Home

Samsung 226CW User Manual

1. 3 Do not use a damaged or loose plug This may cause electric shock or fire Do not pull the plug out by the wire nor touch the plug with wet hands This may cause electric shock or fire 3 Use only a properly grounded plug and receptacle An improper ground may cause electric shock or equipment damage Class Equipment only 3 Insert the power plug firmly so that it does not come loose A bad connection may cause fire 3 Do not bend the plug excessively and wire nor place heavy objects upon them which could cause damage This may cause electric shock or fire 3 Do not connect too many extension cords or plugs to one outlet This may cause fire 3 Do not disconnect the power cord while using the monitor A surge may be caused by the separation and may damage the monitor 3 Do not use the power cord when the connector or plug is dusty If the connector or plug of the power cord is dusty clean it with a dry cloth Using the power cord with a dusty plug or connector may cause an electric shock or fire 3 To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable Installation This may cause electric shock or fire Notation Power Installation Cleaning and Use Others Be sure to contact an authorized Service Center when installing your monitor in a loca
2. Failing to do so may damage the monitor NG 3 Do not place the monitor face down This may damage the TFT LCD surface 3 The installation of the bracket must be done by a qualified professional Installing the bracket by unqualified personnel may result in injury Always use the mounting device specified in the owner s manual When installing the product make sure to keep it away from the wall more than 10 cm 4 inches for ventilation purposes Poor ventilation may cause an increase in the internal temperature of the product resulting in a shortened component life and degraded performance 3 Do not disconnect the power cord while using the monitor A surge may be caused by the separation and may damage the monitor 3 Keep the plastic packaging bag out of children s reach The plastic packaging bag may cause suffocation if children play with it Notation Power Installation Cleaning and Use Others 3 Cleaning and Use When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric 3 Do not spray water or detergent directly onto the monitor This may cause damage electric shock or fire 3 Use the recommended detergent with a smooth cloth 3 If the connector between the plug and the pin is dusty or dirty clean it properly using a dry cloth A dirty connector may cause electric shock or fire 3 Make sure to unplug the power cor
3. If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically 3 OSD Lock amp Unlock D Incase of pushing AUTO button after locking OSD MENU OO a F Ao SOURCE gt AUTO bo 1 Pi at D Incase of pushing MENU button after locking OSD MENU OO ita FF Ao SOURCE e AUTO der J Menu Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Locked Hold down the menu button for more than five seconds to activate the OSD adjustment lock function OSD Locked amp Unlock Unlock Hold down the menu button for more than five seconds to deactivate the OSD adjustment lock function Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adjust MagicBright il using the Direct button 3 MagicBright Menu MagicBright D Brightness MENU O a YF A SOURCE CF AUTO Description Push the MagicBright button to circle through available preconfigured modes seven different modes Custom Text Internet Game Sport Movie Dynamic Contrast Menu Brightness MENUS OO Sa WF AUS SOURCE E AUTO Description When OSD is not on the screen push the button to adjust brightness 3 SOURCE 3
4. 6 Wait until the Uninstall Complete dialog box appears Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades Monitor Driver Natural Color MagicTune ImageViewer es Installation 10 Insert the installation CD into the CD ROM drive Click the Imageviewer installation file Select installation Language Click Next When the Installation Shield Wizard window appears click Next Select agree to the terms of the license agreement to accept the terms of use Choose a folder to install the Imageviewer program Click Install The Installation Status window appears Click Finish When the installation is completed the Imageviewer executable icon appears on your desktop Double click the icon to start the program ges Removing the Program You can only remove ImageViewer by using the Add Remove Programs applet To remove ImageViewer follow these steps 1 Click on the Start menu and Settings and then the Control Panel For Windows XP click on the Start menu and then the Control Panel Double click the Add Remove Programs icon on the Control Panel Select ImageViewer by clicking on it on the Add Remove Programs window You may need to scroll down to find it Click Change Remove Click Yes to start removing ImageViewer Wait until the message that the removal is finished is displayed You should restart
5. Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button 9 Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box O Microsoft Windows NT Operating System ls Click Start Settings Control Panel and then double click Display icon In Display Registration Information window click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency X If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide 3 Linux Operating System ls To execute X Window you need to make the X86Config file which is a type of system setting file Press Enter at the first and the second screen after exec
6. Have you installed the monitor driver Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product Windows XP Set the resolution at the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution at the Control Panel Display Settings Set the video card by referring to the video card manual Install the monitor driver according to the Driver Installation Instructions reads Unrecognized monitor Plug amp Play VESA DDC monitor found Check when MagicTune does not function properly MagicTune M doesn t work properly See the video card manual to see if the Plug amp Play VESA DDC function can be supported MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card Did you install the program Install the monitor driver according to the Driver Installation Instructions To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel Performance and Maintenance System Hardware Device Manager Monitors After deleting Plug and Play monitor find Plug and Play monitor
