Home

Samsung DVD-R4000 User Manual

image

Contents

1. eThis unit cannot record to discs containing both PAL and NTSC signals Play of discs recorded with both PAL and NTSC on another unit is not guaranteed RAM DVD R DVD V DEE Play only discs Discs you can play only and their logos DVD RAM DVD Video Video 1 5 CDs i T DVD R Audio MP3 Dise Logo Video system indication used CDs discs type in instructions For your reference e DVD R indicates DVD R that have not yet been finalized page 40 and can still be recorded on DVD DVD e DVD R that have been finalized can use the same features as Video lt PAL NTSC DVD V DVD Video Refer to features indicated DVD V 2 2 VIDEO Discs you can use for recording and play Logos for the discs you can record on and play Audio COMPACT Disc ve Regulation Indication used CD MISE type g g in instructions DIGITAL AUDIE 4 7 GB 9 4 GB Video DVD DVD 120m 5 RAM D SE PAL NTsC VCD RAM gt m RAM 2 8 GB 8 cm 3 CD 7 MP3 DVD 4 7 GB for R DVD General Ver 2 0 DVD R Region Management Information DVD Video only ar Region number are allocated to DVD players and software according to where they are sold The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or disc and accepts no responsibility and offers no compensation
2. gt to enter station name and press ENTER elf the station name needs a blank space select the blank between Z and gt Channel To enter newly available TV stations or change the channel number of an already tuned TV station Press the numeric buttons to enter the channel number of the desired TV station eWait a few moments until the desired TV station has been tuned e After the desired TV station is tuned press ENTER GI NICAM To select the type of sound to be recorded Use A Y to select Auto e Select Off if you want to record the normal mono sound during a stereo bilingual or NICAM broadcast or if the stereo sound is distorted due to inferior reception conditions Title Page To select the title extraction from TV guide of broadcaster Use A V to select the number between 100 and 899 ein case of a TV station with Teletext information the title of the TV programme is entered automatically provided the Title page is correctly set ein case of a TV station with Teletext information the name of the TV station is recorded automatically eThe unit s clock must be set correctly ein case of a TV station with Teletext information it may take over 30 minutes to get the title or may fail to get pages 37 42 5 Press RETURN E Changing the unit s settings continued Adding deleting and moving channels Use this function if eChannels were not set correctl
3. Menu and Play List button MENU PLAY LIST 20 45 ED Return button RETURN 0 0 0 0e eee eee 16 Manual skip button MANUAL SKIP 22 Time slip button TIME SLIP 0 30 Gp Recording mode button REC MODE 26 E Flexible recording button F Rec 27 EN Status display button STATUS 67 ED Input select button INPUT SELECT 36 Ed Erase button ERASE 00 00 ee 20 47 ED Audio button AUDIO 0 0 0 cece eee 23 B Frame advance and frame reverse buttons lt 1 H gt FRAME 21 EDIC button u ae 9 ED Display button DISPLAY 00008 51 Marker button MARKER 0 00005 24 Position memory button POSITION MEMORY 21 Main unit Page Ed Disc tray 0ooococcoc nenne 20 Disc tray open close button 4 OPEN CLOSE 20 D External link button EXT LINK 28 Standby indicator eWhen the unit is connected to the AC mains lead this indicator lights up in standby mode and goes out when the unit is turned on UBH AV3 input terminals AV3 ooo ooooooo 57 OD Display o0oooccoccon nennen 5 CD Time slip indicator TIME SLIP eWhile both recording and play are activated this indicator lights up OD Skip Slow Search buttons 44 44 P 21 Buttons such as 1 functio
4. 3 Red R REC MODE A CHANNEL V VIDEO IN LIMONO AUDIO IN R S VIDEO IN Y 4 S video cable not supplied 5 Audio Video cable not supplied 6 Other playback equipment e Connect to the video and audio output terminals Note If the audio output of the other equipment is monaural connect to L MONO Both left and right channels are recorded when connected through L MONO 57 Connecting external equipments continued When connecting to the input terminals on the rear of the unit Audio Video cable 1 1 2 2 3 3 1 Yellow VIDEO 2 White L 3 Red R Rear panel of this unit ho DIGITAL AUDIO OUT PCM BIT STREAM 4 oo el EE 4 Audio Video cable not supplied 5 S video cable not supplied 6 Other playback equipment eConnect to the video and audio output terminals Note If audio output of the other equipment is monaural use a stereo monaural conversion cable not supplied Changing the unit s settings Common pr ocedures Refer to the summary of settings table on page 59 and use the following procedure to change the settings if necessary Preparation eSwitch DVD TV to DVD 1 While stopped Press FUNCTIONS to show the FUNCTIONS window 2 Use A V lt gt ED to select SETUP and press
5. ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU ADVARSEL SYNLIG OG USYNLIG LASERSTR LING VED BNING UNDG UDS ETTELSE FOR STR LING VARO AVATTAESSA OLET ALTTIINA N KYM T N LASERS TEILYLLE L KATSO S TEESEEN VARNING SYNLIG OCH OSYNLIG LASERSTR LNING NAR DENNA DEL R PPNAD BETRAKTA EJ STR LEN ADVARSEL SYNLIG 0G USYNLIG LASERSTR LING NAR DEKSEL PNES UNNG EKSPONERING FOR STR LEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN ATA AA ARATE ER CREA ZIZHSCWHRUTTHOL H KDHET E hZBERATU MNKOLRUTSISKEN RQLS0233 Dear Customer May we take this opportunity to thank you for purchasing this Samsung DVD Video Recorder We would particularly advise that you carefully study the Operating Instructions before attempting to operate the unit and that you note the listed precautions Caution for AC Mains Lead For your safety please read the following text carefully This appliance is supplied with a moulded three pin mains plug for your safety and convenience A 5 ampere fuse is fitted in this plug Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amperes and it is approved by ASTA or BSI to BS 1362 Check for the ASTA mark or the BSI mark Y on the body of the fuse If the plug contains a removable fuse cover you must
