Samsung AP50Q1CNHAC User Manual
Contents
1. 1 Press the button Result The inner blade moves right and left 2 To stop the blade moving right and left press the button again Note You can t control the airflow direction horizontally in the Long Function You can t control the airflow direction when the fan doesn t operate in the Heat mode Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time You can set the period of time from 1 to 8 hours You can select the Off Timer only when the air conditioner is on To set the operating time press the button one or more times until the required time is displayed Possible time is between 1 hour and 8 hours inclusive Result After blinking of the timer indicator for 5 seconds it will be changed to temperature setting The air conditioner will switch off automatically after the set time and the Off Timer indicator disappears Note You can see or change the setting mode and or the temperature by pressing the button or the D buttons after setting the Off Timer To Cancel the Off Timer Press the button one or more times until the Off Timer indicator disappears Turbo Long Other Function You can use the Lock function on the control panel of the indoor unit Y Temp A 1 Press the 5 buttons simultaneously for 3 seconds Result amp indicates on the control panel The control panel is locked Not2. umm USER S MANUAL APH5030G APH5230F APH5530F AP5001A AP5501A AP5501B FLOOR STAND TYPE AIR CONDITIONER Cooling and Heating BA DB98 19122A 5 Register your product at www samsung com global register Safety Precautions The following safety precautions must be taken when using your air conditioner AN WARNING Risk of electric shock e Can cause injury or death e Disconnect all remote electric power supplies before servicing installing or cleaning e This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard DURING OPERATION Users of this product are cautioned not to attempt repair of this product as eee aoe at their own discretion Instead they are requested to directly contact a designated service center or the outlet at which the product was purchased Never spill any kind of liquid into the unit Should this happen unplug or main switch off the unit and contact an authorized service center Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury Keep children away from the unit Do not place any obstacles in front of the unit Do not spray liquid of any kind into the indoor unit Should this happen switch off the breaker used for your air conditioner and contact your installation specialist Make sure that the unit is correctly ventilated at all times Do not place clothing or
3. Off button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on Stopped It will start up normally after three minutes 2 Ifthe is not displayed on the control panel press the lt Mode button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Dry mode Note You can change modes at any time 3 To adjust the temperature press the S buttons one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive aS Result Each time you press the lt gt buttons The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts removing the excess humidity the quantity of air is adjusted automatically 4 The fan speed is selected automatically amp Automatic 5 To control the direction of the air flow refer to page 16 Airing Your Room If the atmosphere in your room is stale you can air the room using the Fan feature 1 If necessary press the nor button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air conditioner is fitted with
4. other materials over it 4 Ifthe wireless remote control will not be used for a long time remove the batteries If applicable When using a wireless remote control the distance should not be more than 7 meters from the air conditioner If applicable DISPOSING or THE UNIT Before throwing out the device it is necessary to pull back the battery yug c qu cells and get rid of them safely for recycling reasons When you need to dispose of the unit consult your dealer If pipes are removed incorrectly refrigerant may blow out and come into contact with your skin causing injury Releasing refrigerant into the atmosphere also damages the environments Please recycle or dispose of the packaging material for this product in an environmentally responsible manner OTHERS Never store or ship the air conditioner upside down or sideways to nrc avoid damage to the compressor The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency Contents PREPARING YOUR AIR CONDITIONER m Safety Precautions 2 mViewoftheUnit 4 m Remote Control Buttons 6 mGetingSta
5. the unit the power switch is fitted to the wall must be set to ON Using the Control Panel on the Indoor Unit You can operate with the indoor unit when you do not wish to or cannot operate the air conditioner with the remote control You can Adapt the On Off Temperature Fan Speed Operation Mode and Air Swing settings to your specific requirements Example Remote control is broken or lost Using the Remote Control All air conditioner features except Lock function can be controlled from your seat by using the remote control You can Adapt the Turbo Long function and Fan Speed Timer settings to your specific requirements Note You must operate the Turbo Long function and Off Timer with the remote control Cooling Your Room You must select the Cool mode if you wish to adjust the Cooling temperature Fan speed when cooling 1 If necessary press the enor button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on Stopped It will start up normally after three minutes 2 Ifthe is not displayed on the control panel press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner r
