Samsung WA7534A1 User Manual
Contents
1. If the control panel for this washer is damaged it must be replaced by a repair shop appointed by the manufacturer as special purpose tools are required gt Do not operate this appliance if it is damaged malfunctioning partially disassembled or has missing or broken parts including a damaged cord or plug gt Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance gt The instructions for use shall specify the maximum mass or dry cloth in kg for which the appliance is designed gt If the appliance is supplied from a cord extension set or electrical portable outlet device the cord extension set or electrical portable outlet device should be positioned so it is not subject to splashing or ingress of moisture DESCRIPTION OF PARTS LID Be sure to keep the lid closed during washing and spinning FABRIC SOFTENER DISPENSER BLEACH INLET MAGIC FILTER Lint will be collected in the filter during washing FRONT CONTROL Option PANEL ADJUSTABLE LEGS Adjust the length of the legs when installing the washer ty a A A WA AA CS Cr AA PA N EN AN ZRN AN Dr WATER SUPPLY HOSE HOT Opisi WATER SUPPLY HOSE COLD DRAIN HOSE PUMP O pti SPIN BASKET Stainless Qption CENTER JET PULSATOR POWER CORD ptidn SOUND ABSORPTION PANEL GROUND LEAD pti6n When the water pipe is met2. gt During spinning don t put your hand in the spin basket Because the spin basket is rotating at the high speed rotating parts may injure your hand gt Openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor gt Turn off water taps when the washer is not in use to avoid water pressure damage to the pump gt To minimize the possibility of electric shock unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning gt The appliance is not intended for use by young children or infirm persons without supervision gt Young children should be supervised to ensure that they do not play with the appliance p If the power supply cord is damaged it must be replaced by the manufacturer or its service agent or a similary qualified person in order to avoid a hazard p Place clothes evenly into the washer as unevenly distributed laundry may cause excessive out of balance noise and vibration p Don t use excessively hot water Plastic parts may be deformed or damaged Also clothing may be deformed or bleached gt Before washing check all pockets If nails or pins remain in pockets they may damage the washer or clothes gt Don t press the control panel with a sharp object Panel damaged or malfunction may occur
3. Before starting washing check the following Connect the water supply hose to the water tap Leave a tap open Plug the power cord in Make sure to lay down the drain hose In case no drain pump Put the laundry into the washer and add detergent too Be careful not to overload Use right detergent for the fabrics you are washing FUZZY COU RSE Selects the best washing course automatically 1 Press the POWER Button to ON POWER 2 Press the START HOLD button Water level is selected automatically Washing rinsing and spinning follow If you want to pause press the START HOLD button again You can change the course when paused START HOLD 3 Close the lid SPEEDY COU RSE Because washing is speedy it is good for light or less stained laundry 1 Press the power button to ON POWER 2 Press the course select button twice 3 Press the START HOLD button Water level is selected automatically Washing rinsing and spinning follow If you want to pause press the START HOLD button again You can change the course when paused START HOLD Close the lid HEAVY COURSE 1 Press the power button to ON POWER 2 Press the course select button once 3 Press the START HOLD button Water level is selected automatically Washing rinsing and spinning follow If you want to pause press the START HOLD button again You can change the course when paused START HOLD 4 Close the lid Ext
4. Softener Dispenser for a long time Z Because softner became stiff f cap Pour it slowly HOW TO CLEAN THE FILTER Option HOW TO PUT THE DETERGENT IN 1 Place a rag under the washer filter not to wet the floor 1 Open the detergent box by pulling in the 2 Rotate the filter counterclockwise and pull out the filter direction of the arrow as shown in the 3 Remove dirts and rotate the filter clockwise SOUE NEE pU E power Cererem in the detergent box 2 Put in one time amount until it locks in position N FILTER of detergent evenly so the detergent may OPEN S CLOSE mar not brim over the box HOW TO ASSEMBLE THE LEGS Option 1 Check the 4 Legs Front right Front left Rear right Rear left 2 Lay down the Washing Machine to the front 3 Insert the hook of leg into the square hole of base 4 Push the leg to the arrow direction to click 5 Finally fix the legs on the base with screw like a figure TROUBLESHOOTING Washing machine won t work Water dose not drain Is the water tap opened A Is the drain hose down No pump Is the washer plugged in Is the drain hose frozen Is the power cut off Is the drain hose clogged If the water dose not drain in 6 minutes a buzzer will sound and the remaining time indicator will show E Is there enough water Water is not supplied Is the water tap opened Spinning does not work eae Is the laundry spread out even Is the water
5. is automatically connected to the adaptor making a click sound 5 Connect the other end of the water supply hose to the inlet water valve at the back of the washer Screw the hose clockwise all the way in If the water tap is a screw type assemble a water supply hose that fits to the tap as shown s NOTICE After completing connection if water leaks from the hose then repeat the same steps Use the most conventional type of faucet for water supply In case the faucet is square or too big remove the spacing ring before inserting the faucet into the adaptor CLEANING THE FILTER NET 1 Push the upper part of 2 Open the cover as 3 Clean the filter 4 Close the cover and insert the lower the filter and pull in shown in the figure part of the filter in the basket first and then push the filter with click sound HOW TO ADD THE FABRIC SOFTENER When a proper amount one time does of fabric IN CASE OF COLD HOT WATER WASHER f you use only cold water inlet hose softener is stored in the softener inlet it is you must fit the cap to the hot water automatically put in at the last rinsing cycle inlet valve as following Do not use detergent bleach or starch into the Softener Inlet Using too much softener may produce unsatisfactory results SS Do not open the lid during the Spin Dry cycle ot If added too early its effectiveness Cold Ez will decrease Do not leave the softener into the ee
6. supply hose or hose Pa 4 y connection clogged in the washer Is the water tap frozen Is the washer set on a sturdy If water is not supplied in 1 hour a flat surface buzzer will sound and the remaining time indicator will show 7E Power won t cut off Water is overflowed This sign means power is not cut Restart after spinning off automatically lf the error sign still indicates Make sure there is lighting call agency on the lamp whenever press the power button This washing machine has the memory function when the power is cut off In case power is cut off and power on again the the washing machine continue operating the memorized past course subsequently cautio In case of power on the washing machine operate itself before your selecting it is not out of order In that case you have to press the power button power off and after power on again the washing machine will operate according to your selection IN CASE THE NEED FOR SERVICING ARISES Don t hesitate to call any agency nearby with your name address and telephone number when anything wrong with your product occurs m SPECIFICATIONS WASH 310W HIGH RATED POWER CONSUMPTION SPIN oc STANDARD WATER LEVEL DIMENSIONS __Wo4oxDs6oxtesomm MN 380 WEIGHT 31kg WATER USAGE 0 05 0 78 MPa PULSATOR aoe WATER PRESSURE 0 5 8 0 kgf cm ROTATING SPEED PR WASHING TYPE Stirring Type See iiA 760rpm CODE NO DC68 00917A
7. the drain hose into the hose in the position connect the drain outlet on theback of about 70 80cm outlet hose of the machine above the ground cap hose V outlet hose PANEL ption Tilt the washer a little and lift up the panel until it clicks filnaly fix the panel with screw to the base as shown in the figure Rear side CONNECTING THE DRAIN HOSE After pressing the joint ring a insert the drain hose b to drain direction a LEVELLING SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING THE POSITION OF THE WASHING TUB Open the lid of the machine pour water into the tub up to the level just below the pulsator and adjust the legs so that the pulsator is positioned at the center of the water as shown in the figure Place the machine more than 10cm away from the wall c Adjust the legs on feet for levelling Loosen 4 Lock CONNECTING THE WATER SUPPLY HOSE 1 Remove the adaptor from the water supply hose 2 First using a type screw driver loosen the four screws on the adaptor Next take the adaptor and turn part b following the arrow for gap about 5mm between them 3 Connect adaptor to the water tap by tightening the screws firmly Then turn part b following the arrow and put a and b together 4 Connect the water supply hose to the adaptor Pull down the part c of the water supply hose When the part c is released the hose
8. Owner s Instructions Before operating the unit please read this manual throughly and retain for future reference FEATURES EAEE S E EE E AE E 4 aac Ae a ene EE E Gane epee Raa aes a Done Beane eRe Seam a Aen 1 SAFETY INSTRUC TIONS ree tie erection D DESCRIPTION OF PARTS 3 CONTROL PANEL gt e 4 WASHING PROCEDURE iit etc wissen riamertiniersiniaatninoniabientinns 5 Fuzzy COUS e eemesmirhiineiehe aiiiar kerin tiskites idies piaiia rensei niiki narnetaniestata kim 5 Heavy COUSO A Aerie iaiia da i hE eee eee eee eee Eie 5 Speedy course oeeo ee e ie cic etc tices 5 Wool course oee EEEE 5 Se Ree e sce E E as ogg T A aoe 5 BLEVE cae Te EEE 6 MANUAL FUNCTIONS gt 6 INSTALLATION amp MAINTENANCE 7 Environment iciv ster capacity aren bein te alas weeitcn pe denen tenaepepsaiyenceerbeaiadinss Man atette cee 7 In case of pump drained washer ooeec 7 Assembling the sound absorbing panel o0 7 Connecting the drain hose ooeec 7 Levelling E E E eee Chad aay eee wee Se eeu 7 Connecting the water SUDPIY NOSE esmisieiiiisrsitrssdirerisoiiiiii innisin niise 7 Cleaning the magic filter ee 8 How to add the fabric softener ooon 8 In case of cold hot water washer aaa 8 How to clean the filter 00000 8 How to put the detergent in ooe 8 How to Assemble the legs 000a 8 TROUBLESHOOTING SPECIFICATIONS FUZZY CONTROL Fuzzy control operates with best washing course by sensing the washload like artificial intelligence TRANSPARENT WINDOW O
9. Washing and rinsing go on for 38 minutes Button twice ODA Function Button three times OMA Function Button four times ODA When the FUNCTION button is pressed during working the rinse times Function can be changed to between 1 and 5 times in duration RINSE AND SPIN Press the FUNCTION button six times Press the START HOLD button once Rinsing and spin drying follow When the FUNCTION button is pressed during working the rinse times can be changed to between 1 and 5 times in duration Button five times OLDIE Function Button six times INSTALLATION amp MAINTENANCE ENVIRONMENT ASSEMBLING THE SOUND ABSORBING Leave some space Maintain at least 10cm between the washer and the wall Place the washer on a sturdy flat surface lf the washer is placed on an uneven or weak surface noise or vibration occurs Allowable is 1 Adjust the legs for even placement Never install the washer near water Do not place the washer in steamy rooms or where the washer is directly exposed to rain Moisture may destroy the electrical insulation causing an electrical shock hazard Avoid direct sunlight or heaters As plastic and electrical components are affected by direct heat never place the washer near furnaces boilers etc Do not place under direct sunlight IN CASE OF PUMP DRAINED WASHER Take outthe Be sure to join tightly Install the drain cap hoseand
10. al make sure to cover the end of the ground wire WATER DRAIN HOSE CONTROL PANEL 1 POWER BUTTON 6 Press this button once to operate Press once again to turn the washer off WATER LEVEL SELECT BUTTON According to the washload select the water level 2 START HOLD BUTTON MEDIUM gt HIGH gt EXTRA LOW gt LOW Use to pause and restart the operation 7 WATER SUPPLY SELECT BUTTON Option To change the washing procedure during operation press this button to stop and once again to restart after changing the procedure 3 DELAY START BUTTON Press this button when delay start As you press this button the type of water is selected as follows COLD gt COLD HOT gt HOT gt COLD 8 REMAINING TIME INDICATOR LIGHT washing is needed The indicator light shows the remaining time in minutes of each wash cycle 4 ena seine teenie hi At the end of the cycle the power automatically i eels ue of this button the washing ewiichecor FUZZY gt HEAVY gt SPEEDY gt WOOL gt SAREE gt FUZZY 9 FUNCTION INDICATOR LIGHT The function in use indicator shows the 9 FUNCTION SELECT BUTTON current function as a flashing symbol With every press of this button the The light goes out at the end of the function function changes SOAK WASH RINSE SPIN gt WASH gt RINSE gt SPIN gt WASH amp RINSE gt RINSE amp SPIN gt WASH RINSE SPIN START PAUSE i O DELAY START POWER W WATER LEVEL FUNCTION WASHING PROCEDURE
11. ce 3 Press the START HOLD button and put the proper amount DELAY START COURSE Select this course when you have to go out or do something else 1 Press the power button to ON POWE R 2 Press the DELAY START select button twice You may change the delay start time with use the DELAY START button DELAY START from 3 hours to 18 hours of detergent into tub START HOLD 4 Close the lid The washing finishes by the time you reserved MANUAL FUNCTIONS BUTTON ORDD Course Function Button Button Water level is selected automatically Washing rinsing and spinning follow once WASH ONLY Press the POWER button Press the FUNCTION SELECT button twice Press the START HOLD button once Washing goes on for 18 minutes ODA When the FUNCTION button is pressed during washing he wash time can be Function changed to between 3 and 25 minutes in duration RINSE ONLY Press the FUNCTION button three times Press the START HOLD button once Rinsing goes on for 15 minutes When the FUNCTION button is pressed during rinsing the rinse times can be changed to between 1 and 5 times in duration SPIN ONLY Press the FUNCTION button four times Press the START HOLD button once Spin drying goes on for 9 minutes When the FUNCTION button is pressed during spinning the spin time can be changed to from 5 to 11 minutes WASH AND RINSE Press the FUNCTION button five times Press the START HOLD button once
12. pin This Transparent Window is the new concept to solve the curiosity of users to see inside of washing machine while operation While operation the laundry progress inside of washing machine can be checked by looking through the transparent window CENTER JET Water shall spout out at the center of barrel of your washing machine and shall wash your washing thoroughly WATERFALL FLOW The Waterfall Flow injected from under the pulsator cascades with full force back into the tub pushing down any clothes that float right under the water surface It is this Waterfall Flow that enables this washing machine to effectively wash large and heavy items such as bluejeans and blankets MAGIC FILTER This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering results to deliver consistently effective cleaning results SOFTENER DISPENSER The Softener Dispenser releases the fabric softener at the appropriate time when the last rinsing proceeds TOI OAFETY INSTRUCTIONS WARNING To reduce the risk of fire electric shock or injury to persons when using your appliance take care to adhere to the following precautions gt Where an unearthed power cord is not fitted be sure that the washer is grounded To avoid electrical shock use metal piping for the ground connection Take care not to ground the washer to gas pipes or telephone cables due to the danger of explosion from lightning strikes
13. ra low water level is not available Cold water is selected WOOL COURSE 1 Press the power button to ON POWER 2 Press the course select three times 3 Press the START HOLD button Washing rinsing and spinning follow If you want to pause press the START HOLD button again You can change the course when paused START HOLD 4 Close the lid CAUTION Do not use water above 30 c for WOOL washing Refer to the tag attached on the clothes for washing information Fasten buttons and turn inside out before washing Use the detergent indicated in the laundry When the degree of dirt is extreme soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency SAREE COURSE Select this course when you have to go out or do something else 1 Press the power button to ON POWER Press the course select button once Press the START HOLD button Water level is selected automatically Washing rinsing and spinning follow If you want to pause press the START HOLD button again START HOLD You can change the course when paused Close the lid Suitable number of Saree for laundering is three to five FUNCTION SOAK FUNCTION Including WASH RINSE SPIN Press the POWER button Select the course Press the course button FUZZY HEAVY SPEEDY WOOL SAREE Press the FUNCTION SELECT button once Press the START HOLD button on
Download Pdf Manuals
Related Search