6. Automatic The unit automatically switches resolution rates during recording according to the image The unit reduces block noise which occurs during MPEG compression by selecting the optimum rate Fixed The resolution rate is fixed to ensure the resolution rate is not reduced Still Mode HAZE Select the type of picture shown when you pause play Automatic Field Frame Field Less blurred field stills are shown Select if jittering occurs when Automatic is selected Frame Sharper frame stills are shown Select if small text or fine patterns cannot be seen clearly when Automatic is selected 60 Changing the unit s settings continued Sound Audio during Search AZAKA RAM DVD R DVD V Choose whether to have sound during search On Off Dynamic Range Compression WAREZ DVD V Dolby Digital only Change the dynamic range for late night viewing On Off Bilingual Audio Selection ABIA page 23 Select whether to record the main or secondary audio type when recording to DVD R M4 M2 Digital Audio Output AZIE Press ENTER to show the following settings To return to the previous screen press RETURN PCM Down Conversion page 62 On Off eSelect On when using a copyright protected disc since the audio output does not work Dolby Digital page 62 Choose whether to output Dolby Digital bitstream signals for decoding on other equipment or to convert
7. NA After setting Personal Planner programmes as required Sky Digital STB must be left on not set to DVD Recorder standby to ensure continuous output of RGB signals It is not possible to use the External Link 1 function of the DVD Recorder for timer recording of RGB signals from the Sky Digital STB 15 Auto Setup with Q Link Functions Ifyou do not have a Q Link TV ignore this page and go to page 17 The Preset Download function can automatically copy the tuning position of all available TV stations into the DVD Recorder s memory when you connect the DVD Recorder using a fully wired 21 pin Scart lead to a TV equipped with the Q Link function To Set Up this DVD Recorder with a brand new Q Link TV Perform the following operation steps exactly as described to ensure that the Preset Download function works correctly eFirst of all make sure that the DVD Recorder is switched off 5 gt 1 Switch the TV on The TV automatically starts to tune all available TV stations and to adjust the START 3 pe clock This is called Auto Setup function eWhen the TV has finished its own auto setup the DVD Recorder is automatically switched on and the downloading of the setup data from the TV to the DVD Recorder starts Download Pos 4 Download in progress please wait RETURN to abort b gt db Tenun Indication during downloading Switch DVD TV B to DVD When Download has finished the screen f
8. m ENTER Y RETURN 6 Press ENTER MT o stop partway through Select Cancel in step 6 and press ENTER ID Or Press RETURN For your reference eThe disc s available recording time may not increase after erasing short programmes e Computer data is not erased eThe available recording time on DVD R does not increase when you erase programmes 42 Using the DIRECT NAVIGATOR continued Entering and editing programme titles RAM DVD R Preparation eSwitch DVD TV Ep to DVD e Insert a disc you have recorded on After performing steps 1 to 3 of Erasing programmes perform the following steps 4 Use A V to select Enter Title and press ENTER 5 Enter or edit the title 1 2 3 4 5 6 7 8 9 0 Alles Tels Erre tai Elele Els e GERI E He e gt e Cels e Ill ele LIE IE JET ET I ENA EAE Ele IERIE IM Tel Te CIEE ele ee e Entering titles page 37 For your reference You can give DVD RAM titles of up to 64 characters and DVD R titles of up to 44 characters The full title is shown in the Properties screen but if you enter a long title only part of it is shown in the programme list Checking programme contents RAM DVD R You can check the contents of a selected programme Preparation eSwitch DVD TV B to DVD e Insert a disc you have recorded on After performin
9. DVD Video Recorder Operating Instructions Model No DVD R4000 COMPACT Before connecting operating or adjusting this product ist VIDE please read these instructions completely gt Alin n k Please keep this manual for future reference VIDEO DIGITAL VIDEO VIDEO RAM Web Site http www samsungdvd com EB RQT6996 B Contents Contents ani 2 Control reference guide cccoconcccccnnnnccnnannninnnncncnanencnnnnnnnnnanrn nn caos 4 A e O 4 Mallas sto eo 4 The units Slater ett c 5 Warning and Important InformatioN ooooccnnoncnnnnnnnnancnnnnanannnnns 6 Dear Customer zuunssusesnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnn 7 Checking the Accessories unsuussnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 7 Discs nein Discs YOU CAMUS Ec enter een Discs you can use for recording and play Le Play dISCS cata en einen Discs that cannot be played imita AUGIOTOFMALIOGOS ada en Types of disc for the type of connected TV 11 Connections with Scart leads uuussussuunnnnnnnnnnnannnnnnnnn 12 Connections without Scart leads usussessanssnnnnnennnnnnnn 13 Connections with S Video cable uzuursnn0ansnnnannennnnn 14 Recording from Set Top Boxes STB or other Satellite Receivers SAT 222er haha 15 Auto Setup with Q Link Functions usseessnnesnnnnnnnnnnnnnnnnnn 16 To Set Up this
