Home
Samsung AQV18AWAX Manual de Usuario
Contents
1. 5 The Deodorizing filter can be placed in any of the 4 slots beneath the air filter 3 Install the new Deodorizing filter back into position 4 Reattach the front panel Insert the hooks located on the middle of the panel into the correct guide then slide it up Then push in the bottom and middle part of the panel e The replacement of the Deodorizing filter differs depending on usage and environmental conditions e Even if Deodorizing and DNA filters are installed in an inverted position it will not affect its filtration system MAINTAINING YOUR AIR CONDITIONER If the air conditioner will not be used for an extended period of time dry the air conditioner to maintain its best condition 1 Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug There may be internal damage if moisture is left in its components 2 Before using the air conditioner again dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours This helps remove odors which may have generated from dampness cleaning and maintaining 31 appenak TROUBLESH
2. good sleep mode good sleep mode lets you sleep comfortably in ideal temperatures while saving energy good sleep mode can be set up when the air conditioner is on 1 Set operating mode Press the Mode button on the remote control until Cool Heat appears on the remote control display good sleep is only available in Cool Heat mode 2 Press the good sleep button on the remote control good sleep indicator appears and the Off timer indicator starts blinking on the remote control display Set Temp ILI c Timer Up Set Cancel sleep good 3 Set the length of time you want the air conditioner to stay on Set Temp Cool Default good sleep time is set to 8 hours Press the Up or WI Down button on the remote control to change the time n auto e setting while the Off timer indicator is blinking good a Diri sleep Off ar You can set the time up to 12 hours increasing by 30 minute intervals up to the first 3 hours and then hourly GS after the first 3 hours a EAR CI CI 4 Press the Set Cancel button on the remote control to activate The remote control display will show the hour s you have set When the set time has elapsed the air conditioner will automatically turn off and then good sleep indicator disappears If good sleep mode is not set within 10 seconds the air conditioner will end setting KK e Temperature Fan speed Air swing c
3. Press Set Cancel button to activate the Off timer When you set the time there can be two possible options On timer is shorter than Off timer The air conditioner will turn on and then off automatically Set up should be done while the air conditioner is off Example If the On timer is set at 3 hours and the Off timer at 5 hours the air conditioner will turn on in 3 hours then operate for the next two hours before turning off automatically On timer is longer than Off timer The air conditioner will turn off and then on automatically Set up should be done while the air conditioner is operating Example If the On timer is set at 3 hours and the Off timer at 1 hour the air conditioner will turn off in an hour remain turned off for 2 hours then turn on automatically See page 22 for more detailed instructions on setting the Off timer To deactivate the timer combination 1 Press the Set Cancel button on the remote control Set Temp Auto LI Ic VIO O GD Lar Im QC On l a Off Timer good On Up Set Cancel sleep CD r mpizone n On Off Clean Mode Set Temp NI c Auto Auto D LAW On 3 Hr gt NT Of 18 lyr Timer good Up Set Cancel sleep CS C r mpizone Down On Off Clean Mode Both the On and Off timer will be canceled and the indicators will disappear using advanced functions _23 using aavanced functions SETTING TIMER
4. imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com global register AQV18A Series AQV24A Series Samsunga features of your new air conaitioner e Cool Summer Offer On those hot sweltering summer days and long restless nights there is no better escape from the heat than the cool comforts of home Your new air conditioner brings an end to exhausting hot summer days and lets you rest This summer beat the heat with your own air conditioner e Cost Efficient System Your new air conditioner not only provides maximum cooling power in the summer but can also be an efficient heating method in the winter with the advanced Heat pump system This technology is up to 300 more efficient than electrical heating so you can further reduce its running cost Now meet year round needs with one air conditioner e A Look for Everywhere The elegant and harmonious design gives priority to the esthetics of your space and complements any of your existing interior decor With its soft color and rounded edge shape the new air conditioner adds class to any room Enjoy what your air conditioner offers both functionally and esthetically e mpizone mpi zone generates hydrogen H and oxygen O to attack undesirable air contaminants such as bacteria pollen and odor Breathe as if you were around waterfalls ocean surf rivers a
5. away Simply set the time and your air conditioner will turn on off automatically On timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours On timer is available while your air conditioner is on off 1 Press the On button on the remote control Auto On timer indicator blinks on the remote control display HSITONA JC A L Iu Timer good Up Set Cancel Sleep 2 Set the time you want the air conditioner to turn on automatically Set Temp Auto NI l Ic Press the Up or Down button on the remote control rz to change the time setting while On timer indicator is O ao blinking You can set the time up to 24 hours increasing by 30 minute intervals up to the first 3 hours and then hourly after the first 3 hours Timer mood On Up Set Cancel sleep CAB CD mpizon On Off Clean Mod D Ji On Hr 3 Press the Set Cancel button on the remote control to activate The remote control display will show the hour s you have set The air conditioner will operate automatically at the set time and then the On timer indicator disappears If the On timer is not set within 10 seconds the air conditioner will end setting 4 Set the operating mode Press the Mode button on the remote control until the desired mode appears on the remote control display The air conditioner will operate in the mode you set