6. SAMSUNG 726 7864 www samsung com 800 SAMSUNG 726 7864 8000 4726 www samsung com
7. a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on 4 Stopped It will start up normally after three minutes 2 Ifthe is not displayed on the control panel press the button on the remote control one or more times until it appears Result o The indoor unit beeps each time you press the button The air conditioner runs in the Fan mode Note You can change modes at any time Set Temp 5 gt 3 Select the fan speed by pressing the button one or more times until the required setting is displayed Low x High Timer Turbo Long cz Turbo Result Each time you press the button the indoor unit beeps 4 To control the direction of the air flow refer to page 16 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit your room you can adjust the position of the outer air flow blade on the upper part of the unit thus increasing the efficiency of the air conditioner 1 Press the button Result The outer blade moves up and down RECOMMENDATION When Adjust the blade to face Cooling Upwards Heating Downwards 2 Tostop the blade moving up and down press the button again Adjusting the Air Flow Direction Horizontally There are two sets of air flow blades J ust as the outer air flow blade can be adjusted vertically the inner blade can be adjusted horizontally
8. e You can use the remote control even if the control panel is locked 2 To cancel the Lock function press the GC buttons simultaneously for 3 seconds once again Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner Topic Recommendation Heating performances The heat pump inside the air conditioner absorbs heat from outside air and brings it indoors If the temperature of the outside air drops the air conditioner will heat less Warm air circulation The air conditioner circulates warm air to heat your room as a result some time will be required after starting the air conditioner to warm the entire room If necessary set the air conditioner on before you wish to use the room Frost When outside temperatures are low and humidity is high frost may form in the outdoor unit when heating is selected If this happens The heating operation is stopped The Defrost mode is triggered automatically for about 7 minutes No intervention is required from you after about 7 minutes the air conditioner starts operating again normally High indoor and outdoor If both the indoor and outdoor temperatures temperatures are high and you select the Heat mode the outdoor unit s fan and compressor may stop at times This is normal simply wait until the air conditioner switches on again Power failure If a power failure occurs when the air condi
9. filter 2 Remove all dust on the air filter with a vacuum cleaner or brush 3 When you have finished insert the air filter into the original position and close the front grille 4 Clean the unit with a damp cloth and mild detergent do NOT use benzene solvents or other chemicals Nowe Ifyou have not used the air conditioner for a long period of time set the fan going for 3 to 4 hours to dry the inside of the air conditioner thoroughly Solving Common Problems Before contacting the after sales service perform the following simple checks They may save you the time and expense of an unnecessary call Problem Explanation Solution The air conditioner does not Check that the breaker used for the air conditioner is switched on operate at all Check that the indoor unit is turned on if necessary press the On Off button on the remote control Check whether the Timer indicator on the indoor unit is switched on If so Wait until the switch on time is reached and the air conditioner starts up automatically Cancel the Timer see page 17 for further details The air conditioner does not Check that there are no obstacles between you and the indoor unit operate with the remote control Check the remote control batteries Check that you are close enough to the indoor unit 7 metres yards or less No beep is heard when you press Check that you are pointing the remote control a
10. following figures are shown on pages from 4 to 6 Indoor and outdoor units Remote control buttons and display They will help you find the buttons and understand the symbols displayed Inthe manual you will find a series of step by step procedures for each function available The illustrations in the step by step procedures use three different symbols HOLD DOWN For the The illustrations are Remote control In the upper part Unit itself In the lower part Inserting the Remote Control Batteries You must insert or replace the remote control batteries when You purchase the air conditioner The remote control does not work correctly Note Use two AAA LRO3 1 5V batteries Do not use old batteries or different kinds of batteries together Batteries may be completely discharged after 12 months even if they have not actually been used 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it 2 nsert the two batteries taking care to respect the polarities 4 on the battery with on the remote control on the battery with on the remote control 3 Close the cover by sliding it back until it clicks into place Operating Preparation Look around the indoor and outdoor unit Confirm if any obstacles that may prevent the air flow are present near the air conditioner 1 Turn the power switch on PORTANT To operate
11. mes until the required setting is displayed xz i lt lt z lt Automatic rotated c gt e O Low lt lt High Result Each time you press the lt amp button the indoor unit beeps 5 To control the direction of the air flow refer to page 16 Note You can t control the airflow direction when the fan doesn t operate Selecting the Automatic Operating Mode You can start the air conditioner in the Automatic mode In the Automatic mode the temperature and the optimum fan speed is selected automaticaliy 1 If necessary press the nor button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on Stopped It will start up normally after three minutes G55 2 Ifthe 42 is not displayed on the control panel press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Auto mode Note You can change modes at any time If the indoor temperature is higher than 21 C the air conditioner operates in the Cool mode If the indoor temperature is lower than 21 C the air conditioner operates in the Heat mode 3 To control the direction of the air flow refer
12. onditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on Stopped It will start up normally after three minutes 2 ifthe xx is not displayed on the control panel press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Heat mode Note You can change modes at any time V Temp A 3 To adjust the temperature press the D buttons on the remote control or 5 buttons on the control panel one or more times until the required temperature is displayed Possible temperatures are between 16 C and 30 C inclusive Result Each time you press the D buttons The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts heating provided that the room temperature is lower than the selected temperature For the first 3 5 minutes the fan may not operate to prevent the cool air from running out of the indoor unit LA LCS 4 If the room temperature reachs the set temperature the air mc conditioner stops heating but the fan is still operating gah i The Defrost indicator y appears when frost forms on the outdoor unit and disappears automatically after removing frost 4 Select the fan speed by pressing the amp button on the remote control or 5 button one or more ti
13. our room as far as possible In the Long function the up down orientation of air flow and fan speed are selected automatically 1 If necessary press the CD On off button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on Stopped It will start up normally after three minutes 2 Pressthe button twice Result The air conditioner cools the room as far as possible The fan settings are adjusted automatically 3 To adjust the temperature press the D buttons one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press the buttons The temperature is adjusted by 1 C The indoor unit beeps 4 f you wish to stop the Long function press the button again Result The air conditioner is reset automatically to the previous mode temperature and fan settings 5 To control the direction of the air flow vertically refer to page 16 Note You cant control the airflow direction horizontally in the Long function Removing Excess Humidity If the atmosphere in your room is very humid or damp you can remove excess humidity without lowering the room temperature too much 1 If necessary press the 0 On
14. pper part of the grille then v Pull it slightly forward Air inlet You can operate the air conditioner with the control panel when you do not wish to or cannot operate the air conditioner with the remote control Timer indicator Set temperature Operating mode indicators Indoor temperature Cool Heat Auto Dry Fan Outdoor operating indicator AirSwing Mode FanSpeed V Temp A On off Remote control sensor Long function indicator On Off button Fan speed Temperature adjustment buttons Fan speed adjustment button Lock function indicator Defrost indicator Turbo function indicator Operation mode selection button Air Swing button Air inlet Rear Air outlet Connection valve Remote Control Buttons Air flow swing putons 5 Off Timer button rmperature adjustment buttons Operation mode selection button Cool Heat Auto Dry Fan Turbo Long function button Only in the cool mode Fan speed adjustment button On Off button Getting Started You have just purchased a Floor stand type air conditioner and it has been installed by your installation specialist Your Owner s Instructions contain much valuable information on using your air conditioner Please take the time to read them as they will help you take full advantage of unit s features The booklet is organized as follows The
15. rred 7 m Inserting the Remote Control Batteries 8 mOperatingPreparation 8 m Using the Control Panel on the Indoor Unit 8 m singtiheRemoteControl 8 OPERATING YOUR AIR CONDITIONER m Cooling Your Room 9 m Heating Your ROOM 10 m Selecting the Automatic OperatingMode 11 m Changing the Room Temperature Quickly 12 m Operating to the Long Distance 13 m Removing Excess Humidity 14 mdirngYourRoom 15 m Adjusting the Air Flow Direction Vertically 16 m Adjusting the Air Flow Direction Horizontally 16 PROGRAMMING YOUR AIR CONDITIONER m Setting the Off Timer 17 m Other F nction ez ide tr mi Kan ts ee Ra 18 RECOMMENDATIONS FOR USE m Operating Recommendations 19 m Temperature and Humidity Ranges 20 m Cleaning Your Air Conditioner 21 m Solving Common Problems 22 TECHNICAL SPECIFICATIONS View of the Unit Air flow blades up down orientation d p Air flow blades right left orientation Air outlet Remote control holder Air filter Hold the u
16. t the remote control the On Off button on the sensor of the indoor unit remote control Replace the remote control batteries if necessary The air conditioner does not cool Check that the correct operating mode has been selected or heat Cool Auto Heat The room temperature may be too low or too high Dust may be blocking the air filter guard refer to page 21 for cleaning instructions Check that there is no obstacle in front of the outdoor unit The fan speed does not change Check that the operating mode is set to Cool Heat or Fan when you press the lt button in the Auto Turbo Long and Dry mode the fan speed is controlled automatically The air flow direction does not Check that the air conditioner has been switched on if necessary change when you press the press the On Off button on the remote control Cor Ca button The Timer is not correctly triggered Check that the timer has been programmed correctly see page 17 Odour is permeated in the room Air the room during air conditioning Technical Specifications Model Power Supply APH503QG S 380V 50Hz AP50Q1A APH523QF APH553QF ens 3 220V 60Hz AP5501B ELECTRONICS Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung product contact the SAMSUNG customer care center Country Customer Care Center Web Site TURKEY 444 77 11 www samsung com SOUTH AFRICA 0860
17. tioner is operating the unit is switched off When the power returns you must press the On Off button to restart it Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used If the air conditioner is used at Then High temperature The automatic protection feature may be triggered and the air conditioner stopped Low temperature A water leakage or some other malfunction may happen if the heat exchanger freezes High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for a long periods Mode Outdoor Temperature Indoor Temperature Indoor Humidity Heating 0 C to 24 C approx 27 or less Cooling 21 to 54 C approx 18 C to 32 C approx 80 or less Drying 18 C to 54 C approx 18 C to 32 C approx gt Ifthe outdoor temperature is as low as 0 C the heating capacity drops up to 70 80 depending on the operation condition If the cooling operation is used at over 33 C indoor temperature it does not cool at its full capacity Cleaning Your Air Conditioner For the best use of your air conditioner you must clean it every two weeks regularly to remove the dust that accumulates on the air filter Before cleaning your air conditioner ensure that you have switched off the breaker for the unit 1 Open the front grille then pull out the air
18. to page 16 Changing the Room Temperature Quickly The Turbo function is used to Cool Auto cool your room as quickly as possible Example You have just come home and find that the room is very hot You wish to cool it down as quickly as possible The Turbo function operates for 30 minutes with the maximum setting before retuming automatically to the mode and temperature previously selected 1 If necessary press the CD On Off button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Switched on Stopped It will start up normally after three minutes 2 Pressthe button Result The air conditioner cools the room as quickly as possible The temperature and fan settings are adjusted automatically 4 After 30 minutes the air conditioner is reset automatically to the previous mode temperature and fan setting 3 If you wish to stop the Turbo function before the end of 30 minute period press the button twice Result The air conditioner is reset automatically to the previous mode temperature and fan settings You can t select the Turbo and Long function simultaneously 4 To control the direction of the air flow refer to page 16 Operating to the Long Distance The Long function is used to Cool Auto cool y
19. uns in the Cool mode Note You can change modes at any time E Set Temp p 9 RS V Temp T LIC 3 To adjust the temperature press the lt gt buttons on the remote control or buttons on the control panel one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive a Result Each time you press the ae buttons The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts cooling provided that the room temperature is higher than the selected temperature If the room temperature reaches the set temperature the air conditioner stops cooling but the fan is still operating Set Temp co dc gt Lu 4 Select the fan speed by pressing the button on the remote control or button one or more times until the required setting is displayed Automatic rotated amp gt lt SE l Low High Turbo Result Each time you press the button the indoor unit beeps aa AN AN fil 5 control the direction of the air flow refer to page 16 96 E s Heating Your Room You must select the Heat mode if you wish to adjust the Heating temperature Fan speed when heating 1 If necessary press the CD on off button Result The power indicator on the control panel comes on The indoor unit beeps PORTANT The air c
Download Pdf Manuals
Related Search