Home

Samsung P2270HN User Manual

1. PROBLEMS RELATED TO INSTALLATION PC MODE The monitor screen flickers Check if the signal cable between the computer and the monitor is securely connected and tightened Refer to Connecting to a Computer PROBLEMS RELATED TO SCREEN Screen is blank and power indicator is off Ensure that the power cord is firmly connected and the LCD monitor is on Refer to Connecting to a Computer lt Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video sources Refer to Connecting to a Computer lt Not Optimum Mode message Check the maximum resolution and the frequency of the video adapter Compare these values with the data in the Preset Timing Modes Chart Picture rolls vertically Check if the signal cable is securely connected Connect it again securely Refer to Connecting to a Computer Image is not clear Picture is blurred Run Frequency lt Coarse gt and lt Fine gt tuning Turn on again after removing all accessories video extension cable etc Set resolution and frequency to the recommended ranges Picture image is unstable and vibrates Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor If not reset them referring to the current lt Information gt under the monitor menu and Preset Timing Modes The image is too ligh
2. SyncMaster P2270HN P2470HN LCD TV Monitor User Manual The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Table Of Contents MAJOR SAFETY PRECAUTIONS Before YOU Start 4 3 esc see bbe weed awe ieee LALA NERI PANA NG Care and Maintenance 0 000 eee e eee es Safety Precautions 020 e ee ee INSTALLING THE PRODUCT Package Contents 2a Installing the Stand 4 4 ees Removing the Stand 0 00 c eee ee Attaching a Wall Mount Desktop Stand 000e ee eeeee Connecting to a Computer 2 00 ee Using aS a UY oe me eee ed eens ee ee eee dee Seow eee we Connecting an HDMI cable aaa Connecting Using a DVI to HDMI Cable 00 Connecting a Component cable 002 cee eee Connecting AV Devices 00 cece eee eee Connecting to an Amplifier 00 0 c eee eee Connecting Headphones 00 cee eee eee Kensington Lock saa RENA KABALBALAN kaaa USING THE PRODUCT Plug amp Play Feature ciscsedidwede oneness heceends PNKND AASA Viewing the Control panel 000 e eee eee Remote Control 246260420065 hse eteddeteeecenet enustoese Using the Screen Adjustment Menu OSD On Screen Display Installing the Device Driver 0 000 eee eee Standard Signal Mode Table 2 0c eee
3. Only Analog TV channels can be fine tuned Color System Normally the TV can receive image and sound with good quality when in the mode lt Auto gt This mode detects the signal color system automatically In case of some signal reception with color unsatisfactory select the lt Color System gt Mode to lt PAL M gt lt PAL N gt or lt NTSC gt e lt Auto gt lt PAL M gt lt PAL N gt lt NTSC gt Using the Product 3 4 Setup ad Picture a Me Sound hanne a Setup Plug amp Play Language English Time Child Lock Change PIN Caption Melody Light Effect PIP Ha ti oft Light Leve ey gt OFT Energy 5 saving AV Color System gt Auto rTYrTY T Y YT fF a NM T F YF MENU DESCRIPTION Plug amp Play This brings up the menu items that appeared when you first plugged in the TV Language You can set the menu language DUBON The language chosen affects only the language of the OSD 3 4 Using the Product MENU DESCRIPTION Time e Clock Set Setting the clock is necessary in order to use the various timer features of the TV DUB g Y The current time will appear every time you press the INFO button If you disconnect the power cord you have to set the clock again You can set the month day year hour and minute directly by pressing the number buttons on the remote control e sSleep Timer The sleep timer automatically shuts
4. Using the Product Picture PC DVI Contrast Mag cBright Picture acklight 0 Sound Brightnes Shanoness 5 Auto Adjustment Screen awani ced settings Picture Options Reset FA The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution MENU DESCRIPTION MagicBright lt MagicBright gt is a feature providing an optimum viewing environment depending on the contents of the image you are watching Currently five different modes are available lt Entertain gt lt Internet gt P l lt Text gt lt Dynamic Contrast and lt Custom gt Each mode has its own pre configured brightness value e lt Entertain gt High Brightness For watching motion pictures such as a Blu Ray or DVD e lt Internet gt For working with a mixture of images such as texts and graphics e lt Text gt For documents or work involving heavy text e lt Dynamic Contrast gt lt Dynamic Contrast gt automatically detects the distribution of the visual signal and adjusts to create an optimum contrast e lt Custom gt Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the lt Brightness gt and lt Contrast gt by using the OSD menu A Press the TOOLS button to display the Tools menu You can also set th
5. e This may cause a battery to break or leak and may cause fire injury or contamination damage a ian Na Maintaining the Correct Posture when Using this Product e Straighten your back the screen and face the screen forwards e Keep your elbow at a right angle Take care when adjusting the angle of the product or the height of the stand e If your hand or finger is caught you may be injured e Ifthe product is tilted excessively the product may fall and this may result in injury When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing When replacing the batteries insert them with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The cus tomer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery Maintain the correct posture when using this product e Keep a distance of 45 50 cm 15 19 inches from your eyes to the screen Look down at e Maintain the correct posture when using this product e Adjust the angle of the pro
6. connect the opposite plug to the HDMI PC DVI D AUDIO IN terminal of the product Press the SOURCE button at the front of the monitor or on the remote control to select lt HDMI gt mode SAMSUNG 2 8 Installing the Product 2 9 Connecting a Component cable 1 Connect the VIDEO OUT port of the AV device DVD VCR Cable Satellite box to the COMPONENT IN Pe Pp Y input ports using a component video cable Pp Pp Y 2 Connect the audio port of the AV device DVD VCR Cable Satellite box to the COMPONENT IN R AUDIO L port of the monitor Press the SOURCE button at the front of the monitor or on the remote control to select the lt Component gt mode For an explanation of Component video consult your DVD VCR Cable Satellite box manual Installing the Product 2 9 2 10 Connecting AV Devices 1 Connect the port of the AV device DVD VCR Cable Satellite box Camcorder to the AV IN R AUDIO L port of the product 2 Connect the video output terminal of the AV device and the AV IN VIDEO of the monitor using a video cable 3 Select lt AV gt using the SOURCE button on the remote SAMSUNG The audio video cables shown here are usually included with a Camcorder If not check your local electronics store 2 10 Installing the Product 2 11 Connecting to an Amplifier Connect the DIGITAL AUDIO OUT OPTICAL terminal of your monitor to the optical input of your amplifier usin
7. face down 2 2 Installing the Product Hold the main body of the product with your hand as shown by the figure Push the assembled stand into the main body in the direction of the arrow as shown in the figure Caution Do not lift the product holding only the stand Installing the Product 2 2 2 3 Removing the Stand Before removing the stand place the product down on a flat and stable surface so that the screen faces downwards Place a soft cloth over the table to protect the product and place the product face down Hold the main body of the product with your hand as shown by the figure Pull the stand in the direction of the arrow as shown in the figure to separate it Turn the connecting screw at the bottom of the Stand base to separate it from the Stand connector Take the Stand Connector out of the Stand base by pulling it in the direction of the arrow as shown in the figure 2 3 Installing the Product 2 4 Attaching a Wall Mount Desktop Stand Attaching a Wall Mount Desktop Stand not supplied This product complies with 75 mm x 75 mm 2 95 x 2 95 inches 100 mm x 100 mm 3 94 x 3 94 inches VESA specifications e YS YS A Wall Desktop Stand Mount B Wall mount kit desktop stand not supplied Turn the product off and unplug the power cord from the wall outlet Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down Align wall moun
