Home

Samsung 1000 W 5.1Ch Blu-ray Home Entertainment System J5550 User Manual

1. If you go to the Music List from the Playlist and then return to the Playlist the Playlist will start playing again from the beginning Ripping I Insert a USB device into the USB jack on the front of the product 2 With the Playback screen displayed use the AV buttons to select a track and then press the YELLOW C button A check appears to the left of the track 3 Repeat Step 2 to select and check additional tracks 4 Toremove a track from the list move to the track and then press the YELLOW C button again The check on the track is removed 5 When done press the TOOLS button The Tools menu appears 6 Use the AY buttons to select Rip and then press the button The Rip screen appears 7 Use the AY buttons to select the device to store the ripped files on and then press the button Do not disconnect the device while ripping is in progress 8 Ifyou want to cancel ripping press the button and then select Yes Select No to continue ripping 9 When ripping is complete the Ripping is completed message appears I0 Press the button to go back to the Playback screen amp This function is not available for DTS Audio CDs This function may not be supported by some discs Ripping encodes music in the mp3 format at I92kbps amp On the Track list screen you can choose Select All or Deselect All Use Select All to select all tracks and then press the button This c
2. Definition for Blu ray Disc adds Navigation Sound Effects Blu ray Discs may include three audio streams Main Feature Audio The audio soundtrack of the main feature BONUSVIEW audio An additional soundtrack such as the director or actor s commentary Navigation Sound Effects When you choose some menu navigation options Navigation Sound Effects may sound Navigation Sound Effects are different on each Blu ray Disc 43 English Appendix Resolution according to the output mode Blu ray Disc E contents Digital Contents playback DVD playback eg a etup BD Wise Auto 080p 60F I080p Movie Frame Auto 2479 I080i 720p 576p 480p HDMI Mode Digital contents Disc Max Resolution of TV input Troubleshooting Refer to the table below when this product does not function properly If the problem you are experiencing is not listed below or if the instructions below do not help turn off the product disconnect the power cord and contact the nearest authorized dealer or Samsung Electronics Service Center Symptom You cannot eject the disc Playback does not start Playback does not start immediately when you press the B M button No sound You can only hear sound from a few speakers but not all 6 Check Remedy Is the power cord plugged securely into the outlet Turn off the power and then turn it back on Check the region number of the Blu ray DVD disc A Blu ray DVD disc purchased
3. External Devices Connecting to a TV Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV If the TV supports ARC you can hear the audio from your TV through the home theater with only this cable connected See page I6 in this manual and the section on ARC in your TV s user s manual for details Connecting to External Devices Two methods of connecting external devices to your home theater are explained below Method AUX IN Connecting an External Analog Component Using an RCA audio cable not supplied connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component gt Select the AUX mode e Be sure to match the colors on the cable plugs to the colors on the input and output jacks Method 2 OPTICAL Connecting an External Digital Audio Component Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers Set Top Boxes to the home theater Using a digital optical cable not supplied connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable S Select the D IN mode To see video from your Cable Box Satellite receiver you must connect its video output directly to your TV This system supports Digital sampling frequencies of 32 kHz or higher from external digital components This system supports o
4. Disc Storage amp Management e Holding Discs Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping Avoid touching the surface of a disc where data has been recorded Hold the disc by the edges so that fingerprints will not get on the surface Do not stick paper or tape on the disc e Cleaning Discs If you get fingerprints or dirt on a disc clean it with a mild detergent diluted in water and wipe with a soft cloth inside to the outside of the disc IusuoD bulkeld j Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean protective jacket and store vertically Playing a Disc with User Recorded Content You can play multimedia files you have recorded on Blu ray DVD or CD discs Place a user recorded disc into the disc tray with the disc s label facing up and then close the tray Use the A Y lt P buttons to select the type of content you want to view or play PHOTOS VIDEOS or MUSIC and then press the button OR Select PLAY DISC from the Home screen The PLAY DISC screen appears Use the AV buttons to select the desired content type Photos Videos or Music 25 English Playing Content 3 A screen appears listing the contents of the disc Depending on how the contents are arranged you will see either folders individual files or both 4 f necessary use the AY lt P buttons to select a folde
5. POWERED This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited Blu ray Disc Blu ray and the logos are trademarks of Blu ray Disc Association This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film and videos and their soundtracks When a prohibited use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by mail send a postcard with your mailing address to Cinavia Consumer Information Center P O Box 8685 San Diego CA 9238 USA This product incorporates proprietary technology under license from Verance Corporation and is protected by U S Patent 7 369 677 and other U S and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology Cinavia is a trademark of Verance Corporation Copyright 2004 20 0 Verance Corporation All rights reserved by Verance Reverse engineering or disassembly is prohibited Open Source License Notice In the case of using open source software Open Source Licenses are available on the product menu 48 Engli
6. Accumulated dust can cause an electric shock an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate Contact an authorized service center for information if you intend to install your product in a location with heavy dust high or low temperatures high humidity chemical substances or where it will operate 24 hours a day such as in an airport a train station etc Failing to do so may lead to serious damage of your product Use only a properly grounded plug and wall outlet An improper ground may cause electric shock or equipment damage Class Equipment only To turn this apparatus off completely you must disconnect it from the wall outlet Consequently the wall outlet and power plug must be readily accessible at all times 2 En glish e Do not allow children to hang on the product e Store the accessories battery etc in a location safely out of the reach of children e Do not install the product in an unstable location such as a shaky self a slanted floor or a location exposed to vibration Do not drop or strike the product If the product is damaged disconnect the power cord and contact a service center e To clean this apparatus unplug the power cord from the wall outlet and wipe the product using a soft dry cloth Do not use any chemicals such as wax benzene alcohol thinners insecticide air fresheners lubricants or detergen
7. Detailed Function Information Resolution Each Settings function menu item and individual option is explained in detail on screen To view an explanation use the AY lt gt buttons to select the function menu item or option The explanation will usually appear on the bottom of the screen A short description of each Settings function starts on this page Additional information on some of the functions is also in the Appendix of this manual Movie Frame 24Fs Lets you set the output resolution of the HDMI video signal to BD Wise Auto 080p 080i 720p 576p 480p The number indicates the number of lines of video per frame The i and p indicate interlaced and progressive scan respectively The more lines the higher quality Setting the Movie Frame 24Fs feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV e You can enjoy the Movie Frame 24Fs feature only on a TV supporting this frame rate e Movie Frame is only available when the product is in the HDMI 7080p output resolution modes 5 English suyas Settings HDMI Color Format Lets you set the color space format for the HDMI output to match the capabilities of the connected device TV monitor etc HDMI Deep Color Lets you set the product to output video from the HDMI OUT jack with Deep Color Deep Color provides more accurate color reproductio
8. button Select the IP Setting field and then set it to Enter manually Select a network parameter to enter IP Address for example and then press button Use the number keypad on your remote control to enter the numbers for the parameter You can also enter numbers using the A Y buttons Use the lt b buttons on the remote 4 When it is done highlight OK and then press control to move from entry field to entry field the button within a parameter When done with one value amp For a WPS connection set your wireless router s press the Eg button security encryption to AES WEP security Press the A or V button to move to another encryption does not support a WPS connection parameter and then enter the numbers for that parameter following the instructions in Step 8 Repeat Steps 8 and 9 until you have filled in all parameters 2I English shulyloS Settings The Wi Fi Direct function allows you to connect Wi Fi Direct devices to the product and each other using a peer to peer network without a wireless router Some Wi Fi Direct devices may not support the DLNA function if connected via Wi Fi Direct If this is the case change the network connection method you used to connect the device to the home theater Wi Fi Direct transmissions can interfere with Bluetooth signals Before you use the Bluetooth function we strongly recommend that you turn off the Wi Fi Direct function on any device in which it
9. ex HT J5550K User manual 5 ICH Blu ray Home Entertainment System a QS NMA T imagine the possibilities Thank you for purchasing this Samsung product www samsung com register Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product This symbol indicates that important literature concerning operation and maintenance has been included with this product The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation To ensure reliable operation of this apparatus and to protect it from overheating these slots and openings must never be blocked or covered Do not place this apparatus in a confined space such as a bookcase or built in cab
10. CH Surround Sound is produced only if the disc is recorded with 5 channel sound Is the audio language correctly set to Dolby Digital 5 4 CH in the information display Are you operating the remote within its operational range and within the proper angle relative to the sensor Are the batteries drained Have you selected the correct mode Press the function button to change the mode BD DVD D IN AUX etc Is the TV power on Are the video cables connected properly Is the disc dirty or damaged A poorly manufactured disc may not be playable The Audio Language and subtitle functions will not work if the disc does not contain multiple language sound tracks or subtitles Are you using a disc that does not contain menus The home theater can play 76 9 Blu ray DVD discs in 46 9 Full mode 4 3 Letter Box mode or 4 3 Pan Scan mode but plays 4 3 Blu ray DVD discs in 4 3 mode only Refer to the Blu ray Disc jacket and then select the appropriate aspect ratio xipueddy Press and hold the remote control s GB button for 5 seconds in STANDBY mode This will reset the unit Using the RESET function will erase all stored settings Do not use this function unless necessary With no disc in the product press and hold the product s J button for longer than 5 seconds INIT appears on the display and all settings will return to their default values Using the RESET function will erase all stored settings Do not use this
11. screen size adjustment and resolution adjustment may not operate properly in 3D play mode You must use a high speed HDMI cable for proper output of the 3D signal e Stay at least three times the width of the screen from the TV when watching 3D images For example if you have a 46 inch screen stay 3 5 meters from the screen e Place the 3D video screen at eye level for the best 3D picture e When the product is connected to some 3D devices the 3D effect may not function properly e This product does not convert 2D content into 3D Blu ray 3D and Blu ray 3D logo are trademarks of the Blu ray Disc Association 3 En glish uonewuo ul Jes i Contents NOD oO Oo 7 2 I3 4 4 I5 I8 I9 22 23 24 25 25 25 26 27 29 29 3 3 32 33 GETTING STARTED Accessories Speaker Components Front Panel Rear Panel Remote Control CONNECTIONS Connecting the Speakers Connecting to a TV and External Devices Connecting to a Network Router SETTINGS The Initial Settings Procedure The Home Screen at a Glance Accessing the Settings Screen Settings Menu Functions Radio Setup Network Setup Wi Fi Direct Upgrading Software Setting Up DLNA PLAYING CONTENT Switching the Source Device Playing Commercial Discs Playing a Disc with User Recorded Content Playing Files on a USB Device Controlling Video Playback Playing a Pre Recorded Commercial Audio Disc Controlling Music Playback Play
