Samsung RS25KANS دليل المستخدم
Contents
1. Egg Container CoolSelect Zone Drawer optional Vegetable amp Fruit Drawer Door Bins 11 OPERATING INSTRUCTIONS FOOD STORAGE GUIDE FROZEN FOOD STORAGE IN FREEZER 1 Tempered Glass Shelf e Can be used to store all types of frozen food 2 Door Bin Can be used for small packages of frozen food Plastics Drawer 3 Can be used to store meat dry foods Stored food should be wrapped securely using foil or other suitable wrapping materials or containers 4 Ice chute optional AN Do not put your fingers hands or any other in suitable objects in the chute or ice maker bucket It may result in personal injury or material damage WARNING 12 FOOD STORAGE GUIDE CHILLED FOOD STORAGE IN REFRIGERATOR 5 Tempered Spill Proof Glass Shelf SS be used to store all types of chilled food Safe and hard to be broken e Circular marks the glass surface a normal phenomenon 6 Foldable shelf optional A H you need more taller space for tall items Raise the front of shelf slightly and it back to make it half You can use the shelf in this position to allow taller ite2. 15 the door closed properly No waier is supplied Is the water line connected and the shut off valve open 15 the water supply line crushed Is the water tank frozen because the refrigerator temperature is too low Select a warmer setting on the display panel Je kg Je E Ee 22 35 Ambient Room Temperature Limits This fridge freezer is designed to operate in ambient temperatures specified by its tem perature class marked on the rating plate Temperature Ambient Temperature Symbol Class Maximum Minimum Extended Temperate SN 32 C 90 F 10 C 50 F Temperate N 32 C 90 F 16 C 61 F Subtropical ST 38 C 100 F 18 C 64 F Tropical T 43 109 F 18 C 64 F NOTE Internal temperatures may be affected by such factors as the location of the fridge freezer ambient temperature and the frequency with which you open the door Adjust the temperature as required to compensate for these factors ELECTRONICS
3. Connect the wires 5 Put the front part of the upper hinge cover 1 on the front part of the upper hinge 42 and reattach from the front part of the upper hinge cover first 24 REATTACHING THE REFRIGERATOR DOORS MS Reattaching the Refrigerator Door 1 Insert the lower hinge in the bracket 2 Place the hole in the refrigerator door 9 lower hinge over the lower hinge 3 Insert the upper hinge shaft into the hole After levelling the upper hinge hole with the hole of the cabinet Fasten hinge screws and screw in the clockwise direc tion 4 Connect the wires 5 Put the front part of the upper hinge cover OD on the front part of the upper hinge 2 and reattach it from the front part of the upper hinge cover first OS Je kg Je E 22 25 REATTACHING THE REFRIGERATOR DOORS Reattaching the Water Tube Optional 1 While pressing the front face of coupler insert the water line in the coupler 2 Tighten the screw on the clamp E Reattaching the Front Leg Cover Optional Put on the front leg cover by turning the three screws clockwise as shown in the figure SCREW Ces ADJUSTING THE CLEARANCE BETWEEN THE DOORS lt lt Please level the refrigerator first The doors will be uneven if the refrig
4. If you have a long vacation or business trip and won t use the water or ice dis pensers close the water valve Otherwise water may occur leakage A CAUTION Never put fingers or any other objects in the dispenser opening It may cause injury A USING THE WATER DISPENSER OPTION With the water dispenser you can obtain chilled water easily without opening the refrigerator door In addi tion you can save electricity by reducing the number of times the door is opened by more than 30 Overview Push lever Locking device Water tank cap i H Water tank Le D 1 Water supply device WHEN THE WATER DISPENSER IS NOT USED THE FOLLOWING WAYS RECOMMDED 4 Fix the water supply device tightly into the fixing hole door will not be closed automatically when the water supply device is pulled out for a long time because of cold leaking 7 y 2 Set the locking device to the LOCK ba When pressing the PUSH button with the water supply device only fixed at i the fixing hole and the locking device is set on OPEN the water supply device can be removed from the fixing hole and cold leaks Cz NOTE FILLING THE WATER TANK When exposing to child set the locking device to the LOCK 1 Open the water tank by removing the round cap and fill it up with drinking water Fill the tank
5. Connect coupler A to the tap to the cold water pipe Every join should be protected with sealing tape If it is connected to the hot water pipe it may cause the WARRANTY INFORMATION purifier to malfunction This water line installation is not covered by the refriger ator or ice maker manufacturer s warranty Follow these instructions carefully to minimise the risk of expensive water damage Note If the coupler does not fit on the current tap go the nearest authorised service dealer and purchase the right couplers fittings 30 INSTALLING THE WATER DISPENSER LINE RS Connect the water line to the refrigerator Remove the compressor cover of the refrigerator ERR CONNECTION NUT Connect the water line to the valve as shown in the figure When connected check if there is any leakage If any repeat the connection Reattach the compressor cover of the refrigerator REFRIGERATOR CS Secure the water line Using clip AT fix the water line to the wall the back of refrigerator When the water line is secure make sure whether the water line is not excessively bent pinched or squashed Complete the installation of the water supply line CLIP A Power on the refrigerator and press the lever on the right of the de dispenser until water runs out through the water line and all air has been empty WATER LINE At this time check for any possible leakages at the join point in the
