Samsung SM-352N دليل المستخدم
Contents
1. Do not use cracked distorted or damaged discs In particular a disc with a crack on the inner tracks may break while in use SAMSUNG DIGITal everyone s invited Safety Precautions Never allow food particles or foreign substances to enter the drive casing To protect against the risk of fire do not spill such liquids as alcohol and benzene on the drive Do not disassemble attempt to repair or modify the device without express approval as directed in the manual To reduce the risk of damage electric shock and fire SAMSUNG DIGI lal everyone s invited Introduction 1 23 1 Emergency eject hole If the compartment does not open when you press the Eject button power off the computer insert a pin or unfolded paper clip in the hole and push firmly Indicator Light Eject button A N Disc compartment The compartment opens and closes automatically when you press the Eject button Design and specifications are subject to change without prior notice SAMSUNG DIGITal everyone s invitedm Introduction 1 Two pin digital audio output terminal for use with a sound a MPEG card supporting digital audio features 2 Four pin sound output terminal for use with a sound card refer to the sound card documentation for further details 3 Master slave select terminal 4 40pin host E IDE interface connector 5 4pin power terminal A 5V DC B 12V DC2. SAMSUNG DIGITal everyone s invited Setup Installing the COMBO Drive Installing the COMBO Drive f Make sure that the PC is powered off and disconnected from any power source 2 If necessary attach a horizontal bracket to both sides of the drive 3 Remove the cover from a free expansion slot and install the COMBO drive as shown in the illustration SAMSUNG DIGITal everyone s invited Setup Connecting the Cables Connecting the Cables T Connecting the power cable The 4 pin power cable from the internal power unit of your computer must be connected to the power terminal on the rear of the Optical drive Ground A Cut Side Ground 12V DC Note An improperly connected power cable may cause trouble Check the direction of the power connector and the incline side of the Optical drive before connecting 2 Connecting the E IDE cable Insert the IDE cable 40 pin which is connected to the hard disk to the interface terminal Place the red line of the cable close to the Pin 1 When using one E IDE cable Connect the cable to the SL Slave of the Master Slave Select Terminal at the rear of the Optical drive Slave Drive Choose the SL Jumper Hard Drive MainBoard When using two E IDE cable f there is only one Optical drive select MA Master SAMSUNG DIGITal everyone s invited Setup Connecting the Cables a Master Drive Choose the MA Jumpe
3. The COMBO drive is not recognized by MS DOS Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site Http samsung com Http samsung ODD com This case may occur when there is a Windows installation problem reinstall Windows Check whether the audio cable is correctly connected to the sound output terminal on the COMBO drive and the sound card CD IN terminal Check that the sound card is operational Adjust the volume control in Windows Run the CD player supplied with Windows or your sound card Check whether the CD is of good quality and clean it if necessary Check that the power cable is correctly connected Power off and disconnect the PC Insert a pin or unfolded paper clip in the emergency hole and push firmly until the disc compartment opens Adjust the size of the replay screen After checking the display resolution adjust it if necessary The COMBO drive is not detected by Windows No sound is heard from an audio CD A CD is not read or is read too slowly The disc compartment will not open When the MPEG software plays a Video CD the pictures are not regular and the running speed is too slow The Disc is not in message is displayed even though a disc has been inserted The COMBO drive is not detected after it is connected to a sound card The computer may not recognize the disc if you start playback too quickly after inse
4. Use an E IDE cable which has the specified length 46cm Using E IDE cables longer than 46cm may cause errors during data transaction Use only one recording software program To install a software program for recording uninstall any other types or versions of recording software programs first and then reboot the computer Make sure you use the recording software CD Nero Burning Rom Roxio Easy CD Creator provided by us Using our software program with others may cause errors in recording Term Description 7 What is Buffer Under Run Every CD RW or COMBO drive records the data that the Host PC wants to record until the data flow ends However if the buffer becomes empty temporarily this may cause errors in recording data What is Auto Run If inserting a CD into a drive the operating system executes the Autorun inf file of the CD automatically What is Super link This function is to check the buffer to see if there are data while recording If the buffer is empty it waits at the address and then restarts recording after the buffer is full You can avoid Buffer Under Run problems by applying the above mentioned principle SAMSUNG DIGITal everyone s invitedm Troubleshooting Caution with errors Recommended Disc Types CD R MCC PRO TDK FUJI SKC MAXELL MPO BEALL CD RW RICOH SONY MITSUBISHI NANYA General DMA Installation Guide Windows 98 Me Important Please read the entire DMA instal
5. Make the C SAMSUNG directory Copy the files from the diskette to the C SAMSUNG directory To do so type COPY D Ddriver C SAMSUNG after the C prompt and press Enter Edit the CONFIG SYS file Add the DEVICE C SAMSUNG SSCDROM SYS D SSCD000 V entry LETERE F SoS Pe ee ee GWE so a ee a Edit the AUTOEXEC BAT file Add the C SAMSUNG MSCDEX D SSCD000 entry DU AM S i a eS a Reboot the computer SAMSUNG DIGITal everyone s invited Using the Drive Using the COMBO Drive Using the COMBO Drive To play audio or video CDs and or DVDs in your COMBO drive proceed as follows ek Push the power button and boot the computer 7 2 3 i Play the disc CD DVD 5 pressing the Eject button The indicator light comes on Accessories e The type of accessories varies depending on product model D S Audio cable User Manual amp Setup Guide Software Playing DVDs or Video CDs Set up and run the SOFT MPEG program supplied as an accessory After booting the computer open the disc compartment by pressing the Eject button Insert the disc CD DVD with the label on the disc facing upwards and close the disc compartment by Pe Screws SAMSUNG DIGITal everyone s invited Using the Drive Storing and Cleaning Your Discs Storing and Cleaning Your Discs To ensure a long service life for your discs and drive follow the pre cautions below when storing
6. SAMSUNG DIGITal everyone s invited Index I Main Page Safety Precautions Notational Installation While Operating Other Introduction Front Rear Setup Installing the COMBO Drive Connecting the Cables Installing the CD Record Utility Installing the Device Driver Setting Up the Device Driver Using the Drive Using the COMBO Drive Storing and Cleaning Your Discs Upgrading the Firmware Flash Memory System Requirements Troubleshooting Solving Recording Problems Caution with errors Solving Technical Problems IE Specifications SAMSUNG DIGITal everyone s invited Safety Precautions Notational The following are bosit peecaulions bo enswre weer saleby and rebate the risk of propery damage Piaade read this carefully and follow the precauliona at All times dor prope woe of lhe device Warning Caution Warning This symbol indicates explanations about extremely dangerous matters If users ignore this symbol and handle the device the wrong way serious injury or death could result Caution This symbol indicates explanations about dangerous matters If users ignore this symbol and handle the device the wrong way damage to home or property could result Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment Prohibited Important to read and understand at all times Do not disassemble Any change or modificatio
7. and cleaning your discs Do not place a disc in direct sunlight Store a disc vertically in a well ventilated and stable location Do not write or attach a label on a disc Do not drop a disc or place heavy objects on it Do not touch the surface of a disc hold it by the edges To clean a disc polish lightly from the inside of the disc to the outside with a soft cotton cloth Oh h Gy A Do not leave the disc compartment open when you are not using it SAMSUNG DIGITal everyone s invited Using the Drive Upgrading the Firmware Flash Memory Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site Http samsung com Http samsung ODD com SAMSUNG DIGITal everyone s invitedm Using the Drive System Requirements System Requirements Before you install the COMBO drive we strongly recommend that you check that your setup meets the system requirements listed below Item Description o O Intel Pentium II 400MHz Celeron 466A or higher 128 MB of RAM or higher with omputer an 80pin IDE interface for Ultra DMA Windows version Windows 98 2000 ME XP NT4 0 or higher For Windows NT we recommend Service Pack2 and Version is over 4 00 1381 MS DOS 5 0 or higher For MS DOS The CD R CD RW driver can only read a disc without premaster Software PC with Windows 98 2000 ME XP NT4 0 DVD Video playback sof
8. ayed on the screen to install the utility Refer to the separate utility documentation for further details a Store the utility disc in a safe place SAMSUNG DIGITal everyone s invited Setup Installing the Device Driver Installing the Device Driver No additional device driver is needed for Windows 98 2000 ME XP NT4 0 as the default Windows device driver is used You can check that the COMBO drive has been correctly detected by Windows To do so proceed as follows 1 2 3 4 5 Double click on the My Computer icon on your desktop Double click on the Control Panel folder Double click on the System icon Click on the Device Manager tab Expand the CD ROM branch The SAMSUNG COMBO SM device name is displayed The SAMSUNG device driver enables discs in the COMBO drive to be read but not recorded in an MS DOS environment the driver is located in the D driver folder on the CD record utility disc SAMSUNG DIGITal everyone s invited Setup Setting Up the Device Driver Setting Up the Device Driver Automatic Setup The device driver is located in the Ddriver folder of the CD Record Utility disc which is provided in the package ano Insert the CD Record Utility disc into the CD ROM drive and open the Ddriver folder Run the CDSETUP EXE file in the Ddriver folder When Setup is successfully completed click OK button or press the Enter key Reboot the computer Manual Setup
9. er feature START PROGRAMS ACCESSORIES SYSTEM TOOLS DISC DEFRAGMENTER Decompress the hard disk if it is compressed a0 NM Make sure that the space available on the hard disk is at least twice the size of the largest file to be recorded on the disc If you wish to record more than 1000 small files e First create an image file and copy the image file to the disc e Choose the low record speed e Compress small files and then record them Network Drive T Copy the network drive contents to the hard disk and then from the hard disk to the COMBO drive CD ROM Drive T Clean the source CD if necessary 2 Create an image file and then copy the image file to the COMBO drive 3 Check the CD ROM drive record speed There are two recording methods e Low speed file by file e High speed transfer of an image file from the hard disk f If the transfer speed of the CD ROM drive is slower than the record speed reduce the record speed Note The COMBO Drive provide a High Speed rewriting Disc recording function CD RW 24X 32X To rewrite at a High speed use the disc which High Speed is printed on Ultra Speed 16X 24X 32X High Speed RW supporting 10X General RW supporting 4X SAMSUNG DIGITal everyone s invitedm Troubleshooting Caution with errors Caution with errors gt Term Description Recommended Disc Types Caution with errors Every CD RW or COMBO drive records data by a
10. lation guide before installing your COMBO drive About DMA Installation For stable writing performance at high speeds Installation of DMA transfer mode for E IDE ATAPI interface is strongly recommended We recommend DMA mode for fast writing DMA Setting Before you install your COMBO drive we recommend to set DMA to enabled on your PC system See the following procedure to set DMA transfer mode in windows oprerating system Windows 98 ME Click on START Select your COMBO drive Click on Settings Click on the Properties button Select Control Panel Click on the Settings tab Check the DMA checkbox to enables DMA Click OK Select the Device Manager panel in System Properties Restart your PC Expand the CD ROM icon Windows 2000 XP Select the DMA mode by selecting Start gt Setting gt Control Panel gt System gt Device Manager gt IDEATA ATAPI Controller gt Default Assistant IDE Channel Advanced Information Select the System Icon SAMSUNG DIGITal everyone s invited Troubleshooting Solving Technical Problems oe Liei The COMBO drive is not detected by the computer Check that the power audio and IDE cables are correctly connected to the computer After installing the COMBO drive the PC gets slower Change the IDE cable and reconnect it to the computer Preferably connect a second IDE cable to the COMBO drive in master mode Check the position of the jumper in the master slave select terminal
11. motor Spindle motor Brushless motor Tray DC motor Soft Eject Horizontal Vertical FRONT PANEL Green Reading Recording Status REAR PANEL OPERATING 750g dicator perations 148 2 W x 42 H x 184 D mm including bezel GENERAL Net weight RELIABILITY MTBF 125 000 POH Duty 20
12. n not expressly approved by designated qualified personnel could avoid your authority to operate this device Always make sure that the disc does not have a crack before use If the disc has a crack especially around the center hole it is recommended to make a copy immediately and use the copy instead When a cracked disc is used continuously the size of the crack is likely to grow and this will eventually result in irreparable damage to the disc Important to read and understand at all times SAMSUNG DIGITal everyone s invited Safety Precautions Installation o Se See m Place the drive on a level surface Failure to do so may cause the device to fall onto a hard surface resulting in damage or malfunction Do not place the drive in direct sunlight Avoid low or high temperature environments Avoid high humidity environments SAMSUNG DIGITal everyone s invited Safety Precautions While Operating Handle with caution to prevent damage from external shock Do not drop the drive and protect it from severe shocks It can damage the drive or cause it to malfunction Do not move the drive while in operation and do not attempt to open the disc tray byforce Make sure to close all working programs before attempting to open the tray and always use the open close button Do not insert a pin into the emergency opening while in operation