12. theater system in the list of available devices and then select it 37 English The TV displays a connecting message for example Connecting to Android_92gb and then displays the connected message In a few moments the screen of your device appears on the TV screen When you are using the Screen Mirroring function video stuttering or audio dropouts may occur depending on your environment The Home Theater can connect to devices that support AllShare Cast Note that all devices that have AllShare Cast may not be fully supported depending on the manufacturer For further information on mobile connection support refer to the manufacturer s web site Bluetooth transmissions can interfere with the Screen Mirroring signal Before using the Screen Mirroring function we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device SODIAIOS YJOMJ N Appendix Additional Information Notes Connections HDMI OUT e Certain HDMI output resolutions may not work depending on your TV e You must have an HDMI connection to enjoy videos with 3D technology e Along HDMI cable may cause screen noise If this occurs set HDMI Deep Color to Off in the menu Settings 3D Settings e For some 3D discs to stop a movie during 3D playback press the J button once The movie stops and the 3D mode option is de activated To change a 3D option selection when you are playing a 3D movi
13. 3 Select the Sound and then press the button 4 Select My Karaoke and then press the button You can check the Karaoke score and adjust the volume of playback music s vocal e Your Karaoke score is automatically displayed if Karaoke Scoring is set to On and a microphone is connected If you don t want to see the score set Karaoke Scoring to Off f you want to decrease the volume of the vocals in the original sound select Reduce Vocals in My Karaoke settings Recording You can make a recording of karaoke with music During the playback press the TOOLS button to select Karaoke Recording and then press button 2 Press button if you want to finish recording When recording is done KARAOKE folder is created in the USB storage driver and saved as the form of KARAOKE mp3 To save recording file USB storage driver must be inserted Recording file is shown if you re entry to Photos Videos and Music amp If you hear strange noises squealing or howling while using the Karaoke feature move the microphone away from the speakers Turning down the microphone s volume or the speaker volume is also effective amp The microphone does not operate in the D IN AUX FM and BT mode amp The karaoke scoring displays the score automatically when the Karaoke Scoring is set to On and a microphone is connected Disconnect the microphone if you do not want to display the score The mic becomes availab
14. 8 46 22 32 44 48 wma WMA 5 Bitrates All bitrates from 5kbps to 384kbps Picture File Support File Extension Resolution jpg jpeg jpe png 5360x8640 42 English Digital Output Selections Bitstream Bitstream Bitstream Setup PCM Re encoded Unprocessed Re encoded DTS Dolby D Connection HDMI supported AV receiver Dolby Digital Dolby Digital Dolby Digital Doby Digtal Pus Audio Dolby TrueHD Dolby TrueHD SR Stream on DTS re encoded Dolby Digital Blu ray Disc DTS Up to PCM 5 Ich DTS oloy Digita DTS HD High DTS HD High Resolution Audio Resolution Audio DTS HD Master DTS HD Master Audio Audio Audio Stream on Dolby Digital O DVD Up to PCM 5 tch gt Decodes the main feature Outputs only the Decodes the main audio and oT henian main feature audio feature audio and BONUSVIEW stream so that your BONUSVIEW audio audio stream feature audio and i BONUSVIEW audio AV receiver can stream together together into decode the audio into PCM audio and PCM audio and Any stream together i aes pe aks fio PCN Udo ane bitstream adds Navigation adds Navigation You will not hear Sound Effects then Sound Effects BONUSVIEW audio re encodes the then re encodes or Navigation Sound PCM audio into DTS the PCM audio Effects bitstream into Dolby Digital bitstream or PCM f the Source Stream is 2ch or mono Re encoded Dolby D Setting are not applied Output will be PCM 2ch
15. EXIT button on your remote To delete the login information for all Apps press the button for 5 seconds or more in Home Screen No Disc Status Using Opera TV Store At the Opera TV Store you will find high quality Internet video streaming social network and music streaming services Accessing Opera TV Store To access Opera TV Store select the Opera TV Store button on the Home screen and then press the button To exit the Opera TV Store screen press the EXIT button on your remote Navigating in Opera TV Store When the Opera TV Store screen appears it displays a bank of assorted apps Use the AY lt P gt buttons on your remote to move the highlight from app to app Selecting an App Move the highlight to the app you want and then press the J button In the pop up that appears select OPEN to open the app immediately 0 ADD TO MY APPS to add the app to MY APPS Press the RETURN button on your remote to go back to the Opera TV Store screen Selecting Apps by Category To make searching for apps easier you can view apps by categories such as New Popular All Games Music etc To select a category use the A button on your remote to move the highlight to the top of the screen Then use the ew buttons to select a category Using the My Apps Screen To access the My Apps screen highlight MY APPS and then press the button The My Apps screen appears displaying all the apps you have saved wi
16. The position of the subwoofer is not so critical Place it anywhere you like The appearance of your speakers may differ from the illustrations in this manual Each speaker has a colored label on its back or underside Each cable has a single colored band near its end Match the band on each cable to the speaker label by color and then connect the cable to the speaker See page 9 for exact instructions 8 Fn glish Installing the Speakers on the Tallboy Stand it to the Stand 4 Stand Base Use the driver to fasten the screws 5x20 on bs Ie Stand Turn the Stand Base upside down and connect 2 the 4 marked holes Straighten the provided speaker cable and run it through the center hole of the Stand Base Pull the cable out from the hole of the stand pols Speaker Connect the upper Speaker to the assembled Stand Stand Insert a screw 5x5 and fasten it lockwise through the hole on the rear of the speaker using a screwdriver Arrange the speaker cable along the groove on the rear side of the stand pole Connect the arranged speaker cables to the port on the speaker s rear side while matching their colors This is the appearance after the speaker is installed Follow this steps to install other speaker Speaker Cable Connections I Match each speaker cable bundle to the correct speaker by matching the colored band on each bundle to the colored sticker on the bottom or back of each spe
17. USB card readers The product does not support folder or file names longer than 28 characters Some USB digital camera devices may not be compatible with the product Your product supports the FAT 6 FAT 32 and NTFS file systems Connect USB devices directly to the product s USB port Connecting through a USB cable may cause compatibility problems Inserting more than one memory device into a multi card reader may cause the reader to operate improperly The product does not support the PTP Peer to Peer protocol Do not disconnect a USB device while it is transferring or recording data The bigger the image resolution the longer the image takes to display This product cannot play MP3 files with DRM Digital Rights Management downloaded from commercial sites Your product only supports video that is under 30fps frames per second Your product only supports USB Mass Storage Class MSC devices such as thumb drives and USB HDD HUB is not supported Certain USB HDD Devices multi card readers and thumb drives may not be compatible with this product If some USB devices require excessive power they may be limited by the circuit safety device If playback from a USB HDD is unstable provide additional power by plugging the HDD into a wall socket If the problem continues contact the USB HDD manufacturer SAMSUNG is not responsible for any data file damage or data loss xipueddy 4I English Appe
18. audio or HDMI audio output to your TV It affects the optical and HDMI audio output when your product is connected to an AV receiver f you play MPEG audio soundtracks the audio signal outputs as PCM regardless of your Digital Output selections PCM or Bitstream e Digital Output can be activated when Speaker Selection is set to TV Speaker BD Live Internet Connection e The Internet connection may be restricted while you are using BD LIVE contents Anynet HDMI CEC Depending on your TV certain HDMI output resolutions may not work Please refer to the user manual of your TV e This function is not available if the HDMI cable does not support CEC f your Samsung TV has an Anynet logo then it supports the Anynet function BD Data Management In the external memory mode disc playback may be stopped if you disconnect the USB device in the middle of playback e Only those USB devices formatted in the FAT file system DOS 8 3 volume label are supported We recommend you use USB devices that support the USB 2 0 protocol with 4 MB sec or faster read write speeds e The Resume Play function may not work after you format the storage device e The total memory available to BD Data Management may differ depending on conditions DivX Video On Demand For more information about DivX R VOD visit http vod divx com 38 English Speaker Settings When Speaker Selection is set to TV Speak
19. evolve and problems and errors may occur during the creation of Blu ray Disc DVD and CD software and or the manufacture of discs amp Please contact the SAMSUNG Customer Care Center at if you have questions or encounter difficulty when playing Blu ray Discs DVD or CD discs in this product Also refer to the rest of this user manual for additional information on playback restrictions Some commercial discs and DVD discs purchased outside your region may not play on this product Logos of Discs the Product can Play Blu ray JILy TM Blu ray Oisc Blu ray Disc 3D Blu ray Disc BD OQI DOLBY LIVE __TRUEZE Lo DIGITAL PLUS BD LIVE Dolby S S dts up Master Audio Essential ava POWERED DTS Java PAL ip PAL broadcast system in U K DivX France Germany etc Region Code Both products and discs are coded by region These regional codes must match for a disc to play If the codes do not match the disc will not play The Region Number for this product is displayed on the rear panel of the product HEE Area Type North America Central America South America Korea Japan Taiwan Hong Kong and South East Asia Blu ray Europe Greenland French Disc territories Middle East Africa Australia and New Zealand India China Russia Central and South Asia 40 English The U S U S territories and Canada Europe Japan the Middle East Egypt Africa Greenland Tai
20. home theater verifies the network On the Security method screen that appears select OK and then press the button use the AY buttons to select the network s Security method and then press the button You can also begin the Manual Network setup by On the next screen enter your network s going to Settings gt Network gt Network Status security code or pass phrase 3 WPS PBC Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with the AY lt gt buttons and then pressing the button When finished select Done and then press the button The product searches for the network One of the easiest ways to set up the wireless network connection is using the WPS PBC function If your wireless router has a WPS PBC button follow these steps Follow the Steps 7 to 3 in Configuring Your Network Connection See page 79 In the Network Settings screen change Network Type to Wireless The product searches for and then displays a list of the available networks Scroll the list down select WPS PBC and then press the amp button 3 Press the WPS PBC button on your router within two minutes Your product automatically acquires all the network settings values it needs and connects to your network after the network connection is verified The Network connection fail screen appears Use lt gt buttons to select IP Settings and then press the
21. is Currently on 7 Turn on the Wi Fi Direct device and activate its Wi Fi Direct function 2 Inthe Home screen select Settings and then press the J button 3 Select Network and then press the J button 4 Select Wi Fi Direct and then press the button The Wi Fi Direct devices that you can connect to appear 2 Settings Wi Fi Direct Device Name HTS J5550K Select your Wi Fi Direct device to connect to Refresh 5 You have three ways to complete the Wi Fi connection e Through the Wi Fi device e Through the product using PBC e Through the product using a PIN Each is covered below Through the Wi Fi Device I Onthe Wi Fi device follow the device s procedure for connecting to another Wi Fi Direct device See the device s user manual for instructions 2 When you have completed the procedure you should see a pop up on your TV screen saying that a device that supports Wi Fi Direct has requested to connect Confirm that the device that is making the request is your device select Yes in the pop up and then press the button to accept 3 The Connecting pop up appears followed by the Connected pop up You should see the device listed as connected on the Wi Fi Direct screen and then press the button e The PBC and PIN procedures connect devices automatically Through the Product Using PBC I Select the Wi Fi Direct device you want to connect to this product and then press the button