6. run the risk of causing a fire malfunctions and or personal injury Pull the power plug out of the socket before changing the interior light of the refrigerator Otherwise there is a risk of electric shock If you wish to dispose of the refrigerator freezer throw it away after first removing the doors and seals Do so in a way that is not possible for a child to remain trapped inside The refrigerator must be grounded e You must ground the refrigerator to prevent any power leak ages or electric shocks caused by current leakage from the refrigerator Never use gas pipes telephone lines or other poten tial lightening rods as ground Improper use of the ground plug can result in electric shock WARNING Keep ventilation openings in the appliance enclosure or mounting structure clear of obstruction not use mechanical devices or any other means to accelerate the defrosting process other than those recommended by the manufacturer Do not damage the refrigerant circuit Do not use electrical appliances inside the refrigera tor freezer unless they are of a type recommended by the manufacturer CAUTIONS Do not overfill the refrigerator with food When you open the door an item may fall out and cause personal injury or material damage Do not put bottles or glass containers in the freezer When the contents freeze the glass may break and cause personal injury If
7. the tempera times more effective than a normal refrigerator ture of drawer Energy saving fridge freezer e Power consumption is kept to a minimum by distrib uting cool air separately to the refrigerator and freezer Faster cooling times power freeze function allow you to freeze food more quickly Abundant supply of ice and cold water ice and water dispenser provides and cold CF water at any time NOTE This operation instruction covers various models The characteristics of your appliance may differ slightly from those described in this manual CONTROL PANEL Power Freeze Twin cooling Freezer Temp 00 Fridge Temp Deodorizer A Power Cool Fridge Temp Dispenser Model Power Freeze Freezer Temp Ice Type Twin cooling 00 Power Cool Fridge Temp Child Lock FREEZER TEMP BUTTON To set the freezer temperature press the but ton repeatedly to change the set temperature in sequence between 14 C and 25 C POWER FREEZE BUTTON Speeds up the freezing process inthe freeze CHILD LOCK BUTTON ICE TYPE BUTTON Use this button to choose Cubed or Crushed Ice or Ice off FRIDGE TEMP BUTTON To set the frid
8. the wall socket is loose do not insert the power plug There is a risk of electric shock or fire Do not disconnect the power cord by pulling on it Damage to the cord may cause a short circuit fire and or electric shock If the power cord is damaged it must be replaced by the manufacturer a certified service agent or qualified service personnel Do not store articles on the top of the appliance When you open or close the door the articles may fall and cause personal injury and or material damage Do not store pharmaceuticals products scientific materials or temperature sensitive products in the refrigerator Products that require strict temperature controls must not be stored in the refrigerator Do not let children hang on the door If not a seri ous injury may occur If you smell pharmaceutical or smoke pull out the power plug immediately and contact your SAM SUNG Electronics service center Do not touch the inside walls of the freezer or products stored in the freezer with wet hands This may cause frostbite Do not insert your hands into the bottom area under the appliance Any sharp edges may cause personal injury Never put fingers or other objects into the dispenser hole and ice chute It may cause personal injury or material damage Either R600a or R134a are the refrigerants used Check the compressor label on the rear of the appliance and the rating label inside the fridg
9. up to the full level just over 4 2 litres 2 Replace the round by pushing down on it until it clicks into place OPERATING INSTRUCTIONS INSTALLING A REGULAR BOTTLE Press the fixing lever lift the exclusive water tank upwards then 1 remove it Remove the water supply device from the exclusive water tank then set the inner groove of the water supply device in a regular spring water bottle and fix it in position by turning it Turn the water supply device over then fix it in position in the fixing hole Gurgling sounds may be heard when air enters the water tank from regular mineral water or beverage bottles e Some regular mineral water or beverage bottles may not fit the water supply device depending on their size If water does not come out satisfactorily when you press the push button press it again Do not use carbonated drinks such as cola cider or sodas When you press the button the beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of beverage bottle Use bottled mineral water or boiled tap water that does not contain any particles b P Z m Water Tank Supply Device 1 Pull upward and disassemble the hooks on both sides of the large sized cap 2 Loosen the water supply device by turning it in the direc ES tion of the arrow and removing it 3 Wipe the large sized cap and the exclusive water ta
10. yellow water they may drink water CHANGING THE INTERIOR LIGHT Before changing the interior light unplug the appliance from the power supply If you experi ence difficulty when changing the light contact your service centre WARNING 55 INTERIOR LIGHT IN THE FREEZER BASIC MODEL ONLY REFRIGERATOR eeraa Manau eaea push in the direction of the arrow Leer INTERIOR LIGHT THE FREEZER MODEL WITH ICE AND WATER DISPENSER Lift and pull out the maker cover Use a screwdriver to remove the light cover 21 Replace the bulb with a new one and then secure the light cover back into place using a screwdriver Replace the ice maker cover 18 WATER FILTER The water Filter Indicator light e Filter Indicator light lets you know when it is time change your water filter cartridge The light will change from green to orange This tells you that it is almost time to change the current cartridge It is recommended that you replace the cartridge when the light changes to red see Install the water filter section for more information Using the dispenser without the water filter You can not use the water and ice dispenser without a water filter cartridge because of the water line block at the water supply Ordering replacement filters order more water filter cartridges contact your authorized Samsung dealer DO
