NV915 - StairMaster De
Contents
1. Do not place heavy articles on or step on the LCD Monitor e The product should be installed in a clean and dry place o If you detect any smoke unusual noise or smell disconnect the electric power and contact service e Avoid contact with liquids or beverages e Do not use or place any combustible or flammable substances close to the LCD Monitor e Do not place the power cord close to any heating devices sources e Do not apply any twisting forces or excess pressure to the LCD Monitor e Do not attempt to disassemble repair or modify the LCD Monitor If the LCD Monitor needs repair or adjustment refer servicing to qualified service personnel e When cleaning do not directly spray with water or use flammable substances e Do not allow liquids to penetrate the LCD Monitor e When cleaning the LCD Monitor disconnect the power and use a clean soft cloth Never use a wet cloth A ATTENTION e Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment NV915 Product Specifications eZ NV915 LCD TV Monitor Gross Weight 12 5 Ibs 5 7 kg Net Weight 9 5 Ib 4 3 kg Product Dimensions 49cm L x 17cm W x 43cm H 19 3 L x 6 7 W x 16 9 H Power Requirements Adaptor Input 100 240V AC 50 60Hz Adaptor Output DC 12V 3 33A Regulatory Information FCC This device complies with2. Part 15 of the FCC and the Canadian ICES 003 regulations for Class A apparatus Operations is subject to the following two conditions 1 This device may not cause harmful Interferences and 2 This device must accept any interference received including interference that may cause undesired operation SR ne LCDTV Monitor NV915 O00N Model bears the CSA Mark shown with adjacent idicators C and US C US The LCDTV Monitor with PAL tuner bears the CE Mark and meets all safety and EMC requirements required by the European Union and Australia New Zealand For Customers in the European Union Do not dispose of this product as refuse This product is to be recycled For information on the proper method of disposal contact a Nautilus Customer Service Representative Contact information is available in the Important Contact Numbers section in this manual The LCDTV Monitor with PAL tuner is RoHS compliant Nautilus NV915 Service Manual 5 Safety Warning Labels aS The following safety warnings are located on the NV915 LCD Monitor Please read all safety precautions and warning information prior to using your product ACAUTION TAIS RISQUE DE RISK OF ELECTRIC SHOCK DO NOT OPEN CHOC ELECTRIQUE NE PASS OUVRIR Exploded View M Series Bracket Kit NV915 M Series Bracket for Wired Models REF PART DESCRIPTION 1 00 1915 M Series Bracket Kit Complete O O O O O OOOO 2 oor t694 ConsoeSpaer O OO oO
3. not used in this configuration For alternative configurations please refer to the LCD Monitor owners manual Antenna Power Connections are REVERSED for the NV915 LCD Digital Monitor Nautilus NV915 Service Manual 97 Replacing LCD Monitor Replacing T Series LCD Monitor continued Bracket Back Cover Step 7 Replace the Back Covers Tools Needed Phillips Head Screwdriver 7 1 Replace the Back Cover of the Bracket Figure A and the LCD Monitor Figure B NOTE Use the two longer screws on the raised portion of the LCD Monitor Back cover Detail A FigureA Use longer screws here ee be be We ee Figure B Detail A 28 Important Contact Numbers O OO O If you need assistance please have both the serial number of your machine and the date of purchase available when you contact the appropriate Nautilus office listed below OFFICES IN THE UNITED STATES E mail cstech nautilus com e TECHNICAL CUSTOMER SERVICE Nautilus Inc World Headquarters 16400 SE Nautilus Drive Vancouver Washington USA 98683 Phone 800 NAUTILUS 800 628 8458 Fax 877 686 6466 e CORPORATE HEADQUARTERS Nautilus Inc World Headquarters 16400 SE Nautilus Drive Vancouver Washington USA 98683 Phone 800 NAUTILUS 800 628 8458 INTERNATIONAL OFFICES For technical assistance and a list of distributors in your area please call or fax one of the following numbers e INTERNATIONAL CUSTOMER SERVICE
