Samsung AS18MWB User Manual
Contents
1.2. Mode Fan Speed 4 To control the airflow direction refer to page 20 Selecting the Turbo Function You can select the Turbo Function if you want to cool your room as quickly as possible The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed 4 The indoor unit beeps CD Mode Fan Speed O TURBO me 2 Press the button gt Result The temperature and fan settings are adjusted automatically Turbo A or A The air conditioner cools the room as quickly as possible After 30 minutes the air conditioner is reset automatically to the previous setting You can select the Turbo function in Auto Cool mode If you select this function in Dry or Fan mode the mode changes to Auto mode 3 Press the 5 button again to stop the Turbo Function before the end of the 30 minute period Result The air conditioner is reset automatically to the previous setting 4 To control the airflow direction refer to page 20 Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling The temperature range decreases in order to perform this function 1 Press the On Off button
3. Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps 2 Press the amp button Result The indoor unit beeps 4 The air conditioner runs in the Energy saving function 4 The outer airflow blade moves up and down 4 The airflow direction indicator is displayed automatically 4 To stop the Energy saving function press the gt again You can select the Energy saving function only in Cool mode 3 Press the button to adjust the temperature until the required temperature is displayed You can set the temperature between 26 C and 30 C If you want to adjust temperature under 26 C cancel the Energy saving function before adjusting the temperature 4 Press the es to select the fan speed until the required setting is displayed Result Auto Low gt Medium High Turbo Each time you press the c5 button the indoor unit beeps 5 Tocontroltheairflow direction refer to page 20 SA Oca Mode Fan Speed O Set Temp Cool J Cc E Saver Auto G Lic Digitalionoff TURBO aa mw ka Set Temp Cool Selecting Good Morning Mode Mode O 4 ao Fan Speed Set Temp LI Mode t Speea Set Temp Auto iz IU c erin BAL Morning G Ne Timer On Up Si 4 Set C
4. The air conditioner runs in Cool mode You can change modes at any time 3 Press the O button to adjust the temperature until the required temperature is displayed You can set the temperature between 16 C and 30 C Result Oo Each time you press the button The temperature adjusts by 1 C The indoor unit beeps If the room temperature is higher than the selected temperature the air conditioner starts cooling If the room temperature reaches the set temperature the air conditioner stops cooling but the fan continues to operate O Set Temp J Auto L l C Set Temp 7 Auto de c 4 Press the c5 button to select the fan speed until the reguired setting is displayed Auto gt Low Medium gt High gt Turbo Result Each time you press the E button the indoor unit beeps 5 To control the airflow direction refer to page 20 Set Temp I auto Ec Mode Fan Speed Selecting Dry Mode Select Dry mode if you want to dehumidify your room You can adjust the temperature in this mode 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed 4 The indoor unit beeps Mode Fan Speed O d 2 Press the O button on the remote control until Dry is displayed ode Result The i
5. On Timer button Off Timer button Digital 7 On Off button If you want to turn on or off the Display of the indoor unit during operation press the a button on the remote control SAMSUNG You must insert or replace the remote control batteries when You purchase the air conditioner 4 The remote control does not work correctly Use two AAA LRO3 1 5V batteries Do not use old and new batteries or different kinds of batteries together Insert two batteries correctly as indicated by the and symbols 1 Remove the battery cover in the rear of the remote control by pushing it with your thumb 2 Insert two batteries respecting the polarities as indicated by the and symbols 3 Close the cover by sliding it back in place Getting Started The User s Manual provides you with valuable information about your air conditioner In order to take full advantage of the air conditioner s features please read this manual carefully before using You have already seen the basic description of the unit on pages from 8 to 10 Starting with the next page you will find a series of step by step procedures for each function available The illustrations in the step by step procedures use three different symbols HOLD DOWN Selecting Auto Mode You can select Auto mode if you want to cool your room automatically You can adjust the temperature in this mode 1 Press the On Off button Result Th