11. E e Remove the bucket lifting up and pulling out it goes Then lift it up and l Front Leg cover SE 6 Open the freezer and refrigerator doors remove the three screws Door bins Hold the door bin in both hands and then lift it up and detach the cover To reassemble the leg cover put it back into position and tighten the three screws N 3 Drawers Only remove the leg cover if strictly Remove the drawer by necessary pulling it out and lifting it up slightly 4 Ice maker and tray CP not use excessive force when Remove the ice tray by NOTE disassembling the cover other Sa pulling it towards you Then remove the ice maker basic model only REMOVING THE REFRIGERATOR ACCESSORIES wise you may cause damage 1 Tempered glass shelf 3 Fresh fruit amp vegetable drawer and cover Pull the shelf out as far as it will go Then liftitup Remove the compartment by holding the handle and remove it pulling the compartment towards you and lifting it e up slightly Door bins ee by pulling it toward 2 e Hold the door bin in both hands and remove it by lifting it up 4 Wine shelf optional Simpy take the shelf and pull it toward you BEVERAGE STATION optional To access the extra refrigerating com partment hold the compartment door handle and pull it downwards extra refrigerating compartment give
12. G bi sccssssecccscsctssssicsctesscssicssersecsessiss DA99 00494Z REV 0 0 SAFETY WARNINGS e Before operating the appliance please read this manual thoroughly and retain it for your reference WARNING Because these following operating instructions cover various models the characteris tics of your refrigerator may differ slightly from those described in this manual appliance is not intended for use by children or infirm persons without adult supervision e Children should be supervised to ensure that they do not play with the appliance e R600a or R134a is used as a refrigerant Check the compressor label on the rear of the appli ance and the rating label inside the fridge to see which refrigerant is used for your refrigerator refrigerator only use ice makers which made by samsung Electronics for the refrigerator incorporated ice makers are to be installed only by the manufacture or its service agent CAUTION WARNING SYMBOLS USED OTHER SYMBOLS USED O Represents something you must NOT Represents something you must NOT disassemble WARNING Represents something you must NOT touch Represents something you must follow Indicates that a danger of death or serious injury exists Indicates that a risk of personal injury or material damage exists A Indicates that you must disconnect the CAUTION power plug from the socket Represents a ground is needed to prevent e
13. ORS The refrigerator doors have a special door opening and closing feature to make sure that the doors close all the way and are securely sealed When opening the door it will only open so far After reaching a certain point it will remain open When the door is partially open it will close automatically OPERATING INSTRUCTIONS INSTALLATION THE REFRIGERATOR Checking the Dimensions of your Entrance Door e Check the dimensions of your entrance door to determine whether the refrigerator can CS pass through it NOTE Moving refrigerator through door if depth or width of refrigerator is bigger than door s removes refrigerator doors 5 Selecting the Location for the Refrigerator e Select a location with easy access to the water supply Select a location with enough space for the refrigerator e Select a location without direct exposure to sunlight Before disassembling the freezer door the water supply line needs to be disconnected If not the water supply line can be damaged CAUTION See Separating the water supply line from the refrigerator on the next page Allow sufficient space to install the refrigerator on a flat surface If your refrigerator is not level the internal cooling system may not work correctly When you install the refrigerator it is recommended that the clearance maintained as much as specified above NOTE ifthe space is not allowe
14. SIDE BY SIDE REFRIGERATOR OWNER S MANUAL AND INSTALLATION CONTENTS SAFETY WARNIER NEESS EENS gur 2 OPERATING INSTRUCTIONS SETTING UP THE REFRIGERATOR 4 MORE ECH Eege 4 CONTROL PANEL ee 5 DIGITAL PANEL al TEMPERATURE CONTROL _ 2 ICE AND COLD WATER DISPENSER USING THE WATER SHELVES AND BINS FOOD STORAGE GUIDES CoolSelect Zone Drawer GUIDE REMOVING FREEZER ACCESSORIES tee REMOVING REFRIGERATOR ACCEGGORIEG 16 BEVERAGE STATION optional 002 22 16 CLEANING ACCESSORIEG CHANGING THE INTERIOR LIGHT WATER FILTER 2 19 DOORS 19 INSTALLATION INSTRUCTIONS INSTALLATION OF THE REFRIGERATOR 20 REMOVING THE FRONT LEG COVER REMOVING THE REFRIGERATOR DOORS REATTACHING THE REFRIGERATOR ADJUSTING THE CLEARANCE BETWEEN THE DOORS CHECKING THE WATER DISPENSER LINE INSTALLAING THE WATER DISPENSER TROUBLESHOOTIN
15. ages the cool down time vary NOTA g s O Chill Q Cool AN For Quick Cool option food stored in the CoolSelect Zone SE Drawer should be removed WARNING Thaw button Drips loss and quality deterioration of meats reduces the freshness RAS of foods After Thaw is selected warm and cold air is alternately sup plied Quick Cool into the CoolSelect Zone Drawer a Depending on the weight of meat thawing time can be selected for 4 hrs 6 hrs 10 hrs and 12 hrs sequentially e When Thaw ends CoolSelect Zone display returns to chill AN vs O 78 D condition G cancel this option press any button except Thaw Chill approximate thawing time of meat and fish are shown 22 below Based tinch thickness sl Select Thaw Time 4 hours 6hours 10 hours 12 hours 400 g 6009 8009 10000 Depending on the size and thickness of meat and fish the thawing time may vary Nore he above weight represents the total weight of food in the CoolSelect Zon Drawer Ex The total thawing time for 400g frozen beef and 600g frozen chicken will be 10 hours AN e With the Thaw option food stored in the CoolSelect Zone Drawer should be removed WARNING 15 OPERATING INSTRUCTIONS REMOVING THE FREEZER ACCESSORIES 1 Tempered glass shelf l l 5 maker bucket optional EE E
16. d maintain at least 5cm clearance to the back wall 20 REMOVING THE FRONT LEG COVER Removing the Front Leg Cover Optional Open the freezer and refrigerator doors and then take off the front leg cover assembly by turning the three screws counter clockwise y FRONT LEG COVER IY 8 SCREW La La La SS Separating the water supply line from the refrigerator Optional 1 Remove the screw from clamp 2 Remove the water tube by pressing the coupler and pulling the water tube away ES ae a a Je kg Je E Ee 22 A Do not cut the water tube but separate it from the coupler WARNING 21 REMOVING THE REFRIGERATOR DOORS Lift the door straight up careful not to pinch the water tubing and wire harness the door NOTE Place doors on a protected surface RS Removing the Freezer Door 1 With the door closed remove the upper hinge cover using a screwdriver and then disconnect the wires 2 Remove hinge screws and ground screw counter clockwise and take off the upper hinge along the arrow Take care when removing the door to ensure that it does not fall on you 3 Remove the door from the lower hinge by 4 Remove the lower hinge from the bracket carefully
17. e to see which refrigerant is used for your refrigerator CAUTIONS The refrigerant used in the refrigerator freezer and the gases in the insulation material require special dispos al procedures Ensure that none of the pipes on the back of the appliance are damaged prior to disposal Do not use wet or damp cloth when cleaning the plug Remove any foreign matter or dust from the power plug pins Otherwise there is a risk of fire If the refrigerator is disconnected from the power supply you should wait for at least five minutes before plugging it back If the refrigerator is not to be used for a long period of time pull out the power plug Deterioration in the insulation may cause fire The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Q Do not place the equipment directly under the sunlight The appliance must be positioned so that the plug is accessible after installation If the power cord is damaged it must be replaced by manufacturer a certified service agent or qualified service personnel isobutane refrigerant R600a a natural gas with high environmental compatibility that is however also combustible When transport ing and installing the appliance care should be taken to ensure that no parts of the refrigerating circui
18. ed water filter cartridge may cause water to briefly spurt from the dispenser NOTE Before reinstalling the water filter remove the wine shelf cS Check the amount of water supplied to the ice tray 1 Lift up and pull out 2 the ice maker bucket in the freezer 2 When you press the test button the ice cube container is filled with water from the water supply tap Check the amount of water see the illustration below If the water level is too low the ice cubes will be small This is not a problem with the ice maker CHECK THE WATER but of the water pressure in the pipe and occurs frequently When this problem occurs contact the dealer service center to check the amount of water supplied TOO HIGH 4 OPTIMUM LEVEL TOO LOW 34 TROUBLESHOOTING The refrigerator does not work at all or it does not chill sufficiently Check that the power plug is properly connected 5 the temperature control on the display panel set to the correct temperature Try seting it to a lower temperature 15 the refrigerator in direct sunlight or located near a heat source 15 the back of the refrigerator too close to the wall The food in the refrigerator is frozen 15 the temperature control on the display panel set to the correct temperature Try seting it to a warmer temperature 5 the temperature in the room too low Did yo
19. en the doors turning the bolt 2 turn clockwise w or counter clockwise When you turn clockwise w the door goes up NOTE N WRENCH BOLT BOLT yy 3 After adjusting the doors turn the nut turn clockwise wo until the lower end of the bolt then tighten the bolt again with the wrench to fix the nut d WRENCH WRENCH D C BOLT CF If you do not fix the nut firmly the bolt 2 may be released NOTA 28 CHECKING THE WATER DISPENSER LINE OPTIONAL 1 In order to operate the ice maker properly water pressure of 1 4 10 kgf cm is required In this range a 100 cc paper cup can be filled in 10 seconds 2 The water filter removes particles It does not sterilize or destroy any micro organisms 3 If the refrigerator is installed an area with low water pressure below 1 4kgf cm you should install a booster pump to compensate for the low pressure 4 Ensure the water storage tank inside the refrigerator is preperly filled initially Push the water dis penser lever until the water runs from the outlet CP A universal water supply kit is available at extra cost from your dealer The refrigerator manufacturer NOTE recommends using a water supply kit containing copper tubing 5 Checking the Parts Interior model oo tape SC A x 8EA Tapping screw x 12EA Sy Ba Water line Pu