4. 5 4 Completely tighten the M10 Allen Bolts 30 Range Detail A 30 Range Figure B Figure C 20 Replacing LCD Monitor Replacing M Series mast mount LCD Monitor continued Step 6 Connect Wires to Monitor The connections shown are for Pre Wired units with Coaxial and power connections only For alternative configurations please refer to the LCD Monitor owners manual IMPORTANT You must wire tie the Power Wire to the LCD Bracket to avoid accidental disconnection NOTE f you are using the optional Wired Remote attach the end labeled LCD TV at this time Refer to Wired Remote Installation Manual for more information NOTE nternational version will require supplied Coaxial Connection Adapter International Coaxial Adapters Power Antenna These connections are not used in this configuration For alternative configurations please refer to the LCD Monitor owners manual Antenna Power Connections are REVERSED for the NV915 LCD Digital Monitor Nautilus NV915 Service Manual 914 Replacing LCD Monitor Replacing M Series mast mount LCD Monitor continued Step 7 Replace the Back Covers Tools Needed Phillips Head Screwdriver Bracket Back Cover 7 1 Replace the Back Cover of the Bracket Figure A and the LCD Monitor Figure B NOTE Use the two longer screws on the raised portion of the LCD Monitor Back cover Detail A FigureA Use longer screws he
5. Cover Tools Needed Phillips Head Screwdriver 4 1 Use a Phillips Head Screwdriver to remove the Back Cover of the LCD monitor Figure A FigureA Nautilus NV915 Service Manual 95 Replacing LCD Monitor Replacing T Series LCD Monitor continued Step 5 Attach the LCD Monitor Tools Needed LCD Monitor 6mm Allen wrench 5 1 Position the LCD Monitor on the Bracket Figure A with the Metal Tabs resting between the upright prongs Detail A 5 2 Re Install the M10 Allen Bolts and Lock washers 5 3 Position the LCD Monitor Figure B amp C Note The Monitor has a 30 range of viewing angles Position at your discretion Figure B amp C 5 4 Completely tighten the M10 Allen Bolts 30 Range 30 Range ay Detail A Figure C Figure B Replacing LCD Monitor Replacing M Series mast mount LCD Monitor continued Step 6 Connect Wires to Monitor The connections shown are for Pre Wired units with Coaxial and power connections only For alternative configurations please refer to the LCD Monitor owners manual IMPORTANT You must wire tie the Power Wire to the LCD Bracket to avoid accidental disconnection NOTE f you are using the optional Wired Remote attach the end labeled LCD TV at this time Refer to Wired Remote Installation Manual for more information NOTE nternational version will require supplied Coaxial Connection Adapter Power Antenna These connections are
6. M Be Strong NAUTILUS NV915 LCD Monitor Service Manual Table of Contents FCC Information ccccccscssssecssceeeeseeseeeeeseeeesaeeas 3 Important Safety Precautions cccceceeeee 4 Product Specifications ccccccsssssssssseseeeeeees 5 Location of Safety Warning Labels 6 Exploded Views and Parts Lists 0c0s000 7 Troubleshooting ccccseceeseeeeeeeeeeeeeeeeeneeeenseeees 13 Replacing Headphone Jack csceeeeeeeeeees 14 Replacing Keypad Replacing LCD Monitor M Series Bracket 17 Replacing LCD Monitor T Series Bracket Important Contact Numbers sasssassssssssnsssnsnnnns 29 FCC Information FCC Information This equipment has been tested and found to comply with limits for a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment can generate uses and radiates radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation lf this equipment does cause unacceptable interference to radio and television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct th
7. Nautilus International S A Rue Jean Prouve 6 1762 Givisiez Switzerland Tel 41 26 460 77 77 Fax 41 26 460 77 70 Email technics nautilus com INTERNATIONAL OFFICES e SWITZERLAND OFFICE Nautilus Switzerland S A Tel 41 26 460 77 66 Fax 41 26 460 77 60 e GERMANY and AUSTRIA OFFICE Nautilus GmbH Tel 49 2204 610 27 Fax 49 2204 628 90 e ITALY OFFICE Nautilus Italy s r l Tel 39 031 51 10 86 Fax 39 031 34 24 97 e UNITED KINGDOM OFFICE Nautilus UK Ltd Tel 44 1908 267 345 Fax 44 1908 267 346 e CHINA OFFICE Nautilus Representative Office Tel 86 21 523 707 00 Fax 86 21 523 707 09 Nautilus NV915 Service Manual 99 CO NAUTILUS Be Strong For more information about the NV915 LCD Monitor or other Nautilus equipment visit www nautilusinc com 2007 Nautilus Inc All rights reserved Nautilus the Nautilus logo and Be Strong are either registered trademarks or trademarks of Nautilus Inc All other marks are either registered trademarks or trademarks of their respective companies Nautilus Inc World Headquarters 16400 SE Nautilus Drive Vancouver Washington USA 98683 1 800 628 8458 www Nautilus com
8. ct Wires From Monitor 2 1 Disconnect the Power Antenna and Remote if using optional wired remote wires from the LCD Monitor Optional Wired Remote wires NOTE International version will have Coaxial Connection Adapter International Coaxial Adapters Power Antenna Antenna Power Connections are REVERSED for the NV915 LCD Digital Monitor 18 Replacing LCD Monitor Replacing M Series mast mount LCD Monitor continued LCD Monitor Bracket M10 Allen Bolt Step 3 Remove the LCD Monitor Tools Needed 6mm Allen wrench 3 1 Use a 6mm allen wrench to remove the M10 Allen Bolts on each side of the Bracket E Figure A Step 4 Prepare to install the new LCD Monitor Back Cover Tools Needed Phillips Head Screwdriver 4 1 Use a Phillips Head Screwdriver to remove the Back Cover of the LCD monitor Figure A Figure A Nautilus NV915 Service Manual 19 Replacing LCD Monitor Replacing M Series mast mount LCD Monitor continued CD Monitor Bracket Step 5 Attach the LCD Monitor Tools Needed 6mm Allen wrench 5 1 Position the LCD Monitor on the Bracket Figure A with the Metal Tabs resting between the upright prongs Detail A 5 2 Re Install the M10 Allen Bolts and Lock Washers 5 3 Position the LCD Monitor Figure B amp C Figure A Metal Tab Note The Monitor has a 30 range of viewing angles gs Prong Position at your discretion Figure B amp C
9. e interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced Radio TV technician for assistance A ATTENTION e Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Nautilus NV915 Service Manual 3 Important Safety Precautions To reduce the risk of fire electrical shock or M P O R TA N T other injuries follow these safety precautions i i when installing using and maintaining your Save these instructions NV915 LCDTV Monitor Read all instructions before using BA This symbol appearing throughout this manual means WA R N N lt Pay Attention Be Alert Your Safety Is Involved WARNING e Always disconnect the power before installing or servicing the equipment e Disconnect the power cable and signal cable when thunder or lightning is present e Do not touch the power cord with wet hands Make sure the electrical connectors are clean and dry before use e Disconnect the power cord when not in use for extended periods of time e Do not use if power cord is damaged e Do not install LCD Monitor close to heating sources e
10. igure D Remove the old Keypad from the slot it the plastic Figure E Continued on next page Ribbon Cable Ribbon Cable y Figure A Figure B Figure C Keypad Figure D Figure E Nautilus NV915 Service Manual 15 Replacing Keypad en eee gS Replacing Keypad Continued 5 Insert the new Keypad ribbon cable through the slot with the adhesive side toward the bottom of the LCD Figure F 6 Peel off the Adhesive Backing Figure G 7 Position the Keypad on the plastic and firmly press into place Figure H amp I 8 Turn the LCD over and insert the Ribbon Cable into the connector Figure J 9 Replace the Back Cover Figure K Adhesive Side Figure F Figure G Figure H Figure K 16 Replacing LCD Monitor Replacing M Series mast mount LCD Monitor To avoid the risk of electrocution shock or mechanical injury before performing this maintenance ensure that the LCD Monitor is unplugged Step 1 Remove the Back Covers Tools Needed Phillips Head Screwdriver 1 1 Remove the Back Cover of the LCD Monitor Figure A and the Bracket Figure B NOTE Two longer screws used on the raised portion of the LCD Monitor Back cover Detail A FigureA Bracket Back Cover Longer screws used here Figure B Detail A Nautilus NV915 Service Manual 17 Replacing LCD Monitor nee ieee evs sss Replacing M Series mast mount LCD Monitor continued Step 2 Disconne
11. o 3 oor1959 M Series Bracket Kit installation Manual a 001944 M Series Replacement Hardware Kit Use if replacement Hardware is needed Nautilus NV915 Service Manual 7 Exploded View LCD Monitor Kit SN CS Z Gps lt amp RS D C C C C REF PART DESCRIPTION a oor t924 LCD Monitor with Accessories US a oar t992 LCD Monitor with Accessories Euro lt 1 oar 2013 LCD Monitor with Accessories Australia S S S 1 002 3782 LCD Monitor DT with Accessories Digital 2 four t922 PowerCord u O OOOO SS O 2 omzms Power Cord Continental O O O 2 oar 2019 Power Cord Australi OOOO S 2 oor 2017 Power Cord UK reland OOOO 3 oomss8 harawene OOOO S O a 000 8010 Powers OOOO aooo LcD DT Power Brick Digian O O o s 001 1995 European Adapter Kit Europe Austratia Oniy 6 oor 1923 OwnersManual CDROM O o 6 oor 746y Owners Manual Digital CDROM Exploded View LCD Monitor Components REF PART DESCRIPTION 2 001 1945 Earphone Jack Nautilus NV915 Service Manual 9 Exploded View T Series Bracket Kit T Series Bracket Installation Instructions for Prewired Models REF PART DESCRIPTION To 001 1948 T Series Bracket Kit Complete 2 001 1960 T Series Bracket Kit Installation Manual 3 001 1955 T Series Replacemen
12. re Figure B Detail A 22 Replacing LCD Monitor Replacing T Series LCD Monitor To avoid the risk of electrocution shock or mechanical injury before performing this maintenance ensure that the LCD Monitor is unplugged Step 1 Remove the Back Covers Tools Needed Phillips Head Screwdriver 1 1 Remove the Back Cover of the LCD Monitor Figure A and the Bracket Figure B NOTE Two longer screws used on the raised portion of the LCD Monitor Back cover Detail A FigureA Bracket Back Cover Use longer screws here yy a Bb DARRI Figure B Detail A Nautilus NV915 Service Manual 23 Replacing LCD Monitor nee n Replacing T Series LCD Monitor continued Step 2 Disconnect Wires From Monitor 2 1 Disconnect the Power Antenna and Remote if using optional wired remote wires from the LCD Monitor Optional Wired Remote wires NOTE International version will have Coaxial Connection Adapter International Coaxial Adapters Power Antenna Antenna Power Connections are REVERSED for the NV915 LCD Digital Monitor 24 Replacing LCD Monitor Replacing T Series LCD Monitor continued LCD Monitor Step 3 Remove the old LCD Monitor Tools Needed 6mm Allen wrench 3 1 Use a 6mm allen wrench to remove the M10 Allen Bolts on each side of the Bracket M10 Allen Bolt FigureA Detail A Step 4 Prepare to install the new LCD Monitor Back
13. rs wireless phones power tools etc can cause interferrence e Execute the fine tuning adjustment Can t Store a Specific Channel e Check whether Channel Setting is set to Normal No Sound e Press the Mute button e Press the Volume Up button e Replace Headphone Jack Remote Doesn t Work eTry the remote on another LCD Display if available e Make sure you have fresh batteries e Check or replace the Headphone Jack on the front of the LCD Monitor Nautilus NV915 Service Manual 13 Replacing Headphone Jack NS Over time the Headphone Jack may become worn and fail to function properly Replacing Headphone Jack Tools Needed Phillips Head Screwdriver Parts Needed Headphone Jack Kit Part 001 1945 1 Remove the Decal covering the Headphone Jack Figure A 2 Use a Phillps Head Screwdriver to remove the two screws securing the jack Figure B 3 Carefully remove the Headphone Jack from the LCD Monitor Figure C and disconnect the wires Figure D 4 Reverse the procedure to install the jack Figure C Figure A Figure D Replacing Keypad Over time the Keypad may become worn and fail to function properly Replacing Keypad Tools Needed Parts Needed Phillips Head Screwdriver Keypad Part 001 2033 Remove the Back Cover of the LCD Monitor Figure A Carefully pull the Ribbon Cable out of the connector Figure B amp C Gently lay the LCD on it s back and peel off the old Keypad F
14. t Hardware Kit Use if replacement Hardware is needed 10 Exploded View aN Remote Controls K YQ XQ Wireless Remote Wired Remote REF PART DESCRIPTION 001 1939 Wireless Remote Kit US 002 3785 Wireless Remote Kit US Digital 001 2028 Universal Wired Remote Kit 1 001 2081 Wireless Remote Kit International Nautilus NV915 Service Manual 11 Exploded View a Free Stand Kit REF PART DESCRIPTION 1 001 2074 Stand Shroud Replacement Kit 2 001 1934 Upright Assembly 3 001 1851 Adjustable Mast Assembly 4 001 1935 Base Assembly 5 001 2049 Stabilizer B 6 001 2050 Stabilizer A Stand Assembly Instruction Manual 8 001 2035 Stand Hardware Kit 9 Stand Wire Harness Troubleshooting Poor Sound or Display Quality e Make sure the Antenna is properly connected to the LCD Monitor lower connection on the unit and the video source e Check the Antenna Cable for damage No Image e Make sure the Antenna is properly connected to the LCD Monitor lower connection on the unit and the Video source e Check the Antenna Cable for damage e Make sure the Power Cord is properly connected to the unit and a wall outlet e Press POWER button on remote Black Background Only e Make sure the mode is set to TV and not PC or Video S Video when using a coaxial cable input source Interference or Shaky Display e Other appliances such as hair dyre
Download Pdf Manuals
Related Search