Samsung MR-EH00 User Manual
Contents
1. MR EH00_IB_04667A 01_EN indd 22 Classification Big Duct Inverter C RAC Inverter Duct Inverter JSF2 Inverter Up and down swing Not supported Supported ot supported Supported Left and right swing Not supported Not supported ot supported Supported Quiet Not supported Not supported ot supported Supported good sleep Not supported Supported ot supported Supported Turbo Not supported Not supported ot supported Supported Purity Not supported Not supported ot supported Supported Individual blade control Not supported Not supported ot supported Not supported in Supported Supported Supported Supported Beep Not supported Not supported ot supported Not supported Forced trial operation Not supported Not supported ot supported Not supported Not supported Not supported ot supported Not supported Global_4way Cooling Slim_1way Cooling Classification Ceiling BLDC Inverter only constant velocity only constant velocity 2way type type Up and down swing Supported Supported Supported Supported Left and right swing Not supported Not supported ot supported Not supported Quiet Not supported Not supported ot supported Not supported good sleep Not supported Not supported Supported Not supported Turbo Not supported Not supported ot supported Not supported Purity Not supported Supported Supported Supported Individual blade control Not supported Sup2. 10 seconds after setting the time Therefore check for the On indicator on the remote controller display On gt Press the Timer button gt select On press the lt or gt button gt Cancel set the timer to gt press the SET button Zone 1 rE Additional options available in On timer Select the mode from Auto gt Cool gt Dry gt Fan and gt Heat 3 Heat mode operates with MR EHOO MR EHOOU model only You can adjust the temperature after timer setting is completed Temperature adjustment is only available in Auto Cool Dry Heat mode In Fan mode temperature cannot be adjusted Heat mode operates with MR EHOO MR EHOOU model only When On timer setting is completed the set status will be displayed for 3 seconds and then only On indicator NOTE will remain on the remote controller display thereafter You cannot set the Fan speed when setting the On timer ENGLISH 13 04667 01 13 2014 12 04 10 29 06 Setting the On Off timer l Setting the Off timer When the air conditioner is turned on 1 Press the Timer button to select Off Off indicator will keep blinking and you can set the time 2 Press the lt or gt button to set the time You can set the time in half hour unit from 30 minutes 0 5 on the display 3 hours and hour unit from 3 24 hours Time can be set from minim
3. Aw ARNING Hazards or unsafe practices that may result in severe personal injury or death 3 ere gt A CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage 2 0 Follow directions Do NOT attempt ab Make sure the machine is grounded to prevent electric shock Unplug the appliance Do NOT disassemble FOR INSTALLATION A WARNING The installation of this product must be performed by a qualified technician Failure to do so may result in electric shock fire product malfuction explosion or injury Do not install this product near a heater or inflammable material Do not install this product in a humid oily or dusty location in a location exposed to direct sunlight and water rain drops Do not install this product in a location where gas may leak Otherwise electric shock or fire may occur ENGLISH 3 04667 01 44 3 2014 12 04 10 29 03 Safety precautions FOR INSTALLATION A CAUTION Q Install the product on a hard and level place that can support its weight the place cannot support its weight the product may fall down and it may cause product damage FOROPERATION 4 WARNING If the product generates a strange noise a burning smell or smoke unplug the product immediately and contact your nearest service center Otherwise electric shock or fire may occur Q Do
4. a Jr Remote controller display Selecting a blade You can select individual units in order 1 4 or select all indoor units at one time You can select and operate individual blades out of 4 blades When the air conditioner is turned on ON ATN Timer Options Genine Auto 56 I Remote controller display MR EH00_IB_04667A 01_EN indd 20 1 5 Temp 2 1 ory 3 4 Press the button Blade 1234 will be displayed Press the Settings button Press the lt gt or Settings button until Blade indicator starts to blink Press the SET button to select the blade you want to operate You can select the individual blades in order 1 4 or select all blades at one time To cancel the selected blade press the button note When selecting the blade individually button will not work ENGLISH 20 2014 12 04 2a 1 0 29 09 Appendix l Detailed control specification of a remote controller by each indoor unit frame Classification Console2 SOC EEV RAC DVM Master N JSF2 Up and down swing Supported Supported Supported Supported 5 Left and right swing Not supported Not supported Not supported Supported 9 Quiet Not supported Not supported Not supported Not supporte
5. good sleep Not supported Supported Not supported Not supported Turbo Not supported Supported Not supported Supported Purity Supported Not supported Not supported Not supported Individual blade control Not supported Not supported Not supported Not supported in Supported Supported Supported Supported Beep Not supported Supported Supported Supported Forced trial operation Not supported Not supported Not supported Not supported o Not supported Not supported Not supported Not supported ENGLISH 23 MR EHOO_IB_04667A 01_EN indd 23 2014 12 04 10 29110
6. not attempt to repair disassemble or modify the product yourself Otherwise electric shock fire product malfuction or injury may occur ENGLISH 4 MR EH00_IB_04667A 01_EN indd 4 2014 12 04 10 29 03 FOROPERATION CAUTION Do not allow water to enter the product Otherwise a fire or explosion may occur LO Do not operate the product with wet hands Otherwise electric shock may occur Do not spray volatile material such as insecticide onto the surface of the product As well as being harmful to humans it may also result in electric shock fire or product malfunction Do not give a strong impact to the product and do not disassemble the product Do not use this product for other purposes This product is designed to be used only for a system air conditioner Do not press the buttons with any sharp objects Otherwise electric shock or part damage may occur Do not clean the product by spraying water directly onto it Do not use benzene thinner alcohol or acetone to clean the product Otherwise discoloration deformation damage electric shock or fire may occur ENGLISH 5 04667 01 44 5 2014 12 04 2a 10 29 08 Checking before using the product Accessories Item Wireless remote controller Remote controller batteries 16 screws Remote controller holder User manua
7. LISH 10 MR EHOO_IB_04667A 01_EN indd 10 2014 12 04 10 29104 l Turning the air conditioner on Press the button to operate the air conditioner l Selecting the operation mode Press the button to select an operation mode Auto Cool Dry Fan Set r Set Set I I 5 p gt Heat mode operates with MR EH00 MR EH00U model only l Adjusting the temperature Press the button to adjust the temperature 3 3 15 8 ZO Auto Temperature can be adjusted by 1 C 1 F within the range of 18 C 65 F 30 C 86 F Cool Temperature can be adjusted by 1 C 1 F within the range of 18 C 65 F 30 C 86 F Dry Temperature can be adjusted by 1 C 1 F within the range of 18 C 65 F 30 C 86 F Fan Temperature cannot be adjusted Heat Temperature can be adjusted by 1 C 1 F within the range of 16 C 61 F 30 C 86 F Selecting the fan speed Press the button to adjust the fan speed Auto 5 Auto Cool Auto Low 2 Med Pi High Dry 5 Auto Fan Low Med 8 High Heat Auto low Med High ENGLISH 11 MR EHO00_IB_04667A 01_EN indd 11 2014 12 04 2a 10 29105 Basic operation Selecting air flow direction This function allows you to shift the air flow di
8. MR EHOO_IB_04667A 01_Cover_EN indd 2 2014 10 22 1 31111 Wireless remote controller MR EHOO MR ECOO 100 Recycled Paper imagine the possibilities Thank you for purchasing this Samsung product DAADAA A vwes 04667A 01 en MR EHO0_IB_04667A 01_Cover_EN indd 3 2014 10 22 naifi Contents PREPARATION 3 Checking before using the product 6 BASIC OPERATION sing the remote Controle asane 7 10 TIMER Setting the On OmtimMen cc icarecdadedtavanscckernsadecmedintdaascessidadassanaesepmaisneaaiboogeenaselsomenaaenandaaaahete Setting the good sleep mode OPTIONS U ingithe TUBO TUNGUM saii 17 Usingthe Purity UNGON 18 Wsing the Quiet function 19 SETTINGS SelectingamiNdooruUNit EA T EA 20 Selecting diblade 20 OTHERS ceed 21 ENGLISH 2 4667 01 44 2 2014 12 04 2a 10 29102 Safety precautions This content is intended to protect the user s safety and prevent property damage Please read it carefully for correct use of the product
9. O MR EHOOU model only Ifthe Turbo function is selected while Quiet function is on the Quiet function will be cancelled Air flow direction can be adjusted with every direction Duct type model cannot adjust air flow direction up and down Temperature and fan speed cannot be adjusted ENGLISH 17 2014 12 04 SNOIldO 0 QA 10 29108 Using the Purity function Purity function will remove harmful materials in the air to provide you clean and healthy environment You can select this function additionally while the air conditioner is in operation When the air conditioner is turned on 1 Press the Options button 2 Press the lt gt or Options button until 453 indicator starts to blink 3 Press the SET button to set the Purity function 55 455 indicator will be displayed on the remote controller display and Virus Doctor function will begin gt Press the Options button gt press the lt gt or Options button to make the 5 5 indicator blink and press the SET button Cancel Cr Gos You may select the purity function additionally during Auto Cool Dry NOTE Heat mode and you can adjust the temperature Auto Heat mode operates with MR EHOO MR EHOOU model only 35 ain Ifthe purity function is selected additionally in fan mode the temperature cannot be adjusted When the air conditioner and the purity function
10. are turned on simultaneously and you press the Power button both air conditioner and purity function will stop operation You can still use the purity function when the On timer is set with the air conditioner is turned off Remote controller display There will not be much difference on energy consumption and operating noise when the purity function is selected additionally while the air conditioner is turned on When the air conditioner is turned off 1 Press the Options button A i 9 2 Press the SET button when 3 indicator blinks to begin purity function Tem an e i e 6 Gr 28 gt 05 indicator will be displayed on the remote controller display and YH Virus doctor function will begin eae imer ron Cancel Press the Options button to make the 455 indicator blink and press S the SET button Zone 1 Remote controller display ENGLISH 18 04667 01 18 2014 12 04 ea 10 29 08 Using the Quiet function You can reduce the noise generated from the indoor unit during Cool Heat mode When the air conditioner is operating in Cool or Heat mode 856 1 Press the Options button 2 Press the lt gt or Options button until Quiet indicator starts to blink 3 Press the SET button to set the Quiet function Quiet Quiet indicator will be displayed o
11. batteries in this product Applicable in countries with separate collection systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system ENGLISH 9 MR EH00_IB_04667A 01_EN indd 9 2014 12 04 10 29 04 Basic operation Basic operation is an operation mode that can be selected by pressing the Mode button l Auto In Auto mode the air conditioner will automatically adjust the temperature and fan speed to maintain your fresh environment gt When the indoor temperature is too high the powerful cool breeze is generated and when the indoor room becomes cool enough the soft breeze is generated l Cool Cool mode is frequently used and you can freely control the temperature fan speed and air flow direction in Cool mode gt When you select the Heat mode while the Cool mode is on the Cool mode is cancelled l Dry The air conditioner in Dry mode acts like a deh
12. d m good sleep Not supported Supported Supported Supported Turbo Not supported Supported Supported Supported Purity Supported Not supported Not supported Supported Individual blade control Not supported Not supported Not supported Not supported Murti channel s Supported Supported Supported Supported Indoor unit selection Beep Supported Not supported Not supported Not supported Forced trial operation Not supported Not supported Not supported Not supported Not supported Not supported Not supported Not supported Classification Console Inverter G_Mini4way Inverter Up and down swing Supported Supported Supported Supported Left and right swing Not supported Not supported Not supported Not supported Quiet Not supported Not supported Not supported Not supported good sleep Not supported Not supported Supported Not supported Turbo Not supported Not supported Not supported Not supported Purity Supported Supported Supported Supported Individual blade control Not supported Supported Not supported Supported in Denia Supported Supported Supported Supported Beep Supported Supported Not supported Supported Forced trial operation Not supported Not supported Not supported Not supported Not supported Not supported Not supported Not supported ENGLISH 21 4667 01 44 21 2014 12 04 10 29110 Appendix l Detailed control specification of a remote controller by each indoor unit frame
13. dditional options available in good sleep mode Temperature can be adjusted by 1 C 1 F within the range of 18 C 65 F 30 C 86 F ENGLISH 15 MR EHOO_IB_04667A 01_EN indd 15 2014 12 04 10 29 07 Setting the good sleep mode Temperature and Fan speed change in good sleep mode 1 Fall asleep mode Provides you with comfortable environment for a good sleep by rapid cooling and hypnagogue expedition breeze 2 Sound sleep mode The sound sleep mode adjusts temperature and air flow in waves to maintain healthy skin temperature while it aids deep sleep According to the change of good sleep operation hours the sound sleep hour can be longer or shorter 3 Wake up from good sleep mode Provides you with the air flow that adjusts your body temperature to wake you up ina fresh status of In good sleep mode the air conditioner will operate in Cool 6 5 mode for first 30 minutes Fan speed and the NOTE air flow direction will be adjusted automatically in good sleep mode Recommended set temperature is between 25 C 77 F 27 C 81 F and 26 C 79 F is the most ideal temperature Ifthe set temperature is too low you may feel cold during sleep or catch a cold Optimal operation hour of good sleep mode is 8 hours Therefore if the time is set too short or long you may not feel as comfortable as you would expect Ifthe good sleep mode is set over 5 hours Wake up stage will begin whe
14. er Selects or cancels an option Direction P Moves to select and set an option In case you wish to cancel the options or settings that you have just set press the Options or Settings button NOTE again then the most recently selected item will blink and you may simply cancel it by pressing the SET button while selected item is blinking ENGLISH 7 4667 01 44 7 2014 12 04 10 29104 Using the remote controller Remote controller display Operation mode Remote controller Heat mode is applicable to Auto Cool D ry transmission MR EHOO MR EHOOU m Fan IZ Low battery Set temperature or on off set time with the timer function Fan speed On Off time ee Air flow direction Options Filter Reset Zone 1 2 3 4 Beep Settings For MR EHOOU MR ECOOU model the temperature unit will be indicated by F on the display note When turning off and turning on the remote controller the Timer Options and Settings set before turning off the remote controller are cancelled However the fan direction does not change Battery changing time When the battery is exhausted will be displayed on the remote controller display When the icon appears change the batteries The remote controller requires two 1 5V AAA type batteries Storing the remote controller When you do not use the remote controller for a long time remove the batteri
15. es from the remote controller and store it in the remote controller holder ENGLISH 8 04667 01 44 8 2014 12 04 10 29104 Inserting the batteries 1 Open the battery cover of the remote controller Press the part gently and lift it up in the arrow direction 2 Insert the batteries Check and match the and signs accordingly 3 Close the battery cover Match the cover and bottom part of the remote controller and press it until you hear click sound Make sure that water is not allowed to enter the remote controller CAUTION 3 DISVE ZO There is a possibility that the air conditioner will not operate by remote controller near strong light such as a NOTE fluorescent lamp or neon sign In this case use the remote controller in front of the remote controller receiver of the indoor unit If other electrical products are operated by the remote controller call your nearest service center Filter reset When the filter reset indicator is turned on the indoor unit display clean the filter and press the Settings gt lt gt or Settings gt Filter Reset blinking SET button Beep off silence the beep sound press the Settings gt lt gt or Settings gt Beep blinking gt SET button If you press the Settings gt lt gt or Settings Beep blinking gt SET button again the beep sound will ring again Correct disposal of
16. l Quantity 1 eS Select the following places to install the remote controller holder note Where there is no interference to the remote controller signal Not exposed to direct sunlight or heat source More than 1 m away from a television or stereo system 1 Mark the spots with a pencil where you will install the remote controller holder 2 Drill the marked holes 2EA for screws on the wall 3 Install the remote controller holder on the wall by using the screws MR EH00_IB_04667A 01_EN indd 6 ENGLISH 6 W 2014 12 04 1 0 29103 Using the remote controller Point the remote controller towards the remote controller receiver of the indoor unit gt When you press the button on the remote controller correctly you will hear beep sound from the indoor unit and a transmit indicator appears on the remote controller display l Remote controller buttons 3 3 15 8 ZO Air flow direction Up and down Adusts the air flow direction up and down Not applicable to Duct type models Power Turns the air conditioner on or off Mode Selects operation mode Temperature Adjusts the temperature Fan speed Adjusts the fan speed Options Selects options during operation Air flow direction Left and right Adjusts the air flow direction left and right Timer Settings Sets timer option Selects settings SET e
17. n 1 hour is remaining in the operation time and the air conditioner will stop automatically When the On timer and the good sleep mode are set simultaneously the air conditioner will only apply the function that was set later While good sleep mode is operating mode can be set additionally by pressing the Options button Ifyou press the Options button and select the Turbo Quiet function the good sleep mode will be cancelled and the selected mode will begin operation Ifyou press the Mode button the good sleep mode will be cancelled and the selected mode will begin operation ENGLISH 16 MR EHOO_IB_04667A 01_EN indd 16 2014 12 04 10129107 Using the Turbo function You can set the Turbo function to provide fast and powerful cooling heating When the air conditioner is operating in Cool or Heat mode Remote controller display MR EHOO_IB_04667A 01_EN indd 17 1 Press the Options button 2 Press the lt gt or Options button until Turbo indicator starts to blink 3 Press the SET button to set the Turbo function Turbo gt Turbo indicator will be displayed on the remote controller display and Turbo function will operate for 30 minutes gt Press the Options button gt press the lt gt or Options button to cancel make the Turbo indicator blink and press the SET button Turbo function is only available in Cool Heat mode nore Heat mode operates with MR EHO
18. n the remote controller display and Quiet function will begin vI Additional options available in Quiet function Cool SNOIldO YO gt Press the Options button gt press the lt gt or Options button to make the Quiet indicator blink and press the SET button Cancel In Cool mode Set prez r Temperature can be adjusted by 1 C 1 F within the range of m 18 C 65 F 30 C 86 F m In Heat mode Quiet Temperature can be adjusted by 1 C 1 F within the range of 16 C 61 F 30 C 86 F Zone 1 lt Heat mode operates with MR EHOO MR EHOOU model only Eee Fan speed is set to Auto Remote controller display Air flow direction can be adjusted Quiet function can be set only in Cool Heat mode and if the Quiet NOTE function is selected while Turbo function is on the Turbo function will be cancelled Heat mode operates with MR EHOO MR EHOOU model only ENGLISH 19 MR EHO00_IB_04667A 01_EN indd 19 2014 12 04 2H 10 29 09 Selecting an indoor unit You can select and operate individual indoor units out of 4 indoor units When the air conditioner is turned on 1 Press the Settings button 2 Press the lt gt or Settings button until Zone indicator starts to blink 3 Press the SET button to select the indoor unit you want to operate Gimer lt Auto Set
19. n timer or the Off timer is set setting can be cancelled by pressing the Power button ENGLISH 14 MR EHOO_IB_04667A 01_EN indd 14 2014 12 04 55 102907 Setting the good sleep mode For a comfortable sleep the air conditioner will operate in 3 stages in order of Fall asleep gt Sound sleep gt Wake up stages When the air conditioner is operating in Cool mode 1 Press the Timer button to select 53 OA 5 oS 5 49 indicator will keep blinking and you can set the time 5 U ly 2 Press the lt or gt button to set the time You can set the time in half hour unit from 30 minutes 0 5 on the display 3 hours and hour unit from 3 12 hours Time can be set from minimum 30 minutes to maximum 12 hours Default time setting for the good sleep mode is 8 hours 3 Press the SET button to complete the good sleep mode setting 9 indicator and the set time of the good sleep mode will be displayed on the remote controller display Cool good sleep mode will be cancelled if you don t press the SET button within Set 10 seconds after setting the time Therefore check for the indicator on the offa remote controller display ol P gt Press the Timer button select 5 gt press the lt or gt button gt Cancel set the timer to press the SET button Remote controller display A
20. ported ot supported Not supported muti channel Supported Supported Supported Supported Indoor unit selection Beep Supported Supported ot supported Supported Forced trial operation Not supported Not supported ot supported Not supported Not supported Not supported ot supported Not supported ENGLISH 22 2014 12 04 10 29 10 Classification Ceiling Mini4way Slim1way Big Slim1way Up and down swing Supported Supported Supported Supported Left and right swing Not supported Not supported Not supported Supported Quiet Not supported Not supported Not supported Not supported good sleep Not supported Not supported Supported Supported Turbo Not supported Not supported Not supported Supported Purity Not supported Not supported Supported Supported z Individual blade control Not supported Not supported Not supported Not supported mutti channel i Supported Supported Supported Supported Indoor unit selection Beep Supported Not supported Supported Supported Forced trial operation Not supported Not supported Not supported Not supported Not supported Not supported Not supported Not supported Classification Console NeoForte DVMQ Super Up and down swing Supported Supported Supported Not supported Left and right swing Not supported Not supported Supported Not supported Quiet Not supported Not supported Not supported Not supported
21. rection up and down or left and right Press the or button to move the air flow direction up and down or left and right while the air conditioner is turned on gt When the blade reaches the desired position press the or KY button one more time to set the air flow direction The up down and left right tilting of the blade will stop Duct type model cannot adjust air flow direction up and down Auto Set Zone 1 Blade 1234 Remote controller display ENGLISH 12 MR EHO00_IB_04667A 01_EN indd 12 2014 12 04 ea 10 29 06 Setting the On Off timer You can set the air conditioner to be turned on or off automatically at desired time l Setting the On timer When the air conditioner is turned off 1 Press the Timer button to select On YAWIL 0 amp N On indicator will keep blinking and you can set the time an D 2 Press the lt or gt button to set the time lt gt 4 You can set the time in half hour unit from 30 minutes 0 5 on the display 3 hours and hour unit from 3 24 hours Time can be set from minimum 30 minutes to maximum 24 hours 3 Press the SET button to complete the On timer setting On indicator and the set time of the timer will be displayed on the remote controller display On timer setting will be cancelled if you don t press the SET button within 0 9 6 83 J
22. um 30 minutes to maximum 24 hours 3 Press the SET button to complete the Off timer setting Off indicator and the set time of the timer will be displayed on the remote controller display Off timer setting will be cancelled if you don t press the SET button within Auto 10 seconds after setting the time Therefore check for the Off indicator on the Set r remote controller display gt Press the Timer button gt select Off gt press the lt or gt button gt Cancel set the timer to gt press the SET button Zone 1 Only the latest setting timer will be applied between the Off Timer and NOTE good sleep off timer functions Remote controller display Combining On timer and Off timer When the air conditioner is turned off When the air conditioner is turned on When set time on On timer is shorter than Off timer When set time on On timer is longer than Off timer e g On timer 3 hours Off timer 5 hours e g On timer 3 hours Off timer 1 hour The air conditioner will be turned on after 3 hours from the The air conditioner will be turned off after 1 hour from the moment you have set the timer and the air conditioner will moment you have set the timer and will be turned on after remain on for 2 hours and then be turned off automatically 2 hours from the moment it was turned off Set time for the On timer and the Off timer should be different from each other nore When the O
23. umidifier by removing moisture from the indoor air The Dry mode will provide you with fresh air even on a rainy day l Fan Fan mode provides you with a breeze just like a fan to make fresh environment for you Heat MR EHOO MR EHOOU In Heat mode you can warm your room even in the fall and winter gt The fan may not commence immediately to avoid generating a cold breeze gt During the Heat mode defrost operation may be performed to remove the frost formed on the outdoor unit When the frost is removed by the defrost operation in Heat mode steam is generated from the outdoor unit gt Ifyou stop operating the air conditioner after heating operation the fan will operate for some time to cool the indoor unit When you select the Cool mode while the Heat mode is on the Heat mode is cancelled v When the outdoor temperature is low and humidity is high during the heat mode the outdoor unit s heating capacity may decrease due to the frost formed on the outdoor heat exchanger The defrost operation removes the frost formed on the heat exchanger of the outdoor unit for 5 12 minutes During the defrost operation the indoor unit does not generate breeze in order to prevent cold breeze blowing out The interval between the defrost operation can decrease depending on the amount of the frost formed on the outdoor unit The interval between defrost operation can also decrease by humidity level with rain or snow ENG
Download Pdf Manuals
Related Search