22. screen saver mode for more than 20 minutes the power automatically turns off Screen Mirroring 4 English Buttons on the Remote Control Used Settings Menu Functions for the Settings Menu Picture 3D Settings mj fa INFO Set up the 3D related functions 3D Blu ray Playback Mode Select whether to play a Blu ray Disc with 3D contents in 3D Mode If you move to the Home menu while in 3D mode eo awe te me J the product will switch to 2D automatically Screen Size Enter the size of the TV attached to the product The product will automatically adjust the 3D E Button Press to move to the Home output to the screen size of the TV PLSI Carefully read the health and safety information RETURN Buiton Press to return to the before viewing 3D content See page 3 previous menu TV Aspect Ratio ENTER DIRECTION Button Lets you adjust the output of the product to the e Press AY lt P to move the cursor or screen size of your TV See page 38 select an item BD Wise Press the button to activate the currently selected item or confirm a BD Wise is Samsung s latest inter connectivity setting feature When you connect a Samsung product and a Samsung TV with BD Wise to each other EXIT Button Press to exit the current via HDMI and BD Wise is on in both the product menu and TV the product outputs video at the video resolution and frame rate of the Blu ray DVD Disc
23. the disc For an MP3 disc press the lt P buttons to select MUSIC then press the eh button Tools Repeat Mode Equalizer Mode Rip Karaoke Recording Move 4 Adjust Return TRACK 004 04 02 00 00 00 00 TRACK 005 03 43 TRACK 006 03 40 Pause Select Tools 3 Return 2 To play a particular track use the AY buttons on the remote to select the track and then press the J button amp For more information about playing music see Controlling Music Playback below Controlling Music Playback You can control the playback of music content located on a DVD CD USB mobile device or PC Depending on the disc 07 contents some of the functions described in this manual may not be available Buttons on the Remote Control used for Music Playback 6 Number buttons During Playlist playback press the desired track number The selected track is played Skip During playback press the BB or ED button to move to the previous or next music track U9 U0D bulkeld i button Stops a track Fast Play Audio CD CD DA only During playback press the or button Each time you press the BY or amp button the playback speed will change O button Pauses a track button Plays the currently selected track Repeating Tracks You can set the product to repeat tracks iP 29 English During music playback press the TOOLS button Select Repea
24. 2 The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed as connected on the Wi Fi Direct screen Through the Product Using a PIN I Select the Wi Fi Direct device you want to connect to this product and then press the button 2 The PIN pop up appears 3 Note the PIN code in the pop up and then enter it into the appropriate field in the Wi Fi Direct device you want to connect 22 English 4 The Connecting pop up appears followed by the Connected pop up When it closes you should see the device listed as connected on the Wi Fi Direct screen amp The current wired or wireless network connection will be disconnected when you use the Wi Fi Direct function amp Text files such as files with a TXT or DOC extension will not display when you are using the Wi Fi Direct function Upgrading Software The Software Upgrade menu allows you to upgrade the product s software for performance improvements or additional services e Never turn the product off or back on manually during the update process e The update is complete when the product turns off after restarting Press the POWER button to turn on the updated product for your use e Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade I Inthe Home menu select Settings and then press t
25. P Settings Contact your Internet Service Provider for more information Change Network IP Settings Retry Close C Previous Skip Move Select 2 Use the lt gt buttons to select IP Settings and then press the button The IP Settings screen appears 3 Select the IP Setting field and then set it to Enter manually 4 Select a parameter to enter IP Address for example and then press Use the number keypad on your remote control to enter the numbers for the parameter You can also enter numbers using the A Y buttons Use the lt gt buttons on the remote control to move from entry field to entry field within a parameter When done with one parameter press the button 5 Press the A or button to move to another parameter and then enter the numbers for that parameter following the instructions in Step 4 6 Repeat Steps 4 and 5 until you have filled in all parameters You can get the network parameter values from your Internet provider 7 When finished entering all the parameter values select Return 5 and then press the button The home theater verifies the network connection and then connects to the network Wireless Network You can set up a wireless network connection in three ways Wireless Automatic Wireless Manual WPS PBC Before you configure the wireless network connection disconnect any wireless network devices currently connected to the product or if applicable the pr
26. You can turn on the power quickly by decreasing the boot time lf this function is set to On Standby power consumption will be increased About I2W 20W Anynet HDMI CEC Anynet is a convenient function that offers linked operations with other Samsung products that have the Anynet feature and lets you control those products with one Samsung TV remote To operate this function you must connect this product to an Anynet Samsung TV using an HDMI cable BD Data Management Lets you manage the contents you downloaded through a Blu ray disc that supports the BD Live service You can view information about the USB device you are using for BD Live data storage including the available storage space You can also delete BD Live data and change the device DivX Video On Demand View DivX VOD Registration Codes to purchase and play DivX VOD contents Language Lets you select the language you prefer for the On Screen Menu Disc Menu etc The selected language will only appear if it is supported on the disc 7 English shulyloS Settings Security The default PIN is 0000 Enter the default PIN to access the security function if you haven t created e To listen to the radio you must connect the your own PIN supplied FM antenna BD Parental Rating c Operating the Radio with the Remote Control Prevents playback of Blu ray Discs with a rating equal to or above a specific age rating unless you 7 P
27. aker Connect the speaker wire plugs from each speaker to the back of the product by matching the colored band on each cable to the colors of the speaker jacks When connecting make sure to match label color on the back of speaker 9 English O gt r gt 77 Connections Surround Speaker L Front Speaker L Sie Surround CO Speaker R ene Center Speaker Subwoofer Front Speaker R amp If you place a speaker near your TV set the screen color may be distorted because of the magnetic field CAUTION gt Ifyou want to install the speakers on the wall fasten screws or nails not provided firmly to the wall wherever you want to hang a speaker and then using the hole in the rear of each speaker carefully hang each speaker on a screw or nail Do not let children play with or near the speakers They could get hurt if a speaker falls gt When connecting the speaker wires to the speakers make sure that the polarity is correct Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct hole of the subwoofer speaker gt Do not hang the subwoofer on the wall by the duct hole 0 English Connecting to a TV and External Devices AUXIN FM ANT F R ed HDMI OUT White Bi D AUDIO OUT OPTICAL OUT HDMI IN ARC
28. an control the playback of files on your PC in the same fashion you control the playback of files on USB devices and discs You can also access files on your PC by first selecting PHOTOS VIDEOS or MUSIC on the Home screen and then selecting your PC from the device list that appears Your home theater offers an extensive collection of news movies weather and other content you can download directly to and enjoy on your home theater First check the network and make sure the home theater is connected to the Internet Your home theater must be connected to the Internet to use the Apps feature The apps offered through the Apps feature work much like their on line versions or if different are easy to use Some apps require you to create an account before you can use them Although you can create an account for most of these apps through your home theater it is easier and quicker to create an account by visiting the app sites on line using a PC laptop or tablet with Internet access Note that in some cases you will need to use the home theater and a PC laptop or tablet to establish an account The main difference between the regular on line versions and the versions you can access through your home theater is that with the home theater versions you use your remote to enter letters and numbers as opposed to a keyboard 35 English SODINIOS YIOMION Network Services Using Apps The first time you access any one
29. ancels your individual track selections Use Deselect All to deselect all selected tracks at once 30 English Playing Photo Content Using Karaoke You can play photo content located on a DVD USB mobile device or PC Using the Tools Menu During playback press the TOOLS button Start Stop Slide Show Select to play pause the slide show Slide Show Speed Select to adjust the slide show speed Background Music Select to listen to music while viewing a slide show Zoom Select to enlarge the current picture Enlarge up to 4 times Rotate Select to rotate a picture This will rotate the picture either clockwise or counter clockwise Information Shows the picture information including the file name and size etc Depending on the disc or storage device the Tools menu may differ All options may not be displayed To enable the background music function the photo file must be in the same storage media as the music file However the sound quality can be affected by the bitrate of the MP3 file the size of the photo and the encoding method Creating a Photo Playlist You can create a photo playlist in nearly the same way you create a music playlist See page 30 for instructions Select photo files instead of music files You can enjoy the Karaoke with music 7 Connect the microphone on the front of the product 2 nthe Home menu select the Settings and then press the J button
30. and the product to your network To play content on your PC you must also download and install DLNA network software or already have DLNA network software on your PC PCs running Windows 7 and Windows 8 have DLNA software Play To built in Switching the Source Device If two or more external devices are connected to the main unit you can use any of the three methods described below to change the source device Method From the Home screen use the AY lt gt buttons to move to Change Device and then press eg The Change Device popup window will appear Use the AY buttons to move to the desired device and then press B Method 2 If you move to PHOTOS VIDEOS MUSIC or other file based contents a list of folders and files will appear Press the RED A button to display the Change Device popup window use the A Y buttons to move to the desired device and then press Method 3 When a device is connected for the first time a popup window appears In the popup you can change the source device by using the 4 buttons and then pressing ls Playing Commercial Discs 2 I Press the amp button to open the disc tray 2 Place a disc gently into the disc tray with the disc s label facing up When cleaning wipe gently from the Disc Storage Press the amp button to close the disc tray Playback starts automatically If playback does not start automatically press the button on the remote
31. arches for and then displays a list of the available networks 2 Scroll through the list select the desired network or Add Network and then press the J button 3 Ifyou selected a network in Step 2 go to Step 6 If you selected Add Network go to Step 4 20 English Enter your wireless network or wireless router s 3 You can get the Network parameter values from name your Internet provider e Enter numbers directly using the number 44 When finished select Return 2 and then buttons on your remote control press the amp 9 button The Security Key screen e Enter letters by selecting a letter with the appears AY lt gt buttons and then pressing the 72 On the Security Key screen enter your IS l l l network s Security Code or Pass Phrase Enter e To display capital letters or redisplay lower numbers directly using the number buttons on case letters if capital letters are displayed your remote control Enter letters by selecting select 4 and then press the eg button a letter with the AV lt P buttons and then To display symbols and punctuation select pressing the ey button 23 amp and then press the button To 43 When finished select Done at the right of the redisplay letters select 23 amp and then press screen and then press the button The the Eg button product verifies the network connection and When finished select Done and then press the then connects to the network E button 6 74 After the
32. ck When the software upgrade is done check the software details in the Software Upgrade menu Auto Upgrade Notification If your product is connected to the network and you set Auto Upgrade Notification on the product will notify you if a new software version is available with a pop up Message 7 Turn on the product 2 Inthe Software Upgrade menu set Auto Upgrade Notification to On If there is a new software version available the product will notify you with a pop up message 2a English shulyloS Settings 3 To upgrade the firmware select Yes The product turns off automatically turns on and then begins the upgrade 4 The update progress popup will appear When the update is complete the product will turn off automatically again 5 Press the POWER button to turn on the product Setting Up DLNA DLNA lets you play music video and photo files stored in your PC through your home theater To use DLNA you must install DLNA software or already have DLNA software installed on your PC and connect the home theater to your PC via your network See page 72 PCs running Windows 7 and Windows 8 have DLNA software Play To built in 24 English Playing Content Your home theater can play content located on 3 Blu ray DVD CD discs USB devices PCs smart phones tablets and in Apps 4 To play content located on your PC or a mobile device you must connect the PC or mobile device
33. ct supports only the following wireless security key protocols WEP OPEN SHARED WPA PSK TKIP AES WPA2 PSK TKIP AES amp Select a channel on the wireless IP router that is not currently being used If the channel set for the wireless IP router is currently being used by another device nearby it will result in interference and communication failure In compliance with the newest Wi Fi certification specifications Samsung home theaters do not support WEP TKIP or TKIP AES WPS2 Mixed security encryption in networks running in the 802 IIn mode amp Wireless LAN by its nature may cause interference depending on the operating conditions AP performance distance obstacles interference by other radio devices etc 2 English The Initial Settings Procedure 4 3 Pan Scan For older standard screen analog TVs Displays 4 3 pictures in full screen and 46 9 pictures in Pan Scan format that fills e The Home menu will not appear if you do not the screen but cuts off the left and right sides of configure the initial settings the picture and enlarges the middle vertically The OSD On Screen Display may change in 5 The Network screen appears this product after you upgrade the software Before you begin confirm that the product is connected to your router Set to wired or wireless depending on your network environment If your wireless network has a security code version The acce
34. d to a digital TV lets you adjust the audio delay so that the audio syncs with the video You can set the delay between O and 300 milliseconds Network Network Settings Lets you configure the network connection so you can enjoy various features such as Internet services or DLNA Wi Fi functionality and perform software upgrades Network Test Lets you test the Internet Protocol setup to see if it is working correctly Network Status Lets you check the current network and Internet status Wi Fi Direct Lets you connect a Wi Fi Direct device to the product using a peer to peer network without the need for a wireless router Note that if the product is connected to a wireless network it may be disconnected when you use Wi Fi Direct See page 22 Text files such as files with a TXT or DOC extension will not display when you are using the Wi Fi Direct function Screen Mirroring The Screen Mirroring function lets you view the screen of your smart phone or smart device on the TV you have connected to the home theater system See page 37 Device Name Lets you assign an identifying name to the product You use this name to identify the product when you are connecting external Wi Fi devices smart phones tablets etc to it BD Live Internet Connection Lets you allow or prohibit an Internet connection for the BD Live service System Setup Lets you re run the Setup procedure See page 3 Quick Start
35. ding The radio is recorded at a set default volume even if you change the volume or press the MUTE button during the recording process If you remove the USB device or Power Cable during the recording process the portion of the file which has already been recorded may not play and press the puttan back _ The product searches for a network and then Recording will not start if the remaining free space displays the connection failed message in the USB storage device is less than 2MB amp If the USB device is removed or has insufficient space under 2MB the appropriate message is displayed and the recording stops A Wired Manual If you have a static IP address or the automatic procedure does not work you ll need to set the Network Settings values manually After following Steps 7 to 3 above 7 Inthe Network Settings screen change Network Type to Wired Then select Connect amp If it is possible to connect the home theater to your network wirelessly select Change Network at this point change the Network Type to Wireless and then go to the instructions for wireless networks See page 20 9 English suas Settings gt Network Settings Wired network connection failed MAC Address IP Address Subnet Mask Gateway DNS Server XX XX XX XX XX XX 0 0 0 0 0 0 0 0 ORONO NO 0 0 0 0 Unable to connect to the network Try the following check if your IP address is set correctly in I
36. display Chapter or Title immediately Continue to press the AY buttons until your choice is inside the applicable field To return to normal play press the REPEAT button again press the A Y buttons to select Off and then press the button amp The screen may not display Repeat A B immediately Continue to press the AY buttons until Repeat A B is inside the applicable field amp You must set point B at least 5 seconds of playing time after point A 27 English Playing Content Using the TOOLS Menu During playback press the TOOLS button Title If there is more than one title on a disk or device lets you move to or select a desired title When searching DVD title in stop mode enter the TOOLS button and title number 04 02 you want Playing Time Lets you go to a specific playback point Use the numeric buttons to input the playback point Repeat Mode Lets you repeat a specific title chapter or marked section Audio Sync Lets you adjust the audio delay so that the audio syncs with the video You can set the delay from O to 300 milliseconds Equalizer Mode Set Equalizer Mode on to use the equalizer Equalizer Settings Lets you set the equalizer amp Equalizer Settings only appears when Equalizer Mode is On Picture Settings Lets you set the picture mode Mode User Go to Advanced Settings and then press the button Lets you adjust the Brightness Contrast Color and S
37. e press the J button once The Blu ray menu appears Press the J button again then select 3D Settings in the Blu ray menu e Depending on the content and the position of the picture on your TV screen you may see vertical black bars on the left side right side or both sides TV Aspect Ratio Depending on the disc type some aspect ratios may not be available f you select an aspect ratio and option which is different than the aspect ratio of your TV screen the picture might appear to be distorted f you select 6 9 Original your TV may display 4 3 Pillarbox black bars on the sides of the picture BD Wise Samsung Products only e When BD Wise is on the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu f the product is connected to a device that does not support BD Wise you cannot use the BD Wise function For proper operation of BD Wise set the BD Wise option in both the product and the TV to On Digital Output e Be sure to select the correct Digital Output or you will hear no sound or just loud noise If the HDMI device AV receiver TV is not compatible with compressed formats Dolby Digital DTS the audio signal outputs as PCM Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects e Some Blu ray Discs do not have BONUSVIEW audio and Navigation Sound Effects This Digital Output setup does not affect the analog L R
38. e This function changes both the primary and secondary subtitles at the same time The total number of primary and secondary subtitles respectively is displayed Playing JPEG files You can t enlarge the subtitle and PG graphics in the full screen mode Playing Content Using the TOOLS button while playing pictures f the home theater is connected to a BD Wise compliant TV that has BD Wise On the Picture Settings menu will not appear e The Background Music function will not work unless the music file and the photo file are located on the same storage media Also sound quality can be impacted by the bitrate of the MP3 music file the size of the photos and the encoding method Disk and Format Compatibility Disc types and content your Product can Play Details Media Disc Type Blu ray Disc 3D Blu ray Disc BD ROM or BD RE R disc recorded in the BD RE format DVD VIDEO recorded DVD VIDEO DVD RW DVD RW V VIDEO pvp RW DVD R R discs that DVD R have been recorded and DVD RW finalized or a USB storage DVD R media containing Divx VCD 4 4 MKV MP4 VCD 4 contents Music recorded on CD CD RW R RW R DVD RW R BD MUSIC DVD RW R RE R discs or a USB BD RE R storage media containing MP3 or WMA contents Photos recorded on CD CD RW R RW R DVD RW R BD PHOTO DVD RW R RE R discs or a USB BD RE R storage media containing JPEG contents amp The product
39. efore moving or installing the product be sure to turn off the power and disconnect the power cord Connecting the Speakers Subwoofer Front L Surround L Front Speakers Center Speaker Surround Speakers Subwoofer i Position of the product Place it on a stand or cabinet shelf or under the TV stand Front R Selecting the Listening Position The listening position should be located about 2 5 to 3 times the TV s screen size away from the TV Surround R Product For example if you have a 46 inch screen locate the listening position 2 92 to 3 50 meters from the screen Place these speakers in front of your listening position facing inwards about 45 toward you Place the front speakers so that their tweeters will be at the same height as your ear Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers It is best to install the center speaker at the same height as the front speakers You can also install it directly over or under the TV Place these speakers to the side of your listening position If there isn t enough room place these speakers so they face each other Position them about 60 to 90cm above your ear facing slightly downward Unlike the front and center speakers the surround speakers are used mainly for sound effects Sound will not come from them all the time
40. en press the TUNING UP DOWN button to oress the button select the station you want to record 2 Select Network and then press the button 3 Press the RED A button to start recording The 3 Select Network Settings and then press the recording process begins button e The recorded time is displayed on the left and the recording time still available based on the amount of free space in the USB storage device is displayed on the right 4 Goto the instructions for Wired networks starting below or the instructions for Wireless networks See page 20 4 Press the EXIT button to finish your recording Wired Network The recording is stopped and saved as an mp3 file at the same time To play the recorded file Q Wired Automatic refer to Playing Files on a USB Device After following Steps to 3 above D The recorded file Is saved in the Tuner folder which Inthe Network Settings screen change is created automatically Network Type to Wired Then select Connect 3 Only the OPEN CLOSE tt POWER EXIT and press the button The product detects MUTE and VOLUME buttons are operable the wired connection verifies the network while FM radio is being recorded connection and then connects to the network amp If you don t press any buttons while recording the 2 When itis done highlight OK and then press screen saver will be enabled button Sound effects such as DSP EQ etc are not recorded during FM radio recor
41. er audio is produced by the TV speakers HDMI audio e When HDMI audio is output to the TV speakers it is automatically down mixed to 2 channels Audio Return Channel When Anynet HDMI CEC is Off the Audio Return Channel function is not available e Using an HDMI cable not certified for ARC Audio Return Channel may cause a compatibility problem e The ARC function is only available if an ARC compliant TV is connected Playback Playing Video files e Video files with high bitrates of 2OMbps or more strain the product s capabilities and may stop playing during playback Selecting the Audio Language e The lt gt indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings The languages available through the Audio Language function depend on the languages that are encoded on the disc This function or certain languages may not be available e Some Blu ray Discs may allow you to select either the PCM or Dolby Digital audio English soundtrack Selecting the Subtitle Language Depending on the Blu ray Disc DVD you may be able to change the subtitle language in the Disc Menu Press the DISC MENU button e This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu ray Discs DVDs Information about the main feature BONUSVIEW mode will also appear if the Blu ray Disc has a BONUSVIEW section
42. er System Front Surround Center Subwoofer Weight Dimensions Operating Temperature Range Signal noise ratio Usable sensitivity Total harmonic distortion Video 90 kg 430 0 W x 55 0 H x 224 0 D mm 5 C to 35 C 0 to 75 55 dB I2 dB I 0 7080p 080i 720p 576p 480p Audio PCM multichannel audio Bitstream audio PCM audio Front speaker output T65W x 2 30 Center speaker output 770W 3Q Surround speaker output T65W x 2 30 Subwoofer speaker output 770W 30 Frequency response 20Hz 20kHz 3dB S N Ratio 7008 Channel separation 60dB Input sensitivity AUX 500mV Speaker 5 ch speaker system Dimensions Impedance Frequency range Rated input m i x ae br 83 4 x 053 0 x 07 0 3 45 Stand base 0255 0 65W 200Hz 20kHz 83 4 x 053 0 x 07 0 30 2 98 Stand base 0255 0 268 8 x 87 6 x 0 0 0 58 Ir7OW 20Hz 200Hz 220 6 x 380 6 x 364 7 6 50 amp Network speeds equal to or below TOMbps are not supported amp Samsung Electronics Co Ltd reserves the right to change the specifications without notice amp Weight and dimensions are approximate amp Design and specifications are subject to change without prior notice amp For the power supply and Power Consumption refer to the label attached to the product amp For India Only This product is ROHS compliant 47 English xipueddy Appendix Q DOLBY TRUET Manufactured under license from Dolby Labo
43. f up to 0 meters in all directions if there are no obstacles The connection will be automatically cut off if the device is out of this range Even within this range the sound quality may be degraded by obstacles such as walls or doors e This wireless device may cause electrical interference during its operation To Connect the Home Theater to a Bluetooth Device Connect Bluetooth device Before you begin confirm that the Bluetooth device supports the Bluetooth compliant stereo headset function I Press the FUNCTION button on the remote control to display the BT message 2 Select the Bluetooth menu on the Bluetooth device you want to connect For instructions refer to the Bluetooth device s manual 3 Select HTS JXXXXX from the list e When the Home Theater is connected to the Bluetooth device the device name of the connected Bluetooth device followed by the name of the home theater will appear on the front display of the home theater 4 Play music on the connected device e You can listen to the music playing on the connected Bluetooth device over the Home Theater system amp The Home Theater only supports Middle Quality SBC data up to 237kbps 48kHz and does not support High Quality SBC data B28kbps 44 kHz amp The AVRCP feature is supported It s functionality will differ depending on the specifications of the connected device Connect only to a Bluetooth device
44. from abroad may not be playable CD ROMs and DVD ROMs cannot be played on this product Make sure that the rating level is correct Are you using a deformed disc or a disc with scratches on the surface Wipe the disc clean The home theater does not play sound during fast playback slow playback and step motion playback Are the speakers connected properly Is the speaker setup correctly customized Is the disc severely damaged On certain Blu ray DVD discs sound is output from the front speakers only Check if the speakers are connected properly Adjust the volume When playing audio from a CD the radio or a TV the unit outputs sound to the front speakers only 44 English Symptom Dolby Digital 5 CH Surround Sound is not produced The remote control does not work The disc is rotating but there is no picture Picture quality is poor and the picture is shaking Audio language and subtitles do not work The menu screen does not appear even when you select the menu function The aspect ratio cannot be changed e The product is not working Example The power goes off or you hear a strange noise The Product is not working normally You have forgotten the rating level password Can t receive radio broadcasts There is no sound when you try to listen to TV audio through the home theater speakers Check Remedy Is there Dolby Digital 5 CH mark on the disc Dolby Digital 5
45. function unless necessary Is the antenna connected properly If the antenna s input signal is weak install an external FM antenna in an area with good reception If you press the amp button while listening to TV audio using the 0 IN or AUX functions the Blu ray DVD disc functions are turned on and the TV audio is muted 45 English Appendix Symptom Not Available appears on screen If the HDMI output is set to a resolution your TV cannot support for example 080p you may not see a picture on your TV No HDMI output Abnormal HDMI output appears on the screen DLNA function You can see folders shared through DLNA but cannot see the files Video plays intermittently The DLNA connection between the TV and PC is unstable BD LIVE The home theater cannot connect to the BD LIVE server When using the BD LIVE service an error occurs Check Remedy The feature is unavailable or the action cannot be completed at this time because The Blu ray DVD disc s software restricts it 2 The Blu ray DVD disc s software doesn t support the feature e g angles 3 The feature is not available at the moment 4 You ve requested a title or chapter number or search time that is out of range Press and hold the J button on front panel for more than 5 seconds with no disc in the product All settings will revert to their factory settings Check the connection between the TV and the HDMI jack
46. harpness functions manually Dynamic Choose this setting to increase sharpness Normal Choose this setting for most viewing applications Movie This is the best setting for watching movies Menu selections that appear only when a BD DVD disc plays Chapter Lets you move to a chapter that you want to watch Audio Lets you set the desired audio language Subtitle Lets you set the desired subtitle language Angle To view a scene from another angle The Angle option displays the number of angles available to view 7 2 I 3 etc BONUSVIEW Video BONUSVIEW Audio Lets you set the desired Bonusview option Menu selections that appear only while a file plays Full Screen Lets you set the desired full screen size You can select Original Mode larger and Mode2 largest Information Select to view video file information Depending on the disc or storage device the Tools menu may differ All options may not be displayed 28 English Creating a Video Playlist You can create a playlist of video files in nearly the same way you create a playlist of music files See page 30 for instructions Select video files instead of music files Playing a Pre Recorded Commercial Audio Disc 7 Insert an Audio CD CD DA or an MP3 Disc into the disc tray e For an Audio CD CD DA the first track will be played automatically Tracks on a disc are played in the order in which they were recorded on
47. he J button 2 Select Support and then press the button 3 Select Software Upgrade and then press the button 4 Select one of the following methods e By Online By USB e Auto Upgrade Notification 5 Press the button Directions for each method begin below If you want to cancel the upgrade while the upgrade software is downloading press the button By Online Your product must be connected to the Internet to use the By Online function Remove all discs before you begin 7 Select By Online and then press the button The Connecting to Server message appears 2 lf an update is available a popup message appears asking if you want to upgrade If you select Yes the product turns off automatically turns on and then begins the upgrade 3 The update progress popup appears When the update is completed the product turns off automatically again 4 Press the POWER button to turn on the product By USB 7 Visit Samsung s website on a computer and download the update package to a USB device Save the update package in the USB device s top level folder Otherwise the product will not be able to locate the update package 2 Connect the USB device with the update package to the product 3 Select Support gt Software Upgrade gt By USB The software is updated using the update package on the USB device There should be no disc in the product when you upgrade the software using the USB Host ja
48. he 8 or Fast Gg button Motion Each time you press the BJ or D Play button the playback speed will change Slow In pause mode press the O button eee Each time you press the amp button y the playback speed will change Saye In pause mode press the W Motion button Play Each time you press the i button a new frame appears During playback press the B or Skip ES button Motion Each time you press the or Play Gg button the disc moves to the previous or next chapter or file Using the disc menu title menu popup menu and title list DISC MENU During playback press this button to display the Disc menu TITLE MENU During playback press this button to display the Title menu e f your disc has a playlist press the GREEN B button to go to the playlist POPUP MENU During playback press this button to display the Popup menu Repeat Playback I During playback press the REPEAT button on the remote control 2 Press the AY buttons to select Off Title Chapter All or Repeat A B and then press the J button U9 U0D bulkeld i A Repeat A B 7 Press the amp button at the point where you want repeat play to start A 2 Press the amp button at the point where you want repeat play to stop B 3 To return to normal play press the REPEAT button again 4 Press the J button Depending on the disc the screen may not display all repeat options 3 The screen may not
49. ice s manual 2 Once connected the home theater will turn itself on automatically in BT mode Select the desired music to play on your smart device Using the Special Effects Remote Control Buttons vw SOUND If you have a TV that supports Anynet HDMI CEC the TV SOUND button lets you direct the TV s audio to the Home Theater Speakers or the TV Speakers To use this function follow these steps TV SOUND 4 Connect an HDMI cable to the TV and home theater See page 2 Set Anynet HDMI CEC On in the home theater and TV 3 Press the TV SOUND button on the remote control TV SOUND ON flashes on the display on the front panel and then changes to D IN e When TV SOUND is on TV audio outputs through the Home Theater speakers 4 Press the TV SOUND button again to turn TV SOUND off e When TV SOUND is off TV audio outputs through the speakers of the connected Anynet TV KE English uso bulkeld i Playing Content 3 Use TV SOUND f When you want to listen to the TV s audio through the home theater speakers 2 When you want to listen to the audio from a USB device plugged into the TV through the home theater speakers A TV SOUND ON OFF support specifications Anynet HDMI CEC TV Sound ON TV Sound OFF Setting HTS Speaker HTS Speaker Output Mute ON TV Speaker TV Speaker Mute Output HTS Speaker HTS Speaker Output Mute OFF TV Speaker TV Speaker Output Output HTS S
50. ides contact information for assistance with your product View the general disclaimer regarding third party contents and services 3 Press the TUNER MEMORY button the yellow C button at the bottom of the remote RESO 4 Press the TUNER MEMORY button again Reverts all settings to their defaults except for the within about 5 seconds The station is stored in network Requires that you enter your security PIN MN The default security PIN is 0000 amp If you press the TUNER MEMORY button repeatedly without changing the station the inputted station may be overwritten 5 To preset another station repeat steps 2 to 4 e To tune in to a preset station press the TUNING UP DOWN button 8 English amp To delete all Preset FM stations at once press the Network Setup TITLE MENU button for about 5 seconds in FM Network Setup Manual mode until DEFAULT PRESET appears When you connect this product to a network you on the display can use network based applications and functions C th t ft Recording FM Radio such as BD LIVE and upgrade the product s software through the network connection You can record your favorite radio broadcast on a USB storage device Configuring Your Network Connection 7 Insert a USB device into the USB jack on the To begin configuring your network connection follow front of the product these steps 2 Press the FUNCTION button to select FM and J Inthe Home screen select Settings and then th
51. inet unless proper ventilation is provided Do not place this apparatus near or over a radiator or heat register or where it is exposed to direct sunlight Do not place vessels vases etc containing water on this apparatus A water spill can cause a fire or electric shock Do not expose this apparatus to rain or place it near water near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc If this apparatus accidentally gets wet unplug it and contact an authorized dealer immediately This apparatus uses batteries In your community there might be environmental regulations that require you to dispose of these batteries properly Please contact your local authorities for disposal or recycling information Do not overload wall outlets extension cords or adaptors beyond their capacity since this can result in fire or electric shock Route power supply cords so that they are not likely to be walked on or pinched by items placed on or against them Pay particular attention to cords at the plug end at wall outlets and the point where they exit from the apparatus To protect this apparatus from a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the set due to lightning and power line surges Before connecting the AC power cord to the DC adapt
52. ing Photo Content Using Karaoke Using Bluetooth Using the Special Effects Remote Control Buttons 4 En glish 35 35 35 36 37 38 39 44 47 48 NETWORK SERVICES Using BD LIVE Using DLNA Apps Using Opera TV Store Screen Mirroring APPENDIX Additional Information Disk and Format Compatibility Troubleshooting Specifications Licenses Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Getting Started Check the box for the accessories and speaker components listed or shown below Accessories Remote Control e User Manual Batteries AAA size Power Cable FM Antenna HDMI Cable Speaker Components Screw 5x75 x 4 Center Screw 5x20 x 6 Speaker Cable x 6 Front x 2 Stand x 4 Stand Base x 4 Surround x 2 Subwoofer 5 En glish papes Buije5 f Getting Started DISPLAY ICONS PLAY PAUSE VOLUME CLOSE CONTROL POWER SAMSUNG FT REMOTE CONTROL SENSOR DISC TRAY MIC JACK 3 When the product is on do not let children touch the product s surface It will be hot To upgrade the product s software through the USB jack you must use a USB flash drive amp When the product displays a Blu ray Disc menu you cannot start the movie by pressing the amp button on the product or the remote To play the movie you must select Play Movie or Start in the disc menu and then pres
53. le 0 seconds after the Home menu appears on the screen ol English U9 U0D 5 i Playing Content You can use a Bluetooth device to enjoy music with high quality stereo sound all without wires e Pairing distance max 2M Operating distance max 0M e Actual Bluetooth performance may differ depending on your environment even if you use your Bluetooth device within the specified operating distance What is Bluetooth Bluetooth is a technology that enables Bluetooth compliant devices to interconnect with each other easily using a short wireless connection e A Bluetooth device may hum or malfunction When a part of your body is in contact with the receiving transmitting system of the Bluetooth device or the Home Theater When the device is subject to electrical variation from obstructions caused by a wall corner or office partitioning When the device is exposed to electrical interference from same frequency band devices including medical equipment microwave ovens and wireless LANs e Pair the Home Theater with the Bluetooth device while the two are close together e The further the distance is between the Home Theater and the Bluetooth device the worse the quality is If the distance exceeds the Bluetooth operational range the connection is lost n poor reception sensitivity areas the Bluetooth connection may not work properly e The Home Theater has an effective reception range o
54. may not play certain CD RW R and DVD R because of the disc type or recording conditions 39 English xipueddy Appendix amp If a DVD RW R disc has not been recorded properly in DVD video format it will not be playable amp Your product will not play content that has been recorded on a DVD R at a bitrate that exceeds I0 Mbps Your product will not play content that has been recorded on a BD R or USB device at a bitrate that exceeds 30 Mbps amp Playback may not work for some types of discs or when you use specific operations such as angle change and aspect ratio adjustment Information about the discs is written in detail on the disc box Please refer to this if necessary amp When you play a BD J title loading may take longer than a normal title or some functions may perform slowly Disc Types your Product cannot Play e HD DVD e DVD RAM e DVD ROM PD MV Disc Super Audio CD etc except CD layer 3 9 GB DVD R Disc for Authoring DVD RW VR mode e CVD CD ROM CDV CD G CD I LD CD Gs play audio only not graphics amp This product may not respond to all operating commands because some Blu ray Disc DVD and CD discs allow specific or limited operation and provide only certain features during playback Please note that this is not a defect in the product amp Samsung cannot guarantee that this product will play every disc bearing the Blu ray Disc DVD or CD logo because disc formats
55. n with greater color depth Progressive Mode Lets you improve picture quality when viewing DVDs Sound Karaoke Scoring This feature rates your singing ability and gives you a score for each song you sing My Karaoke Set the volume of the vocals when using the karaoke feature Original Vocals Volume is set to the level of the original sound Reduce Vocals Volume is set to a level lower than that of the original sound Speaker Settings Lets you adjust the following speaker settings and turn the speaker test on and off so you can test the speakers Level Lets you adjust the relative loudness of each speaker from 6dB to 6dB For example if you like deep bass you can increase the loudness of the subwoofer by 6dB Distance Lets you adjust the relative distance of each speaker from the listening position up to 9 meters The farther the distance the louder the speaker will be Speaker Test Lets you run the Speaker Test function so you can test your adjustments Setting Speaker Test to On turns the Speaker Test on Setting it to Off turns it off Speaker Selection Lets you select which speakers you want active either the TV s speakers or the home theater s speakers Equalizer Mode Set Equalizer Mode on to use the equalizer Equalizer Settings Lets you set the equalizer amp Equalizer Settings only appears when Equalizer Mode is On Audio Return Channel Lets you direct the s
56. ndix Video File Support File Extension Container Video Codec Audio Codec Resolution DivX 3 74 4 5 6 avi AVI MP4v3 H 264 BP MP HP VC 4 AP DivX 5 6 MP3 Dolby Digital DT H 264 BP MP HP Se ee Dis MP3 Dolby Digital DTS WMA PCM mkv WMV VC 4 AP head MP4 mp4v ue H 264 BP MP HP MPEG MPI 2 mpg mpeg PS MPEG2 Dolby Digital DTS H 264 BP MP HP Limitations Even when a file is encoded by a supported codec listed above the file might not play if its content has a problem Normal playback is not guaranteed if the file s container information is wrong or the file itself is corrupted Files having a higher bitrate frame rate than standard may stutter during sound video playback The Seek skip function is not available if the file s index table is damaged Video decoder Supports up to H 264 Level 4 and AVCHD Does not support H 264 FMO ASO RS and SP MP AP L4 MPEG4 SP ASP Below 280 x 720 60 frames max Above I280 x 720 30 frames max Does not support GMC 2 or higher Audio decoder Supports WMA 7 8 9 and STD Does not support WMA sampling rate of 22050Hz mono AAC Max sampling rate 96Khz 8 7 2 6 22 24 32 44 48 64 88 2 96 Max bitrate 320kbps Supported DivX subtitle file formats SM Sit gt SUB txt Music File Support File Extension Audio Codec Support Range MP3 mp3 Sampling rates in KHz
57. nly DTS and Dolby Digital audio MPEG audio a bitstream format is not supported Selecting an External Device to Use To select an external device after you have connected it press the FUNCTION button Each time you press the button the mode changes in this order BD DVD D IN AUX gt FM BT I7 English Connections You can connect your product to your network router using one of the methods illustrated below Wired Network D D D D D Broadband modem with integrated router _ Broadband service Route Broadband service Your router or your Internet Service Provider s policies may prevent the product from accessing Samsung s software update server If this occurs contact your Internet Service Provider ISP for more information DSL users please use a router to make a network connection Try to use the CAT 7 cable to connect You cannot use the product if the network speed is slower than TOMbps To use the DLNA function you must connect your PC to your network as shown in the illustrations above The connection can be wired or wireless Wireless Network Broadband service amp If your wireless IP router supports DHCP this product can use a DHCP or static IP address to connect to the wireless network amp Set your wireless IP router to Infrastructure mode Ad hoc mode is not supported The produ
58. o skip backwards or forwards Press to play a disc or files Press to stop a disc or files f KARAOKE HOME REPEAT Press to use the karaoke function Mic vol Echo Key Cotrol Press to move to the Home screen Allows you to repeat a title chapter track or disc Use to display the playback information when playing a Blu ray DVD disc or files Press to use the Tools menu Select on screen menu items and change menu values Return to the previous menu Press to exit the menu These buttons are used both for Use to set a preset radio frequency menus on the product and also several Blu ray Disc functions F Select MONO or STEREO for radio Press to record FM radio broadcasts ss U broadcasts Search for active FM stations and to change channels Press to direct the audio signal to the home theater speakers or TV speaker See page 33 Select the desired DSP EQ audio mode AMSUNG Installing batteries in the Remote Control Make sure to match the and ends of the batteries with Battery size AAA the diagram inside the compartment amp Assuming typical usage the batteries last for about one year amp The remote control can be used up to approximately 7 meters from the product in a straight line En glish Connections This section describes various methods of connecting the product to other external components B
59. oduct s current wired connection a Wireless Automatic Follow the Steps 7 to 3 in Configuring Your Network Connection See page 79 7 Inthe Network Settings screen change Network Type to Wireless The product searches for and then displays a list of the available networks 2 Network Settings Select your network type Wireless network ir Network Type si ap You can connect your BD MIC Home Theater to the internet Please select which KIMING_VTOWER wireless network to use WPS PBC Search Move Select Return 2 Select the desired network and then press the button 3 On the Security Key screen enter your network s security code or pass phrase Enter numbers directly using the number buttons on your remote control Enter letters by selecting a letter with AY lt gt buttons and then pressing button 4 When finished select Done and then press the button The product verifies the network connection and then connects to the network You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem U Wireless Manual If you have a static IP address or the Automatic procedure does not work you ll need to set the Network Settings values manually Follow the Steps 7 to 3 in Configuring Your Network Connection See page 79 7 Inthe Network Settings screen change Network Type to Wireless The product se
60. of the apps the home theater displays two agreements You must accept both agreements to download and use any apps By default the home theater displays four popular apps on the Home screen You can view more apps and change the apps the home theater displays on the Home screen by selecting the More button To start an app highlight the app double click it and then follow the directions displayed on the screen Viewing Additional Apps I Select the More button on the Home screen and then press the button The More Apps screen appears displaying a bank of apps 2 To view additional apps move the highlight to the right or left until another group of apps appears 3 To exit the More Apps screen select Close or press the RETURN button or EXIT button on your remote Changing the Apps Displayed on the Home Screen I Select the More button and then press the button 2 Select the Edit button on the More Apps screen and then press the J button 3 Apps that the home theater displays on the Home page are marked with a check Deselect apps you want to remove from the Home screen by highlighting each app and then pressing the button 4 Select apps by highlighting each app and then pressing the button A check mark appears on each app you select You can have up to four apps selected at a time 5 When done select OK and then press the button The Home screen re appears gt gt To exit an application press the
61. of the product Check if your TV supports 576 4800 7200 080 08092 HDMI input resolution If random noise appears on the screen it means that TV does not support HDCP High bandwidth Digital Content Protection DLNA shows only Photo Music and Movie files It does not display other kinds of files Check if the network is stable Check if the network cable is properly connected and if the network is overloaded IP addresses under the same subnetwork should be unique otherwise IP collision can cause an unstable connection Check if you have a firewall enabled If so disable the firewall function Test whether the network connection is active by using the Network Status function Check whether a USB memory device is connected to the product The memory device must have at least IGB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management See pages 35 and 38 See if the BD Live Internet Connection option is set to Allow All If all above fails contact the content provider or update to the latest firmware The USB memory device must have at least GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management See pages 35 and 38 When the factory default settings are restored all stored user BD data is deleted 46 English Specifications General Operating Humidity Range FM Tuner HDMI Amplifier Speak
62. or outlet make sure the voltage designation of the DC adaptor corresponds to the local electrical supply Never insert anything metallic into the open parts of this apparatus Doing so may create a danger of electric shock e To avoid electric shock never touch the inside of this apparatus Only a qualified technician should open this apparatus e Make sure to plug the power cord in until it is firmly seated When unplugging the power cord from a wall outlet always pull on the power cord s plug Never unplug by pulling on the power cord Do not touch the power cord with wet hands f this apparatus does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center e Maintenance of Cabinet Before connecting other components to this product be sure to turn them off Ifyou move your product suddenly from a cold place to a warm place condensation may occur on the operating parts and lens and cause abnormal disc playback If this occurs unplug the product wait for two hours and then connect the plug to the power outlet Then insert the disc and try to play back again Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time especially when children elderly or disabled people will be left alone in the house
63. ound from the TV to the Home Theater speakers Requires an HDMI connection and an Audio Return Channel ARC compatible TV f Audio Return Channel is set to on and you are using an HDMI cable to connect the product to the TV digital optical input will not work f Audio Return Channel is set to Auto and you are using an HDMI cable to connect the product to the TV ARC or digital optical input is selected automatically Digital Output Lets you set the Digital Output to match the capabilities of the AV receiver you ve connected to the product For more details please refer to the digital output selection table See page 43 Dynamic Range Control Lets you apply dynamic range control to Dolby Digital Dolby Digital Plus and Dolby TrueHD audio Auto Automatically controls the dynamic range of Dolby TrueHD audio based on information in the Dolby TrueHD soundtrack Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus Off Leaves the dynamic range uncompressed letting you hear the original sound On Turns dynamic range control on for all three Dolby formats Quieter sounds are made louder and the volume of loud sounds is reduced 6 English Downmixing Mode Lets you select the multi channel downmix method that is compatible with your stereo system You can choose to have the product downmix to Normal Stereo or to Surround Compatible Audio Sync When the product is attache
64. peaker HTS Speaker No Output Mute Operation TV Speaker TV Speaker Output Output DSP EQ You can adjust the sound with various sound modes DSPOFF Select for normal listening CINEMA Produces realistic and powerful sound for movies MUSIC Suitable for all music sources GAME Revs up video games with powerful and realistic sound M STEREO Multi Stereo Produces surround sound from 2 channel input sources POWER BASS Pumps up the bass sound LOUD Improves bass sound characteristics according to output level NIGHT Optimizes sound for night time listening by compressing the dynamic range and softening the sound USER EQ Provides a user adjustable equalizer 50 you can adjust music to your liking LOCAL EQ It provides a unique EQ curve for fitting to local music 34 English Network Services 7 Connect the product to your network See page 72 2 Configure the network settings See pages 9 2 Once the product is connected to your network you can enjoy various movie related service contents available on BD LIVE compliant discs I Attach a USB memory stick to the USB jack on the front of the product and then use BD Data Management to check its remaining memory The memory device must have at least IGB of free space to accommodate the BD LIVE services 2 Select Settings on the Home screen and then press the J button 3 Select System and then p
65. r and then press the amp button 5 Use the AY lt P buttons to select a file to view or play and then press the button 6 Press the RETURN button one or more times to exit a current screen exit a folder or to return to the Home screen Press the EXIT button to return directly to the Home Screen 7 Goto pages 27 37 for instructions that explain how to control playback of videos music and pictures on a disc Playing Files on a USB Device There are two methods you can use to play or view multimedia files located on a USB device through your product Method If you connect a USB device while the product is turned on I The New device connected pop up appears New device connected STORAGE DEVICE Photos Videos Music Enter Return Move amp If the pop up does not appear go to Method 2 2 Use the AY buttons to select Photos Videos or Music and then press the button Depending on how the contents are arranged you will see either folders individual files or both 3 If necessary use the AY lt P buttons to select a folder and then press the button 4 Select a file to view or play and then press the button 5 Press the RETURN button to exit a folder or the EXIT button to return to the Home screen 6 Goto pages 27 3 for instructions that explain how to control playback of videos music and pictures on a USB device Method 2 If the product is turned on after
66. ratories Dolby and the double D symbol are TRUEST trademarks of Dolby Laboratories DIGITAL PLUS S For DTS patents see http patents dts com Manufactured under license from DTS S disu D Licensing Limited DTS DTS HD the Symbol amp DTS and the Symbol together are Master Audio Essential registered trademarks and DTS HD Master Audio Essential is a trademark of DTS Inc DTS Inc All Rights Reserved This DivX Certified device has passed rigorous testing to ensure it plays DivX video D UX To play purchased DivX movies first register your device at vod divx com Find your HD registration code in the DivX VOD section of your device setup menu DivX Certified to play DivX video up to HD 4080p including premium content DivX DivX Certified and associated logos are trademarks of DivX LLC and are used under license Covered by one or more of the following U S patents 7 295 673 7 460 668 7 575 7 0 7 59 274 d nN a DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or CERTIFIED Certification marks of the Digital Living Network Alliance The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are IS E im trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Oracle and Java are registered trademarks of Oracle and or its affiliates Other names may be trademarks oftheir respective owners Java
67. ress the J button 4 Select BD Data Management and then press the button 5 Select Change Device and then press the button 6 Select STORAGE DEVICE and then press the button 7 Insert a Blu ray Disc that supports BD LIVE Select an item from the list of BD LIVE service contents provided by the disc manufacturer The way you use BD LIVE and the provided contents may differ depending on the disc manufacturer Using DLNA DLNA lets you access and play files located on your PC through your home theater Follow the directions in the DLNA user s guide to set up DLNA on your PC and to tag folders and files you want to share with the home theater To access and play files located on your PC after you have set up DLNA follow these steps 7 Turn on your PC your TV and the home theater 2 Make sure the DLNA Shared server is running on your PC 3 On your home theater select Change Device 4 Use the AY button to select your PC in the Device List 5 Select the kind of file you want to view or play PHOTOS VIDEOS or MUSIC and then press 6 Use the AY lt P button to select the folder with the kind of files you selected and then press E The File List is displayed 7 Select the file you want to view or play and then press You can create Playlists from files on your PC in the same way you create playlists from files on USB devices and discs With a few exceptions you c
68. ress the FUNCTION button to select FM enter the PIN 2 Tune to the desired station r Preset Tuning Press the G button to 2 SINS select PRESET and then press the TUNING Prevents playback of DVDs with a rating above a UP DOWN button to select a preset station specific numerical rating unless you enter the PIN Before you can tune to preset stations you Change PIN must add preset stations to the product s memory Changes the 4 digit PIN used to access security Manual Tuning Press the button to functions select MANUAL and then press the TUNING UP DOWN button to tune in to a lower or General higher frequency e Automatic Tuning Press the J button to Time Zone select MANUAL and then press and hold the TUNING UP DOWN button for a few Lets you specify the time zone that is applicable to ee d seconds to automatically search the band your area Selecting Mono or Stereo Press the MO ST button Software Upgrade e Each time you press the button the sound switches between STEREO and MONO n a poor reception area select MONO for a clear interference free broadcast Support For more information about this function see page 23 Contact Samsung Presetting Stations Example Presetting FM 89 I0 into memory I Press the FUNCTION button to select FM Terms of Service Agreement 2 Press the TUNING UP DOWN button to scroll the FM frequencies and then select lt 89 0 gt Prov
69. roring Device nn 6 re Ek a amp To play or view video photo or music files located on your PC you must connect your home theater and PC to a home network and have c DLNA software installed on your PC See page PLAY DIS y pag 24 and 35 The disc currently in the tray is displayed Press to start playing the disc Accessing the Settings Screen PHOTOS VIDEOS MUSIC I Select Settings on the Home screen and then Play photos videos or music content from a Pies The Settings screen appears Disc USB PC or mobile device 2 Settings Apps 3D Settings l TV Aspect Ratio 6 9 Original Access various for pay or free of charge l applications BD Wise o Resolution Auto Opera TV Store Movie Frame 24Fs Off Access the on line Opera TV Store where you will MEELIS EI A find high quality video streaming music streaming HDMI Deep Color Off gaming and social network apps Progressive Mode Auto More A list of useful and popular apps we recommend 2 To access the menus sub menus and options Depending on your country this menu function on the Settings screen please refer to the may not be supported remote control illustration See page 5 If you leave the product in the stop mode for more than 5 minutes without using it a Screen saver Set up the wireless mirroring function between the appears on your TV If the product Is left in the home theater and a smart phone or tablet
70. rstand the following safety information before using the 3D function e Some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symptom stop viewing 3D TV remove the 3D Active Glasses and rest Watching 3D images for an extended period of time may cause eye strain If you feel eye strain stop viewing 3D TV remove your 3D Active Glasses and rest e A responsible adult should frequently check on children who are using the 3D function If there are any reports of tired eyes headaches dizziness or nausea have the child stop viewing 3D TV and rest Do not use the 3D Active Glasses for other purposes such as general eyeglasses sunglasses protective goggles etc Do not use the 3D function or 3D Active Glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects trip and or fall and cause serious injury e f you want to enjoy 3D content connect a 3D device 8D compliant AV receiver or TV to the product s HDMI OUT port using a high speed HDMI cable Put on 3D glasses before playing the 3D content e The product outputs 3D signals only through an HDMI cable connected to the HDMI OUT port e The video resolution in 3D play mode is limited to the resolution of the original 3D video You cannot change the resolution to your preference e Some functions such as BD Wise
71. s the button If you are using the Internet or are playing content from a USB device on your TV through the home theater you cannot select the BD DVD mode with the FUNCTION button To select the BD DVD mode exit the Internet or stop the content you are playing on the TV and then select the BD DVD mode Plug the microphone jack before using Karaoke function Rear Panel 5 AUX IN FM ANTENNA OOLING FAN HDMI OUT SPEAKERS OUT HDMI OUT SPEAKER OUTPUT EXTERNAL DIGITAL LAN TERMINAL CONNECTORS AUDIO IN OPTICAL POWER CORD Connecting the FM Antenna 7 Connect the supplied FM antenna to the FM ANT Jack 2 Slowly move the antenna wire around until you find a location where reception is good then fasten it to a wall or other rigid surface Maintain a minimum of 0 cm of clear space on all sides of the home theater to ensure adequate ventilation Do not obstruct the cooling fan or ventilation holes This product does not receive AM broadcasts 6 En glish Remote Control Tour of the Remote Control Press to select Home Theater s mode BD DVD D IN AUX a etc To open and close the disc tray Turn the product on and off Adjust the volume e Cut off the sound temporarily Press numeric buttons to operate options papes Buijey Use to enter the Popup menu Title menu Press to search backwards or forwards Press to pause playing Press to view the disc menu Press t
72. sh 205 Samsung Electronics Co Ltd All rights reserved Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Area Contact Centre Web Site Asia Pacific O O Ol eC Se ee CHINA 400 80 5858 www samsung com cn support 3 www samsung com hk support Chinese RONG KUNG 852 3090 4698 www samsu if OE MACAU 0800 333 www samsung com support SINGAPORE I800 SAMSUNG 726 7864 www samsung com sg support AUSTRALIA 300 362 603 www samsung com au support NEW ZEALAND 0800 726 786 www samsung com nz support VIETNAM 800 588 889 www samsung com vn support THAILAND 0 2689 3232 800 29 3232 www samsung com th support MYANMAR 95 0 2399 888 www samsung com support 800 88 9999 MALAYSIA 603 7737477 Overseas contact www samsung com my support INDONESIA OE www samsung com id support 800 0 7267864 PLDT PHILIPPINES 800 8 7267864 Globe landline and Mobile www samsung com ph support 02 422244 Other landline TAIWAN 0800 329999 www samsung com tw support JAPAN 0720 363 905 www samsung com jp support INDIA 800 3000 8282 Toll Free 800 266 8282 Toll Free www samsung com in support BANGLADESH 9672300300 SRI LANKA 9447540540 www samsung com support AEP m m bis WINN AH68 0283IN 00 AH68 0283IN 00
73. ss steps may differ depending on the menu you selected 7 Turnon your TV after connecting the product you will need to enter the code to complete and then turn on the product When you turn the network connection on the product for the first time the product If you have a network with static IP addresses N automatically displays the Setup Language we suggest you select Skip by pressing the a Screen BLUE D button 5 2 Press the AY buttons to select the desired if S you skip network setup here or the setup does language and then press the Eg button not work correctly you can set up the product s 3 Press the button to start function setup network connection later See page 79 28 Setup Network Setup TV Aspect and Network will be set Each setting may be changed later under Settings Select your network type Network Type Wireless Wired EJ Connect Network cable connected Previous amp Select C Previous Skip lt Move Select 4 The TV Aspect Ratio screen appears Press 6 The product verifies the network connection the A Y buttons to select a TV aspect ratio and and then connects to the network When it is then press the button done press the button The Initial settings You have four choices completed screen appears and then the 6 9 Original For widescreen TVs Displays Home screen appears widescreen pictures in their original I6 9 format If you want to display
74. t These chemicals can damage the appearance of the product or erase the printing on the product Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e Do not dispose of batteries in a fire e Do not plug multiple electric devices into the same wall socket Overloading a socket can cause it to overheat resulting in a fire e There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery Replace only with the same or equivalent type WARNING e TO PREVENT THE SPREAD OF FIRE KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES e To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CLASS 7 LASER PRODUCT This product is classified as a CLASS LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Complies with 27CFR 040 40 except for deviations pursuant to Laser Notice No 50 dated June 24 2007 CAUTION e INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM CLASS 4 0 gt 0 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LASER CLASE KLASS PRODUCTO 3D Precautions IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and unde
75. t Mode then use the lt gt buttons to select Off Track or One All or Shuffle and then press the J button Playing Content Creating a Music Playlist 7 Ifyou are playing music from a commercial CD or DVD press the or RETURN button The Music List Screen appears If you are creating a playlist from music on a user created disk or USB device access the Music list as described on page 25 or 26 2 Press the AV lt P buttons to move to a desired file and then press the YELLOW C button to select it Repeat this procedure to select additional files 3 Ifyou want to select all files press the TOOLS button use the AW buttons to select Select All and then press If you want to deselect all files press the TOOLS button select Deselect All and then press 63 MUSIC TRACK 00I f file selected 2 Page TRACK 004 7 TRACK 002 re 05 57 04 27 TRACK 003 TRACK 004 04 07 03 24 TRACK 005 TRACK 006 03 7 03 35 TRACK 007 FT TRACK 008 03 47 03 49 TRACK 009 E TRACK 070 03 53 03 45 CD Change Device Select Tools Jump Page Return 4 lo remove a file from the Playlist move to the file and then press the YELLOW C button 5 Press the button to play the selected files The Playlist screen appears 6 Togo to the Music List press the J or RETURN button 7 To go back to the Playlist press the button amp You can create a playlist with up to 99 tracks on Audio CDs CD DA
76. th the MY APPS designation 36 English Deleting Apps from MY APPS 7 Highlight the MENU button on the top of the My Apps screen and then press the button on your remote 2 Select REMOVE APPS in the menu and then press the button A red rectangle appears around one of the apps 3 Move the rectangle to the app you want to delete and then press the button 4 Repeat this process to delete additional apps 5 When finished select DONE and then press the button 6 Press the RETURN button to go back to the Main screen Searching for Apps I Select SEARCH at the top of the screen and then press the button 2 To search quickly for popular items click one of the popular search tabs at the top of the screen 3 To search for an app by name enter the app name using the onscreen keyboard Opera TV Store will search as you type and display apps with names that match the letters you enter To cancel a current search press the RETURN button on your remote or select BACK on the screen and then press Screen Mirroring Screen Mirroring lets you display the screen of a smart phone or other compatible device on the TV screen using Miracast technology Screen Mirroring does not require a cable or a wireless router From the Home screen use the 4b buttons to select Screen Mirroring and then press Launch AllShare Cast on your smart phone or device On your device find the name of the home
77. that supports the A2DP Profile 3 Only one Bluetooth device can be paired at a time The search or connection functions may not work properly in the following cases If there a strong electric field near or around the home theater f several Bluetooth devices are simultaneously paired with product 32 English If the Bluetooth device is turned off not in place or malfunctions Note that such devices as microwave ovens wireless LAN adapters fluorescent lights and gas stoves use the same frequency range as the Bluetooth device and can cause electric interference amp For the best operational compatibility between the home theater and a Bluetooth device or any other device such as a Mobile Phone we recommend you update the device s OS to the latest version To Disconnect the Bluetooth Device from the Home Theater You can disconnect the Bluetooth device from the Home Theater For instructions refer to the Bluetooth device s manual e When the Home Theater is disconnected from the Bluetooth device the Home Theater will display DISCONNECTED on the front display To Disconnect the Home Theater from the Bluetooth Device Theater to switch from BT to another mode or turn off the Home Theater Except when you disconnect the Home Theater by changing functions the connected Bluetooth device will wait a certain amount of time for a response from the Home Theater before terminating the connection Disconnec
78. the Setup screen again and 4 3 pictures the old standard format in 4 3 pillar box format with black bars on the left and right 6 9 Full For widescreen TVs Displays widescreen pictures in their original 6 9 format and expands 4 3 pictures to fill the 6 9 screen 4 3 Letter Box For older standard screen analog TVs Displays 4 3 pictures in full screen and 6 9 pictures in letter box format that retains the 6 9 aspect ratio but puts black bars above and below the picture and make changes select the Reset option See page 8 amp If you use an HDMI cable to connect the product to an Anynet HDMI CEC compliant Samsung TV and 7 You have set the Anynet HDMI CEC feature to On in both the TV and the product and 2 You have set the TV to a language supported by the product the product will select that language as the preferred language automatically I3 English Settings The Home Screen at a Glance Change Device Displays a list of external devices connected to the main unit Switch to the desired device DISC PHOTOS VIDEOS Function Use for switching to an external device and for radio and mode switching for a Bluetooth connection You can use the remote control s FUNCTION button and the main unit s 3 button for mode switching Settings Set various functions to suit your personal BEEEEOE GREE pi App2 App3 App4 OperaTV More Screen Change Function Settings preferences Store Mir
79. tion time may differ depending on the Bluetooth device In Bluetooth connection mode the Bluetooth connection will be lost if the distance between the Home Theater System and the Bluetooth device exceeds I0 meters When the Bluetooth device comes back into effective range or you restart the Bluetooth device you will have to pair the device and home theater again to reconnect amp In Bluetooth mode the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes To reconnect the Bluetooth device turn off the screen saver and then connect the device To turn off the screen saver press any button on the remote control the Volume button a number button etc Using the Bluetooth Quick Start When the home theater is turned off connecting your smart device to the product via a Bluetooth connection can turn the home theater on amp The Quick Start function is available when the home theater s power cord is plugged into an AC wall outlet To use this function set Settings gt System gt Quick Start to On amp To use this function the Bluetooth connection between the home theater and your smart device should have been established before In other words the home theater should be found on the list of Bluetooth devices your smart device has already connected to 7 Connect your smart device to the product via Bluetooth For information on Bluetooth connections refer to your smart dev
80. wan Korea the Philippines Indonesia Hong Kong DVD VIDEO Mexico South America Central America Australia New Zealand Pacific Islands Caribbean Russia Eastern Europe India North Korea Mongolia China eje B Ifthe Region number of a Blu ray Disc DVD does not correspond to the Region number of this product the product cannot play the disc AVCHD Advanced Video Codec High Definition e This product can play back AVCHD format discs These discs are normally recorded and used in camcorders The AVCHD format is a high definition digital video camera format e The MPEG 4 AVC H 264 format compresses images with greater efficiency than the conventional image compressing format e Some AVCHD discs use the x v Color format This product can play back AVCHD discs that use the x v Color format x v Color is a trademark of Sony Corporation e AVCHD and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co Ltd and Sony Corporation Some AVCHD format discs may not play depending on the recording conditions AVCHD format discs need to be finalized amp x v Color offers a wider color range than normal DVD camcorder discs amp Some DivX MKV and MP4 format discs may not play depending on their video resolution and frame rate Supported Formats Notes on the USB connection Your product supports USB storage media MP3 players digital cameras and
81. you connect a USB device 7 Turn the product on 2 Press Change Device and select a USB device 3 Use the lt P buttons to select PHOTOS VIDEOS or MUSIC on the Home screen and then press the button 4 If necessary use the AY lt P buttons to select a folder and then press the button 5 Select a file to view or play and then press the button 6 Press the RETURN button to exit a folder or the EXIT button to return to the Home screen 7 Goto pages 27 3 for instructions that explain how to control playback of videos music and pictures on a USB device amp If you insert a disc while playing a USB device or phone the device mode changes to Disc automatically If your cellular phone is DLNA compatible you can play content on the phone without connecting a USB cable See page 35 26 English Controlling Video Playback You can control the playback of video content located on a Blu ray DVD disc USB device mobile device or PC Depending on the disc or contents some of the functions described in this manual may not be available Buttons on the Remote Control used for Video Playback Han DISC MENU FE TITLE MENU ROGA o CB _ a gt z Playback related buttons The product does not play sound in Search Slow or Step mode To return to normal speed playback press the O button Starts playback oO Stops playback Pauses playback During playback press t

Samsung 1000 W 5.1Ch Blu-ray Home Entertainment System J5550 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents