worm screw with trolley Leg motor 12 V DC linear actuator Weight total Incl battery approx 38 kg Battery 14 4 V NiCd 1 9 Ah or 14 4 V NiMH 2 2 Ah Molift PowerPac Number of lifts 75 kg 500 mm up down Ca 40 1150 1250 Page 8 of 20 Lifting capacity max 200 kg Lifting height 820 mm Height legs Max 100 mm Measurements 1350 x 610 x 1250 mm LxWxH Measurements in illustrations below are in millime tres 720 1750 1030 E Rev G 09 2006 Assembly disassembly To be able to operate the lift the operator must have good knowledge of the lift including assembly dis assembly and preparation before use Assembly and use of ch
6. arger The battery charger shall be mounted on a vertical wall surface close to a power outlet The charger shall be connected to the power outlet at all times Molift AS tests and charges all batteries be fore packing and shipment However all bat teries must be charged before use Unpacking e The lifter comes in a cardboard box Verify that the box has no apparent damage If damaged check the contents and contact your dealer for as sistance if components are damaged e The box contains chassis lifting column knee support lifting arm drive handle hand control battery battery charger and documentation Make sure that the different parts have the same lifting capacity If in doubt the part with the lowest capacity is the ruling Assembly of lifter The battery must not be in the battery holder on the column during assembly Assemble the kneepad bracket first by sliding it onto the lifting column In order to do that you must first remove the column fixing bolts and plate Guide the knee support bracket onto the column with the head of the fixing knob into the T groove on the column Slide the bracket up the column to the desired position and tighten the knob Retrieve the column fixing bolts and plate and slide it into the T groove at the base of the col umn and approx 25mm up Tighten one of the screws slightly to fix the plate Insert the col umn into the chassis the arrow on the column side shall be ex
7. by itself legs move by them selves The lifting arm does not move legs does not move E Rev G 09 2006 Service yearly maintenance If you are not able to solve the fault or problems by yourself using this manual please contact local au thorised service representative If you do not know whom to contact locally please contact your dealer or Molift AS to get help Yearly service is done according to procedures in the service manual included with the lifter The owner is responsible to ensure proper logging and written verification performed by authorised service partner The service manual has dedicated pages for logging and signature molift designed for life Notes molift QUICK RAISER Page 17 of 20 molitt QUICK RAISER molift WARRANTY Molift AS hereby declares that this product ts awarded up to 5 five year extended manufacturer s warranty It is very important to our customers and to Molift AS that our products meet all relevant quality and sa fety requirements according to both customer and authority demands Molift AS develops and manufac tures products with high standards of safety quality and design and we are continuously in a process of keeping our products in position among the market leaders To make our products quality level more explicit Molift AS have introduced extended warranty time on all of our patient lifters A 5 five year warranty against defects which m
8. centre of the chas sis The column is made of an aluminium profile with a trolley The trolley runs along a worm screw powered by an electric motor inside the chassis A driving handle is placed near the top of the column and the battery holder is situated below The knee pad bracket is also fastened to the column and is ad justable The lifting arm is connected to the trolley and has two rope locks to fasten the sling ropes Safety devices The lifter has an overload sensor preventing the lifter to be operated with more the maximum load If the load exceeds the maximum limit the lifter will stop the movement Drive handle Battery holder Trolley Emergency stop Chassis Page 5 of 20 molift QUICK RAISER Technical data QR1 Material Aluminium lifting column Steel chassis and suspension Lifting motor 12 V DC w worm gear Linear worm screw with trolley Weight total Incl battery 30 kg Battery 14 4 V NiCd 1 9 Ah or 14 4 V NiMH 2 2 Ah Molift PowerPac Number of lifts 75 kg 500 mm up down Ca 40 Page 6 of 20 1070 Lifting capacity max 160 kg Lifting height along column 850 mm Height legs Max 100 mm Measurements 1070 x 610 x 1280 mm LxWxH Measurements in illustrations below are in millime tres 430 196 1010 lt P Cc ON ON E Rev G 09 2006 1745 Technical data QR2 Material Aluminium lifting column and spreadable legs Steel chassis
9. counter Before lifting a per son you should explain the procedure When using the lifter it s also important to use the correct sling and accessories according to e type of disability e size e weight e type of movement molift designed for life molift QUICK RAISER Responsibility Please read these operating instructions carefully before putting the product into operation We as sume no liability for damage or malfunctions re sulting from failure to comply with the instruc tions Warranty claims must be made immediately on detecting the defect Remember to quote the se rial number Consumable parts are not subject to the warranty All technical information data and instructions for operation contained in these operating instructions were up to date at time of print and are compiled on the basis of our experience and to the best of our knowledge We reserve the right to incorporate tech nical modifications within the scope of further de velopment of the product described in this manual No claims can be derived from the information 1l lustrations or descriptions contained in these in structions We assume no liability for any damage or malfunction caused by operating errors non com pliance with these operating instructions or inappro priate maintenance We expressly point out that only genuine Molift AS spare parts and accessories ap proved by us may be used For safety reasons the fitting and use
10. d QR2 pasinina 12 Emergency stop and lowering 0 12 USING Iing SINGS gssexesciscnccnenconsiesrsnpeeeson 12 Use of spreadable legs QR2 and QR2 12 Lift and MOVEMEN cccceeceeeceseeeeeeeeeeeees 12 EAO cstatecoencertiocent arse needs S 12 Movement cceceeceeeeceeeeteeeeseeeeeeeaeeeees 14 OW CUI eats ort tere detocerteraesnctieeacentecocts 14 Page 2 of 20 Accessories 00ne nnnnnnnnaaeaeeeennenenernnrrrnnnn 15 Molift Easy Raiser lifting strap 15 Molift Easy Raiser lifting strap with support 15 Lifting strap size guide cceceeeeeeeeeeees 15 Maintenance cccceeeessscseceeeeeeeeeeeees 16 Daily MAINTENANCE 0 cccsccccteeeeseeeeeeeeeens 16 Monthly maintenance 0 cccseseeeeeeeeneeeees 16 Faul TH GIAG er E 16 Service yearly maintenance 17 NOOO i i taessemeess 17 IMPORTANT The patient lifter is only meant to be used by qualified personnel The manual shall not be handed over or made available to any unauthorised third party wit hout a prior written consent from Molift AS Exciting laws conventions and agreements protects all documents No extract of this do cumentation can be reproduced used or trans ferred without prior written consent from Molift AS Violation of these regulations may lead to judicial repercussions and economic responsi bility Industrial rights are reserved amp molitt
11. damage to the equipment The lifter must be taken out of service immediately or not returned to serv ice if faults and or irregularities that may have in fluence on the safety are discovered Safety devices and equipment must not be re moved disabled or in any other way altered A Molitt QUICK RAISER shall only be used when all safety devices and equipment is in place and fully operational Com The lifter is designed for use in room tem perature 10 to 40 C This should be taken into consideration when transporting the lifter and therefore keeping it in a tem perate part of the vehicle Alternatively the lifter must rest in a temperate room until the equipment has achieved proper working tem perature Use under moist or wet conditions The lifter is splash proof If used in conjunction with shower equipment a protective plastic bag must be used to cover the operator panel Avoid direct show ering of the lifter Permanent use in shower rooms 1s not recommended and can over time lead to corro sion of details on the lifter If used in shower rooms it is mandatory to prevent excessive use of water as well as increasing service and maintenance Page 4 of 20 If defects or faults occur The lifter must be switched off immediately if one of the following conditions occur e damage to electrical devices or cables or damage to parts of electrical insulation e damage or failure on safety devices If the expected movem
12. ent does not start when the corresponding button is pressed please consult the fault finding table in the mainte nance chapter to locate the fault O Injury to personnel or equipment may occur 1f Molift QUICK RAISER is used in an incorrect man ner and 1f e covers are removed by unauthorised personnel e used incorrectly e insufficient maintenance e load exceeds maximum limit The maximum load stated in this manual and on the lifter is the maximum load e unauthorised repair of electrical devices or cables Lift and transfer AN The patient lifter may tip over if used incor rectly Ignorance of warnings and instruc tions may lead to personnel injury Read in structions carefully before attempting to lift anyone Stand to the side of the user when lifting Ensure that arms and legs are clear of the lift chair bed etc Try to maintain eye contact with the user this will help the user feel safe and comfortable A A Pay close attention to your actions Ensure that both ropes of the sling are securely fas tened to avoid the user slipping or falling Keep fingers arms or similar away from trol ley during use Danger of clamping between knee support and trolley Molift slings shall ONLY be used to lift per sons NEVER use the sling to lift and or move objects of any kind E Rev G 09 2006 About the product Molitt QUICK RAISER is designed to cover the need for lift and transfer of patients who are to so
13. g checkpoints for maintenance and safety control The extended warranty is valid only with signature and or stamp by authorised service partner including service partner s signed label with authorisation no on product Normal warranty is 12 months This still applies for slings hand control batteries and paint Gj vik 28 08 2006 Molift AS F Geir Olav Farstad Managing Director Page 1 8 of 20 E Rev G 09 2006 molitt QUICK RAISER molift DECLARATION OF CONFORMITY CE Molift AS Ole Deviksvei 44 0668 OSLO NORWAY Telephone 47 40 00 10 04 hereby declare that Molift QUICK RAISER patient lifter and that the accessoires used only together with this product Year 2006 are in conformity with e The Council Directive concerning medical devices 93 42 E F and according to this classified as medical equipment class 1 Molift QUICK RAISER is manufactured in conformity with the following national or international standards that also might implement a harmonised standard e 15010535 Hoists for the transfer of disabled persons Requirements and test methods e ISO 14971 Medical equipment Risik analysis Notified fody Hjelpemiddelinstituttet NEMKO AS Gregersensve Gaustadalleen 30 DK 2630 Taastrup N 0314 OSLO Denmark Norway Tel 45 43993322 Tel 47 22960342 Title Managing Director Name Geir Olav Farstad Company Molift AS AREP 28 08 2006 LOMB Va Ale Z gna Ti en P 19 of 20
14. ight be traced back to ma nufacturing is offered The extended warranty period is offered under the condition that the regulations described here are completely fulfilled and that the product has been used according to its intentions The extended warranty is valid for a period of 5 five years starting at the date of purchase limited to 3 months after the production year week The extended warranty is offered in addition to the local sale of goods act It is mandatory that the product undergoes safety control and maintenance performed by an authorised service partner at least every 12 months according to this service manual made by Molift AS e Yearly maintenance and safety control must be performed within a maximum interval of 12 months and for the first time maximum 12 months after date of purchase or maximum 15 months after year week of production e Molift AS will cover the cost of spare parts and labour in the warranty period for all necessary re pairs caused by product defects that can be traced back to manufacturing The repair must be perfor med by an authorised service partner or at Molift AS own workshop during the warranty period e All warranty repairs must be approved by your Molift supplier or by Molift AS prior to the repair e The owner of the product is responsible for establishing the service agreement and the cost for the annual safety control and maintenance e The service manual has one page for every 12 months containin
15. me extent capable to actively participate in the process The lifter has an exceptional design and the shape of the lifter and geometry of the lifting movement im itates the natural pattern of movement of a person The lifter is only intended for lift and transfer to and from a sitting position The lifter is delivered in three variants QUICK RAISER QR with fixed legs and QUICK RAIS ER 2 QR2 and QUICK RAISER 2 QR2 with spreadable legs making the lifter more flexible when used around different chairs toilets etc In ad dition QR2 has lifting capacity of 200 kg QR and QR2 have lifting capacaties of 160 kg The kneepads are adjustable giving comfortable support for the knees A strap is placed around the legs fixing the knees gently to the pads to ensure stability and comfort The pads are self adjusting and can be removed for maintenance The lifting arm has handles with rope locks The lift ing arm can be folded towards the column when pre paring a lift this makes the lifter less intimidating and prevents collisions between the lifting arm and patient Lifting column Lifting arm ee Knee support w 8 pads Footplate molift designed for life molift QUICK RAISER Main components The chassis is the main part of the QUICK RAISER consisting of a steel frame casters footplates and emergency stop The front legs are fixed on QR and spreadable on QR2 and QR2 The lifting column is fixed at the
16. mn is not properly in place in the chassis check if the col umn is correctly placed in the chassis and or tighten bolts Fault on hand control ex change with alterative control from other lifter and or new hand control One of the relays electronics has failed exchange the con trol unit relays contact your local service representative Short circuit between the hand control and lifter clean the connectors of the hand control and chassis with spir its to remove grease and dirt The hand control has failed exchange hand control con tact your local service repre sentative Relays electronics malfunc tions exchange electron ics relays contact your local service representative Discharged battery ex change battery with another or charge battery Bad or wobbly connection from lifting column to chas sis clean contacts in column base and inside chassis ad just and tighten column bolts Emergency stop activated turn clock wise to reset Hand control disconnected reconnect hand control The hand control has failed exchange hand control con tact your local service repre sentative Relays electronics malfunc tions exchange electron ics relays contact your local service representative Motor has failed exchange motor contact your local service representative Lifter only moves one way up or down legs only moves one way in or out The lifter moves up and or down
17. molift QUICK RAISER CE a patient lifter from OPERATOR MANUAL molift designed for life molitt QUICK RAISER Contents General Advice c cc ccceeceeceeesesneeeeeens 3 Explanation Of symbols n s 3 Before using the patient lifter cccc cccee 3 Responsibility seicuiiume sc sctacaraciaiuniuiesisenatansehess 3 Safety precautions cc eeceeeeeees 4 CECT agi tonsa A A E E 4 Use under moist or wet conditions 4 If defects or faultS OCCUL cccccceeeeeeeeeeees 4 Lift and transfet aenor 4 About the product cc ceeeeeeee 5 Main COMPONENMS c0cccceececseeeeseeeeeaeeeenaes 5 Safety OVICES ccccccsccececseseececsaaeeeeesaaaeeens 5 Technical data QR1 ce eceeeeeeeteee 6 Technical data QR2 ceceeeeeeseeee 7 Technical data QR2 0 0 ees 8 Assembly disassembly c eee 9 Assembly and use Of Charel 0 ccc0sc0ee 9 COACHING iieo oetecncsvacenaainntee ennai seauecssies 9 Assembly Of liftet 9 Checklist before USC cccceeeeeeeeeeeeeees 10 DISaS Se MDI esa E 10 Operation ccc ccccsseeeessseeeeeesseeeeees 11 Battery CALC ccccccccccccceeccceseeceueeeeeeeseeeeenees 11 Battery CAPACILY 1 cccsecccceseecneeeeneeesneeeeeaes 11 Battery types and chargefs cccccceseeeeeees 11 Operation of hand CONrOI cccccccceeeeees 12 E a T EE E E 12 QRZ an
18. molift eae te designed for life At times with increasing demand for efficiency in the healthcare sector and growing focus on patients needs it is easy to neglect the needs of the carer The need to give better help and caring avoiding heavy lifting situations avoiding putting your own back at risk without being completely exhausted after work and still have some sur plus energy when the workday is over This is the insight that drives us at Molift The company was started 20 years ago by a man who through his own experience saw the need for lifting and moving patients in an effective and comfortable way for both patient and carer We have since then delivered products that compliment the natural movements of the body that is both simple and intuitive to use Products designed to give the patient a better life in addition to providing the carer with real support and optimum work enjoyment This is the true meaning of Molift designed for life Molift AS Ole Deviksvei 44 N 0668 OSLO Norway Telephone 47 4000 1004 ae ae ee ee ee ee ee ee Fax 47 4000 1008 See Se eee S amp S info molift com UCo Yili U IOI Tic
19. ning it clockwise until it pops out will reset the emergency button It is possible to perform a emergency lowering if the lifter should malfunction This is done manually by turning the worm screw using a Umbraco tool Move the lifter to a suitable place to lower the per son Break the yellow seal on the top of the column and insert the tool Turn counter clockwise to lower the trolley will move slowly down Contact a service partner if the cause of the stop or malfunction is unknown or if a fault is discovered Using lifting slings The Easy lifting slings are as the name indicates easy to use They are washable at 80 C and auto clave at 85 C for 30 minutes AN It is recommended to use Molift Easy slings Slings from other manufacturers may have other specifications leading to unexpected instability and possible injury to personnel Torn cut frayed or broken slings can fail resulting in serious injury to the user Use slings in good condition only Destroy and discard old unusable slings A Page 12 of 20 Use of spreadable legs QR2 and QR2 It is possible to adjust the width of the legs at the front of the QR2 and QR2 this makes it easier to access lifting situations around chairs toilets etc The adjustment of the legs are done with the hand control and does not affect the stability of the lifter Lift and movement Lifting e Lower the lifting arm to the lowest position e Alternatively adju
20. of spare parts or accessories which have not been approved and unauthorised modifi cation or conversion of the product are not permit ted Molift AS will accept no liability for damages resulting from such acts With the exclusion of product liability Molift AS is liable for faults or omissions on its part within the scope of the warranty obligations stated in the purchase contract Claims for damages are exclud ed irrespective of the legal reason from which such claims are derived Only documentation belonging to the actual equipment is valid Any failure to comply with the safety regulations and precautionary measures stated in these operat ing instructions renders the declaration of conform ity supplied with the system in accordance with Council Directive 93 42 EEC concerning medical devices invalid Page 3 of 20 molitt QUICK RAISER Safety precautions General This operator manual is valid for all types of QUICK RAISER Use and operation of the variants are ba sically similar and any major difference is clearly noted in the text Before putting a Molift QUICK RAISER into oper ation the operator must ensure that the lifter and ac cessories are in good working order especially with regards to safety All instruction and information in this manual re garding safety and general precautions must be read understood and followed carefully Any disregard to these precautions may result in personnel injury or
21. re approved for 200 kg Recommended weight is only mentioned as a guide to choose the correct size Page 15 of 20 molitt QUICK RAISER Maintenance Daily maintenance Com Detergents must be pH neutral Do not use solvents or strong liquids this may damage surfaces on the lifter For disinfection when needed use isopropyl alcohol Avoid abra sive cleaning products Clean surfaces with a damp cloth using an appropri ate detergent Monthly maintenance e Remove hair and pile from the castors and verify that the castors rotates without abnormal friction e Verify that the contacts of the hand control and charger is firmly in place e Clean contact and hand control with spirit or similar to remove grease and dirt e Verify that the cables for the hand control actua tor and charger are intact e Run the lifter up and down to verify that it runs normally and without any abnormal noise Fault finding If you have access to more than one lifter it may be helpful to change parts across lifters to help identify any faults For instance if you suspect the fault to be inside the column exchange the column with at functional one from the other lifter to see if the prob lem is fixed Across you will find a table with fault finding proce dures to identify and correct faults on the lifter Page 16 of 20 Symptom Possible cause action Lifting column is Locking bolts are not prop wobbly erly secured or lifting colu
22. rtant that fully charged batteries are not charged without being used O The chargers have different ways of showing the status of the charging process e NiCd charger The charger has a LED indicating the status of the battery as described below Output No battery Initalization 10 sec 100 mA T It is recommended that NiCd batteries are placed in the charger when not in use Reg ularly each 10 times the battery should be used until the charging indicator on the lifter glows before charging the battery e NiMH charger The charger has two diodes a green and a red The red diode will glow as soon as the battery is placed in the charging unit and maximum charg ing current is applied The green diode will start to glow when the battery is fully charged and the charger switches to maintenance charging If the charger can t detect fully charged battery after about 8 hours a built in timer will force the charger to maintenance mode to avoid over charging Page 11 of 20 molitt QUICK RAISER Operation of hand control QR The hand control has two buttons up and down QR2 and QR2 The hand control has four buttons two buttons for movement up and down and two buttons for move ment of the legs in and out Emergency stop and lowering All of the Molift patient lifts are equipped with emergency stop and lowering The emergency stop will cut the power to the actuator and is situated on the chassis Tur
23. s verify that the charg er is suitable for the local power system voltage Place the battery in the holder according to the ar row markings Press the battery gently down to en sure good contact between battery and charger Battery capacity A LED Light Emitting Diode is situated on the bat tery holder If the voltage of the battery falls below a certain level the diode will change to orange in dicating the need for charging There is still enough capacity to perform 3 5 lift cycles 75 kg at this point If the battery is discharged during a working ses sion it s recommended to have two batteries so a second charged battery is available when needed If the battery is discharged during a lift it is always enough power to lower the user down again oO Battery types and chargers Molift PowerPac can be used with two kinds of bat teries NiCd and NiMH AN The battery and charger types must not be mixed Use of wrong charger to battery type may cause overheating and damage to the powerpac Be aware that these two batteries have differ ent chargers Follow the instructions printed on the battery molift designed for life molift QUICK RAISER It s not possible to overcharge the batteries but to ensure optimal performance through out the lifetime of the battery we recommend that the battery is allowed to rest for a cou ple of minutes after charging to cool down before use It is also impo
24. s wobbly in the trolley try tightening the bolts on each side of the trolley to reduce the gap A e Place the battery in the battery holder with the connectors facing down Run each function of the lifter a couple of times without load to verify proper function Be careful not to put fingers or similar under the lifting arm between arm and trolley Dan ger of personnel injury Molift AS tests all lifters with and without load before shipment The control is an extra precaution to uncover any shipment damage and or incorrect assembly Page 9 of 20 mou QUICK RAISER Checklist before use Verify that the lifting arm is properly fastened to the trolley Verify that the lifting column is properly placed into the chassis arrow shall be exactly aligned with the edge of the chassis Verify that the column is properly fastened with bolts tightened Disassembly Remove the lifting arm Remove the knee support Loosen the column fixing bolts and lift out the column Alternatively remove the drive handle and knee support bracket Page 10 of 20 E Rev G 09 2006 Operation Battery care Molift PowerPac system is a battery with a 14 4 V cell unit that is placed in the battery holder on the lift A charger is also supplied to charge the battery whenever needed This battery system is the same on all of Molift s mobile lifts The power cable of the charger should be connected to the power outlet at all time
25. st the legs of the QR2 to adapt to the lifting situation O To perform a comfortable lift for the patient it is recommended that the patient is sitting in a normal upright position with near 90 in ankles knees and hips torso It is also recom mended that the patient is wearing suitable shoes or socks with good friction towards the floor If the patient is sitting in a wheelchair it is necessary to put on the wheel chair brakes It s also recommended to lock the wheels of the QR when performing the lift Patients with an extremely high or displaced centre of gravity i e lameness on one side of the body or high wieght on the upper body may cause the lifter to tip over Such patients should be lifted in a passive lifter i e Molift Partner or Molift Smart and not with a semi active lifter as Quick Raiser E Rev G 09 2006 e Move the QR in front of the patient and place it in such a way that the patient can place the feet on the footplate on the chassis If necessary help the patient placing the feet correctly w The distance from the front edge of the lit er to the kneepads increases when they are moved upwards The distance X is minimum 15 cm og maximum 29 cm on QR QR2 and QR2 has a minimum distance on 14 cm og maximum distance on 28 cm O e Adjust the height of the kneepads so that the top of the pads are approx two fingerwidhts under the kneecap If it proves to be impossible to place
Download Pdf Manuals
Related Search