6. oa On a Set Temp AutoCoolDry KK e Temperature can also be adjusted See step 3 on page 15 for instructions e After the timer has been set and the unit is turned off all indicators will turn off except the On timer indicator and the remaining time in approximately 10 seconds e Change the timer setting by pressing the ON button pressing the Up Down button to change the time then press the Set Cancel button to activate On timer function is available in Auto Cool Dry Fan Heat mode To deactivate the On timer 1 Press the Set Cancel button on the remote control The set time will cancel and the On timer indicator will disappear using advanced functions 21 using aavanced functions SETTING TIMER Off timer This function allows you to turn off the air conditioner automatically within the time range of 24 hours Off timer is functional while the unit is in operation 1 Press the Off button on the remote control Off timer indicator blinks on the remote control display Set Temp Auto good On Up Set Cancel Sleep CI Off Down 2 Set the time you want the air conditioner to turn off automatically Set Temp Auto JIL Press the Up or Down button on the remote control to change the time setting while the Off timer indicator is Ses L blinking You can set the time up to 24 hours increasing o iti by 30 minute intervals up to the first 3 hours and then
7. Mode button the mode will change in order of Auto Cool Dry Fan and Heat 3 Set the Temperature Press the Temperature V or A button on the remote control to decrease or increase the desired temperature SetTemp Jauto You can set the desired temperature between the ae cc range of 16 C 30 C You can decrease increase the temperature by 1 C O e l4 e When the air conditioner is already operating in another mode press the Mode button until the Auto mode indicator appears on the remote control display e When using the remote control make sure the indicator matches your selection on the remote control display e Air flow can be adjusted manually See page 19 for instructions 14 operating Cool In Cool mode the air conditioner will cool your room You can adjust the temperature and the fan speed to feel cooler 1 Turn on the air conditioner Press the Power button on the remote control 2 Set the operating mode Press the Mode button on the remote control until Cool mode indicator appears on the remote control display Fa The air conditioner operates in Cool mode and Oc will lower the temperature in your room Set Temp Cool HSINONI When you press the Mode button the mode will change in order of Auto Cool Dry Fan and Heat 3 Set the temperature Press the Temperature V or A button on the remote A control to decrease or increase the desired t
8. air conditioner will not be used for an extended period of time for example over several months unplug the power from the wall Call the place of purchase or a contact center if repairs are needed e Potential risk of fire or electric shock if disassembly or repairs are attempted by a non qualified service technician If you smell burning plastic hear strange sounds or see smoke coming from the unit unplug the air conditioner immediately and call a contact center e Potential risk of fire or electric shock safety information _07 contents VIEWING YOUR AIR CONDITIONER BEFORE USE OPERATING BASIC FUNCTION 08 contents 10 10 10 11 11 11 12 13 13 13 14 14 14 15 16 D 18 19 19 19 Checking the indoor unit and digital display Main parts Indoor unit digital display Removing the front panel Power button and Room temperature sensor Checking the outdoor unit Checking the remote control Remote control display Using the remote control Installing the batteries Turning the air conditioner on and off Selecting operation mode Auto Cool Dry Fan Heat Adjusting the air flow direction Vertical air flow Horizontal air flow USING ADVANCED FUNCTIONS 20 Using the Turbo function 21 Setting the timer Pa On timer 22 Off timer 23 Combining On timer and Off timer 24 good sleep mode 26 Using the mpizone function 27 Using the Energy saving function 28 Using the Silence function 28 Using the Evaporator clean
9. filter can be placed in any of the 4 slots beneath the air filter 3 Clean the DNA filter with a vacuum cleaner or soft brush Install the DNA filter back in position 5 Reattach the front panel Insert the hooks located on the middle of the panel into the correct guide then slide it up Then push in the bottom and middle part of the panel Clean the DNA filter every 3 months The cleaning term may differ depending on usage and environmental conditions The expected life span of the DNA filter is 3 years 30_ cleaning and maintaining REPLACING THE FILTER Replacement filters may be purchased from the retail store or ordered from the dealer where you purchased the unit If you cannot find one please call a contact center Deodorizing filter The deodorizing filter efficiently absorbs cigarette smoke pet odors and other unpleasant smells Cleaning is simple just remove the old filter and install a new one 1 Remove the front panel Grab the grooved side of the front panel tightly and pull the bottom side of the panel upwards and slide it down to remove the front panel HSINONI 2 Slide the Deodorizing filter out to remove it from the slot EE B AN iii Bi nai CA 3 z B HI z Hi a
10. function HSITSNA CLEANING AND MAINTAINING 29 Cleaning the exterior THE AIR CONDITIONER 29 Cleaning the filter 29 Air filter 30 Anti allergy filter 31 Replacing the filter 31 Deodorizing filter 31 Maintaining your air conditioner APPENDIX 32 Troubleshooting 33 Operation ranges RK Correct Disposal of This Product Waste Electrical 4 Electronic Equipment Bra Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household waste at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial waste for disposal contents 09 Viewing your air conalitioner betore use Congratulations on the purchase of a Samsung air conditioner We hope you will enjoy the features of your air conditioner and stay cool or warm with optimal ef
