35973 - Commercial Wheelchair Lifts
Contents
1. 160 7 cm 63 1 4 51 4 cm 20 1 4 A r 30 5 cm Y 12 A 72 2 cm 30 5 cm 28 7 16 yY az 5 75 6 TT 48 3 cm Max 29 3 4 19 Max Y 121 6 47 7 8 85 1 cm 33 1 2 v ni 9 79 4 31 1 4 60 6 cm 11 7 cm 23 7 8 4 5 8 109 9 cm Max E 43 1 4 Max f q m gt 108 9 77 8 30 5 8 149 9 cm 59 4 87 6 34 1 2 J 30 5 cm 12 38 4 cm 15 1 8 Operation Notes and Details When the bus door s open the SL600 Step Lift is positioned in the doorway such that the stowed platform serves as the bottom step en try The lift equipped step is horizontal serving as the second step Lift Power ON OFF Switch This pump module mounted switch must be in the ON position in order to activate the lift A green Power Indicator Light illuminates to signal power to the lift Hand held Pendant Control The hand held attendant s pendant control is equipped with a single UP DOWN rocker switch The momen tary switch activates the power UP and gravity DOWN functions The SL600 features a 2 stage platform The outer platform is manually deployed and stowed The lift equippe2. Page 28 Providing Access to the World Over 300 Braun Dealers Worldwide 7 THE BRAUN mm CORPORATION Providing Access to the W orld De ra Sa A AREE Hdqrs Box 310 Winamac IN 46996 USA THE 574 946 6153 FAX 574 946 4670 Service Manual for Series 01 51500 Lift Series MER THE BRAUN Daas CORPORATION Providing Access to the World International Corporate Hdgrs Box 310 Winamac IN 46996 USA 1 800 THE LIFT 574 946 6153 FAX 574 946 4670 35973 March 2010 500915 Solio descriptions 5 sie Sasad on ina dues Information avaiable publication Braun eorgorddonfi2e 23 12 ficri 9 illt ges at any time without noise OS Brin
3. listed in previous section also Inspect cotter cottered pins Slide tube chain cottered pins 4 Slide tube chain cotter pins 4 Inspect UHMW bearings buttons Slide tube carriers 16 Platform uprights 4 Hydraulic Fluid Pump Check level Note Fluid should be changed if there is visible contamination Inspect the hydraulic system cylinder hoses fittings seals etc for leaks if fluid level is low Inspect cylinders fittings and hydraulic connec tions for wear damage or leaks Inspect platform uprights slide tubes slide tube carriers and inboard and outboard platform Resecure or replace if needed Resecure or replace if needed Use Braun 32840 QT Exxon Univis HVI 26 Do not mix with Dextron IIl or other hydraulic fluids Check fluid level with platform lowered fully Fill to maximum fluid level indicated on reservoir speci fied on decal Do not overfill If fliud level decal is not present measure 3 4 from the fill port to locate fluid level Tighten repair or replace if needed Replace damaged parts and resecure as needed Maintenance and Lubrication Schedule continued Inspect slide tube chain main rollers 2 Apply light oil or replace as needed See Lubrica tion Diagram Inspect power cables Resecure repair or replace if needed Mounting Check to see that the lift is securely anchored to the vehicle and there are no loose bolts broken welds or
4. stress fractures Decals Replace decals if worn missing or illegible Inspect slide tube chains for stretch or damage Check chain tension at floor level Both sides must be equal Adjust using threaded chain bolt located inside slide tube Replace if needed Inspect chain bolt for proper securement chain Verify bolt is securely tightened and is aligned so attachment or damage that chain does not twist Replace if needed Consecutive Repeet all previously listed inspection lubrica 750 Cycle tion and maintenance procedures at 750 cycle Intervals intervals Page 13 POWER INTERLOCK Lift Electrical Schematic DESCRIPTION SYMBOL LED LIGHT BATTERY LL CHASSIS GROUND l CIRCUIT BREAKER FUSE JUNCTION MOTOR SOLENOID SWITCH es mp 1 CONNECTER 22 44 NOTES 1 JUNCTIONS ONLY OCCUR AT MARKED INTERSECTIONS SWITCH BOX 22 DOWN WH 22 TED OR 18 RD 18 RD 18 all gt WH 18 GN 18 PUMP DOWN s GROUND SOLENOID N C Valve RD 18 RD 18 UP FOLD E LIFT SOLENOID PUMP POWER GN 18 1e OR 18 GROUND SWITCH E PUMP RD 18 Rp g 5 BK 6 L RD 4 _ HYDRAULIC OFF 8 UP CIRCUIT SENTRY CHASSIS CIRCUIT BREAKER GROUND m mo mas CHASSIS GROUND WH 18 P
5. warranty registration is completed and received by Braun Failure to file this warranty registration with Braun will not affect your rights under this limited warranty as long as you can present proof of purchase but it can cause delays in obtaining the benefits of this limited warranty and it changes the start date of the warranty to the date of final assembly of the product by Braun Braun agrees to repair or replace any of its factory installed parts found to have substantial defects within the appropriate warranty period designated above provided that the repair is authorized by Braun and car ried out by an authorized service center a Braun labor schedule determines the cost allowance for repairs Braun will not honor any warranty claim for repairs or replacement of parts unless the claim is submitted with the appropriate paperwork and the work is completed by an independent factory authorized service center The appropriate paperwork can be obtained by written or phone contact with Braun at the contact information in this warranty Braun reserves the right to designate where any warranty work can be performed Braun also reserves the right to examine any defective workmanship or part prior to giving any authorization for warranty work Braun s return authorization procedure must be adhered to in order to process any warranty claims THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE
6. 4 011Y ROLLSTOP STEP LIFT 28 1 28132R ROD 5 32 TORSION SPRING BAR REAR 13 1 SL04 012R ROLL STOP REAR 27 1 28132F 5 32 TORSION SPRING BAR FRONT 12 1 SL04 012F ROLL STOP FRONT 26 4 14614 NUT 1 4 20 NYLOCK AUTO BK 11 2 28128 BEARING FLANGE 10MM X 12MM BB1012DU 25 2 945 0336N BEARING PLATFORM SLIDE 10 1 35766 HANDLE PLATFORM UNFOLD STEPLIFT 24 2 13889 RING 1 2 EXT SELF LOCK SNAP AUTO BK 9 8 14549 SCREW 8 18 X 1 WH SELF TAP AUTO BK 3 4 29371 WASHER THRUST 875 OD 50 ID 0585T 8 1 SL04 009B OUTER PLATFORM SKIN BOTTOM 22 1 SL04 015 GROUND FOOT SAC PAD a 4 82033R023 5 TAPE 1 16 X 3 4 X 108 DBL FACE x 23 1 2 21 1 SL04 014FW WMT LATCH FOOT FRONT 6 1 SL04 010Y OUTER PLATFORM TRIM 20 1 SL04 014RW WMT LATCH FOOT REAR 5 2 24442 BEARING FLANGE 1 2 X 1 4 08FDUO4 19 2 10064 WASHER 3 8 FLAT AUTO BK 4 17 11513 RIV POP SD64BS 3 16 13 25 AUTO BK 18 2 11563 SCREW 1 4 20 X 1 4 SET CUP PT 3 1 SL04 009TDS OUTER PLATFORM SKIN TOP 17 4 18349 10 32 W LOCKWASHER AUTO BK 2 4 82033R025 5 TAPE 1 16 X 3 4 X 108 DBL FACE x 25 1 2 16 4 17192P SCREW 10 32X1 2 FHDHXS AUTO BLK W PATCH 1 1 SL04 005W WMT OUTER PLATFORM 15 2 28131 PIN CLEVIS 5 16 X 1 032 LEN AUTO BLACK ITEM QTY PART NUMBER DESCRIPTION ITEM QTY PART NUMBER DESCRIPTION Page 24 Exploded Views and Parts Lists Outer Platform Assembly See Parts List on Lower Left Page 25 Braun Limited Warranty WARRANTY COVERAGE AND
7. D IS LIM ITED IN SCOPE OF COVERAGE TO THE SCOPE OF COVERAGE OF THIS LIMITED WARRANTY Braun disclaims any express or implied warranty including any implied warranty of fitness or merchant ability on items excluded from coverage as set forth in this limited warranty Braun makes no warranty of any nature beyond that contained in this limited warranty No one has authority to enlarge amend or modify this limited warranty and Braun does not authorize anyone to create any other obligation for it regarding this product Braun is not responsible for any representation promise or warranty made by any independent dealer or other person beyond what is expressly stated in this limited warranty Any selling or servicing dealer is not Braun s agent but an independent entity BRAUN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT MAY RESULT FROM BREACH OF THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY THIS EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES SHALL BE INDEPENDENT OF ANY FAILURE OF THE ESSENTIAL PURPOSE OF ANY WARRANTY AND THIS EXCLUSION SHALL SURVIVE ANY DETERMINATION THAT THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY HAS FAILED OF ITS ESSENTIAL PURPOSE This warranty does not cover and in no event shall Braun be liable for towing charges travel lodging or any other expense incurred due to the loss of use of the product or other reason Page 26 Braun Limited Warranty Some states do not allow limitations on how long
8. L UN OWNER ADDRESS TELEPHONE STATE zip TO VALIDATE WARRANTY REGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION Sample Warranty Registration Card Contents Troubleshooting and Maintenance Lift Terminology 2 2 2 3 Lift Dimensions 4 Operation Notes and Details 5 Lift Operating 5 6 7 Manual Operating 5 8 Lubrication Diagram 10 Maintenance and Lubrication Schedule 11 13 Lift Electrical Schematic 14 Lift Wiring Diagram 15 Hydraulics Hydraulic Parts 17 Hydraulic Diagram 18 Hydraulic Schematic 19 Repair Parts Pump Module Pump Module Parts 16 20 Pump Module Diagram 21 Lift Exploded Views and Parts Lists Main Body 22 Up
9. STEP STOP 1 1 SLO1 001W WMT BACK PLATE ITEM QTY PARTNUMBER DESCRIPTION Page 22 Exploded Views and Parts Lists Upright Platform Assembly i ess 13 1 SLO3 003FWY WMT BKT STEP LOCK FRONT 12 1 SLO3 003RWY WMT BKT STEP LOCK REAR 11 3 11513 RIV POP SD64BS 3 16 13 25 AUTO BK 10 6 82033R001 TAPE 1 16 X 3 4 X 108 DBL FACE x 1 9 4 82033R023 5 TAPE 1 16 X 3 4 X 108 DBL FACE x 23 1 2 8 1 SL04 004DS PLATFORM SKIN INNER 7 6 35361 ROLLER UPRIGHT 6 12 84383 E CLIP 3 8 SHAFT 5 6 35570 PIN CARRIER ROLLER 4 4 205 1760 BEARING UHMW FLAT 1 226 THN BLK 3 12 25171 BOLT 5 16 18 X 2 FLBHSCS GD8 2 2 SLO6 001WY WMT HANDRAIL 1 1 SLO3 001W WMT PLATFORM ITEM QTY PARTNUMBER DESCRIPTION Page 23 Exploded Views and Parts Lists Step Assembly Assembled View 9 4 82033R011 5 TAPE 1 16 X 3 4 X 108 DBL FACE x 11 1 2 8 3 11513 RIV POP SD64BS 3 16 13 25 AUTO BK 7 2 35726 STEP HINGE PIN 6 4 35714A ASSY BLK HINGE 5 4 35777 SCREW 3 8 16 x 1 1 4 BHCS 4 3 14993 RIV POP SD66BS 3 16 25 38 AUTO BK 3 1 SLO1 021Y STEP COVER 2 1 5101 012 STEP SKIN 1 1 SL01 008W WMT STEP ITEM QTY PART NUMBER DESCRIPTION Outer Platform Assembly Parts List See Illustration at Right 14 1 SL0
10. Service Manual for SL600 Lift Series Series 07 6 Min Read manual v THE BRAUN before installing CORPORATION 2 or servicing lift Providing Access to the World Failure to do so 210 nr may result in serious bodily injury and or property damage 59195 00915 Congratulations We at The Braun Corporation wish to express our fullest appreciation on your new purchase With you in mind our skilled craftsmen have designed and assembled the finest lift available This manual provides maintenance and service related material Braun Vista Series lifts are built for dependability and will provide years of pleasure and indepen dence as long as the lift is properly maintained and operated by an instructed person Sincerely THE BRAUN CORPORATION or 7 Ralph W Braun Chief Executive Officer Warranty Consult your local Braun dealer regarding warranty policy www braunlift com international The Braun Corporation 1 800 THE LIFT BRAUNLIFT COM MODEL NUMBER E Model No SERIAL NUMBER Serial MFG DATE COX Date of Manufacture 43 Sample Serial No Series No Identification Tag Model No Serial No OWNER S WARRAIITY REGISTRATION 3000000009 XX000X C
11. WARRANTY COVERAGE TIME PERIODS The Braun Corporation Braun warranty covers certain parts of this wheelchair lift for three 3 years or 7500 cycles and the cost of labor to repair or replace those parts for one 1 year or 2500 cycles This limited warranty covers substantial defects in materials and workmanship of the lift provided that the lift is operated and maintained properly and in conformity with the owner s manual The warranty period begins on the date that the product is delivered to the first retail purchaser by an independent authorized dealer of Braun or if the dealer places the product into any type of service prior to retail sale on the date the dealer first places the product in such service This limited warranty applies only to the first purchaser It may not be transferred WHAT BRAUN WILL DO TO CORRECT PROBLEMS In the event that a substantial defect in material or workmanship attributable to Braun is found to exist during the first year of warranty coverage it will be repaired or replaced at Braun s option without charge for parts or labor to the owner in accordance with the terms conditions and limitations of this limited war ranty If the substantial defect in material or workmanship attributable to Braun is found to exist during the second or third year of warranty coverage it will be repaired or replaced at Braun s option without charge to the owner for parts only in accordance with the terms conditions a
12. age 14 Lift Wiring Diagram Hand Pendant As Viewed From Terminal Side of Switches Up Down Switch 7 COND WIRE CODE NO COLOR 1 NOT USED RANGE 22 UP NOT USED NOT USED BLACK 22 DOWN NOT USED WHITE 22 POSTIVE Lift Power Switch RD 18 35897A lt 5 8 e 3 8 7 COND WIRE CODE NO COLOR lt 5 9 e 3 8 OR 18 WH 18 Power Interlock LED outa 1 Hydraulic Pump RD 4 f RD 18 ub RD 18 GN 18 amp Ground Down al s TJ Solenoid His 2 T a Connects to 5 5 Circuit Sentry Vehicle Battery 5 2 Lead Wire 4 Positive Post iif 13362A Power Cable 19 33688A 2 Aux Page 15 NOTES This page intentionally left blank Page 16 Unfold Orifice OPPOSITE PUMP CYLINDER Description Hydraulic Schematic Description PUMP SIDE CYLINDER Fixed Displacement Pump Manual Shut Off Valve Vented Reservoir Lever Unfold Orifice Solenoid Actuated 2 Way Normally Closed Valve Single Acting Cylinder C
13. an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you HOW TO GET SERVICE To obtain warranty service the owner must do all of the following 1 Notify an authorized service center of the claimed defect attributable to Braun within the warranty cov erage period designated above 2 Provide the notification mentioned in 1 above within ten 10 days of when the owner discovered or should have discovered the claimed defect 3 Promptly schedule an appointment with and take the product to an authorized service center for service 4 Pay any transportation costs and all expenses associated with obtaining warranty service Since Braun does not control the scheduling of service work at the independent dealerships you may en counter some delay in scheduling or completion of work If you need assistance you may contact Braun at 631 West 11th Street Winamac Indiana 46996 1 800 THE LIFT 843 5438 If two 2 or more service attempts have been made to correct any covered defect that you believe impairs the value use or safety of the product or if it has taken longer than thirty 30 days for repairs to be com pleted you must to the extent permitted by law notify Braun directly in writing at the above address of the unsuccessful repair s of the alleged defect s so that Braun can become directly involved in providing service pursuant
14. andle To Lower Platform 4 Press DOWN switch until entire platform reaches ground level and outer barrier unfolds fully To Raise Platform Press UP switch until lift reaches floor level stops P Page 6 Lift Operating Instructions TO STOW LIFT 1 Align Red Arrows Lower lift press DOWN Switch or raise lift press 4 UP switch until lift reaches stow level two red Stow arrows align 2 Stow Platform Lift and rotate outer plat form in to stowed position gt 3 Stow Step Unlatch and lower step 4 step lock blocks align with step lock brackets 4 Stow Lift Press DOWN switch to p lower lift fully stops Page 7 Page 8 Manual Operating Instructions DOWN TO LOWER Using hand pump handle 4 1 Open hand pump valve turn counterclock wise Open 1 4 turn only Note Refer to Lift Operating Instructions for platform and step procedures UP TO RAISE Using hand pump handle 4 Close hand pump valve p gt wae turn clockwise Note Valve must be tight but do not over tighten Insert handle hand pump and stroke Note Close valve se curely before operating electric pump NOTES This page intentionally left blank Page 9 Slide Tube Chain LO Main Rollers 2 LO Slide Tubes Outside 2 DE Up
15. chips on any interior or exterior surface of the product including those caused by rocks or other road hazards damage caused by off road use overloading or alteration of the product or any of its components or parts Defects and or damage to interior and exterior surfaces and other appearance items may occur at the fac tory or when the product is in transit These items are usually detected and corrected at the factory or by a dealer prior to delivery to the purchaser You must inspect the product for this type of damage when you take delivery If you find any such defect or damage you must notify the selling dealer or Braun at the time of delivery to have these items covered by this limited warranty and to have work performed on the items at no cost to you as provided by this limited warranty Page 27 Braun Limited Warranty EVENTS DISCHARGING BRAUN FROM OBLIGATION UNDER WARRANTY The following shall completely discharge Braun from any express or implied warranty obligation to repair or replace anything and void this warranty misuse neglect collision accidents failure to provide routine maintenance See Owner s Manual unauthorized alteration off road use Acts of Nature damage from weather or the environment theft vandalism tampering fire explosions overloading the product and odometer tampering LEGAL REMEDIES Any action to enforce any portion of this limited warranty or any implied warranty must be commenced within s
16. d step raises automatically as the lift raises and stows locks as the lift low ers The step is manually positioned for the stow lock function Deploy lt gt The lift must be raised to the proper position height to allow manual deployment of the outer platform Two green Deploy arrows provided on the left slide tube must be aligned before deploy ing the outer platform As the lift raises from stow position the step rotates to vertical position and latches Once the step is latched in the vertical position and green Deploy arrows are aligned the outer platform can be manually deployed Lift and rotate platform 180 outward to horizontal position A recessed pivoting handle is provided in the out board platform for manual operation If the step is not latched in the vertical position and the lift is not properly positioned green arrows aligned hand injury could occur when manually rotating AWARNING the platform Manually rotating outer platform when Once the outer platform is fully deployed the lift can be lowered to the ground or raised to floor level as needed step is horizontal and or green arrows are not aligned could result in hand injury Stow gt Two red Stow arrows provided on the right slide tube must be aligned before manually stowing the lift platform and step Press UP or DOWN to po sition the lift at stow height align arrows Lift and rota
17. heck Valve Relief Valve Filter Hydraulic Port Page 17 Hydraulics Parts List Seal Kits If repairing a cylinder order Seal Kit 41500 0500P Page 18 Item Qty Description Part 1 1 Pump Assembly M3219 0115 12V w Reservoir and Backup Pump 35702 12V 2 1 Clamp Hose M268 29663 3 1 Solenoid 4 Post Trombetta Angle 35310 4 1 Motor Pump 12V Low RPM 29690 5 1 Valve Assembly Down complete Includes items 6 amp 7 35080 6 1 Coil only Valve shown below 35079 7 1 Cartridge only Down Valve shown below 31124 8 1 Clamp Reservoir H 48 M259 17069 9 1 Reservoir Hydraulic Fluid 30160 10 3 Screw 1 4 20 x 2 1 4 Allen Head 26080 11 1 Hand Pump Backup with O Rings Item 12 31125 12 2 O Ring only Hand Pump Mounting 17351 13 1 Cap Reservoir Filler Screw On 30167 14 1 Fitting Male 7 16 20 SAE O Ring to 7 16 20 JIC 37 Male 24504 15 1 Elbow Manifold 7 16 20 JIC 37 Female Swivel x 7 16 20 JIC 37 Male 2 26579 16 1 Hose Assembly 3 16 Pump Side 915 5603 63 5 17 1 Hose Assembly 3 16 Opposite Pump Side 915 5603 108 18 2 Cylinder includes item 19 C1522 24048LA 19 2 Elbow 90 3 8 24 SAE O Ring Male 7 16 20 JIC 37 Male Orifce 35834 20 1 Handle with Grip 17206A Down Valve complete Cartridge 31124 Hydraulics Diagram Hyd
18. ix 6 months after expiration of the warranty coverage period designated above or the action will be barred because of the passage of time Any performance of repairs shall not suspend this limitation period from expiring Any performance of repairs after the warranty coverage period has expired or performance of repairs regarding any thing excluded from coverage under this limited warranty shall be considered good will repairs and they will not alter the terms of this limited warranty or extend the warranty coverage period or the filing limitation period in this paragraph In addition since it is reasonable to expect that the product will need some service during the warranty period this warranty does not extend to future performance It only sets forth what Braun will do and does not guarantee anything about the product for any time period Nothing in this warranty or any action of Braun or any agent of Braun shall be interpreted as an extension of any warranty period or the filing limitation period in this paragraph Some states do not allow a reduction in the statute of limitations so this reduction may not apply to you WARRANTY REGISTRATION and MISCELLANEOUS Your warranty registration records should be completed and delivered to the appropriate companies includ ing the Braun Delivery Checklist amp Warranty form That form must be returned to Braun within twenty 20 days of purchase The Braun warranty will not be registered unless this
19. lable from The Braun Corporation under part number 11522 1 X Indicates items not included with replacement pump modules complete v Indicates items not shown Page 20 Pump Module Diagram Pump Mounting Bolts Apply red 271 Thread Locker Locktite to the two pump mounting bolts item 9 if a blue nylon patch is not present on the bolts when retrofitting an M259 pump assembly Loctite is available from The Braun Corporation under part number 11522 1 Page 21 Exploded Views and Parts Lists Main Body Assembly ITEMS NOT SHOWN 19 4 23173 PIN COTTER 1 32 X 1 2 4X4 18 2 21708R058 CHAIN LEAF 4X4 5 PITCH X 58 17 1 35380FA ASSEMBLY SLIDE TUBE CARRIER 16 1 35380RA ASSEMBLY SLIDE TUBE CARRIER 15 8 10084 SCREW 8 18 X 1 SELF TAP HEX 14 4 800 3003 CLAMP CYLINDER L800 amp L205 13 2 C1522 24048LA ASSY STEPLIFT 12 18 13583 SCREW 8 18 X 1 2 PH PN SD AUTO BK 11 2 SL01 016 COVER CHAIN CHANNEL 10 4 84189 RING RETAINING 5 8 9 4 21759 PIN COTTERED 466 CHAIN TSUBAKI 8 2 12895 NUT 7 16 14 HEX NYLOCK 7 2 14414 NUT 7 16 14 HEX JAM AUTO BK 6 2 21711 BOLT CHAIN 4X4 7 16 14 3 046 5 2 35362 ROLLER MAIN 4 2 35359 PIN MAIN ROLLER 3 6 11513 RIV POP SD64BS 3 16 13 25 AUTO BK 2 1 SLO1 020Y
20. nd limitations of this limited warranty The cost of labor for any repair or replacement in the second and third year of warranty cover age is the sole responsibility of the owner This warranty does not cover labor costs in the second or third year of coverage Braun s obligation to repair or replace defective materials or workmanship is the sole obligation of Braun under this limited warranty Braun reserves the right to use new or remanufactured parts of similar quality to complete any work and to make parts and design changes from time to time without notice to anyone Braun reserves the right to make changes in the design or material of its products without incurring any obligation to incorporate such changes in any previously manufactured product Braun makes no war ranty as to the future performance of this product and this limited warranty is not intended to extend to the future performance of the product In addition the owner s obligation to notify Braun or one of its authorized independent dealers of a claimed defect does not modify any obligation placed on the owner to contact Braun directly when attempting to pursue remedies under state or federal law LIMITATIONS EXCLUSIONS AND DISCLAIMER OF IMPLIED WARRANTIES ANY IMPLIED WARRANTY THAT IS FOUND TO ARISE BY WAY OF STATE OR FEDERAL LAW INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS IS LIMITED IN DURATION TO THE TERMS OF THIS LIMITED WARRANTY AN
21. raulic Pump Motor JapullA9 epis Jepurj 9 ausoddo Page 19 Pump Module Parts List Item Qty Description Pump Module Contains 1 14 amp 16 21 SL05 001A Weldment Pump Mount SL05 001W Pump M259 w Monarch Reservior 12V 35702 12V Cover Pump 51001 018 Screw T Head Thumb 10 32 x 3 8 33435 Pop Rivet 3 16 x 13 25 SD64BS Black 11513 Spring Clamp Pump Handle 12350 Pump Handle with Grip 17206A Washer 5 16 External Tooth 16368 NI a Bolt 5 16 18 x 3 4 w Nylock Patch 29608 o Diode Green LED Panel Mount 29545 Switch Toggle w Gold Contacts 31787 Fitting 7 16 20 Male SAE O Ring x 7 16 20 JIC 37 Male 24504 Elbow Manifold 7 16 20 JIC 37 Female Swivel x 7 16 20 JIC 37 Male 2 26579 Snap Rivet Nylon 124 Hole x 197 236 Thick 29874 Hand Pendant X 35895A Harness Battery 4 SGX 3 8 Eye 37 wlLoom v 33688A Harness Main SL600 v 35892A Harness Ground SL600 v 35896A Harness Power SL600 v 35897A Hose Assembly 3 16 Diameter x 108 915 5603 108 Hose Assembly 3 16 Diameter x 63 5 wv 915 5603 63 5 Apply red 271 Thread Locker Loctite to the two pump mounting bolts item 9 if a blue nylon patch is not present on the bolts when retrofitting an M259 pump assembly Loctite is avai
22. representative at the scheduled intervals according to the number of cycles All service procedures must be performed when the lift is fully on the ground SL600 Series lifts are equipped with hardened pins and self lubricating bushings to decrease wear provide smooth operation and extend the service life of the lift When servicing the lift at the recommended intervals inspection and lubrication procedures specified in the previous sections should be repeated Clean components and the surrounding area before apply ing lubricants LPS2 General Purpose Penetrating Oil is recommended where Light Oil is called out Use of improper lubricants can attract dirt or other contaminants which could result in wear or damage to the components Platform components exposed to contaminants when lowered to the ground may require extra attention Lift components requiring grease are lubricated during assembly procedures When replacing these components be sure to apply grease during instal lation procedures Specified lubricants are available from The Braun Corporation part numbers provided on previous page All listed inspection lubrication and maintenance procedures should be repeated at 750 cycle intervals Outer barrier pivots 2 Activation foot bearings 2 Outer barrier bracket slots 2 Outer platform fold bearings 2 Inspect outer barrier for proper operation positive securement and detached or missing springs Inspect lif
23. right Platform Assembly 23 Step Assembly 24 Outer Platform 25 Warranty Braun Limited Warranty 26 28 Page 1 Lift Terminology Hand Held Slide Tube 2 Control Pendant Ny Step d Hand Hold Mounting Base Step Lock Block 2 Raise Lower Hydraulic Cylinder 2 not visible Platform c Upright 2 Step Stowed Engagement Guide 2 Inner Platform gt lt Outer N 4 Platform 1 Deployed Platform Side Plate 4 Outer Barrier Outer Barrier Inboard Right Activation Foot Left Outboard 2 Lift Terminology Right Handrail Left Handrail LL VN NG Outer al Platform Stowed Outer Barrier Activation Foot Platform Side Plate 4 Inboard Right Left Outboard Hand Held Control Pendant Hanger Key Hole Slot Platform Handle Page 3 Lift Dimensions
24. right P di Rollers 10 LO Maintenance and Lubrication Lubrication Diagram Slide Tubes Inside 2 Slide Tube Carrier Bearings Buttons 16 A Step Lock Blocks 2 DE Slide Tube Step Hinge 2 Carrier Rollers 4 LO LO Step Lock Engagement Guides 4 DE Outer Platform Fold Bearings 2 LO Outer Barrier D Bracket Slots 2 LG Activation Foot Bearings 2 LO Outer Barrier Pivots 2 LO See the Maintenance Lubrication Schedule for recommended applications per number of cycles Specified recommended Lubricant Lubricant Amount Light Penetrating Oil LPS2 General Purpose 16 oz LO Light Oil 2 2 15807 30 weight or equivalent Penetrating Oil Aerosol Can Stainless Stick Door Ease 1 68 oz E 15806 DE Door Ease Style tube Stick tube LG Light Grease Light Grease Lubriplate 14 oz 15805 Multipurpose Can Page 10 Maintenance and Lubrication Schedule Proper maintenance is necessary to ensure safe trouble free operation Inspecting the lift for any wear damage or other abnormal conditions should be a part of the transit agency daily service program Simple inspections can detect potential problems The maintenance and lubrication procedures speci fied in the following schedule must be performed by a Braun authorized service
25. rocedures listed in previous section also Step lock blocks 2 Step lock engagement guides 4 Step hinges 2 Upright rollers 10 Slide tubes outside 2 Slide tubes inside 2 Slide tube carrier rollers 4 Inspect handrail for wear or damage and for proper securement Make sure lift operates smoothly Inspect external snap rings e clips Latch foot 2 Upright rollers 20 Main rollers 2 Inspect all threaded fasteners for damage and positive securement Remove pump module cover and inspect Hydraulic hoses fittings and connections for wear or leaks on pump Harness cables wires terminals and connec tions for securement or damage Apply Door Ease See Lubrication Diagram Apply Door Ease See Lubrication Diagram Apply Light Oil See Lubrication Diagram Use Light Grease during roller replacement Apply Light Oil See Lubrication Diagram Apply Door Ease to where platform upright UHMW bearings buttons contact slide tube See Lubri cation Diagram Apply Light Oil to inside surface of slide tubes See Lubrication Diagram Apply Light Oil See Lubrication Diagram Replace damaged parts Lubricate or correct as needed Resecure or replace if needed Resecure or replace damaged fasteners See Ex ploded View section for fasteners that require 242 General Purpose Blue Loctite Braun 18822 Resecure replace or correct as needed Perform all procedures
26. t for wear damage or any abnormal condition Inspect lift for rattles following the scheduled 4500 cycle maintenance procedures These intervals are a general guideline for scheduling maintenance procedures and will vary according to lift use and conditions Lifts exposed to severe conditions weather envi ronment contamination heavy usage etc may require inspection and maintenance procedures to be performed more often than specified AWARNING Maintenance and lubrication procedures must be performed as specified by an authorized service technician Failure to do so may result in and or property damage Discontinue lift use immediately if maintenance and lubrication procedures are not properly performed or if there is any sign of wear damage or improper operation Contact your sales representative or call The Braun Cor poration One of our national Product Support represen tatives will direct you to an authorized service technician who will inspect your lift Apply Light Oil See Lubrication Diagram Apply Light Oil See Lubrication Diagram Apply Light Grease to both sides of slot on each bracket See Lubrication diagram Apply Light Oil See Lubrication Diagram Correct or replace damaged parts and or relubri cate See Lubrication Diagram Correct as needed Correct as needed Page 11 continued Page 12 Maintenance and Lubrication Schedule Perform all p
27. te the outer platform 180 inward to stowed position stacked Manually position the step for stow as detailed below Red Stow Arrows Step positioned for stow Step Lock Bracket Guides Once the outer platform has been stowed the step can be manually po sitioned for stow lock Manually unlatch and lower rotate the step to a 45 angle Lock blocks at each end of the step align with engagement guides on yellow step lock brackets The step lock blocks en gage and travel the path of the locking engagement guides as the lift is lowered When the step reaches fully stowed position horizontal the step blocks lock fully in the engagement guides stopping lock ing the platform at proper position entry level Lift Operating Instructions Refer to the step by step Lift Operating Instructions provided in this manual and on lift posted decals Refer to the Manual Operating Instructions to manu ally operate lift Replace any missing worn or illeg ible decals Page 5 Lift Operating Instructions OPEN DOOR S AND SECURE TO DEPLOY LIFT 1 Align Green Arrows 4 Stand clear and press UP switch until lift reaches deploy level two green Deploy arrows align Note The step folds ro tates to vertical position and latches as lift raises 2 Deploy Platform Lift and rotate outer plat form to deployed position gt using h
28. to the terms of this limited warranty WHAT IS NOT COVERED This Limited Warranty does not cover any of the following defects in materials components or parts of the product not attributable to Braun any material component or part of the product that is warranted by another entity Note the written warranty provided by the manufacturer of the material component or part is the direct responsibility of that manufacturer items that are added or changed after the product leaves Braun s possession additional items installed at any dealership or other place of business or by any other party other than Braun normal wear tear usage maintenance service periodic adjustments the effects of condensation or moisture from condensation mold or any damage caused by mold imperfections that do not affect the product for its intended purpose items that are working as designed but that you are unhappy with problems related to misuse mishandling neglect or abuse including failure to maintain the product in accordance with the owner s manual or other routine maintenance such as inspections lubricating adjust ments tightening of screws sealing wheel alignments or rotating tires damage due to accident or colli sion including any acts of weather or damage or corrosion due to the environment theft vandalism fire or other intervening acts not attributable to Braun damage resulting from tire wear or tire failure defacing scratches dents or
Download Pdf Manuals
Related Search