7. SYSTEM 245 e Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 minutes Ex SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK Every 30 minutes change the characters with movement Pa a PATA rs IE APA KA1710 12 00 KA1710 12 00 b gat D S 1419 UA0110 13 30 11AN110 12 20 AA0002 14 00 FA7777 14 15 2 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Common Electrode ITO Black Matrix Color Filter Pixel Electrode Storage Capacitor ITO Cs Our LCD Monitor satisfies ISO13406 2 Pixel fault Class Il
8. button S SAMSUNG monitor metaller Select the display adapter on which you wari lo intall he monitor RADEON 3650 Pug and PinyMortor a Select the moadonshich sexu vest bo ingtali If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The softwaee you are installing for this hardware Samsung CTET has not passed Windows Logo besing to wenhy its compahkdiy with Windows XP Tell mg why the testing ts important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends hal pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing contin arney STOP mainion This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Monitor driver installation is completed 3 Installing the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux 2 Microsoft Windows Vista Operating System ls Insert your Manual CD into your CD ROM drive amp Click 9 Start and Control Panel Then double click on Appearance and Personalization
9. by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune Download the latest program The program can be downloaded http www samsung com monitor magictune Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program Visit the MagicTune website and download the installation software for MagicTune MAC 3 Check the following items if there is trouble with the monitor Check if the power cord and the video cables are properly connected to the computer 3 Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer 3 f you installed a new video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver Check if the scanning ratio of the video screen is set to between 56 Hz 75 Hz Do not exceed 60 Hz when using the maximum resolution Ifyou have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display
10. 10 SAMSUNG 7267864 http www samsung com ph SINGAPORE 1800 SAMSUNG 7267864 http www samsung com sg THAILAND 1800 29 3232 02 689 3232 http www samsung com th TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com vn Middle East amp Africa SOUTH AFRICA 0860 7267864 SAMSUNG http www samsung com za 800SAMSUNG 7267864 U A E 8000 4726 http www samsung com mea Contact SAMSUNG WORLDWIDE Terms For Better Display Authonty 3 Terms D Dot Pitch 3 The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm 3 Vertical Frequency 3 The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz D Horizontal Frequency 3 The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz D Interlace and Non Interlace Methods 3 Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and the
11. H x 296 1 mm V Pixel Pitch 0 282 mm H x 0 282 mm V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 7M Colors Resolution Optimum resolution 1680 X 1050 60 Hz Maximum resolution 1680 X 1050 60 Hz Input Signal Terminated RGB Analog DVI Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite SOG TTL level V high 2 0V V low lt 0 8V Maximum Pixel Clock 146 MHz Analog Digital Power Supply AC 100 240V 10 50 60Hz 3 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Option Dimensions W x H x D Weight 514 6 X 353 3 X 63 0 mm 20 2 x 13 9 x 2 4 inch Without Stand 514 6 X422 0 X 219 3 mm 20 2 x 16 6 x 8 6 inch With Stand 5 7 kg 12 5 Ibs VESA Mounting Interface 100 mm x 100 mm for use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptabl
12. OSD Function Menu SOURCE Picture Color Image OSD Setup Information MENU OO ia F F What SOURCE fe AUTO Description Selects the Video signal while the OSD is off Analog Digital Brightness Color Innovation Coarse Language Auto Source Contrast Color Control Fine H Position Image Reset Control Buttons Direct Functions OSD Function Gamma Sharpness H Position V Position V Position Transparency Display Time Color Reset RTA lE Picture Not available in MagicBright mode of Dynamic Contrast ah Menu Brightness Contrast MENUS CD aw AE SOURCE E AUTO e y ra Description Play Stop You can use the on screen menus to change the brightness according to personal preference Direct Access Feature When OSD is not on the screen push the button to adjust brightness 53 Click here to see an animation clip Q29 MENU gt 1 gt H gt 4 Y gt MENU You can use the on screen menus to change the contrast according to personal preference Q Q MENU gt 2 gt 4 gt 2 gt MENU 3 Color Not available in MagicBright mode of Dynamic Contrast lk MENU OO Sa YF Ao SOURCE fF AUTO Menu Description Play Stop Color Innovation function provides optimized color for personal favor to view effectively with WCG CCFL which was applied to Samsung Electronics for the first time Brilliant If you select Brilliant you can view a
13. Paa BK ape ES m e sk be patte ered deiis sedi Th bett dree bound ball be palakol Seach removable meda Goon COM Irchades this Igcation in the pesech ai opo ba the devace drea hom a fist windows does nor guarantees that AE beret match for pour hache ef JE mes Cara Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk ineei tre maru achuer s installation dak and then make sure thal the conect dime 6 selected below Copy manulachuser s fes from i Har dure Update Wizard Selec the dower dire you want lo malal Fes Ibiza hirden zd Tiesi the rani acturer ared rrescel ol your hanfesain carence ael eer ich Hes P psa hast dik hu ona Heus diesel von mars hs iba ekek Hase Desk Medi Samsung sawa Pia Vhis dona io rend digitally signi Tel ma ste derent nina it imocrtant If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation The software you ane installing for this hardware Samsung saw has not passed Windows Logo testing to very ib compatibili writs insons SP Tell rrt wakes thiet bastig bs potant Continuing pour installation of this software mag impir or destabilize the comeci operation of your system either immediately or m the future Microsoft strongly recommends thal gow