6. and left sides of the indoor unit 2 Detach the front panel by pulling it forwards 3 Hold the edge of the air filter under the front panel and pull to release 4 Remove all dust on the air filter with a vacuum cleaner or brush 5 When you finish insert the top of the filter into the slot and fix it to 5 tabs or 3 tabs of the panel 6 Clean the front panel with a damp cloth and mild detergent do NOT use benzene solvents or other chemicals 7 Reassemble the air filter and the front panel If you have not used the air conditioner for a while select the Fan mode for 3 to 4 hours to dry the inside of the air conditioner Cleaning Deodorizing and Bio filter Option There are Deodorizing and Bio filters inside your air conditioner They remove odours and dust in your room You should clean the filters every 3 months 1 Open the upper front panel by pulling the lower right and left tabs of Bio Filter the panel 2 Pull out the deodorizing and Bio filter f 3 Wash the filters with clean water then dry them in the shade Deodorizing Filter 4 Insert the filters in their place 5 Close the front panel Temperature and Humidity Ranges If you check the following tables you can use your air conditioner more efficiently If the air conditioner is used at Then Heating capacity The air conditioner may stop operating for the reason of protection Low temperatures Wat
7. Adjust the inner blades by moving them left or right Make sure do not touch the inner blades during operation It may cause injury on your fingers Selecting the Auto Cleaning Function You can select the Auto Cleaning Function if you want to sterilize the air conditioner or remove mold You can set this function even when the air conditioner is turned off 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps 2 Press the amp button EN ra Result 4 The tw indicator on the indoor unit lights up and the Auto Cleaning function is set When you turn the air conditioner off it operates the Auto Remote Control Cleaning function for 30 minutes After 30 minutes the air conditioner turns off If you press the amp button when the air conditioner is turned off the air conditioner operates the Auto Cleaning Function for 30 minutes When the air conditioner is turned Mode Operating time Auto Cool Dry 30 minutes D On F Fan 15 minutes gt pil Off 30 minutes Control Panel The Auto Cleaning indicator is displayed only on the indoor unit 3 Press the button again to stop the Auto cleaning function before the end of the 30 minute period A Timer AutoClean E Saver Setting the On Timer You can set the On Timer to tur
8. Contents PREPARATION m Safety Precautions m Name of Each Part m Remote Control Buttons and Display m Inserting the Remote Control Batteries m Getting Started OPERATION m Selecting Auto Mode m Selecting Cool Mode m Selecting Dry Mode m Selecting Fan Mode m Selecting the Turbo Function m Selecting the Energy Saving Function Tyi m Selecting Good Morning Mode m Adjusting the Airflow Direction m Selecting Auto Cleaning Function m Setting the On Timer m Setting the Off Timer m Operating Your Air Conditioner Without the Remote Control 24 RECOMMENDATIONS FOR USE m Cleaning the Air Filter on Your Air Conditioner m Cleaning Deodorizing and Bio filter Option m Temperature and Humidity Ranges m Operating Recommendations m Solving Common Problems TECHNICAL SPECIFICATIONS Register your product at www samsung com global register Safety Precautions The following safety precautions are provided to protect the users safety and prevent property damage Make sure to read the followings and use the air conditioner properly D Keep this user s manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly WARNING _ This indicates the possibility of serious injury or death CAUTION This indicates the possibility of serious injury or dam
9. age to environments when operated incorrectly WHEN INSTALLING j Uv w gt Do not install theunitina Oo gt Do not install the outdoor o gt Do not connect the ground place where itisexposedto unit where there s the riskof to a gas pipe water pipe inflammable gas leakage dropping such as on high lightning rod or telephone outer wall or outside ofthe o earth terrace gt The installation must be carried out by a licensed installer or qualified personnel when installing the unit for the first time or reinstalling it gt Contact the service center if the air conditioner is under water gt Do not pull the electric wire gt Install the switch and circuit or touch the power plug with O breaker only for the wet hands air conditioner 4 N gt Do not bend the electric wire gt Use the power source with o gt If the power plug is by force or weigh down the separatewiringonlyforair damaged replace it by the air conditioner not to be out O conditioner o manufacturer or qualified of order o personnel to avoid the risk AN WARNING DURING OPERATION gt Do not attempt to repair move modify or reinstall the unit on your own Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire o gt Do not place any obstacles in front of the unit Make sure that the unit is correctly vent
10. ancel Morning Set Temp LI Auto a nn BL Moming v gt r ma g Coc Timer On Up CO A Good Morning mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness The Good Morning mode can be selected only when the air conditioner is switched on or off in cool mode 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps jode 2 Press the button to select cool mode Result The indoor unit beeps each time you press the 6 button The air conditioner runs in cool mode Good 3 Press the button Result The timer indicator is displayed The Off timer is blinking on the remote control 4 To set the Good Morning Off timer press the GG buttons once or more times until the reguired Off time is displayed Result The Good Morning mode will be automatically stopped in 8 hours if the operation time is not set You can set the Off timer by pressing the re buttons to turn off the Good Morning mode automatically at the appointed time within a range of 30 minutes to 12 hours Each time the Ory buttons are pressed the time is increased by 30 minutes or 1 hour Good Morning mode will be stopped at the appointed off time Set Cancel 5 Press the 5 button Result The remain
11. ashes Press the button to turn on the air conditioner again Switch the circuit breaker off and switch on it again Strange sound is heard from the air conditioner The sound is heard when the refrigerant gas flow is changed depending on the use of the air conditioner When you press the button noise may be heard that the air conditioner sense the airflow blade Water drops from the outdoor unit connection part Water may form due to the difference of the temperature Technical Specifications MODEL AS18MWBUMG AS24MWBUMG STANDARD ISO SASO ISO SASO 18000BTU h 3750kcal h 24000BTU h 5000kcal h CAPACITY 220V 60Hz COOL 10 5A 12 0A CURRENT HEAT COOL INPUT POWER HEAT KIND REFRIGERANT QUANTITY COOL HEAT DB C H INDOOR WB C H TEMPERATURE DB C H OUTDOOR WB C H NET INDOOR CROSS WEIGHT NET OUTDOOR CROSS ELECTRONICS Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung product contact the SAMSUNG customer care center Customer Care Center Website SOUTH AFRICA 0860 7267864 SAMSUNG www samsung com za U A E 800SAMSUNG 7267864 www samsung com mea PSNMSUN Gd USER S MANUAL ASO9MX B Series AS12M B Series AS18M B Series AS24M B Series Split type Air Conditioner Cooling _ DM DB98 27010A 1
12. e operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps Mode Fan Speed O di 2 Press the button on the remote control until Auto is displayed Result The indoor unit beeps each time you press the re button The air conditioner runs in Auto mode Auto mode cools the room depending on the set temperature The air conditioner changes from Cool mode automatically depending on the current temperature a oo CD Set Temp Auto mH You can change modes at any time c 3 Press the OIO button to adjust the temperature until the required temperature is displayed You can set the temperature between 16 C and 30 C Result Each time you press the OLO button The temperature adjusts by 1 C Jal The indoor unit beeps Auto L L ic j Set Temp Auto The fan speed adjusts automatically Selecting Cool Mode You can select Cool mode if you want to cool your room You can adjust the temperature and the fan speed when cooling 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps d 2 Press the O button on the remote control until Cool is displayed Mode Result The indoor unit beeps each time you press the O button
13. ed room conditioner or put heavy the air conditioner or in a place where there sa object on it baby or an old person ih CAUTION DURING OPERATION gt Do not touch the pipes Do not use the air conditioner gt Do not give excessive shock connected to the air to maintain the machine food o to the air conditioner conditioner pet plant or cosmetics OTHERS gt Be sure that the air filter not to gt The appliance is not intended gt The maximum input power amp be exposed to direct sunlight for use by young children or current is measured infirm persons without according to the IEC standard supervision Young children andthe input power amp current should be supervised to ismeasured according to the ensure that they donot play ISO standard with the appliance Turn off the air conditioner and if the fan stops to operate clean the air conditioner gt Do not clean the air gt The surface of the heat conditioner by spraying water exchanger is sharp so be directly or with benzene careful of it when cleaning thinner or alcohol gt Dispose of the packaging gt All of the manufacturing and material in accordance with packaging materials used for your 4 the local requirements new appliance are compatible AN with the environment and can be gt Be sure to insert the air filter recycled Name of Each Part T