13. pplying recording laser onto a CD If the CD is damaged or recording data is not possible to you need to remove the following causes of the error Itis recommended to set a CD RW or COMBO drive as follows 7 Do not work on a multi tasking environment and remove screen savers If you work on a multi tasking environment while the COMBO drive is recording deleting data Buffer Under Run may occur Do not allow any external access to the Host PC while recording data If another user accesses your printer through a network while you are recording data errors may occur Remove the Auto Run function of the CD If you insert a CD that has the Auto Run function to a drive connected to a PC while recording deleting data this may cause errors How to cancel select the Auto Run function Cancel Select the Auto Run function in Start gt Setting gt Control Panel System gt Device Manager gt CD ROM Setting Use image files when you record many small files If you use a lot of small size files for recording this may reduce the transaction rate of the PC Although Super link function is often run the recording quality may become low If you copy a CD from another you do not require making available space in the hard disk However when you use image files you need to copy them on the hard disk first and then copy to a CD In this case you need to ensure maximum 700MB of available space in the hard disk for reliable recording process
14. r lb Hard Drive c MainBoara Primary 1 Secondly 1 gt If there is two Optical drive select MA Master SL Slave a Master Drive Choose the MA Jumper b Slave Drive Choose the SL Jumper e Hard Drive a imansoara OOO O i e Primary 1 f Secondly 1 Connect a jumper to the rear side of the COMBO If the jumper is connected to MA Master it will work in the Master mode If the jumper is connected to SL Slave it will work in the Slave mode If the jumper is connected to CS CSEL you can control the device by using the host interface signal CSEL In general connection to MA is recommended f Connecting the audio cable from a sound card Connect the 4 pin audio cable between the sound output terminal on the Optical drive and the audio input terminal on the sound card For clearer sound use a digital output terminal Available only for the CAID that supports digital output This may not be available for general sound cards SAMSUNG DIGITal everyone s invited Setup Installing the CD Record Utility Installing the CD Record Utility To record data on a CD R or CD RW disc in the COMBO drive you must first install the CD record utility For compatibility reasons you are recommended to uninstall any existing software of the same type before installing this utility T Insert the disc supplied with the COMBO drive in the drive 2 Follow the instructions displ
15. rting the disc Open and close the disc compartment and try again Clean the disc and try again The interface mode of the sound card is AT BUS You must therefore connect the COMBO drive to the IDE port on the PC mother board rather than to the sound card or install an E IDE compatible sound card SAMSUNG DIGITal everyone s invited Specifications Specifications jt SAMSUNG continually strives to improve its products Both the design specifications and these user iy instructions are thus subject to change without notice Technical Specifications ITEM CD RW DVD CD Disc types DVD ROM DVD RAM DVD VIDEO DVD R DVD RW CD DA supported Audio CD ROM CD ROM XA CD Plus CD Extra in read mode Photo CD Single Multi session Video CD ready Enhanced CD CD I FMV CD R CD RW CD TEXT Erasing disc types CD RW Disc diameter 120 mm or 80 mm DRIVE Data transfer rate Recording CD R 7800 KB sec 52X PERFORMANCE 7200 KB sec 48X 6000 KB sec 40X 4800 KB sec 32X 3600 KB sec 24X 2400 KB sec 16X 1800 KB sec 12X 1200 KB sec 8X CD RW Ultra Speed Writing DISC 4800 KB sec 32X 3600 KB sec 24X 2400 KB sec 16X High Speed Writing DISC 1500 KB sec 10X Low Speed Writing DISC 600 KB sec 4X Reading CD CD R CD RW DVD PIO mode 4 16 6MB sec Multiword DMA mode 2 16 6MB sec Ultra DMA mode 2 33 3MB sec Semiconductor laser Slide mechanism Stepping
16. tware and DVD Video playback appropriate hardware the Power DVD MPEG software is included in the COMBO drive package DVD Region Protection Coding RPC he RPC feature is supported on DVD players and is used with DVD video discs such as movies Currently he motionpicture industry has divided the worldinto different regions or zones thatcorrespond to the regional markets intowhich the motion picture industry releasesmovies Simply put RPC codes are placedon movies marketed throughout the world based on the region of the world inwhich they are being sold These RPCcodes help control and prevent piratingof new movies into other motion pictureregions prior to their true releasedates within those markets The SM 352N COMBO drive supports RPCphase II In the RPC 2 mode the localcode can be changed by users RPC 2is selected by default for the SM 352N COMBO drive ou can change the region code up tofive times via an MPEG application Please contact your dealer or local SAMSUNG representative if you wish tochange the local code more than fivetimes SAMSUNG DIGITal everyone s invited Troubleshooting Solving Recording Problems Hard Drive Network Drive CD ROM Drive If you have any problems in recording via your COMBO drive follow the appropriate instructions below for the source that you are using Hard Drive Check whether the source file is corrupted _ Optimize the hard disk by using the Windows defragment
Download Pdf Manuals
Related Search