20. erator is not level Case 1 Freezer door is lower than Insert a straight screwdriver into a that of the refrigerator slot of the control lever turn it clockwise and level the refrigerator DRIVER Pal 2 CONTROL LEVER Case 2 Freezer door is higher than Insert a straight screwdriver into a that of the refrigerator slot of the control lever turn it clockwise and level the refrigerator DRIVER 7 gt CONTROL LEVER CF Do not make small adjustment by turning the control lever Please refer to the next page NOTE 27 Je Je E D ADJUST THE CLEARANCE BETWEEN THE DOORS Making small adjustments between doors If the door of the freezer is lower than that of If the door of freezer is higher than that of the the refrigerator refrigerator ge gt N Adjustment part J Adjustment part Please open the doors and adjust the doors as follows 1 Release the nut on the lower hinge until the upper end of the bolt 2 When you release the nut use enclosed hex wrench to turn the bolt a little counter clockwise NOTA to make the loose with your fingers BOLT BOLT J NUT 2 Please adjust the height difference betwe
21. everage station cover can be broken WARNING 13 OPERATING INSTRUCTIONS CoolSelect Zone Drawer GUIDE Select button Optional 4 Soft Freeze e When Soft Freeze is chosen the temperature on the digtal panel displays 5 C regardless of the set temperature of the refrigerator Soft Freeze temperature helps keep meats and fishes fresh longer cut meat easily without drips Chill e When Chill is chosen the temperature of the CoolSelect Zone Drawer is kept at 1 C regardless of the set refrigera tor temperature Chill temperature helps keep meat or fish fresh longer Cool 3 e When Cool is chosen the temperature will be the same as the set temperature of the refrigerator The digital panel shows the same temperature as that of the display panel CoolSelect Zone Drawer allows extra refrigerator space 14 N CO Cool CoolSelect Zone Drawer GUIDE Quick Cool button You can use the Quick Cool feature with the CoolSelect Zone Quick Cool allows 1 3 canned beverages to cool within 60 min r cancel this option press the Quick Cool button again 2 3 MIN CoolSelect Zone returns to the previous temperature Quick Cool e When Quick Cool ends it returns to the Cool temperature seting 4 Thaw Depending on the bever
22. ge temperature press the but ton repeatedly to change the set tempera ture in sequence between 7 C 1 C POWER COOL BUTTON Speeds up the cooling process in the refrigerator When the child lock button is pressed for 3 seconds the child lock indicator is on with an audible tone when it is locked all keys can not be modified except the Ice type button This function will prevent accidental setting that may be caused by children or pets To unlock the setting functions press this button for 3 seconds again Also this button has another function When this button is pressed for 3 seconds lock indication lamp turn on the heater for sweat control is off at a same time If sweat is appeared around the cover dispenser or beverage station with this function press this button for 3 seconds again then the light will turn off and the sweat control function will be performed and all keys will be unlocked at a same time OPERATING INSTRUCTIONS CONTROL PANEL Power Freeze Power Cool Cool Select zone Power Freeze Freezer Temp Ga Fridge Temp Power Cool Freezer Temp DIGITAL DISPLAY AND CONTROL Fridge Temp Dispenser Model With CoolSelect Zone Power Freeze Power Cool Cool Select zone Power Freeze Freezer Temp Fridge Temp Power Cool Freezer Temp Fridge Temp Select Filter Indicator Child Lock Ice Ty
23. iently When the refrigerator is plugged in low you can store food in the the interior light should come on when refrigerator After starting the refrigerator it open the doors takes a few hours to reach the appropriate temperature Twin Cooling System Beverage Siation optional refrigerator and the freezer have two evapora do not have to open the main door to access tors Given this independent system the freezer frequently used food in the extra and the refrigerator are cooled individually as refrigerating compartment This saves time required and are therefore more efficient Food and money odor from the refrigerator does not affect food in the freezer due to separate of air flow circulation Deodorizer optional e Reusable deodorizer keeps the refrigerator air Multi Flow System fresh and odor free Cool air circulates through multiple vents on every shelf level This provides even distribution of CoolSelect cooling inside cabinets to keep your food fresh Zone Drawer longer optional e User can select Door Alarm Quick Cool Thaw beeper reminds you if the door is left open and Select buttons for quickly chill thaw High humidity for fresher food and cools items You can keep food fruit and vegetables fresh for Select Soft Freeze longer because your refrigerator supplies highly Cool or Chill to humidified cold air This can be up to four or five control
24. it tightly into place where to screw gt TWO PURIFIER LOCK STATION PURIFIER LOCK STATIONS WATER LINE CONNECTION NUT WATER TUBE Secure the purifier in position Fix the purifier in position as shown in the figure PURIFIER on the right TIGHTENING BAND Connect the water line to the refrigerator Remove the compressor cover of the refrigerator 5 Connect the water line to the valve as shown the fig ure When connected check if there is any leakage If any repeat the connection E Reattach the compressor cover of the refrigerator COMPRESSOR COVER OF REFRIGERATOR 5 Ge Secure the water line Using clip A fix the water line to the wall the back of refrigerator When the water line is secure make sure whether the water WATER LINE E line is not excessively bent pinched or squashed 33 INSTALLING THE WATER DISPENSER LINE Remove any residual matter inside the water supply line 1 Turn on the main water supply amp shut off valve of the water supply line 2 Run water through the dispenser until the water runs clear ICE WATER 6 7 minutes This will clean the water supply system and clear air from the lines 3 Additional flushing may be required in some households 4 Open the refrigerator door and check if water leaks around the water filter newly install