14. al baa PDI Pare E am mg ds iam comes gud Pee b T iyt i a HR GS UE DE mara lara sl Ki Karin el dalam o EBAL Le RUP LR arm mim Pig J hika Cyrus Le Click Personalization and then Display Settings ma jf CC io E Bea meee P gend iuum Sas s sis mimi mi L FU tansi RE Loue lr ramum pega a ee rn cam ce gna E a ee r Wm i qi a cts ed AG D pins be a a ee a E ee gran ec ee Jun roa ee a oe ag a a a a a Ey dei Bus Ta Emr Se ee Se ee uem Se eo DU e me a ag zi ird A Pa a oar nec uda onem mansi Ll ai PA P iux em mim semer mem iar cuum oe Click Advanced Settings ez Dang She Kora bo month par preter Latio Merstors on MIDIA GeForce NG LE felirati Cor en O Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue Tara TU Adapter a aa Monster Type V XE Windows needs your permission uv contibnua A rar PnP Morir pote Pride PUT re RA PAS LI Gann Era check baa dala you tc marier aaplay metam Sue Ban Continue Cancel delay Comet fey This amay leid 5a an ure conco Pope haa User Account Control helps sop una
15. and Play Tar ES GeFocel Selection i Coker Comection Diver General Adapter Morito Tiroubleshoct Color Management Manor type E Pha arid Fiap I ceri or Phu and Play Monitor Hora echas Glandand mentor type Locator on 3D Piophei IH Eusvice dris This dawa ix saking proper C Hide modes that his moria carrot daplay p Cheng hin check bow alkar vou lo qeleck ikrak thia IN yoh ata Aang problems pah thie devica chek Troubleshoot to agen docks conect This mag kad bo sn uenisse Eats roel Tan os Epai __ isle Miisa R cewhowr eue Soren eth naka 60 Hentz Lia Men chanson raha Welcome to the Hardware Update Wizard Aro Plug ard Play Morsdor 5 31 20601 0 Misrosont Windowe 20 ubir If pow harden come with an makaiistion CO ir Hopog disk ingot ib now Tao es ste aa ha deben an what de pou waned the weed In do tm dicen Ta gets es ajea dos iha diad IF iho evene Nadi alter thus dies poll Bask bo ihe ied rare a bye chorea 9 Select Don t search will then click Next and then click Have disk Hardware Update Wizard Har dwarg Update Wizard Piese choose pma soarch and inzlallalion options Balet the device drives pou wani b install los this hanhaare C Seach koa the bani diva in these locant E Select the manulactuer and modal of your haidesaee devis and than ekek Masi yeu Coni sina waant lo natali clik H Ha bakas kena
16. dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly If the display exceeds WSXGA or 75 Hz a Not Optimum Mode Recommended Mode 1680 X 1050 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly but the Not Optimum Mode Recommended Mode 1680 X 1050 60 Hz message appears for one minute and then disappears Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted The monitor is in PowerSaver mode Press a key on the keyboard to activate the monitor and cannot see the On Screen Display The screen shows strange colors or just black and white The screen suddenly has become unbalanced The screen is out of focus or OSD cannot be adjusted LED is blinking but no images on the screen There are only 16 colors shown on the screen The screen colors have changed after changing the video card There is a message that indicator on the monitor blinking at 1 second intervals Connected using the DVI cable Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Have the screen colors becom
17. images For more information refer to Help F1 in the software program G How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program Natural Color will be executed Click Natural Color on the initial screen to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Run Enter D color NCProSetup exe and then press the Enter key If the drive where the CD is inserted is not D enter the applicable drive 3 How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button Monitor Driver Natural Color MagicTune ImageViewer MagicTune HELP Installation Insert the installation CD into the CD ROM drive Click the MagicTune installation file Select installation Language Click Next When the Installation Shield Wizard window appears click Next Select agree to the terms of the license agreement to accept the terms of use Choose a folder to install the MagicTune program Click Install The Installation Status window appears Click Finish When the installation is completed the MagicTune executable ico
18. more natural video display RTAOn Activates the RTA function so that the panel operates at a higher response speed than its original speed RTAOFF Deactivates the RTA function so that the panel operates at its original response speed Features Package Contents Your Monitor 3 Package Contents Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items D Unpacking Without Stand Monitor With Stand eu Monitor amp Simple stand 3 Manual Warranty Card Us Guide Monitor Diver Quick Setup Guide Not available in all ma MagicTune software locations ImageViewer D Cable Power Cord D sub Cable D Others A zc NN Cleaning Cloth This is an accessory that can be added depending on the model 3 Sold separately DVI Cable Features Package Contents Your Monitor 3 Your Monitor 3 Front MENU button I MagicBright button aa Opens the on screen menu and exits from the menu MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently seven different modes are available Custom Text Internet Game Sport and Movie Dynamic Contrast Each mode has its own pre configured brightness value You can easily select one of seven settings by simply pressing MagicBright con
19. 40 74 551 57 284 75 062 100 000 72 809 31 500 75 000 31 500 56 250 36 000 60 317 40 000 72 188 50 000 75 000 49 500 60 004 65 000 70 069 75 000 75 029 78 750 75 000 108 000 60 000 108 000 75 025 135 000 59 883 119 000 Sync Polarity H V Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Model SyncMaster 226CW The color and appearance of the product may yary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement mn i M Safety Precautions Bm Connections B Specifications a Introduction 2 Troubleshooting O Information Contact SAMSUNG WORLDWIDE Terms a Using the Software m Adjusting the Monitor Information For Better Display Authority 3 Contact SAMSUNG WORLDWIDE X f you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center North America U S A 1 800 S