11. minimum fan speed quietly Rapid operate at maximum fan speed to clean and purify the air effectively and quickly ened Imer good On Up Set Cancel sleep r mpizone n On Off Clean Mode The Clean Mode button will not work while the air conditioner is on IZ When you activate the mpizone function while the air conditioner is on mpizone function automatically sets to Auto To deactivate mpizone mode 1 Press the mpizone On Off button on the remote control mpizone mode shuts off 26_ using advanced functions USING THE ENERGY SAVING FUNCTION This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode 1 Press the Energy saving DA button on the remote control while the air conditioner is operating in Cool mode Cool E Saver E Saver indicator and air swing indicator appear I automatically on the remote control display The air flow blades move up and down If the current set temperature is lower than 26 C it will automatically raise the set temperature to 26 C HSITONA l r good Up Set Cancel Sleep D K e Energy saving function is only available in Cool mode e When the Energy saving function is activated the temperature range will be limited to 26 C 30C e f the desired temperature is lower than 26 C turn off the energy saving function by pressing the Energy saving DA button again e T
12. A Sa contact center EEE GES GR BA GE 32 appendix OPERATION RANGES The table below indicates the temperature and humidity ranges the air conditioner can be operated within Refer to the table for efficient use MODE OPERATING CONDITIONS IF OUT OF CONDITIONS Indoor temp 16 C 32 C A safety device will stop continuously the Indoor humidity below 8096 system functioning COOL Condensation may occur on the indoor unit Outdoor temp 10 C 43 C with risk to have either water blow off or drops on the floor HEAT Indoor temp below 27 C A safety device will stop continuously the Outdoor temp 15 C 24 C system functioning Indoor temp 16 C 32 C A safety device will stop continuously the Indoor humidity below 80 system functioning DRY Condensation may occur on the indoor unit Outdoor temp 10 C 43 C with risk to have either water blow off or drops on the floor Single phase rated voltage 220V 240V 50Hz ERS Sa minimum and maximum limit 198V min 264V max 4 Any damage occurs out of condition specified cannot be covered by product warranty If the system works continuosly outside of conditions its performace and reliability will be compromised appendix 33 HSITON3 QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT BELGIUM 0032 0 2 201 24 18 www samsung com be CZECH REPUBLIC 844 000 844 www sams
13. Auto Cool Dry Fan and Heat Set Temp 3 Set the temperature Press the Temperature V or A button on the remote control to decrease or increase the desired temperature You can set the desired temperature between the range of 18 C 30 C You can decrease increase the temperature by 1 C Set Temp ILI Auto L Ic O a 4 e When using the remote control make sure the indicator matches your selection on the remote control display e Air flow can be adjusted manually See page 19 for instructions 16 operating Fan Fan mode can be selected to ventilate your room Fan mode is helpful in refreshing the stale air in your room 1 Turn on the air conditioner Press the Power button on the remote control 2 Set the operating mode Press the Mode button on the remote control until Fan mode indicator appears on the remote control display The air conditioner operates in Fan mode and automatically adjusts the temperature according to the current room temperature Mode HSINONI K When you press the Mode button the mode will change in order of Auto Cool Dry Fan and Heat 3 Set the fan speed Press the Fan Speed button on the remote control to set the desired fan speed iY When you press the Fan Speed button fan speed will change in order of Low Medium and High IZ e When using the remote control make sure the indicator matches your selection on the remote c
14. OOTING Refer to the following chart if the air conditioner operates abnormally This may save time and unnecessary expenses PROBLEM SOLUTION The air conditioner does not operate immediately after it has been restarted e Because of the protective mechanism the appliance does not start operating immediately to keep the unit from overloading The air conditioner will start in 3 minutes The air conditioner does not work at all e Check that the power plug is properly connected Insert the power plug into the wall socket correctly e Check if the circuit breaker is switched off e Check if there is a power failure e Check your fuse Make sure it is not blown out The temperature does not change The cool warm air does not come out of the air conditioner e Check if you selected Fan mode Press the Mode button on the remote control to select another mode e Check if the set temperature is higher lower than the current temperature Press the Temperature button on the remote control to change the set temperature Press the Temperature V or A button to decrease or increase the temperature e Check if the air filter is blocked by dirt Clean the Air filter every two weeks e Check if the air conditioner has just been turned on If so wait 3 minutes The fan speed does not change e Check if you selected Auto or Dry mode The air conditioner automatically adjusts the fan soeed to Auto in Auto Dr
15. act center Installing the batteries DD 1 Slide cover down to 2 Install two AAA 3 Close the cover by open batteries sliding it back to its This is located on the back Check and match the original position of the remote control and signs accordingly You should hear a click Make sure you have sound when the cover is installed the batteries locked properly correctly viewing 13 operating basic function TURNING THE AIR CONDITIONER ON AND OFF Press the Power button on the remote control You will hear a ringing sound when the air conditioner is properly turned on Fan Speed Turning on off your air conditioner without the remote control You can operate your air conditioner by pressing the Power button on the bottom SELECTING OPERATION MODE Auto In Auto mode the air conditioner will automatically set the temperature and fan speed depending on the room temperature detected by the room temperature sensor 1 Turn on the air conditioner Press the Power button on the remote control 2 Set the operating mode Press the Mode button on the remote control until Auto mode and Auto fan speed indicator appear on the remote control display Set Temp Auto NI The air conditioner will automatically set the mz L Ic temperature and fan speed to cool or heat Mode Fan Speed O according to the current room temperature 4 When you press the