8. gt To adjust the level of different bandwidth frequencies If you make any changes to the lt Equalizer gt settings the sound mode is automatically switched to the lt Custom gt mode Using the Product 3 4 MENU DESCRIPTION Multi Track Sound T e lt Mono gt Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal e lt Stereo gt Choose for channels that are broadcasting in stereo e lt SAP gt Choose to listen to the Separate Audio Program which is usually a foreign language translation x Press the TOOLS button to display the Tools menu You can also set the lt Multi Track Sound gt by selecting lt Tools gt lt Multi Track Sound gt Available in Analog lt TV gt Mode Only Auto Volume CG ku 5 CJ EC Reduces the differences in volume level among channels e lt Off gt lt On gt Speaker Select PIT CIMA When you watch TV with it connecting to a Home theater turn the TV speakers off so you can listen to sound from the Home theater s external speakers e External Speaker Used to listen to the sound of the External Home Theater Speakers e TV Speaker Used to listen to the sound of the TV Speakers e lf you select External Speaker in the lt Speaker Select menu the sound settings will be limited e The volume and MUTE buttons do not operate when the lt Speaker Select is set to
9. of some signal reception with color unsatisfactory select the lt Color System gt Mode to lt PAL M3 lt PAL N gt or lt NTSC gt e lt Auto gt lt PAL M gt lt PAL N gt lt NTSC gt PIP You can use the PIP feature to simultaneously watch the TV tuner and one extemal video source This product has one built in tuner which does not allow PIP to function in the same mode J Press the TOOLS button to display the Tools menu You can also configure PIP related settings by selecting lt Tools gt lt PIP gt PIP Settings Main picture Sub picture PC DVI TV AV If you turn the TV off while watching in PIP mode and turn it on again the PIP window will disappear You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke You can activate or deactivate the PIP function e lt QOn gt lt Off gt e lt Source gt You can select a source of the sub picture SSizes s ME ma You can select a size of the sub picture If main picture is in HDMI mode lt Size gt is available lt Positionn H H You can select a position of the PIP picture In Double EE mode lt Position gt cannot be selected e lt Channel gt You can select the channel for the sub screen lt Channel gt is available when the lt Source gt is set to lt TV gt Using the Product 3 4 Input ad Source List Piclun
10. off the TV after a preset time e lt Off gt s30 min gt lt 60 min gt s90 min gt s120 min gt 2150 min gt s180 min gt A Press the TOOLS button to display the Tools menu You can also set the sleep timer by selecting lt Tools gt gt lt Sleep Timer To cancel the lt Sleep Timer gt function select lt Off gt e lt Timer1 gt lt Timer2 gt lt Timer3 gt Three different on off timer settings can be made You must set the clock first e lt On Time gt Set the lt hour gt lt minute gt lt am pm gt and lt activate inactivate gt To activate the timer with the setting you ve chosen set to Activate e lt Off Time gt Set the lt hour gt lt minute gt lt am pm gt and lt activate inactivate gt To activate the timer with the setting you ve chosen set to Activate e Repeat Select lt Once gt lt Mon Fri gt lt Everyday gt sMon Sat or sSat Sun e lt Volume gt Set the desired volume level e lt Channel gt e You can set the lt hour gt lt minute gt and channel by pressing the number buttons on the remote control e Auto Power Off When you set the timer On the television will eventually turn off if no controls are operated for 3 hours after the TV was turned on by the timer This function is only available in timer On mode and prevents overheating which may occur if a TV is on for too long time Child Lock This feature allows you to prevent una
11. on when the product works normally For information about the power saving function refer to the power saving function section of the product specifications When not using the product for a long time unplugging the power cord is recommended to minimize power consumption O Speakers Using the Product 3 2 3 3 Remote Control The performance of the remote control may be affected by a TV or other electronic device operating near the product causing a malfunction due to interference with the frequency POWER Turns the product On Off Number Buttons Press to change the channel Press to select additional chan nels digital being broadcast by the same station For example to select channel 54 3 press 54 then press and 3 VOL Press to increase or decrease the volume CH LIST It displays Channel List on the screen WU MENU Opens the on screen menu and exits from the menu or closes the adjustment menu TOOLS Use to quickly select frequently used functions UP A DOWN W LEFT lt RIGHT gt ENTER Use to select on screen menu items and change menu values 1 INFO Current picture information is dis played on the upper left corner of the screen COLOR BUTTONS Not available P SIZE Picture size selection TV Selects the TV mode directly PRE CH This button is used to return to the previous channel viewed XX MU
12. remote control e You can also use the 3 button on the TV Press the A or V button to select the language then press the L button The message lt Select Home Use when installing this TV in your home is displayed Press the lt 4 or B button to select lt Store Demo or Home Use gt then the button e We recommend setting the TV to Home Use mode for the best picture in your home environment e sStore Demo mode is only intended for use in retail environments If the unit is accidentally set to lt Store Demo mode and you want to return to Home Use Standard Press the volume button on the TV When the volume OSD is displayed press and hold the MENU button on the TV for 5 seconds The message lt Check antenna input is displayed with lt OK gt selected Press the L button Press the A or V button to select lt Air gt lt STD gt lt HRC gt or lt IRC gt then press the L button Press the L7 button to select lt Start gt The TV will begin memorizing all of the available channels e To stop the search before it has finished press the L7 button with lt Stop gt selected The Clock Set menu is displayed Press the lt 4 or B button to move to the Months lt Day gt lt Year gt Hours Minute or lt am pm gt Set the lt Month gt lt Day gt lt Year gt lt Hour gt lt Minute gt or lt am pm gt by pressing the A or V button Press the L button e You can set the mont
13. selecting lt Zoom gt mode Select Fath by pressing the lt or B button Use the A or V button to move the picture up and down After selecting ifm use the A or V button to magnify or reduce the picture size in the vertical direction e lt Wide Zoom gt Move the screen up down using the A or V button after selecting the Sil by pressing the gt or ENTER L button e After selecting Screen Fit gt in HDMI 1080i 1080p or Component 1080i 1080p mode e Select B by pressing the lt or B button Use the A V lt or B button to move the picture Press the ENTER button e Reset Press the lt or B button to select lt Reset gt then press the ENTER L button You can initialize the setting e HD High Definition 16 9 1080i 1920x1080 720p 1280x720 e Settings can be adjusted and stored for each external device you have connected to an input of the TV Input Source Picture Size TV AV Component 480i 480p 16 9 Wide Zoom Zoom 4 3 Component 1080i 1080p HDMI 720p 1080i 1080p 16 9 4 3 Wide Zoom Zoom Screen Fit Digital NR gt Digital Noise Reduction If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen e lt Off gt lt Low gt lt Medium gt lt High gt lt Auto gt 3 4 Using the Product MENU DESCRIPTION Picture Options e HDMI Black Level gt You can d
14. stand When installing the product with a wall mount About persistent images Displaying a still image for a long time may create a persistent image or stain on the screen If you do not use the product for a long time set the power saving mode or screen saver Due to technological constraints of the LCD Panel manufacturer the images generated by this product may appear either brighter or darker than normal by appr 1ppm parts per million pixel The number of sub pixels of an LCD panel by size The number of Sub Pixels Max Horizontal Resolution x Max Vertical Resolution x 3 Example If the maximum resolution is 1920 x 1080 the number of sub pixels is 1920 x 1080 x 3 6 220 800 1 2 Major Safety Precautions 1 3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Warning Failing to follow the precautions marked with this sign may result in a serious injury or even a A fatality l Failing to follow the precautions marked with this sign may result in a personal injury or property A Caution damage Meaning of Signs SO Do not perform Q Do not disassemble Q Do not touch Power Related 4b D Must be followed The power plug must be unplugged from the wall outlet Must be grounded to prevent electric shock The following images are for your reference and may differ depending on models and countries A Warning Avoid using a damaged power c
15. the Product 3 6 4 Installing the Software 4 1 Natural Color What is Natural Color This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely match the colors of printed pictures For more information refer to the online help of the software F1 KY Natural Color is provided online You can download it from the website below and install http www samsung com us consumer learningresources monitor naturalcolorexpert pop download htmil 4 1 Installing the Software 4 2 MultiScreen What is MultiScreen im MultiScreen MultiScreen enables you to partition multiple sections on the Monitor Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the MultiScreen setup program If the pop up screen for the software installation does not appear on the main screen find and double click the MultiScreen setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Complete the remaining software installation steps according to the instructions displayed on the screen e The software may not work properly if you do not restart the computer after the installation e The MultiScreen icon may not appear depending on the computer system and the product specifications e If the shortcut icon does not appear press the F5 key MultiScreen Installation Requirements The MultiScreen installation ma
16. use a soft damp cloth with a monitor exclusive cleansing agent and wipe the product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related A Warning Since a high voltage runs through the prod n uct never disassemble repair or modify the TESS product yourself a e ib e Otherwise it may result in fire or electric shock e If the product needs to be fixed contact a service center If the product generates a strange noise a Pa ap burning smell or smoke unplug the power Ass plug immediately and contact a service cen IN ter Sr e Otherwise it may result in electric shock or fire If you drop the product or the case is dam Sp amp aged turn the power off and unplug the 4 lt n L38 power cord RG 23 NM Il OP a e Otherwise it may result in fire or electric lt gt shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is danger ous e Otherwise it may result in electric shock or fire When cleaning the product disconnect the power cord and clean the product with the supplied cleaning cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquito repellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being def
17. 75 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 96 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 99 935 59 887 106 500 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 Horizontal Frequency The time taken to scan one line from the left most position to the right most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency The horizontal frequency is represented in kHz Vertical Frequency A panel must display the same picture on the screen tens of times every second so that humans can see the picture This frequency is called the vertical frequency The vertical frequency is represented in Hz Using
18. 800 7267 http www samsung com PUERTO RICO 1 800 682 3180 http www samsung com REP DOMINICA 1 800 751 2676 http www samsung com NICARAGUA 00 1800 5077267 http www samsung com MEXICO 01 800 SAMSUNG 726 7864 http www samsung com TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com VENEZUELA 0 800 100 5303 http www samsung com More Information 6 3
19. Avoid placing burning candles mosquito repellent or cigarettes on the product e Otherwise it may result in fire Avoid installing the product in a badly venti lated location such as inside a bookshelf or closet e Otherwise it may result in fire due to internal over heating Keep the plastic bags used to pack the product away from children e If children place the plastic bags over their heads they may suffocate Avoid installing the product in a location exposed to dust moisture Sauna oil smoke or water rain drops and installing it within a vehicle e This may result in electric shock or fire Make sure to use only the power cord sup plied by our company In addition do not use the power cord of another electric appliance e Otherwise it may result in electric shock or fire Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power plug to cut the power off completely You cannot cut the power off completely using only the power button on the product Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in injury e Make sure to use the specified wall mount Keep a distance of at least 10 cm 3 93 inches from the wall when installing the product for ventilation e Otherwise it may result in fire due to internal over heating Av
20. JA Your television has several setting options that allow you to control the picture quality e lt Backlight gt Adjusts the brightness of LCD back light e lt Contrast gt Adjusts the contrast level of the picture e lt Brightness gt Adjusts the brightness level of the picture e lt Sharpness gt Adjusts the edge definition of the picture e lt Color gt Adjusts color saturation of the picture e Tint G R gt Adjusts the color tint of the picture Advanced Settings CIHJA Samsung s new TVs allow you to make even more precise picture settings than previous models See below to adjust detailed picture settings lt Advanced Settings is available in Standard or Movie mode e Black Tone You can select the level on the screen to adjust the screen depth e lt Off gt lt Dark gt lt Darker gt lt Darkest gt e lt Dynamic Contrast gt You can adjust the screen contrast so that the optimal contrast is provided e lt Off gt lt Low gt lt Medium gt lt High gt e lt Gamma gt You can adjust the Primary Color Red Green Blue Intensity e lt Color Space gt lt Color Space is a color matrix composed of red green and blue colors Select your favorite lt Color Space gt to experience the most natural color e lt Auto gt lt Native gt e lt White Balance You can adjust the color temperature for more natural picture colors e lt R Offset gt lt G
21. Offset gt lt B Offset gt lt R Gain gt lt G Gain gt lt B Gain gt lt Reset gt e Flesh Tone You can emphasize the pink lt Flesh Tone in the picture Changing the adjustment value will refresh the adjusted screen e Edge Enhancement You can emphasize object boundaries in the picture e lt Off gt lt On gt Using the Product 3 4 MENU DESCRIPTION Picture Options lt Color Tone The tone of the color can be changed T CIHJA e lt Cool gt lt Normal gt lt Warm1 gt lt Warm2 gt e lt Warm1 gt or lt Warm2 gt is only activated when the picture mode is lt Movie gt e Settings can be adjusted and stored for each external device you have connected to an input of the TV lt Size gt You can switch the Size The direct button on the remote control is P SIZE button e lt 16 9 gt Adjusts the picture size to 16 9 appropriate for DVDs or wide broadcasting e lt Wide Zoom Magnify the size of the picture more than 4 3 e lt Zoom gt Magnifies the 16 9 wide picture in the vertical direction to fit the screen size e 4 35 This is the default setting for a video movie or normal broadcasting e lt Screen Fit gt Use the function to see the full image without any cutoff when HDMI 720p 1080i 1080p Component 1080i 1080p signals are input e Temporary image retention may occur when viewing a static image on the set for more than two hours e After