25. lation is not covered by the refriger ator or ice maker manufacturer s warranty Follow these instructions carefully to minimise the risk of expensive water damage COUPLER A Note If the coupler does not fit on the current tap go the nearest authorised service dealer and purchase e the right couplers fittings TAP Select the location where the purifier is to install Model with the purifier Cut the water line attached to the purifier ee to the appropriate place after measuring the distance between the purifier and the cold water tap PURIFIER WATER If you wish to reassemble the water inlet and outlet sides of the purifier during purifier installation see the reference illustration WATER INLET COUPLER SIDE OF PURIFIER Remove any residual matter inside the purifier Model with the purifier Open the main water tap to check whether water is running through the water tube on the water inlet side of the purifier OUTLET SIDE OF PURIFIER If water does not come out through the line check whether the tap is open Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed WERE WATER 32 INSTALLING THE WATER DISPENSER LINE gt Attach the purifier lock stations TWO Sech ss Hold the purifier lock stations in the appropriate position under the sink for example and fix
26. lectric shock SS It is recommended that this symbol be handled by service man WARNINGS Do not plug several appliances into the same multi ple power board This could cause overheating and the risk of fire Make sure that the power plug is not squashed or dam aged by the back of the refrigerator A damaged power plug may overheat and cause fire Do not bend the power cord excessively or place heavey articles on it This constitutes a fire hazard If the power cord is damaged have it replaced immediately by the manufacturer or its service agent Do not directly spray water inside or outside the refrigerator There is a risk of fire or electric shock Do not spray inflamable gas near the refrigerator There is a risk of explosion or fire Do not insert the power plug with wet hands You may receive an electric shock Do not put a container filled with water on the refrigerator e If spilled there is a risk of fire or electric shock Do not install the refrigerator a damp place or place where it may come in contact with water Deteriorated insulation of electrical parts may cause an electric shock or fire Do not store volatile or flammable substances in the refrigerator storage of benzene thinner alcohol ether LP gas and other such products may cause explosions D Do not disassemble or repair the refrigerator by your self e You
27. lifting the door lower hinge by lifting the lower hinge 9 in the direction of the arrow 22 REMOVING THE REFRIGERATOR DOORS Sa Removing the Refrigerator Door 1 With the door closed remove the upper hinge cover using a screwdriver and then discon nect the wires 2 Remove hinge screws and ground screw counter clockwise and take off the upper hinge in the direction of the arrow Take care when removing the door to ensure that it does not fall on you 3 Remove the door from the lower hinge by 4 Remove the lower hinge from the bracket lifting the door lower hinge by lifting the lower hinge in the direction of the arrow Je kg Je E Ee 22 CP After disassembling the freezer refrigerator door move it to the appropriate location you must reassemble it NOTE 23 REATTACHING THE REFRIGERATOR DOORS Reattaching the Freezer Door 1 Insert the lower hinge in the bracket 2 Reattach the freezer door by inserting the lower hinge hose 9 in the lower side of the door into the hole in the lower hinge and pulling the hose down 3 Insert the upper hinge shaft into the hole After levelling the upper hinge hole with the hole of the cabinet Fasten bolts and screw in a clockwise direction 4
28. ms to be stored 7 CoolSelect Zone Drawer optional e Helps to preserve the taste of food and prolongs its freshness Use to store cheese meat poultry fish or any other foods used quickly 8 Fruit amp Vegetable Drawer Upper and Lower 5 used to store fruits and vegetables This drawer is airtight Optimized humidity control design helps to preserve the freshness of the stored vegetables and fruits 9 Dairy Compartment be used to store butter margarine and cheese 1 ti Door Bins LA Can be used to store foods in small packages such as milk and yogurt 12 Beverage Station optional 7 Can be used to store the frequently used items such as canned beverages and snacks and allows access to these items without opening the refrigerator door Bottles should be stored tightly together so that they do not fall out CAUTION 43 Egg Container Put eggs in the container and place them on the shelf Wine Shelf optional your wine bottle on the shelf to maintain their taste The Rail that should not be used for e If you a long vacation planned you must empty the CoolSelect zone model refrigerator and turn it off Wipe excess moisture from the inside and leave the doors open Otherwise odor and mold may develop In case the model has CoolSelect zone Do not insert a shelf to this rail or the shelf can collide with beverage station coverand the b
29. nk with warm water and detergent d e Hold the and pull it upwards to remove it Clean the cap Y and waste filtering bottle attached to the cap with a soft NM n brush Ss 4 After cleaning the water supply device with a soft brush press the water supply device operation lever then wash it in running water AN Clean the water tank frequently if it used to dispense tea or other such beverages Only use fil tered tea For better hygiene beverages with a high sugar content juice soft drinks are not recommended WARNING Deposits can be cleaned by wiping the tank with a cloth dampened in vinegar or salt water Check that the rubber seal on the water supply device has not slipped off or is not damaged by a sharp edged object Otherwise it may leak 10 SHELVES AND BINS 555 FREEZER Door Bin Ice maker m METT Light Ice chute Shelf Twist ice maker Basic model 555 REFRIGERATOR tray Drawer Front leg cover Dairy compartment Lights Wine Self Optional Water tank Door Bin Beverage Station Foldable Shelf optional Deodorizer optional
30. pe Ice Type 25 oi Cubed Crushed ice ott Child Lock DIGITAL PANEL Twin Cooling CoolSelect Zone Power Freeze Freezer 00 Fridge Temp Power Cool Power Freeze Deodorizer A DIGITAL DISPLAY AND CONTROL Twin Cooling Power Freeze Freezer Temp 00 Fridge Temp Power Cool Power Freeze Freezer Temp Filter Indicator E Child Lock Filter Indicator Ice Type w w 1ce Off Freezer Temp indicates the current freezer temperature Fridge Temp indicates the current refrigerator temperature Quick Cool Thaw and Select show the status of the CoolSelect Zone Drawer This light is on when you press the Power Freeze button Power Freeze Press this button to quickly return the freezer to the set temperature If you need much ice you can get ice faster Press the button again to cancel the Power Freezer mode Power Cool Te light is on when you press the Power Cool button Press the button to quickly return the refrigerator to the set temperature Press the button again to cancel the Power Cool mode Deodorizer This light indicates the recyclable deodorizer is in operation e Recycle the honeycomb cartridge once or twice a year see Cleaning the A Accessories section Cubed Crushed Ice and Ice e ICE Press the Ice Type button in to choose VC e Kei D Cubed Ice Crushed Ice or Ice to stop making Cubed Cru
31. rifier lock station Purifier Tightening band Exterior model 29 Je kg Je E Ee 22 INSTALLING OF THE WATER DISPENSER LINE For Interior Model Case 1 Connecting to water supply line Shut off the main water supply line and turn the Ice maker to the off position Locate the nearest cold drinking water line 7 Follow the instructions in the ice maker installation kit 1 Cold Water line 2 Pipe Clamp 3 Copper or Plastic line 4 Compression Nut 5 Compression Sleeve 6 Shut Off Valve 7 Packing Nut RS Connect the water line to the refrigerator Slip the compression nut and plastic ferrule through the plastic tube ap After inserting the sleeve tighten the compres sion nut onto 1 4 compression fitting union o Compression r Nut A Ferrule __ Sleeve 8 1 Compression Ferrule oe Compressi Nut LS overtighten the compression nut NOTE Slip the compression ferrule and nut on copper or plastic tubing as shown Tighten the comperssion nut onto the com pression fitting union Turn water on and check for any leakege CF Waterline must be connected to drinkable water only NOTE Case 2 Check the water supply line Connect the water pipe with coupler and tap CAUTION Close the main water tap The water line must be connect ed
32. s It is recommended that you use the extra refrigerating compartment for frequently used foods like beverages you added convenience because you do not When the door is opened it can be need to open the main refrigerator door In used as a tray to support items such addition this saves energy as beverage bottles and glasses Do not scratch the surface of the door AN Before removing the freezer and refrigerator accessories please move the stored foods to other space door of the Beverage Station should never be removed WARNING The Beverage Station cannot function if its door is missing When you close the door of beverage station be careful not to put your hands or fingers in a position where those can be caught or injured If you use the opened door as a tray do not place heavy objects on it Do not allow children to hang on the door because there is a risk of personal injury or material damage 16 CLEANING THE ACCESSORIES Inside Clean the accessories using a mild detergent Then wipe with a dry cloth After washing the accessories make sure that they are dry before using them again Exterior Wipe the front control panel with a clean cloth The doors and door handles should be cleaned with a mild detergent and cloth Dry them with a clean cloth exterior should be polished once or twice a year Rear Use a vacuum cleaner to remove du
33. shed Ice Off e Bright icon indicates the ice state currently operated Filter Indicator When the green light changes to orange it is time to replace the water filter If indicator is red quick replacement is strongly recommended e When the water filer is replaced reset the indicator by pressing the Ice Type button and the Child Lock buttons simultaneously for 3 seconds turn this indicator off press the Ice Type and Child Lock buttons simulta neously for 5 seconds OPERATING INSTRUCTIONS TEMPERATURE CONTROL Freezer freezer temperature can be set between 14 C and 25 e Press the Freezer Temp button repeatedly until the desired set temperature is shown in the temperature display temperature display changes in sequence between 14 and 25 C When the display reaches 14 C it returns to 25 C After five seconds the display reverts to the actual freezer temperature The unit will then work to adjust to the new desired temperature Refrigerator refrigerator temperature can be set between 7 C 1 Press the Fridge Temp button repeatedly until the desired temperature is shown in the temperature display temperature display changes in sequence and reverts in the same way as the freezer When ice cream is stored above 15 C in freezer it may melt AN temperature of the freezer or the refrigerator rises from frequent openings