16. an be adjusted after setting good sleep in Heat mode e Temperature can be adjusted and the air conditioner automatically adjusts the Fan speed Air swing accordingly after setting good sleep in Cool mode 24 using advanced functions Temperature changes in good sleep mode To prevent excessive cooling heating during sleep the good sleep mode automatically modifies the temperature setting in accordance with the time setting Temperature and air current change according to the three stages Falling asleep Sound sleep and Waking up from good sleep mode and then the air conditioner will automatically turn off when the set time has elapsed Three stage good sleep prevents you from having difficulty sleeping on extremely hot cold nights Falling asleep Eases you into sleep by dropping the temperature Sound sleep Relaxes your body and raises your temperature slightly Waking up from good sleep mode Allows you to wake up to comfortable crisp air making you feel refreshed and energized e Set the Off timer in good sleep mode for more than 5 hours Sleep may be disturbed if the good sleep mode is set for too short or too long a time because the temperature changes are set to an 8 hour cycle e f the good sleep mode is set for less than 4 hours the operation will stop at the set time If the good sleep mode is set for over 5 hours the last hour will run in Waking Up stage before shutting off e Re
17. ay from the air conditioner Potential risk of personal injury Do not install the air conditioner in areas exposed to inflammable gas leakage or potential risk of gas leakage e Potential risk of fire hazard or explosion Do not install the outdoor unit on an unstable place such as outer high wall of an apartment or building and on an outside terrace to avoid falls e f the outdoor unit falls it may cause personal injury or loss of property Consult the place of purchase or a contact center to disassemble or reinstall the air conditioner e Potential risk of unit malfunction water leakage electric shock or fire Do not connect the air conditioner with a heating apparatus or do not attempt to disassemble remodel or repair it by yourself e Potential risk of malfunction electric shock or fire If repairs are needed consult the contact center Consult the place of purchase or a contact center to install the air conditioner e Improper installation carries a risk of unit malfunction water leakage electric shock or fire e f installing in specialty areas such as a factory complex or saline coastal area consult the place of purchase or contact center for specific installation details Install the air conditioner with the support bracket securely fastened to use for an extended period of time e f the air conditioner falls it may cause personal injury or loss of property Ensure the air conditioner is installed in compliance wit
18. cleaner or soft brush If dust is too heavy then rinse it with running water and dry it in a ventilated area e For best conditions repeat every two weeks e f the Air filter dries in a confined or humid area odors may generate If this occurs re clean and dry it in a well ventilated area 3 Insert the Air filter back into its original position cleaning and maintaining 29 cleaning and maintaining tne alr conaltioner CLEANING THE FILTER DNA filter Using the structure of DNA the DNA filter is a new technology that screens selectively only toxic agents This enables a smarter air management As Remove the front panel MI b KA i Grab the grooved side of the front panel tightly and pull the bottom side of the panel upwards and slide it down to remove the front panel Slide the DNA filter out to remove it from the slot NG Vi i l i i a R pasan Um iiti LUN wae i I The DNA
19. commended set temperature is between 25 C 27 C for cooling and 21 C 23 C for heating Cool mode Temp 2C iC Set temperature When the 8 hour cycle a completes this section 1C repeats 2C 1 2 3 4 5 6 7 8 Time hr Heat mode Temp l When the 8 hour cycle 2C ee completes this section 1C repeats Set temperature 1C 2C 1 2 3 4 5 6 7 8 Time hr To deactivate good sleep mode 1 Press the Set Cancel button on the remote control good sleep mode shuts off and the good sleep indicator will disappear using advanced functions _25 HSITSNA using aavanced functions USING THE mpizone FUNCTION MPI Micro Plasma lon zone generates hydrogen H and oxygen O2 to remove viruses and allergy causing microbes in the air by neutralizing them and turning into water Now breathe as if surrounded by waterfalls rivers trees and mountains 1 Press the mpizone On Off button on the remote control while the air conditioner off mpizone indicator will appear on the remote control display The air conditioner generates MPI in mpizone Auto 5 o mode Imer ood Up Set Cancel leep S 2 Set the operating type mpizone Rapid AutoSilence Each time you press the Clean Mode button while the 7 F air conditioner is off the operating type will change in order of Auto Silence and Rapid Auto adjusts the fan speed automatically Silence operates at
20. e Potential risk of electric shock or fire e Potential risk of damage to the air conditioner safety information _05 satety information CAUTION SIGNS Do not place containers with liquid or other objects on the unit Do not touch the pipe connected to the air conditioner e Potential risk of personal injury or burn The air conditioner is composed of moving parts Keep children away from the unit to avoid physical injury Check for damage on delivery If damaged do not install the air conditioner and call the place of purchase immediately Make sure the voltage and frequency of the electric system are compatible with the air conditioner Insert the dust filter before operating the air conditioner e f there is no dust filter inside the air conditioner accumulated dust may shorten the life of the air conditioner and cause electricity waste Keep indoor temperatures stable and not extremely cold especially where there are children elderly or disabled people Clean the air conditioner after the inner fan stops operating e Potential risk of injury or electric shock Clean the dust filter every 2 weeks Clean the filter more frequently if the air conditioner is operated in dusty areas Inspect the condition electric connections pipes and external case of the air conditioner regularly by a qualified service technician Do not open doors and windows in the room being cooled during operation unless necessary Do n
21. emperature E 17 You can set the desired temperature between rF LE the range of 16 C 30 C You can decrease increase the temperature by 1 C 4 Set the fan speed Press the Fan Speed button on the remote control to set ae the desired fan speed High If room temperature reaches the desired temperature the air conditioner will stop cooling and simply run the fan change in order of Auto Low Medium and High iY When you press the Fan Speed button fan speed will MET iY e When using the remote control make sure the indicator matches your selection on the remote control display e Air flow can be adjusted manually See page 19 for instructions e f current outside temperatures are much higher than the selected indoor temperature it may take time to bring the inner temperature to the desired coolness operating 15 operating basic function SELECTING OPERATION MODE Dry The air conditioner in Dry mode acts like a dehumidifier by removing moisture indoors Dry mode makes the air refreshing even in humid climates 1 Turn on the air conditioner Press the Power button on the remote control 2 Set the operating mode Press the Mode button on the remote control until Dry mode indicator appears on the remote control display The air conditioner operates in Dry mode and automatically adjusts the fan speed to Auto iY When you press the Mode button the mode will change in order of
22. emperature Fan speed can also be adjusted See step 3 4 on page 15 for instructions e Air flow can be adjusted manually See page 19 for instructions To deactivate the Energy saving function 1 Press the Energy saving DA button on the remote control The Energy saving function shuts off and the Energy saving indicator will disappear on the remote control display using advanced functions _27 using aavanced functions USING THE SILENCE FUNCTION This function will help you operate your air conditioner quietly while operating in Cool Heat mode 1 Press the Silence button on the remote control while the air conditioner is operating in Cool Heat mode Set Temp Cool Silence indicator appears on the remote control display The air conditioner will operate more quietly e Silence function is only available in Cool Heat mode e When the Silence function is activated pressing Mode button will automatically cancel the function e When the Silence function is activated temperature can be adjusted and the fan speed will automatically set to Auto To deactivate Silence function 1 Press the Silence button on the remote control The Silence function shuts off and the Silence indicator will disappear on the remote control display USING THE EVAPORATOR CLEAN FUNCTION The evaporator clean function keeps moisture from accumulating inside the unit This prevents mold growth and bacteria from spreading keeping yo
23. en 26 C 30 C to save energy mpizone function Timer function On Off On Off Turns the timer on off Up Down Increases Decreases the time Set Cancel Sets Cancels the current timer good sleep mode setting good sleep Turns the good sleep mode on off Emits hydrogen H and oxygen O into the air to remove harmful particles Clean Mode Sets to one of the 3 mpizone operating types IZ Each time you press a button a short beep will sound and a transmit indicator appears on the remote control display 12 viewing Remote control display Set temperature Air swing indicator indicator ea CB Operating mode a Se indicator mp1ZoNne indicator Rapid AutoSilence a cl Turbo indicator Set Temp AutoCoolDry FanHeat punocoolDry E Saver Silence AN Energy saving Silence indicator Fan speed indicator I 1 i 1 HSITONA LI ILI Ie Al indicator good sleep good R fm 1I OOL Transmit indicator indicator sleep ory I ty PB Hr Low GATE Indicator On Off Timer indicator Using the remote control e Point the remote control towards the remote control sensor of the unit e The unit will beep each time a button is pressed on the remote control iY e The remote control may not operate correctly if inverter fluorescent lighting is used in close proximity of the unit e f other electrical products operate by the remote control call your nearest cont
24. fectively by operating at the maximum fan speed for 30 minutes 1 Turn on the air conditioner Press the Power button on the remote control 2 Set the operating mode Press the Turbo runs button on the remote control until LY AutoCool HeatTurbo Turbo indicator appears on the remote control display The air conditioner operates in Turbo fan speed and automatically adjusts the temperature according to the current room temperature The unit operates for 30 minutes and then operates in the last mode used or in Auto mode if Dry Fan mode is the most recent mode used 4 Turbo function is only available in Auto Cool Heat mode If Turbo function is selected in Dry Fan mode operating mode changes to Auto To deactivate Turbo function 1 Press the Turbo 2 button on the remote control again The air conditioner operates in the last mode used or in Auto mode if Dry Fan mode is the most recent mode used Z e When using the remote control make sure the indicator matches your selection on the remote control display e Temperature Fan speed cannot be adjusted while using this function e Air flow can be adjusted manually See page 19 for instructions e When the Turbo function is activated pressing Mode button will automatically cancel the function 20 using advanced functions SETTING THE TIMER This advanced Timer function allows you to turn on off your air conditioner automatically even when you are
25. ficiency Please read the user manual to get started and to make the best use of the air conditioner CHECKING THE INDOOR UNIT AND DIGITAL DISPLAY Carefully unpack your air conditioner and check the unit to make sure it is not damaged Air intake vent Main parts Air filter Digital display Cr a ee a a i Wt E 3 n aap a Paa SAN f 7 to SON Ey 5 m O e i i oo q is Aree X a LA Maen ia a Blade pin lever Air flow blade Your air conditioner may look slightly different from the illustration shown above depending on your model Indoor unit digital display Remote control sensor Power l button Temperature indicator gaH oo Timer indicator Evaporator clean indicator good sleep indicator Operation indicator mpizone indicator 10_ viewing REMOVING THE FRONT PANEL Grab the grooved side of the front panel tightly and lift it forward slightly and then pull the front panel downward Baa taas Pa E E ee FF A a KI UU NT A Ul T 14 HSHSNA Power button and Room temperature sensor You may locate the Power button on the Digital display inside of front panel If the front panel is open you can check the room temperature sensor You can turn on the air conditioner without the remote control by pressing the Power l button The room temperature sensor measures indoor room temperature R
26. h current national safety standards Use a rated circuit breaker only e Never use steel wires or copper wires as a circuit breaker It may cause fire or unit malfunction Use an exclusive power source for the air conditioner e Potential risk of electric shock or fire Do not put undue stress on the power cable or place heavy objects on it Do not bend the power cable excessively e Potential risk of fire or electric shock 04 safety information p 5 CAUTION SIGNS If the air conditioner becomes wet turn the power off immediately and call your nearest contact center e Potential risk of fire or electric shock Install an exclusive circuit breaker and short circuit breaker for the air conditioner e Potential risk of electric shock or fire If the power cable or cord is damaged the manufacturer a qualified service technician must replace it to avoid a potential risk Disconnect the air conditioner from power supply before it is repaired or disassembled Use a receptacle that has a ground terminal The receptacle must be used exclusively for the air conditioner e Improper electrical grounding may cause electric shock or fire HSITSNA Ensure proper ground has been established when installing the air conditioner Do not connect the ground cable of the unit to a gas pipe a water pipe or a telephone line e Potential risk of electric shock N Ensure no water gets into the air conditioner e Potential ri
27. hourly after the first 3 hours NG B 3 Press the Set Cancel button on the remote control to activate The remote control display will show the hour s you have set The air conditioner will operate automatically at the set time and then the Off timer indicator disappears If the Off timer is not set within 10 seconds the air conditioner will end setting e Change the timer setting by pressing the OFF button pressing the Up Down button to change the time then press the Set Cancel button to activate e You can combine the Off timer function with the On timer function to turn on and then off the air conditioner at the desired time See page 23 for instructions To deactivate the Off timer 1 Press the Set Cancel button on the remote control The set time will cancel and the OFF timer indicator will disappear Off timer function is available in Auto Cool Dry Fan Heat mode 22 using advanced functions Combining On timer and Off timer You can combine the On timer and Off timer together for more convenient use of the timer function 1 Set the On timer Press the On button Set the time for the unit to turn on with the Up and Down button Press the Set Cancel button to activate the On timer See page 21 for more detail instructions on setting the On timer Set Temp Auto HSINONI 2 Set the Off timer Press the Off button Set the time for the unit to turn off with the Up and Down button
28. l socket Make sure the machine is grounded to prevent electric shock Call the contact center for help YY HAHHA Recommended instructions or useful information for use These warning signs are here to prevent injury to you and others Please follow them carefully After reading this section keep it in a safe place for future reference SEVERE WARNING SIGNS N Do not cut the power plug and connect to a different power cable Never attempt to lengthen the power cable e Potential risk of fire or electric shock Do not yank the power cable and touch the power plug with wet hands e Potential risk of fire or electric shock Never use a damaged power plug power cable or loosened power receptacle e Potential risk of fire or electric shock safety information 03 HSITON3 satety information SEVERE WARNING SIGNS N Do not place the air conditioner near hazardous substances or equipment that releases free flames to avoid fires explosions or injuries e Potential risk of fire hazard or explosion Do not spray flammable gases such as insecticide near the air conditioner e Potential risk of electric shock fire or unit malfunction Do not block or place items in front of the air conditioner Do not step hang onto or place heavy items on the air conditioner e Potential risk of personal injury Do not insert anything such as fingers or branches into the air conditioner vents e Keep children aw
29. nd mountains e good sleep function good sleep mode automatically adjustments room temperature to make sure you sleep comfortably while saving energy Samsung For easy future reference write the model and serial number Model down You will find your model number on the right side of Capa a the air conditioner erla 02 features satety information To prevent electric shock disconnect the power before servicing cleaning and installing the unit SAFETY INFORMATION Before using your new air conditioner please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance Because the following operating instructions cover various models the characteristics of your air conditioner may differ slightly from those described in this manual If you have questions call your nearest contact center or find help and information online at www samsung com What the icons and signs in this user manual mean A Risk of death or serious personal injury WARNING gt Potential risk of personal injury or material damage CAUTION To reduce the risk of fire explosion electric shock or personal injury when CAUTION using your air conditioner follow these basic safety instructions gt Do NOT attempt Do NOT disassemble Do NOT touch Follow directions carefully Unplug the power plug from the wal
30. oner is warming up 4 e Air flow can be adjusted manually See page 19 for instructions e Since the air conditioner heats the room by taking heat energy from outdoor air the heating capacity may decrease when outdoor temperatures are extremely low If you feel the air conditioner insufficiently heats using an additional heating appliance in combination with the air conditioner is recommended 18 operating ADJUSTING THE AIR FLOW DIRECTION Air flow can be adjusted to your desired position Vertical air flow Air flow blades move up and down 1 Press the Air swing 5 button on the remote control Air swing indicator turns on and the number of indicator lights move up and down Air flow blades move up and down continuously to circulate the air HSITONA To keep the air flow direction in a constant position press the Air swing 5 button on the remote control again Set Temp Auto INI c ma Digitalzonot Horizontal air flow Make sure none of the blade pins that stick out of the air flow blades are broken 1 Move the blade pin lever left or right to position the air flow to the prefered direction Be extremely careful while adjusting the Horizontal air flow direction caution here is a potential risk of personal injury when the unit is mishandled operating 19 using aavanced functions USING THE TURBO FUNCTION Turbo function will be helpful to cool or heat your room quickly and ef
31. ontrol display e Air flow can be adjusted manually See page 19 for instructions operating 17 operating basic function SELECTING OPERATION MODE Heat The air conditioner heats as well as cools Warm your room with this versatile appliance in the cold of winter 1 Turn on the air conditioner Press the Power button on the remote control 2 Set the operating mode Press the Mode button on the remote control until Heat Set Temp mode indicator appears on the remote control display TG cai The air conditioner operates in Heat mode and warms your room iY When you press the Mode button the mode will ar aapaw change in order of Auto Cool Dry Fan and Heat 3 Set the temperature Press the Temperature V or A button on the remote salad control to decrease or increase the desired temperature AG You can set the desired temperature between 2 the range of 16 C 30 C JO a You can decrease increase the temperature by 1 C 4 Set the fan speed Press the Fan Speed button on the remote control to set the desired fan speed When room temperature reaches the desired r temperature heating will temporarily stop co Mode Fan Speed a SN O IZ e When you press the Fan Speed button fan speed will change in order of Auto Low Medium and High e Fan may not operate for about 3 5 minutes at the beginning to prevent any cold blasts while the air conditi
32. oom temperature sensor 4 7 KAKAA m E i Ml Jl D Power l button PU CHECKING THE OUTDOOR UNIT Air intake rear side Connection valve inside Viewing 11 VIEWING your alr conalttioner before usa CHECKING THE REMOTE CONTROL Activate the air conditioner by pointing the remote control directly at the unit Remote control display Temperature V A Decreases Increases the o Power O temperature by 1C Turns the air conditioner ON and OFF Fan speed Adjusts fan speed from Auto Low Medium and High Mode Set one of the 5 operating modes See pages 14 18 for instructions OIC Fan Speed Air swing Activates Deactivates air flow blade to move automatically up and down C aif Silence Silence EX Activates Deactivates the silence insa Hom Turbo amp KI 5 CC function to operate the air Operates maximum fan speed Cat AG to cool warm quickly ASEN Evap CLEAN Dries the unit interior to get rid of odors Digital 7 On Off Turns On Off the digital display during operation The operating Te mode indicator will remain on D ran TURBO good Set Cancel sleep C r mpizone On Off Clean Mode Energy saving function DI Cools betwe
33. ot block air conditioner vents If objects block the air flow it may cause unit malfunction or poor performance The packaging material and used batteries of the remote control optional must be disposed of in accordance with the national standards The refrigerant used in the air conditioner must be treated as chemical waste Dispose the refrigerant following national standards Have a qualified service technician install the air conditioner and perform a trial operation Install the air conditioner away from direct exposure to sunlight heating apparatus and humid places e Hang curtains on windows to boost cooling efficiency and to avoid the risk of electric shock Firmly connect the drain hose to the air conditioner for proper water drainage e f it does not drain well the condensed water from the indoor unit may overflow and leak into the room Install the outdoor unit where the normal operating noise and residual vibration Subjective parameters will not disturb your neighbor and be well ventilated with no obstacle e Potential risk of malfunction 06_ safety information Install a pipe length according to minimum and maximum limit prescribed into installation manual e with length different from specified the system performance and reliability will be reduced drastically If a power outage occurs while the air conditioner is working turn off the power source immediately When cleaning the outdoor unit touch
34. sk of fire or electric shock Do not install the air conditioner close to heating appliances to avoid damage Turn off the air conditioner using the provided remote control or control accessory if provided Do not unplug to turn off the unit unless there is an immediate danger Do not open the front grille during operation e Potential risk of electric shock or unit malfunction Cool air should not flow directly towards people pets and plants e It is harmful to your health pets and plants Do not run the air conditioner for an extended period of time in a room with the door closed or with babies elderly or disabled people e In case residential application refreshing the air into the room from external air to prevent oxygen shortage in order to guarantee at least 1 2 renewal h For different application the renewal air has to be guarantee according to UNI 10339 Do not use the air conditioner as a cooling precision instrument for food pets plants cosmetics or machinery e Potential risk of property loss Do not drink water from the air conditioner e Potential risk of health hazard Do not give excessive shock to the air conditioner e Potential risk of fire or unit malfunction Do not expose the dust filter to direct sunlight while drying e Strong direct sunlight may deform the dust filter Do not spray water directly on the air conditioner or use benzene thinner or alcohol to clean the surface of the unit
35. the heat exchanger radiator fins with extreme care e Wearing thick gloves can protect your hands Make sure there are no obstacles under the indoor unit e Potential risk of fire or loss of property HSITSNA Make sure that children take precautions against access to the air conditioner and that they do not play with the unit The maximum input power amp current and the input power amp current are measured in accordance with the rules given in the IEC ISO Use the wireless remote control only up to a distance of about 7m from the remote control sensor of the air conditioner e The air conditioner may not work over the distance of 7m Make sure the cover or any obstacle is not near the air conditioner Allow sufficient space for air circulation e Insufficient ventilation may result in poor performance Batteries should be removed from the wireless remote control and kept separately when unused for a long period of time If failure or damage occurs on the conditions of improper use not followed by the installation manual the repair expense will not be covered by product warranty e Potential risk of malfunction electric shock or fire if repairs or installations are attempted by a non qualified service technician Ensure the on off and protection switches are properly installed Do not use the air conditioner if damaged If problems occur immediately stop operation and disconnect the plug from the power supply If the
36. ung com cz DENMARK 70 70 19 70 www samsung com dk FINLAND 030 6227 515 www samsung com fi FRANCE eee rabii i a www samsung com fr GERMANY 01805 121213 0 14 Min www samsung de HUNGARY 06 80 SAMSUNG 726 7864 www samsung com hu ITALIA 800 SAMSUNG 726 7864 www samsung com it LUXEMBURG 0035 0 2 261 03 710 www samsung com be NETHERLANDS 0900 20 200 88 O 10 Min www samsung com nl NORWAY 815 56 480 www samsung com no POLAND aaya a www samsung com pl PORTUGAL 80 8 200 128 www samsung com pt SLOVAKIA 0800 SAMSUNG 726 7864 www samsung com sk SPAIN 902 1011 30 www samsung com es SWEDEN 0771 400 200 www samsung com se U K 0870 SAMSUNG 726 7864 www samsung com uk REPUBLIC OF IRELAND 0818 717 100 www samsung com ie AUSTRIA 0800 SAMSUNG 726 7864 www samsung com at SWITZERLAND 0800 SAMSUNG 726 7864 www samsung com ch PO POPO DBISB 28608A 2
37. ur family healthier 1 Press the Evap CLEAN J button gt When the air conditioner is turned off The indicator on the indoor unit display appears and the Auto cleaning function starts gt When the air conditioner is turned on The indicator on the indoor unit display appears and the Auto cleaning function starts after the air conditioner stops operation Evaporator Cleaning time can vary depending on the previously used mode Auto cool Cool Dry mode approximately 30 minutes Auto heat Heat Fan mode approximately 15 minutes The Evaporator Clean function only operates after the air conditioner stops running Set Temp Auto MI L Ic 28 using advanced functions cleaning and maintaining tne alr conditioner CLEANING THE EXTERIOR 1 Wipe the surface of the unit with a slightly wet or dry cloth when needed HSITSNA Do not use Benzene Thinner or Clorox caution Mey may damage the surface of the air cleaner and can create a risk of fire CLEANING THE FILTER When cleaning the filter make sure to unplug the power from the unit No special tools are needed to clean it Air filter This air filter captures large particles in the air The filter can be cleaned with a vacuum or by hand 1 Grab the handle lift it up slightly Then pull the Air filter towards you and slide it down 2 Clean the Air filter with a vacuum
38. y mode Timer function does not set e Check if you pressed the Set Cancel button on the remote control after you have set the time Odors permeate in the room during operation e Check if the appliance is running in a smoky area or if there is a smell entering from outside Operate the air conditioner in Fan mode or open the windows to air out the room The air conditioner makes a bubbling sound Water is dripping from the air flow blades e A bubbling sound may be heard when the refrigerant is circulating through the compressor Let the air conditioner operate in a selected mode e Check if the air conditioner has been cooling for an extended period of time with the air flow blades pointed downwards Condensation may generate due to the difference in temperature Remote control is not working e Check if your batteries are depleted e Make sure batteries are correctly installed e Make sure nothing is blocking your remote control sensor e Check that there are no strong lighting apparatuses near the air conditioner Strong light which comes from fluorescent bulbs or neon signs may interrupt the electric waves SYMPTOMS CHECK ERROR MODE DISPLAYED MANAGEMENT The abnormal signal is displayed Some signal is displayed on the window LED like EHH GEN GHGS GREG BAE This product has something BIGA BAGA All blink BE GE BAGA wrong please call the nearest HG GES HA EES EE BIG
Download Pdf Manuals
Related Search
Related Contents
PCR clean-up Gel extraction User manual User Manual Le domaine public, n°53, avr.06 Observation Tool User Manual - Instituto de Astrofísica de Andalucía Manual - Besøg masterpiece.dk Copyright © All rights reserved.
Failed to retrieve file