console laundry wrapping station
Contents
1. AVIS AGING D im OPERATION AND SERVICE MANUAL WRAPPING INSTRUCTIONS SERVICE PARTS LIST ELECTRICAL DIAGRAM OPERATION AND SERVICE MANUAL WRAPPING A BUNDLE Holding bundle walk into the front of the ma chine This will push the sealing tray 1 into the machine Place the bundle onto the center of the work area 2 and pull wrapping film from front of the machine up making sure to grab enough film to wrap around bundle 3 Then wrap over the bundle and tuck at least three inches of film under the back of the bundle Holding both the film and the bundle several inches above the work area take a large step backward 4 which allows the sealing tray to automatically slide back out As you drop the bundle on the center of the plate the film will pull over the hot rod 5 and soften enough to tear This will start the bottom seal of the bundle To finish the seal of the bundle first lift the left side of the bundle 6 Continued CONSOLE LAUNDRY WRAP OPERATION ID SERVICE MANUAL WRAPPING A PACKAGE Holding up the bundle with your right hand 7 raise the upper left comer of the bundle With your left hand grab the center of the left end of the film and tuck film over the index fin er of your left hand and underneath the bundle and stretch it as far as you can then lower the left end onto the sealing platform 8 Repeat the above step to seal the right side of th2. dard 110 Volt Neon circuit tester can be used for this test POWER OUT POWERIN CHECKING FUSE With the power OFF disconnect red wire from Terminal 4 and secure it out of the way without touching any metal With power ON test across Terminals 3 and 4 If tester does not light replace fuse see service parts list for replacement number CHECKING HOT ROD With the power OFF disconnect red wire from Terminal 1 and secure it out of the way without touching any metal With power ON test between Terminal 1 and end of disconnected wire if tester does not light replace the hot rod CHECKING BOARD With the power OFF disconnect red wire from Terminal 1 and secure it out of the way without touching any metal With power ON test across Terminals 1 and 2 If tester does not light replace circuit board THIS UNIT SHOULD NOT OPERATED IF ROD TEMPERATURE EXCEEDS 275 F IF SMOKE OR FUMES ARE DETECTED DO NOT USE TO AVOID DAMAGE TO YOUR EQUIPMENT OR PERSONAL INJURY CONSOLE LAUNDRY WRAPPER RATION AND SERVICE MANUAL MACHINE FOOTPRINT AND FEATURES Sealing Plate 127130127 Sealing Tray 1571401727 2 2 e a Aiuminum Film Separator 7 CONSOLE LAUNDRY WRAP CONSOLE LAUNDRY WRAPPING STATION DAVIS PACKAGING wan davispackaging com Thomas J Davis Prosident
3. e bundle The bundle is now wrapped 9 CONSOLE LAUNDRY WRAP OPERATION AND SERVICE MANUAL SERVICE PARTS LIST PART NUMBER DESCRIPTION 1818 001 Circuit Control Board Without Heat Sink 1818 003 Circuit Control Board With Heat Sink 1821 005 2 Amp Fuse 1821 013 Fuse Holder 1824 014 Hot Rod Cut Off 43 1 4 Inches Long 104A40 1824 020 Hot Rod Cut Off 41 Inches Long 104436 1836 004 Pilot Light Assembly 1851 005 Power Cord With Cap 1872 008 Toggle Switch 1881 003 Thermostat B 10 2145 004 Thermostat Knob 5901 005 Teflon Cover 12 inches wide 30 inches long 6203 027 Hot Plate Assembly Includes Plate Wires Cover Elements and Mtg Screws 6203 033 Heating Element WARRANTY INFORMATION Standard factory warranty is ninety days on parts No charge for parts replacement if defective part or parts are returned within two weeks to Davis Packaging RATION AND SERVICE MANUAL WIRING DIAGRAM 1 Ground 2 Hot Plate 3 Terminal Block 4 Thermostat 5 Hot Rod 6 Wiro Nut 7 Electrical Control Box 8 Fuse Fuseholder 9 Indicator Light mum Black Wire 10 On Off Switch 11 Receptacle Tae 12 PC Board Red Wire 13 Ph ms To Ground Green 5 CONSOLE LAUNDRY WRAP ERATION AND SERVICE MANUAL ELECTRICAL TROUBLESHOOTING CIRCUIT BOARD TEST wawm Astan
Download Pdf Manuals
Related Search