Samsung Z-830M User Manual
Contents
1. 11 DISC VIEW FUNCTION 13 REPEAT FUNCTION 00 0 0 14 PROGRAM FUNCTION 15 ZOOM FUNCTION 16 e Do i damage i ea to the power SEARCHING FUNCTIONS 17 cord may cause a fire or shock hazard e When la the power cord please hold by the E Serres plug and remove it carefully in standby mode TROUBLE SHOOTING 21 e When you finish operating the unit always turn off the WHEN VIDEO IS DISPLAYED THROUGH SET 22 power Leaving a disc loaded for a long time with power GENERAL INFORMATION ABOUT THE DISC 22 turned on may damage the disc CARE OF PLAYER AND DISCS 22 e When you insert the disc please do not insert over SPECIFICATIONS aisn ae 23 another disc e This product should not be used in business applications WHEN MOISTURE CONDENSATION GETS IN THE UNIT e When the unit is moved from a cold area to a warm area suddenly moisture may condense on the mechanical parts which restricts the laser signal from normal operation e f this occurs leave the unit with the power turned on for 1 2 hours without a disc SAFETY INSTRUCTIONS READ INSTRUCTIONS e All the safety and operating instructions should be read before the appliance is operat2. eo OWNER S INSTRUCTIONS Z 810M 820M 830M VIDEO CD CD CD R CD RW MP3 DISC PLAYER Before operating the unit please read this manual thoroughly and retain for future reference Z 810M ES Ce bod This player does not apply to business use and CD ROM CD graphic discs cannot be played with this player Even though the MP3 disc that you purchased contains the MP3 mark on its cover the disc not written data by the format of MPEG1 LAYER3 file extension name MP3 can not be played back normally SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE TOP COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL DANGER This symbol is intended to alert you to the presence of dangerous voltage within the product CAUTION This symbol is intended to alert you to the presence of Important instruction accompanying the product WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture Enter information here for future reference Date of Purchased Model No Serial No Selling Dealer Dealer Address Dealer Phone No CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedure
3. Audio Max 74min Single Digital Video and Audio Max 74min Single CARE OF PLAYER AND DISCS ij SPECIFICATIONS Cleani ng the Play er GENERAL Power consumption 8W Use soft cloth or the dusty attachment of your vacuum SPECIFICATIONS Weight 3 7 kg cleaner to dust the exposed surface of the player Dimensions 420 W x334 D x 111 H mm Use the vacuum cleaner attachment to remove dust from Operating temperature 5 C 5 C 41 F 95F the ventilation holes on the top back sides and bottom of the cabinet USABLE Media NTSC PAL Some of plastic surfaces are easily scratched and they can be marred by alcohol and various solvents Dem Avoid excessive use of oil based furniture polishes since D 7 the materials used in the cabinet are non porous and the 8cm residue will accumulate more dust veo im h in single Video Format that can be played back MPEG1 LAYER3 12Cm single Sampling frequency 44 1KHz CARE OF DISC File extension name MP3 VIDEO OUTPUT OUTPUT Output level 1Vp p for 75 ohm load Ichannel AUDIO OUTPUT 2 Channels L R Output level 2 Vrms 1KHz 0 dB Output level 0 5 Vrms 1KHz 0 dB Audio characteristics frequency response 20Hz 20KHz Signal to Noise 85dB total harmonic distortion 0 1 at 1KHz 0dB Handling Discs When loading or removing discs do not touch the play ing surface DO NOT PLAY CRACKED OR WARPED DISCS Never play cracked sc
4. CABLE OWNER S INSTRUCTIONS REMOTE CONTROL OO OOOO 7 8 9 10 0 PROGRAM SOUND REHEAT SLOW ae ae ae PALINTSC DISC CHANGE DISC VIEW 10 11 ZOOM an yr et 12 TO INSERT BATTERIES 1 Open the battery compartment cover a STANDBY ON button NJ DIGIT buttons 3 PROGRAM button 4 SOUND Selector button 5 DISC CHANGE button 6 SELECT PLAY PAUSE button 7 STOP RETURN button 8 REPEAT PAL NTSC button 9 SLOW button 10 DISC VIEW ZOOM button 11 TIME SEARCH LAST MEMORY button 12 PREVIOUS NEXT SKIP button Install two AAA batteries 3 Replace the cover observing the correct polarity as shown in compartment SYSTEM CONNECTIONS VCD AND CDP TV 1 Connect AUDIO OUT2 jack of the VCD and CDP to AUDIO IN jack of the TV 2 Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV VIDEO OUT co 0 uk ANT VIDEO CABLE AUDIO CABLE TO AUDIO IN CCL Jm CL I TO VIDEO IN A RF CABLE RF OUT VCD AND CDP TV AMPLIFIER 1 Connect VIDEO OUT jack of the VCD and CDP to VIDEO IN jack of the TV 2 Connect AUDIO OUT jack of the VCD and CDP to the AUX or CD INPUT jacks of the AMPLIFIER SET REAR VIDEO CABLE s AUDIO CABLE TO VIDEO IN i i TO AUX OR CD IN AMPLIFIER MP3 DISC PLAYBACK This is a player that enables the playback of VCD audio CD CD R and CD RW and MP3 CD and