14. er may leak and some malfunction may occur if the heat exchanger freezes Water may condense and drip from the surface of the indoor unit if you don t use E Ki the air conditioner for an extended period of time Operation Outdoor Temperature Indoor Temperature Indoor Humidity Cooling 21 C to 43 C approx 16 C to 32 C approx 80 or less Dehumidifying 18 C to 43 C approx 16 C to 32 C approx X Ifyou use the air conditioner in temperatures over 32 C indoor temperature the cooling capacity may drop Operating Recommendations When you use your air conditioner it is recommended that you read the following Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating the air conditioner will turn off When the power returns the air conditioner will start up again automatically Protection mechanism When the air conditioner is started immediately after being plugged in or stopped the normal operation starts up after 3 minutes for the reason of protection Solving Common Problems Before contacting the after sales service perform the following simple checks They may save you the time and expense of an unnecessary call Problem The air conditioner does not operate at all o Explanation Solution Check if power is on and operate the air conditioner again Check if the circuit breaker is switched off Check if Off Timer is set The temperature is not adj
15. he design and shape can be changed according to the model Indoor Unit Room Temperature sensor Power On Off button 1 Air filter Airflow blades under the panel outlet Timer Good Morning mode Energy saving Operation indicator indicator indicator Power On Off U Power button Set temperature amp room temperature Auto cleaning Turbo Fan speed indicator indicator indicator nit ASO9M Series Air Inlet Rear A SANNI 5 Air Outlet fit Connection Valve Inside nit AS12M gt gt Series Air Inlet Rear Air Outlet Connection Valve Inside AS18M gt Series Air Inlet Rear Connection Valve Inside nit AS24M gt Series Air Inlet Rear Air Outlet Connection Valve Inside Remote Control Buttons and Display ii Airflow direction indicator emperature setting Operating mode indicator Auto Cool Dry Fan Turbo function indicator Fan speed indicator Energy saving indicator Remote control transmission indicator Off Timer indicator Battery life indicator Good Morning mode indicator On Timer indicator Power On Off button Temperature adjustment buttons Mode selection button Auto Cool Dry Fan Swing button Fan speed adjustment button Mode Fan Speed Digital On Off button Turbo button Energy saving button
16. ilated at all times Do not place clothing or other materials over it gt Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury Keep children away from the unit gt Never spill any kind of liquid into the unit Should this happen unplug or main switch off the unit and contact an authorized service center gt When using a wireless remote control the distance should not be more than 7 meters from the air conditioner If applicable gt If the wireless remote control is not used for along time remove the batteries If applicable gt The manufacturer declines any liability for damage resulting from modifications or errors in the electrical or hydraulic connections gt Do not connect the electric heater to the air conditioner or repair it with your discretion gt Failure to observe the installation instruction or use of the unit under conditions other than those indicated in the table Operating limit of aS the unit installation manual P will immediately invalidate gt Do not place any materials the unit warranty so that children cannot step on it T WARNING DISPOSING THE UNIT gt Before throwing out the gt When you need to dispose of gt Please recycle or dispose device it is necessary to pull o the unit consult your dealer of the packaging material for back the battery cells a
17. ing time is displayed In the case of selecting Good Morning mode or adjusting the extra Set Cancel time for Good Morning mode you should press the TS button within 10 seconds If you do not press the button within 10 seconds Good Morning mode will be canceled automatically 6 Press the button to adjust the temperature until the desired temperature is displayed You can set the temperature between 16 C and 30 C Result Each time you press the button The temperature adjusts by 1 C The indoor unit beeps In cool mode Good Morning mode keeps the skin temperature at the best during the 3 stages such as Falling Asleep Stage gt Sound Sleep Stage gt Wake Up Stage in order Falling Asleep Stage This stage supports the environment to quickly cool down Together with comfortable intermittent air you will be able to fall asleep quickly Sound Sleep Stage This stage helps users to take deep sleep and keep the healthy skin by controlling wavy temperature control and insensible air stream Wake Up Stage This stage supports comfortable intermittent air to the room to raise human body temperature for refreshing wake up this section will be repeated When the set time is over 8 hours 1 2 3 4 5 6 7 g meh gt The recommended temperature is set between 25 C and 27 C and 26 C is the most ideal temperature for comfortable sleep gt Airflow blades and fan speed are controlled automatical
18. ly as the above 3 stages in Good Morning mode gt Set Off timer in Good Morning mode over 5 hours You feel disturbed sleep if the Good Morning is set too short or long because the basic off timer is set for 8 hours gt If the Good Morning mode is set less than 4 hours the operation will be stopped after the set time If the Good Morning mode is set over 5 hours it will run as Wake Up stage for the last one hour before stop Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs By adjusting the airflow direction the efficiency of the air conditioner can be increased Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically The outer airflow blade moves up and down to increase the efficiency of the cooling operation 1 Press the button until the required direction is set set Temps jaita Result The outer blade is adjusted vertically ILI auto WENG 2 Press the CD button again to move the blade up and down automatically during operation 3 Press the CQ button again to stop the blade moving up and down Nota If you turn the air conditioner Then the blade Off is closed completely On set to the default position Adjusting the Airflow Direction Horizontally You can adjust airflow direction horizontally manually The inner blades with small fins move the air in the desired direction 1
19. n on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours 1 Press the button Set Temp Auto Down 2 Press the amp or Cz buttons until the desired time is displayed to set the On Timer You can set the time between 0 5 hour and 24 hours SetTemp JAuto 3 Press the 5 button to complete the setting Result The remaining time is displayed The timer indicator stops blinking The selected mode and the temperature on the display disappear after 10 seconds The air conditioner turns on automatically at the appointed time and the On Timer setting disappears 4 Press the 9 button until the desired mode is displayed at the top of the remote control to select the mode in advance Set Temp Auto Result The air conditioner operates in the selected mode when it is H turned on e The most recently used function is set between On and Off Timer a Good Set Cancel Morning toturn on off the air conditioner and Good Morning mode To Cancel the On Timer 1 Set Cancel Press the gt button to cancel the On Timer Set Cancel If you press the gt button both the On Timer and the OffTimer are canceled Loj Good On et Cancel Morning j Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours 1 Pres
20. nd get O If pipes are removed this product in an rid of them safely for recycling incorrectly refrigerant may environmentally responsible reasons blow out and come into o manner o contact with your skin causing injury Releasing refrigerant into the atmosphere also damages the environments CAUTION WHEN INSTALLING pu TME gt Install the air conditioner gt Install the outdoor unit so as gt Install the drain hose to let avoiding direct sunlight or toletthe discharged air out O the water run safely and heater especially water properly Avoid a place that correctly may disturb your neighbor by noise ire REGARDING POWER SOURCE gt Disconnect the circuit breaker gt Contact the service center or gt Contact the service center when you don t use the o manufacturerifyouwantto after turning off the air air conditioner for a long time repair the air conditioner conditioner if strange noise to save energy is heard burning smell or smoke blow DURING OPERATION gt Do not open the front grille gt Avoid cold and hot air Avoid the water from during operation reaching to person petora O getting into the plant directly for a long time air conditioner gt Do not use the air conditioner gt Do not step on the air gt Do not drink the water from for a long time in a clos
