チューブストリッパカッタ取扱説明書
Contents
1. 2 3 1 2 3 4 52. 6 7 oa HIR0074 00 eler struction Manual for An CO Peeled cover discharge Tube insertion guide hole spout Anti spatter tube Tube cover peeler Before cutting the cover make sure that the cutting plane of the tube is right angled To cut the cover rotate either Anti spatter tube or Tube cover peeler whichever easier to turn gt Insert the tube straight into the guide hole Insert the Anti spatter tube further with rotating the tube or the Anti spatter tube cover peeler clockwise until the tubing edge touches the end of the peeler GSD Push the Anti spatter tube harder until the tubing edge touches the end of the peeler kKeep rotating an Anti spatter tube or the cover peeler until the peeled cover gets stripped completely and
3. PISCO Point 71 Fim ORE BIS Point A ers 1
4. be cover peeler d Safety Instruction
5. then take out the tube from the Anti spatter tube cover peeler Rotate it with the tubing edge touching the end of the peeler Det Warnings 1 A blade is equipped inside Please stop using this product immediately when a crack a fracture or a chipping is found on the resin part to prevent an injury 2 Do not disassemble or remodel the product It may damage the product itself and cause an injury 3 Avoid putting load on the product such as pulling twisting or bending It may damage the product itself and cause an injury Cautions 1 This peeler is designated for PISCO Anti spatter tube flame retardant tube Do not use it for any purpose other than peeling the cover of PISCO Anti spatter tube 2 When using for an excessively bent or a crushed tube the product may not be able to deliver sufficient performance 3 If the peeler is used with the cover discharge spout blocked the stripped cover may get clogged inside the peeler 4 lf the peeled cover or scraps are jammed in the product remove the stuffing by inserting a tool from the side window Peeled cover discharge spout before continuously cut the cover again 5 When failed to cut the cover properly cut out the failed portion including the inner tube and try again from the beginning 6 If fine scraps are generated on the surface of the tube remove it not to get mixed into the plumbing 7 Diligently remove the scraps which remained inside the Anti spatter tu
Download Pdf Manuals
Related Search