Samsung 31.5" Curved monitor with incredible picture quality User Manual
Contents
1. Issues Solutions There is no sound Check the connection of the audio cable or adjust the volume Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software Program Video is available but there is no sound Sound cannot be heard if a HDMI DVI cable is used to connect the input device Connect the device using an HDMI cable or a DP cable Issues Solutions A beeping sound is heard when my PC is booting If a beeping sound is heard when your PC is booting have your PC serviced The LED lights on the frame of the product may be seen depending on the user s viewing angle The light is harmless to people and has no bearing on product features and performance The product is safe to use Refer to the user manual for your PC or graphics card for further instructions on adjustment Q amp A Question How can I change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel Appearance and Themes Display Settings gt Advanced Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel Display Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel Appearance and Personalization Personalization Display2. imo Wikevalnmele User Manual S32E590C The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Table of contents Before Using the Product Copyright 4 Securing the Installation Space 5 Precautions for storage 5 Safety Precautions 5 Symbols 5 Cleaning 6 Electricity and Safety 6 Installation 7 Operation 9 Correct posture to use the product 12 Preparations Checking the Components 13 Components 13 Parts 14 Control Panel 14 Direct Key guide 15 Function Key Guide 16 Reverse Side 18 Installation 19 Attaching the Stand 19 Removing the Stand 20 Adjusting the Product Tilt 21 Anti theft Lock 22 Installing the Wall Mount 23 Wall Mount Kit Specifications VESA 24 Connecting and Using a Source Device Before Connecting 25 Pre connection Checkpoints 25 Connecting and Using a PC 25 Connection Using the HDMI Cable 25 Connection Using an HDMI DVI Cable 26 Connection Using the DP Cable 26 Connecting to Headphones or Speakers 27 Connecting the Power 27 Driver Installation 28 Setting Optimum Resolution 28 Screen Setup SAMSUNG MAGIC Bright 29 Configuring SAMSUNG MAGIC Bright 29 Brightness 31 Configuring Brightness 31 Contrast 32 Configuring Contrast 32 Sharpness 33 Configuring Sharpness 33 Color 34 Configuring Color 34 HDMI Black Le
3. avai avai avai avai avai avai avai 1 Move the JOG bu 2 Move the JOG bu ab ab ab ab ab ab ab ew ew ew ew ew ew ew ne ne SAMSUNG n MacicBright is set to Dynamic Contrast mode n Eco Saving Plus is enabled n Eye Saver Mode is enabled n MAGicBright is in Cinema or Dynamic Contrast mode n Game Mode is enabled SAMSUNG n Macicbright is in Cinema or Dynamic Contrast mode n Game Mode is enabled on UP DOWN to select Brightness Contrast or Sharpness on LEFT RIGHT to adjust the Brightness Contrast or Sharpness setting CY LAY Configuring Volume in the Initial Screen Adjust the Volume by moving the JOG button when the Direct Key Guide is displayed on the screen Volume The displayed image may differ depending on the model 1 Adjust the Volume controlling the JOG button LEFT RIGHT Ifthe audio quality of a connected input device is poor the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers Set the input volume for the input device to at least 20 and control the volume using the volume control JOG button LEFT RIG What is Auto Mute The function mutes the audio to improve sound effect when there usually due to a problem with the volume of an input device To activate the Mute function access the Volume control screen the
4. 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play This monitor can be installed and used with any Plug and Play compatible systems Two way data exchange between the monitor and PC system optimizes the monitor settings Monitor installation takes place automatically However you can customize the installation settings if desired Panel Dots Pixels Due to the nature of the manufacturing of this product approximately 1 pixel per million 1 ppm may be brighter or darker on the LCD panel This does not affect product performance The above specifications are subject to change without notice to improve quality This device is a Class B digital apparatus USA only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 68 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode only functions when the product is connected to a PC with a power saving function PowerSaver Power Consumption Power saving mode Power off Power
5. D The selected option will be applied Chapter 06 Setup and Reset A detailed description of each function is provided Refer to your product for details System i Eco Saving Plus Off Timer PC AV Mode DisplayPort Ver Source Detection Auto Key Repeat Time Acceleration Sound Sound Mode Standard Select Sound Stereo The displayed image may differ depending on the model Configuring Volume 1 mn BP WwW N When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Adjust the Volume controlling the JOG button LEFT RIGHT The selected option will be applied 45 Configuring Sound Mode Applicable when speakers are connected Volume Sound Mode Standard Select Sound Music Movie Clear Voice The displayed image may differ depending on the model When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Sound controlling the JOG button UP DOWN and press the JOG button Move to Sound Mode controlling the JOG button UP DOWN and press the JOG button Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the bes
6. Hold the lower part of the product and adjust the tilt carefully Anti theft Lock An anti theft lock allows you to use the product securely even in public places The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality SAMSUNG a Ww N Fix the cable of your anti theft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end nsert the locking device into the anti theft lock slot at the back of the product Lock the locking device An anti theft locking device can be purchased separately Refer to the user guide provided with your anti theft locking device for details Anti theft locking devices can be purchased at electronics retailers or online aa Installing the Wall Mount The wall mount kit allows you to mount the product on the wall Purchase a compatible wall mount kit to use with the product For detailed information on installing the wall mount see the instructions provided with the wall mount We recommend you contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or
7. Do not install your Wall Mount Kit while your product is turned on It may result in personal injury due to electric shock a HOLDER SCREW 4EA Optional Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices Pre connection Checkpoints Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to device Do not connect the power cable until all connections are completed Connecting the power cable during connection may damage the product Check the types of ports at the back of the product you want to connect Connecting and Using a PC Select a connection method suitable for your PC Connecting parts may differ in different products Connection Using the HDMI Cable Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable HDMI IN 1 HDMI IN 2 O gt 1 Connect the HDMI IN 1 or HDMI IN 2 port on the back of the product to the HDMI port on the PC using an HDMI cable 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Change the input source to or controlling the JOG button UP DOWN when input sour
8. This option is not available when WaAeicBri is in Ci or t t t lable when MaGicBright Cinema Dynamic Contrast mode This menu is not available when Game Mode is enabled Adjust the SAMSUNG p sharpness of the MAGICBright picture Values Brightness closer to 100 mean a sharper image Contrast j g Sharpness Eo Eye Saver Mode Return The displayed image may differ depending on the model Configuring Sharpness 1 mn A WwW N When the Function Key Guide appears select OI by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Sharpness controlling the JOG button UP DOWN and press the JOG button Adjust the Sharpness controlling the JOG button LEFT RIGHT The selected option will be applied Color A detailed description of each function is provided Refer to your product for details Adjust the tint of the screen This menu is not available when aGicBright is set to Cinema or Dynamic Contrast mode This menu is not available when Game Mode is enabled This menu is not available when Eye Saver Mode is enabled Configure color settings MAG ICBright Custom Brightness 100 Contrast 75 Sharpness 60 Color gt Eye Saver Mode Adjust the red saturation level Red Values closer to 100 mean greater intensity for the Blue color Green Color Tone Gamma The displa
9. of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Be sure to consult Samsung Customer Service Center if you want to install the product at such a place oN LAY There is a high voltage inside the product Never disassemble repair or modify the product yourself e A fire or electric shock may result Contact Samsung Customer Service Center for repairs To move the product first disconnect all the cables from it including the power cable Damage to the cord may result in a fire or electric shock If the product generates abnormal sounds a burning smell or smoke disconnect the power cord immediately and contact Samsung Customer Service Center e An electric shock or fire may result Do not let children hang from the product or climb on top of it Children may become injured or seriously harmed If the product is dropped or the outer case is damaged turn off the power switch and disconnect the power cord Then contact Samsung Customer Service Center Continued use can result in a fire or electric shock Do not leave heavy objects or items that children like toys sweets etc on top of the product e The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury Dur
10. JOG button You can activate Source Detection 2 Move to System controlling the JOG button UP DOWN and press the JOG button Decide how input sources will be 3 detected Sound Move to Source Detection controlling the JOG button UP DOWN and press the JOG button Eco Saving Plus e Auto The input source is automatically recognized Off Timer e Manual Manually select an input source PC AV Mode DisplayPort Ver 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button Auto Source Detection Manual 5 The selected option will be applied Key Repeat Time The displayed image may differ depending on the model Key Repeat Time Control the response rate of a button when the button is pressed Configure the response rate of a button when the Eco Saving Plus button is pressed Sound Off Timer PC AV Mode Acceleration DisplayPort Ver 1S8 2 sec Source Detection No Repeat Key Repeat Time eae Return The displayed image may differ depending on the model Configuring Key Repeat Time 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button 2 Move to System controlling the JOG button UP DOWN and press the JOG button 3 Move to Key Repeat Time controlling the JOG button UP DOWN and press the JOG button Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only onc
11. Mode is enabled Adjust the power consumption of the product to save Eco Saving Plus energy Sound Off Timer PC AV Mode DisplayPort Ver Source Detection Key Repeat Time Stand by The displayed image may differ depending on the model Configuring Eco Saving Plus 1 2 When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Eco Saving Plus controlling the JOG button UP DOWN and press the JOG button Off Deactivate the Eco Saving Plus function Auto The power consumption will automatically be reduced by about 10 over the current setting The reduction of power consumption depends on the customer screen brightness condition Low The power consumption will be reduced by 25 over the default setting High The power consumption will be reduced by 50 over the default setting Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied Off Timer Configuring Off Timer 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button You can set the product to automatically turn off 2 Move to System controlling the JOG button UP DOWN and press the JOG button Enable or disable the Off Timer 3 Sound Move to Off Timer controlling the JOG button UP DOWN and p
12. Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings How can I change the resolution Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display Settings and adjust the resolution Windows Vista Go to Control Panel Appearance and Personalization Personalize gt Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Windows 8 Windows 8 1 Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution Question How do I set power saving mode Answer Windows XP Set power saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on
13. in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU System and set Off Timer to Off PC AV Mode Supplied for the wide models only such as 16 9 or 16 10 Ifthe monitor is in HDMI 1 HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates press the JOG button to display the function button screen and then select the HL icon You can select PC or AV Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie Configuring PC AV Mode Set to AV to enlarge 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button Sound the picture Move to System controlling the JOG button UP DOWN and press the JOG button Eco Saving Plus Off Timer PC AV Mode Move to PC AV Mode controlling the JOG button UP DOWN and press the JOG button DisplayPort Ver KR W N Move to the HDMI 1 HDMI 2 DisplayPort controlling the JOG button UP DOWN and press the JOG button Source Detection Acceleration Set to PC when connected to a PC Key Repeat Time Auto Set to AV when connected to an AV device D Move to the desired option controlling the JOG button UP DOWN and press the JOG button atete 6 The selected option will be applied DisplayPort AV
14. injury to yourself or others if you elect to install the wall mount on your own Wall Mou nt Kit Specifications VESA For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Install your wall mount on a solid wall perpendicular to the floor Before Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury attaching the wall mount to surfaces other than plaster board please contact your nearest dealer for additional information If you install the product on a slanted wall it may fall and result in severe personal injury Samsung wall mount kits contain a detailed installation manual and all parts necessary for Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions assembly are provided Donot mount the product at more than a 15 degree tilt A Always have two people mount the product on a wall oe Standard dimensions for wall mount kits are shown in the table below Unit mm inches T Model name VESA screw hole Standard Screw Quantity B specs A B in millimeters SAMSUNG S32E590C 200 x 200 7 9 x 7 9 M4 4
15. mode for the DisplayPort source HDMI 1 HDMI 2 lt Return The displayed image may differ depending on the model DisplayPort Ver Select your Displayport Displayport 1 1 supports High Bit Rate 1 while 1 2 supports High Bit Rate 2 Select your Displayport Displayport 1 1 Eco Saving Plus supports HBR 1 while 1 2 supports HBR 2 Sound Off Timer PC AV Mode DisplayPort Ver Source Detection Key Repeat Time The displayed image may differ depending on the model Incorrect settings may cause the screen to go blank If this occurs check the device specifications If the monitor is in HDMI 1 HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates press the JOG button to display the function button screen and then select the ON icon You can select 1 1 or 1 2 Configuring DisplayPort Ver 1 When the Function Key Guide appears select HI by moving the JOG button UP Next press the JOG button 2 Move to System controlling the JOG button UP DOWN and press the JOG button 3 Move to DisplayPort Ver controlling the JOG button UP DOWN and press the JOG button x MA2 4 Mowe to the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Source Detection Configuring Source Detection 1 When the Function Key Guide appears select IM by moving the JOG button UP Next press the
16. of VESA 1280 x 1024 63 981 60 020 08 000 ee ee VESA 1280 x 1024 79 976 75 025 35 000 natural pictures The repeat frequency is called vertical frequency or refresh rate VESA 1440 x 900 55 935 59 887 06 500 and is indicated in Hz VESA 1600 x 900 RB 60 000 60 000 08 000 VESA 1680 x 1050 65 290 59 954 46 250 VESA 1920 x 1080 67 500 60 000 48 500 Chapter 11 Appendix Responsibility for the Pay Service A Product damage caused by customer s fault Cost to Cu stomers Product damage caused by customer s mishandling or wrong repair If a product damage is caused by 2s _ 7 e External impact or drop When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Use of supplies or separatly sold product unspecified by Samsung epair from a person besides an engineer of outsourcing service company or partner of Samsung ectronics Co Ltd m 3 Not a product defect e Remodeling or repairing the product by customer Cleaning of the product Adjustment Explanation Re installation and etc Using it with incorrect voltage or non authorised electrical connections e a service technician gives instructions on how to use product or simply adjusts options without ot following the cautions in User Manual disassembling product a defect is caused by external environmental facto
17. or when a game console such as PlayStation or Xbox is connected This menu is not available when Eye Saver Mode is enabled Optimizes image settings for playing games Game Mode off Response Time On Picture Size Always On lt Return The displayed image may differ depending on the model Configuring Game Mode 1 mn A WwW N When the Function Key Guide appears select OI by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Game Mode controlling the JOG button UP DOWN and press the JOG button Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied When the monitor turns off enters power saving mode or changes input sources Game Mode turns Off even if it is set to On Ifyou want to keep Game Mode enabled all the time select Always On Response Time Configuring the Response Time 1 When the Function Key Guide appears select IM by moving the JOG button UP Next press the JOG button Accelerate the panel response rate to make video appear more vivid and natural It is best to set Response Time to Standard or Faster when you are not 2 Move to Picture controlling the JOG button UP DOWN and press the JOG button viewing a movie 3 Move to Response Time controlling the JOG button UP DOWN and press the JOG button Accelerat
18. screen e Adjust the angle so light does not reflect on the screen Keep your forearms perpendicular to your upper arms and level with the back of your hands Keep your elbows at about a right angle Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Chapter 02 Preparations Checking the Components Contact the vendor where you Components purchased the product if any components are missing The appearance of the components may differ frorn the images shown The optimal resolution may not be A available when using a non high speed HDMI or HDMI DVI cable Quick Setup Guide DC power adapter Detachable P27 HOLDER SCREW 4EA Optional Components may vary depending on the country Warranty card Not available in some locations HDMI cable Optional P25 Regulatory guide Power cable P 27 Stand base Stand neck Parts Control Panel The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality JOG Button Function Key Guide SAMSUNG LEFT RIGHT PRESS ENTER DOWN Icons Description Multi directional button that helps navigate JOG Button The JOG button is located on the rear left side of the product The button can be used to move up do
19. screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V kHz IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152x870 68 681 75 062 100 000 VESA 640 x 480 31469 59 940 25 175 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 J Resolution Horizontal Frequency Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V kHz Horizontal Frequency VESA 1024 x 768 56 476 70 069 75 000 The time required to scan a single line VESA 1024 x 768 60 023 75 029 78750 from the left to the right side of the screen is called a horizontal cycle The VESA 1152 x 864 67 500 75 000 108 000 J reciprocal number of a horizontal cycle is called horizontal frequency Horizontal VESA 1280 x 720 45 000 60 000 74 250 frequency is measured in kHz VESA 1280 x 800 49 702 59 810 83 500 F Vertical Frequency Repeating the same picture dozens
20. the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel Appearance and Personalization gt Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 8 Windows 8 1 Set power saving mode in Settings Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Chapter 10 Specifications ji General Model Name Panel Size 32 Class 31 5 Inches 80 cm Display area 698 40 mm H x 392 85 mm V Display area 27 5 Inches H x 15 5 Inches V H Pixel Pitch 0 36375 mm H x 0 36375 mm V 0 014321 Inches H x 0 014321 Inches V V Dimensions W x H x D Without Stand 729 1 x 425 1 x 90 6 mm 6 0 kg Weight 28 7 x 16 7 x 3 6 Inches 13 2 Ibs With Stand 729 1 x 523 9 x 214 3 mm 6 9 kg Dimensions Wx H x D 28 7 x 20 6 x 8 4 Inches 15 2 Ibs A Maximum Pixel Clock 148 5 MHz HDMI DisplayPort E Power Supply AC 100 240 V 10 50 60 Hz 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Model Name 32E590C Signal connectors HDMI DP Port Environmental conditions Operating Temperature 50 F 104 F 10 C 40 C Humidity 10
21. the display edapter on which you want to intall fe monitor Select the monitor which you want to install Samsung 4 Goto Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting Setup Guide Language English The optimal resolution for this monitor is as follows HKKK KKH x haz Follow the above settings to set the resolution Current Resolution EREE Xen 1 Select a language by moving the JOG button LEFT RIGHT Next press the JOG button 2 Tohide the information message press the JOG button If the optimum resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again The optimum resolution can also be selected in Control Panel on your PC Cy AJ Chapter 04 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details This menu provides an optimum picture quality suitable for the environment where the product will be used You can customize the brightness to suit your preferen
22. MB of memory e At least 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select Easy Setting Box from the Program list and click the Add Delete button Chapter 09 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Testing the Product Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Power on the product 4 ifthe message Check Signal Cable appears the product is working normally If the screen remains blank check the PC system video controller and cable Checking the Resolution and Frequency For amode that exceeds the supported resolution refer to Standard Signal Mode Table the message Not Optimum Mode will appear for a short time The displayed resolution may vary depending on the product or PC system settings Check the following Installation issue PC mode Issues The screen keeps switching on and off Check t Solutions he cable connection between th
23. Mere The function may not be supported depending on the ports provided with the product Picture Size 43 Changing the screen size is available when the following conditions are satisfied 16 9 A digital output device is connected using the HDMI cable Screen Fit A digital output device is connected using the DP cable The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals This can only be set when the external input is connected through HDMI DP and PC AV Mode is set to AV 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button The displayed image may differ depending on the model D Theselected option will be applied Screen Adjustment This menu is only available when Picture Size is set to Screen Fit in AV Mode When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels Move the image displayed on the screen to the left or V Position right H Position Move the image displayed on the screen up or down H Position V Position The displayed image may differ depending on the model Configuring H Position amp V Position H Position Move the screen to the left or right V Position Move the screen up or down 1 num A W N When the Fun
24. PC AV Mode is set to AV MacicBright has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can select Custom which automatically recalls your personalized picture settings Dynamic Select this mode to view a sharper image than in Standard mode e Standard Selec e Movie Select th this mode when the surroundings are bright This also provides a sharp image is mode when the surroundings are dark This will save power and reduce eye fatigue Custom Select this mode when you want to adjust the image according to your preferences 4 Move to the des D The selected op ired option controlling the JOG button UP DOWN and press the JOG button ion will be applied Brightness Configuring Brightness 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button You can adjust the general brightness of the picture Range 0 100 A higher value will make the picture appear brighter Move to Picture controlling the JOG button UP DOWN and press the JOG button This menu is not available when MagGicBright is set to Dynamic Contrast mode Move to Brightness controlling the JOG button UP DOWN and press the JOG button This menu is not available when Eco Saving Plus is set This menu is not available when Eye Saver Mode is enabled Adjust the Brightne
25. and represents how many times horizontal ines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Vertical Frequency___ One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizontal resolution and 1080 vertical lines vertical resolution Plug amp Play___ sThe Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play
26. and press the JOG button Move to the desired option controlling the JOG button LEFT RIGHT and press the JOG button mn A WwW N The selected option will be applied Allthe menu settings will be reset to default Are you sure you want to reset The displayed image may differ depending on the model Chapter 07 Information Menu and Others A detailed description of each function is provided Refer to your product for details Displaying Information 1 When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button View the current input source frequency and resolution 2 Move to Information controlling the JOG button UP DOWN and press the JOG button The current input source Information frequency and resolution will appear 1 Picture LS32E590CS XF S N gt OnScreen Display DisplayPort HK y XXX X kHz Hz PP The displayed image may differ depending on the model a7 Configuring Brightness Contrast and Sharpness from the Initial Screen You can adjust Brightness Contrast or Sharpness by moving the JOG button up or down if no OSD menu is displayed Bri ess lt gt The displayed image may differ depending on the model Brightness This me This menu This me Contrast This me This me Sharpness This me This menu is NO is NO iS NO iS NO iS NO iS NO is NO
27. ble or vibrating surface insecure shelf sloped surface etc e The product may fall and become damaged and or cause an injury Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e A fire or electric shock may result Do not expose the product to direct sunlight heat or a hot object such as a stove The product lifespan may be reduced or a fire may result Do not install the product within the reach of young children The product may fall and injure children Edible oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Do not drop the product while moving e Product failure or personal injury may result Do not set down the product on its front The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e The product may fall and become damaged and or cause an injury e Install the product only on cabinets or shelves of the right size Set down the product gently e Product failure or personal injury may result Installing the product in an unusual place a place exposed to a lot of fine dust chemical substances extreme temperatures or a significant presence
28. button Energy Star Test Condition Power Indicator Off Blinking On Power Consumption 34W Less than 0 3 W Less than 0 3 W The displayed power consumption level can vary in different operating conditions or when settings are changed ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard SOG Sync On Green is not supported To reduce the power consumption to 0 disconnect the power cord Disconnect the power cable if you will not be using the product for an extended period of time during vacation etc LD A O Standard Signal Mode Table Model Name 32E590C This product can be set to only one resolution for each screen size to obtain Synchronization Horizontal Frequency 30 81 kHz the optimum picture quality due to the nature of the panel Using a resolution Vertical Frequency 56 75 Hz HDMI other than the specified resolution may aa ne ene Aaaa Resolution Optimum resolution 1920 x 1080 60 Hz this it is recommended that you select the optimum resolution specified for Maximum resolution 1920 x 1080 60 Hz your product If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the
29. ce is not set Provided ports may vary depending on the product Connection Using an HDMI DVI Cable Connection Using the DP Cable Do not connect the power cable before connecting all other cables Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable Ensure you connect a source device first before connecting the power cable A DP cable shorter under 1 5m in length is recommended Using a cable longer than 1 5m can affect the picture quality SAMSUNG 6 o tS HDMI IN 1 HDMI IN 2 I DP IN E o R 1 Connect the HDMI DVI cable to the HDMI IN 1 or HDMI IN 2 port on the back of the product and m the DVI port on the PC 1 Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Change the input source to HDMI 1 or HDMI 2 controlling the JOG button UP DOWN when input source is not set 3 Change the input source to DisplayPort controlling the JOG button UP DOWN when input source is not set Provided ports may vary depending on the product The a
30. ces This menu is not available when Eco Saving Plus is enabled This menu is not available when Game Mode is enabled This menu is not available when Eye Saver Mode is enabled In PC mode Picture Set to an optimum SAMSUNG p picture quality MAGICBright suso suitable for Brightness Standard the working environment Contrast Cinema Sharpness Dynamic Contrast Eoo Eye Saver Mode lt Return The displayed image may differ depending on the model Configuring SAMSUNG MAGIC Bright 1 2 When the Function Key Guide appears select II by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to m amp icBright controlling the JOG button UP DOWN and press the JOG button Custom Customize the contrast and brightness as required Standard Obtain a picture quality suitable for editing documents or using Internet Cinema Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment eo In AV mode MAG ICBright Dynamic Brightness Standard Contrast Movie Sharpness Custom Eo Eye Saver Mode The displayed image may differ depending on the model Set to an optimum picture quality suitable for the working environment Return When the external input is connected through HDMI DP and
31. ction Key Guide appears select I by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Screen Adjustment controlling the JOG button UP DOWN and press the JOG button Move to the H Position or V Position controlling the JOG button UP DOWN and press the JOG button Adjust the H Position or V Position controlling the JOG button LEFT RIGHT and press the JOG button The selected option will be applied Chapter 05 Coordinating OSD A detailed description of each function is provided Refer to your product for details OnScreen Display Configure the transparency of the pags menu windows Language Display Time lt Return The displayed image may differ depending on the model Changing Transparency 1 When the Function Key Guide appears select IJ by moving the JOG button UP Next press the JOG button 2 Move to OnScreen Display controlling the JOG button UP DOWN and press the JOG button 3 gt Move to Transparency controlling the JOG button UP DOWN and press the JOG button Off On 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button 5D The selected option will be applied 4 Language Configuring Language 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button Set the menu language A change to the language sett
32. differ depending on the product t 10 cm 3 93 Inches 10 cm 3 93 Inches 10 cm 10 cm 3 93 Inches 3 93 Inches It is dangerous to make any kind of contact with any internal part of this product A see eee eee ee eee ee 1 10cm 1 3 93 Inches This symbol alerts you that important literature concerning operation and maintenance has been lt lt included with this product Symbols Precautions for storage y High glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used Warning nearby A serious or fatal injury may result if instructions are not followed Personal injury or damage to properties may result if instructions are not followed O Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product Service fee will be charged UI Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning The following images are for reference only Real life situations may differ from what is shown in the images 1 Power off the product and computer 2 Disconnect the power cord from the product Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock
33. e displayed image may differ depending on the model Eye Saver Mode Configuring Eye Saver Mode 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button Set to an optimum picture quality suitable for eye relaxation T V Rheinland Low Blue Light Content is a certification for products which meet requirements for lower blue light levels When Eye Saver Mode is On the blue light that wavelength is around 400nm will become lower and lower and one hour later it will approach the optimum picture quality suitable for eye relaxation At the same time the blue light level is lower than in the default settings and it was tested by TUV Rheinland and certified as it met the requirements of TUV Rheinland Low Blue Light Content standards Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Eye Saver Mode controlling the JOG button UP DOWN and press the JOG button Move to the desired option controlling the JOG button UP DOWN and press the JOG button mn A W N The selected option will be applied Set to an optimum SAMSUNG picture quality suitable for eye Brightness 100 relaxation MAGICBright Custom Contrast 75 Sharpness 0 Color Eye Saver Mode The displayed image may differ depending on the model Game Mode Configure the product screen settings for game mode Use this feature when playing games on a PC
34. e product and PC and ensure the connectors are locked Blank spaces are found on all four sides of the screen when an HDMI or HDMI DVI cable is connected to the product and PC The blank spaces found on the screen have nothing to do with the product Blank spaces on the screen are caused by the PC or graphics card To resolve the problem adjust the screen size in the HDMI or DVI settings for the graphics card If the graphics card settings menu does not have an option to adjust the screen size update the graphic s card driver to the latest version Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings Issues The power LED is off The screen will not switch on Check t Solutions hat the power cable is connected properly The message Check Signal Cable appears Check t hat the cable is properly connected to the product Check t hat the device connected to the product is powered on Not Optimum Mode is displayed This message appears when the signal from the graphics card exceeds the maximum resolution or frequen cy for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table P70 The images on the screen look distorted Check t he cable connection to the product Issues The screen is not clear The screen is blurry So
35. e the panel response Standard Faster Fastest rate to make video Response Time Standard appear more vivid 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button and natural Game Mode Picture Size Faster Fastest 5 The selected option will be applied The displayed image may differ depending on the model Picture Size Change the picture size In PC mode Choose the size and aspect ratio of the picture displayed Response Time on screen Game Mode Picture Size The displayed image may differ depending on the model Changing the Picture Size 1 2 3 When the Function Key Guide appears select OI by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Picture Size controlling the JOG button UP DOWN and press the JOG button In PC mode Auto Display the picture according to the aspect ratio of the input source Wide Display the picture in full screen regardless of the aspect ratio of the input source In AV mode In AV mode 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts Choose the size and 16 9 Display the picture with an aspect ratio of 16 9 aspect ratio of the ee i o PE p Game Mode picture displayed Screen Fit Display the picture with the original aspect ratio without cutting off Response Time
36. e when a button is pressed 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button 5 The selected option will be applied Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product Set the status of the Power LED On Working power LED Reset All Stand by The displayed image may differ depending on the model Configuring Power LED On 1 When the Function Key Guide appears select IM by moving the JOG button UP Next press the JOG button 2 Move to System controlling the JOG button UP DOWN and press the JOG button 3 Move to Power LED On controlling the JOG button UP DOWN and press the JOG button Working The power LED is on when the product is turned on Stand by The power LED is on when the product is turned off 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button D The selected option will be applied Reset All Initializing Settings Reset All 1 When the Function Key Guide appears select HIM by moving the JOG button UP Next press the JOG button Return all the settings for the product to the default factory settings Move to System controlling the JOG button UP DOWN and press the JOG button Return all the Power LED On Stand by settings for the product to the Reset All default factory settings Move to Reset All controlling the JOG button UP DOWN
37. electric shock may result Clean any dust around the pins of the power plug or the power socket with a dry cloth A fire may result Do not disconnect the power cord while the product is being used The product may become damaged by an electric shock Only use the power cord provided with your product by Samsung Do not use the power cord with other products e A fire or electric shock may result Keep the power socket where the power cord is connected unobstructed The power cord must be disconnected to cut off power to the product when an issue occurs Hold the plug when disconnecting the power cord from the power socket e An electric shock or fire may result DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES A fire may result Do not install the product in poorly ventilated spaces such as a bookcase or closet e An increased internal temperature may cause a fire Install the product at least 10 cm away from the wall to allow ventilation An increased internal temperature may cause a fire Keep the plastic packaging out of the reach of children Children may suffocate Do not install the product on an unsta
38. ing a lightning or thunderstorm power off the product and remove the power cable A fire or electric shock may result Do not drop objects on the product or apply impact e A fire or electric shock may result Do not move the product by pulling the power cord or any cable e Product failure an electric shock or fire may result from a damaged cable If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately Sparks can cause an explosion or fire Do not lift or move the product by pulling the power cord or any cable Product failure an electric shock or fire may result from a damaged cable Do not use or keep combustible spray or an inflammable substance near the product An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e An increased internal temperature may cause a fire Do not insert metallic objects chopsticks coins hairpins etc or objects that burn easily paper matches etc into the product via the vent or input output ports etc Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Center e Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objec
39. ing will only be applied to the onscreen menu display Move to OnScreen Display controlling the JOG button UP DOWN and press the JOG button It will not be applied to other functions on your PC Move to Language controlling the JOG button UP DOWN and press the JOG button Seas Move to the desired option controlling the JOG button UP DOWN and press the JOG button language Transparency Deutsch mn A WwW N The selected option will be applied Language English Display Time Espa ol BEWEIS Italiano The displayed image may differ depending on the model Display Time Set the on screen display OSD menu to automatically disappear if the menu is not used for a specified period of time Display Time can be used to specify the time after which you want the OSD menu to disappear Set how long the menu window will remain on screen Language for when it is not in 5 sec use Transparency Display Time 10 sec 20 sec 200 sec The displayed image may differ depending on the model Configuring Display Time 1 When the Function Key Guide appears select LL to display the corresponding menu screen 2 Move to OnScreen Display controlling the JOG button UP DOWN and press the JOG button 3 Move to Display Time controlling the JOG button UP DOWN and press the JOG button e 5sec 10sec 20 sec 200 sec 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button
40. lack Level Settings 1 When the Function Key Guide appears select IM by moving the JOG button UP Next press the JOG button If a DVD player or set top box is connected to the product via HDMI image quality degradation contrast color degradation black level etc may occur depending 2 on the connected source device In such case HDMI Black Level can be used to adjust the image quality If this is the case correct the degraded picture quality using HDMI Black Level 3 Move to HDMI Black Level controlling the JOG button UP DOWN and press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button This function is only available in HDMI 1 or HDMI 2 mode i Normal Select this mode when there is no contrast ratio degradation e Low Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation Optimize HDMI F SAMSUNG p picture brightness 4 Move to the desired option controlling the JOG button UP DOWN and press the JOG button MAGICBright Custom and contrast by E Brightness 100 adjusting the black Sa level of the video D The selected option will be applied Contrast 75 signal w Sharpness 60 HDMI Black Level may not be compatible with some source devices i Color HDMI Black Level Sa The HDMI Black Level feature is only activated at a certain AV resolution such as 720P and 1080P Low Eye Saver Mode Th
41. lutions Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode There are shadows or ghost images left on the screen Table P 70 in this manual and the Information menu on the product The screen is too bright The screen is too dark Adjust Brightness and Contrast Screen color is inconsistent Change the Color se tings The colors on the screen have a shadow and are distorted Change the Color se tings White does not really look white Change the Color se tings There is no image on the screen and the power LED blinks every 0 5 to 1 second The product is opera ing in power saving mode Press any key on the eyboard or move the mouse to return to normal operating mode Text is blurry If using a Windows OS e g Windows 7 Windows 8 or Windows 8 1 Go to Control Panel Fonts gt Adjust ClearType text and change Turn on ClearType Video playback is choppy Playback of high definition large video files can be choppy This may be because the video player is not optimized for the computer resource Try playing the file on another video player
42. may result 3 Wipe the monitor with a clean soft and dry cloth Donot apply a cleaning agent that contains alcohol were solvent or surfactant to the monitor re i Do not spray water or detergent directly on the product 4 Weta soft and dry cloth in water and wring thoroughly to clean the exterior of the product 5 Connect the power cord to the product when cleaning is finished 6 Poweron the product and computer Electricity and Safety The following images are for reference only Real life situations may differ from what is shown in the images Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not use multiple products with a single power socket Overheated power sockets may cause a fire Do not touch the power plug with wet hands Otherwise an electric shock may result Insert the power plug all the way in so it is not loose An unsecure connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result O Do not bend or pull the power cord with force Be careful not to leave the power cord under a heavy object Damage to the cord may result in a fire or electric shock Do not place the power cord or product near heat sources A fire or
43. n key guide screen The OSD On Screen Display of your Monitor s feature appears OSD control lock Maintain the current settings or lock the OSD control to prevent unintended changes to settings Enable Disable To lock unlock the OSD control press the LEFT button for 10 seconds when the main menu displayed If the OSD control is locked Brightness and Contrast can be adjusted Eye Saver Mode is available System Power LED On is available Information can be viewed Return Selects C by moving the JOG button in the function key guide screen Press to enable or disable Eye Saver Mode The items below are not available if the Eye Saver Mode function is enable Picture Game Mode AG cBright Brightness Color System Eco Saving Plus Selects 0 to turn the Monitor off by moving the JOG button in the function key guide screen Actual models because of functional variation Function key guide options will be different Please run the corresponding function based on the actual icon and description When the monitor displays nothing i e Power saving mode or Non signal mode 2 direct keys for control source and power could be used as below JOG Button Power saving Non signal mode UP Source Change Down PRESS ENTER for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below JOG Button Action UP DOWN Move the option Exit
44. n u To deactivate the Mute function access the Volume control screen the The Mute function is disabled if you activate power saving mode or turn HT on the product is sound noise or when the input signal is weak se the JOG button to move the focus down n increase or decrease the Volume the product off and then on again ag Chapter 08 Installing the Software Easy Setting Box Ei Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections Installing the Software 1 Toinstall the latest version of Easy Setting Box download it from the Samsung Electronics website at http www samsung com 2 Select the Easy Setting Box setup Program 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installation The software may not work properly if you do not restart the computer after the installation The Easy Setting Box icon may not appear depending on the computer system and the product specifications f the shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation Easy Setting Box The Easy Setting Box installation may be affected by the Graphics Card Motherboard and the Networking Environment System Requirements Os Windows Vista 32Bit 64Bit Windows 7 32Bit 64Bit Windows 8 32Bit 64Bit Windows 8 1 32Bit 64Bit Hardware e At least 32
45. on and Frequency 61 Check the following 62 Q amp A 65 Specifications General 67 PowerSaver 69 Standard Signal Mode Table 70 Appendix Responsibility for the Pay Service Cost to Customers 72 Not a product defect 72 A Product damage caused by customer s fault 72 Others 72 Terminology 73 Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association Ownership of all other trademarks is attributed to their due owner Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing Caution the product RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL AN This symbol indicates that high voltage is present inside The exterior may
46. paratus Otherwise a fire may result Keep the DC power adapter in a well ventilated area Do not hold the product upside down or move it by holding the stand The product may fall and become damaged or cause an injury Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not use humidifiers or stoves around the product A fire or electric shock may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot Store small accessories out of the reach of children Exercise caution when adjusting the product angle or stand height Your hand or finger may get stuck and injured e Tilting the product at an excessive angle may cause the product to fall and an injury may result Do not place heavy objects on the product Product failure or personal injury may result When using headphones or earphones do not turn the volume too high Having the sound too loud may damage your hearing Correct posture to use the product CHAS Use the product in the correct posture as follows Straighten your back Allow a distance of 45 to 50cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the
47. reen but adjusting Gamma only brightens the medium brightness Grey scale___ Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate____ Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Dot Pitch___ The product and screen consist of red green and blue dots A shorter distance between the dots produces a higher resolution Dot pitch refers to the distance between the shortest distance between dots of the same color Dot pitch is measured in millimeters Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal ines which are then arranged vertically to create an image The horizontal frequency is measured in kHz
48. ress the JOG button Eco Saving Plus S Off Deactivate the off timer so that the product does not power off automatically imer ANNA On Activate the off timer so that the product powers off automatically oro 3 DisplayPort Ver 4 Mowe to the desired option controlling the JOG button UP DOWN and press the JOG button Source Detection Acceleration Key Repeattime rie D The selected option will be applied Enable or disable Off Timer the Off Timer Turn Off After The displayed image may differ depending on the model Set the monitor to Off Timer automatically turn off after a certain Turn Off After time period a X i The displayed image may differ depending on the model Configuring Turn Off After This option is only available when Off Timer is set to On 1 When the Function Key Guide appears select I by moving the JOG button UP Next press the JOG button Move to System controlling the JOG button UP DOWN and press the JOG button Move to Off Timer controlling the JOG button UP DOWN and press the JOG button 2 3 4 Mowe to Turn Off After controlling the JOG button UP DOWN and press the JOG button D Adjust the Turn Off After controlling the JOG button LEFT RIGHT 6 The selected option will be applied The off timer can be set within a range of 1 to 23 hours The product will automatically power off after the specified number of hours For products for the market
49. rs Internet Antenna Wired Signal etc Others e a product is reinstalled or devices are connected additionally after installing the purchased product for the first time e If product fails by natural disaster lightning fire earthquake flood damage etc a product is reinstalled to move to a different spot or to move to a different house If consumable components are all used up Battery Toner Fluorescent lights Head Vibrator e If customer requests instructions on how to use because of another company s product Lamp Filter Ribbon etc customer requests instructions on how to use the network or another company s Program If customer requests a service in case the product has no defect service fee may be charged So If customer requests software installation and setup for the product please read User Manual first e a service technician removes cleans dusts or foreign materials inside of the product e customer requests an installation additionally after purchasing a product through home shopping or online Terminology OSD On Screen Display ____ On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings using menus displayed on the screen Gamma____ The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole sc
50. ss controlling the JOG button LEFT RIGHT mn A WwW N j The selected option will be applied Adjust the brightness level Values closer to 100 mean a brighter screen MAGICBright Brightness 100 Custom Contrast Sharpness E Eye Saver Mode 75 0 gt 4 Return The displayed image may differ depending on the model Contrast Configuring Contrast 1 When the Function Key Guide appears select IM by moving the JOG button UP Next press the JOG button Adjust the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer Move to Picture controlling the JOG button UP DOWN and press the JOG button This option is not available when MagcicBright is in Cinema or Dynamic Contrast mode Move to Contrast controlling the JOG button UP DOWN and press the JOG button This menu is not available when Game Mode is enabled Adjust the Contrast controlling the JOG button LEFT RIGHT Adjust the contrast SAMSUNG p level Values closer MAGICBright to 100 meana mn A WwW N The selected option will be applied Brightness bigger light dark contrast Contrast Sharpness eo og Eye Saver Mode Return The displayed image may differ depending on the model Sharpness Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer
51. t sound for movies Clear Voice Emphasizes voices over other sounds Move to the desired option controlling the JOG button UP DOWN and press the JOG button The selected option will be applied 1 When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Configuring Select Sound Move to System controlling the JOG button UP DOWN and press the JOG button Volume f 4 Sound Mode 2 3 Move to Sound controlling the JOG button UP DOWN and press the JOG button ed 4 Move to Select Sound controlling the JOG button UP DOWN and press the JOG button Select Sound Stereo 0 Left Channel Stereo Enable the sound both from the left and right speakers Right Channel l e Left Channel Set the left and right speakers to play only the left channel of the sound source Right Channel Set the left and right speakers to play only the right channel of the sound source D Move to the desired option controlling the JOG button UP DOWN and press the JOG button 6 The selected option will be applied The displayed image may differ depending on the model Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel This option is not available when MacicBright is in Dynamic Contrast mode This menu is not available when Game Mode is enabled This menu is not available when Eye Saver
52. the Main menu LEFT Close Sublist without saving value Value decreases in the slider Move to next depth ey Value increases in the slider Move to next depth PRESENTER Save the value and close Sublist Reverse Side Port The color and shape of parts may differ from what is shown Specifications are DP IN subject to change without notice to improve quality 4 Description Connects to a PC using a DP cable HDMI IN 1 HDMI IN 2 Connects to a source device using an HDMI cable or HDMI DVI cable SAMSUNG Connect to an audio output device such as headphones DC 14V Connects to the DC power adapter cr J Installation Attaching the Stand Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards A The product is curved Placing pressure on the product when on a flat surface may damage the product When the product is on the ground facing up or down do not put pressure on it g Insert the stand neck into the stand base in the direction shown in the figure Check that the stand neck is firmly connected Tightly fasten the connecting screw at the bottom of the stand base Place the protective Styrofoam cushion included in the package on the floor and place the product facing down on the S
53. ts on top of the product e Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Center e Product failure an electric shock or fire may result Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e Activate power saving mode or a moving picture screen saver if you will not be using the product for an extended period of time Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc Dust accumulation combined with heat can cause a fire electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Do not put DC power adapters together Otherwise a fire may result Remove the plastic bag from the DC power adapter before you use it Otherwise a fire may result Do not let water enter the DC power device or get the device wet An electric shock or fire may result Avoid using the product outdoors where it can be exposed to rain or snow e Be careful not to get the DC power adapter wet when you wash the floor Do not put the DC power adapter near to any heating ap
54. tyrofoam as shown in the image If Styrofoam is unavailable use a thick sitting mat Hold the main body of the product with your hand as shown by the figure Push the assembled stand into the main body in the direction of the arrow as shown in the figure Caution Do not hold the product upside down only by the stand Removing the Stand Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards AN iThe product is curved Placing pressure on the product when on a flat surface may damage the product When the product is on the ground facing up or down do not put pressure on it Place the protective Styrofoam cushion included in the package on the floor and place the product facing down on the Styrofoam as shown in the image If Styrofoam is unavailable use a thick sitting mat While holding the upper part of the monitor with one hanad pull the stand neck with the other hand in the arrow direction to detach the stand Turn the connecting screw at the bottom of the stand base to separate it Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure 20 Adjusting the Product Tilt The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality 0 42 15 42 You can adjust the product tilt
55. udio function is not supported if the source device is connected using the HDMI DVI cable Provided ports may vary depending on the product 26 Connecting to Headphones or Speakers Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable 1 Connect an audio output device such as headphones to K port on the product Provided ports may vary depending on the product Connecting the Power SAMSUNG 1 Connect the power cable to the DC power adapter Then connect the DC power adapter to the DC 14V port on the back of the product 2 Next connect the power cable to the power outlet 3 Press the JOG button on the back of the monitor to turn it on Provided ports may vary depending on the product The input voltage is switched automatically ar Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers To install the latest version of the product driver download it from the Samsung Electronics website at http www samsung com 1 Clickon the Windows Driver downloaded from the website 2 Follow the instructions given on the screen to proceed with installation 3 Select your product model from the list of models SAMSUNG monitor installer Select
56. vel 35 Configuring the HDMI Black Level Settings 35 Eye Saver Mode 36 Configuring Eye Saver Mode 36 Game Mode 37 Configuring Game Mode 37 Response Time 38 Configuring the Response Time 38 Picture Size 39 Changing the Picture Size 39 Screen Adjustment 41 Configuring H Position amp V Position 41 Coordinating OSD Transparency 42 Changing Transparency 42 Language 43 Configuring Language 43 Display Time 44 Configuring Display Time 44 Table of contents Setup and Reset Sound 45 Configuring Volume 45 Configuring Sound Mode 46 Configuring Select Sound 47 Eco Saving Plus 48 Configuring Eco Saving Plus 48 Off Timer 49 Configuring Off Timer 49 Configuring Turn Off After 50 PC AV Mode 51 Configuring PC AV Mode 51 DisplayPort Ver 52 Configuring DisplayPort Ver 52 Source Detection 53 Configuring Source Detection 53 Key Repeat Time 54 Configuring Key Repeat Time 54 Power LED On 55 Configuring Power LED On 55 Reset All 56 Initializing Settings Reset All 56 Information Menu and Others Information Displaying Information 57 57 Configuring Brightness Contrast and Sharpness from the Initial Screen 58 Configuring Volume in the Initial Screen 59 Installing the Software Easy Setting Box 60 Installing the Software 60 Removing the Software 60 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 61 Testing the Product 61 Checking the Resoluti
57. wn left or right or as Enter Press the JOG button when the screen is turned on The Function Key Guide will appear To access the onscreen menu when the guide Function Key Guide is displayed press the corresponding direction button again Function Key Guide may vary depending on the function or product model Please refer to the actual product Direct Key guide The shortcut button screen OSD menu shown below is displayed only when the monitor screen is turned on the computer resolution changes or the input source changes UP DOWN Adjust Brightness Contrast Sharpness EJ Brightness e LEFT RIGHT Adjust Volume Mute PRESS ENTER Display Function Key Guide a gt Volume The function buttons page shows if Eye Saver Mode is enabled C On Features 2p Off Ce Eye Saver Mode Off Function Key Guide UP DOWN LEFT RIGHT Move to the item you want The description for each item will appear when the focus changes PRESS ENTER The selected item will be applied To enter the main menu or to use other items press the JOG button to display the Function Key Guide You can exit by pressing the JOG button again Icons rc eH Description Selects 3 to change the input signal by moving the JOG button in the Function Key Guide screen A message will appear on the top left corner of the screen if the input signal has been changed Selects IL by moving the JOG button in the functio
58. yed image may differ depending on the model Configuring Color 1 2 When the Function Key Guide appears select O by moving the JOG button UP Next press the JOG button Move to Picture controlling the JOG button UP DOWN and press the JOG button Move to Color controlling the JOG button UP DOWN and press the JOG button Red Adjust the red saturation level Values closer to 100 mean greater intensity for the color Green Adjust the green saturation level Values closer to 100 mean greater intensity for the color Blue Adjust the blue saturation level Values closer to 100 mean greater intensity for the color Color Tone Select a color tone that best suits your viewing needs Cool 2 Set the color temperature to be cooler than Cool 1 Cool 1 Set the color temperature to be cooler than Normal mode Normal Display the standard color tone Warm 1 Set the color temperature to be warmer than Normal mode Warm 2 Set the color temperature to be warmer than Warm 1 Custom Customize the color tone When the external input is connected through HDMI DP and PC AV Mode is set to AV Color Tone has four color temperature settings Cool Normal Warm and Custom Gamma Adjust the middle level of luminance Mode1 Mode2 Mode3 Move to the desired option by controlling the JOG button and then press the JOG button The selected option will be applied HDMI Black Level Configuring the HDMI B
Download Pdf Manuals
Related Search