21. nditioner and Good Morning mode If you would like to turn off the air conditioner and then to turn on it again automatically at the appointed time by using On Off Timer during non operation you should set the Off Timer longer than the On Timer To Cancel the Off Timer 1 Set Cancel Press the _ button to cancel the Off Timer Set Temp JAuto LI Set Cancel If you press the 5 button both the On Timer and the Off Timer are canceled auto LL Set Cancel Operating Your Air Conditioner Without the Remote Control You can operate your air conditioner directly without the remote control 1 Toturn the air conditioner on press the ON OFF switch on the right side of the indoor unit Result Oo The Operation indicator on the indoor unit lights up The indoor unit beeps The air conditioner starts up in the appropriate mode for the room temperature 2 Toturn the air conditioner off press the On Off button again Even if you turned the air conditioner on with the On Off button y you can control it with the remote control Cleaning Air Filter on Your Air Conditioner For the best use of your air conditioner you must clean it every 2 weeks regularly to remove the dust that accumulates on the air filter CAUTION Before cleaning your air conditioner ensure that you have switched off the breaker used for the unit 1 Open the front panel by pulling tabs on the lower right
22. ndoor unit beeps each time you press the button Set Temp The air conditioner runs in the Dry mode JG C Te You can change modes at any time 3 Pressthe LO button to adjust the temperature until the required temperature is displayed Speea You can set the temperature between 18 C and 30 C Set Temp Result Each time you press the button Ww The temperature adjusts by 1 C auto e The indoor unit beeps The air conditioner starts dehumidifying and the fan speed adjusts automatically 4 To control the airflow direction refer to page 20 Selecting Fan Mode Select Fan mode if you want to ventilate your room It helps to refresh the air in your room You can adjust the fan speed in this mode 1 Press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in Cool mode with Turbo fan speed The indoor unit beeps EK Oa O ED di 2 Press the button on the remote control until Fan is displayed lode Result The indoor unit beeps each time you press the e button The air conditioner runs in Fan mode The temperature is set automatically You can change modes at any time Speea Fan Speed 3 Press the C3 button to adjust the temperature until the required setting is displayed Low Medium High Result Each time you press the E button the indoor unit beeps
23. s the C button Set Temp Auto 2 Press the cay or 7 buttons until the desired time is displayed to set LI the Off Timer You can set the time between 0 5 hour and 24 hours auto 3 Set Cancel Press the C button to complete the setting Result The remaining time is displayed The timer indicator stops blinking The air conditioner turns off automatically at the appointed time and the Off Timer setting disappears If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours during non operation 1 Press the button Set Temp Auto LI BSB th butt auto e Press the utton mal 4 Press the CD button 5 Press the can or 35 buttons until 4 0 Hr is displayed A Set Cancel CD N Ey EEE Down 2 Press the can or y3 buttons until 2 0 Hr is displayed Set Cancel 6 Press the _ button If you would like to turn on the air conditioner and then to turn ar offit automatically at the appointed time by using On Off Timer during operation you should set the On Timer longer than the OffTimer Make sure that the air conditioner will not continue to run after On Timer setting is confirmed Set Temp Auto LI You can check or change the mode and or the temperature ic by pressing the button or the OIO button after setting the OffTimer 4 The most recently used function is set between On and Off Timer to turn on off the air co
24. usted Check if you selected the Fan mode The air conditioner does not operate in the HEAT mode Check if the air conditioner is cooling only model Check if the remote control is for cooling only model The cool air does not come out from the air conditioner 4909 490090 Check if set temperature higher than current temperature Check if you selected the Fan mode Select the Cool Auto or Dry mode Check if the air filter is blocked by dirt Clean the air filter regularly Check if the there is cover on the outdoor unit or any obstacle Remove the cover or obstacle Check if you installed the air conditioner under direct sunlight The window or door may be opened Check if you turn on the air conditioner just now It takes about 3 minutes to cool the room Check if the drain pipe is too long The fan speed is not adjusted In Auto or Dry mode the fan speed is selected automatically The remote control does Check if the battery is discharged Replace the battery not operate Check if the remote control sensor is blocked Check if the air conditioner is placed near strong light The Timer is not set Set Cancel Check if you pressed the 5 button after selecting time Odor is permeated in the room during operation Check if you use the air conditioner in smoky area or there is a smell Ventilate the room or select the Fan mode for 1 2 hours The indoor unit indicator fl
Download Pdf Manuals
Related Search