34. st once or twice a year Ice and water dispenser and drainage grid optional Use a damp cloth to clean the ice and water dispenser Then wipe it with a dry cloth Keep the and water dispenser and drainage grid dry Beverage station optional Use a damp cloth to clean the extra refrigerating compartment Then wipe it with a dry cloth Rubber door seals If the rubber door seals are dirty the door will not close properly and the refrigerator and freezer will be unable to function efficiently Clean them with a mild detergent and damp cloth Then wipe them with a dry cloth When cleaning the appliance or if you are not going to use it for a long time remove the power plug leave the NOTE doors open and keep the appliance dry Do not clean it by spraying it directly with water Do not clean it with benzene thinner or car detergent 17 OPERATING INSTRUCTIONS CLEANING THE ACCESSORIES Deodorizer optional e Remove the cover with a flat blade screw driver as shown out the cartridge from the cover and soak it in clean warm water for at least 4 hrs Completely dry out the cartridge with sunlight for at least 8 hrs in an open area Repeat this process once or twice a year D Without CoolSelect zone Model 2 Cartridge CF If it is dried in a confined area odor may be spread to that area NOTE e Keep the children away from
35. t are damaged 0 This appliance contains a small amount of Refrigerant squirting out of the pipes could ignite or cause an eye injury If a leak is detected avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for sever al minutes In order to avoid the creation of a flammable gas air mix ture if a leak in the refrigerating circuit occurs the size of the room in which the appliance may be sited depends on the amount of refrigerant used The room must be 1m in size for every 8 g of R600a refrigerant inside the appliance The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance Never start up an appliance showing any signs of dam age If in doubt consult your dealer lt gt Lu LL lt wn SETTING UP THE REFRIGERATOR Once you have performed the following steps your refrigerator should be fully operational If not check the power supply and electricity source If you have any questions contact your SAMSUNG service Center Place the refigerator in an appropriate location Set the temperature control to the coldest 1 with reasonable clearance between the wall 3 temperature and wait for an hour The and the refigerator freezer should get slightly chilled and the refer to installation instructions in this mannal motor should run smoothly Once the refrigerator temperature is suffic
36. u store the food with a high water content in the coldest part of the refrigerator You can hear unusual noise or sounds e Check that the floor is levelled and stable 15 the back of the refrigerator too near to the wall e Was anything dropped behind or under the refrigerator ticking sound may be heard from inside the refrigerator but this is normal This occurs because various accessories are contracted or expanded The front corners and sides of the cabinet are hot condensation occurs Anti condensators are installed in the front corners of the refrigerator to prevent condensation e Condensation can occur when you leave the door open for a long time Ice is not dispensed Did you stop the ice making function Is there any ice in the ice storage unit 15 the water line connected and the shut off valve open 15 the freezer temperature too warm Set the temperature lower Did you wait for 12 hours after installation of the water supply line before making ice You can hear water bubbling in the refrigerator bubbling comes from the refrigerant circulating in the refrigerator and is normal There is a bad smell in the refrigerator Wrap food with a strong smell so that it is airtight Throw away any rotten food Frost forms on the wall of the freezer 15 the air vent blocked Allow sufficient space between the foods stored for efficient air circulation
37. water line After securing the water line move the refrigerator to the required location Once the refrigerator is in position do not move possibly 5 Install the water filter As shown separate the fixed cap in the refrigerator by rotating it counterclockwise Remove the water filter from the box and put a month indicator sticker on the filter as shown Write the month you installed the filter on the label EX If the water filter was installed in March put MAR Remove the protective cap then position and insert the filter as shown Slowly turn the water filter clockwise 90 to align the indication mark on the cover locking the filter in postion Do not overtighten SEPARATION lt OF RED CAP ALIGN THE INDICATION MARK WITH LOCK POSITION Je kg Je E Ee 72 STICKER A MONTH INDICATION CAUTION Please check if the indication line aligns with the lock position 31 INSTALLING THE WATER DISPENSER LINE For Exterior model SS Connect to the water supply line Connect the water pipe with coupler and tap Close the main water tap Connect coupler A to the tap Every join should be protected with sealing tape CAUTION The water line must be connected to the cold water pipe If it is connected to the hot water pipe it may cause the WARRANTY INFORMATION purifier to malfunction This water line instal
38. when sweeping WARNING blinking when the freezer and refrigerator return to the normal temperature and from warm food This may cause the digital display to blink The digital display will stop ICE and COLD WATER DISPENSER Ice Maker Basic Model Ice Dispenser The ice maker produces 10 cubes at once and about 120 cubes a day automatically This quantity may be influenced by factors such as the freezer temperature the Power Freeze function and the number of door openings When your refriger ator is plugged in the Cubed Ice mode is automatically select ed Press the Ice Type button to select the type of ice E S ei Cubed Ice TT For Cubed ice E7 0 87 For Crushed Crushed Ice vty No Ice Ey Wi 718 200 No Ice d For ice off If the Ice remains the Ice bucket the cubed ice is obtained Push the ice dispenser lever with a cup Place a cup to line of the dispenser lever to prevent the ice from jumping out Push WARNING Pull out the ice tray water until it reaches the water level indicator Put the ice tray back in place Water Dispenser The capacity of the water tank is approximately 1 2 1 Cold Water Push the water dispenser lever with cup If you have just installed the refrigerator throw away the first six glassfuls of water to flush out impurities in the water supply system
Download Pdf Manuals
Related Search