20. AMSUNG 7267864 http www samsung com CANADA 1 800 SAMSUNG 7267864 http www samsung com ca MEXICO 01 800 SAMSUNG 7267864 http www samsung com mx Latin America ARGENTINE 0800 333 3733 http www samsung com ar BRAZIL 4004 0000 http www samsung com br CHILE 800 726 7864 SAMSUNG http www samsung com cl COLOMBIA 01 8000112112 http www samsung com co COSTA RICA 0 800 507 7267 http www samsung com latin ECUADOR 1 800 10 7267 http www samsung com latin EL SALVADOR 800 6225 http www samsung com latin GUATEMALA 1 800 299 0013 http www samsung com latin JAMAICA 1 800 234 7267 http www samsung com latin PANAMA 800 7267 http www samsung com latin PUERTO RICO 1 800 682 3180 http www samsung com latin REP DOMINICA 1 800 751 2676 http www samsung com latin TRINIDAD amp TOBAGO 1 800 7267 864 http www samsung com latin VENEZUELA 0 800 100 5303 http www samsung com latin Europe BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL REPUBLIC OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U K CIS ESTONIA LATVIA LITHUANIA KAZAKHSTAN RUSSIA UKRAINE UZBEKISTAN Asia Pacific AUSTRALIA CHINA HONG KONG 02 201 2418 844 000 844 Distributor pro Ceskou republiku http www samsung com be http www samsung com cz Samsung zrt Ceska organizacni slo
21. Adapter in the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver f problems repeatedly occur contact an authorized service center Check List Q amp A Self Test il Q amp A Question Answer How can change the frequency The frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details Windows XP Set the resolution in the Control Panel Appearance and Themes gt Display Settings How can adjust the resolution Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Windows ME 2000 Set the resolution in the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer X Refer to the Windows Computer Manual How can clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Check List
22. Q 5 sec 10 sec 20 sec 200 sec MENU sa T gt 6 23 gt F gt MENU MENU OO a YF Ao SOURCE f AUTO Description Play Stop Select Auto Source for the monitor to automatically select the signal source Q Q MENU 4 F gt H 2 gt Y gt MENU Image parameters are replaced with the factory default values 2Q MENU a gt H gt a 5 gt F MENU Color parameters are replaced with the factory default values Q MENU gt amp F gt 4 gt a FL 23 F gt MENU RTA Response Time Accelerator A function that accelerates the response speed of the panel so as to provide a sharper and more natural video display RTA On Activates the RTA function so that the panel operates Q Q at a higher response speed than its original speed RTA Off Deactivates the RTA function so that the panel operates at its original response speed MENU a F gt a TS Sa F gt MENU D Information ik MENU OO aA Ao SOURCE fe AUTO t y E Menu Description Shows a video source display mode on the OSD screen Information MENU 4 Y M Safety Precautions B Adjusting the Monitor Troubleshooting 3 Check List Model SyncMaster 226CW The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement a Introduction Troubleshoo
23. Q amp A Self Test 3 Self Test Self Test Feature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly 3 Self Test Feature Check lk Tum off both your computer and the monitor Unplug the video cable from the back of the computer Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly 3 Warning Messages lk If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode 1680 x 1050 60Hz 3 Environment as The location and the position of the monitor may influence the quality and other features of the monitor If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room Remove all electroni
24. al to build up in a certain areas of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 Type 1 lt gt KI Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference in luminance Black amp White Grey Ex
25. ate Normal Operation Power saving mode Power button EPA ENERGY 2000 Power Indicator Blue Blue Blinking Black Power Consumption Less than 50 W Less than A Less than 1 W 3 Preset Timing Modes D Preset Timing Modes ENERGY STAR Off mode This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality As an ENERGY STAR Partner SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency specifications PowerSaver Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Display Mode IBM 640 x 350 IBM 640 x 480 IBM 720 x 400 MAC 640 x 480 MAC 832 x 624 MAC 1152 x 870 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1152 x 864 VESA 1280 x 960 VESA 1280 x 1024 VESA 1680 x 1050 Horizontal Frequency KHz 31 469 31 469 31 469 35 000 49 726 68 681 37 861 37 500 35 156 37 879 48 077 46 875 48 363 56 476 60 023 67 500 60 000 79 976 64 674 es Pixel Clock Hz MHZ 70 086 25 175 59 940 25 175 70 087 28 322 66 667 30 2
26. c devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor 3 Useful Tips ih A monitor recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the monitor to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1680 X 1050 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition In this case check the computer for trouble Model SyncMaster 226CW The color and appearance of the product may yary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Safety Precautions Introduction Bm Connections a Using the Software E Adjusting the Monitor B Troubleshooting B Specifications a Information O Specifications Specifications PowerSaver Preset Timing Modes 3 Specifications General Model Name SyncMaster 226CW LCD Panel Size 22 Wide Diagonal 55 cm Display area 473 8 mm
27. cable Use this button for auto adjustment 2 Click here to see an animation clip Use this button for turning the monitor on and off This light glows blue during normal operation and blinking blue once as the monitor saves your adjustments See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The configuration at the back of the monitor may vary from product to product AUTO button 3 Power button 0 Power indicator D Rear POWER port DVI IN HDCP port RGB IN port Kensington Lock Connect the power cord for your monitor to the power port on the back of the monitor Connect the DVI Cable to the DVI IN HDCP port on the back of your monitor Connect the signal cable to the 15 pin D sub port on the back of your monitor The Kensington lock is a device used to physically fix the system when using itin a public place X The locking device has to be purchased separately For using a locking device contact where you purchased it See Connecting Cables for further information regarding cable connections Model SyncMaster 226CW The color and appearance of the product may Yary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement B Sa