5. above press the i lt lt gt gt pil m Key to scroll the screen to the left right up or down While in the 4 x ZOOM Press the DISC VIEW ZOOM button for 1 sec or longer and display normal picture 16 Sooo DISC VIEW DISC VIEW ZOOM ZOOM oo DISC VIEW ZOOM SEARCHING FUNCTIONS e Turn on the TV e Load and play the disc HIGH SPEED SEARCH e This function is used to searching disc for desired location Press and hold down the Search button during the play e Hold down the Previous Next button on the front panel more than one second For example SET To play normally e When the pressed button is released it returns to the normal play SKIP Press the Previous Next I lt gt I buttons e Press the Previous Next lt 4 gt gt button on the front panel repeatedly within one second e When the Previous Next button is pressed it quickly advances to the Previous Next Track e When the me button is pressed it returns to the beginning of the currently playing track If pressed again it returns to the previous track e Picture moves to the beginning of the next track whenever bbI button is pressed e When the Previous or Next button is pressed while playing a disc such as a movie disc it quickly advances 5 minutes in the forward reverse direction NOTE In case of high speed search e When searching a CD disc the volu
6. disc characteristics damage or stain on them or if the player s lens is dirty CD RWs may require a longer readout time This is caused by the fact that the reflectance of CD RWs is lower than for regular CDs DISC VIEW FUNCTION e Desired music or video display can be used directly without by menu functions VER 2 0 Mode This function is possible in Ver 1 1 and Ver 2 0 menu off mode TRACK VIEW e This function is performed in the STOP mode e This function is used for show the first views by nine in track ex VCD 1 1 Version 1 Press the DISC VIEW button e Nine tracks are presented with sound Track View eThe selected track is displayed on the small screen with sound played EX When selecting No 4 2 Press the DIGIT button to select Press the SELECT PLAY PAUSE 3 button e Displayed in full screen In case of cancelling the TRACK VIEW function Repress the DISC VIEW button elf playbacks as original case DISC VIEW ZOOM In case the number of tracks is more than ten ePress the NEXT button watching the track bellow Press the PREVIOUS button watching the former track EX If the disc has 14 tracks or o2 os gt wer gt 40 Lar 12 lt PREVIOUS lt The first nine tracks are shown Next track is shown When pressing the DIGIT button 10 yy The 11th track is displayed on the small screen v When pressing the select play pause button it s disp
7. microphone faces Move the microphone away from the speaker 20 TROUBLE SHOOTING SYMPTOM CHECK AND ACTION Tray is not ejected Check if the power is turned on The unit does not play Check if a disc is loaded Tray is ejected Check if a disc is contaminated or damaged Remove disc clean it and insert again Check if a disc is seated properly Video or audio is muted or tray Check for condensation in unit is ejected after 2 5 seconds Removed disc leave the unit with the power turned on for 1 2 hours The unit will operate only after the condensation is cleared Picture appears late when Repeated pressing of PLAY STOP OPEN caused disc SELECT PLAY PAUSE button is pressed drive motor to over heat and protection circuit activated until motor cools down Does not have video although Check if TV power is turned on disc is tumed Check if connection is secure Check if the unit is bypassed Picture shakes vertically Picture may shakes momentarily during transition from dark to bright Picture quality of a particular disc Check if disc is damaged or deformed is poor and picture shakes Check if disc is contaminated SKIP or SEARCH takes too Some discs may require longer time to read encoded much time information Check disc TIME SEARCH searches Check if disc is contaminated or deformed different time When picture shakes disc may be contaminated or deformed causing malfunction Clean disc After p
8. only from the type of power source indicated on the marking label If you are not sure of the type of supply to your home consult your appli ance dealer or local power company For video products intended to be operated from battery power or other sources refer to the operating instructions POWER LINES e An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal POLARIZATION e This video product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power out let only one way This is a Safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electri cian to replace your obsolete outlet Do not defeat the Safety purpose of the polarized plug OUTDOOR ANTENNA GROUNDING e f an outside antenna is connected to the antenna terminal be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges e In the U S A section 810 of the National Electrical Code ANSI NFPA No 70 1984 provides information with respect to proper gro
9. ON e This function can program up to 30 tracks during STOP mode ex To program No 4 track of No 2 disc 1 Press the PROGRAM button DISC CHANGE button 2 Select the disc by pressing the e Press the DISC CHANGE button Press the track number to be programmed e Press the digit buttons Ex Select track 4 In a second eAfter step 3 you must press the PROGRAM button again then the selected number 2 04 iS programmed Up to 30 tracks can be programmed by repeating step 2 to 4 2O00 PROGRAM PROGRAM C P 02 D2 000 Press the PLAY PAUSE button e Programming is completed and the first track of the program is played e When the PREVIOUS NEXT button is pressed the next or previous programmed track is played O C g oooo Q O Ji Ka ees VI PROGRAM No Disc No PROGRA P 01 D1 000 Track No NOTE e f the PROGRAM button is pressed during programming it can not be programmed anymore press again to continue eTo escape program function Press the OPEN CLOSE button or press the STOP button two times 15 ZOOM FUNCTION This function works only in the VCD play mode Press the DISC VIEW ZOOM key for 1 sec or longer to change the screen to 2 x ZOOM While in the 2 x ZOOM screen press the DISC VIEW ZOOM key for 1 sec or longer again to change the screen to 4 x ZOOM While in the stage of No 1 or No 2
10. UNCTION e Turn on the TV e Load and play a disc 1 Connect the MIC eThe key control will be displayed on the screen KEY 4 Load a disc and select a desired track eEject the tray by pressing the Open Close button load a disc and close the tray Use the microphone e Two microphones can be used at the same time For example KEY CONTROL FUNCTION e Make sure to be at the karaoke mode Press the Key Control button e Press the Key Control button to adjust the key to suit to your voice the 15 step key control KEY 4 ex In case of pressing KEY 1 On screen Display will disappear in 3 seconds ex In case of pressing once more KEY 2 NOTE e Depending on a type of VIDEO CD 2 0 disc it may be not Operated Key Control function in still picture e This function is operated only on VCD Mode 19 KARAOKE FUNCTION Adjust the Digital Echo To decrease or increase the volume This will add an echo to your voice of the Mic rophone giving you the feeling of singing on stage Adjust it as desired e Turning to the left decreases Mic Vol Turning to the right increases Mic Vol For example Seooas LD TT 0090 For example Digital Echo Mic Vol To decrease To increase echo effect echo effect e Min Max d Min Max SET SET If howling occurs Reduce the microphone volume Change the direction that the
11. does not possess the function that saves MP3 files HOW TO PLAYBACK MP3 DISC directly After inserting MP3 i 1 Disc in the Set Press or the select button or Number button after Reading oe O You can see the information of Disc on the TV TOTAL 150 PAGE 003 030 0 02 39 lt q gt gt 016 PBAY DI 017 DON T FOR DI Track No Song name d 1 MP3 File display Select the Number button for Track No and Press the Select button 7 tracks are displayed on the PAL TV screen every time 5 tracks are displayed on the NTSC TV screen every time NOTE eSong names are marked by only English and digits But u n unsupported Data are marked by _ WHAT IS MP3 MP3 stands for MPEG 1 layer 3 It is an efficient way to store high quality music or other audio content on your computer MP3 files can be 1 4 to 1 20 the size of a commercial CD audio file yet retain a high sound quality MP3 files usually have the extension mp3 and can be downloaded from the Internet or can be legally made for personal use from your favorite CDs that you purchased 10 HOW TO PLAYBACK MP3 DISC on MENU MODE Disc in the Set Press the DISC VIEW button DISC VIEW 1 After inserting MP3 ZOOM You can see the following 2 information of Disc on the TV TOTAL 150 PAGE 001 003 000 0 00 00 gt gt I DIRECTORY NAME ABC KBG CDEG123 Directory No Directory name Select the Number o
12. ed RETAIN INSTRUCTIONS e The safety and operating instructions should be retained for future reference HEED WARNINGS e All warnings on the appliance and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS e All operating and use instructions should be followed WATER AND MOISTURE e Do not use this video product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a Swimming pool and the like OVERLOADING e Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock VENTILATION e Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video prod uct and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the video product on a bed sofa rug or other similar surface This video product should never be placed near or over a radiator or heat register This video product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been followed POWER CORD PROTECTION e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from t
13. en the video product exhibits a distinct change in performance this indicates a need for service ELECTRIC GROUNDING CONDUCTORS SERVICE NEC SECTION 810 21 EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H SERVICING e Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards e Refer all servicing to qualified service personnel REPLACEMENT PARTS e When replacement parts are required be sure the service technician has used replacement parts Specified by the manufacturer or having the same charac teristics as the original part Unauthorized Substitutions may result in fire electric shock or other haz ards CONTROLS AND COMPONENTS FRONT PANEL Gee a LL Ll EE 1 Disc Change button 8 Return Stop button 2 Key Control p button 9 Previous Next buttons 3 Key Control button 10 Disc Tray 4 Repeat button 11 Open Close button 5 Sound button 12 Mic jacks 6 Standby On button 13 Mic Volume knob 7 Select Play Pause button 14 Digital Echo Volume knob CONTROLS AND COMPONENTS REAR PANEL 1 VIDEO OUTPUT 2 AUDIO OUTPUT AMP Connect to the VIDEO IN of your TV set Connect to the AUDIO IN of your STEREO AMPLIFIER 3 AUDIO OUTPUT TV Connect to the AUDIO IN of your TV set ACCESSORIES REMOTE CONTROL VIDEO CABLE AUDIO
14. eration Press the SELECT PLAY PAUSE button NTSC PAL SELECTION METHOD Press the PAL NTSC REPEAT button for 1 sec or longer on STOP Mode You can matching the picture display on your TV REPEAT PAL NTSC DISC CHANGE FUNCTION To replace disc during the play e Press the Return STOP button e Eject the tray by pressing the Open Close button e Press the DISC CHANGE button to rotate the tray To load additional disc e Eject the tray by pressing the Open Close button It plays continuously even though the tray is ejected e When the tray is ejected while playing a disc the tray does not rotate Therefore only up to two discs can be loaded 12 SELECT SOUND TO YOUR PREFERENCE PREPARATION 1 Press the STANDBY ON button The audio Is set to the stereo mode automatically 2 Insert a disc and press the PLAY button Press the SOUND Selector button Every time you press this button sound changes as show below SOUND REM OTE CONTROL Audio Output Screen on your TV monitor R ch When playing a CD R or CD RW User edited CD Rs Recordable and CD RWs Rewritable can be played back only if they are already finalized You can play back your original CD Rs or CD RWs recorded in music CD format However they may not be played back depending on their characteristics or recording conditions Some CD Rs or CD RWs may not be played back on this unit because of their
15. f Directory You can see the following Display MP3 TOTAL 150 PAGE 001 004 TR 000 O 00 00 DIRECTORY NAME Pp 1 DIRECTORY NAME I 2 ABC DI 3 KBG wi 4 CDEG123 W Select the No of song and you can enjoy the Music TO RETURN TO THE PREVIOUS MENU Press the RETURN button eWhen a wrong menu is selected or other menu is about to be selected hold down the RETURN button more than one second be stopped e When you want to stop playing press the RETURN button short VIDEO CD PLAYBACK HOW TO PLAYBACK VIDEO CD version 2 0 e Turn on the STANDBY ON button 1 Press the Open Close button eThe tray is ejected Insert a VIDEO CD disc and press the Open Close button e Press the DISC CHANGE button for tray No selection 3 Press the SELECT PLAY PAUSE button ein version 1 1 disc menu is not displayed and play function is operated e Only in version 2 0 disc menu is displayed e f you press directly the digit key at STOP MODE start to play the track of selected digit No without menu picture PBC OFF MENU OFF MODE Ex When playing a VIDEO CD version 2 0 disc Main menu 1 The collection of videos 2 Videorche 3 Music video 4 Movie 5 High definition static image Select a number from the menu and press it Ex In the case of selecting No 1 the collection of videos 1 Prologue 2 Beauty of Korea 3 Beautiful landscape of the South Pacific Ocean 4 A woman s day Select a
16. he appliance CLEANING e Unplug this video product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning LIGHTNING e For added protection of this video product receiver during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the video product due to lightning and power line surges OB ECT AND LIQUID ENTRY e Never push objects of any kind into this product through Openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the video product ACCESSORIES e Do not place this video product on an unstable cart stand tripod bracket or table The video product may fall caus ing serious injury to a child or adult and serious damage to the appliance Use only with a cart stand tripod bracket or table recom mended by the manufacturer or sold with the video prod uct Any mounting of the appliance should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer CART e An appliance and cart combination should be moved with care Quick stops excessive force and uneven Surfaces may cause the appliance and cart combination to overturn POWER SOURCES e This video product should be operated
17. layed in full screen 13 DISC VIEW FUNCTION REPEAT FUNCTION INDEX VIEW eThis function acts as displaying the track in playing sequently by time and so it s convenient for searching desired video ex VCD 1 1 Version 1 Press the PLAY button to playback eThe display as dividing into nine equal parts Press the DISC VIEW button in displayed together with relevant sound the desired part number e t s displayed from the selected part in full screen 3 Press the DIGIT button to play back 14 e Turn on the TV e Load and play a disc 1 TO REPEAT ONE TRACK Press the REPEAT button e REPEAT indicating the one track repeat lights and the one track is played repeatedly FA O OOo 0000 a a PAL NTSC REPEAT Noer TO REPEAT ONE DISC Press the REPEAT button again e REPEAT indicating the one disc repeat lights and the one disc is played repeatedly o o x REPEAT Face C Kani PALINTSC REPEAT LJ TO REPEAT ALL DISCS Press the Repeat button three times e REPEAT indicating the all discs repeat lights and all of the discs are played repeatedly ieee REPEAT ALLDISC CO REPEAT PAL NTSC p TO END REPEAT PLAY Press the Repeat button at the all discs repeat mode e REPEAT indicator will be turned amp E 0 2 oc C PAL NTSC off and it becomes all discs continuous play mode WAS WSZ J Sy PROGRAM FUNCTI
18. me is lowered and it advances in high speed e f the search does not operate properly due to the noise release the button momentarily and press it again e When the search for a VIDEO CD is released mosaic screen might appear or the screen might advance slower than the audio for a short period of time e f you choose SCAN in the middle of playing back your MP3 disc SOUND is not played 17 SEARCHING FUNCTIONS TIME SEARCH 1 Press the TIME button Enter the time by pressing the DIGIT button 1 2 3 4 NOTE 1 If entering the time is greater than total time of the disc it will not be entered 2 If entering the time is greater than track time it will play next track 3 This function works only for playing mode 4 This function can operate only for Menu off mode of VIDEO CD 18 LAST MEMORY FUNCTION If you press the STOP or STANDBY ON button during VIDEO CD playback a play back position slightly ahead of the current time or track is stored in the unit s memo ry You can easily find the memorized position or track just press the TIME SEARCH button When you press the STOP or STANDBY ON button to finish the operation Press TIME SEARCH button and this unit will search for original position NOTE 1 Last memory play is always operated as menu off mode even if last status is menu on 2 If you press stop and open this function will be cancelled KARAOKE F
19. number from the menu and press it Ex When selecting No 4 A woman s day TO RETURN TO THE PREVIOUS MENU Press the RETURN button eWhen a wrong menu is selected or other menu is about to be selected hold down the RETURN button more than one second When the RETURN button is pressed shortly in VIDEO CD version 2 0 the disc may be stopped eWhen you want to stop playing at the VIDEO CD version 2 0 menu on mode press the RETURN button short Press the NEXT button the next menu will be displayed Press the PREVIOUS button the previous menu will be displayed E GE NOTE In the case of menu mode e PROGRAM TIME SEARCH REPEAT DISC VIEW functions do not work How to select a song or a video without using menu function e Select a track number from the disc jacket and press it at the stop mode eWhen playing version 2 0 disc which has no MENU screen If no play or no picture Press SELECT button or NEXT button to see MENU screen or the next screen 11 SLOW MOTION Press the SLOW button on the remote control when the play function is on Voices do not come out when the SLOW button is pressed Slow playing is 1 2 of the normal playing speed at 1st press Slow playing is 1 4 of the normal playing speed at 2nd press Slow playing is 1 8 of the normal playing speed at 3rd press Slow playing is canceled at 4th press The sound is muted during the slow playing To return to normal op
20. ratched or warped disc This may damage the player cause it to malfunction 23 In case the need for Servicing arises Don t hesitate to call any nearby AS center with your name address and telephone number when anything wrong with your product occurs ELECTRONICS AH68 10331T
21. ressing the SELECT PLAY PAUSE If the PLAY STOP OPEN DISC CHANGE operations are repeated within short button there is a long delay before period of time the Disc Drive Motor overheats The disc will not rotate until picture appears on screen the motor cools down This is a normal condition Wait a few minutes for the motor to cool down The disc rotates well but you do not Check if the TV power is turn ON have picture on the screen You can see Check if the connection is good the picture on screen but the quality is Check if the disc is in good condition poor and the picture shakes Check if disc is loaded upside down Insert disc with label side up Check if disc is severely deformed Clean the disc 21 WHEN VIDEO I DISPLAYED THROUGH SET fi CARE OF PLAYER AND DISCS Source VIDEO CD DISC CARE OF DISCS Display TV monitor SET MODE TV SYSTEM O ose DISPLAY REMARK PAL Color or sync is in trouble according to TV set GENERAL INFORMATION ABOUT THE DISC NTSC PAL Use a soft dry cloth for cleaning ul tee Clean the disc with water diluted with neutral detergent solution and wipe from inside to outside using dry cloth GENERAL INFORMATION ABOUT THE DISC Store a disc away from direct sunlight or heat source Compact Disc 8cm 3 inch Compact Disc CD 12cm 5 inch Video Compact Disc VCD 12 5 inch 22 cm Digital Audio Max 20 min Single Digital
22. s other than those specified herein may result in hazardous radiation CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCK DEFEATED AVOID EXPOSURE TO BEAM SPECIAL NOTICE Warning e This unit contains no user serviceable parts Never remove covers unless qualified to do so This unit contains dangerous voltages always remove main plug from the socket before any service operation and when not in use for a long period Important e This unit is designed for your enjoyment in your home We cannot be liable for the quality of the unit if you use it for commercial use So please do not use this unit for commercial use IMPORTANT NOTICE NOTE TO CATV SYSTEM INSTALLER e This reminder is provided to call the CATV system installer s attention to article 820 40 of the NEC provides guidelines for proper the cable ground shall be connect ed to the grounding system of the building as close to the point of cable entry as practical SAFETY INSTRUCTIONS SS CONTENTS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 3 I U CONTROLS AND COMPONENTS 6 REMOTE CONTROL 8 TO INSERT BATTERIES 8 SYSTEM CONNECTIONS 9 MP3 DISC PLAY BACK 10 lt VIDEO CD PLAYBACK
23. unding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See the figure below ATTACHMENTS e Do not use attachments not recommended by the video product manufacturer as they may cause hazards ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 SAFETY CHECK e Upon completion of any service or repairs to this video product ask the service technician to perform safety checks to determine that the video product is in proper Operating condition DAMAGE REQUIRING SERVICE e Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product has been exposed to rain or water d If the video product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its nor mal operation e If the video product has been dropped or the cabinet has been damaged f Wh
Download Pdf Manuals
Related Search