Samsung SC07APGD User Manual
Contents
1. r ero Mode Digital On Off Ti Mode Digital 7 On Off If the atmosphere in your room is very humid or damp you can remove excess humidity without lowering the room temperature too much 1 If necessary press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 Ifthe O is not displayed at the top of the remote control press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in DRY mode Note You can change modes at any time 3 To adjust the temperature press the 3 button one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press the button The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts removing the excess humidity the quantity of air is adjusted automatically To control the direction of the air flow refer to pages 16 and 17 Airing Your Room ENG2. 5 To control the direction of the air flow refer to pages 16 and 17 Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible Example You have just come home and find that the room is very The Turbo function operates for 30 minutes with the maximum settings before hot You wish to cool it down as quickly as possible retuming automatically to the mode and temperature previously selected 1 If necessary press the 5 On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps TURBO 2 Pressthe a button Result The temperature and fan settings are adjusted automatically The air conditioner cools the room as quickly as possible After 30 minutes the air conditioner is reset automatically to the previous mode temperature and fan settings But if you press the amp button in DRY or FAN mode it will change to AUTO mode automatically 3 If you wish to stop the Turbo function before the end of the 30 minute period press the button again Result The air conditioner is reset automatically to the previous mode temperature and fan settings 4 Tocontrol the direction of the air flow refer to pages 16 and 17 r d ero Mode Digital 7 On Off ENGLISH Removing Excess Humidity
3. 23 m Cleaning Your Air Conditioner 24 m Cleaning Deodorizing and Bio Filters Option 25 Correct Disposal of This Product Waste Electrical amp Electronic Equipment a Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal ENGLISH View of the Unit The design and shape are subject to change according to the model Indoor Unit Auto grille Air Inlet Room temperature sensor ESE Air filter under the grille Air flow blades outlet N Operation indicator EN Timer indicator 1 44 sd Set temperature amp Mk Room temperature S
4. USER S MANUAL Indoor unit ASO7P2GED SCO7APGD SC07ZP2D ASO9P2GBD ASO9P2GED SCO9APGD SC09ZP2D AS12P4GBD AS12P4GED SC12APGD SC12ZP4D Outdoor unit USO7P2GED SCO7APGDX SCO7ZP2DX USO9P2GBD USO9P2GED SCOSAPGDX SCO9ZP2DX US12P4GBD US12P4GED SC12APGDX SC12ZP4DX Split type Room Air Conditioner Cooling OOOOPOG DB98 21143A 3 US18PJGB US18PJGE SC18APODX SC18ZPJX US24P6GBD US24P6GED SC24AP6DX SC24ZP6DX ENGLISH ESPANOL PORTUGU S ITALIANO FRAN AIS DEUTSCH EA AAHNIKA Register your product at www samsung com global register Safety Precautions The following safety precautions must be taken when using your air conditioner db WARNING Risk of electric shock e Can cause injury or death e Disconnect all remote electric power supplies before servicing installing or cleaning e This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard DURING OPERATION Users of this product are cautioned not to attempt repair of this product ETE ee we at their own discretion Instead they are requested to directly contact a designated service center or the outlet at which the product was purchased Never spill any kind of liquid into the unit Should this happen unplug or main switch off the unit and contact an authorized service center Do not insert anything between the air outlet blades because the inner fan may be damaged and could caus
5. Mode _ Digital on off prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 1 If necessary press the On Off button 2 Select COOL mode by pressing the button Note You can select the Energy saving mode only in the COOL mode 3 Press the pe button Cc Result The indoor unit beeps The air conditioner runs in the Energy saving mode The outer air flow blade moves up and down To stop the Energy saving mode press the pe button again CD 4 To adjust the temperature press the button one or more times until the required temperature is displayed Possible temperatures are between 26 C and 30 C inclusive Note If you want to adjust temperature under 26 C cancel the Energy saving mode before adjusting the temperature 5 To select the fan speed press the gt button one or more times until the required setting is displayed 6 To control the direction of the air flow refer to pages 16 and 17 Generating Anions ENGLISH The air conditioner can generate anions with an ionizer in the indoor unit Since it is an additional function you can select it any mode even when the air conditioner is tumed off 1 Press the Zs button Cc Result The air conditioner generates anions The indoor unit beeps Note Ifyou press the gt bu
6. instructions Check that there is no obstacle in front of the outdoor unit The fan speed does not change when you press the B button Check that the operating mode is set to COOL or FAN in the AUTO mode the fan speed changes automatically and in the DRY mode it is set to AUTO The air flow direction does not change when you press the button Check that the air conditioner has been switched on if necessary press the On Off button on the remote control The timer is not correctly triggered Check that the timer has been programmed correctly see pages 18 and 19 Odour is permeated in the room during air conditioning Air the room Cleaning Your Air Conditioner For the best use of your air conditioner you must clean it every two weeks regularly to remove the dust that accumulates on the air filter PORTANT Before cleaning your air conditioner ensure that you have switched off the breaker used for the unit 1 Slide the lower front grille down 2 Open the upper front grille by pulling right and left sides of the grille 3 Disassemble the upper front grille by opening the grille completely 4 Lift out the bottom edge of the air filters and pull down to release them 5 Remove all dust on the air filters with a vacuum cleaner or brush 6 When you have finished insert the top part of the filters into their slot and push down on the bottom edge until they
7. you to switch off the air conditioner automatically after a given period of time You can set the period of time from 30 minutes to 24 hours Off 1 To set the operating time press the ES button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hours inclusive maz On Off E Timer Timer DCL Timer 2 Press the SetCanel Set Cancel button to complete the setting es p g 5 2 Result o The remaining time is displayed LE oo 4 Blinking of the timer indicator stops The air conditioner will switch off automatically when the counter displayed on the remote control reaches the set time and disappears the Off timer setting lt lt a js If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours 1 Press the s button until 2 0 Hr is displayed ge pD Tine O Cc 2 Press the 9 Set Cancel button on OM Timer A 3 Press the button until 4 0 Hr is displayed 4 Press the Gs Set Cancel button Note You can see or change the setting mode and or the temperature by pressing the button or the button after setting the Off timer To Cancel the Off Timer Press the sene Set Cancel button C J sn a Note Ifyou press the CC button when the On Timer is set the On Timer is also cancelled a of CI Off Setting the Sleep T
8. LISH If the atmosphere in your room is stale you can air the room using the Fan feature 1 If necessary press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps r ero Mode Digital On Off 2 Ifthe SH is not displayed at the top of the remote control press the button on the remote control one or more times until it m appears f 8 TEE Result The indoor unit beeps each time you press the button oe The air conditioner runs in FAN mode The temperature is set automatically Note You can change modes at any time 3 Select the fan speed by pressing the button one or more times No ue until the required setting is displayed Mode ital 7 On Off lt Medium Ge High Result Each time you press the amp button the indoor unit beeps A gt Ne i 4 To control the direction of the air flow refer to pages 16 and 17 ane st Selecting Energy Saving Mode If you wish to save energy when using your air conditioner select the Energy saving mode with the Energy saving button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used 4 The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to
9. click into place 7 Clean the front grille with a damp cloth and mild detergent do NOT use benzene solvents or other chemicals Body groove 8 Fixthe left side of grille support then insert the right side of grille support If you have not used the air conditioner for a long period of time set the fan going for three to four hours to dry the inside of the air conditioner thoroughly 4 To close the upper front grille completely after cleaning filters tum on and tum off the air conditioner Cleaning Deodorizing and Bio Filters Option ENGLISH To remove minute dust particles and odors deodorizing and Bio filters are installed in the air conditioner You should clean the filters every 3 months 07 09 1234 1 Open the upper front grille by pulling right and left sides of the grille 2 Pull out the deodorizing and Bio filters Bio Filter Deodorizing Filter 3 Wash the filters with clean water then dry them in the shade 9K 18 24 4 Insert the filters into the original position Deodorizing Filter Note You can change the position of filters with each other 5 Close the front grille Bio Filter ELECTRONICS Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding Samsung products contact the SAMSUNG customer care center Country Customer Care Center WebSite
10. control as usual Solving Common Problems ENGLISH Before contacting the after sales service perform the following simple checks They may save you the time and expense of an unnecessary call Problem Explanation Solution The air conditioner does not operate at all Check that the breaker used for the air conditioner is switched on Check that the operation indicator on the indoor unit is on if necessary press the On Off button on the remote control Check whether the Timer indicator on the indoor unit is switched on If so Wait until the switch on time is reached and the air conditioner starts up automatically Cancel the timer see pages 18 and 19 for further details The air conditioner does not operate with the remote control o Check that there are no obstacles between you and the indoor unit Check the remote control batteries Check that you are close enough to the indoor unit seven meters yards or less No beep is heard when you press the On Off on the remote control Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit Replace the remote control batteries if necessary The air conditioner does not cool Check that the correct operating mode has been selected AUTO COOL The room temperature may be too low Dust may be blocking the air filter guard refer to page 24 for cleaning
11. e injury Keep children away from the unit Do not place any obstacles in front of the unit Do not spray liquid of any kind into the indoor unit Should this happen switch off the breaker used for your air conditioner and contact your installation specialist Make sure that the unit is correctly ventilated at all times Do not place clothing or other materials over it 4 Ifthe wireless remote control will not be used for a long time remove the batteries If applicable When using a wireless remote control the distance should not be more than 7 meters from the air conditioner If applicable DISPOSING OF THE UNIT Before throwing out the device it is necessary to pull back the battery cells and get rid of them safely for recycling reasons When you need to dispose of the unit consult your dealer If pipes are removed incorrectly refrigerant may blow out and come into contact with your skin causing injury Releasing refrigerant into the atmosphere also damages the environments Please recycle or dispose of the packaging material for this product in an environmentally responsible manner OTHERS Never store or ship the air conditioner upside down or sideways to a na avoid damage to the compressor The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Max current is measur
12. ed according to IEC standard for safety and current is measured according to ISO standard for energy efficiency Contents PREPARING YOUR AIR CONDITIONER m Safety Precautions 2 m View of the Unit ee 4 m Remote Control Buttons and Display esaeen 6 m Getting Started 7 m Inserting the Remote Control Batteries 8 OPERATING YOUR AIR CONDITIONER m Selecting the Automatic Operating Mode 9 m Cooling Your ROOM 10 m Changing the Room Temperature Quickly 11 m Removing Excess Humidity 12 mAiring Your Room 13 m Selecting Energy Saving Mode 14 mGeneratingAnions 15 m Adjusting the Air Flow Direction Verticaly 16 m Adjusting the Air Flow Direction Horizontally 17 PROGRAMMING YOUR AIR CONDITIONER mSetingiheOnlimer 18 m Setting the Off Timer 19 mSetingiheSleeplimer 20 RECOMMENDATIONS FOR USE m Operating Recommendations 21 m Temperature and Humidity Ranges a assau seeaaaa reaa 22 m Operating Your Air Conditioner Without the Remote Control 22 mSolvingCommonProblems
13. er Set Cancel button Cc C 5 Sleep button N Anionss button Getting Started You have just purchased a split type air conditioner and it has been installed by your installation specialist Your Owner s Instructions contains valuable information on using your air conditioner Please take the time to read it as it will help you take full advantage of the unit s features The booklet is organized as follows The following figures are shown on pages from 4 to 6 Indoor and outdoor units Remote control buttons and display They will help you find the buttons and understand the symbols displayed In the manual you will find a series of step by step procedures for each function available The illustrations in the step by step procedures use three different symbols HOLD DOWN ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when You purchase the air conditioner The remote control does not work correctly Note Use two AAA LRO3 1 5V batteries Do not use old batteries or different kinds of batteries together Batteries may be completely discharged after 12 months even if they have not actually been used 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it 2 Insert the two batteries taking care to respect the polarities on the battery with on the re
14. imer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of 6 hours Nota If you wish to switch the unit off at a specific time refer to page 19 1 Make sure that you have selected the COOL mode 2 Press the button Result The indoor unit beeps The air conditioner will be controlled as indicated in the illustrations below Cooling The desired temperature is increased by 1 C every hour When it has been increased amp by 2 C after 2 hours the INC temperature is maintained for E four hours Start Stop time time To Cancel the Sleep Timer If you no longer wish to use the Sleep Timer that you have set you can cancel it at any time Press the PN button lt lt a 7 p gt Result The indoor unit beeps The Dis no longer displayed The air conditioner operates normally On On Timer Timer Setta D O O ED a Operating Recommendation ENGLISH Here is a recommendation that you should follow when using your air conditioner Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating the unit is switched off When the power returns the air conditioner starts up again automatically Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the ai
15. ir flow blade can be adjusted vertically the inner blades can be adjusted horizontally 1 Adjust each set of inner blades to the required position by pushing or pulling them sideways Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time You can set the period of time from 30 minutes to 24 hours On 1 To set the operating time press the ES button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hours inclusive aT 2 Press the Ey Set Cancel button to complete the setting Result o The remaining time is displayed Blinking of the timer indicator stops The selected mode and the temperature on the display disappear after 10 seconds The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On timer setting On Mode Timer 65 zi 3 To select an operating mode in advance press the button until the desired mode is displayed at the top of the remote control Result The air conditioner will run in the selected mode when it is turned on To Cancel the On Timer Timer Press the setCanel Set Cancel button CO Timer Note If you press the ym button when the Off Timer is set the Off Timer is also cancelled Setting the Off Timer ENGLISH The Off Timer enables
16. lected when the unit was last used The indoor unit beeps foro PORTANT The air conditioner is fitted with a protection mechanism to Mode O Digital On Off prevent the unit from being damaged when it is started immediately after being Plugged in i j Stopped It will start up normally after three minutes 2 Ifthe e is not displayed at the top of the remote control press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in COOL mode Note You can change modes at any time 3 To adjust the temperature press the button one or more times until the required temperature is displayed Possible temperatures are between 18 C and 30 C inclusive Result Each time you press the button The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts cooling provided that the room temperature is higher than the selected temperature rature the air If the room temperature reaches the set temperature the ai conditioner stops cooling but the fan is still operating Mode Digital On Off 4 Select the fan speed by pressing the button one or more times until the required setting is displayed Gaa Automatic rotated SG gt Ka Low lt Medium amp High Result Each time you press the button the indoor unit beeps
17. leep Timer indicator Anions indicator Fan speed setting Note 4 If you want to turn on off the display during operation press the button on the remote control The room temperature sensor senses air temperature around the sensor and shows the temperature on the display Le ENGLISH USO7P2GED SC07ZP2DX USO9P2GBD USO9P2GED SC09ZP2DX US12P4GBD US12P4GED SC12ZP4DX Air Inlet Rear Air Outlet Connection Valve SCO7APGDX SCO9APGDX SC12APGDX Air Inlet Rear Air Outlet Connection Valve inside US18PJGB US18PJGE SC18ZPJX Air Inlet Rear Air Outlet Connection Valve inside SC18APODX US24P6GBD US24P6GED SC24AP6DX SC24ZPE6DX Air Inlet Rear Air Outlet Connection Valve Remote Control Buttons and Display Remote control transmission indicator Battery discharge indicator Fan speed Anions indicator Sleep mode On Off button Mode selection button AUTO COOL DRY FAN Fan speed adjustment button Turbo button On Timer button Off Timer button Di Cut NA L gt Mode Digital 7 On Off C 2 Operating mode 4 AUTO 28 COOL DRY e FAN Turbo mode Temperature setting Air flow direction Off Timer setting Energy saving Temperature adjustment buttons Digital 7 On Off button HB WT gt gt On Off Timer Timer Timer Set Cancel Energy saving button Swing button Tim
18. mote control on the battery with on the remote control 3 Close the cover by sliding it back until it clicks into place Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control In the Automatic mode the optimum temperature and the fan speed is selected automatically 1 If necessary press the On Off button Result o The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 Ifthe Law is not displayed at the top of the remote control Mode press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the O button 4 The air conditioner runs in AUTO mode Note You can change modes at any time ENGLISH 4 Eero Mode Digital 2 On Off O a IL Cooling Your Room You must select the Cool mode if you wish to adjust the Cooling temperature Fan speed when cooling 1 If necessary press the On Off button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode se
19. r conditioner can be used If the air conditioner is used at Then High temperatures The automatic protection feature may be triggered and the air conditioner stopped Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for long periods Mode Outdoor Temperature Indoor Temperature Indoor Humidity Cooling 21 to 43 C approx 18 C to 32 C approx 80 or less Drying 18 C to 43 C approx 18 C to 32 C approx x If the cooling operation is used at over 33 C indoor temperature it does not cool at its full capacity Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken 1 Slide the lower front grille down 2 To switch the air conditioner on press the On Off switch on the right side of the indoor unit Result The Operation indicator on the indoor unit comes on The indoor unit beeps The air conditioner starts up in the most suitable mode for the room temperature Room Temperature Operating Mode 21 C or above Cool 3 To switch the air conditioner off press the On Off switch again Note Even if the air conditioner has been switched on via the On Off switch operations can still be controlled using the remote
20. tton during off the air conditioner will turn on automatically and generate anions in the Fan mode with Low fan speed 2 If you wish to stop the Anions function press the button again Result The air conditioner is reset automatically to the previous mode 0a Os Cc pe am temperature and fan settings Er TE Timer Timer Set Cancel QOQ OQO Cc e 5 EA 3 To control the direction of the air flow refer to pages 16 and 17 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room you can adjust the position of the outer air flow blade on the bottom of the unit thus increasing the efficiency of the air conditioner 1 Press the E button one or more times as required i w Result The outer blade is adjusted vertically lt U RECOMMENDATION When Adjust the blade to face G Cooling Upwards 2 If you want the blade to move up and down automatically when the air conditioner is operating press the 5 button Result The blade move up and down around the base position set 3 To stop the blade moving up and down press the 5 button again Nowe If you switch the air conditioner Then the blade is Off Closed completely On again Set to the initial position powered Adjusting the Air Flow Direction Horizontally ENGLISH There are two sets of inner air flow blades J ust as the outer a
Download Pdf Manuals
Related Search