22. TE Press to temporarily cut off the sound A CHv Press to change channels SOURCE Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time HDMI Selects the HDMI mode directly 3 RETURN Returns to the previous menu i EXIT Exits from the menu screen SRS Selects SRS TruSurround HD mode Not Available S MODE Press to select the sound mode Using the Product Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure 2 Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Close the cover Remove the batteries and store them in a cool dry place if you won t be using the remote control for a long time If the remote control doesn t work check the following els the TV power on eAre the plus and minus ends of the batteries reversed eAre the batteries drained els there a power outage or is the power cord unplugged els there a special fluorescent light or neon sign nearby Using the Product 3 3 3 4 Using the Screen Adjustment Menu OSD On Screen Display The Screen Adjustment Menu OSD On Screen Display Structure TOP MENUS SUB MENUS Picture MagicBright Contrast Brightness Sharpne
23. UT jack of the corresponding lt Anynet gt device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding lt Anynet gt device using an HDMI cable Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre 3 4 Using the Product When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theatre not the TV Connect only one Home Theatre You can connect an lt Anynet gt device using the HDMI 1 3 cable Some HDMI cables may not support lt Anynet gt functions lt Anynet gt works when the AV device supporting lt Anynet gt is in the Standby or On status lt Anynet gt supports up to 10 AV devices in total Note that you can connect up to 3 devices of the same type Setting Up Anynet View TV Select Device Record MENU INFO Receiver Off Setup A Press the TOOLS button to display the Tools menu You can also display the lt Anynet gt menu by selecting lt Tools gt gt lt Anynet HDMI CEC gt Setup Anynet ADMI CEC Auto Turn Off Searching Conne
24. ctions Using the Product 3 4 MENU DESCRIPTION Anynet HDMI CEC To use the lt Anynet gt Function lt Anynet HDMI CEC must be set to On When the lt Anynet HDMI CEC gt function is disabled all the lt Anynet gt related operations are deactivated Auto Turn Off Setting an lt Anynet gt Device to turn Off automatically when the TV is turned off The active source on the TV remote must be set to TV to use the lt Anynet gt function If you set Auto Turn Off to Yes connected external devices are also turned off when the TV is turned off If an external device is still recording it may or may not turn off Searching Connec tions The message lt Configuring Anynet Connection gt is displayed When searching devices completes the connected devices are listed in the Anynet menu 3 4 Using the Product 3 5 Installing the Device Driver e Ifyou install the device driver you can set up the appropriate resolution and frequency for the product The device driver is included on the CD supplied with the product If the supplied drive file is corrupted please visit the Samsung Electronics website www samsung com and download the driver e The installation process may differ slightly depending on the operating system The following is for installing standard XP drivers 1 Insert the driver installation CD into the CD ROM drive 2 Click on Windows Driver 3 Se
25. duct so that light is not reflected onto the screen e Keep your elbow at a right angle and keep your arm level with the back of your hand e Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart Major Safety Precautions 2 Installing the Product 2 1 Package Contents KI e Unpack the product and check if all of the following contents have been included e Store the packaging box in case you need to move the product at a later stage CONTENTS Quick Setup Guide Product Warranty User Manual Power Cord Not available in all locations Cable Holder Batteries AAA X 2 Stand Connector Stand Base Not available in all locations Po fin Cleaning Cloth Stereo Cable D Sub Cable SOLD SEPARATELY HDMI Cable KY The cleaning cloth is supplied with black high glossy models only Installing the Product 2 2 Installing the Stand Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards Insert the Stand Connector into the Stand Base in the direction shown by the figure Check if the Stand Connector is firmly connected Turn the connecting screw at the bottom of the Stand base fully so that it is completely fixed Place a soft cloth over the table to protect the product and place the product onto the cloth
26. e lt MagicBright gt by selecting lt Tools gt gt lt MagicBright gt Contrast Brightness You can use the on screen menus to change the contrast and brightness according to personal pref Sharpness erence P e lt Contrast gt Adjusts the contrast level of the picture e lt Brightness gt Adjusts the brightness level of the picture e lt Sharpness gt Adjusts the edge definition of the picture Auto Adjustment The values of lt Fine gt lt Coarse gt and lt PC Position gt are adjusted automatically P By changing the resolution in the control panel auto function is performed Available in lt PC gt Mode Only A Press the TOOLS button to display the Tools menu You can also set the lt Auto Adjustment gt by selecting lt Tools gt gt lt Auto Adjustment gt Using the Product 3 4 MENU DESCRIPTION Screen e lt Coarse gt Removes noise such as vertical stripes lt Coarse gt adjustment may move the screen image area You may relocate it to the center using the horizontal control menu e lt Fine gt Removes noise such as horizontal stripes If the noise persists even after lt Fine gt tuning repeat it after adjusting the frequency lt Coarse gt e lt PC Position Adjusts the screen location horizontally and vertically e s mage Reset Image parameters are replaced with the factory default values Available in lt PC gt Mode Only Picture Options e lt Color Ton
27. e gt The tone of the color can be changed Available in sPC3 sDVI5 mode only e lt Cool gt SNormal lt Warm gt lt Custom gt e lt R Gain gt lt G Gain gt lt B Gain gt Adjusts the individual R G B Red Green Blue color controls e lt Size gt You can switch the Size e lt 16 9 gt lt 4 3 gt Reset Picture parameters are replaced with the factory default values e lt OK gt lt Cancel gt Picture TV AV Component HDMI 1 Mode ge Picture Backlight Contrast O sa Sound Sharones ir Color gt Tint GIR a Channel Standard Brightness 5 G 50 C R Advanced settings 7 Picture Options a TESE GG Using the Product MENU DESCRIPTION Mode ku CIR A The Monitor has three automatic picture settings lt Dynamic gt lt Standard gt and lt Movie gt that are preset at the factory You can activate either lt Dynamic gt lt Standard gt or lt Movie gt e lt Dynamic gt Selects the picture for high definition in a bright room e lt Standard gt Selects the picture for optimum display in a normal environment e lt Movie gt Selects the picture for viewing movies in a dark room x Press the TOOLS button to display the Tools menu You can also set the lt Picture Mode gt by selecting lt Tools gt gt lt Picture Mode Backlight Contrast Brightness Sharp ness Color Tint G R TICIH
28. eee eee INSTALLING THE SOFTWARE Natural COlOF 26 6 4 46 8 PRA LABADA BAG LA wee ew eS Bee eee MultiScreen 0000 ee es TROUBLESHOOTING Monitor Self Diagnosis 00 ccc eee eee Before Requesting Service aan FAO ee ted eee ANA Se es ere See UA nee eee MORE INFORMATION Specifications Xa a0 nse tee you pe ee toe ee t o te yee bowen IANG wes es Power Saving Function 0000 cece eee Contact SAMSUNG WORLDWIDE 20 cee eee eee 1 Major Safety Precautions 1 1 Before You Start Icons used in this manual ICON NAME MEANING GB Caution Indicates cases where the function may not work or the setting may be canceled Note Indicates a hint or tip to operate a function Using this Manual e Make yourself fully aware of the safety precautions before using this product e fa problem occurs refer to the Troubleshooting section Copyright Notice The contents of this manual are subject to change without prior notice for performance improvement Copyright 2009 Samsung Electronics Co Ltd All Rights Reserved The copyright of this manual is reserved by Samsung Electronics Co Ltd The contents of this manual may not be partially or in whole reproduced distributed or used in any form without the written permission of Samsung Electronics Co Ltd The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics Co Ltd Microsoft Wind
29. el V high 2 2 0 V V low S 0 8 V Maximum Pixel Clock 148 500MHz Analog Digital Power Voltage This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Dimension Width x Height x Depth Weight 536 3 x 345 2 x 66 mm 21 1 x 13 6 x 2 6 inches Without Stand 536 3 x 403 x 189 5 mm 21 1 x 15 9 x 7 5 inches With Stand 5 4 kg 11 9 Ibs 593 x 377 x 65 5 mm 23 3 x 14 8 x 2 6 inches Without Stand 593 x 445 x 189 5 mm 23 3 x 17 5x 7 5 inches With Stand 6 2 kg 13 6 Ibs VESA Mounting Interface 75mm x 75 mm 2 95 x 2 95 inches 100 mm x 100 mm 3 94 x 3 94 inches Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Class B Information Communication Equipment for Home Use This device is registered for EMC requirements for home use Class B It can be used in all areas Class B equipment emits less electromagnetic waves than Class A equipment More Information 6 1 6 2 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption If the product en
30. en This is part of the product s design and is not a defect 5 2 Troubleshooting 5 3 FAQ FAQ PLEASE TRY THE FOLLOWING How can change the frequency of the video sig nal You have to change the frequency of the graphics card For more information refer to the User Manual of the computer or the graphics card How can change the resolution Windows XP Change the resolution by selecting Control Panel Appearance and Themes Display Settings Windows ME 2000 Change the resolution by selecting Control Panel Display Settings Windows Vista Change the resolution by selecting Control Panel Appearance and Personalization Personalization Resolu tion Windows 7 Change the resolution by selecting Control Panel Person alization Display Adjust resolution For more information refer to the User Manual of the computer or the graphics card How can use the power saving function Windows XP Configure it by selecting Control Panel Appearance and Themes Display Screen Saver Setting or configure it in the BIOS Setup of the computer Windows ME 2000 Configure it by selecting Control Panel Display Screen Saver Setting or Configure it in the BIOS Setup of the computer Windows Vista Change settings by selecting Control Panel Appear ance and Personalization Personalizati
31. ere O a the operating conditions vary considerably z a serious quality problem may occur due to Ct the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity airports or stations where the product is continuously used Cleaning Related A Warning Before cleaning the product unplug the power cord e Otherwise it may result in electric shock or fire Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in e If rainwater enters the product it may result in electric shock or fire Do not place the product face down on the floor e This may damage the panel of the product When putting the product down handle it gently e Otherwise it may result in a problem with the product or injury When cleaning the product do not spray water directly over the product parts 4 D e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product Major Safety Precautions A Caution Avoid spraying cleansing agent directly onto the product e This may result in discoloration or cracking of the exterior of the product or the panel coming off If you can t get the product clean with just the supplied cloth
32. g Edit Name Anynet HDMI CEC 0 Sound hannel Setup Ps Input MENU DESCRIPTION Source List Use to select lt PC gt lt TV gt or an external input source connected to the Monitor Use to select the PITICIHIA screen of your choice You can use the SOURCE button on the remote control lt PC gt lt DVI gt lt TV gt lt AV gt lt Component gt lt HDMI gt Edit Name Name the input device connected to the input jacks to make your input source selection easier PITICIHIA lt VCR gt lt DVD gt lt Cable STB lt Satellite STB gt lt PVR STB lt AV Receiver gt lt Game lt Cam corder gt PC sDVI PC gt lt DVI gt lt TV gt lt IPTV gt lt Blu Ray gt sHD DVD gt lt DMA gt Anynet HDMI CEC lt Anynet gt is a function that enables you to control all connected Samsung devices that DUB support lt Anynett gt with your Samsung TV s remote The lt Anynet gt system can be used only with Samsung devices that have the lt Anynet gt feature To be sure your Samsung device has this feature check if there is an lt Anynet gt logo on it Anynet HDMI CEC Connecting Anynet Devices Home Theatre Anynet 1 CO kar a NG _ lt ___ Ts amp ME CECOITEET iOS HDMI 1 3 Cable Anynet 1 HDMI 1 3 Cable HOMI 1 3 Cable 1 Connect the HDMI IN jack on the TV and the HDMI O
33. g an optical cable F DIGITAL AUDIO OUT OPTICAL e f no sound is emitted from the monitor you need to use an amplifier e For information on how to connect a speaker and amplifier refer to the respective user manuals provided by their manufacturers Installing the Product 2 11 2 12 Connecting Headphones Connect your headphones to the Headphone connection terminal 2 12 Installing the Product 2 13 Kensington Lock A Kensington Lock is an anti theft device that enables users to lock the product so that they can safely use it in public locations Since the shape and usage of the locking device may differ depending on the model and the manufacturer for more information refer to the User Manual supplied with the locking device You have to purchase the locking device separately SAMSUNG n e Locking the product 1 Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking direction 2 Connect the Kensington lock cable 3 Tie the Kensington lock cable to a desk or heavy object You can purchase the locking device from an electronics store or an online shop Installing the Product 2 13 Using the Product 3 1 Plug amp Play Feature a N Soe EE When the TV is initially powered on basic settings proceed automatically and subsequently 1 Press the POWER t6 button on the
34. h day year hour and minute directly by pressing the number buttons on the remote control The message lt Enjoy your TV is displayed When you have finished press the L7 button If you want to reset this feature 1 Press the MENU button to display the menu Press the A or V button to select lt Setup gt then press the L button 2 Press the L button again to select lt Plug amp Play The lt Plug amp Play gt feature is only available in the TV mode 3 1 Using the Product 3 2 Viewing the Control panel Q e Touch one of the operating buttons lightly e The LED buttons appear ICON DESCRIPTION GB a Use this button to select a function Signals other than the TV signal can only be selected if the corresponding device is connected The order in which the TV external input signal changes lt PC gt gt lt DVI gt lt TV gt gt lt AV gt lt Component gt gt lt HDMI gt 2 MENU Press this button to view the On Screen Display OSD This button is also used to exit the OSD or to return to a higher level OSD menu 3 Moves from one menu item to another horizontally or adjusts selected menu values Adjusts the audio volume pa Y A Use these buttons to navigate the menu or to adjust a value in the OSD Press to change channels in TV mode Press this button to turn the product on or off O Power LED This LED is turned
35. he channel lists e lt Add gt lt Delete gt Using the lt Channel List gt you can add or delete channels Move to the HB field by pressing the A W lt 4 P buttons select a channel to be added and press the L button to add the channel If you press the L button again the W symbol next to the channel disappears and the channel is not added e lt Lock gt lt Unlock gt This feature allows you to prevent unauthorized users such as children from watching unsuitable programmes by muting out video and audio This function is available only when the lt Child Lock gt is set to on a e Move to the H field by pressing the A V Gb buttons select a channel to be locked and press the LF button e The PIN number input screen appears Enter your 4 digit PIN number e The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting lt Change PIN from the menu e If you press the L7 button again the iw symbol next to the channel disappears and the channel lock is canceled e A blue screen is displayed when lt Child Lock is activated Fine Tune Use fine tuning to manually adjust a particular channel for optimal reception e If you do not store the fine tuned channel in memory adjustments are not saved e lt gt will appear next to the name of fine tuned channels e To reset the fine tuning setting press the V button to select Reset then press the button
36. ion hardware or software on your computer 1 Connect the cable or TV antenna cable to the ANT IN port on the rear side of the monitor e When using an indoor antenna cable terminal Check the antenna terminal on the wall and then connect the antenna cable TV cable e When using an outdoor antenna When using an outdoor antenna we strongly suggest using a qualified technician to install it 2 When the connections are completed connect the TV power 3 When the product is turned on for the first time after it was purchased the initial setup operations lt Plug 4 Play begin KI Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal ANT IN 2 6 Installing the Product 2 7 Connecting an HDMI cable Connect the HDMI OUT port of the AV device Blu Ray DVD Cable Satellite box to the HDMI IN terminal of the monitor using the HDMI cable Press the SOURCE button at the front of the monitor or on the remote control to select lt HDMI gt mode SAMSUNG You do not need to make a separate audio connection when connecting via HDMI Installing the Product 2 7 2 8 Connecting Using a DVI to HDMI Cable 1 Connect the DVI output terminal of an external device to the HDMI IN terminal of the monitor using a DVI to HDMI cable 2 Connect the red and white plugs of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and
37. irectly select the black level on the screen to adjust the screen depth TICIHJA This function is active only when the external device is connected via lt HDMI gt The sHDMI Black Level function may not be compatible with all external devices e Normal lt Low gt e sFilm Mode The lt Film Mode feature offers you a theater quality viewing experience lt Film Mode is supported in lt TV gt lt Component gt 480i 1080i and lt HDMI gt 10801 e lt Off gt lt Auto gt Reset Picture parameters are replaced with the factory default values TICIHIA e lt OK gt lt Cancel gt Sound o Picture gt p Sound Mode Custom Equalizer Mult Track Sound Stereo Auto Volume gt Off speaker Selact TV Speaker Sound Select gt Sub MENU DESCRIPTION Mode e lt Standard gt Choose Standard for the standard factory settings P T Chay Al pie e lt Music gt Choose Music when watching music videos or concerts e lt Movie gt Choose Movie when viewing movies e lt Clear Voice gt Emphasizes voice over other sounds e lt Custom gt Choose Custom if you want to adjust the settings according to personal preference Equalizer You can adjust the left and right sound balance and equalizer settings as required PITICIHJA e sBalance L R gt You can adjust the left and right sound balance and equalizer settings as required e lt 100Hz gt s300H2 lt 1KHz gt lt 3KHz gt lt 10KHz
38. lect the model of your product from the model list m SA SP manitor metalher Select the display adapter on which you wani lo imel the manitor 4 Complete the remaining installation steps according to the instructions displayed on the screen 5 Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings For more information refer to the document about the Windows operating system Using the Product 3 5 3 6 Standard Signal Mode Table An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel unlike a CDT monitor Therefore the visual quality will be degraded if the optimal resolution is not set for the panel size It is recommended setting the resolution to the optimal resolution of the product PC Timing D Sub DVI and HDMI input If the signal from the PC is one of the following standard signal modes the screen is set automatically However if the signal from the PC is not one of the following signal modes a blank screen may be displayed or only the Power LED may be turned on Therefore configure it as follows referring to the User Manual of the graphics card 3 6 Using the Product HORIZONTAL VERTICAL CLOCK RESOLUTION FREQUENCY FREQUENCY FREQUENCY POLARITY H V KHZ HZ MHZ IBM 640 x 350 31 469 70 086 25 1
39. lt External Speaker Please set the volume on your Home theater Sound Select When the lt PIP gt feature is activated you can listen to the sound of the sub PIP picture J e lt Main gt lt Sub gt You can select this option when lt PIP gt is set to lt On gt A Press the TOOLS button to display the Tools menu You can also set the sound of the sub pic ture by selecting lt Tools gt lt PIP gt lt Sound Select Channel Eur Auto Program Channel List 0 soundi Color System a Setup 3 4 Using the Product MENU DESCRIPTION Air Cable Before your television can begin memorizing the available channels you must specify the type of sig nal source that is connected to the TV i e an Air or a Cable system STD HRC and IRC identify various types of cable TV systems Contact your local cable company to identify the type of cable system that exists in your particular area At this point the signal source has been selected e lt Air gt lt STD gt lt HRC gt lt IRC gt Auto Program The TV automatically cycles through all of the available channels and stores them in memory In rare cases lt Auto program gt may miss a few channels due to weak signals and the channels may not be added to the channel memory Channel List Using this menu you can conveniently add delete or lock unlock channels Press the CH LIST button on the remote control to bring up t
40. may differ depending on the product model When the graphics card provides a D Sub analog output e Connect the PC IN port of the product to the D Sub port of the PC with the D Sub cable When the graphics card provides a DVI digital output e Connect the DVI D IN port of the product to the DVI port of the PC with the DVI cable SAMSUNG 2 5 Installing the Product 2 Connect the HDMI PC DVI D AUDIO IN port on the rear side of the monitor to the sound card of the PC SAMSUNG 3 Connect one end of the power cord to the POWER port of the product and connect the other end of the power cord to the 110V or 220V wall outlet The input voltage is switched automatically e You may enjoy clear and quality sound from the computer sound card using the monitor s speakers You don t need to install separate speakers for your computer e You may get a blank screen depending on the type of video card you are using if you connect the D sub and DVI cables simultaneously to one computer e If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen check to see if the monitor status is set to analog Press L button to have the monitor double check the input signal source Installing the Product 2 5 2 6 Using itas a TV You may view television programs on the monitor if it is connected to an antenna or cable system without installing any separate TV recept
41. ms which are the highest quality digital TV programs using an SD digital TV At present all digital TVs from Samsung Electronics have the 16 9 wide aspect ratio Troubleshooting 5 3 FAQ PLEASE TRY THE FOLLOWING Can watch digital TV broadcasting with an ana log TV No The analog TV cannot interpret digital signals Therefore a digital TV is required to watch digital TV broadcasting Can use my present antenna to receive digital broadcasting As for existing analog TV digital TV is designed so that digital broadcast ing signals are received via both indoor and outdoor antennas If signal reception is very good in your environment you can watch digital broadcasts with your existing indoor antenna If not it is better to install an outdoor antenna 5 3 Troubleshooting 6 More Information 6 1 Specifications MODEL NAME P2270HN P2470HN LCD Panel Screen Size 21 6 inches 54 cm 24 inches 61 cm Display Area 477 504 mm H x 268 596 mm V 531 36 mm H x 298 89 mm V Pixel Pitch 0 248 mm H x 0 248 mm V 0 27675 mm H x 0 27675 mm V Synchroniza Horizontal 30 81 kHz bil Vertical 56 75 Hz Color 16 7M Resolution Optimal Reso 1920 x 1080 60 Hz lution Maximum Res olution 1920 x 1080 60 Hz Input Signal Terminated RGB analog DVI Digital Visual Interface 0 7 Vp p 5 Separate Type H V Sync Composite TTL Lev
42. oid installing the product in a location that is unstable or exposed to excessive vibra tions such as on an unstable or slanted shelf e The product may fall and this may result in damage to the product or injury e If you use the product in a location exposed to excessive vibration it may result in a problem with the product or fire Avoid installing the product in a location exposed to direct sunlight or near a heat source such as a fireplace or heater e This may shorten the product life cycle or cause fire 1 3 Major Safety Precautions Q Avoid installing the product where children S may reach it e Ifa child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surface Install the antenna far away from any high voltage cables e f the antenna touches or falls onto a high voltage cable it may result in electric shock or fire A Caution Do not let the product drop while moving it e This may result in a problem with the i kay product or injury When installing the product on a console or shelf make sure that the front of the product does not protrude out of the console or shelf e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location wh
43. on Screen Saver You can also use the BIOS SETUP menu on the PC Windows 7 Change settings by selecting Control Panel gt Personaliza tion Screen Saver You can also use the BIOS SETUP menu on the PC For more information refer to the User Manual of the computer or the graphics card How can clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft dry or slightly damp cloth Do not leave any detergent or scratches on the case Do not let any water enter the monitor What is the difference between HDTV and SDTV There are various types of digital TVs The most widely known types of digital TV are HDTV and SDTV They are classified according to the screen quality and the video specifications e HDTV High Definition TV High screen quality e SDTV Standard Definition TV Common standard digital TV An SDTV has an aspect ratio of 4 3 which is the same as that of an analog TV HDTV has an aspect ratio of 16 9 which is similar to a cinema screen This provides a much better screen quality than SDTV Digital TV broadcasting in our country is ultimately orientated towards HDTV At present all digital TVs from Samsung Electronics have the 16 9 wide aspect ratio Can watch HD broadcasting with all digital TVs You can receive all digital broadcasts whether they are SD or HD using any digital TV However you cannot enjoy HD progra
44. ord or plug or a loose power outlet e Otherwise it may result in electric shock or fire Avoid plugging in or unplugging the power Suk supply with wet hands AY e Otherwise it may result in electric shock Make sure to connect the power cord to a grounded wall outlet for insulation class 1 equipment only e Otherwise it may result in electric shock or injury Keep the power cord and the product away from a heater e Otherwise it may result in electric shock or fire Avoid connecting multiple electric appli ances to a single wall outlet e Otherwise it may result in fire due to overheating of the wall outlet Plug the power plug in firmly e Otherwise it may result in fire Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord e Otherwise it may result in electric shock or fire due to a damaged power cord If the pins of the power plug or the wall out let are covered in dust clean it using a dry cloth e Otherwise it may result in fire Major Safety Precautions A Caution Avoid unplugging the power plug while the product is operating e Otherwise it may damage the product due to electric shock When unplugging the power plug from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire Installation Related A Warning ER
45. ormed or the print being removed Since the exterior of the product is easily scratched be sure to use the supplied cleansing cloth To move the product turn the power off and unplug the power cord the antenna cable and any other wires connected to the prod uct e Otherwise it may result in electric shock or fire due to the damaged power cord Avoid letting children hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e Ifa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire 1 3 Major Safety Precautions NG oF Avoid moving the product by pulling the power cord or antenna cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or moving the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating Avoid placing a liquid con
46. ows and Windows NT are the registered trademarks of Microsoft Corporation VESA DPM and DDC are the registered trademarks of the Video Electronics Standard Association The ENERGY STAR logo is the registered trademark of the U S Environmental Protection Agency All other trademarks mentioned herein belong to their respective companies Major Safety Precautions 1 2 Care and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth A white stain may be generated on the surface of the model if a supersonic humidifier is used near it Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth This may result in a problem with the product Avoid scratching the screen with your fingernails or a sharp object Avoid cleaning the product by spraying water onto it If water enters the product it may result in fire electric shock or a problem with the product KS The appearance and the color may differ depending on models Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature Install the product so the required distances shown in the figure are kept KS The appearance may differ depending on the product When installing the product with a
47. s enter the product turn the power off unplug the power cord and contact a service center e Otherwise it may result in a problem with the product electric shock or fire When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or move the product holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product Major Safety Precautions Keep the small accessories in a location out Pe of the reach of children Avoid placing a heavy object over the prod y N F uct Rj e Otherwise it may result in a problem PUNBA with the product or injury Q Be careful that children do not place the bat teries in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e If children have had the battery in their mouths consult your doctor immediately Use only specified standard batteries Do not use new and used batteries together E a a o ow i ilang Ti
48. splay different information Field 2 carries additional information that supplements the information in Field 1 For example Channel 1 may have subtitles in English while Channel 2 has subtitles in Spanish Melody A melody sound can be set to come on when the monitor is powered On or Off PITICIHIA e lt Off gt lt Low gt lt Medium gt lt High gt Light Effect You can turn the LED on off on the front of monitor You can turn it off to save power PITICIHIA e lt Off gt Activates the lt Light Effect gt LED only when a button is pressed e sOns Activates the lt Light Effect gt LED only while watching the TV Light Level Use to adjust the light level i e the brightness of the light PITICJHJA SILO The higher the number the brighter the light of the LED emits Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption When watching TV at night set the Energy Saving mode option to High to reduce eye fatigue as well as power TICIHJA consumption J Press the TOOLS button to display the Tools menu You can also set the sleep timer by select ing lt Tools gt gt lt Energy Saving e lt Off gt lt Low gt lt Medium gt lt High lt Auto gt 3 4 Using the Product MENU DESCRIPTION AV Color System Normally the TV can receive image and sound with good quality when in the mode lt Auto gt A This mode detects the signal color system automatically In case
49. ss Auto Adjustment PC DVI Screen Picture Options Reset Picture Mode Backlight Contrast Brightness Sharpness TV AV Component Color Tint G R Advanced Set Picture Options Reset HDMI tings Sound Mode Equalizer Multi Track Auto Volume Speaker Select Sound Sound Select Channel Air Cable Auto Program Channel List Fine Tune Color System Setup Plug amp Play Language Time Child Lock Change PIN Caption Melody Light Effect Light Level Energy Saving AV Color Sys PIP tem Input Source List Edit Name Anynet HDMI CEC Available Modes The icons below represent the input signals that are displayed when selecting an item in the lt Source List gt g Indicates the signal when lt PC gt or lt DVI gt is selected in the lt Source List gt This is the PC video signal that is connected to and input through the PC or DVI terminals A Indicates the signal when lt AV gt is selected in the lt Source List gt This is the video signal input through the VIDEO terminal H Indicates the signal when lt HDMI gt is selected in the lt Source List gt This is the signal input through the HDMI terminal Indicates the signal when lt TV gt is selected in the lt Source List gt This is the signal input through the ANT IN terminal C Indicates the signal when lt Component gt is selected in the lt Source List gt This is the signal input through the COMPONENT terminal 3 4
50. t desktop stand to the Monitor TV and firmly fix the wall mount desktop stand by fastening the screw Align the groove of the part of the product that is to be connected to the stand with the groove in the stand desk top stand wall mount stand or another stand and firmly fix the stand by fastening the screw If you use screws that are longer than the standard specifications the inside of the product may be damaged For wall mounts that are not compatible with the standard VESA specifications the length of the screw may differ depending on the corresponding specifications Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force This may result in damage to the product or injury due to the product falling Samsung shall not be held liable for any damage or injury Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer When installing the product using a wall mount purchase a wall mount that provides at least 10 cm 3 93 inches of space from the wall Use the wall mount according to the international specifications Installing the Product 2 4 2 5 Connecting to a Computer 1 Connect the product to a PC depending on the video output supported by the PC The connecting part
51. t or too dark Adjust the lt Brightness gt and lt Contrast gt Refer to the lt Brightness gt lt Contrast gt Screen is blank and the power indicator light blinks every 0 5 or 1 seconds The monitor is using its power management system Press a key on the keyboard The screen is blank and is blinking If you see the TEST GOOD gt message on the screen when you press the MENU button check the cable connection between the monitor and the computer to ensure that the connector is properly connected PROBLEMS RELATED TO AUDIO No sound Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound card Refer to Connecting to a Computer Check the volume level The sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program PROBLEMS RELATED TO REMOTE CONTROL The remote control buttons do not respond Check the battery polarities Check if the batteries have been exhausted Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity Troubleshooting 5 2 NOTE ON THE PRODUCT APPEARANCE You may see small particles if you look closely at the edge of the bezel surrounding the scre
52. tainer such as a vase flowerpot beverage cosmetics or drugs or a metal object over the product e f water or substances enter the product turn the power off unplug the power cord and contact a service center e Otherwise it may result in a problem with the product electric shock or fire A Caution Displaying a still image for a long time may create a persistent image or stain on the screen e If you do not use the product for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and fre quency for the product e Otherwise it may result in eye strain Watching the product from too close a dis O tance continuously may damage your eye 97 sight ag It is important to give your eyes some rest 5 minutes every hour when viewing the prod naal uct screen for long periods of time a It b 952 L e This will alleviate any eye strain When a gas leak occurs do not touch the product or the power plug and ventilate immediately e Aspark may result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflamma ble objects into the product the vents ports etc e fwater or substance
53. ters power saving mode the power LED turns to a different color to indicate that the product is in power saving mode When the product is in power saving mode the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse However the power saving function only works when the product is connected to a computer that provides the power saving function POWER SAVING POWER OFF POWER FUNCTION NORMAL OPERATION POWER SAVING MODE BUTTON Power LED On Blinks Off Power Consumption 50 watts less than 2 watts less than 1 watts If there is no power cut off switch the power consumption is 0 only when the power cord is disconnected 6 2 More Information 6 3 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Country Customer Care Center Web Site ARGENTINE 0800 333 3733 http www samsung com BRAZIL 0800 124 421 http www samsung com 4004 0000 CHILE 800 SAMSUNG 726 7864 http www samsung com COLOMBIA 01 8000112112 http www samsung com COSTA RICA 0 800 507 7267 http www samsung com ECUADOR 1 800 10 7267 http www samsung com EL SALVADOR 800 6225 http www samsung com GUATEMALA 1 800 299 0013 http www samsung com HONDURAS 800 7919267 http www samsung com JAMAICA 1 800 234 7267 http www samsung com PANAMA
54. uthorized users such as children from watching unsuitable programme by muting out video and audio e lt Off gt lt On gt e Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number e The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting lt Change PIN from the menu e You can lock some channels in Channel List e Child Lock is available only in TV mode Using the Product 3 4 MENU DESCRIPTION Change PIN You can change your personal ID number that is required to set up the TV e Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number e The default PIN number of a new TV set is 0 0 0 0 e If you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 sPOWER Off lt MUTE gt 8 2 4 POWER On Caption e Caption lt Mode gt lt Channel gt lt Field gt On Screen Text Mes sages The Caption function operates when watching regular analog channels or when you have an analog external component such as a VCR connected TIA e The Caption feature doesn t work in lt Component gt lt PC gt or lt HDMI gt modes e Depending on the particular broadcast it might be necessary to alter the settings to lt Channel gt and lt Field gt e Different channels and fields di
55. y be affected by the graphics card motherboard and the networking environment Operating System Os e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista 32Bit e Windows 7 32Bit For MultiScreen Windows 2000 or later operating systems are recommended Hardware At least 32MB of memory At least 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove Programs Select MultiScreen from the program list and click the Add Delete button Installing the Software 4 2 5 Troubleshooting 5 1 Monitor Self Diagnosis KI e You can check if the product is working properly using the Self Diagnosis function e Ifa blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected perform the self diagnosis function according to the procedures below Turn the product and the PC off Remove the D Sub cable from the product Turn the product on a gi If the product is working properly the lt Check Signal Cable message appears In this case if a blank screen is displayed again make sure that there is no problem with the PC and the connection 5 1 Troubleshooting 5 2 Before Requesting Service Samsung Electronics Service Center Please check the following before requesting After Sales service If the problem continues please contact your nearest

Samsung P2270HN User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents