Technical Service Guide - Affordable Appliance Parts
Contents
1. 30 gt 11 Installation Doors Freezer Door 1 Install 2 door mounting screws on the freezer The swing direction of the fresh food door and the compartment door freezer door can be reversed on all models except Stainless steel 2 Insert the door handle onto the door mount Stainless steel models must be ordered as left or screws and pull the handle firmly to the right door swing Door Handles Removal and Replacement Fresh Food Door 1 Lift the fresh food compartment door handle firmly upward and off of the 2 door mounting SCrews 2 Reverse the above procedure to reinstall Note The door handle can be installed incorrectly Make sure the handle is curved upward and is locked in place A properly installed handle will be centered on the door Note The door handle can be installed incorrectly Make sure the curved side of the handle is toward the outside edge of the door Troubleshooting Tips Handle Installation Problem What To Do Possible Causes Handle too hard to Mounting bolts too tight Remove the handle Loosen the mounting bolts install Handle requires excessive force to install Loose handle Handle makes rattling noise at attachment Defective mounting bracket or bolts Loose mounting bolts Freezer handle is installed backwards Fresh Food handle is mounted upside down or incorrectly relative to t2. ee 18 Control Features 8 20 i eq 2 NNI eee 19 Boo sn nt sua 4 Were die MN a 17 DOO I ANGE ee a 4 Fl ciroriie erem iol ANNE Uu uu uuu ee ee ee 8 OIT TOTEM 13 Evaporator NS 13 Evaporator Thermostat 14 Freezer Drawer and Slides ee 16 Fresh Food and Freezer Thermistors 12 Fresh Food and Freezer Light Thermostats 15 Icemaker Ready Model8s U Ia ade ae yet ease dynes 12 WATE Par S 24 nee E 4 DO 10 Knob Encoder COMO Panel LLULLU ernennen 8 lets ae UU t 7 SCHE 22 OI l _____ __ _ 20 J OD YU s 6 J lt ee m 18 VV fr yu
3. Water Filter On ice maker models the water filter is located in the upper right corner of the fresh food compartment The water filter should be changed every 6 months To access the water filter press the tab on the front of the water filter cover and allow the cover to drop down Water Filter Part GSWF Turn the water filter counterclockwise to remove and clockwise to install Remove Install Note If a new filter is not available a filter bypass must be installed to supply unfiltered water to the icemaker Filter bypass part WRO2X11613 nodu Icemaker Ready Models The accessory icemaker can be purchased through parts part IM6 or as a sales accessory part IM4A through a dealer The icemaker must be installed with the fill tube shipped with the refrigerator The slot in the fill tube must be on top of the tube The water fill tube is packaged with the use and care manual in a plastic bag in the vegetable drawer The fill tube part number is WRO2X11712 Fresh Food and Freezer Thermistors Thermistor Values Temperature Degrees F Temperature Degrees C The fresh food thermistor is located on the ceiling of the fresh food compartment behind the light assembly The freezer thermistor is located on the rear of the right hand wall in the freezer section Note Fresh food and freezer thermistors are removed in the same manner To remove the thermistor co
4. The nomenclature plate is located on the upper left wall of the fresh food compartment Mini Manual Behind Base Grille Control Features Electronic Control Panel dp buds ee ae ee j The temperature controls are preset in the factory at 37 F for the refrigerator compartment and F for the freezer compartment Allow 24 hours for the temperature to stabilize to the preset recommended settings The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer The actual temperature may vary slightly from the SET temperature based on usage and operating environment Changing the Temperature To change the temperature press and release the WARMER or COLDER pad The SET light will come on and the display will show the set temperature To change the temperature tap either the WARMER or COLDER pad until the desired temperature 1s displayed Refrigerator temperatures can be adjusted between 34 F and 47 F and the freezer temperatures can be adjusted between 6 F and 8 F Once the desired temperature has been set the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds Several adjustments may be required Knob Encoder Control Panel Each time you adjust controls allow 24 hours for the refrigerator to reach the temperature you have set To turn the cooling
5. 4 1 MOTHERBOARD 20 Freezer Light ICEMAKER FZ DOOR SWITCH BL BL YL y o l gt RD E WATER VALVE jo GNIYL J7 DOOR OPEN 7 FZ LIGHT FZ LIGHT NEUTRAL 9 THERMODISK BL MOTHERBOARD BNIYL POWER J13 BL BL N YL L Fresh Food Light J7 jo DOOR OPEN 6 FF LIGHTS FF LIGHT 2 FF DOOR SWITCH Pee Bi LINE J11 MOTHERBOARD AC POWER YLil YL L Compressor COMPRESSOR BK BK OVERLOAD RELAY CAPACITOR AC LINE 11 M MOTHERBOARD Defrost Heater EVAP THERMODISK DEF HEATER AC POWER MOTHERBOARD 97 Drawer Models CIRCUIT DIAGRAM DRAWER 20 22 CUFT DC PART MOTHERBOARD TEST JACK BN YL TEMP RD BD CONTROL RD J4 BN BN DEF DAMPER RD L THERMISTORS BN RD PR BL 4 EVAP 1 EVAP RPM AC PART EVAP THERMODISK DEF HEATER BN AAA ja 5 BL COMPRESSOR BK BL BL gt PK RELAY CAPACITOR BK OVERLOAD GNYL ICEMAKER FZ DOOR SWITCH BL BL fo FZ LIGHT FZ LIGHT THERMODISK BULB T zum FF LIGHT 2 FF LIGHTS THERMODISK FF DOOR SWITCH BL BL J13 BL N AC POWER YL I YL L LEGEND BK BLACK BN BROWN RD RED BO BRIGHT ORANGE BL BLUE GY GREY GN GREEN YL YELLOW WH WHITE PR PURPLE SB SKY BLUE PK PINK 2 _ Door Models CIRCUIT DIAGRAM SWING 20 22 C
6. 70 F Electrical Rating 115V AC 60 2 1 5 Maximum Current 0 5 mA Maximum Ground Path Resistance 0 14 Ohms Energy Consumption 507 kWh yr for 20 cu ft models Energy Consumption 520 kWh yr for 22 cu ft models NO LOAD PERFORMANCE Control Position 5 5 And Ambient of 90 F Fresh Food een 32 42 Frozen Food Fasern 5 5 Percent Running 45 65 REFRIGERATION SYSTEM Minimum Compressor Capacity Vacuum 22 in Minimum Equalized Pressure P kha tun 38 PSIG rH 49 PSIG Refrigerant R 134 4 06 oz Compressor 690 BTU hr INSTALLATION Clearance must be provided attop sides and rear of the refrigerator for air circulation AT TOR ren 1 inch SIDES 0 125 inch AT REAR m 1 inch Airflow Cabinet Interior The evaporator fan forces air through the evaporator into the freezer compartment Air from the evaporator is also forced through the electronic damper to the top of the air tunnel through the fresh food compartment and returns to the evaporator The fresh food compartment receives chilled air through an electronic damper at the bottom rear of the fresh fo
7. SHELF 006 WR71X10565 ASSEMBLY FOLDING WR72X10151 HOLDER SHELF R L WR02X11682 RAIL SUPPORT L WR02X11681 RAIL SUPPORT R 603 WROOX10114 DAMPERASSY 620 WR50X10044 THERMOSTAT BI METAL WR71X10564 SHELF ASSEMBLY R 5 5 5 WR71X10541 HOLDER SHELF C 6 62 30 35 36 37 03 04 05 22 24 27 36 03 0 22 28 PDS22AMBPAWW Shown VIEW CATALOG NUMBER NUMBER DESCRIPTION QUANTITY DRIER FAN CONDENSER ASS Y 820 4 821 WR62X10000 CAPACITOR 11 822 WR17X11607 FILTERASSEMBLYHEAD 821 WR62X0079 CAPACITOR 11 828 WR57X10049 WATER VALVE 1 824 WRO2X11712 TUBEINJECT 1 ____825 WR02X11711 1 828 WR57X10033 WATER VALVE 11 826 WR50X10042 DEFROST HEATER 827 __ WRO2X11710 HOLDER 2065 828 WRO2X11700 24 829 WRO2X11708 COVER TUBE 1 ___830 WRO02X11713 COVER FILTER LOWER 1 832 WR02X11714_ COVER FILTER UPPER 1 ___833 __ WATERFILTER CATRIDG 1 1730 WR23X10300 POWERCORD 4 623 ___ WR02X11699 SOCKET ASSEMBLY LAMP F 1 624 __ WR02X11700 SOCKET ASSEMBLY LAMP R 4 625 WR50X10050 636 __ WR23X10341 SWITCHLIGHTFZ 1 ___637 WR23X10342 SWITCHLIGHTFF 14 638 ___ WR02Xx11661 COVERLAMPFF 639 WR02X11658 COVERLAMPFZ 714 WR30X10008 0
8. RTV102 silicone sealant to seal the end of the connector from moisture AA Fresh Food and Freezer Light Note To gain better access to the thermostat pull Thermostats the housing down until there is enough room to remove the thermostat Fresh Food Light Thermostat The fresh food light thermostat interrupts power to the fresh food lights when the temperature reaches 175 F Power is restored when the thermostat temperature cools to 155 F The thermostat is located on the back of the fresh food light housing To access the thermostat remove the control panel see Control Panel The thermostat is held in place by 2 screws When replacing the thermostat cut the thermostat wires and splice the new thermostat using bell connectors as shown Always use RTV102 silicone sealant to seal the end of the connector from moisture Freezer Light Thermostat The freezer flight thermostat interrupts power to the freezer lights when the temperature of the disk reaches 175 F Power is restored when the thermostat temperature cools to 155 F The thermostat is located behind the freezer light housing To access the thermostat remove the freezer light cover and housing The housing is held in place by 5 screws k a 3 gi S mes i 1 11 16 Freezer Drawer and Slides 5 Set drawer non scratching surface Removal and Replacement 6 Remove the middle basket top
9. basket ice tray shelf and ice bin 1 Open the freezer drawer until it stops 7 The center rail assembly is held in place by a 2 he bottom basket rests on a frame inside the molded channel in the freezer ceiling and freezer drawer To remove it lift the basket notches in the metal support rails Remove the from the back and slide it toward the freezer center rail assembly by pressing down on the compartment metal support rails while rotating the bottom edge of the center rail assembly cow Center Rail Assembly 3 Remove the single Phillips head screw on each side of the rail Note Do not remove the hex head screws from the rail assemblies 8 To remove the metal support rails press the tabs on the plastic support housing DO NOT remove hex head screws 4 The tabs on the side of the drawer rails fit into the front slots of the guide rails Lift the drawer by the handle to separate the drawer rails from the guide rails 9 Remove the 3 Phillips screws that hold the plastic support housing in place 10 Pull the front edge of the plastic support Freezer Drawer Shim housing away from the side wall Pull the If the d t d th ker housing forward to disengage the rear tabs __ _ _ u is not damaged the door alignment can be Note The plastic housing may be tight against adjusted the side wall and the tabs may be foamed in ae place Some force be required to remove it
10. come out as one unit silicone sealant to seal the end of the connector from moisture Use a new tie strap to secure the thermistor to the evaporator tubing Shown with Back Panel Removed zuo Evaporator Thermostat The defrost heater is controlled by the evaporator thermistor and normally turns off at 70 F If the evaporator thermistor fails the evaporator thermostat will turn off the defrost heater at 140 F and will reset at 110 F The evaporator thermostat is located on the top left side of the evaporator behind the back panel of the freezer compartment To access the thermostat remove the drawers shelves and icemaker if installed from the freezer compartment Remove the back panel Shown with Back Panel Removed The thermostat is held in place by a spring tab To remove it squeeze the tab Maca us Thermostat ABE j i Note The resistance of the thermostat and defrost heater can be taken by removing the access panel located in the upper left section of the evaporator cover Remove the screw and pull the cover forward to expose the two wire connector Unplug the connector and read the resistance between the two terminals Since the thermostat and heater are in series the reading should be approximately 32 Q When replacing the thermostat cut the thermostat wires and splice the new thermostat using bell connectors as shown Always use
11. peeve ie nolan connector to the drawer front Using the necessary number of stainless steel washers shim the drawer to provide the correct alignment 11 To remove the guide rails from the plastic support housing lift the tab on the back side of the housing with a small flathead screwdriver Door Gaskets The door gaskets are fitted tightly into the door channel They should not be removed unless they need to be replaced Note When replacing a gasket a wide blade screw driver may be necessary to remove the gasket 47 Troubleshooting 1 Enter the diagnostic mode by pressing both the freezer temperature COLDER and WARMER A diagnostic aid can be assembled which consists pads and the refrigerator temperature COLDER of a control board membrane and wiring harness and warmer pads simultaneously en be ning Note All four pads must be held for approximately 2 3 seconds Blinking O s in both displays indicate The control diagnostics allow the technician to the refrigerator has entered the test mode functionally test individual components to aid in troubleshooting Control Diagnostics On the electronic bottom mount models the diagnostics are performed by removing the existing temperature control board and plugging in the diagnostic aid or by accessing the main board on the back of the refrigerator and plugging into the J4 connector 3 Press and release any pad other t
12. system off tap the WARMER pad for either the refrigerator or the freezer until the display shows OFF To turn the unit back on press the COLDER pad for either the refrigerator or freezer The SET light will illuminate on the side you selected Then press the COLDER pad again on the side where the SET light is illuminated and it will go to the preset points of 0 F for the freezer and 37 F for the refrigerator Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments but does not shut off electrical power to the refrigerator Initially set the refrigerator control at 5 and the freezer control at 5 and allow 24 hours for the temperature to stabilize Several adjustments may be required Adjust the controls one increment at a time and allow 24 hours after each adjustment for the refrigerator to reach the temperature you have set Component Locator Views Fresh Food Section Control Panel m kr 17 Lights anc 1 Thermostat 1 i F T I Air Flow Tower H i I B Damper Inside Tower Freezer Section Evaporator Evaporator Thermostat Evaporator Thermistor Behind Panel Behind Panel Behind Panel 1 I 4 i a Machine Compartment Compressor Condenser lt u E I Components Knob Encod
13. 0001 29 Warranty Information Refr iger ator Warr For customers in the United States All warranty service provided by our Factory Service Centers or an authorized Customer Care technician To schedule service on line 24 hours a day visit us at GEAppliances com or call 800 GE CARES 800 432 2737 For The Period Of Will Replace One Year Any part of the refrigerator which fails due to a defect in materials or workmanship From the date of the During this full one year warranty GE will also provide free of charge all labor and in home original purchase service to replace the defective part Five Years Any part of the sealed refrigerating system the compressor condenser evaporator From the date of the and all connecting tubing which fails due to a defect in materials or workmanship original purchase During this full five year sealed refrigerating system warranty GE will also provide free of charge all labor and in home service to replace the defective part in the sealed refrigerating system Thirty Days Any part of the water filter cartridge which fails due to a defect in materials or workmanship From the original During this limited thirty day warranty GE will also provide free of charge a replacement water purchase date of the filter cartridge refrigerator What GE Will Not Cover Service trips to your home to teach you how to use Replacement of the water filter cartridge due to wate
14. 1 46043 HANDLE INSTRUCTIONS 1 ___ 31 46169 INSTALLINSTRUCTION ___ 1 3151515 MINIMANUAL 0 0 1 49 0008 ____ 11 WR78X10943 DOOR FOAMASS Y FZ 14 WR14X10184 GASKETASSEMBLYF 25 WR14X10185 GASKETASSEMBLYR 26 WR17X11585 GUIDERAILICEBIN 34 WR78X10944 DOORFOAMASSYR 35 WRO04X10138 NAMEPLATE 38 WRO02X11722 CAPHINGE C 39 WRO2X11721 CAPHINGE U 40 _ WRO02X11684 GUIDE RAIL MIDDLE T V 41 WR74X10170 FRONTGRILLEASSY 46 WR30X10050 SHELFICETRAY 48 WR17X11584 GUIDEAIR 50 WR17X11591 RAIL ASSEMBLY 58 02 11676 LEVELINGLEG 59 WR02X11673 LINK HUMIDITY L 00 60 ___ WR02x11696 _ RUBBER DAMPING 61 WRO2X11674 LINKHUMIDITYR 70 IwRo2X11701 RAILSLIDE C gt 75 _ WR17X11589 RAILASSY SLIDERHFZ 77 WR17X11590 RAILASSY SLIDELHFZ 1 79 WR02X11753 1 1 1 1 1 11 14 25 26 34 35 38 39 40 41 46 48 50 58 59 gt 80 ____86 WR60X10147 FANASSYBLADE ____89 WR32X10465 LOWERPAN 121 WR02X11720 STOPPERDOR f 122 WR02X11300 STOPPERCOMP 4 126 WRO02X11686 GUIDEASSEMBLYRAIL 1 WR02X11680 SNUGGER 141 WR21X10081__ CAN DISPENSER 4 27 PDS22AMBPAWW Shown VIEW
15. CATALOG 144 WRO2X11687__ CONNECTOR DOOR _ 2 200 WRO2X11689 SHUTTERSLIDE a 202 __ WR72X10148 SLIDEASSYLEFT 1 206 WRO2X11679 BRACKELHANDLEFF 2 212 WRO02X11678 BRACKET HANDLE FZR L 1 219 WR02X11672 LEVERSHUTTER 1 228 WR85X10057 EVAPORATORASSY 1 244 ___ WR55X10025 SENSORTEMPFF 3 244 WRO2X11677 BRACKELHANDLEFZR 1 251 WR02X11708 SUPPORTORCOVERT IV 1 265 WRO2X11698 26 WRO2X11671 ADJUSTER 141 270 02 1169 0 GROMMETFILLTUBE 1 310 WRO2X11664 COVERSENSOR 2 311 WRO2X11666 FRAME LOWERPAN 1 315 WR02X11741 ROLLERPIN 4 331 WR12X10657 FZRBSKTUPPERHANDLE 1 332 WR12X10658 FZRBSKTW TRIM 1 336 WRO2X11669 COVERGRILLEFAN 1 341 WRO2X11668 COVERPTC 1 352 WR30X10052 1 x 387 WRO02X11662 COVERICEBIN f VEG PAN ___408 WR32x10464 MEATPAN 1 409 WRO2X11670 ACCESSCOVER 1 412 21 10080 FZRBSKT UPPER 1 MAIN CVR 4 4 4 4 N gt 5 5 gt BP IN eS 03 IN N 430 WR17X11592 HOUSING CONTROL ___435 6 436 WRO2X11656 REFLECTORLAMP FZ 437 WRO2X11657 REFLECTORLAMP FF 503 WR71X10562 SHELFASSEMBLYR 504 WR71X10563 SHELF ASSEMBLY R 505
16. TECHNICAL SERVICE GUIDE 2003 Electronic Bottom Mount Refrigerators MODEL SERIES GBS22 P GBS20 P PDS22 P PDS20 P PUB 31 9112 1 04 IMPORTANT SAFETY NOTICE The information in this service guide is intended for use by individuals possessing adequate backgrounds of electrical electronic and mechanical experience Any attempt to repair a major appliance may result in personal injury and property damage The manufacturer or seller cannot be responsible for the interpretation of this information nor can it assume any liability in connection with its use WARNING To avoid personal injury disconnect power before servicing this product If electrical power is required for diagnosis or test purposes disconnect the power immediately after performing the necessary checks RECONNECT ALL GROUNDING DEVICES If grounding wires screws straps clips nuts or washers used to complete a path to ground are removed for service they must be returned to their original position and properly fastened GE Consumer amp Industrial Technical Service Guide Copyright 2004 All rights reserved This service guide may not be reproduced in whole or in part in any form without written permission from the General Electric Company Table of Contents AoW Cabinet MEET 6 Air Flow lower and Damper 11 Component Locator VIEWS u ee een 9 OD OS E 10 Contool
17. UFT DC PART MOTHERBOARD BN TEST JACK AC PART EVAP THERMODISK DEF HEATER gt N yes BL DEF HTR J9 COMPRESSOR BK BL BL TEMP 5 CONTROL 6 7 OVERLOAD gt Pk 8 GNYL 9 RELAY CAPACITOR 10 i ICEMAKER 2 FZ DOOR SWITCH 3 DH BL BL hy oP L pp I J1 i 8 MODEL ID 20 GNIYL 9 MODEL ID 22 FZ LIGHT WH FF THERMISTORS BN TX 1 FZ LIGHT THERMODISK BL BNL DOOR OPEN 6 R BL FAN NEUTRAL 9 J2 2 12VDC T 3 var Cow 5 COND FAN m 4 EVAP FAN 1 EVAP RPM a 13 POWER LEGEND BK BLACK BN BROWN RD RED BO BRIGHT ORANGE BL BLUE GY GREY GN GREEN YL YELLOW WH WHITE PR PURPLE SB SKY BLUE PK PINK 23 ue 9 N sped 9 Q N Note Exploded views and parts list are for illustration only Refer to parts catalog for specific model information PDS22AMBPAWW Shown AC V NK 5 SAU SG URE RE NO WR19436 C4 24 ss SS t ELM PRU ry ART WR19437 C2 25 ART NO WR19438 C2 26 PDS22AMBPAWW Shown VIEW CATALOG ___1 ___ 3
18. er 4 Unplug the fresh food light connector from the compartment ceiling Electronic and mechanical control panels are removed in the same manner Removal and Replacement 1 Remove the fresh food light cover 2 Remove the 2 screws that hold the rear of the control housing to the liner ceiling 5 The fresh food light housing is held in place by 4 tabs Press the tabs to remove the housing 3 There are 3 posts inserted into the liner ceiling holding the front of the control in place Firmly pull the control housing down at the front edge to release the posts Pull the housing towards the front to release the tabs in the back Note The foam may be holding the posts and tabs in the liner 6 Unplug the connector from the control board 7 Press the tab on the door switch and push the switch through the hole in the control panel housing 10 Air Flow Tower and Damper The air flow tower contains an internal damper The damper and tower are replaced as one unit Removal and Replacement 1 Remove the 2 screws on the top and bottom of the center shelf bracket Remove the bracket 2 Remove the screw from the bottom of the air flow tower Lean the tower forward to access the connector at the bottom of the tower i jm morer ot mop 5 o i eoa m ec c i ee a i mc mc m a i 3 Unplug the connector then remove the air flow tower
19. erature display See Note 3 below Note 1 1 amp 2 Single Fresh Food Thermistor 3 Custom Cool 4 Evaporator 5 Freezer Thermistor test results are P Pass 0 Fail S Short to 5 VDC Bad amplifier replace main control Note 2 You must enter the defrost test again to toggle the defrost heater off at the end of the test The heater will not come on if the evaporator thermistor is warm Note 3 Press FF temperature pad warmer colder to toggle Using the service test board you can change the temperature display from Fahrenheit to Centigrade on the refrigerator display but the customer will be unable to change it back without using a service test board Refer to Service Guide 31 9072 for additional information Condenser Fan Noise Photo Shown with Plenum in the Bent Position Symptom Loud airflow noise coming from the ne F S h condenser fan compartment Problem The plenum is bent out of position due to the screw tab being tightened at an angle Solution Release the tension off the plenum by loosening the screw tab Straighten the plenum to the proper position around the fan blade Tighten the screw so the tab is straight 19 Strip Circuits 3 Wire Electronic Temperature Control 6 Wire Encoder Temperature Control TEMP CONTROL RD CONTROL BN BD MOTHERBOARD MOTHERBOARD Damper Thermistors MOTHERBOARD MOTHERBOARD Condenser and Evaporator Fan FAN 2 Gono 5 COND FAN
20. han the temperature pads to active the test mode 4 Enter the display numbers as shown in the diagnostics chart on the next page for the test desired 5 Press and release any pad other than the temperature pads to active the test mode Note Selected models have limited test capability See the COMMENTS column in the Diagnostics Chart on the next page for clarification Note Refrigerators with an electronic temperature control must have the control disconnected before attempting the diagnostics test from the main control board 18 Diagnostics Chart FREEZER FRESH FOOD DISPLAY DISPLAY PIAGNOSTICS RESULTS COMMENTS As the knob is rotated the Onlv f delswiih S Encoder Test display will show the niy Tor models I temperature control knobs corresponding setting Checks each thermistor 7 Control System and displays P for pass 2 2 1 and Ot tor fail or display order 1 Dampers Test Opens each damper pauses Includes Custom Cool briefly and then closes dampers if applicable Runs each fan in sequence Sealed system on 100 of the 1 3 Prechill Test Starts Prechill mode Unit returns to normal on its own Toggles on the Defrost cycle Must press again to turn TASI See Note 2 below heaters off See Note 2 Main Control Reset Causes asyster reset a Causes asyster reset reset i i Mode Causes a temperature control board reset n Changes from F to or Degrees C F to F on temp
21. he curve of the Fresh Food door slightly so that the handle will snap into place when installed Remove handle Check for defective mounting brackets or bolts If defective replace Install handle according to Installation Instructions If the handle installs properly slides on and locks snaps into place but is loose remove the handle and tighten the mounting bolts Use a 10mm socket and ratchet or wrench Do not use a screwdriver as it will not provide enough torque for proper tightening Reinstall handle according to Installation Instructions included with the handle Remove handle Check for correct mounting brackets on the handle There is a right bracket and left bracket L handle has the word RIGHT printed in the bracket cavity The bracket should be installed in the bracket cavity marked RIGHT The L bracket should be installed on the opposite side Reinstall handle according to Installation Instructions Make certain that the arrow label on the handle is pointing at the center of the unit To verify the handle should look straight from a distance not slanted to the side Technical Data ELECTRICAL SPECIFICATIONS Temperature Control Position 5 32 Defrost Control 60 hrs 40 mins with no door opening Overtemperature Thermostat 140 110 F Defrost Thermistor
22. od compartment The damper is controlled by the main control board When open the damper allows chilled air from the freezer to move into the fresh food compartment Air returns from the fresh food compartment to the freezer compartment via two vents located to the left and right of the air tunnel AIR FLOW FRESH FOOD Vegetable bin Ix i x FREEZER w e 9 COLD AIR MIXED AIR AIR RETURN TO EVAPORATOR Nomenclature Model Number ICEMAKER CONFIGURATION B DOOR CUBIC FEET READY D DRAWER 20 or 22 FACTORY ICEMAKER ENGINEERING NOMENCLATURE A CONVERSION KIT PDS22MCPAWW INTERIOR SHELVES UPGRADE GLASS K SPILL PROOF GLASS BRAND PRODUCT DEPTH POWER G GE S STANDARD P PROFILE GE S STAINLESS STEEL DOORS Serial Number The first two characters of the serial number identify the month and year of manufacture M SPILL PROOF SLIDE OUT GLASS Example AG123456S January 2004 A JAN 2005 H The letter D FEB 2004 G designating the F MAR 2003 year repeats every G APR 2002 12 years MAY 2001 L JUN 2000 Z Example JUL 1999 V T 1974 R AUG 1998 T T 1986 S SEP 1997 S T 1998 T OCT 1996 R V NOV 1995 M Z DEC 1994 L EXTERIOR COLOR WW WHITE WHITE SS STAINLESS STAINLESS CC BISQUE BISQUE BB BLACK BLACK MODEL YEAR 2003
23. r the product pressure that is outside the specified operating range or Improper installation delivery or maintenance due to excessive sediment in the water supply Failure of the product if it is abused misused or used for the P bulbs Ma N ri other than the intended purpose or used commercially Damage to the product caused by accident fire floods Loss of food due to spoilage aracts of Cod Replacement of house fuses or resetting of circuit Incidental or consequential damage caused by possible breakers defects with this appliance Damage caused after delivery This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA In Alaska the warranty excludes the cost of shipping or service calls to your home Some states do not allow the exclusion or limitation of incidental or consequential damages This warranty gives you specific legal rights and you may also have other rights which vary from state to state To know what your legal rights are consult your local or state consumer affairs office or your states Attorney General Warrantor General Electric Company Louisville KY 40225 30
24. ver insert a flat blade screwdriver under the front of the cover and gently lift the cover Squeeze and lift the cover from the bottom until it releases from the compartment wall N 12 Note Some of the foam insulation may need to be Evaporator Thermistor removed to expose the thermistor and wire The evaporator thermistor is located on top of the evaporator behind the rear panel of the freezer compartment The thermistor is held in place by a tie strap To access the thermistor remove the drawers shelves and icemaker if installed from the freezer compartment Remove the back panel Shown with Back Panel Removed When replacing the thermistor cut the thermistor wires and splice the new thermistor using bell connectors as shown Always use RTV102 silicone sealant to seal the end of the connector from moisture Note The thermistor must be inside the thermistor cover but is not required to be inserted back into the insulation or inside the cabinet frame Evaporator Fan The evaporator fan is located above the evaporator behind the rear panel of the freezer compartment The evaporator fan is held in place by 2 screws To access the fan remove the drawers shelves and icemaker if installed from the freezer compartment Remove the back panel When replacing the thermistor cut the thermistor wires and splice the new thermistor using bell connectors as shown Always use RTV102 The fan motor and mount
Download Pdf Manuals
Related Search