Home

Istruzioni per l`uso Instructions for use - Tecno-Gaz

image

Contents

1. utilizzare acqua o solventi per pulire il Fusore per cera Agire sui pulsanti in maniera corretta cio premendoli in modo dolce e senza forzare Non oliare ingrassare nessuna parte del per interna o esterna 5 DWAF043 doc v TECNO GAZ CIO PAR 4 CARATTERISTICHE TECNICHE vedi Par 9 Peso 425 9 Profondit P 150 mm Larghezza L 85 mm Altezza H 55 mm Diametro forno D 45 mm Profondit forno Z 21mm Tensione Di Alimentazione 230 V AC Potenza Massima Assorbita 50W Tipo di Protezione Doppio isolamento Cavo di Alimentazione L 1 3 Metri 2 X 0 75 mm Temperatura Massima impostabile 120 C PAR 5 IMBALLO TRASPORTO E STOCCAGGIO Il fusore per cera ha un peso esiguo ed un volume contenuto perci non ha bisogno di un imballo speciale in dotazione per proteggerlo da urti Il Fusore per Cera protetto e chiuso in una scatola di cartone ondulato sigillata da nastro adesivo Il trasporto deve avvenire senza scosse urti e senza esporre il prodotto imballato all umidit ATTENZIONE Non disperdere il materiale di imballo nell ambiente recuperare i prodotti riciclabili ed affidare i rimanenti ad un impresa di smaltimento rifiuti prodotti imballati devono essere custoditi in luoghi asciutti e ad una temperatura compresa tra 10 40 C PAR 6 IMPIEGO DEL FUSORE PE
2. IN O QO O N a DESCRIPTION OF THE UNIT 12 DWAF043 doc v TECNO GAZ PAR 3 OPERATOR S SAFETY INSTRUCTIONS Supply the Wax Melter ONLY and EXCLUSIVELY with the cable supplied by TECNO GAZ with the melter At the end of the use switch off the melter pressing the on off switch and unplug the cable from the electric system socket Use the Wax Melter under the hood During the machine functioning keep the lid open The melter quits TECNO GAZ with arrival temperature set to 90 C Carefully read this Instruction Manual before using the Wax Melter The Wax Melter has to be plugged to a mono phase electric socket with 230 V operating voltage with 50760 Hz frequency The power supply plug has to be protected with a magnetothermal switch with safety power cutoff Do not interrupt the Wax Melter power supply with adapters or reducers The operator has to position the supply plug in an easily accessible place The operator has not to leave the Wax Melter unattended during its functioning The operator has to position the Wax Melter on an horizontal plane with control board easily accessible During the Wax Melter use the operator has to wear suitable Personal Protection Means to avoid risks of burns Switch off the Wax Melter and let it cool with open lid before storage For a safe use the operator has to set the melting temperature indicated by the wax pro
3. R CERA Il fusore per cera deve essere utilizzato esclusivamente per riscaldare cera normalmente utilizzata dai tecnici dentali La massima temperatura di riscaldamento di 120 C Se l apparecchio non viene utilizzato secondo le avvertenze eventuali richieste di risarcimento o reclami non saranno accettati AVVERTENZE Assicurarsi che solo odontotecnici qualificati e persone autorizzate possano utilizzare l apparecchio Leggere sempre il manuale istruzioni allegato prima di utilizzare il dispositivo Contattare il produttore in caso di dubbi Utilizzare l apparecchio solo all asciutto Assicurarsi che l apparecchio sia in posizione orizzontale e stabile Tenere lontano da materiali infiammabili rischio di incendio Ogni modifica o manomissione al dispositivo a rischio e pericolo dell utilizzatore e comporta l automatico decadimento della garanzia e della possibilit di reclamo Disconnettere l alimentazione elettrica prima di agire sull apparecchio Non usare solventi per pulire l apparecchio Utilizzare solo cera specifica per tecnici dentali Non immergere in acqua In caso di restituzione dell apparecchio es per riparazioni assicurare un buon imballaggio A UTILIZZARE IL FUSORE PER CERA SOTTO UNA CAPPA ASPIRANTE 6 DWAF043 doc v TECNO GAZ CIO PAR 7 UTILIZZO PROBLEMI RICAMBI vedi Par 9 ISTRUZIONI OPERATIVE PRIMA DI METTERE IN FUNZIONE L APPARECCHIO Il fusore per cera utilizza le pi recen
4. TECNO GAZ does not admit restitution from final users Only the retailer or the after sales assistance centre chosen by the user will be admitted to sent back to TECNO GAZ the components to be repaired according to the commercial procedure CM P 003 called MANAGEMENT OF REQUEST FOR RESTITUTION REPAIRING REPLACEMENT OF TECNO GAZ EQUIPMENT AND CLIENT COMPLAINTS Components being sent back to TECNO GAZ must be accompanied by the correct documentation according to our internal procedures The products being sent back to TECNO GAZ must bear attached the documentation that authorizes the return and a note describing the failure All the components that need to be repaired must be sent to TECNO GAZ carriage paid and properly packed original packaging is recommended 3 DWAF043 doc v TECNO GAZ ITALIANO INDICE PAR TITOLO v gt o DICHIARAZIONE DI CONFORMIT CE GARANZIA AVVERTENZE PER LA SICUREZZA DELL OPERATORE CARATTERISTICHE TECNICHE IMBALLO TRASPORTO E STOCCAGGIO IMPIEGO DEL FUSORE PER CERA UTILIZZO PROBLEMI RICAMBI ROTTAMAZIONE E DEMOLIZIONE N IN O O a A W N IN O W N DESCRIZIONE DELL APPARECCHIO N DWAF043 doc v TECNO GAZ CIO PAR 3 AVVERTENZE PER LA SICUREZZA DELL OPERATORE Alimentare il Fusore per cera SOLO ed ESCLUSIVAMENTE con il cavo fornito da TECNO GAZ insieme al fusore A fine util
5. and electromechanic components Do not dispose of the machine in unattended areas apply to authorised dumps COMPLY WITH RULES IN FORCE IN THE USE COUNTRY AS TO WASTE DISPOSAL SCRAPPING OR DEMOLITION OF PLASTIC FERROUS ELECTRONIC MATERIALS 1 1 DWAF043 doc v TECNO GAZ PAR 9 DESCRIZIONE DELL APPARECCHIO DESCRIPTION OF THE UNIT CROGIOLO POT CAVO DI ALIMENTAZIONE POWER CABLE TASTI DI REGOLAZIONE DISPLAY TASTO ON OFF _ SET BUTTONS ON OFF BUTTON COPERCHIO CAP 1 2 DWAF043 doc Tel 39 0521 83 39 26 r a ll presente manuale deve sempre accompagnare il prodotto in adempimento alle Direttive Comunitarie Europee TECNO GAZ si riserva il diritto di apporre modifiche al presente documento senza dare alcun pre avviso La ditta TECNO GAZ si riserva la propriet del presente documento e ne vieta l utilizzo o la divulgazione a terzi senza il proprio benestare dental and medical lt 7 TECNO GAZ equipment TECNO GAZ S p A Strada Cavalli N 4 e 43038 e Sala Baganza e Parma e ITALIA www tecnogaz com This manual must always be kept with the product in complying with the Directives of European Community TECNO GAZ reserves the right to modify the enclosed document without notice TECNO GAZ reserves the property of the document and forbids others to use it or spread it without its approval gt Ce manual doit tre gard avec le produit c
6. and eventually refill Do not exceed quantity OPERATION e Put the plug into an appropriate socket Press the power on off button at the front display of the unit e Atthe wax pot the temperature control is operated via a digital controller Further temperature changes can be effected pressing the buttons A and V The unit can show both the set temperature as well as the effective temperature via the display When pressing the buttons A and Y the led display shows firstly the set temperature and after 2 seconds goes back to the actual temperature After the temperature chosen is reached quickly use the wax For an accelerated cooling down eventually open the top lid cover After cooling down carefully remove the superfluous wax Turn off the unit after use Wait until the unit is cold before storing Never overheat wax risk of fire Always make sure that the unit and the cables don t get into contact with any flame or burner TROUBLE SHOOTING LIST Problems Solutions Unit does not start and shows no led display Check the cable and the plug Melted wax is not sufficiently mixed Keep the cover closed when heating up Enclosures are broken Return unit to TECNO GAZ SPARE PARTS AND ACCESSORIES Power cable SWAA034 PCB large SWAA036 Pcb small SWAA037 Pot SWAA038 PC case SWAA039 PAR 8 SCRAPPING AND DEMOLITION The Wax Melter is made of plastic and ferrous materials inert electronic
7. avel expenses of personnel neither packaging nor transport expenses The warranty does not cover lamps fuses glasswork and the failure or damages caused by wrong maintenance negligence unskilfulness or any other cause the manufacturer is not to be hold responsible for Those components and equipment subjected to regular wearing out ex push buttons brushes for electric motors bearing movable parts etc are not covered by the warranty TECNO GAZ does not recognize the right to have the whole machine replaced The warranty does not meet any request of indemnity for direct or indirect damages caused to goods and persons provoked by the inefficiency of the machine TECNO GAZ will not admit responsibilities for failures or damages caused by the wrong use of the product or damages caused by the omission of the ordinary maintenance or the elementary principles for a correct maintenance negligence TECNO GAZ does not recognize any indemnity in case the machine is not used The warranty will be automatically declined in case the machine is tampered repaired or modified by the client or by third parties not been authorized by TECNO GAZ The purchaser is compelled to contact the retailer or after sales services centre indicated by TECNO GAZ for the repairing The components repaired during warranty period must be sent back to TECNO GAZ carriage paid In case the replaced components are not been sent back to TECNO GAZ the purchaser will be charged for them
8. che n il dispositivo n i cavi vadano a contatto con fiamme libere bruciatori PROBLEMI E POSSIBILI SOLUZIONI Problemi Possibili soluzioni L apparecchio non parte il display non si Controllare che il cavo di alimentazione sia ben inserito accende La cera sciolta non sufficientemente omogenea Tenere il coperchio chiuso durante il riscaldamento La cover in plastica danneggiata o rotta Inviare l apparecchio al costruttore RICAMBI E ACCESSORI Cavo di alimentazione SWAA034 Scheda elettronica grande SWAA036 Scheda elettronica piccola SWAA037 Crogiolo SWAA038 Cover in plastica SWAA039 PAR 8 ROTTAMAZIONE E DEMOLIZIONE Il Fusore per cera costituito da materiali plastici ferrosi e componenti elettronici ed elettromeccanici inerti Non abbandonare l apparecchio in luoghi non custoditi affidare la rottamazione ad imprese di smaltimento autorizzate ATTENERSI ALLE LEGGI VIGENTI NEL PAESE DI UTILIZZO IN MATERIA DI RIFIUTI ROTTAMAZIONE O DEMOLIZIONE DI MATERIALI PLASTICI FERROSI ELETTRONICI 7 DWAF043 doc v TECNO GAZ ENGLISH INDEX PAR TITLE PAGE CE DECLARATION OF CONFORMITY WARRANTY OPERATOR S SAFETY INSTRUCTIONS TECHNICAL FEATURES 10 PACKAGING TRANSPORTATION AND STORAGE 10 USE OF THE WAX MELTER 10 USE PROBLEMS SPARE PARTS 11 SCRAPPING AND DEMOLITION 11
9. ducer Do not use water or solvents to clean the Wax Melter Use buttons correctly that is press them softly without forcing them PIP Al AT AR AR gt gt bb e Do not grease any internal or external part of the Wax Melter 9 DWAF043 doc TECNO GAZ PAR 4 Technical features of the WAXY melter see Par 9 Weight 425 g Depth D 150 mm Width W 85 mm Height H 55 mm Furnace diameter D 45 mm Furnace depth Z 21 mm Power voltage 230 V AC Maximum absorbed power 50W Protection Double insulation Power cable L 1 3 m 2 X 0 75 mm Maximum temperature to select 120 C PAR 5 PACKAGING TRANSPORTATION AND STORAGE The wax melter is quite light and has a small size it hence needs not special packaging to protect it from shocks The Wax Melter is protected and housed into a corrugated board box sealed with adhesive tape During transportation the package has to be protected from bumps or shocks and humidity ATTENTION Do not disperse packaging materials into the environment recycle reusable products and give the remaining ones to a company specialized in waste disposal Packed products have to be stored in dry places at a temperature of 10 C to 40 C PAR 6 USE OF THE WAX MELTER Wax pot is to be used exclusively for warming up dipping waxes used by dental technician Maximum temperature is 120 C for warming up When n
10. i assistenza indicati da TECNO GAZ componenti sostituiti in garanzia devono essere restituiti a TECNO GAZ in porto franco La mancata restituzione comporta l addebito del costo del particolare al richiedente TECNO GAZ non accetta rientri da utilizzatori finali Il rientro in TECNO GAZ per riparazione deve essere gestito dal rivenditore o dal centro d assistenza scelto dall utilizzatore finale in conformit alle procedure commerciali CM P 003 intitolata GESTIONE DELLE RICHIESTE DI RIENTRO RIPARAZIONE SOSTITUZIONE DEI PRODOTTI TECNO GAZ E RECLAMI CLIENTE Il rientro in TECNO GAZ deve essere documentato e autorizzato come da procedure interne prodotti che rientrano in TECNO GAZ devono avere allegata la documentazione d autorizzazione al rientro e un documento in cui sia descritto il guasto Tutti i prodotti in riparazione devono essere spediti a TECNO GAZ in porto franco e adeguatamente imballati si consiglia di utilizzare l imballo originale The appliance is covered by a warranty period of twelve months The warranty begins the date the machine is delivered to the client such date must appear on the warranty coupon which must be properly filled in stamped and signed by retailer and then sent back to TECNO GAZ In case of complains it will be considered valid the date appearing on the delivered note Repairs or replacement under warranty conditions of any components will be exclusively carried out by TECNO GAZ the warranty does not cover tr
11. izzo spegnere il Fusore premendo l interruttore on off e staccare la spina del cavo dalla presa dell impianto elettrico Utilizzare il Fusore per cera sotto una cappa aspirante Durante il funzionamento tenere il coperchio aperto Il fusore esce da TECNO GAZ con la temperatura di arrivo impostata a 90 c Leggere attentamente il presente Manuale Istruzione prima di utilizzare il Fusore per Cera Il Fusore per cera deve essere collegato ad una presa elettrica monofase con tensione d esercizio 230 V con frequenza 50760 Hz La presa di alimentazione deve essere protetta da un interruttore magnetotermico differenziale salvavita Non interporre con adattatori o riduzioni l alimentazione elettrica dell alimentatore del Fusore per cera L operatore deve posizionare la presa d alimentazione in loco facilmente accessibile L operatore deve sempre sorvegliare il Fusore per cera durante il funzionamento L operatore deve posizionare il Fusore per cera su di un piano orizzontale con la plancia di comando facilmente accessibile L operatore durante l utilizzo del Fusore per Cera deve indossare adeguati dispositivi di protezione individuale DPI onde evitare rischi di ustioni o scottature Spegnere il Fusore per cera e lasciarlo raffreddare a coperchio aperto prima di riporlo Per avere un utilizzo sicuro l operatore deve impostare la temperatura di fusione indicata dal produttore della cera Non
12. l Verbale d istallazione debitamente compilati timbrati e firmati dal rivenditore In caso di contestazione ritenuta valida la data indicata sulla bolla di vendita La riparazione o la sostituzione in garanzia di un particolare effettuata ad insindacabile giudizio della ditta TECNO GAZ e non comprende la trasferta del personale le spese d imballaggio e trasporto Sono escluse dalla garanzia lampade fusibili vetrerie ed i guasti o i danni derivati da una cattiva manutenzione negligenza imperizia o altre cause non imputabili al costruttore componenti soggetti a normale usura e gli accessori es pulsanti spazzole per motori elettrici cuscinetti organi in movimento ecc non sono compresi nella garanzia Non riconosciuto il diritto alla sostituzione della macchina completa La garanzia non comporta alcun risarcimento danni diretti o indiretti di qualsiasi natura verso persone o cose dovuti all inefficienza della macchina TECNO GAZ non risponde di guasti o danni causati dal prodotto usato impropriamente o sul quale non sia praticata la manutenzione ordinaria o siano trascurati gli elementari principi del buon mantenimento negligenza Non viene riconosciuto nessun risarcimento per fermo macchina La garanzia decade automaticamente qualora la macchina venga manomessa riparata o modificata dall acquirente o da terzi non autorizzati da TECNO GAZ Per gli interventi l acquirente deve rivolgersi unicamente al rivenditore oppure ai centri d
13. onform ment aux Directives de la Communaut Europ enne TECNO GAZ se r serve la facult de faires des changements ce document sans aucun pr avis TECNO GAZ se r serve la propri t de ce document et en emp che l utilisation ou la divulgation sans son consentement DI Dieses Handbuch ist nach den CEE Normen immer mit dem Produkt auszuliefern TECNO GAZ beh lt sich nderungen an dem Dokument vor Der Inhalt dieses Dokumentes ist urheberrechtlich gesch tzt Jede weitergehende Verwendung insbesondere jede Form der gewerblichen Nutzung sowie die Weitergabe an Dritte auch in Teilen oder in berarbeiteter Form ist ohne Zustimmung der Firma TECNO GAZ untersagt Fax 39 0521 83 33 91 GRO Este manual debe siempre acompa ar el producto en cuplimiento a las Directivas Europeas TECNO GAZ se reserva de derechi de aportar modificaci nes a este documento sin ningum aviso La impresa TECNO GAZ se reserva la propiedad de este documento y veda el utilizzo o la divulgaci n a terceros sin su aprobaci n
14. ot used according to recommendations claims for liability cannot be accepted CAUTION Ensure that only qualified dental technicians and authorized persons are allowed to use these machines Always read instructions before use Contact manufacturer if there are any queries Operate this unit only in dry conditions Always make surethe unit is horizontal and stable Keep away from flammable materials risk of fire Any modification to the unit or grip is exclusively at the user own risk and will lead to loss of warranty and liability Pull out the plug before opening the unit Do not use any solvents tfor cleaning the unit Use only waxes determined for dental techniques Do not immerse in water Please ensure safe packing when returning a unit e g for repair A USE THE WAX MELTER UNDER A HOOD 1 0 DWAF043 doc v TECNO GAZ PAR 7 USE PROBLEMS SPARE PARTS see Par 9 OPERATING INSTRUCTIONS BEFORE PUTTING INTO OPERATION Wax pots follow the latest technical developments and comply with standard safety regulation Nevertheless users are advised to pay due care attentions to the operating instructions e Ensure the unit is kept in a clean condition at all times e Observe the standard recommendations for safety at work e The unit should be used by the skilled and authorized personnel only e Check the unit for technical problems especially the cables and the housing e Check the wax quantity in the tank
15. ti innovazioni tecnologiche in accordo con la normativa sugli standard di sicurezza Tuttavia gli operatori devono attenersi con scrupolo alle istruzioni operative e mantenere sempre il dispositivo pulito osservare le norme in tema di sicurezza sul lavoro il dispositivo deve essere utilizzato solo da personale qualificato ed autorizzato fare attenzione ad eventuali danni al dispositivo specie al cavo e alla cover in plastica e fare attenzione alla quantita di cera rimanente nel crogiolo ed eventualmente aggiungerne senza eccedere MODO D USO Inserire la spina in una presa di rete appropriata Premere il pulsante ON OFF sul pannello frontale Il controllo della temperatura effettuato da un dispositivo digitale Le successive variazioni di temperatura possono essere effettuate premendo i tasti A oppure Y Il dispositivo visualizza sia la temperatura impostata che la temperatura effettiva tramite il display Premendo i tasti A e V il display mostra dapprima la temperatura di impostazione dopo 2 secondi torna ad indicare la temperatura attuale Raggiunta la temperatura utilizzare la cera Per accelerare il raffreddamento eventualmente aprire il coperchio del crogiolo Dopo il raffreddamento rimuovere attentamente la cera superflua spostando il coperchio Spegnere il dispositivo dopo l uso e Attendere che il dispositivo si sia raffreddato prima di riporlo Non surriscaldare la cera rischio di incendio Controllare
16. v TECNO GAZ dental and medical equipment Istruzioni per l uso Instructions for use WAXY Art 4080 S 2 CE De v TECNO GAZ ITALIANO PAG 4 7 ENGLISH PAG 8 11 1 DWAF043 doc v TECNO GAZ PAR 1 DICHIARAZIONE DI CONFORMIT CE CE DECLARATION OF CONFORMITY La sottoscritta TECNO GAZ S p A ubicata in Strada Cavalli n 4 43038 Sala Baganza Parma Italia dichiara sotto la propria responsabilit che il FUSORE PER CERA The undersigned TECNO GAZ S p A seated in Strada Cavalli n 4 43038 Sala Baganza Parma Italy declares under its own responsibility that the WAX MELTER Art 4080 S 2 TARGHETTA PLATE costruito da TECNO GAZ S p A conforme alle disposizioni legislative che traspongono la Direttiva Bassa Tensione 73 23 CEE la Direttiva Compatibilit Elettromagnetica 89 336 CEE e le loro successive modifiche e integrazioni manufactured by TECNO GAZ S p A complies with the law provisions that transpose the Low Voltage Directive EC 73 23 the Electromagnetic Compatibility Directive EC 89 336 and following amendments and supplements Nome Paolo Bertozzi Posizione Presidente 2 DWAF043 doc v TECNO GAZ PAR 2 GARANZIA WARRANTY Il prodotto coperto da garanzia per un periodo di dodici mesi La garanzia ha inizio dalla data di consegna della macchina al cliente comprovata dalla restituzione del tagliando di garanzia allegata a

Download Pdf Manuals

image

Related Search

Related Contents

Husky HDN21901 User's Manual      BitFenix Aegis  Barco MDNG-6121  定型様式7 提出書類内容チェックリスト  TITLES: CMC Gum Powder  LA400 & LA400-S  Lego Legends of Chima CHI Mungus  PROFITEST PVSUN et PVSUN MEMO Appareils de contrôle pour  

Copyright © All rights reserved.
Failed to retrieve file