28. can adjust the tilt anigle within a range of 0 forward to 23 backward for the most comfortable viewing angle 3 Attaching a Base This monitor accepts a 100 mm x 100 mm VESA compliant mounting interface pad A Monitor B Mounting interface pad Sold separately Turn off your monitor and unplug its power cord Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen Remove four screws and then remove the stand from the LCD monitor oo o6 Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm type base wall mount hanger or other base Do not use screws longer than the standard dimension as they may damage the inside of the Monitor For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to m
29. cy clock speed MENU gt A a v Y gt MENU Changes the clearance of image MENU a gt El gt gt a Y MENU Changes the horizontal position of the monitor s entire display MENU a gt Ea 5 3 F gt MENU Changes the vertical position of the monitor s entire display MENU a 23 gt gt A Y MENU MENUS Oita YF Ao SOURCE fF AUTO ie J 2 Description You can choose one of nine languages English Deutsch Espa ol Fran ais Italiano Svenska PYCCKHH Portugu s T rk e X The language chosen affects only the language of the OSD It has no effect on any software running on the computer MENU 4 gt 2 gt 2 gt MENU You can change the horizontal position where the OSD menu appears on your monitor MENU 4 T gt El 23 F gt MENU 2Q 2Q Q 209 Play Stop 29 09 V Position Transparency Display Time 3H Setup si Menu Auto Source Image Reset Color Reset RTA You can change the vertical position where the OSD menu appears on your monitor F Q MENU gt T gt H sa gt 4 gt MENU Change the transparency of the background of the OSD 2Q MENU sa T gt Ea 9 F MENU The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it is turned off Q
30. d before cleaning the product Otherwise this may cause electric shock or fire 3 Unplug the power cord from the power outlet and wipe the product using a soft dry cloth Do not use any chemicals such as wax benzene alcohol thinners insecticide air freshener lubricant or detergent Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year Keep the product s interior clean Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire Notation Power Installation Cleaning and Use Others 3 Others Do not remove the cover or back E This may cause electric shock or fire Refer to a qualified servicing company If your monitor does not operate normally in particular if there is any unusual sound or smell coming from the monitor unplug it immediately and the Service Center This may cause electric shock or fire Keep the product away from places exposed to oil smoke or moisture do not install inside a vehicle This may cause a malfunction electric shock or fire In particular avoid operating the monitor near water or outdoors where it could be exposed to snow or rain If the monitor is dropped or the casing is damaged turn the monitor off and unplug the power cord Then contact the Service Center The monitor may malfunction causing electric shock or fire Disconnect the pl
31. e TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problelms For example the number of TFT LCD sub pixels contained in this product are 5 292 000 X Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use 3 This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment Specifications PowerSaver Preset Timing Modes 3 PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use the software utility installed on your computer to set up this feature Power off St
32. e strange after running a program or due to a crash between applications Has the video card been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the monitor restore the image on the screen If there is still no image press the SOURCE button Then press any key on the keyboard again to activate the monitor and restore the image on the screen You may get a blank screen if you boot the system before you connect the DVI cable or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals Connect the DVI cable and then reboot the system Unlock the OSD by pressing the MENU M button for at least 5 seconds Check the signal cable connection Make sure the video card is fully inserted in it s slot Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Have the Windows colors been set properly Has the video card been set properly
33. ea SyncMaster 226CW Safety Precautions Introduction Connections Install driver Install programs bb mU Windows hb W Natural Color bb docte MagicTune Pb ee ImageViewer Model SyncMaster 226CW The color and appearance of the product may Yary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Safety Precautions Introduction Bm Connections a Using the Software E Adjusting the Monitor B Troubleshooting B Specifications a Information O Safety Precautions Notation Power Installation Cleaning and Use Others 3 Notation Please read the following safety instructions as they are designed to prevent damage to property and harm to the user Wm Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment E Notational Conventions G Prohibited GO Do not disassemble Q Do not touch Important to read and understand at all times Disconnect the plug from the outlet Case Ground to prevent an electric shock Notation Power Installation Cleaning and Use Others 3 Power When not used for extended period of time set your computer to DPMS If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions
34. ero haac sulo Ad upetated esos der sofa ihi retine ues anos arii aralan ur serene Rain aoa Fos Fern iran A Sampung exem iru decisa adi a ip back 15 ha prana 00 natis Pe tamcn enim Thara Pa deum Ubri V pde modes that the monitor cannot display Chemin tu chick bok allows you in pd daciry modes that the HEY KAO APAT crac Nee oY BAG wein une du ciry ander damaged hardware 2 Microsoft Windows XP Operating System aii Insert CD into the CD ROM drive e Click Start Control Panel then click the Appearance and Themes icon a p Erter EE Pole naaa kap at rock nghe amr P ETH xz Bee aaa Phra raus anri ns LJ il Ssuthoendk E prem uS Pep Ede ere ur HWET 10 0 E gt Ft Pie is Fo CRETE ea Pagi PEER Caplorar KA Help and Support We j SI 2narch 7 Bun NIE Lr I Click Display icon and choose the Settings tab then click Advanced rr re EET LOE ire pour LAOS Em pr Ses porte Le br a O S D Eee T Theos Goskivg Seren deve Aa Seiras Tp ipe r rd ihera a Pick a task ILL Loo Has ENL LLLI LL LLL dada KAL a m Ll E Des Naka rem m o Dagdag or pick a Control Panel icon PANG pal Ka na st Sen del acer s r Crnku cast E E Lickin CF isses a By a aaa Del sms pes ad pole Lei ee Bu ce tie Click the Properties button on the Monitor tab and select Driver tab Plug and Play Monitor and 30 Prophet Ni Properties r3 Plug
35. fety Precautions B Introduction Connections Using the Software B Adjusting the Monitor a Troubleshooting B Specifications a Information O Connections Connecting Cables Using the Stand 3 Connecting Cables Rear of Computer Rear of Monitor QU ps LE 2 r Macintosh Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin D sub port on the back of your monitor RGB IN Using the DVI Digital connector on the video card Connect the DVI Cable to the DVI IN HDCP port on the back of your Monitor DVI IN HDCP Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub connection cable X Ifthe monitor and the computer are connected you can turn them on and use them Connecting Cables Using the Stand 3 Using the Stand Monitor Assembly Monitor and Bottom 3 Swivel stand d Using 5 vou can swivel the monitor left and right at an angle of 350 to set the monitor lengthwise The rubber under the stand is to avoid the monitor slide When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor the power cord of cable can be destroyed 3 Tilt angle 23 d Using You
36. ka yskocilova 4 14000 Praha 4 70 70 19 70 030 6227 515 3260 SAMSUNG 7267864 0 15 min 01805 121213 0 14 Min 06 80 SAMSUNG 7267864 800 SAMSUNG 7267864 0032 0 2 201 24 18 0900 20 200 88 0 10 Min 815 56 480 0 801 801 881 80 8 200 128 0818 717 100 0800 SAMSUNG 7267864 902 10 11 30 0771 400 200 0800 7267864 0870 SAMSUNG 7267864 800 7267 800 7267 8 800 77777 8 800 080 1188 8 800 200 0400 8 800 502 0000 140 1234 1300 362 603 800 810 5858 010 6475 1880 3698 4698 http www samsung com dk http www samsung conv fi http www samsung convfr http www samsung de http www samsung com hu http www samsung convit http www samsung lu http www samsung com nl http www samsung com no http www samsung com pl http www samsung com pt http www samsung com uk http www samsung com sk http www samsung com es http www samsung com se http www samsung com ch http www samsung com uk http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com ur http www samsung uz http www samsung com au http www samsung com cn http www samsung com hk INDIA 3030 8282 1800 1100 11 http www samsung com in INDONESIA 0800 112 8888 http www samsung com id JAPAN 0120 327 527 http www samsung com jp MALAYSIA 1800 88 9999 http www samsung com my PHILIPPINES 1800
37. more clear and vibrant image Mild If you select Mild you can view a more natural and soft image Color Innovation Normal If you select Normal you can watch the most Qa Q general standard screen wu Demo If you select Demo you can compare the current screen with the screen when the Color Innovation function is enabled Custom The pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the Picture and Color menu by using the OSD to fit your eyes MENU 4 gt 2 gt 2 gt Y gt MENU Adjusts individual Red Green Blue color balance Red Green Color Control Blue Q Q MENU 4 im x FOL TlH gt Y gt MENU Gamma correction changes the luminance of the colors with intermediate luminance Mode 1 Ems Mode 2 2Q Mode 3 MENU gt T gt 4 oa gt 4 5 A MENU O EI Image lk MENUS OO a FF do SORE AUTO j Lj ri Menu Description Play Stop Removes noise such as vertical stripes Coarse adjustment may move the screen image area You Coarse Fine Sharpness H Position V Position O OSD uk Menu Language H Position may relocate it to the center using the horizontal control menu MENU gt 4 gt L gt 2 4 Y gt MENU Removes noise such as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the frequen
38. n appears on your desktop Soe tO aS ED T Double click the icon to start the program maid MagicTune execution icon may not appear depending on specification Mure of computer system or monitor If that happens press F5 Key TITTLE TETETITTLLELITIIT Lice rit TUT TTTITITI TITI TI TTTITITITITITTIIITITITITITTTTITIITITTITTTTT Mine Installation Problems MagicTune The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment veine o0 System Requirements OS Windows 2000 Windows XP Home Edition Windows XP Professional Windows Vista HAHAA m It is recommended using MagicTune in Windows 2000 or later Hardware e 32MB Memory above e 60MB Hard disk space above For more information visit the MagicTune website Uninstall The MagicTune program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MagicTune 1 Go to Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add or Remove Programs icon in Control Panel 3 In the Add or Remove Programs screen scroll down to find MagicTune Click on it to highlight it 4 Click the Change Remove button to remove the program 5 Click Yes to begin the uninstall process
39. n even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs D Plug amp Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard VESA DDC for the Plug amp Play function G Resolution The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1680 X 1050 this means the screen is composed of 1680 horizontal dots horizontal resolution and 1050 vertical lines vertical resolution Contact SAMSUNG WORLDWIDE Terms For Better Display Authority 3 For Better Display Adjust computer resolution and screen injection rate refresh rate oncomputer as described below to enjoy the best quality of picture You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT LCD Resolution 1680 X 1050 Vertical frequency refresh rate 60 Hz TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above is used for this produc
40. only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Model SyncMaster 226CW The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement M Safety Precautions Introduction B Connections a Using the Software B Adjusting the Monitor a Troubleshooting a Specifications B Information O Introduction Features Package Contents Your Monitor 3 Features D RTA Monitor RTA Response Time Accelerator A function that accelerates the response speed of the panel so as to provide a sharper and
41. ontained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPMS and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty 2 What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid cryst
42. ount the monitor at least 10cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified Please use Wall Mount according to the International standards Model SyncMaster 226CW The color and appearance of the product may Yary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement M Safety Precautions Introduction Connections Using the Software B Adjusting the Monitor a Troubleshooting B Specifications a Information O Using the Software Monitor Diver Natural Color MagicTune ImageViewer 3 Monitor Driver When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China Installing the Monitor Driver Automatic Insert CD into the CD ROM drive Click Windows amp Choose your monitor model in the model list then click the OK
43. product unplugged Otherwise this may cause heat emission from the accumulated dirt or degraded insulation causing electric shock or fire Do not place your children s favorite toys or any other objects of interest on the product Children may try to climb on the product to retrieve an object The product could fall causing injury or even fatality When lifting up or moving the monitor do not lift the monitor upside down while holding only the stand This may cause your monitor to fall and become damaged or cause personal injury G Good Postures When Using the Monitor Try to maintain a good posture when using the monitor e Keep your back straight e Keep a distance of about 45 50 cm between your eyes and the monitor screen Look at the screen from slightly above it and have the monitor directly in front of you e Tilt the monitor upwards by 10 20 degrees Adjust the monitor height so that the top of the monitor is slightly below eye level e Adjust the monitor angle so that there is no reflected light on the screen Try to maintain your arms perpendicular to your armpits e Keep your arms level with the back of your hands e Keep the angle of the elbow perpendicular e Keep the angle of the knees at more than 90 degree Do not let your feet fall up from the floor Adjust the arm position so that it is below the heart Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe
44. t But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness For example the number of TFT LCD sub pixels that is contained in this product are 5 292 000 3 When cleaning the monitor and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it f you are not satisfied with the picture quality you can get better quality of picture by performing the auto adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the FINE COARSE adjustment function 3 f you view a fixed screen for an extended period of time residual image or blurriness may appear Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time Contact SAMSUNG WORLDWIDE Terms For Better Display Authority 3 Authority D Information in this document is subject to change without notice 2007 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors c
45. ting Connections a Using the Software B Specifications B Information Check List Q amp A Self Test Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Symptom No images on the screen cannot turn on the monitor Check List Is the power cord connected properly Can you see Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1680 X 1050 60 Hz on the screen There is no image on the screen Is the power Solutions Check the power cord connection and supply Connected using the D sub cable Check the signal cable connection Connected using the DVI cable If you still see an error message on the screen when the monitor is connected properly check to see if the monitor status is set to analog Press SOURCE button to have the monitor double check the input signal source If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes If the initial screen the login screen does not appear contact the Service Center or your
46. tion with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor Place your monitor in a location with low humidity and a minimum of dust Failure to do so may cause electric shock or fire inside the monitor Do not drop the monitor when moving it This may cause damage to the product or the person carrying it Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf Dropping the product may cause damage to the product or the person carrying it Do not place the product on the floor Take care as someone specifically children may trip over it Do not place the product on an unstable or small surface area Place the product on an even and stable surface as the product may fall and cause harm to someone walking by specifically children TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES Otherwise this may cause fire Keep any heating devices away from the power cable A melted coating may cause electric shock or fire 3 Do not install the product in places with poor ventilation for instance a bookshelf closet etc Any increase in the internal temperature may cause fire 3 Put down the monitor carefully
47. tog Ihis inatallatbon now and Contact the hardware vendor for software that has passed Windows Logo testing This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually ar deare Update Wizard Completing the Hardware Update Wizard The vated Fasz hri eid miang the ioiei ka a Samsung saan CE Frith lo Hope Ba waaa Plug and hay Monitor and AF Erophot IN froporiiocs ira Fat GaFose3 D Dudes E nasi Pacers EM Cole Conectien Genoa adapt Micros Torche Color hiara Fel orru nma um Vna aral Mare Pl ceo AGA lenge Botan ufa naka Fal bleus 1 Bitte sodes tet tiie orc Coreen caries Cia te us Peek kua ale gami M Ga rut ie eee p aka Thee aaa kaa de a aaah cee Add Cara ee Poe Monitor driver installation is completed DO Microsoft Windows 2000 Operating System iih Samsung PERRE mn Gene Carre ad Samsung s Dina Preis Ganid Diya Pabo TT 42001 Dina Yasay Taam Cebgetal Digne Mot igy warned Cro Dota xus To wies atah aces he dmo flow Ugdato Dum To upame the die lo this device aha daa kada after upang iho dra roll Holl Back Cire Gack bo iha pierce nababa chore To uniri add thee dra Dicere Chee J When you can see Digital Signature Not Fo
48. trol button 1 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or works involving heavy text 3 Internet For working with a mixture of images such as texts and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD Brightness button fi Adjust buttons Wy A o Enter button SOURCE button 7 Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast 2 Click here to see an animation clip When OSD is not on the screen push the button to adjust brightness 2 Click here to see an animation clip Not available in MagicBright mode of Dynamic Contrast Adjust items in the menu Activates a highlighted menu item Push the SOURCE then selects the video signal while the OSD is off When the SOURCE button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode analog or digital input signal f you select the digital mode you must connect your monitor to the graphic card s DVI IN HDCP port using the DVI
49. ug from the outlet during storms or lightning or if it is not used for a long period of time Failure to do so may cause electric shock or fire Do not try to move the monitor by pulling only the wire or the signal cable This may cause a breakdown electric shock or fire due to damage to the cable Do not move the monitor right or left by pulling only the wire or the signal cable This may cause a breakdown electric shock or fire due to damage to the cable Do not cover the vents on the monitor cabinet Bad ventilation may cause a breakdown or fire Do not place water containers chemical products or small metal objects on the monitor Xs D This may cause a malfunction electric shock or fire If a foreign substance enters the monitor unplug the power cord and contact the Service Center Keep the product away from combustible chemical sprays or inflammable substances This may cause an explosion or fire Never insert anything metallic into the monitor openings This may cause electric shock fire or injury Do not insert metal objects such as chopsticks wire and tools or inflammable objects such as paper or matches into the vent headphone port or AV ports or etc This may cause electric shock or fire If an alien substances or water enters the product turn the product off unplug the power connector from the wall outlet and contact the Service Center When viewing a fixed screen for an e
50. und on your monitor follow these steps Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Choose Monitor Casel If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button 9 Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button O Microsoft Windows Millennium Operating System als Click Start Setting Control Panel Double click the Display icon amp Select the Settings tab and click
51. uthorized changes to your computer This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 3 Click Update Driver in the Driver tab Ta wer Gut nin eco Fra driver fan Ta upinis tas giam piae Hor Dar daraga esee uarie vb nion mba mi Bi Pa a Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my CORP Hiner de yos Wait 9o search oes durer ONE hearth automatically tos upalabrd dieer s btane Wiryani md eem h EL LL LE dE El Baa pang res u pet ene pick bom a lit of Ars Sheer on my e Ten lind anii rema oe derrr ur aer nep ef Ver brin r aral al diver ntum r jhr aan bangong m Bo prend Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Select the device driver you want tia Intal lx tig ardvenre m DLE DIL IL P Pig c ur Bara i a Pan Diria Pei C IE Xp a hra epi lee Mil Hire Pe darin Select the model that matches your monitor from the list of monitor models on the screen and click Next Select the deor creer you ward To ball few dus hardere A Tima Fa mre quee e rem meer i pce RR LG Kahi Pul ad Po Pre ps m a OR 9 Click Close Close OK gt TN on the ead screens Ep in sequence Val
52. uting the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other requested hardware Monitor Driver Natural Color MagicTune ImageViewer 3 Natural Color 1 D Natural Color Software Program Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightit 2003 Samaang Electronica Ca Lid One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned
53. xtended period of time residual image or blurriness may appear Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time Adjust the resolution and frequency to the level appropriate for the model An inappropriate resolution may cause undesirable picture quality 22 inch Wide 55 cm 1680 X 1050 Viewing the monitor continuously at a too close angle may result in damage to your eyesight To ease eye strain take at least a five minute break after every hour of using the monitor Do not install the product on an unstable uneven surface or a location prone to vibrations 0 if Co O i Pa Th a a ha B alt a Ue D Dropping the product may cause damage to the product or the person carrying it Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire When moving the monitor turn off and unplug the power cord Make sure that all cables including the antenna cable and cables connected to other devices are disconnected before moving the monitor Failure to disconnect cables may damage it and cause fire or electric shock Place the product out of children s reach as they could damage by hanging onto it A falling product may cause injury to the person or even fatality When not using the product for an extended period of time keep the
54. your computer to remove the program completely Model SyncMaster 226CW The color and appearance of the product may Yary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement M Safety Precautions B Introduction Connections B Using the Software a Adjusting the Monitor a Troubleshooting B Specifications a Information O Adjusting the Monitor Control Buttons Direct Functions OSD Function 3 Control Buttons MENUS OO SYF 4 0 SOURCE AUTO o 8 6 O MENU U Opens the OSD menu Also use to exit the OSD menu or return to the previous menu F A These buttons allow you to adjust items in the menu Press this button to activate a highlighted menu item SOO AUTO When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Control Buttons Direct Functions OSD Function 3 Direct Functions AUTO MENUS O Ma YF AO SOURCE E AUTO Menu Description When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming Analog signal The values of fine coarse and position are adjusted automatically Available in Analog mode only AUTO To make the automatic adjustment function sharper execute the AUTO function while the AUTO PATTERN is on

Samsung 226CW User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents