Samsung CB-14Y4T User Manual
Contents
1. When both the front and rear connectors are connected to external equipment the front AV has the priority QB Decoder Video game Video disc 17 Problems and Solutions Before contacting the after sales service perform the following simple checks If you cannot solve the problem using the instructions below note the model and serial number of the television and contact your local dealer Problem Checks Explanation Solution No sound or picture Check that the mains lead has been connected to a wall socket and the wall socket is switched on Check that you have pressed the On Off button POWER on the front panel Check the picture contrast and brightness settings Check the volume Normal picture but no sound Check the volume Check that the MUTE RK has not been pressed on the remote control if it has the 4X symbol is displayed on the screen No picture or black and white picture Adjust the colour settings Press the P STD Sound and picture interference Try to identify the electrical appliance that is affecting the television and move it further away Plug your television into a different mains socket Blurred or snowy picture distorted sound Check the direction location and connections of your aerial This interference is often due to the use of an indoor aerial Remote control malfunctions Replace the remote cont2. SETTING THE CHANNELS Storing the Channels Manually seen Storing the Channels Automatically seen Skipping Unwanted Channels sse Fine tuning Channel Reception sssseeeeneennnn USING YOUR TELEVISION Adjusting the PICture Choosing the Picture Standard sese Changing the Picture Size sssseeeeeneneeneneenn Selecting the Sound System Option Adjusting the Volume rrr aeta enitn Switching the Sound Off Temporarily sse Setting the Sleep Viewing Pictures from External Sources sse USING THE TELETEXT FUNCTION t Displaying the Teletext Selecting a Page by Number sse Using FLOF to Select a Storing Teletext 8 USEFUL TIPS AND RECOMMENDATIONS Symbols Connections to the AV Inputs Problems and Solutions cccccccesssssssseceeeeeeeeeceeeeeeeececececseseeeeersrsssnteeee
3. Cable Television Network Rear of the TV depending on the model Plug the aerial or cable network input cable into the socket marked 75 Q at the bottom of the television s rear panel Aerial Cita Cable Television Network Rear of the TV depending on the model Plug the aerial input cable into the appro priate socket on the VCR Connect a coaxial cable to the VCR aerial output socket Television aerial input socket marked 75 Q Rear of the TV depending on the model To obtain better picture quality and simplify the setting up of the VCR you can connect an audio video cable between The AV SCART or RCA output socket on the VCR and The AV SCART or RCA input socket on the rear of the television Follow the instructions supplied with your VCR to tune the VCR to your television Switching Your Television On and Off The mains lead is attached to the rear of the television Use a wall socket with depending on the model a Voltage of 220V 230V 240V or 100V 260V Frequency of 50Hz or 50 60Hz Plug the mains lead into an appropriate wall socket Press the On Off button POWER on the front panel to switch the television on Placing the Television in Standby Mode You can place your television in standby mode in order to reduce
4. To Then Continue searching without Press the or to continue searching respectively storing this channel forwards or backwards through the frequencies Store this channel 1 Press the V to select the Prog Press the or until the number by which you wish to identify the channel is displayed Press the V to select the Store 4 Press the or to store the channel Result is displayed 5 Press the V select the Search and press the or to start the search again Stop searching for channels Press the MENU repeatedly until the menus disappear Storing the Channels Automatically You can scan the frequency ranges available on your television and in your country and store all the channels found automatically The channels are stored in the order in which they appear in the frequency bands It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels If this is the case you can then sort them manually Menu Picture Setup Function Select Enter Exit If the television is in standby mode green Press the W to select the Setup light on press the POWER 5 on the remote control Press the Result Setup is displayed Press the MENU Result main on screen menu is displayed Setup Manual store Auto store CH skip Fine tune Sort Press the or until the ch
5. er COLOUR TELEVISION Owner s Instructions Before operating the unit please read this manual thoroughly and retain it for future reference REMOTE CONTROL MENU CONTROL TELETEXT FUNCTION Safety Instructions The following illustrations represent the precautions to be taken when using and moving your television Do NOT expose the television to Do NOT expose the television to Do NOT expose the television to any extreme temperature conditions direct sunlight liquids below 5 C and above 35 C or to extreme humidity conditions less than 10 and more than 75 If the television is broken do not try During a storm conditions especially If the remote control is not used for a to repair it yourself Contact qualified when there is lightning unplug the long period of time remove the service personnel television from the mains socket and batteries and store it in a cool dry aerial place NEVER OPEN THE TELEVISION Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE REAR COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Mains voltage 220V 230V 240V 50Hz Beware of high voltage Live parts are accessible Control range of mains section 100V 260V option when the rear cover is removed or indicated on the rear of the TV set Do not remove the rear cover System PAL B G The lightning flash an
6. Camcorder To connect different types of video equipment to your television use Connect the AV cable as explained on To watch television programmes while a the input connectors on the front page 4 cassette is playing press the TV CO on the and rear panels depending on the remote control model Switch your television on Result most recently watched channel is displayed Refer to Connections to the AV Start playing the cassette on the VCR or Inputs page 17 for a description camcorder To return to viewing the cassette press the of the various connection Result recorded pictures appear VIDEO amp on the remote control possibilities the television screen Result picture recorded on the VCR or camcorder cassette is displayed 19 l eletext Function Most television channels provide a written information service via Teletext They provide such information as Television programme times News bulletins Weather forecasts Contents Sports results Subtitles for the hard of A Selected page number hearing B Broadcasting channel identity C Current page number or search indications This information which you cannot D Dais gnd modify is divided into numbered ae anG UMG pages laid out as follows E Text F Status information There may appear different language on the screen from every rolling on the satellite b
7. To adjust the volume press the If there is a power failure move the on screen cursor right and increase the volume to move the on screen cursor left and reduce the volume Switching the Sound Off Temporarily 5 You can switch the sound off temporarily during a telephone conversation for example Press the MUTE To switch the sound back on press the Result sound is switched off and MUTE again or the MX symbol is displayed 12 GB Setting the Sleep Timer DISPLAY O69 SLEEP e 9 You can select a time period of between 15 and 180 minutes after which the television automatically switches to standby mode Co cO Press the SLEEP on the remote control Result If the sleep timer is The screen displays a clock symbol and the Already set Time remaining before the television will be placed in standby mode Not yet set Word 0 Press the SLEEP repeatedly until the appropriate length of time is displayed Result television is placed automatically in standby mode when the timer reaches 0 To cancel the Sleep Timer function press the SLEEP repeatedly until the word 0 is displayed Viewing Pictures from External Sources Rear of the TV depending on the model You can use your television to watch pictures recorded on a Video cassette recorder
8. BY INDICATOR A V INPUT SOCKETS VOLUME ADJUSTMENT Option BUTTONS REMOTE CONTROL SENSOR AERIAL INPUT SOCKET nfrared Remote Control STANDBY TELETEXT DISPLAY MIX TUNER CABLE NETWORK SELECTION DIRECT CHANNEL SELECTION EXTERNAL INPUT SELECTION TELETEXT MODE LIST FLOF SELECTION ON SCREEN DISPLAY TELETEXT REVEAL AUTOMATIC SWITCH OFF TELETEXT STORE ONE TWO DIGIT CHANNEL SELECTION TELETEXT HOLD PICTURE MODE SELECTION FASTEXT TOPIC SELECTION TELETEXT SUB PAGE TEMPORARY SOUND SWITCH OFF PICTURE SIZE NEXT CHANNEL j TELETEXT SIZE TELETEXT NEXT PAGE VOLUME DECREASE VOLUME INCREASE PREVIOUS CHANNEL J TELETEXT PREVIOUS PAGE MENU DISPLAY PROGRAMME SELECTION BY NAME 2 Operation of remote control may be affected by bright artificial light near to the TV set 19 AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present IMPORTANT NOTICE United Kingdom The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Repla
9. Power consumption Wear of the cathode ray tube The standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example The television is placed auto matically in standby mode when you turn it on Press the POWER 5 on the remote control Result screen is turned off and the green indicator on the front of the television lights up To switch the screen back on press the POWER 5 again Sjelecting the Language P SIZEC3 Press the MENU Result main on screen menu is displayed Menu Picture Setup Function Select Enter R Exit MENU Press the V to select the Function Press the Result Function is displayed GB P MENU iii ue D Y C P A STAND BY If you have Then you will see Already stored The channel selected channels when you last switched your television off Not yet stored No clear picture any channels You must now store the channels Press the On Off button POWER again to Switch the television off Y CP A e e e AND BY 2 your television in standby mode for long periods of time when you are away on holiday for example In this case you should switch it off completely Function Language English Press the until the required language is displayed Press the MENU repeatedly u
10. annel number that you wish to change is displayed Press the W to select the Auto store Press the Result When searching and storing is complete the Sort is displayed with the From The selected channel s picture is displayed Result Press the V to select the To Press the or until the new number by which you wish to identify the channel is displayed Result selected channel is exchanged with the one specified Example If you select 3 for the From and 1 for the To Channel becomes Channel 1 Channel 1 becomes Channel To Then Confirm the Store exchange 1 Press the V to select the Store 2 Pressthe or Result OK is displayed You can exchange other channel numbers by selecting the From and returning to Diagram 4 Cancel this change but Select the From and return to Diagram 4 continue sorting the channels When you have finished sorting the channels press the MENU until the menus disappear GB Skipping Unwanted Channels Menu You can exclude the channels of Picture d store your choice from the channel scan iN Auto store operation When you scan through Select Fine tune the stored channels those that you Enter eB Sort have chosen to skip are thus not Ext MENU displayed All channels that you do not Press the MENU Use the Y and to display the CH skip Result main on screen m
11. bottom of the screen gt The LIST button is used to Switch between the LIST mode FLOF mode DISPLAY CO D 8 9 G SLEEP Press the STORE to store the corresponding pages until the corresponding blocks are displayed in white CO CO P SZEC 26 9 To display the Press the Previous page Red button Next page Green button When you have finished press the TV CO to return to your normal broadcast Press the coloured button corresponding to the page that you wish to replace Enter the new page number using the numeric buttons gt Repeat step 2 for each page to be stored using a different coloured button each time Connections to the AV Inputs gt gt AV connector on the rear of the television is used for equipment with an RGB output such as video games video disc players and personal computers Rear of the TV AV Cable depending on the model RCA type O ourPuT O VIDEO AUDIO aD SCART type O oUrPuT O VIDEO AUDIO Lo RCA type Front of the TV Option AV Cable RCA type ad p eee D VIDEO IN AUDIO gt The AV connector on the front of the television is used for equipment such as camcorders video disc players and certain video games
12. cement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitable safety approved extension lead or consult your dealer for assistance However if there is no alternative to cutting off the plug remove the fuse and then safely dispose of the plug DO NOT connect the plug to a mains socket as there is a risk of electric shock from the bared flexible cord IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW ras AA68 00658A ENG
13. control repeatedly until the required picture size is displayed m Normal gt Zoom 16 9 Option lt To view in Select Standard format Normal ZOOM video format Zoom 16 9 format 16 9 gt e The Normal picture size is selected automatically when you switch the television on If you are watching pictures from your VCR via the Video mode AV input the 16 9 picture size cannot be selected option Selecting the Sound System Option If you cannot obtain clear sharp Function sound when receiving a television Setup Language English Function Sound system broadcast you may need to select 0 Select a different sound system Enter B Exit MENU gt D K I and M are sound signal broadcast systems applicable to different Press the MENU Use the V and to display the Function countries Result main on screen menu is displayed Press the A to select the Sound system Function Language English 7 3 DK Sound system B G A Option Press the repeatedly until the sound is of Press the MENU repeatedly until the the best quality menus disappear Result sound system is changed 11 Ndjusting the Volume The volume setting is memorised When you place the television in standby mode When you switch the television off using the On Off button POWER on the front panel
14. d arrowhead within PAL I UHF ONLY the triangle is a warning sign alerting you PAL B G SECAM B G rd rous voltage inside the product PAL B G D K SECAM B G D K Ho the produc PAL I WITH VHF BAND PAL B G D K SECAM B G D K NTSC4 43MHz The exclamation point within the triangle is PAL B G SECAM B G SECAM L L a warning sign alerting you to important SA DAC K BiG BIRTNUTSOS A D RMEGE instructions accompanying the product You have just purchased a SAMSUNG television Please take the time to read these instructions as they will enable you to set up your television easily Contents CONNECTING AND PREPARING YOUR TELEVISION Safety Instructions esses eene nennen nennen nnne nnns Luc Inserting the Batteries in the Remote Connecting the Aerial or Cable Television Connecting a sciret dien Switching Your Television On and Off Placing the Television in Standby Selecting the Language essere nennen Becoming Familiar With the Remote Control and Menus Using the Front Panel Controls eesseseeeneeneenene
15. ees Removing Colour Patches Automatic Degaussing Front and Rear Panels scccccccecceecccessesseeccceeeeeeceeaaesneceeeeseeeeseaeananeess Infrared Remote Controls 2 ee Deere eoa PORE US ceased A e Press Important Note oO 0010101 A KR HRM PY ON 10 11 11 12 12 13 13 14 14 15 16 16 17 18 18 19 19 GB nserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you Purchase the television Find that the remote control is no longer operating correctly Remove the cover of the remote control by pressing the symbol P3 s and pulling the cover in the direction of the arrow Insert AA or equivalent type batteries taking care to respect the polarities the battery with on the remote control onthe battery with on the remote control Replace the cover by pushing it in the direction of the arrow Connecting the Aerial or Cable Television Network To view television channels correctly a signal must be received by the set from one of the following sources An outdoor aerial Acable television network Connecting a VCR Depending on your model you can connect a VCR to the television using a Coaxial cable SCART audio video cable RCA audio video cable
16. enu is Result All the channels are listed in specifically choose to skip are displayed A numerical order displayed during scanning Use the V and to display the Setup CH skip P 0 Added P 1 Added P 2 Erased P 3 Added The list displays only four channels at a time To display the Press Next four channels when the selection bar is on the last channel listed Previous four channels A when the selection bar is on the first channel listed To Press The channel is Select the channel V A Highlighted Erase a channel so that it will be skipped over Erased during scanning Add a previously erased channel so that it will be Added displayed during scanning When you have finished press the MENU repeatedly until the menus disappear Pine tuning Channel Reception 2 If reception is clear you do not TON have to fine tune the channel as Auto store this is done automatically during CH skip the search and store operation En ind P4 UHF nnn If however the signal is weak or distorted you may have to fine tune the channel manually Press the MENU Use the and to move the fine tuning The fine tuning st r d Result di main on screen menu is cursor until you obtain a sharp clear picture liannel cannot be store isplayed and good sound quality gt fyou do not press either button Use the V and to display the Setup and within two seconds t
17. followed by 2 Using the Front Panel Controls 1 If your remote control no longer works or you have lost it you can use the controls on the front panel of the television to Change channels MENU 24 YCOPOA Adjust the volume Select options from the on screen menus Choose the Video mode Press the A V to switch to the video mode 499 lt gt 0 lt gt D 1 lt gt 2 eeeccc c o The symbols representing the controls on the front panel are the same as those used on the remote control GB Storing the Channels Manually Menu Picture Setup Function When storing channels manually you can choose Whether or not to store each of the channels found Select VA Enter E Exit MENU The number by which you wish to identify each stored channel KM If the television is in standby mode green Press the V to select the Setup light on press the POWER 5 on the remote control Press the MENU Result The main on screen menu is displayed Setup Manual store Manual store Search R Auto store Prog No P 1 CH skip Store EI Fine tune Sort Press the Press the again Result Setup is displayed with the Result Manual store is displayed Manual store Press to start searching forwards through the frequencies start searching backwards When a channel is found the Manual store is displayed again
18. he fine tuning then select the Fine tune cursor disappears and the Setup is Result channel number and redisplayed If this happens reselect frequency band are displayed the Fine tune horizontal above horizontalcursor When you have finished press the MENU repeatedly until the menus disappear Ndjusting the Picture Several settings are available on ae o miras your television to enable you to Setup i Function Brightness control the quality of the picture Sharpness Contrast 9 E i z Colour nter i E i ontrast 07 Exit MENU Tint Brightness XX Sharpness D Press the MENU Press the to display the Picture Colour Q Result main on screen menu is displayed with the Picture Press the V or A to select the required Tint for NTSC signal option option 3 Your settings are only memorised if you have selected the Custom picture standard for details a T refer to Choosing the Picture Standard Otherwise they are lost when To move the on screen cursor Press You switch the television off Left and reduce the value of the selected option using the On Off button POWER on the front panel Right and increase the value of the selected option There is a power failure When you have finished press the MENU repeatedly until the menus disappear gt Yourtelevision contains an automatic degau
19. ntil the menus disappear Becoming Familiar With the Remote Control and Menus WO The remote control is used to VIDEO Change channels and adjust the DISPLAY sound and picture while 1 viewing programmes D SLEEP Set up the television using the on screen menu system Button Viewing Function Menu Function The table opposite presents the most frequently used buttons and A Used to display the Used to select the previous menu option their functions next stored channel i v Used to display the Used to select the next menu option previous stored channel t Used to increase the Used to volume Display a submenu containing selections that you can make for the current menu option Search forwards manually for channels Increase the value of a menu option Used to reduce the Used to volume Display a submenu containing selections that you can make for the current menu option Search backwards manually for channels Reduce the value of a menu option MENU Used to display the Used to exit the on screen menus and on screen menu system return to normal viewing 0 9 Used to display the Used to exit the menu system and display corresponding channels the corresponding channel directly l Used to enter a two digit channel number Press this button a second time to enter one digit numbers again Example To select channel 42 press 4
20. play on a given page press the HOLD incremented and the page is then displayed m umo 6 oe Using the various display options amp 3 Press the HOLD again to resume To display Press Both the Teletext information and the normal broadcast TTXMIX twice Hidden text RECALL answers in questionnaire once games for example The screen normally again RECALL again A secondary page by entering its 4 digit number SUB PAGE The next page PAGE UP The previous page PAGE DOWN amp 3 Double height letters in the SIZE 69 Upper half of the screen Once Lower half of the screen 9 Twice The screen normally Three times 15 Using FLOF to Select a Page The different topics covered ona Teletext page are colour coded and can be selected by pressing the coloured buttons on the remote control Display the Teletext contents page by pressing the TTX MIX Press the coloured button corresponding to the topic that you wish to select the available topics are given on the status line Result The page is displayed with other coloured information that can be selected in the same way Storing Teletext Pages You can store up to four Teletext pages to display them later at leisure 16 DISPLAY 9 Select the LIST mode Result Four 3 digit numbers are displayed in different colours at the
21. roadcasting Displaying the Teletext Screen PSZO 7 m POWER You can display Teletext information at any time on your television screen TO NE W O00 For Teletext information to X 3 e be displayed correctly channel must be Select the channel providing the Teletext If you wish to display the actual broadcast good otherwise service using the A amp or V on the selected channel at the same time as the Teletext page press the TTX MIX Press the TTX MIX to activate the EJ C3 once Teletext mode Some pages may not be Result contents page page 100 is When you have finished press the TV CO Information may be missing displayed displayed It can be redisplayed continue viewing normally at any time by pressing the To activate the Teletext mode and INDEX display the contents page follow the instructions 14 Selecting a Page by Number You can enter the page number directly by pressing the numeric buttons on the remote control OKO em TSP SLEEP D 0 amp Enter the three digit page number given in the contents by pressing the corresponding numeric buttons Result The current page counter is P EX 26 If the selected page is linked with several secondary pages the secondary pages are displayed in sequence To freeze the dis
22. rol batteries Clean the upper edge of the remote control transmission window Check the battery terminals Check that the remote control sensor on the front of the television is not obstructed Check that there is not a bright lamp close to the television that is attenuating the remote control signal and preventing it from being detected by the television Irregular colour purity problem See below rjemoving Colour Patches Automatic Degaussing A degaussing coil is mounted around the picture tube so you do not normally need to degauss the television manually If you move the television to a different position and colour patches appear on the screen you must Switch the television off by pressing the On Off button POWER on the front panel Unplug the television from the wall socket Leave the television for two hours to allow the automatic degauss function to take effect ag Always make sure that the television is switched off by pressing the On Off button POWER if it is to be left unattended 19 QB Pront and Rear Panels Front of the TV Rear of the TV gt Buttons and markings are subject to change without notice depending on the model O ovreur O VIDEO AUDIO VIDEO AUDIO i STAND BY EARPHONE MENU BUTTON CHANNEL ON OFF BUTTON SCART INPUT RCA INPUT SOCKET ADJUSTMENT CONNECTOR CONNECTORS Option BUTTONS STAND
23. ssing system that is activated when the picture colours are affected by magnetic interference To degauss your television screen turn the set off by pressing the On Off button POWER and leave it turned off for at least two hours Refer to page 18 for further details Choosing the Picture Standard nd 2 Y 9 Custom ou can use your remote control SLEEP to select the type of picture that 9j best corresponds to your viewing requirements o ms e LA MUTE Standard Press the P STD on the remote control repeatedly until the required mode is displayed Dynamic gt Custom gt Standard d Movie Mild lt Movie Dynamic Mild Result Each time you press this button the name of the selected picture standard is displayed for five seconds gt The contrast brightness sharpness colour and tint option settings of the first five modes are preset and any changes that you make will be lost when the television is switched off by the On Off button POWER on the front panel Changes made to these settings while the Custom mode is selected are memorised and are recalled when you switch the television back on 10 QB Changing the Picture Size P SIZEQD 2 You can modify the vertical V Normal dimensions of the displayed picture in order to watch programmes in ZOOM or 16 9 format Press the P SIZE on the remote
Download Pdf Manuals
Related Search