Home

2013 Decal Catalog

1. SKYJACK CAPACITY DECALS SJ123468 70011 Capacity C N SJ126505 SJ124465 Side Force No Wind 0 v R v 1 v Side Force p fA pec 400 N 90 Ib I BH eu 1 400 N 90 Ib 0 m s 0 mph em es 1 m 125 mis ar jes 45 km h ZZ 124465AG 318 KG 182 KG 136 KG a 700 LBS 400 LBS 300 LBS SJ130315 SJ132333 Platform Capacity Platform Capacity 0 D allt MT Mo f Te ms mr mn i 11 FIFI 1 454 kg 318 kg 5 136 kg 317 kg 204 kg 8 113 kg 1000 Ib 700 Ib 300 Ib 700 Ib 450 Ib 250 Ib 130315AA C ZZ N SJ132712 SJ132713 5501 Capacity Wheel Load 01088 1 01 salasa 249 136 kg 113 kg 22 570 kg 550 Ib 300 Ib 250 Ib 1260 Ib 132712AA 132713AA All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademar
2. P Q 9 Q 1705914B 1705947 1705948 Platform Display Platform Box O 1705948B O 1705950 Platform Box 1705973 Platform Display 1250AJ gt 1705973 D 1705950E 1706108 Legend Platform T350 System 1 B Leveling Distress Jacks Set Function Enable C 1706108B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES ORIMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDE
3. 120V 42 1705374 240V 60HZ 240 60HZ 3251243 120V 60HZ 1700818 LP Gas ENG L P GAS LIQUID WITHDRAW SYSTEM 1703464 AC Power 120V 60Hz AC POWER TO PLATFORM 7034645 1705303 CSA This machine meets or exceeds applicable requirements of CSA B354 2 01 as originally manufactured for intended purposes 1705303A 1705850 Platform Color Pro Fit 1700584 Patent BLK JLG INDUSTRIES INC 1 JLG DRIVE McCONNELLSBURG PA 17233 COVERED UNDER ONE OR MORE OF THE FOLLOWING PATENTS 17 4171 UNITED STATES PATENTS 4775029 4754840 5740887 5992562 5160055 6065565 6098823 5957494 6390312 6488161 6330933 6501198 6571913 6561546 CANADA PATENTS 1291047 2076949 0785168 OTHER PATENTS PENDING 1703175 Lanyard GM D Rings CERTIFIED LANYARD ANCHORAGE POINT AS PER GM K 1 SPECIFICATION 1703175 1705132 Control ADE 1705834 Battery Charging Always charge machine until S the green 100 light is on Failure to do so will result in reduced battery life 1705834 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE an
4. O 91143284 Warning Decal MTB 5 N NO 1001102601 N NO 1001107849 Platform Display N O 1001107850 Platform Display 1001107851 Platform Display Qo 1001107926 Platform Display OU 1001107952 Platform Display CE Qo 1001107954 Platform Display 5 Q2 1001108494 Legend Platform 600SC U1 1001121803 Max Capacity 5001b 227kg O 1001121813 Warning Dual Capacity ANSI gi 1001122507 Warning Dual Capacity ANSI gi 1001122516 Warning Dual Capacity ANSI UT 1001126742 Warning Sky Glazier Capacity N NO 1001091272 Icon DOM 1001092071 No Pipe Racks Allowed N 1001094359 Troubleshooting ES 1001101420 Warning Sky Glazier Capacity 49 3 1001107853 Platform Display 0 1001107927 Platform Display 3 0 1001107953 Platform Display 860SJ 30 JLG INDEX Part Number Description Page Number 1230ES Manual Descent 1706670 1706671 38 38 5 8 8 35 1706676 1706708 1706709 1706712 1706741 2 2 2 4 4 1706765 1 Quick Refernce 4 1706768 1706832 1706890 1706897 1706914 1706924 1706926 1706931 User Flash Codes Legend 1706941 Legend MTB 1706942 M Max Tire Load M 1706946 Legend MTB TB j 4 TB 1706950 Platform Display DOM 8 8 Platform Display EURO 2 1707014 1707015 1707055 1707110 26 2 26 26 26 14 27 27 14 14 9
5. PLATFORM MATERIAL TRAY Brakes must be released before towing or manually moving machine All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE
6. gt 100 0 N MAX A A E Zan j 500 155 227 kg UNRESTRICTED CAPACITY 1706671 1230ES Wheel Load C 1706311 Tire Load 20701b 939kg MAX 2070 65 939 kg MAX 400 kg 880 5 1706671 1 lt x e eo c Fr 1706311A 0 1707013 5001 Max Capacity 6005 TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 900 65 T amp 230 kg AES 100 Ib 450 N UNRESTRICTED CAPACITY gt e T MAX 2 DOM 1707013 B 1707055 5001 Capacity e gt sh 500 Ibs S TT amp 230 kg 2s 230 kg UNRESTRICTED CAPACITY MAX 100 1b 450 N CAPACIT NON RESTREINTE MAX a 1707055 C CAN 12 5 m s MAX 1705978 A Tire Load 18351b 832kg 1 Q 1707014 B 1705978 230kg Capacity ep 230kg MAX qq 70ko 400N MAX 1706126 Max Tire Load MAX 3720 kg 8200 Ibs 1706310 MAX 1835 5 832 0 1706126 A 1706942 Max Tire Load MAX 8500 Ibs 3860 kg 1706942 A 1707014 Dual Capacity TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER amp a 500 Ibs TT amp 230 kg UNRESTRICTED CAPACITY e gt 100 6 450 N MAX DOM All
7. 250 kg 568 kg m 0 e MAX di 136 kg 1 il 115 kg MAX 120 LBS 534 N 3252694B M 3252689A 3252751 0292794 Capacity EXT Deck C D L B Capacity EXT Deck C D L B MAX MAX MAX 1250 LB 750 LB 250 LB 565 kg 340 kg 115 kg e e TTT TET T we TO Mu 500 LB 500 LB V 1 MAX MAX 225 LBS 150 LBS 1000 667 N 3252751A 3252752A 4105262 Boom Angle Indicator 1001121801 Max Capacity 5001b 227kg N A S e gt NS 100 5 445 N Hy Y d 900 Ibs TT A 227 kg TS MAX UNRESTRICTED CAPACITY E i bs ANSI 2 A ie 1001121803 Max Capacity 5001b 227kg amp Lo 900 65 227 kg 100 Ib 445 N UNRESTRICTED CAPACITY MAX CAPACIT NON RESTREINTE CAN 1001121803 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SE
8. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console On units with inoperative or defaced capacity indicators do not exceed 500 pounds maximum platform capacity DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 1704096 D RISQUE D EXPLOSIONT D INCENDIE Rechargez les batteries dans un local bien ventil d pourvu de flammes de fum es ou d tincelles L inobservation de cet avertissement peut entrainer la mort ou des blessures graves 1704340 A TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console On units with inoperative or defaced capacity indicators do not exc
9. Improper operation or maintenance can result in serious injury or death Scheduled maintenance Use the maintenance inspections must be inspection report in the completed as specified in service manual for required the appropriate service recordkeeping Keep manual records on all inspections Use this decal to record 5 the date of the annual Maintenance inspections inspection the initials of must be completed by a the inspector and the person trained and qualified machine owner on the maintenance of this machine 52865 B Serial number Date of Inspection Inspected by Machine Owner All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES A
10. e MAX 4WD GRADEABILITY 45 e MAX SIDE SLOPE 5 1704903 Gradeability IMPORTANT WHEN DRIVING WITH THE PLATFORM COMPLETELY LOWERED DO NOT EXCEED e MAX GRADEABILITY 35 e MAX SIDE SLOPE 5 1704903A 3252672 Lift Diagram 400 DOM IMPORTANT LIFTING INSTRUCTIONS TIE DOWN INSTRUCTIONS 1 See the Operators and Safety Manual for approximate 1 Place boom in the stowed position with turntable locked gross weight of machine as originally manufactured 2 Remove all loose items from machine 2 Place boom in the stowed position with turntable locked 3 Secure the chassis and the platform using straps or 3 Remove all loose items from machine chains of adequate strength 4 Properly adjust rigging to prevent damage to machine and so machine remains level Refer to the Operators and Safety Manual for more information 1581 15 mm 3252672 B 1704446 Charging Instructions IMPORTANT Battery charging instructions For maximum battery life Avoid completely discharging the batteries Fully charge the batteries each day the machine is used Charge the batteries at available times between full charges Ensure that the battery plates are immersed in battery fluid before charging However to avoid over flow Do Not fill the fluid level until after charging To charge batteries connect charger to proper voltage source with 15 AMP minimum capacity The ch
11. 1704446 1704460 Charging Instructions 40 19 Drive amp Steer JLG INDEX Part Number Description Page Number oo 1705828 Footswitch CE N Q2 Oo Q2 1705834 Battery Charging Go 1705850 Platform Color Pro Fit Oo Q2 1705864 JLG 12 1705880 Cap 5001b 227kg 8001b 363kg 1705911 Nameplate Load 1705912 Platform Box ND Q2 N 1705913 Platform Display 1705914 Platform Box NO oS E 170594 Cap 5001b 227kg 8001b 360kg NO x 1705947 Platform Display 1705948 Platform Box N 1705950 Platform Box NO B N 1705973 Platform Display 1250AJ 1705978 230Kg Capacity 1706100 Gooseneck 10 Q2 oo 1706106 Capacity MTB T350 1706107 Capacity Platform T350 N NN 1706108 Legend Platform T350 EN Oo 1706111 Warning Machine Operation 1706112 Warning Speed Limit Max Tire Load 1706126 Oo U1 1706128 Danger Electrocution Oo 1706135 Warning Inspection 1706170 Gooseneck 6 Q2 CO Brake Set Q2 CO 1706263 CO 1706296 Battery Warning Lull EE ee ee es ae we ES NE EN ME M EE GINE 3337 7757 Oo 1706298 Warning Carry Personnel Oo 1706300 Ether Warning EN Oo 1706302 Warning Pinch Point Boom 1706306 Warning Tip Over Hazard 48 1706310 Tir
12. 750KV to 1000KV 45 Check work area for overhead obstructions or other possible 0 Tip over Hazards hazards Do not raise or extend boom unless Be aware of crushing hazard machine is on firm level ground when grasping the platform guard Do not depend on tilt alarm as a rail level indicator Tilt alarm sounds in Observe and use color coded platform only when machine is on a direction arrows on the platform severe slope controls and drive chassis for drive and steer functions Do not lower the boom unless the area below is clear of personnel and obstructions Do not raise boom when wind speeds may exceed 28 mph 12 5 m s Do not operate machine in strong or gusty winds Do not increase surface Explosion Hazards area of platform or load Increasing d 55 area exposed to wind will decrease Do not start engine if you smell or detect liquid machine stability petroleum gas LPG gasoline diesel fuel or other 1 5 explosive substances Do not drive machine on or near een 5 Analy unstable Do not refuel the machine with the engine running surfaces or other hazardous conditions with boom raised 85 or extended Damaged Machine Hazards Do not drive machine on a slope that exceeds the Do not use a damaged or malfunctioning machine maximum slope or side slope rating for the machine Be sure all maintenance has been performed as Use extreme care and slow speeds while driving the specified in the appropriate operator s and service machine i
13. function switch Lift up and extend boom prevented telescope in lower boom then reset outriggers 2 Outrigger movement Flashes prevented retract and lower boom then activate outriggers A Push Emergency Stop to shut machine off 4 Wait 5 seconds and Flashes restart machine Electric Powered Batteries may need A recharged 5 Engine Powered Shut off and wait 5 seconds Restart engine Check fuel and oil level if conditions persist Flashes 1706914 A 1706926A 1706931 Legend 5 Chassis Platform AC e Power e Start e Drive FEU Out of Capacity Engine Low Fuel Generator Glow Plug Enable Emergency 5 Select Indicator Distress ON Indicator J Indicator Stop Auxiliary s v a 4 Power a Function A n Soft Speed Platform Articulating Main Soft B yJ Rotate Telescope Fly Boom Telescope Touch eer y Control y Override Indicator hd 1706931 B 1706941 Legend MTB Power Batte Engine A Function Engine D Emergency Chaos A y Coolant D plow rua Enable Malfunction Condition Temperature Indicator Auxilia Control Engine gine Low Fuel Power _ Off e fom erature OF E Level Hi Ground ressure ilter Control 1706941 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to
14. operate this machine Training includes reading and understanding the safety operating and maintenance instructions in the manufacturer s manuals knowing your employer s work rules and applicable govermental regulations Untrained operators TH IS MACHINE IS NOT could cause SERIOUS INJURY OR DEATH to themselves or others INSULATED Failure to follow instructions will result in death or serious injury DO NOT OPERATE THIS MACHINE UNLESS you have been properly trained as described in the JLG operation and safety manual by a qualified person and authorized to THIS MACHINE MUST NOT BE USED UNTIL IT TIP OVER HAZARD IS INSPECTED AND OPERATING PROPERLY Machine must be on a smooth firm and level surface before swinging elevating and or extending boom DO NOT exceed platform rated capacity DO NOT operate this machine unless you have been properly trained as Make sure the operating surface will support the machine described in the JLG Operation and Safety Manual by a qualified person DO NOT drive with platform raised or raise platform when on uneven sloping or soft surfaces and authorized to operate this machine Your training includes reading including trucks trailers railway cars floating vessels scaffolds or similar areas and understanding the safety operating and maintenance instructions in DO NOT raise platform during high winds manufacturer s manuals the Manual of Responsibilities knowing your
15. serious serious injury 1706387 B 1706765A injury No riders A 1706768B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG WAR
16. 0180846 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SNORKEL DANGER DECALS SN0072530 SN0072541 Electric Hazard Do Not Operate A pyar N e R Death or serious injury can
17. 150 Ibs qt 3 150 Ibs qe gt 150 Ibs e 110 kg 70 kg 0 0 1 70 kg 1001101420 C 1001121813 Dual Capacity ANSI 1001121800 Dual Capacity DOM TIP OVER HAZARD NC 500 Ibs UP TT amp 227 kg UNRESTRICTED CAPACITY l AX TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER Do not exceed the platform capacity indicated on the capacity indicator 00 0 b located on the platform control console On units with inoperative or defaced 5 capacity indicators do not exceed 500 pounds maximum platform capacity 100 Ib 445 N 1 m TTT 4574 kg DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER ANSI 1001121800 A 500 Ibs T T amp 227 kg UNRESTRICTED CAPACITY E 100 Ib 445 N MAX 1001121813 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademark
18. 7200 Ib 1704829 A 1705021 Capacity 15001b 681kg EXT MAX 1500 LB 680 kg MAX 300 LBS 1335 N 1705021A 1705167 2625015 Max Tire Load 1705178 Max Tire 40 MAX MAX 26 250 65 25000 Ibs 11 907 SG 11340 kg 1705167 B 1705178 A 1705638 Capacity 55001b 230kg MAX CAPACITY 500 Ibs 227 kg 9 Fra 500 Ibs 227 kg MAX Ib 445 N 100 1705638 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF T
19. AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1001108496 Legend Platform 800S Chassis Platform System Low Fuel Glow Plug Platform Out of Capacity Distress Level Generator Indicator Indicator ON Indicator Function Platform Exceeding 4 Main Touch Drive Speed monom Out of PY ae Operating Telescope Indicator Orientation Control Level A Radius 1 Touch AA Override 1001108496 A 1001110226 1001121657 Light Display Platform Display 6 4B S Y 454 KG MAX 1001121657 B 1001110226B 1001122384 Light Panel Platform 1001131168 Stop amp Auxillary Power 1001131168 B 1001122384 B 1001132175 Stop amp Generator 1001132175A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevati
20. CLOCKWISE UNTIL TIGHT GETTING STARTED engine fuel if equipped Ground Control Pull emergency stop to turn on Hold enable switch then activate machine function STEP Fully lower and retract 1 0 boom lower outriggers until all outrigger lights are on and machine beeps 3 times indicating machine is properly leveled 4 RESET PARKING BRAKE TURN BRAKE CAMS TO VERTICAL USING 3 4 WRENCH 1706890 Getting Started E Read the Operation and Safety Manual Perform Pre Start Inspection Set Parking Brake Uncouple from tow vehicle and disconnect lights and chains LES Unlatch Boom All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A P
21. CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG INSTRUCTION DECALS 1703398 Towing Winch BRAKE RELEASE INSTRUCTIONS WINCHING OR TOWING 1 DISENGAGE DRIVE MOTORS 2 RELEASE PARKING BRAKE N N Ded BRAKE CAMS TO HORIZONTAL USING RENCH TURN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT 3 WINCH OR TOW pen 5 ENGAGE DRIVE MOTORS me a 6 TURN VALVE KNOB CLOCKWISE UNTIL TIGHT 1703398 4 RESET PARKING BRAKE 7 N TURN BRAKE CAMS TO VERTICAL USING 3 4 WRENCH 1704017 Brake Release Instructions 1702908 Manual Descent MANUAL DESCENT INSTRUCTIONS FOR THE ARTICULATING JIB TO LOWER THE ARTICULATING JIB 1 TURN THE KNOB LOCATED ON THE JIB CYLINDER COUNTERCLOCKWISE 2 WHEN MANUAL DESCENT FUNCTION IS COMPLETED TURN KNOB ON JIB CYLINDER CLOCKWISE 1702908 MANUAL DESCENT INSTRUCTIONS INSIDE 1702901 1703698 Towing Wenching Tow Speed 1702901 Manual Descent Va TURN BRAKE CAMS TO VERTICAL USING 3 4 WRENCH BRAKE RELEASE INSTRUCTIONS WINCHING OR TOWING 4 RESET PARKING BRAKE EN 3 WINCH OR TOW 1 DISENGAGE DRIVE MOTORS T
22. Do not exceed platform rated capacity or rated number of people Evenly distribute load Do not expose platform to high winds or horizontal forces Machine must be on smooth firm and level surface before elevating platform Do not drive with platform raised or raise platform when on uneven sloping or soft surfaces including trucks trailers railway cars floating vessels scaffolds or similar areas Do not drive near drop offs holes or other hazards Make sure operating surface will support the machine Make sure all tires are in good condition Do not carry sheet type materials i e drywall plywood roof panels outdoors or in any windy conditions as they may act as a wind sail Death or serious injury could occur from a tip over CRUSHING HAZARD Always look in the direction of movement Keep clear of obstructions Keep all body parts inside the platform during operation Failure to follow instructions could result in death or serious injury Manufactured by JLG Industries Inc 1 877 JLG LIFT WWW JLG COM 1706676 E operate this machine Your training includes reading and understanding the safety operating and maintenance instructions in manufacturer s manuals knowing your employers work rules and applicable governmental regulations Follow the Instructions in the Operating Manual the Manual of Responsibilities and applicable standards for required inspecti
23. IF SO EQUIPPED BY TURNING CCW BEFORE PUTTING VEHICLE BACK INTO SERVICE TURN CW TO CLOSE SJ106515 Brake INSTRUCTION FOR TOWING PUSHING OR WINCHING REFER TO OWNERS MANUAL 106515AC All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE
24. Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG MISCELLANEOUS DECALS 1702612 Lanyard 7 8 D Ring ATTACH LANYARD HERE 1704412 Oil Chart 1704412J 1702276 Attach Safety Belt Here ATTACH SAFETY BELT HERE n Attach Lanyard Here 3 4 Mobil EAL Envirosyn H46 ATTACH LANYARD HERE P N 2300021 Fuchs Plantolube Polar 15S P N 2300030 EXXON UNIVIS HVI 26 P N 2300039 Mobil EAL Envirosyn H32 P N 2300042 Quintolubric 888 46 P N 2300019 Union Carbide Ucon Hydrolube HP 5046D 1705375 240V 3 Phase 60HZ 240V 3 PHASE 60HZ 1705374 A 1705375 A 3251813 Built in the USA 3251243 Built With Pride In The S 3251813C
25. Jib t Main 0 8 Soft Touch 1 d Rotate 7 of bed Telescope Lift 1 Telescope an Indicator Drive Lan Steer N 1704253 D 1704465 MTB 400S 1704460 Drive er Steer Generator Start 1704252 C 1704465 C All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WH
26. NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE GENIE WARNING DECALS GN28161 GN28175 GN28177 Crush Hazard Hand Compartment Access Crush Hazard A Crush Hazard Contact with moving parts can result in death or serious injury m Keep away from moving parts 28161 C Crush Hazard Death or serious M injury may result from platform crushing Compartment access personnel is restricted Only trained maintenance personnel against boom Contact with should access compartments Access components under by operator is only advised when Keep away from any cover may result performing Pre operation Inspection All path of moving 1 y 5 D compartments must remain closed and platform in serious injury secured during operation 28177 C GN28236 Improper Operation GN52865 Annual Inspection Read and understand Operator s Manual Responsibilities Manual and Safety Manual and all safety signs before using or maintaining machine Annual Inspection Record Failure to complete required inspections If you do not understand the ae could result in death or serious injury information in the manuals consult your supervisor the owner or the manufacturer 8546
27. TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SNORKEL ILLUSTRATION PICTORAL DECALS SN0070540 SN0070541 Yellow Arrow Blue Arrow SN0071926 SN0071927 Diesel Fuel Hydraulic Oil bi DIESEL HYpRAULIC OIL 0071926 SN0080650 SN0083426 SN0083431 Lift Tie Down Symbol Lift Tie Down Location TB60 Lifting Lug Center of Gravity in Stowed Position ca Tie Down Lug 0080650 0083426 Tie Down Lug approximate All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IM
28. Tire Load 62001b Max Tire Load 83501b 1704828 Max Tire Load 72001b N 1704829 1704903 Gradeability N 1704952 Platform Display 1704993 Light Panel 7 5016 DOM ON 1704995 Warning 750 500 Cap Platf 1704996 Warning 750 500 Cap DOM N 1704997 Stop N 1705015 Legend 1705016 Manual Descent Q2 N 1705020 Capacity 22501b 1020kg EXT 11 EE LEE poe ee LLL ae e EL NER TSS N 1705021 Capacity 15001b 681kg EXT m N 1705042 Max Load Jacks N 1705059 Dual Cap 50016 DOM MTB 1 1705088 Warning Dual Cap 500 DOM 46 1705089 Warning Dual Cap 500 MTB 47 1705096 Lift Diagram 1200 1350 1705132 Control ADE 1705168 Warning Platf Cap 1200 1350 47 1705170 Headlight 2 1 JLG INDEX Part Number Manual Descent Instructions 1703819 1703822 1703823 Description Page Number Danger Electrocution Hazard 1703868 97 1 37 35 j 45 45 j 45 11 6 11 1703870 1703924 1703936 1703942 230kg 5001b Max Capacity 1703948 1703953 1703960 1703984 1703996 1704000 Caution No Hands CAN 16 4 3 1704016 1704017 1704096 1704104 7 1 6 19 19 0 19 9 7 1704125 1704134 1704192 1704201 1704239 EMS Euro Requirement 3 1704240 1704248 1704252 1704253 1704260 1704277 Lanyard Attachment 3 7 1 1704445 Max Tire Load 1 1704340 1704399
29. USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine Your training includes reading and understanding the safety operating and maintenance instructions in manufacturer s manuals the Manual of Responsibilities knowing your employers work rules and applicable governmental regulations TIP OVER HAZARD This machine is equipped with a Boom Control System Red light indicates the platform is outside the operating area and operation of certain boom functions may be disabled Attempts to use DO NOT replace items i e Batteries tires counterweight etc with items of different weight or specification because this will affect the stability of the machine DO NOT modify or change this machine without written approval from the manufacturer HAZARDOUS VOLTAGE INSIDE Do not remove cover with engine running Refer to the Service and Maintenance Manual for servicing instructions Death or serious injury could result from contact with energized conductors 1705387 B the disabled functions cause Qo flash and an audio alarm to sound Immediately return the platform to the ground If Q stays on the system must be repaired by JLG authorized service personnel before machine can be used Make sure all tires are in good condition and air filled tir
30. blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG ILLUSTRATION PICTORAL DECALS 4110226 Lift Point Tie Down 4110226 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trade
31. or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CAPACITY DECALS 1706106 Capacity MTB T350 1706107 Capacity Platform T350 EHITT 440 Ibs 200 kg UNRESTRICTED CAPACITY A a gt 500 Ibs 227 kg UNRESTRICTED CAPACITY 440 Ibs 200 kg UNRESTRICTED CAPACITY
32. or specification because this will es de la machine par exem jour les inspections requises NE PAS remplacer les nuire la stabilit de la ma crite du fabricant mauvais fonctionnement STOPPER toute op ration 0 affect the stability of the machine DO NOT modify or change this machine without written approval from the manufacturer Operate this machine with extreme caution STOP all operation if a malfunction occurs ie terrupteurs de fin de course du moteur haute vitesse et de la commande de r gime lev L utilisation inad quate de cette machine peut entrainer la mort ou causer des blessures graves RISQUE DE RENVERSEMENT il faut placer la machine sur une surface lisse dure et de niveau Test foot switch for proper operation Test high engine and high drive cut out switches for proper operation Avant de relever ou de d ployer la fl che Improper use of this machine could cause death or serious injury IE PAS d TIP OVER HAZARD Machine must be on a smooth firm and level surface before elevating and or extending boom DO NOT exceed platform rated capacity Make sure the operating surface will support the machine DO NOT drive with platform raised or raise platform when on uneven sloping or soft surfaces including trucks trailers railway cars floating vessels scaffolds or similar areas DO NOT raise platform during h
33. result from not complying to the following safety rules e Do not operate this machine unless you are a qualified operator and 2 LECTROC UTI Q N HAZAR D have read and thoroughly understand all information given in the Operator s Manual and on DANGER and CAUTION signs on this machine THIS MACHINE IS NOT ELECTRICALLY INSULATED Maintain 10 feet minimum clearance from electrical power lines and apparatus You must allow for platform sway rock or sag 9 Maintain 10 feet minimum clearance from electrical power lines and apparatus This machine is NOT electrically insulated e Do not exceed the unrestricted platform capacity shown on the platform This aerial device does not provide protection from contact with or proximity to an electrically charged conductor Do not operate this machine on soft or unstable ground Death or serious injury will result from such contact or inadequate clearance 0072530 Operate this machine only on a flat level surface SN0073298 SN0074210 Foam Solid Tires Electric Tipping Hazard A DANGER E MACHINE TIPOVER HAZARD DEATH OR SERIOUS INJURY ELECTROCUTION HAZARD DEATH or serious injury can result if machine tips over Do not operate this machine unless you are a qualified operator and have read and thoroughly understand all information given in the Operator s Manual and on danger and caution signs on this machine This machine is not electrically insulated Maintain 10 feet minimum cle
34. serious injury Do not carry sheet type materials i e drywall plywood Follow the Instructions in the Operating roof panels outdoors or in any windy conditions as Manual the Manual of Responsibilities they may act as a wind sail and applicable standards for Death or serious injury could occur from a tip over required inspections CRUSHING HAZARD Do not replace items i e Batteries Always look in the direction of movement Wheels counterweight etc with items of THIS MACHINE MUST NOT BE USED UNTIL IT IS Keep clear of obstructions i 5 PME UR INSPECTED AND OPERATING PROPERLY Keep all body parts inside platform during operation Different weight or specification petanse this will affect stability of machine DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Failure to follow instructions could result in Manual by a qualified person and authorized to operate this machine Your training includes reading and understanding the safety operating and maintenance instructions in manufacturer s manuals the Manual of Responsibilities knowing your employers work rules and applicable governmental regulations du s FALLING HAZARD DO NOT replace items i e Batteries tires counterweight etc with items of different weight Keep both feet on platform floor or specification because this will affect the stability of the machine D p t climb sit E and latf ra
35. the platform Une chute du haut de cette plate forme risque d entrainer la mort ou de causer des Wear approved fall protection items and attach to marked locations Keep both feet on platform floor Ensure entrance area is properly closed DO NOT use planks ladders or similar items in platform to get added reach Falling from platform could cause death or serious injury CRUSHING HAZARD Always look in the direction of movement Keep clear of obstructions Direction of drive and steer functions are opposite to the motion of the controls when the boom is positioned over the front axle Always look at the decals on the chassis and blessures graves RISQUE D ECRASEMENT jarder toujours dans la direction du mouvement as manoeuvrer en pr sence d obstacles que la fl che est en position de repos sur l essieu avant le sens des fonctionsd entrainementet de direction est l inverse de l action des commandes Regarder toujours les autocollants plac s sur le Reg e chassis et sur les commandes d entra nement et de direction pour manoeuvrer dans le bon sens Le non respect de ces consignes peut entrainer la mort ou causer des blessures graves 1703924 D drive steer control for proper direction Failure to follow instructions could result in death or serious injury 1706676 1230ES Instructions Warning FALLING HAZARD Keep both feet on platform floor Do not climb sit or sta
36. your employers work rules and applicable governmental regulations Follow the Instructions in the Operating Manual the Manual of Responsibilities and applicable standards for required inspections Do not replace items i e Batteries wheels counterweight etc with items of different weight or specification because this will affect stability of machine Do not modify or change machine without written approval from manufacturer Operate this machine with extreme caution STOP all operation if malfunction occurs Improper use of this machine could cause death or serious injury 1705679 C 1705492 A Do not stand under or around platform 1705694 Crushing 1930ES CRUSHING HAZARD during operation Use safety props for maintenance Failure to follow these instructions could result in death or serious injury 1705694A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of th
37. 06705 Do Not Alter Do not alter or disable limit switches safety switches or interlocks 106705AC 106704AC J SJ106704 Description DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER AUTHORIZATION AND TRAINING IT IS THE OPERATOR S RESPONSIBILITY TO 1 READ AND COMPLETELY UNDERSTAND ALL DANGERS WARNINGS CAUTIONS AND INSTRUCTIONS ON THE WORK PLATFORM AND IN THE OPERATING 2 THE OPERATOR SHOULD BE ASSURED THAT THE WORK PLATFORM HAS BEEN PROPERLY MAINTAINED AND INSPECTED IN ACCORDANCE WITH GOVERNMENT REGULATIONS BEFORE USING IT 3 PERFORM ALL DAILY MAINTENANCE INSPECTIONS DO NOT EXCEED RATED LOAD DO NOT RAISE THE PLATFORM WHEN ON A SOFT AND OR SLOPED SURFACE RAISE THE PLATFORM ONLY WHEN ON A FIRM LEVEL SURFACE THE PLATFORM CAN BE LEVELED WITH PROPERLY POSITIONED OUTRIGGERS IF EQUIPPED DO NOT USE WITHOUT RAILINGS GATE ENTRY CHAINS OR RAILING LOCKING PINS SECURED IN PLACE FAILURE TO OPERATE THIS EQUIPMENT IN ACCORDANCE WITH THE OPERATING INSTRUCTIONS ON THIS EQUIPMENT AND IN THE OPERATING MANUAL COULD RESULT IN SERIOUS INJURY OR EVEN DEATH SJ106703 Orifice THE FITTING IN THIS CYLINDER IS EQUIPPED WITH LOWERING SPEED ORIFICE WHEN SERVICING OR CHANGING THE CYLINDER THIS FITTING MUST BE RE INSTALLED OR REPLACED WITH AN IDENTICAL NEW ONE 106703AA SJ115531 Falling FALLING HAZARD DO NOT OPERATE MACHINE WITHOUT SECURING PINS AT ALL HINGE POINTS 115531AA All origi
38. 0SJP 1100SB 1127 3 40 m 23 9 7 24 m 1200SJP 1705096 E 1703817 Fork Lift 1703817A 1704016 Forklift Location 2 1704016 C 4 1704726 Lock Latch Ko N st N 1703814 Tie Down 1703814A 1703822 Manual Descent Instructions 1703822A 1704277 Lanyard Attachment N N N e N E 1705016 Manual Descent 1705016 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES ORIMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBL
39. 110333AB All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK WARNING DECALS SJ1
40. 14 27 2 1707111 1707113 3251102 Generator 3 8 28 3252602 Box Lid W Tilt amp BD 3251243 3251813 3252620 Controller Box Lid 2 3252672 8 Lift Diagram 400 DOM 40 JLG INDEX Description Page Number 1001108492 Legend Platform 400S 31 Legend Platf 450A 450A 510A 600A 600S 31 1001108493 Legend Platf 7AOAJ 800A 800AJ 1001108496 Legend Platform 800S 1001110226 Light Display 1001108495 Warning Maximum Cap DOM 1001122369 Warning Dual Capacity 1001122384 Light Panel Platform 1001122508 Warning Dual Capacity 1001121814 1001131168 Stop amp Auxillary Power 1001132175 Stop amp Generator SKYJACK INDEX Description Page Number Caution Fork 58 Danger Safety Bar 57 Caution Brake 55 Chea 0 Warning Orifice 61 Warning Description 61 Warning Do Not Alter 61 Emergency Lowering 60 De AG Owe 0 Emergency Stop 56 SJ1155831 Warning Falling SJ115982 Danger Drive Elevation SJ116577 Torque Hi Low SJ119674 Emergency Battery Disconnect SJ119866 Danger Pinch SJ123468 700 Ib Capacity SJ123628 Operator s Manual SJ124362 Warning Do Not Wear SJ124767 Lift Point Tie Down SJ125724 Railing Height SJ126056 Falling Hazard Decal SJ126505 Side Force No Wind SJ129838 KEEP SJ124465 Side Force SJ129839 CLEAR SJ130018 Harness Anchor SJ130315 Platform Capacity Control Up Down Lift Up Down Drive Drive Lift Platform Capacity NE
41. 3798 Warning Danger MTB nn Oo UT 1703804 Warning Crushing 1703805 Danger Electrocution 1703808 Legend MTB 1 8 1 1703816 Warning Danger 5 1703817 Fork Lift 37 1703818 Warning Crush Hazard Part Number 4 1700584 1700818 1701214 Warning O R DOM CSA No Tie Down Lift 1701499 1701500 3 3 5 36 36 36 36 6 6 6 1701502 1701504 1701505 Manual 3 1701509 1701518 170 529 1701542 1701640 1701644 Battery Charger 9 6 3 1701645 1702153 1702155 1702265 1702276 1702294 10 0 6 0 17 17 17 17 7 1702387 1702564 1702565 Horn 1 1702566 1702567 1702610 1702612 1702676 1702688 50016 Capacity 10 1702784 Legend 17 41 1702961 Warning Prop 65 Gas 45 1702785 1702962 1702966 Warning Prop 65 DSL 45 10 50016 Capacity Part Number Description Page Number MTB 400S Ne 1704465 T ON 1704479 Warning Battery N 1704480 Legend 1704484 Platform Display DOM 1704485 Platform Display 1704487 Platform Disp DOM 7501b N 1704502 Symbol Legend For Crawler 1704521 Gradeability 1704540 Storage Capacity Max Tire Load E 1704559 Ol N 1704575 Warning Danger MTB N m 1704707 Platform Display DOM Lock Latch Oo N 1704726 1704752 Max Tire Load 72001b Oo Q2 1704789 E450AJ 1704827 Max
42. 3942 A 1703948 1703953 Crushing CAN Crushing CRUSHING HAZARD RISQUE D ECRASEMENT CRUSHING HAZARD Do not stand under a raised platform or boom Ne pas se poster sous la plate forme or between a rotating platform and the boom ou la fl che sur lev e ni entre la plate forme pivotante et la fl che Do not stand under a raised platform or boom or between a rotating platform and the boom Keep all body parts away from any Se tenir l cart des pi ces en mouvement moving components Keep all body parts away from any moving components Le non respect de ces consignes peut entra ner la mort ou causer des Failure to follow these instructions could blessuresgraves result in death or serious injury CAN 1703948 B 1703953 Failure to follow these instructions could result in death or serious injury All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers
43. 82 ELECTRICAL SYSTEM IN DIRECT LINE OF SIGHT OPERATE CONTROLS LIGHTLY AND CAUTIOUSLY WHEN LIFTING PERSONNEL READ AND UNDERSTAND PERSONNEL WORK PLATFORM USER S MANUAL BEFORE LIFTING PERSONNEL DO NOT USE PERSONNEL WORK PLATFORM WITHOUT THE PROPER JLG MATERIAL HANDLER PERSONNEL WORK PLATFORM CAPACITY CHART DISPLAYED IN CAB FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH 9055 3027 REV B 1001101420 Sky Glazier Capacity TIP OVER HAZARD For use on JLG Boom Lift j 1 Do not exceed platform tray capacity models with side entry N Refer to capacity decal on tray and SkyGLAZIER platform only UN Pa Operating Manual for capacity ratings ad 1 Properly secure panel before Observe all operating instructions and restrictions moving platform for use for this accessory i e Remove tray when not in use ims D YGLAZIER Failure to follow instructions could Sa YU Bal BAe NO result in serious injury or death MODEL 400S 600A 600S 800A 800S 1200SJP 1350SJP 1250AJP MODEL 860SJ MODEL 460SJ 660SJ 600AJ 600SJC 800AJ 1000 Ib 450 kg Zone 500 1b 230 kg Zone 750 Ib 340 kg Zone 500 1b 230 kg Zone 500 1b 230 kg Zone 2d 500 Ibs 90 Ib M 250 Ibs 45 Ib n 440 lbs 90 Ib 250 lbs 45 Ib a 250 Ibs 45 Ib M Ts 230 kg 400 N a 110 kg 200 N TT 200 kg 400 N 1 110 200 1 110 200 N y f f f 1 250 Ibs e gt
44. ACITY 100 Ib 445 N ae 750 los w TPR a 340 ko ANSI RESTRICTED CAPACITY 1001122516 A 1001126742 Sky Glazier Capacity IMPORTANT TIP OVER HAZARD For use on JLG Boom Lift Do not exceed platform tray capacity models with side entry Refer to capacity decal on tray and SkyGLAZIER platform only Operating Manual for capacity ratings Properly secure panel before Observe all operating instructions and restrictions moving platform for use for this accessory 5 ry Remove tray when not in use Failure to follow instructions could result in serious injury or death MODEL 400S 600A 600S 800A 800S 1200SJP 1350SJP 1250AJP 1500SJ MODEL 860SJ MODEL 460SJ 660SJ 600AJ 600SJC 800AJ 1000 Ib 454 kg Zone 500 1b 227 kg Zone 750 Ib 340 kg Zone 500 Ib 227 kg Zone 500 1b 227 kg Zone d 90 Ib mm 440 Ib 90 Ib 7 250 Ib 45 Ib 250 Ib 45 Ib M TT A 227 ig 400N T 433 a 1 A 200 P 400 N 113 ko 200 N 1 0 200 N 113 kgr 1 f 250 Ibs F gt 150 Ibs i 150 Ibs U az gt 150 Ibs LU e gt 150 Ibs gt 113 kg 68 kg 68 1 68 1 68 kg 1001126742 B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG
45. AIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK DANGER DECALS SJ115982 Drive Elevation DANGER DO NOT DRIVE THE ELEVATED PLATFORM OVER UNEVEN TERRAIN OR OBSTACLES HIGHER THAN 2 INCHES Do not reach through scissors assembly when platform is raised without DEATH OR SERIOUS INJURY WILL one MM RESULT FROM IMPROPER USE OF Failure to avoid this hazard will result in death or serious injury THIS EQUIPMENT Proper use of maintenance support Maintenance Remove all material from platform Raise platform until there is adequate clearance to swing down maintenance SJ106406 Safety Bar DANGER Crushing Hazard 115982AB support Swing maintenance support down from storage bracket into a vertical position SJ1 19866 Remove hands and arms from scissors area A Lower platform until bottom end of maintenance support contacts labeled Pinch cross bar and scissors are supported by maintenance support Turn off main power disconnect switch To store maintenance support Turn on main power disconnect switch and start engine if equipped Raise platform until there is adequate clearance to swing up maintenance support Scissors 7 Swing up maintenance support into storage bracket Lower platform cross bar 106406AE LA 119866AF All original equipment manufacturer names part numbers and part descriptions are used for reference or i
46. AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG WARNING DECALS 1705089 Dual Capacity 5001 DOM MTB 1705168 Platform Capacity 1200 1350 d 500 Ibs FH amp 230 kg 000 bs Axles must be properly extended before lifting boom above horizontal or ss Ta mom A pee kg extending boom beyond 2ft 0 60m DOM DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 05168 D TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 500 105 230 kg Rae 2 1000 Ibs 450 ka RESTRICTED CAPACITY 1705089 B TIP OVER HAZARD Jg On units with inoperative or defaced capacity indicators do not exceed 500 pounds maximum platform capacity 1705336 Inspection 1350SJP 1705337 5 Tip Over BCS 1350SJP 1705387 Danger High Voltage THIS MACHINE MUST NOT BE
47. ARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury 1703805 Electrocution A DANGER 1703936 Danger CAN ADANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury CAN 1705695 Electrocution 1930ES All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARIS
48. ARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG INSTRUCTION DECALS 1706924 Finishing 1001094359 Troubleshooting ES FINISHING Read the Operation and Safety Manual 1001094359A Hook up lights and safety chains if equipped Control Select Fully retract and swing boom to align with tongue emergency Release stop to turn off Lower boom to boom rest Turn off engine fuel if equipped ONIHSINIA 1706924A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie
49. ATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK ILLUSTRATION PICTORAL DECALS SJ137988 Crush Hazard 137988AB All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHE
50. BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK CONTROL PANEL DECALS SJ111814 SJ130638 Emergency Stop SJ130434 Drive Lift Control Up Down EMERGENCY STOP AJ 111814AB ZZ 130434AC All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMERS SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CL
51. BLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1705175 Function Speed 1705174 Stop 4 1705175 B 500 Ib 230 kg MAX 1000 Ib 450 kg 1705174 C bts 1705190 Legend ENG 1705212 POWER Light Display CE EMERGENCY SYSTEM DISTRESS 1705212 0 1705309 Platform Legend 1350SJP AC GENERATOR ON Chassis Eug Platform Engi AC Glow PI Power Drive A Out of ngine LIN Low Fuel ow Plug Enable alor A Creep Capacity Distress Level Generator Indicator a i ar Z4 Orientation Jib Lift rds eee ON Stop UNE S 4 ystem Platform i Axle Soft i Boom sib stow Platform Cable vain 8 i Control xe AJ Out of 2 Break Telescope Extend d A Touch 2 Override Level Retract Override J HYH System 0 1705309 C 1705686 Legend 1930ES 1705429 p Drive Steer Instruction ENG FR ix LEVELING JACK ENABLE 1705351 Drive Steer Instruction DOM LEVELING JACKS SET SYSTEM Yellow light indicates the machine may Drive Steer in the opposite direction from Yellow light A indicates the machine may Drive Steer in the opposite direction from Le t moin jaune indique que l
52. D HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CONTROL PANEL DECALS 1706708 Legend Platform Power 6 Chassis Platform 5 AC Power Start Platform Out of Capacity Engine Generator Glow Plug Enable Emergency Select Level Level Indicator Distress ON Indicator Q 8 Indicator Sto Auxiliary 14 Function 1 F Soft Soft Platform Tower Articulating Main J A Speed Rotate X Telescope 8 Fly Boom Telescope Fuel Select Touch Touch Steer E d Control Override Indicator 1706708 8 1706712 Display Panel MTB 1706709 Legend MTB Battery Engine Engine Pydraulie Emergency Charging Intake CARE Condition Air Filter Filter Auxiliary EJ control ais Me Low Fuel Engine Malfunction Power T E Que CLR CHERE Der Indicator contol 1706709 A 1706751 Legend Select Warning Indicator Platform AC i CA Ji 1 ib Stow Steer Tilt Capacity Generator dee Z i i i n Override Jib Lift 0 Indicator ON M LS EN Function A Boom i 4 1 m Axle Su f e Start J Speed Platform f Control Extend Control Service Wait to i System Auxiliary M Control 7 Rotate 4 Select b 1 Retract start Warning St Power Al
53. DO NOT drive near drop offs holes or other hazards 7 employers work rules and applicable governmental regulations Make sure all tires are in good condition and air filled tires are properly inflated To drive on a slope boom must be retracted lowered below horizontal and centered between the rear wheels When Chassis out of level indicator light is on retract and lower boom and move machine Follow the Instructions in the Operating Manual the Manual to a level surface of Responsibilities and applicable standards for required inspections Driving with boom above horizontal or extended is restricted to smooth firm and level surfaces free of obstructions You must maintain a clearance of at least 10 feet between any part of the machine or load and any electrical line or apparatus charged up to 50 000 volts One foot additional clearance is required for each additional 30 000 volts or less Allowances must be made for machine movement and electrical line sway SERIOUS INJURY OR DEATH will result from contact or inadequate clearance TIP OVER HAZARD When CHASSIS OUT OF LEVEL indicator light is on retract and lower boom and move machine to a level surface Failure to follow instructions could cause SERIOUS INJURY OR DEATH Inspect the machine by performing the walk around and safety checks A When DRIVING observe the following listed on the checklist at the ground control station Direction
54. ET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE GENIE INSTRUCTION DECALS GN28165 GN30080 Footswitch Operation Max Load 500 Ib r INSTRUCTIONS Start Engine INSTRUCTIONS Maximum load 500 Ibs 227 kg Maximum occupants 2 Operate Functions Occupants and equipment must not exceed 500 Ibs 227 kg Stop 28165 C GN72970 Charger Operation EM INSTRUCTIONS Battery Charger Operating Instructions Observe and Obey To Charge Battery Do not operate the machine with discharged Be sure battery pack is connected before charging batteries batteries Open battery pack compartment Compartment must remain Do not operate machine with battery charger open for the entire charging cycle plugged in Remove battery vent caps and check battery acid level If Do not use
55. ETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CONTROL PANEL DECALS 1704480 Legend 1704484 Platform Display DOM EMERGENCY dae Ai STOP AUXILIARY POWER T ENGINE DISTRESS 1704484 F ENGINE SPEED 1704485 Platform Display LIGHTS Q 5 J FUNCTION ENABLE 1704485 F 1704487 Platform Display DOM 750lbs PLATFORM EXTEND RETRACT Qo PLATFORM EXTENSION SELECT 1704487 HYDRAULIC LEVELING JACKS 1704502 Symbol Legend for Crawler XN Start Drive Platform d Hispan Engine Low Fuel UK Glow Plug Enable Berney 0 n gn Select Disable qun este Distress Level ON Indicator 8 Indicator Stop L Auxiliary xD 2 Power Control Function A i Soft te i Platform Tower Articulating Main uv 5 o Soft Touch r Counter Drive Sheed yy Rotate 8 sA Telescope Telescope Fuel Select Touch Indicator 8 BIG Rotate el Steer Fly Boom Override VA AN 1704502 C All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and
56. G PROPERLY Do not operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual and authorized to operate this machine Your training includes reading and understanding the JLG safety and operation manuals for this model and knowing your employers work rules and applicable governmental regulations Follow the instructions in the Operating Manual the Manual of Responsibilities and applicable standards for required inspections Do not replace items i e Batteries wheels counterweight etc with items of different weight or specification because this will affect stability of machine Do not modify or change machine without written approval from manufacturer Operate this machine with extreme caution STOP all operation if malfunction occurs Improper use of this machine could cause death or serious injury 400 LBS 180 kg 350 LBS 160 kg 350 LBS 160 kg Wo T G e SG RIKKA EXTENSION PLATFORM K ALL OTHER SEK PLATFORMS SP PLAT 1001117185 A When DRIVING observe the following Direction of travel reverses in the relation to controls motion when boom is over front steer axle To drive on any slope boom must be retracted lowered below horizontal and centered between rear wheels Do not drive up or down grades exceeding machine gradeability or side slopes exceeding 5 Machine must be assisted towed up or down grades exceedin
57. HE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CAPACITY DECALS 1705640 Capacity 10001b 454kg 1705641 Capacity 1000lb 454kg MAX CAPACITY 1000 Ibs 454 kg dedo PT 1000 Ib 454 kg BA MAX 150 Ib 667 N 1705640 A MAX CAPACITY MAX CAPACITY 1000 Ibs 454 kg ddp 700 Ibs 317 kg E a 1000 Ibs 454 kg 700 Ibs 317 kg 1705647 1705699 Tire Load 13651b 620kg MTB 50015 Capacity 1930 MAX e LJ gt me 500 Ibs 227 kg MAX 1365 Ibs CD wes gt lt L gt 1705647 B 620 kg AES MAX 2150 LB 667 N MAX 105 LB 467 N a lt i LO e N 1705880 1705941 Capacity 5001b 227kg 8001b 363kg Capacity 5001b 227kg 8001b 360kg Zone A MAX CAPACITY MAX CAPACITY MAX CAPACITY MAX CAPACITY 8001bs 363 kg 500 Ibs 227 kg pf 800 1bs 363 kg ff 500 1bs 227 kg qe m mr m 800 Ibs 363 kg 500 Ibs 227 kg 800 155 363 kg 500 Ibs 227 kg 1705880B 1705941B eL 11 MAX 120 LB 533 N MAX 100 LB 445 N MAX 120 LB 533 N MAX 100 LB 445 N All original equipment manufacturer names part numbers and part descriptions are used for reference
58. HETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CAPACITY DECALS 1703996 5001b 230kg Max Capacity 23 230 kg 500 Ibs MAX 1703996 B 1704399 Wheel Load 1932E2 MAX 4 1050 LBS 480 Kg 1704399A 1704201A 1704540 Storage Capacity 1704445 Max Tire Load 1704540 A 1704828 Max Tire Load 83501b MAX 3788 kg 8350 Ibs 1704827 Max Tire Load 62001b MAX 2812 kg 6200 Ibs 1704827 A 1704828 A 1703960 Max Wheel Load 17 755 lbs 1703960 B 1704201 Capacity ANSI 1704403 Wheel Load 3246E2 1900 LBS 1704752 Max Tire Load 72001b MAX 7200 5 3266 kg 1704752 B 1703870 Wheel Load 1932E2 2 480 k 9 1050 5 1703870A 1704134 Tire Max MAX 4 1660 LBS 755 Kg 346 1704401 Wheel Load 2032E2 CE MAX x 1800 LBS 1704559 Max Tire Load MAX 2600 Ibs 1180 kg All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered tr
59. IGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG ILLUSTRATION PICTORAL DECALS 1705692 1706100 Control Box Location 1705828 Gooseneck 10 Footswitch CE 1705693 Safety Prop P 1705693 A 1705692 A 1706170 Gooseneck 6 1706350 Cover 1706670 1706263 1230ES Manual Descent Brake Set P 1706350 B 3251102 Generator 3252768 1706741 Lift Diagram 450A DOM Boom Control Select m lt 1 N ys 3252768 C N eo 4100181 4108302 3252781 Hydrualic Oil Hydraulic Oil Level Lift Diagram 800S DOM MODELS T 5 Gr 155em 3252781 C 4100181B 1 4108302 J All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color
60. IN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1707111 1707113 Platform Display DOM Platform Display EURO 1000 LB MAX 450 KG MAX 1707111 D 1707113 D 3252542 3252602 Controller Lid Box Lid w Tilt amp BD OA 5 5 0 O 5 l 3 Cu mu 3252620 Controller Box Lid C 3252602 E a 4107462 Side Console 4107462 3252620 B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREB
61. ING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1701504 Hydraulic Oil 1701504 1701529 Arrow 1702155 Battery Disconnect 1702155 1703697 Safety Prop 1703697A 1701502 Hydraulic Oil Level High 1701502 A 1701500 1701518 Crushing 1701644 Battery Charger 1701644 1703687 Arrow JLG ILLUSTRATION PICTORAL DECALS 1701500 Lift Here 1701509 Manual 1701509 B 1701640 Manual E 1701640 1703162 Fan Blade E 1703162 B 1701499 No Tie Down Lift 1701499B 1701505 Diesel 1701505 1701542 Gasoline GASOLINE PETROL ESSENCE BENZIN BENZINA 1703072 No Forklift All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG J
62. IONS Death or serious injury can result from contact or inadequate clearance to electrical power lines and apparatus Maintain 10 feet minimum clearance from electrical power lines and apparatus Allow for sway rock and sag AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY 0323896 0323899 0323897 SN190989 Do Not Reach DANGER P DO NOT on REACH THROUGH HOLES 19 0989 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG
63. JLG CONTROL PANEL DECALS Drive Orientation 1001108492 A Drive Orientation 1001108493 A Drive Orientation 1001108494 A BOOM MALFUNCTION Drive Orientation 1001108495 A Auxiliary Power Start Auxiliary Power Start Auxiliary Power Auxiliary Power 8 4 Power top Counter Rotate Emergency 5 OH Enable 8 Indicator 90 Touch Indicator Enable Indicator Touch Indicator Enable Q Indicator WEE Soft Touch Indicator Enable 6 8 Indicator 90 Soft Touch Indicator Glow Plug oo Indicator Touch Override Glow Plug Indicator d A Soft Touch Override Glow Plug Indicator gd Soft Touch Override Glow Plug Indicator d A Soft Touch Override AC Generator ON Fuel Select AC Generator ON Fuel Select AC Generator ON Fuel Select AC Generator ON Fuel Select Platform Capacity Indicator System Distress A p Articulating Fly Boom Main Telescope Telescope Platform Capacity Indicator System Low Fuel Distress Telescope 1 p Articulating 4 Telescope Fly Boom Platform Capacity Indicator System Low Fuel Distress Level 1 Main p Articulating 4 Telescope Fly Boom Telescope Platform Capacity Indicator System Low Fuel Distress Level t Main Telescope 1 0 9 Articulating Fly Boom Telescope Chassis Out of Level Platform Rota
64. JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG WARNING DANGER DECALS 1705797 Warning Danger Platform A DANGER 1702785 Warn 1 ng Da nger This machine is not insulated 9 Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Sas A hens ELECTROCUTION HAZARD
65. L NE NE UN SJ132713 Wheel Load SJ137988 Crush Hazard SNORKEL IN DEX Description Page Number en Blue Arrow 65 Diesel Fuel 7 2 s Danger Electric Hazard 64 Danger Do Not Operate 64 Platform Capacity 650 62 Danger Foam Solid Tires 64 Rotate While Greasing 66 Inspect Wire Ropes 66 E Danger Electric Tipping Hazard e SN0074210 SN0080650 Lift 65 SN0083426 Tie Down Symbol SN0083431 Lift Tie Down Location TB60 Platform Capacity 500 Platform Control Box Front Machine Complies With ANSI Danger Electric Hazard Danger You Must Not Operate Danger Electric Hazard Danger Do Not Reach KE SN0070922 Platform Rotator Form No CMP DECAL 1112 Part No 401004 R012813 Printed in USA JLG Industries Inc 1 JLG Drive McConnellsburg PA 17233 9533 Telephone 717 485 5161 Toll free in US 877 JLG LIFT Fax 717 485 6417 www jlg com An Oshkosh Corporation Company
66. LATFORM CAPACITY 650 Les 500 Les 0073085 0090589 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SNORKEL CONTROL PANEL DECALS SN0180846 Platform Control Box Front
67. LECTROCUT ZARD OTATE WHILE GREASING CR CHINE S NOT 0073492 ALLY INSULATED n result from to ous injury 3 crass out o evel Ke ep awa Stabilizers Outriggers INSPECT WIRE ROPES HERE Placer les mains cet endroi DES BLESSURES MINEURES 0 2013 Decal Catalog CONTENTS Genie 800 4 Illustration Pictoral Decals 6 Instruction Decals 7 Warning D 8 z ety MT 7 Miscellaneous Decals 9 JLG Capacity Decdlso cnm 10 Important Decals 40 Caution Decals 16 Instruction Decals 41 Control Panel Decals 0000000 17 Miscellaneous Decals 43 Cosmetic DEAR ss 33 Warning 106601 45 Danger edi e cese ain 35 Warning Danger Decals 5 Illustration Pictoral Decals 36 Skyjack Capacity Decals 54 Warning Decals 6 Caution Decals 55 Control Panel 56 Danger DE 57 Illustration Pictoral Decals 58 Miscellaneous Decals 60 CONTENTS Snorkel Capacity Dee Control Panel Decals Danger else Illustration Pictoral Decals Miscellaneous Decals ER 68 JE 9 OCC 74 SHOE Kel Sse e 29 For More Information Visit us online at onlineexpres
68. LG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG ILLUSTRATION PICTORAL DECALS 1703819 Direction Arrow 1703819B 1704125 1704260 Air Lead EMS Euro Requirement 300 psi 20 7 bar B a 1704125 A 1705096 Lift Diagram 1200 1350 E ite 9 e o o O e _ gt 38 11 11 86 m 1350SJP 1100SB 34 11 10 64m 1200SJP 27 9 8 46 m 135
69. LG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMERS SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 34 NUS 1877 6 27 wwwjlg com JLG DANGER DECALS DANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury 1703823 B DANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part
70. Load 5 E l 1705753 B 1705912 Platform Box e 17059128 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1705913 1705914 Platform Display Platform Box
71. NING DECALS 1707015 Dual Capacity 3252347 Footswitch 4110422 TIP OVER HAZARD Swing Loads Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 500 lbs 230 kg UNRESTRICTED CAPACITY DEATH OR SERIOUS INJURY COULD SWINGING LOADS could cause MACHINE TIPOVER which could result in death or serious injury RESULT IF FOOTSWITCH IS DISABLED BLOCKED OR INOPERATIVE e ALWAYS travel slowly rig properly use two tethers 100 Ib 450 N US ONE 750 los fit 340 kg 2 DOM RESTRICTED CAPACITY 1707015 B 3252347 B 90555027 Warning Decal 91143282 91143284 Warning Decal Warning Decal READ AND UNDERSTAND THE FOLLOWING PRIOR TO LIFTING PERSONNEL WHEN LIFTING PERSONNEL USE ONLY A JLG MANUFACTURED PERSONNEL WORK PLATFORM DO NOT DRIVE MACHINE WITH PERSONNEL IN PLATFORM WHEN PERSONNEL ARE IN PLATFORM REMAIN SEATED IN CAB WITH PERSONNEL LEAD ACID BATTERIES PRODUCE FLAMMABLE AND EXPLOSIVE GASES STAY CLEAR OF PINCH POINT AREA BOOSTER BATTERY OR CHARGING BATTERIES ANYTIM E ENGINE IS RUNNING DO NOT USE SMOKING MATERIALS NEAR BATTERIES BEING IN PINCH POINT AREA COULD WEAR SAFETY GLASSES FROM BATTERIES CAUSE SERIOUS INJURY OR DEATH SAT PROPER LEVEL IN EACH GELE O nonar FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DAMAGE TO THE 9114 32
72. ORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1703924 Warning Platform CAN DANGER ELECTROCUTION HAZARD DANGER RISQUE D ELECTROCUTION Cette machine N EST PAS isol e Maintenir une distance d au moins 3 m 10 ft entre la machine et tout appareil ou ligne lectrique This machine is NOT insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and Le non respect de ces in
73. PLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SNORKEL MISCELLANEOUS DECALS SN0070922 SN0073667 Platform Rotator Inspect Wire Ropes SN0073492 Rotate While Greasing N S P ECT WIRE ROPES HERE ROTATE WHILE GREASING 0073492 0073667 SN0074209 Pre Start Instructions Booms INSTRUCTIONS SN0181562 e AT THE START OF EACH WORK SHIFT PERFORM THE DAILY Machine Complies With ANSI INSPECTION amp MAINTENANCE DESCRIBED IN THE OPERATOR S MANUAL This machine is manufactured in compliance with e SEE THE OPERATOR S MANUAL FOR CORRECT USE OF THE CONTROLS ON THE GROUND CONTROL PANEL e SEE THE OPERATOR S MANUAL FOR COMPLETE OPERATING AND STARTING PROCEDURES ANSI A92 5 or A92 6 section 4 0181562 0074209 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not
74. PPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1702387 Platform Display 1702565 1702564 Drive Steer 0 d Stop O 1702387 H 1702565 B 1702566 1702567 Lift Swing Function Speed 1702566 B 1702610 Ground Control Display 1702676 Horn 1702676 D 1702610 C 1702784 Legend E tart Platform pde Elation Engine Low Fuel Glow Plug Enable Power ut of Capacity A Generator Emergency Level Ind
75. RESSES ORIMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE GENIE DANGER DECALS GN97547 Electric Hazard A DANGER ELECTROCUTION HAZARD Death or serious injury will result from contact with this machine should it become electrically charged KEEP CLEAR See service manual Engage safety arm before performing maintenance or repair GN82561 Use Safety Arm DANGER j Crushing Hazard Death or serious injury can result from contact with moving scissor arms 82561 B GN97890 General Safety Rules A DANGER Failure to read understand and obey the operator s manual and the following safety rules will result in death or serious injury Improper Use Hazard Do not alter or disable machine components that in any way affect safety and stability Do not push off or pull toward any object outside of the platform The operator is responsible for safe machine oper
76. RISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE GENIE MISCELLANEOUS DECALS GN28164 GN28176 GN43093 Hazardous Materials Manual Not Here Tire Specs NOTICE If Safety Manual Tire Size aia eden Operator s Manual 12x 4 7 GN43619 materal are used on Ihiliti Safety Arm this machine or Responsibilities Castle Nut Torque Gasoline Manual are missing 300 5 407 Nm contact local Genie in i Safety Arm oo distributor or Genie Antifreeze ro erl installed 43619 017A Industries pM 28164 1160 28176 D 43093 B GN44753 GN43647 LED Readout Maintain firm grasp on platform rails when pulling snap pins Do not allow platform guard rails to fall Crushing Hazard Falling guard rails could cause injury 52494 B GN52494 Crush Hazard Rails LED Diagnostic Readout Refer to the appropriate Engine Idle Select Rabbit and foot switch s S ol foot switch activated high id Turtle Symbol low ie Rabbit Symbol high idle Check Engine Light if equippe
77. RODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1703084 Platform Display CE 1703078 Speed Drive Platform Chassis Power 5 Engine Up Out of Emergency i Stop Distress N Choke Deck Axle Extension eT Steer Drive C Start Lock 1703084 1703465 MTB 1703678 1703689 Horn Drive Speed Level Horn Drive Speed Level 1703695 Chassis Power Out of Emergency Level Stop Deck EON Mu Extension dm IDs 1703695C 1703465 G 1703706 Ground Control 1703808 Legend MTB 1704192 Be Stop Es ES AIT ye B coe Stop Condition Temperature Air Filter Filter Indicator 7 B D SL m Platform a ner HR Engine Engine Transmission Engine Auxiliary W 9 Control oid Oil Oil eine Malfunction Off 4 Level Power E Ground Pressure Temperature Er Filter Indicator Control 1703808 C 1703706B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structure
78. S FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE GENIE ILLUSTRATION PICTORAL DECALS GN27204 GN27205 Arrow Blue Arrow Yellow GN27206 GN27207 Triangle Blue Triangle Yellow 27206 B GN28171 GN28174 No Smoking Power To Platform GN27867 Swivel Lock Swivel Lock GN40434 Lanyard Anchorage Point 40434 E 230V AC 10A GN43618 GN44980 Direction Arrows Power To Charger 115V GN52475 43618 B atr Transport Tiedown 115V AC 15A 44980 D 52475 C 43618 B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES S
79. T FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES ORIMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CAUTION DECALS 1702294 eas 1702868 No Hands NO HANDS OR LANYARD IN MINOR OR MODERATE INJURY 8 PLACING HAND HERE MAY RESULT 8 FR NO HANDS OR SAFETY BELT PLACING HANDS HERE MAY RESULT IN MINOR OR MODERATE INJURY 1704000 No Hands CAN Placing hand h 13 NO HANDS OR LANYARD MINOR OR MODERATE INJURY TENIR MAINS ET Placer les mains cet endroit peut provoquer SANGLES AL CART DES BLESSURES MINEURES OU B NIGNES 1704000 C All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SU
80. THER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK MISCELLANEOUS DECALS Checklist Emergency Lowering Operator s Checklist rg AT EMERGENCY LOWERING PROCEDURE beginning of each shift de em rgeney controls 1 Turn main power disconnect switch to O off position I Personal protective devices Locate holding valve manual override knob at the bottom of lower lift cylinder Tires and wheels 1 Outriggers if equipped and other structures To override valve push and turn knurled knob counterclockwise Ll and fuel system s if equipped for To override upper lift cylinder valve if equipped use access rod located on top of base eaks s Loose or missing parts push and turn counterclockwise Jj Cables and wiring harnesses Before lowering confirm that all lift cylinder valves are in override position LI Labels warnings and operating manual s i N Guardrail system To lower platform locate emergency lowering pull valve on hydraulic tray and pull dt Note Before normal operation can be resumed holding valve manual override knobs Jj Hydraulic oil level on lift cylinders must be pushed and turned clockwise to engage the holding valves A 109442AF 106691AC 110V AC Outlet CONNECT PLATFORM A C SUPPLY HERE
81. The ps ive ful dish will not operate travel with auxiliary pow Genie service manual for code descriptions 44753 017A GN82567 GN82366 Ground Control Panel Chevron Rando GN82239 Latch Chevron GN65052 Rando HD Fault Codes equivalent only ECM Fault Codes 82239 A Code Condition Condition Normal 01 Internal ECM Error 02 ECM Platform Communication Error Undefined Platform Dip Switch Setting Chassis Up Down Toggle Closed at Startup Pothole Guard failure Platform Left Turn Switch Fault Platform Right Turn Switch Fault Platform Drive Enable Switch Fault Platform Joystick Fault Forward Coil Fault Call Genie Industries for list of equivalent and optional oils 82366 C Reverse Coil Fault Up Coil Fault GN82447 Auxiliary Lowering Right Coil Fault Left Coil Fault Brake Coil Fault Parallel Series Coil Fault Low Battery Voltage Off Level Overload Putout Option For more information please consult the appropriate Genie Service Manual 65052 G Auxiliary Lowering 82447 B 82567 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to
82. URN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT S nr i TURN BRAKE CAMS TO HORIZONTAL USING 3 4 WRENCH DISENGAGE BRAKE BEFORE WINCHING OR TOWING TURN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT 3 WINCH OR TON gd 5 ENGAGE DRIVE MOTORS DISENGAGE BRAKE BEFORE WINCHING OR TOWING 1704017B User Flash Codes Release joystick controller allow to return to center wait 5 seconds and follow steps 4 amp 5 Function speeds may be slow Lift up and telescope out may be prevented Fully retract boom lower boom and reset outriggers Push Emergency Stop to shut machine off Wait 5 seconds and follow step 2 Battery may need recharged Push Emergency Stop to shut off wait 5 seconds follow step 2 and check battery level 1706897A TOW OR WINCH SLOWLY 2 M P H 3 2 K P H MAX 2 RELEASE PARKING BRAKE TURN BRAKE CAMS TO HORIZONTAL USING 3 4 WRENCH M 1706897 Quick Reference Quick Reference Getting Started Read the Operation and Safety Manual Perform Pre Start Inspection 1 Flash Turn Emergency Stop clockwise to release 2 Flashes 4 Flashes gt Move Joystick 5 Flashes to operate function J 1703698C STEP Raise boom from 12 032119915 ONILLAS J Extend boom out i and lower boom to ground Platform Control Platform 1706890A TOW OR WINCH SLOWLY 2 M P H 3 2 K P H MAX 5 ENGAGE DRIVE MOTORS TURN VALVE KNOB
83. Y EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1001091272 Icon DOM 4110188 Overlay LH EE TE LE T L WARNING RUN OVER HAZARD could cause death or serious injury WARNING MACHINE ROLL AWAY could cause death or serious injury 0 Before dismounting 8 Engage park away while brake gt P Lower boom Use all mirror s to ground Look in path of travel Stop engine Failure to comply Operator must be trained and Fasten could result in I must read and understand t AWARNING death or all capacity charts operator serious injury and safety manuals X 65 1001102601 MTB 600 41101880 1001107527 Stop D 1001107527 A 1001102601 B 1001107849 1001107850 Platform Display Platform Display 1000 LB MAX 1000 LB MAX 450 KG MAX 450 KG MAX 1001107849 D 1001107850 D All original equipment manufacturer names part numbers and part descriptions are used for reference or identi
84. ademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE MAX MAX 500 LB 335 LBS 227 kg 1490 N 1705020C 1705042 Max Load Jacks 1705059 Dual Capacity 5001 5 MAX 365 kg 800 Ibs 4400 Ibs 1995 kg 1705042A 1705059 1705181 Dual Capacity 7 24 Ibs Le 0 UNRESTRICTED CAPACITY T 1705181 C 100 1b 450 N MAX Ibs 1000 gt TT 1705639 Capacity 8001b 363kg MAX CAPACITY 800 Ibs 363 kg 99 A TUA 800 1b 363 kg 120 1b 533 N 1705639 A JLG CAPACITY DECALS 1705020 Capacity 22501b 1020kg EXT MAX 2250 LB 1020 kg 1704829 Max Tire Load
85. arance from electrical power lines and apparatus TIPPING amp FALLING HAZARD Do not exceed the unrestricted platform capacity shown on the platform Do not operate this machine on soft or unstable ground Only operate this machine on flat level ground This machine is equipped with foam filled or solid tires wheel weight is critical for stability To prevent machine tip over replace tires with factory approved foam filled or solid tires ONLY DO NOT attempt to inflate foam filled or solid tires Do not use machine as a crane hoist or jack and do not position machine against another object to steady the platform Do not use machine if not functioning properly or damaged in any way Do not modify or alter this machine 0073298 See Operator s manual for other hazard information 0074210 SN0323897 SN0323899 SN0323896 You Must Not Operate Electric Hazard A DANGER ADANGER ELECTROCUTION HAZAR D THIS MACHINE IS NOT KEEP CLEAR ELECTRICALLY INSULATED Death or serious injury can result from touching this machine if this machine is in contact with electrical power lines or apparatus DANGER YOU MUST NOT OPERATE THIS DEVICE UNLESS 1 YOU HAVE BEN TRAINED IN THE SAFE OPERATION OF THIS DEVICE AND 2 YOU KNOW AND FOLLOW THE SAFETY AND OPERATING RECOMMENDATIONS CONTAINED IN THE MANUFACTURER S MANUALS YOUR EMPLOYER S WORK RULES AND APPLI CABLE GOVERNMENTAL REGULAT
86. arge cycle is complete when 100 LED is lit Any other reading indicates that the charge cycle is not complete If the abnormal LED is lit consult the Operators Manual Charger will shut off automatically when batteries are fully charged Depleted batteries will take approx 17 hours to charge DOM 1704446 B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMERS SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL
87. ation This includes 1 Avoid hazardous situations Ba natal oah 2 Always perform a pre operation inspection tn ay paral he hs 3 Always perform function tests prior to use Do not place ladders or scaffolds in 4 Inspect work place platform or against any part of this 5 Only use the machine as it was intended machine Do not use this machine on a moving or mobile surface or vehicle You sai ES end ed ue Be sure all tires are in good condition air filled tires are safely and operators manuals and decals properly inflated and lug nuts are properly tightened employer s safety rules Fall Hazards applicable governmental regulation Occupants must wear a safety You are properly trained to safely operate this machine belt or harness in accordance 8 with governmental regulations Electrocution Hazards Attach lanyard to anchor This machine is not electrically provided in platform insulated and will not provide Do not sit stand or climb on protection from contact with or the platform guard rails proximity to electrical current Maintain a firm footing on the platform floor at all times Minimum Safe Approach Distance Do not climb down from the platform when raised Lower the platform entry mid rail or close the entry gate before operating Do not operate unless Voltage Phase to Phase 10 15 200KVtossoKV 1 Collision Hazards E Be aware of limited sight distance and blind spots when driving or operating
88. certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CAPACITY DECALS 1701645 5001b Max Capacity 1702688 1702966 8 5 0 0 Ibs 1 50015 Capacity 50015 Capacity z 500 Ibs UNRESTRICTED TT 230 Kg 500 LBS MAX CAP 500 LBS caraciry sus 100 Ib 450 N UNRESTRICTED CAPACITY MAX DOM 1701645 E 1703469 1703470 1703472 1703475 Max Tire Load Max Tire Load Max Tire Load Max Tire Load MAX MAX MAX MAX 5216 kg 5352 kg 6441 kg 7870 kg 11500 Ibs 11800 Ibs 14200 Ibs 17350 Ibs 0 1703469 B 1703470 B 1703472 B 1703482 1703486 1703488 1703493 Max Tire Load Max Ti
89. d Light on ado engine stopper i Tag Dot on d ine ue Bs runnii cina Contact service personnel within 24 hours After Each Use andle to Park machine on a firm level surface os m unauthorized use Operate Instructions NOTICE To Position Platform Extend axles if equipped Operation from ground Hold B function enable switch to either side Operation from platform Move lift drive select switch to lift position if Starting The Engine Turn key switch to ground or platform control Be sure both ground and platform red Emer n pd s OS are pulled oi Gasoline sp ide ced rene by e nh ed Press down foot switcl mo control Mi fe indle or to case ording to markings ol Send To Drive and Steer Move lift drive select switch to drive position if equipped Press down the foot switch cel e er or rel ease foot nn h Turn steering wheels with the thumb ri f drive Chock wheels moving fuel select switch to desired position Move start toggle switch to either side Emergency Stop Push in red Emer gen nor Stop mE to stop all function engin off Selecting and operating gra und rols will override platform red ergency Stop Bun Auxiliary Controls Use auxiliary power only if primary power ine 5 Pull out red Emergency Stop button to on position contr ia handle simultaneously hola aula g power switch oi and drive cl 5 function Vien hi ies 5 raci n machine will
90. d close entry gate before operating Crushing Hazards Keep hands and limbs out of scissors Use common sense and planning when operating machine with controller from ground Maintain safe distances between operator machine and fixed objects Collision Hazards Be aware of limited sight distance and blind spots when driving or operating Check work area for overhead obstructions or other possible hazards Be aware of crushing hazard when grasping the platform guard rail Observe and use color coded direction arrows on the platform controls for drive and steer functions Explosion Hazards Do not start engine if you smell or detect liquid petroleum gas LPG gasoline diesel fuel or other explosive substances Do not refuel the machine with the engine running Damaged Machine Hazards Do not use a damaged or malfunctioning machine Be sure all maintenance has been performed as specified in the appropriate operator s and service manuals Be sure all decals are in place and legible Be sire safety operator s and responsibilities manuals are completed legible and in the storage A DANGER Failure to read understand and obey the operator s manual and the following safety rules will result in death or serious injury machine is on firm level ground GN43091 General Safety Improper Use Hazard The operator is responsible for safe machine operation This includes 1 Avoid hazardous situations 2 Always perform a pre op
91. d the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG MISCELLANEOUS DECALS 3252761 120V 120V AC 3252761A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certa
92. de Force ANSI INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS Battery Connection Diagram Maximum allowable side force Batteries 4 Group GC2 Annual inspection rate on platform Nominal required na 150 Ibs 667 N 20 hour rate 225AH ne Dimensions Maximum allowable wind speed inspection report ix wxh rein 28 mph 12 5 m sec 82559 B 0 117 in 82657 B 97887 B All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE
93. dentification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK ILLUSTRATION PICTORAL DECALS SJ102894 Fork SJ102896 Fork Lift Boot 4 Em SJ105983 On Off C M d SJ116577 SJ119674 SJ124362 Torque Hi Low Emergency Battery Disconnect Do Not Wear SJ123628 Operator s Man
94. e Load 18351b 832Kg 4 48 1706386 Warning Fall Hazard 1706387 Warning Crushing Platform 48 Part Number 4 22 47 47 22 1705173 1705174 1705175 1705178 1705181 1705190 1705212 1705303 1705309 Platform Legend 1350SJP Warning Inspection 1350SJP Warning l ip Over BCS 1350SJP Drive Steer Instructions DOM Load Management BCS 40 1 CSA 3 1705336 i 1705337 1705351 1705365 240V 60HZ 43 j 13 13 47 47 35 22 1705374 1705375 1705387 1705429 1705460 1705492 1705638 1705639 1705640 1705641 Legend 1930ES 1705647 1705679 1705680 1705681 1705686 1705692 Control Box Location 38 23 1705755 MTB CE 800A 1705693 1705694 1705754 JEG 3 3 3 1705781 JLG Logo 2 75 33 Part Number Description Page Number 3252689 Capacity UT 3252694 Capacity 8001b 365kg 5252751 Capacity EXT Deck C D L B 3252752 Capacity EXT Deck C D L B J aN iN 3252761 120V 3252768 Lift Diagram 450A DOM Q2 Oo 3252781 Lift Diagrm 800S DOM Q2 Oo 4100181 Hydraulic Oil U1 4105262 Boom Angle Indicator 4107462 Side Console ND CO Q2 U1 Q2 oo 4108302 Hydraulic Oil Level N NO 4110188 Overlay LH Lift Point Tie Down Oo NO 4110226 4110422 Warning Swing Loads O 90553027 Warning Decal 91143282 Warning Decal
95. e sens de translation direction de la machine peut tre invers par rapport au sens du mouvement des commandes movement of controls Faire correspondre les fl ches de direction noires et blanches sur le tableau de commande de la plate forme et sur le ch ssis pour d terminer le sens de Match black and white direction arrows on both platform control panel and the chassis to determine the direction d placement 06 machine the machine will travel Appuyer sur l interrupteur de Push and release Drive direction de translation movement of controls Match black and white direction arrows on both platform control panel and the chassis to determine the direction the machine will travel Push and release Drive Orientation Override LEVELING JACKS RETRACTED switch Within 3 slowly move the Drive Steer control toward the arrow matching the intended Orientation Override 9 switch Within 3 seconds slowly move the Drive Steer control toward the arrow matching the intended direction of machine travel PLATFORM EXTEND RETRACT prioritaire U et le rel cher Dans un d lai de 3 secondes d placer lentement la commande de translation direction vers la fl che direction of machine travel correspondant au sens de d placement pr vu de la machine 1705351 B 1705429 A PLATFORM EXTENSION SELECT 1705686 A All original equipment manu
96. eed 500 pounds maximum platform capacity DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 1704995 E 1704995 1704479 l Battery 7501 5001 Capacity Platform 1 nh g 200 lbs E ERE HAZARD nu No flames smoking or sparks om 7 c 520 ko TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console On units with inoperative or defaced capacity indicators do not exceed 500 pounds maximum platform capacity DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 1705088 C e 500 5 TT amp 230 kg JLG WARNING DECALS 1704096 Dual Capacity DOM 500 Ibs TT amp 530 kg UNRESTRICTED CAPACITY 100 450 N 1000 lbs Ax 450 kg ANSI 1704340 Battery Ventilation CAN 1000 Ibs EXPLOSION FIRE HAZARD Charge batteries in well ventilated area free of flames smoking or sparks Failure to follow warning could cause death or serious injury 1704104 C DOM RESTRICTED CAPACITY 1705088 Dual Capacity 5001 DOM 100 450 N 1000 los ue D PPP 450 kg RESTRICTED CAPACITY 2 1704996 D UNRESTRICTED CAPACITY RESTRICTED CAPACITY 1703984 Foot Switch CAN Death or serious injury could result if foot switch is disabled blocked or inoperative Un interrupteur a p dale hors service bloqu ou inop rant constitue un danger de mort
97. eir respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG WARNING DECALS 1706111 1706135 Machine Operation Spend init nspection f peed Limi WARNING Improper Use Hazard Read and understand Operation and Safety Manual and all decals before use You are required to comply with Do not tow trailer until it is inspected and operating properly all local regional and national D O N OT EXC E E D DO NOT operate this machine unless you have been properly CHECK BEFORE TOWING requirements for trailer operation trained as described in the JLG Operation and Safety Manual DA rernm LEE including brakes consina an 65 M P H S D RO can macte any additional equipment t
98. eration inspection 3 Always perform function tests prior to use 4 Inspect work place 5 Only use the machine as it was intended Do not operate unless You read understand and obey manufacturer s instructions and safety rules safety and operators manuals and decals employer s safety rules applicable governmental regulation You are properly trained to safely operate this machine Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current Minimum Safe Approach Distance Voltage Distance Phase to Phase Meters 0 to 7 Avoid Contact 300V to 50KV 3 05 50KV 4 60 200KV to 7 6 10 350KV to 500KV 7 82 500KV to 67 10 67 750KV to 67 13 72 Tip over Hazards Do not raise platform unless avoid drop offs holes and unstable or slippery surfaces Models without outriggers Do not raise platform unless machine is on a level surface Models with outriggers Do not raise platform unless machine is level Do not operate machine in strong gusty winds Do not increase surface area of platform or load Increasing area exposed to wind will decrease machine stability Do not drive machine on or near uneven terrain unstable surfaces or other hazardous conditions with the platform raised Do not place or attach overhanging loads to any part of this machine 43091 F Raisin
99. es are properly inflated Operate this machine with extreme caution STOP all operation if a malfunction occurs Check all functions at ground control and platform control stations Select an area free of obstructions 9 Follow the Instructions in the Operating Manual the Manual of Responsibilities and applicable standards for required inspections Read and understand decals and placards If this machine is not properly maintained death or serious injury could occur 1705336 B Failure to follow instructions could result in serious injury or death 1705337 A 1705680 Tip Over Crushing Fallin 1705679 pi 1705492 Inspection Platform Tip Over Platform 7 TIP OVER HAZARD Do not exceed platform rated capacity or rated number of people Evenly distribute load Do not expose platform to high winds or horizontal forces Machine must be on smooth firm and level surface before elevating platform Do not drive with platform raised or raise platform when on uneven sloping or soft surfaces including trucks trailers railway cars floating vessels scaffolds or similar areas THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY TIP OVER HAZARD Installing or removing approved accessories or changing platform size requires recalibration of the boom control system e Reference the Service amp Maintenance Manual for proper procedures Do not operate this mac
100. external charger or booster battery necessary add only enough distilled water to cover the plates Recharge batteries after each work shift Do not overfill prior to charge cycle Use proper AC input voltage for charging as Replace battery vent caps indicated on charger Connect the battery charger to a grounded AC circuit Use only Genie authorized batteries and charger If charger does not come on press and hold low voltage start Do not expose charger to water or rain switch if equipped The charger will automatically shut off when charging cycle is complete Check battery acid level when charge cycle is complete 72970 C Replenish with distilled water to the bottom of the fill tube Emergency Stop Operation To Position Platform After Each Use Push in red Emergency Stop Turn the key switch to ground Move the toggle switch Park machine on a firm button to stop all functions control according to the markings on the level surface and turn machine off Pull out ground red control panel Remove key to secure from Emergency Emergency Stop buttons to Drive and steer functions are not unauthorized use the on position available from ground controls Lowerin Be sure battery switch is Move toggle switch OR pull connected before operating knob OR push button to machine lower platform 43089 F Chock wheels Charge batteries INSTRUCTIONS GN82559 GN82657 GN97887 Annual Inspection Required Battery Connect Max Si
101. f pinch points EXPLOSIVE GASES could cause death or serious injury 1706296C DO NOT TRAVEL with personnel in work platform 1706306 1706385 Tip Over Hazard Drop Bar Y FALL HAZARD could result in DO NOT drive DO NOT raise 4 MAINTAIN DO not ue Or disable gale death or with boom boom unless ed E Failure to follow these instructions 1706306A 1706385C serious injury raised frame is level could result in death or serious injury 1706768 1706386 1706387 1706765 Vehicle Roll Away Fall Hazard Crushing Platform Voltage Warning 7 5 FALLING HAZARD Check the condition of th d fall protection device CRUSHING HAZARD i lanyerd and the designated sitadhment point foe latiori HAZARDOUS VOLTAGE INSIDE Riders could fall Wear approved fall protection items and attach to marked locations Always look in the direction of movement 1 off machine Keep both feet on platform floor Keep clear of obstructions e Refer to the Service and Maintenance Ensure entrance area is properly closed Keep all body parts inside of platform during operation Manual for servicing instructions causing DO NOT use planks ladders or similar items in platform to ye get added reach Failure to follow instructions could Death or serious injury could result from death or Falling from platform could cause death or result in death or serious injury contact with energized conductors
102. facturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CONTROL PANEL DECALS 1705745 Function Speed 1705744 Horn 1705745 C bes 1705744 A 1705753 MTB CE 800A 1705911 Nameplate
103. fication purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1001107851 1001107853 Platform Display Platform Display 1001107851 D 1001107853 D 1001107926 1001107927 Platform Display Platform Display gJ 1000 LB MAX 450 KG MAX 1001107926 C 1001107927 D 1001107952 1001107953 Platfor
104. g includes complete knowledge of the safety and operating instructions contained in the manufacturer s manuals your employer s work rules and applicable governmental regulations Untrained operators could cause SERIOUS INJURY OR DEATH to themselves or others TIP OVER HAZARD Chassis out of level When CHASSIS OUT OF LEVEL indicator light is on retract and lower boom and move machine to a level surface Failure to follow instructions could cause SERIOUS INJURY OR DEATH FALLING HAZARD Keep both feet on platform floor Do not climb sit or stand on platform guard rails Do not use planks ladders or similar items in platform to get added reach All guard rails must be properly installed during operation Falling from platform could cause death or serious injury TIP OVER HAZARD Do not exceed platform rated capacity or rated number of people Do not expose platform to high winds or horizontal forces Machine must be on smooth firm and level surface before elevating platform Do not drive near drop offs holes or other hazards Make sure operating surface will support the machine Death or serious injury could occur from a tip over CRUSHING HAZARD Always look in the direction of movement Keep clear of obstructions Keep all body parts inside the platform during operation Failure to follow instructions could result in death or serious injury THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATIN
105. g machine capability Drive with boom above horizontal or extended is restricted to SMOOTH FIRM and LEVEL surfaces free of obstructions Exercise extreme caution if driving within 6 feet of any obstruction 3252369 Warning Danger J Inspect the machine to be sure it is operating properly and perform the daily maintenance and safety checks listed on the check list at the ground control station All persons in the platform shall wear the approved fall protection equipment with a lanyard attached to the designated anchorage point Machine must be on a SMOOTH FIRM AND LEVEL surface before elevating and or extending boom Operate machine with extreme caution STOP all operation if malfunction occurs Operate controls slowly for smooth functions Watch for obstructions which may strike persons or machine A Do not exceed rated platform capacity IMPROPER OPERATION OF THIS MACHINE COULD CAUSE SERIOUS INJURY OR DEATH 1001117185 Warning Instruction DOM DANGER ELECTROCUTION HAZARD This machine is not insulated e Maintain a clearance of at least 10ft 3m between any part of machine or load and any electrical line or apparatus IMPORTANT Failure to follow instructions will result in death or serious injury FREE WHEELING INSTRUCTIONS Brake release button is located on the ground control station Manufactured by JLG Industries Inc WWW JLG COM 300 LBS 150 LBS 136 kg
106. g the platform or driving the machine with chassis trays open will result in death or serious injury container located on the platform E Close chassis trays before raising the platform or driving the machine moving parts will result in death or serious injury Keep away from moving 44255 C parts 44737 B GN46262 Battery Safety DANGER GN72853 Improper Use Hazard Electrocution Hazards Connect charger to a grounded AC 3 wire electrical outlet only Failure to read understand and obey the safety rules will result in death or serious injury The operator is responsible for safe machine operation Do not operate unless This Includes 1 Avoid hasardous situations 2 Always perform a pre operation inspection 3 Always perform function tests prior to use 4 Inspect the work place 5 Only use the machine as it was intended You read understand and obey manufacturer s instructions and safety rules safety and operator s manuals and decals employer s safety rules applicable governmental gegulations Before each use inspect for damaged cord cables and wires Replace damaged items before operating Component Damage Hazard Do not use any charger greater than 24V to charge batteries Always wear protective lighted tobacco away from k Do not contact battery acid Neutralize battery Failure to obey the following battery and charger safety rules will cause death or se
107. harged avoid overflow Do Not fill the fluid level until 4 Depleted batteries will take approx 17 hours to after charging charge 4 Replace if defaced 10 years 1702153 D 1704248 B 1705365 Load Management BCS IMPORTANT PROCEDURE FOR DAILY CHECK OF BOOM CONTROL SYSTEM AT THE BEGINNING OF EACH DAY S USE PERFORM CHECK WITH NO LOAD PERSONS OR MATERIAL IN PLATFORM FROM GROUND CONTROL STATION 1 Extend all axles fully 2 With the boom fully retracted raise boom off the boom rest to horizontal 3 Position jib horizontal jib straight and platform level 4 Extend boom until it stops 5 Boom must stop on colored stripe matching the capacity indicator If the boom does not stop on the correct stripe system must be repaired by JLG authorized service personnel before machine can be used 6 Push and hold the gray test switch on the ground control panel The lighting of a green boom control system light indicates the system is functioning properly No indicator light or the lighting of a 1 control system light indicates the system must be repaired by JLG authorized service personnel before macie can be used 1705365 B 1001092071 No Pipe Racks Allowed IMPORTANT No pipe racks panel carriers allowed on this machine 1001092071 B 1704521 Gradeability IMPORTANT FOR DRIVING WITH THE PLATFORM COMPLETELY LOWERED DO NOT EXCEED e MAX 2WD GRADEABILITY 25
108. hat may d from th t A Wheel lug nuts for tightness PN Outriggers are in fully stowed position A Hitch and ball load rating are adequate be necessary approval trom the manufacturer 5 1 imi i i Make sure that all the inspections listed in the JLG Operations Coupler hitch and trailer ball are same size Safety chains properly attached to A All trailer lights work properly or the legal speed limit whichever is lower And Safety Manual are done Trailer brakes adlusted and break 7 Contact your Motor Vehicle i i AA Coupler is properly seated and latched AA dacs te attacneh lo ton vehide o AA HR pin or Baden Authority for more information Excessive speed could result in loss of control Failure to follow these instructions could result in and serious injury or death y 5 5 8 nl 1706112B i ini Failure to follow these instructions could result in death or serious injury dE LE 1 death or serious injury 1706135B 1706298 Carry Personnel 1706300 Ether Warning 1706302 Pinch Point Boom Holes 1706296 Battery Warning Lull FALLING OFF ATTACHMENT could result in death or serious injury Keep sparks flames and lighted materials away from batteries DO NOT use Ether or ENGINE EXPLOSION ne could result A death me PINCH POINTS could crush or cut or serious Injury Engine equipped with causing death or serious injury 1706302B Pre heating system n 1 e Keep clear o
109. her names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1877716117 wwwilgcom JLG WARNING DANGER DECALS ADANGER ELECTROCUTION HAZARD THIS MACHINE IS NOT INSULATED You must maintain a clearance of at least 10 feet between any part of the machine or load and any electrical line or apparatus charged up to 50 000 volts one foot additional clearance is required for each additional 30 000 volts or less Allowances must be made for operator error boom deflection and electrical line swaying SERIOUS INJURY OR DEATH will result from contact or inadequate clearance 3252369 B DO NOT OPERATE THIS MACHINE UNLESS you have been trained in the safe operation of this machine Trainin
110. hine unless you have been properly trained as described in the JLG Operation and Safety Manual Failure to follow instructions could result in serious injury or death 1705680 A Do not drive near drop offs holes or other hazards Make sure operating surface will support the machine Make sure all tires are in good condition and air filled tires are properly inflated If required outriggers or stabilizers shall be extended and properly set Do not carry sheet type materials i e drywall plywood roof panels outdoors or in any windy conditions as they may act as a wind sail Death or serious injury could occur from a tip over CRUSHING HAZARD Always look in the direction of movement Keep clear of obstructions Keep all body parts inside platform during operation Failure to follow instructions could result in death or serious injury FALLING HAZARD Keep both feet on platform floor Do not climb sit or stand on platform guard rails Ensure entrance area is properly closed Do not use planks ladders or similar items in platform to get added reach All guard rails must be properly installed during Falling from platform could cause death or serious injury operation by a qualified person and authorized to operate this machine Your training includes reading and understanding the safety operating and maintenance instructions in manufacturer s manuals knowing
111. i Operate this machine with extreme 011011111 Sior stand ON PIANO guard rans caution STOP all operation if malfunction DO NOT modify or change this machine without written approval from the manufacturer Ensure entrance area is properly closed Make sure all tires are in good condition and air filled tires are properly inflated Do not use planks ladders or similar items in platform ESE Operate this machine with extreme caution STOP all operation if a malfunction occurs to get added reach 1 Check all functions at ground control and platform control stations Select an area free of obstructions All guard rails must be properly installed during Improper use of this machine could operation cause death or serious injury e E Mn Manual the Manual of Responsibilities and applicable Falling from platform could cause death or serious injury Read and understand decals and placards nid 1703816 E If this machine is not properly maintained death or serious injury could occur 1703798 D h or seri injury death or serious Injury Do not modify or change machine without written approval from manufacturer All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPP
112. icator Distress Level ON Indicator Indicator Stop Auxiliary 4 ET Power P b Control a Function 5 Speed Platform Articulating Main Soft EE I Rotate 8 Telescope Fly Boom Telescope Touch LUNA NA Override Indicator 1702784 F All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE P
113. igh winds DO NOT drive near drop offs holes or other hazards Make sure all tires are in good condition and air filled tires are properly inflated To drive on a slope boom must be retracted lowered below horizontal and centered between the rear wheels When Chassis out of level indicator light is on retract and lower boom and move machine to a level surface Driving with boom above horizontal or extended is restricted to smooth firm and level surfaces free of obstructions out of level Chassis hors niveau s allume replier et rabaisser la fl che et d placer la machine issus de la ligne horizontale ou d ploy e ne conduire que sur des surfaces lisses dures et ne Un renversement peut entrainer la mort ou causer des blessures graves RISQUE DE CHUTE V rifier l tat de l amortisseur de chute approuv de la longe et du point d attache d sign Death or serious injury could result from a tip over FALLING HAZARD Check the condition of the approved fall protection device lanyard and the designated attachment sur la plate forme Porter l quipement d amortissement de chute et le fixer aux endroits marqu s e Garder les deux pieds sur le sol de la plate form S assurer que la zone d entr e est correctement ferm e NE PAS utiliser de madriers d chelles ou tout autre objet semblable pour obtenir une port e suppl mentaire point to
114. imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CONTROL PANEL DECALS 1706946 1706950 MTB Legend MTB Power Emergency Stop Platform Control Off Ground Articulating Fly Boom 1706946 A Engine Distress Generator Start Function Enable 1706950 A 1707110 Legend Platform Plat Chassis P
115. in parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG WARNING DECALS 1701214 Outrigger DOM CSA 1702249 CRUSHING HAZARD Gate WARNING ert 5 CLOSE AND LOCK GATE BEFORE OPERATING FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY e Keep away from outriggers stabilizers Failure to follow these instructions could result in death or serious injury 1701214B 1702961 1702962 Prop 65 Gas Prop 65 DSL 1703181 50015 Capacity N CALIFORNIA Proposition 65 Warning The engine exhaust from this product Diesel engine exhaust and some of it
116. intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE DECALS ems mmm ee 0 ame emer ame GN82239 GN82366 GN82447 GN82657 GN97547 GN97887 GN97890 GENIE INDEX e NEC KNEE me amin ame TS mmo wm
117. ks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SKYJACK CAUTION DECALS BEFORE TOWING PUSHING OR WINCHING VEHICLE MUST BE ON LEVEL GROUND READ AND UNDERSTAND ALL INSTRUCTIONS REFER TO OWNERS MANUAL BLOCK OR CHOCK WHEELS TO PREVENT MACHINE ROLLING TURN MAIN DISCONNECT TO OFF POSITION CAUTION DO NOT USE HYDRAULIC POWER WITH BRAKE DISENGAGED BRAKE IS SPRING LOADED ALWAYS USE CAUTION KEEP HANDS CLEAR OF MECHANISM ROTATE LOCK OUT BLOCK WITH 3 4 INCH WRENCH AS SHOWN TO DISENGAGE BRAKE REMOVE WRENCH IMMEDIATELY BRAKE WILL RESET AUTOMATICALLY WHEN VEHICLE IS PUT BACK IN SERVICE OPEN FREE WHEELING VALVE
118. l original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1706914 ME 1706926 User Flash Codes FLASH CODES Sequence error release all switches Wait 5 seconds activate enable switch then
119. latform Engine Low Fuel Glow Plug me atform A i i nable Capacit Distress Level Generator Indicator 1 7 Level rose ped ON Q d oed E ONG Power MALFUNCTION a Function 4 Speed POEM ae Fuel Select s M Contre b Rotate z Telescope Articulating 1 Telescope m uel Selec PERS ndicator Fly Boom Override 1707110 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HERE
120. m Display CE Platform Display 8605 1001107952 C 1001107953 C 1001107954 Platform Display 800S 1001107954 C All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE
121. marks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG IMPORTANT DECALS 1702265 1702153 Manual Descent Inspection DOM 1703696 IMPORTANT ons IF THE LOWER BOOM ASSEMBLY DOES NOT FULLY LOWER Pull out red EMS knob located on ground control Turn key switch to ground control position Start the engine if applicable Pull and hold out the red re level knob located next to the main control valve Raise the lower boom 6 feet Release the red re level knob Lower the boom fully and conti
122. mem oem GN27205 GN27206 GN27207 Warning Crush Hazard GN28165 GN28171 GN28174 GN28175 GN28176 GN28177 GN28236 Warning Improper Operation GN30080 GN31060 GN31508 GN32932 GN40434 GN43696 Danger Electric Hazard GS GN43089 GN43091 GN33952 Danger Tilt Alarm 4 GN43093 GN44255 Crushing Hazard GN52865 Annual Inspection GN65052 Fault Codes GN72853 Danger Improper Use Hazard 4 JLG INDEX Part Number Description Page Number No Forklift Qo ON 1703072 oo 1703078 Legend m oo 1703084 Platform Display CE 1703162 Fan Blade 1703175 Lanyard GM D Rings or 1703181 Warning 50016 Capacity ER 1703398 Towing Winch 1703464 AC Power ON 1703465 MTB oo Max Tire Load 1703469 1703470 Max Tire Load Max Tire Load 1703472 1703475 Max Tire Load 1703482 Max Tire Load 1703486 Max Tire Load 1703488 Max Tire Load Max Wheel Load 1703493 m oo 1703678 Horn Drive Speed Level Q2 Go 1703681 JLG Qo ON 1703687 Direction Arrow Oo 1703689 Horn Drive Speed Level 1703694 Capacity 1703695 Legend 1703696 Gradeability QJ ON 1703697 Safety Prop E 1703698 Towing 1703706 Ground Control oo 10 10 oo gi 1703797 Warning Danger Platform UT 170
123. n stowed position across uneven terrain manuals debris unstable or slippery surfaces or near holes Be sure all decals are in place and legible and drop of s Be sire safety operator s and responsibilities manuals Do not attempt to free a caught or snagged platform are completed legible and in the storage container using platform controls All personnel must be removed located on the platform from platform before attempting to free platform using ground controls 97890 A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIE
124. nal equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE SNORKEL CAPACITY DECALS SN0073085 SN0090589 Platform Capacity 650 Platform Capacity 500 UNRESTRICTED UNRESTRICTED PLATFORM CAPACITY P
125. nd on platform guard rails Ensure entrance area is properly closed Do not use planks ladders or similar items in platform to get THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY Do not operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to 1703818 B Do not stand under or around platform Failure to follow these instructions could result in death or serious JLG WARNING DANGER DECALS 1703818 Crush Hazard DANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury CRUSHING HAZARD during operation Use safety props for maintenance injury O a e Gm 1704575 Warning Danger MTB 4 DANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury added reach All guard rails must be properly installed during operation Falling from platform could cause death or serious injury TIP OVER HAZARD
126. ne operations begin Connect charger to a grounded AC 3 wire electrical outlet only Before each use inspect for damaged cord cables and wires Replace damaged items before operating 31508 D GN43617 Tip Over Battery 4 DANGER Tip over hazard Failure to replace batteries with proper weight batteries will cause death or serious injury Batteries are used as counterweight and are critical to machine stability Each battery must weigh 65 pounds 29 5 kg 43617 017A GN44255 Crushing Hazard DANGER Crushing Hazard Contact with result in death or serious injury Do not alter or disable limit switch s 31060 C Do not push off or pull toward any object outside of the platform Use extreme care and slow speeds while driving the machine in stowed position across uneven terrain debris unstable or slippery surfaces and near holes and drop offs Do not alter or disable machine components that in any way affect safety and stability Do not place ladders or scaffolds in platform or against any part of this machine Do not use machine on a moving or mobile surface or vehicle Be sure all tire are in good condition castle nuts are properly tightened and cotter pins are properly installed Fall Hazards Do not sit stand or climb on the platform guard rails Maintain a firm footing on the platform at all times Do not climb down from the platform when raised Attach platform entry chain an
127. ng work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1703681 JEG 1702861 JLG Lift 8 1704789 E450AJ 1705460 Sky Power 1705754 1705781 JLG 3 5 116 275 LG 1230 WWW 1706667 1705864 1230ES JLG 12 TA All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks
128. nue to hold down switch for an additional 5 seconds Repeat steps 4 through 7 if necessary 1702265 C IMPORTANT WHEN DRIVING WITH THE PLATFORM COMPLETELY LOWERED DO NOT EXCEED e MAX 4WD GRADEABILITY 35 e MAX SIDE SLOPE 5 IMPORTANT delivery ANSI requires an annual inspection be 5 years performed by qualified personnel in accordance with manufacturer s specifications 1703696A 4 6 years Use JLG approved manuals parts and procedures Contact JLG regarding structural repairs Stamp frame with MONTH DAY YEAR next to arrow after each inspection Retain records in accordance with ANSI 8 year 7 year E 1704248 Battery Charger Instructions IMPORTANT Battery charging instructions For maximum battery life Avoid completely discharging the batteries Fully charge the batteries each day the machine is used E Notify JLG immediately of any changes of ownership 9 years 1 To charge batteries connect charger to proper voltage source with 15 AMP minimum capacity 2 The charge cycle is complete when the 10096 LED is lit Any other reading indicates that the Charge the batteries at available times charge cycle is not complete If the abnormal between full charges LED is lit consult the Operators Manual Ensure that the battery plates are immersed 3 The charger will shut off automatically when in battery fluid before charging However to the batteries are fully c
129. of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG COSMETIC DECALS 3252598 Model Tag 1932E2 1932E2 252598B 3 All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of J
130. of drive and steer functions are opposite to i i i itrols motion when boom is positioned over front axle 5 int All persons in the platform shall wear an approved fall protection device ron 1 3 Death or serious injury could result from a tip over with lanyard attached to the designated attach point Always look at the decals on the chassis and drive steer jury DO NOT replace items i e batteries tires counterweight etc with control for proper direction items of different weight or specification because this will affect the R stability of the machine Machine must be on a SMOOTH FIRM and LEVEL surface before To drive on any slope boom must be retracted lowered FALLING HAZARD elevating and or extending boom below horizontal and centered between rear wheels Check the condition of the approved fall protection device lanyard and the DO NOT modify or change this machine without written approval from designated attachment point to the platform the manufacturer Wear approved fall protection items and attach to marked locations Keep both feet on platform floor Ensure entrance area is properly closed DO NOT use planks ladders or similar items in platform to get added reach 5 8 5 7 7 Operate this machine with extreme caution STOP all operation if a malfunction occurs Do not drive up or down grades exceeding machine gradeability or side slopes exceeding 5 degrees Machine must be assisted towed up or d
131. of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury 1705681 C 1703823 Electrocution Hazard ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury 1703805 D M 1705681 Electrocution 7 A DANGER RISQUE D ELECTROCUTION Cette machine n est pas isol e e Maintenir une distance d au moins 3 m 10 ft entre la machine ou sa charge et tout appareil ou ligne lectrique Le non respect de ces instructions provoquera des blessures graves voire mortelles 1703936 C 1706128 Electrocution DANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10 ft between any part of machine or load and any electrical line or apparatus Failure to follow instructions will result in death or serious injury Maintain a clearance of at least 10FT 3M Failure to follow instructions will result 1706832 B DANGER 1705695 B 1706128E 1706832 1230ES Electrocution DANGER ELECTROCUTION HAZARD This machine is not insulated between any part of machine or load and any electrical lines or apparatus in death or serious injury ELECTROCUTION HAZ
132. ons Do not replace items i e Batteries wheels counterweight etc with items of different weight or specification because this will affect stability of machine Do not modify or change machine without written approval from manufacturer Operate this machine with extreme caution STOP all operation if malfunction occurs Improper use of this machine could cause death or serious injury DANGER ELECTROCUTION HAZARD This machine is not insulated Maintain a clearance of at least 10 ft 3m between any part of machine or load and any electrical line or apparatus Failure to follow instructions will result in death or serious injury CRUSHING HAZARD Personnel shall not position themselves or other objects UNDER boom and platform or BETWEEN boom and turntable or chassis e When operating from ground control station avoid being BETWEEN rotating superstructure and chassis or other immovable objects Failure to follow these instructions could result in death or serious injury THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine Your training includes reading and understanding the safety operating and maintenance instructions in man
133. original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG CAPACITY DECALS 3252689 3252694 Capacity 8001b 365kg p MAX MAX 1250 LB 550 LB
134. ou de blessure grave CAN 1703984 B 1704104 Dual Capacity DOM TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 500 Ibs UNRESTRICTED CAPACITY 1704432 Crushing 4 CRUSHING HAZARD Keep all body parts away from any moving components Failure to follow these instructions could result in death or serious injury 1704432 A 1704996 7501b 5001b Capacity DOM TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER 500 155 230 kg 750 1 5 340 kg All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED
135. own grades exceeding machine gradeability Move controls slowly for smooth operation Stop all operation if malfunction occurs Watch for obstructions which may strike persons or machines Driving with boom above horizontal or extended is restricted to SMOOTH FIRM and LEVEL surfaces free of obstructions FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH 17027855 Falling from platform could cause death or serious injury gt lt Test foot switch for proper operation CRUSHING HAZARD Always look in the direction of movement Keep clear of obstructions Test high engine and high drive cut out switches for proper operation Direction of drive and steer functions are opposite to the motion of the controls when the platform is positioned over the front axle end Always look at the decals on the chassis and drive steer control for proper direction 1 Keep all body parts inside of platform during operation Improper use of this machine could cause death or serious Injury Failure to follow instructions could result in death or serious injury 1703797 D 1703798 Warning Danger MTB he M 4 DANGER f ELECTROCUTION HAZARD ELECTROCUTION HAZARD This machine is not insulated This machine is not insulated Maintain a clearance of at least 10FT 3M between any part of machine or load and any electrical lines or apparatus Maintain a clearance of at least 10FT 3M be
136. re Load Max Tire Load Max Wheel Load MAX MAX MAX MAX 9103 kg 3583 kg 2767 kg 1996 kg 20200 Ibs 7900 Ibs 6100 Ibs 4400 5 0 1703482 C 1703488 1703694 1703868 Capacity Capacity 1932E2 7 Rus EL All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured b those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES ORIMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS W
137. rious injury Burn Hazards Explosion Hazards CE clothing and eyewear batteries Batteries emit when working with explosive gas batteries Battery tray should be open acid spills with baking soda and water Avoid contact with hot AS s or live electric circuits f j 9 Do not expose 27 batteries or charger to Batteries contain acid Keep sparks flames and Avoid spilling or during entire charging cycle contact with battery water and or rain 46262 C 7 586 terminals or cable clamps with tools that may cause sparks Lifting Hazard Use proper lifting techniques and appropriate number of people when lifting batteries You are properly trained to safely operate this machine All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXP
138. rly extended before lifting boom above horizontal or n MAX mm T la extending boom beyond 2ft 0 61m e e ba 4 54 0 DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER S N ANSI 1001122369 A 1 1 A 500 Ibs 0 227kg N MAX 100 6 445 N UNRESTRICTED CAPACITY MAX 1001121814 A 1001122507 1001122508 Dual Capacity ANSI Dual Capacity ANSI E Hia 327 kg p Pa UNRESTRICTED CAPACITY TIP OVER HAZARD UNRESTRICTED CAPACITY TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator bs located on the platform control console On units with inoperative or defaced e 0 0 0 1 Ib 445 N capacity indicators do not exceed 500 pounds maximum platform capacity 100 Ib 445 N 100 MAX T 1 TT 454 kg DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER MAX Do not exceed the platform capacity indicated on the capacity indicator e 715 0 bs located on the platform control console On units with inoperative or defaced capacity indicators do not exceed 500 pounds maximum platform capacity 1 T 34 0 kg DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER RESTRICTED CAPACITY 1001122507 A ANSI RESTRICTED CAPACITY 1001122508 A 1001122516 Dual Capacity ANSI TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER A 500 Ibs e gt 227 kg UNRESTRICTED CAP
139. s ECTS contains chemicals known to the State constituents are known to the State Nu one Le Platform capacity e onte eee indicator of California to cause cancer birth of California to cause cancer birth U N RESTRI CTED CAPAC ITY capacity indicators do not eed 00 Pound maaimum platform capacity defects or other reproductive harm defects or other reproductive harm 17018 V 1702961 j 1702962 1703942 Crushing CAN 1703804 1703813 Battery Ventilation CRUSHING HAZARD RISQUE D ECRASEMENT Do not stand under a raised platform or boom Ne pas se poster sous la plate forme or between a rotating platform and the boom ou la fl che sur lev e ni entre la plate forme pivotante et la fl che CRUSHING HAZARD EXPLOSION FIRE HAZARD Charge batteries in well ventilated area free of flames smoking or sparks Do not stand under a raised platform or boom or between a rotating platform and the boom Keep all body parts away from any moving components 1e A MA 5 Keep all body parts away from any Se tenir l cart des pi ces en mouvement moving components Failure to follow warning could cause death or serious injury Failure to follow these instructions could result in death or serious injury 1703813A 1703804 B Le non respect de ces consignes peut Failure to follow these instructions entra ner la mort ou causer des could result in death or serious injury blessuresgraves CAN 170
140. s are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1704239 1704252 Platform Display Legend MTB Power 1704240 Emergency Stop Horn and Positrack 7 Platform I A Control Off Ground 1704239 H 1704253 Legend Platform bi 8 T Chassis Platform s AC var CURE DU 2 e ce f e Seats E te SESS poen 3 x Hie cab eya E Level Indicator Distress ON noicator FA Can 5 Jib Main 0 LOIR Funcuon Swi niu Swing Speed wing zi Lu 3 2 Control 1 Ya 1 8 Enable 3 Generator Indicator Stop Q Enable wv x bel Platform Tower
141. s of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE JLG WARNING DECALS 1001121814 Maximum Capacity DOM 1001122369 Dual Capacity M 500 Ibs ir al T 227 kg UNRESTRICTED CAPACITY TIP OVER HAZARD TIP OVER HAZARD Ground control operation If any load is in the platform fully retract the boom before lowering DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP OVER On units with inoperative or defaced capacity indicators do not exceed 500 pounds maximum platform capacity 100 Ib 445 N Up 1 000 los Axles must be prope
142. s2 jlg com Phone 877 JLG LIFT Fax 800 733 8939 GENIE DANGER DECALS GN31508 Electric Hazard Plug DANGER Electrocution Fire Hazard Death or serious injury will result from use of improper or damaged cord and outlet GN33952 Tilt Alarm ADANGER GN32932 Tip Over Axles 4 DANGER Tip over hazard GN31060 Do Not Alter Switch DANGER Tip over Hazard Altering or disabling limit Switches can result in machine tip over Machine tip over will q 2 Counterweight downhill 1 Lower boom 2 Retract boom Q Y 1 4 Counterweight uphill 1 Retract boom 2 Lower boom Lu 43696 B Required Clearance Avoid Contact 10 ft 3 05 m 15 ft 4 60 m 20 ft 6 10 m 25 ft 7 62 m 35 ft 10 67 m 45 ft 13 72m Tip over Hazard if tilt alarm sounds unit is on a severe slope Death or serious injury could occur 33952 B Maintain required clearance Line Voltage 0 to 300V 300V to 50KV 50KV to 200KV 200KV to 350KV 350KV to 500KV 500KV to 750KV 750KV to 1000KV GN44737 Tip Over Trays DANGER Tip over hazard Do not raise boom past horizontal unless both axles are extended 32932 084A GN43696 Electric Hazard GS Electrocution Hazard Death or injury can result from contacting electric power lines Always contact the electric power line owner The electric power shall be disconnected or the power lines moved or insulated before machi
143. splay DOM T 2 1704707 D 1704993 Light Panel 7501b DOM 500 LB MAX 230 KG 750 LB MAX 340 KG MAX a Lo 1704993 D 1705015 Legend 1 Platform M O Drive 0 Steer Platform Capacity Select Select Level Indicator 1 4 a Function Platform Platform Speed Out of 4 Control Level 1705170 1705171 Headlight Jib Stow 1705170A 1705171A All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY O
144. structions provoquera des blessures graves voire mortelles any electrical lines or apparatus Failure to follow instructions will result in death or serious injury CETTE MACHINE NE PEUT TRE UTILIS E QUE SI ELLE A T INSPECT E ET JUG E THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY EN BON ETAT DE FONCTIONNEMENT NE PAS utiliser cette machine moins d avoir t form ad quatement par une personne comp tente conform ment aux instructions du manuel 1 s la faire fonctionner La formation dispens e vous permettra le s curit JLG JLG Operation and Safety Manual et d tre autoris s tion ince figurant dans les manuels du DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine Your training includes reading and understanding the safety operatin and maintenance instructions in manufacturer s manuals knowing your employers work rules and applicable governmental regulations d exploi Follow the Instructions in the Operating Manual the Manual of Responsibilities and applicable standards for required inspections fabricant applicable Suivre les tions batteries pneus contrepoids etc par d autres pi ces dont le poids ou les sp cifications DO NOT replace items i e Batteries tires counterweight etc with items of different weight
145. te Chassis Out of Level Platform Rotate Chassis Out of Level Platform Rotate Chassis Out of Level Platform Rotate 1001108492 Legend Platform 400 Platform Function Speed Control 1001108493 Legend Platform 450A 450AJ 510AJ 600A 600S Platform Function Speed Control 1001108494 Legend Platform 600SC Platform Function Speed Control 1001108495 Legend Platform 740AJ 800A 800AJ Platform Level Function Speed Control All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE
146. the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THEMANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT IN TORT INCLUDING NEGLIGENCE OR OTHERWISE 1704952 Platform Display E GAB 1704952 E 1704997 Stop 1704997 B Power Start Engine Glow Plug Enable Emergency a Distress ON 56 Indicator 0 5 Indicator Stop Auxiliary Power Soft uv 5 y Steer Override Indicator Exceeding Operating Radius Main Telescope 1705015 B 1705173 Platform Display DOM GAB 1705173 C 1704707 Platform Di
147. tween any part of machine or load and any electrical lines or apparatus Failure to follow instructions will result in death or serious injury Failure to follow instructions will result in death or serious injury TIP OVER HAZARD THIS MACHINE MUST NOT BE Do not exceed platform rated capacity or rated number USED UNTIL IT IS INSPECTED of people Evenly distribute load AND OPERATING PROPERLY Do not expose platform to high winds or horizontal forces Machine must be on smooth firm and level surface 7 5 before elevating platform Do not operate this machine unless you CRUSHING HAZARD Do not drive with platform raised or raise platform E ee is ana when on uneven sloping or soft surfaces including bs e lifi dm ron ake 0 e B Lin trucks trailers railway cars floating vessels scaffolds y quai 1e person ancanu 9 9 ae orsimilar areas operate this machine Your training Do not drive near drop offs holes or other hazards includes reading and understanding the Make sure operating surface will support the machine safety operating and maintenance Make sure all tires are in good condition and air filled instructions in manufacturer s manuals knowing your employers work rules and tires are properly inflated 1 If required outriggers or stabilizers shall be extended applicable governmental regulations Failure to follow these instructions could x and properly set result in death or
148. ual LL 119674AD zz 124362AD 116577AC SJ125724 SJ126056 Railing Height Falling Hazard SJ124767 Lift Point Tie Down SJ129838 Keep SJ130018 SJ130634 Harness Anchor Lift Up Down Drive SJ129839 Clear 130018AA 1 0 4 c m f 0 o O All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All other names trademarks are the property of their respective owners and manufacturers THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY EXPRESSES OR IMPLIED AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED THE REMEDIES PROVIDED HERIN ARE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG S OBLIG
149. ufacturer s manuals knowing your employers work rules and applicable governmental regulations DO NOT replace items i e Batteries tires counterweight etc with items of different weight or specification because this will affect the stability of the machine DO NOT modify or change this machine without written approval from the manufacturer Make sure all tires are in good condition and air filled tires are properly inflated Operate this machine with extreme caution STOP all operation if a malfunction occurs Check all functions at ground control and platform control stations Select an area free of obstructions Follow the Instructions in the Operating Manual the Manual of Responsibilities and applicable standards for required inspections Read and understand decals and placards 1704575 C If this machine is not properly maintained death or serious injury could occur All original equipment manufacturer names part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies JLG JLG GROUND SUPPORT PARTSPLUS SKYTRAK and LULL are registered trademarks of JLG Industries Inc GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries Inc All ot

2013 Decal Catalog

Contents

Download Pdf Manuals

Related Search

Related Contents