10. Play Scenes Edit PL Copy PL Erase Enter Title Properties FLEXIBLE REC pre FLEXIBLE REC Flexible recording mode TOP MENU MENU TOP MENU Example Display a disc s menus RAM page 46 RAM RAM RAM RAM RAM RAM RAM RAM DVD R page 27 DVD V page 20 Some items will not be shown unless you release disc protection with DISC INFORMATION Disc Protection page 38 or release cartridge protection with the write protect tab page 72 Timer recording Using VIDEO Plus number to make timer recording VIDEO Plus are different trademarks used to represent the same easy recording feature However for simplicity only the term VIDEO Plus will be used RAM DVD R Remote control only You can easily programme the unit to make a timer recording of a programme by entering the programme s VIDEO Plus number which can be found in the television sections of newspapers or in television guides You can programme up to 16 programmes one month in advance Programmes for everyday or every week are counted as one programme Preparation eSwitch DVD TV to DVD eEnsure that this unit s clock is set correctly eInsert a disc for recording make sure there is enough room for the programme you are going to record plus a little extr
11. Press lt lt SLOW SEARCH or gt gt SLOW SEARCH 4 backward gt gt forward DVD RAM LR elf using the 44 4 or gt gt gt gt EE button on the unit keep pressing the button for 1 or more seconds eThere are 5 search speeds Each press increases the search speed e The search speed is maintained when you release the button ePress gt 4 to return to normal play eYou will hear sound at speed one only forward when playing DVD RAM DVD R DVD Video and Video CDs You can turn this sound off if you want to page 60 Sound Audio during Search eSound is not heard during chasing play and simultaneous recording and play Slow motion play RAM DVD R DVD V While paused Press 4 SLOW SEARCH or gt gt SLOW SEARCH 4 backward does not work with Video CDs gt gt forward elf using the 44 4 or gt gt gt gt B button on the unit keep pressing the button for 1 or more seconds eThere are 5 slow motion speeds Each press increases the slow motion speed e The slow motion speed is maintained when you release the button ePress gt 4 to return to normal play Frame by frame viewing RAM DVD R DVD V e Remote control only While paused Press Il FRAME or II FRAME E or 4 gt OM lt 11 or 4 backward does not work with Video CDs H gt or gt
12. and press ENTER Erase Scenes Erase this Scene Yes No The selected scene is erased from the play list MT o erase other scene Repeat steps 5 and 6 To stop partway Select No in step 6 and press ENTER EI Or Press RETURN EX For your reference The play list itself is erased if you erase all the scenes in it Copying PLAY LIST RAM Preparation eSwitch DVD TV to DVD e Insert a disc you created play lists on After performing steps 1 to 2 of Adding Scenes to PLAY LIST perform the following steps 3 Use A V ED to select PL Copy and press ENTER D 4 Use 4 EI to select Yes and press ENTER Copy PLAY LIST Copy this PLAY LIST Yes No SELECT m ENTER v 0 RETURN The copied play list appears at the bottom of the list MTo stop partway Select No in step 4 and press ENTER ID Or Press RETURN Erasing a PLAY LIST RAM Preparation eSwitch DVD TV to DVD e Insert a disc you created play lists on After performing steps 1 to 2 of Adding Scenes to PLAY LIST perform the following steps 3 Use A V to select PL Erase and press ENTER D 4 Use 4 EI to select Yes and press ENTER Erase PLAY LIST Erase this PLAY LIST Yes No SELECT m ENTER 0 RETURN The play list is erased MT o stop partway Select No in step 4
13. eTo switch TV automatically to the picture from the unit in playback mode connect the AV1 socket of this unit to the TV by a 21 pin cable eThis function does not work with some equipment Refer to the equipment s operating instructions eThe beginnings of recordings may not be recorded correctly in some cases eWhen AV2 Connection is set to Ext Link 2 this function does not work if the input signal is NTSC system eThe play picture or menu picture is not output from AV2 socket during Linked timer recording standby mode eSome televisions have separate terminals for RGB input and Q Link and this means you cannot view RGB signals and use Direct TV Recording at the same time Refer to your television s operating instructions and select the type best suited to your needs Playing while you are recording Playing from the beginning of the programme you are recording Chasing play RAM You can start play from the beginning of a programme while continuing to record it Preparation Switch DVD TV EBY to DVD While recording or timer recording Press gt ED Play starts from the beginning of the programme being recorded 1 1 For example while recording programme 2 sport 2 You want to watch the sports programme currently recording programme 2 3 Do the above operation press gt AB and 4 The same sports programme is recorded while you
14. 3 Connect the AV1 21 pin scart socket to TV scart socket optional f Easy Link is a registered trademark of Philips e This is necessary for Download from TV with Q Link function Megalogic is a registered trademark of Grundig elf you use Panasonic TV with RGB output capability and want to SMARTLINK is a registered trademark of Sony receive RGB signals connect this unit to the AV1 socket on the TV 2 TANE For details refer to your television s operating instructions or consult your dealer e Unlike in most commercially available 21 pin Scart cables all 21 pins of one plug on a fully wired 21 pin Scart cable are connected to the matching pins on the other end of the cable Reference elf the TV set is equipped with a 21 pin scart socket that features Y C signal separation set the AV1 Output to S Video see page 61 so that you can play back with high picture quality and use a fully wired 21 pin Scart lead not supplied to connect the DVD Recorder to the TV 4 Connect the AV2 21 pin scart socket to the DVD Recorder Scart Socket on your Satellite Receiver Digital Sat receiver If you are not connecting a Satellite Receiver skip this step See pages 15 56 This unit E 29335 Satellite Receiver Ko 12 Connections without Scart leads If you do not have any scart leads and your TV is not Q Link type you can connect your DVD Recorder to a TV and Satellit
15. Name House No Postcode Shipping Condition The all settings in the SETUP screen return to the factory settings except for the ratings settings Yes No evel and the password and owner ID Changing the unit s settings continued W Disc Dvb v Setting the language of disc menu audio and subtitles for playing the DVD Video eSome discs are designed to start in a certain language despite any changes you make here elfa language which is not recorded is selected or if languages are already fixed in disc the default language in the disc will play instead Soundtrack Choose the preferred audio language English French German Italian Spanish Original Other x Subtitle Choose the preferred subtitle language Automatic English French German Italian Spanish Other gt gt gt Menus Choose the preferred language for disc menus English French German Italian Spanish Other KK Original The original language of each disc will be selected Other gt xk This is language code setting Input a code number with the numeric buttons E See below language code list Automatic If the language selected for Soundtrack is not available subtitles of that language will automatically appear if available on that disc eSome discs are designed to start in a certain language despite any changes you make here Ratings page 62 You can limit pl
16. REC MODE amp to select the recording mode e Select XP SP LP or EP et is also possible to perform the flexible recording FR page 27 4 e g When you have selected XP 5 Press REC to start recording e The programme is recorded into the available space on the disc DVD RAM XI Fa P MTo pause recording Press H E Press again to restart recording To stop recording Press Ml 9 To select channels with the remote control Press the numeric buttons E Convenient features eChasing play playing from the beginning of the programme you are recording page 29 eSimultaneous recording and play watching a programme you recorded while recording another page 29 e Time Slip checking the images you are recording page 30 26 MRe inserting double sided discs Reverse You can get up to 12 hours recording when you use double sided discs and use the EP mode Recording modes and approximate recording times in hours DVD RAM sal DVD R Single sided Double side 4 7 GB 4 7 GB 9 4 GB XP High quality 1 SP Normal 2 i a LP Long play je a sl EP Extra long play 6 le e eFlexible recording FR calculates a recording rate that will enable the recording to fit in the remaining time on the disc MW To check the remaining time and the current mode during recording Press STATUS several times 1
17. UHF CH 21 68 UHF CH 21 68 75 ohm PAL colour signal 625 lines 50 fields NTSC colour signal 525 lines 60 fields MPEG2 Hybrid VBR AV1 AV2 21 pin AV3 AV4 pin jack 1 Vp p 75 ohm terminated AV2 21 pin AV3 AV4 S terminal 1 Vp p 75 ohm terminated AV2 21 pin 0 7 Vp p PAL 75 ohm terminated AV1 AV2 21 pin Video Out pin jack 1 Vp p 75 ohm terminated AV1 21 pin S Video Out S terminal 1 Vp p 75 ohm terminated AV1 21 pin 0 7 Vp p PAL 75 ohm terminated Dimensions W X H X D Mass Approx 430 79X 283 mm Approx 3 8 kg Operating Temperature 5 C 40 C Operating Humidity range LASER Specification 10 80 RH no condensation Class 1 LASER Product Wave Length Laser Power 775 815 nm 655 666 nm No hazardous radiation is emitted with the safety protection 76 Note ass and dimensions shown are approximate Specifications are subject to change without notice This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Index MA Audio A is doi 23 AU
18. You can see this during simultaneous recording and play but you are unable to perform operations Erase a programme page 42 Enter or edit a title page 42 Check a programme s contents page 42 Write protect a programme page 43 Erase part of aprogramme page 44 Divide a selected programme into two page 44 For your reference eThe list can show up to 99 programmes that you have recorded eWhen using DVD R Protection Partial Erase and Divide are not displayed in the submenu eThe contents of the list are recorded on the disc e RAM When the disc is protected pages 38 72 you can only access Properties Release the protection to access other items Erasing programmes RAM DVD R The programme is erased completely when you use this procedure and cannot be retrieved Check the programme carefully before erasing it to ensure it isn t one you want to keep Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on 1 Press DIRECT NAVIGATOR 2 Use A V to select the desired programme 3 Use gt so the submenu appears Erase Enter Title Properties Protection Partial Erase Divide 4 Use A V to select Erase and press ENTER D 5 Use lt p to select Erase Erase Programme Remaining Time 0 58 SP Corresponding PLAY LIST will also be erased Erase Cancel a SELECT
19. You can set your own programming conditions up to 16 programmes Preparation eSwitch DVD TV to DVD eEnsure that this unit s clock is set correctly e Insert a disc for recording make sure there is enough room for the programme you are going to record plus a little extra 1 Press PROG CHECK e The Timer Programme List screen appears TIMER RECORDING Remain 1 58 SP 1 19 00 16 7 TUE No Name Date Start Stop Mode PDC e 01 BBC1 16 7TUE 1 19 1 22 SP OFF OK New Timer Programme SELECT ID Press ENTER to store ENTER 7 RETURN new programme A line that is ready for programming is highlighted 2 Press ENTER eThe Timer Programme Correction screen appears TIMER m RECORDING neman sa a Name Date Start Stop Mode PDC Please set Channel No OFO SELECT A SID ENTER O RETURN 3 Use gt EI to move through the items and change the items with A V ED e The current settings are shown each time you press P DD eYou may use the numeric buttons to enter Name Date Start and Stop TIMER i Remain 1 58 SP RECORDING 1 19 00 16 7 TUE Name Date Start Stop Mode PDC BBC1 _16 7TUE r OFF e Name Programme Position TV Station Name e Date Current date the day before one month later Daily Sunday to Saturday Daily Monday to Saturday Daily Monday to Friday Weekly Sundays gt gt Weekly Sa
20. eA screen similar to the illustrated may appear when you stop play Press MM again and you can use this unit s tuner to watch television This screen is also shown when you are playing CDs HETo pause play Press H E Press again to restart playing With non cartridge discs 1 Insert label up With double sided discs load so the label for the side you want to play is facing up 2 Guide for 12 cm 5 disc 3 Guide for 8 cm 3 disc 20 When a menu screen appears on the television Dvp v EAN Operate menus with the following operations Actual operations depend on the disc Press the numeric buttons to select an item or move A V 4 gt Gp to select an item and press ENTER TI eYou can return to menus after you start play by pressing TOP MENU or MENU DVD Video or RETURN ED Video CD Note eThe disc continues to rotate while the menu is displayed even after you finish playing an item Press I when you finish to preserve the unit s motor and your television screen e Volume may be lower when playing DVD Video than when playing other discs or during television broadcasts If you turn the volume up on the television or amplifier ensure you reduce the volume again before playing other sources or returning to the television so that a sudden increase in output does not occur For your reference elf SQ appears on the television The operation is prohibited by the
21. forward eEach press shows the next or previous frame ePress gt GP to return to normal play Skipping RAM DVD R DVD V MP3 You can skip to the beginning of tracks page 70 and chapters page 70 and restart play from there On DVD RAM and DVD R you can skip to the start of a programme and start play from there The section between the point where recording is started and the point where it is stopped is called a programme During play or while paused Press 4 SKIP or gt gt SKIP O 4 backward gt gt forward Each press increases the number of skips For your reference e After skipping the unit returns to the previous state play or pause ePress gt to restart play if it was paused ePressing td or gt P while a DVD menu is being shown or while the playback control feature on Video CDs page 70 is working may take you to a menu screen eYou can also mark positions to skip to page 24 DVD V ma 2 1 2 3 As T o 4 1 a 1 lt lt M4 gt gt 1 Play position 2 Twice 3 Once 4 Chapter track DVD R Play position Marker Twice Once Three times The programme before Current programme The programme after ANOURWN Starting play from a selected programme title chapter or track RAM DVD R DVD V MP3 Remote control only Preparatio
22. to re edit and press ENTER ID 6 Use search function such as fast forward and slow motion to find the start point of the scene and press ENTER 7 Use search functions such as fast forward and slow motion to find the end point of the scene and press ENTER ID Scene No Back Start Next EX AA ah Start End P EEI 8 Use A V to select Exit and press ENTER To re edit another scene 1 Use A V GD after step 7 to select Next or Back and press ENTER until you find the scene you want to re edit 2 Repeat steps 5 7 to continue re editing other scenes Note eYou cannot specify an end point before a start point or a start point after an end point For your reference eYou can fast forward rewind pause and slow motion while playing scenes just as you can during normal play 49 Using PLAY LIST to edit programmes continued Erasing a Scene from a PLAY LIST RAM Preparation eSwitch DVD TV BY to DVD e Insert a disc you created play lists on After performing steps 1 to 3 of Adding Scenes to PLAY LIST perform the following steps 4 Use lt gt to select Erase and press ENTER D 5 Use A Y lt gt ET to select the scene you want to erase and press ENTER ID 6 Use lt 4 to select Yes
23. 5 Use 4 EI to select Start and press ENTER DD Format Disc All contents of this disc will be completely erased Start formatting the disc eFormatting starts The message Formatting is complete appears when formatting is finished All recordings are irretrievably erased when a disc is formatted Check the disc carefully before formatting to ensure it doesn t contain any programmes you want to keep MT o stop formatting Select No in step 4 or Cancel in step 5 and press ENTER Or Press RETURN Note e Do not turn the unit off or disconnect the AC mains lead while the message Formatting the disc is on the television This can render the disc unusable This can take up to 70 minutes You can cancel formatting if it takes more than 2 minutes by pressing RETURN p The disc must be reformatted if you do this eAll data on the disc is erased when it is formatted including recordings made with this unit Data written to the disc by a computer is also erased For your reference eThe disc cannot be formatted if the write protect tab is switched to PROTECT Release the protection to continue page 72 e Formatting cannot be performed on DVD R or CD R RW eThe message Unable to format appears when you try to format discs this unit cannot use elf you have used the direct navigator to protect a programme page 43 the message Contents on the disc have been protecte
24. 61 elf you connect an other equipment with RGB output capability to the AV2 socket on this unit the output signal of the equipment must be set to RGB when you have set AV2 Input to RGB PAL only Note RGB means separate Red Green Blue colour signals If you connect a TV equipped with RGB input capability to the AV1 socket on this unit and a decoder equipped with RGB output capability to the AV2 socket the TV can receive RGB signal input from the decoder via the unit 56 Connecting external equipments continued Connecting a satellite receiver or digital receiver 1 Satellite receiver not supplied 2 21 pin Scart socket 3 21 pin Scart cable not supplied Connect a 21 pin Scart cable not supplied to the AV2 21 pin Scart socket on the unit and to the 21 pin Scart socket on the satellite receiver Connect the satellite receiver s mains lead to an AC mains socket Set AV2 Connection to Ext Link 1 or Ext Link 2 page 61 elf you connect an other equipment with RGB output capability to the AV2 socket on this unit the output signal of the equipment must be set to RGB when you have set AV2 Input to RGB PAL only Connecting a video cassette recorder When connecting to the AV3 input terminals on the front of the unit Audio Video cable 1 2 2 3 3 1 Yellow VIDEO 2 White L
25. Displaying PEAV LIST a ee een 45 Creating PLAY LIST essen return 46 Playing PLAY LIST 47 Playing Scenes AT Adding Scenes to a PLAY LIST hk OVINGERSCENE ana anne een TorezeditaPLALIS TA SCO civic ratita Erasing a Scene from a PLAY LIST DE Copying PLAY LIST ne sn se acer Erasing a PAY LIST Eee ping Res Titling PEAY GEIS Teese seuss aes a A Checking PLAY LIST s contents s2eH0 nalen Using DISPLAY menus znssussnssnsnnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnunnnnnnnnn 51 COMMON POCA Sri A AE 51 DISC MENU dida ita lia ads eh es A ahalehsmeimbalknninen Picture menu ia Sound Ms Repeat pl viii ari ias Child Lock To activate the Child Lock 1 94 To cancel the Child Lock nn ee ae iiss 54 Connecting external equipment oooocccnnccccnoncccnnnancnonannnnnnnannnnnns 54 Enjoying more powerful sound eeennnnen 54 Connecting a digital amplifier or system component A 55 Connecting an analog amplifier or system component B 55 Connecting a DECO tii dai a 56 Connecting a satellite receiver or digital receiver 56 Connecting a video cassette recorder 57 Changing the unit s SettingS oooocconnncccnnncnnnnancnnnnnnannnnannncnnn COMMON POC Urraco dono othe te ates atest llas conan summaryol setliigsanneaeserk im Rn Entering a password Ratings Bigit lieulp t reason Glock Ssettings here dodne Ghannel Seltingsi reset teen dee Changing theO
26. ENTER ID 2 8 1 Menus The SETUP menu is made up of seven menus Tuning Settings Disc Picture Sound Display and Connection Select the menu s tab to display the items 2 Items A list of items in the menu you selected 3 Options This shows the current settings The options are shown when you select an item 3 Use A V ED to select the menu s tab and press 4 or gt TIP 4 Use A V EI to select the item you want to change and press ENTER ED 5 Use A V ED to select the option and press ENTER EI eSome options require different operations Follow the on screen instructions and the instructions described To return to the previous screen Press RETURN E33 Even if you have changed an option the change is not accepted unless you press ENTER ID MWhen you are finished Press FUNCTIONS ID For your reference eThe unit retains these settings in its memory until you change them even if you turn it off 58 Summary of settings This description shows the initial settings for this unit See page 58 for details on menu operation eUnderlined items are the factory presets Wi Tuning Manual Auto Setup Restart Download Wi Settings Remote This function is not available in this unit Don t change the Remote setting Clock Manual Clock Setting page 63 You can adjust the clock Auto Clock Setting page 63 The unit adjusts the clock automatically Owner ID PIN number
27. Gujarati 7185 Lingala 7678 Lithuanian 7684 Romanian 8279 Telugu 8469 acedonian 7775 Russian 8285 Thai 8472 alagasy 7771 Samoan 8377 Tibetan 6679 alay 7783 Sanskrit 8365 Tigrinya 8473 alayalam 7776 Scots Gaelic 7168 Tonga 8479 altese 7784 Serbian 8382 Turkish 8482 aori 7773 Serbo Croatian 8372 Turkmen 8475 arathi 7782 Shona 8378 Twi 8487 oldavian 7779 Sindhi 8368 Ukrainian 8575 ongolian 7778 Singhalese 8373 Urdu 8582 auru 7865 Slovak 8375 Uzbek 8590 epali 7869 Slovenian 8376 Vietnamese 8673 orwegian 7879 Somali 8379 Volap k 8679 Oriya 7982 Spanish 6983 Welsh 6789 Pashto Pushto 8083 Sundanese 8385 Wolof 8779 Persian 7065 Swahili 8387 Xhosa 8872 Polish 8076 Swedish 8386 Yiddish 7473 Portuguese 8084 Tagalog 8476 Yoruba 8979 Punjabi 8065 Tajik 8471 Zulu 9085 Quechua 8185 Tamil 8465 Rhaeto Romance 8277 Tatar 8484 59 e Underlined items are the factory presets M Picture Rec Resolution AEA Select the picture sharpness when recording Fine Normal Fine Pictures become clear and vivid Normally use this setting Normal Select it when recording noisy pictures e Fine is automatically selected if you set TV System to NTSC Hybrid VBR Resolution ABA Switch between automatic and fixed hybrid VBR resolution when recording Automatic Fixed
28. Input to RGB PAL only page 61 Flexible recording mode FR The unit calculates a recording rate that enables the recording to fit in the time you set within the remaining time on the disc and with the best possible picture quality 1 While stopped Press F Rec Gp FLEXIBLE RECORDING Recording in FR mode Maximum rec time 1 Hour 23 Min 1 Hour 23 Min SELECT a dm ENTER e RETURN Press A V 4 gt to set the recording time To start recording Press A Y lt gt to select Start and press ENTER eRecording starts O N For your reference Press STATUS during recording to show the remaining time et is not possible to change channel or recording mode while flexible recording is paused eRecording time reduces if you repeatedly pause recording 27 Recording television programmes continued One Touch Recording Specify a time to stop recording RAM DVD R Main unit only This is a simple way of making timer recordings when you are in a hurry or before you go to bed You can set the time up to 4 hours in advance While recording Press REC on the main unit to select the recording time The time increases as illustrated each time you press the button The counter decreases in 1 minute units after you set a time You can change the time again with the same operation When the time you set is reached recording stops and the un
29. Observe the following points to ensure continued listening and viewing pleasure Disc handling Do not use irregularly shaped discs such as heart shaped unit These can damage the WB How to hold a disc Do not touch the recorded surface Wif there is dirt or condensation on the disc If the disc is dirty wipe with a damp cloth and then wipe dry Moisture may condense DVD RAM and DVD R eClean and dry with the on discs after they are brought inside from the cold DVD RAM PD disc cleaner Do not use cleaners or clothes for CDs to clean DVD RAM and DVD R eNever use cloths or cleaners for CDs etc DVD Video Video CD and CD Wipe it with a damp cloth and then wipe dry MHandling precautions Do not attach labels or Humid or dusty locatio Do not write on the label side with a ball point pen or other writing instrument Do not use record cleaning sprays benzine thinner static electricity prevention liquids or any other solvent stickers to discs Do not use discs with exposed adhesive from tape or left over peeled off stickers Do not use scratch proof protectors or covers Do not use discs printed with label printers available on the market Do not use discs that are badly warped or cracked Do not place or store discs in the following places Locations exposed to direct sunlight ns Locations directly exposed to a heat vent or heating appliance 68 Glossary Bitstream T
30. The television programme was copy guarded so the programme failed to record The programme failed to record for some other reason Disc space OK Displayed if the recording can fit in the remaining space on the disc However when the programme becomes longer than scheduled during the recording by setting PDC to ON the programme may not be recorded until its end gt Date For recordings made daily or weekly the display will show until when recordings can be made based on the time remaining on the disc I Displayed if the disc is not inserted in the unit or is write protected pages 38 72 or there is not enough memory capacity left on the disc To change the programme page 34 HETo exit from the Timer Programme List screen Press PROG CHECK or RETURN p The television is shown For your reference eProgrammes that failed to record are deleted from the list at 4 a m the day after tomorrow Timer recording continued Starting and canceling programmes RAM DVD R MT o put the unit on recording standby Press O TIMER B The unit turns off and lights on the unit s display Note eThe unit cannot go to timer recording standby if the disc is protected pages 38 72 or full flashes Check the disc carefully MT o release the unit from recording standby If you want to record something else before the programme start time for example Press TIME
31. Total Scene Title 2 01 Me 0 03 006 Auto action 02 416 71 0 07 006 USJ Bi 004 Di To stop PLAY LIST play Press E 9 The play list appears For your reference You can also select play lists from the list in step 2 by entering a 2 digit number with the numeric buttons E If you enter a number larger than the total number of play lists the last play list is selected 47 Using PLAY LIST to edit programmes continued Playing Scenes RAM Preparation eSwitch DVD TV BY to DVD eInsert a disc you created play lists on 1 Press PLAY LIST E 2 Use A V to select the play list that contains the scene you want to play and use gt TD Play Scenes Edit PL Copy PL Erase Enter Title Properties 3 Use A V to select Play Scenes and press ENTER 001 001 4 Use A V lt gt GT to select the scene you want to play and press ENTER ID eThe scene you select is played MT o stop scene play Press ml The scene list appears MI To show scene 10 and later In step 4 use A V gt EI to select Next and press ENTER DD For your reference eYou can also select a page of scenes in step 4 by entering a 3 digit number with the numeric buttons To erase a PLAY LIST or a PLAY LIST Scene during play 1 During play a play list or a play list scene Press ERASE EN eA confirmation mess
32. and press ENTER ID Or Press RETURN 50 Using PLAY LIST to edit programmes continued Titling PLAY LIST RAM Preparation eSwitch DVD TV Ep to DVD e Insert a disc you created play lists on After performing steps 1 to 2 of Adding Scenes to PLAY LIST perform the following steps 3 Use A V ED to select Enter Title and press ENTER D Enter Title k c F L o R v Y LEH el el Ei ee Hee EHHE lel e LIEIL eleele JB 4 3 o El 6 n jkk m in e a lu wi x 216 1 2 3 4 5 6 Y 8 9 0 E 4 Enter the title e Entering titles page 37 For your reference You can give play lists on DVD RAM titles of up to 64 characters The full title is shown in the Properties screen but if you enter a ong title only part of it is shown in the play list screen Checking PLAY LIST s contents RAM Preparation e Switch DVD TV to DVD e Insert a disc you created play lists on After performing steps 1 to 2 of Adding Scenes to PLAY LIST perform the following steps 3 Use A V to select Properties and press ENTER D Properties Dinosaur No 3 Date 26 7 2002 FRI Scenes 004 Total 0 05 51 0D ENTERZ gt 0 RETURN Using DISPLAY menus RAM DVD R DVD V MP3 Remote control only DISPLAY menus contain information about the disc
33. and then ENTER ED To correct a character 1 Use A Y lt gt EI to select the character you want to correct in the title field 2 Press IN You can also erase characters by using A Y 4 gt to select ERASE and pressing ENTER 3 Use A Y lt gt EI to select the correct character and press ENTER Note eYou cannot enter titles if the programme is protected Release the protection with the direct navigator page 43 eYou cannot enter titles unless the Disc Protection in DISC INFORMATION is Off page 38 eYou cannot enter titles if the disc is protected with the write protect tab page 72 elf you enter a long title only part of it is shown in the programme list page 41 and play list screen page 45 37 DISC INFORMATION About DISC INFORMATION RAM DVD R eYou can give discs titles Enter Title eYou can write protect and write enable DVD RAM Disc Protection eYou can erase all programmes and play lists on DVD RAM Erase all programmes eYou can format DVD RAM Format eYou can finalize DVD R so they can be played on compatible DVD players Finalize Enter Title RAM DVD R Each disc can be given a different title Preparation e Switch DVD TV to DVD e Insert a disc you have recorded on 1 While stopped Press FUNCTIONS ID 2 Use A Y lt gt EI to select DISC INFORMATION an
34. can render the disc unusable eYou can only finalize DVD R that were recorded on this unit eYou cannot record on DVD R that have been finalized eProgrammes longer than 5 minutes will be divided into about 5 minute chapters eThe markers you entered page 24 will be lost eFinalizing takes up to about 15 minutes 40 DISC INFORMATION continued Using the DIRECT NAVIGATOR Selecting programmes to play RAM DVD R A list of programmes is created as you record them You can use his list to find the programmes you want to watch Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on 1 Press DIRECT NAVIGATOR eThe programme list appears eThe images for the currently highlighted list are played in the background DIRECT TA E No Name Date Time of BBCi 24 7WED 10 00 Dinosaur BB 02 BBC 24 7 WED 9 00 Auto action E 03 BBC 2477 WED 14 00 USJ 2 Use A V to select the programme you want to watch and press ENTER E I Date Time LJ BRCM 247 WED 0 00 Dinosaur For example when you select 02 BBC 247WED 9 00 Auto action programme number 2 E 03 BROT 247 WED 4 01 USJ E a I TOTAL 3 No O O enren ernetu SELECTA e Play of the images that were playing in the background continues MT o clear the programme list Press DIRECT NAVIGATOR or RETURN E For your reference eThe direct navigator works while stopped playing or rec
35. deleted dummy timer recordings for each of the satellite stations that you will make VIDEO Plus recordings from 9 Press RETURN p when you have finished Selecting TV screen type The aspect ratio is factory set to 4 3 for a regular television You do not have to change this setting if you have a regular 4 3 aspect television Preparation eTurn on the television and select the appropriate video input to suit the connections to this unit eSwitch DVD TV to DVD 1 Press DVD to turn this unit on 2 Press FUNCTIONS to show the FUNCTIONS window 3 Use A V lt gt EI to select SETUP and press ENTER DVD RAM FUNCTIONS Disc Protection Off Cartridge Protection Off P J DISC INFORMATION DIRECT NAVIGATOR CREATI ESPEAYIENGT pps IG PLAY PLAY LIST SELECT enter a pe pP o RETURN TOP PLAY FLEXIBLE REC 4 Use A V ED to select the Connection and press 4 or gt EI 5 Use A V ED to select TV Aspect and press ENTER ED sep ss Jorm 4 eS PAL Tuning Normal 4 3 TV Settings orm 43 TV Settings DVD Video UT SET Disc orm 3 TV Setings DVD RAM CTCE Picture AV1 AV2 Settings Sound Display mn se 4 5 OB Connection SU RETURN 6 Use A V EI to select the TV aspect and press ENTER ED SETUP TV Aspect Tuning Settings _ Disc Picture Sound Display Connection e 4 3 factory setting e16 9 MT o return to
36. e Change the settings in the SETUP menu as follows page 61 AV2 Input set to Video AV2 Connection set to Ext Link 1 AV1 Output set to RGB or S Video or Video to suit the AV terminal of your TV eSet up Personal Planner programmes as required ePress EXT LINK amp on the DVD Recorder NA External Link1 function can only be used with the Sky Personal Planner function for timer recording of DVD Recorder video signal from the VCR Scart terminal of the Sky Digital Set Top Box BR Wi Recording RGB Signals Most Satellite Receivers are capable of outputting RGB signals for viewing on television through a Scart terminal called TV Scart on a Sky Digital STB In the case of a Sky Digital STB recording of RGB signals from the TV Scart terminals is possible but the Personal Planner function for timer recording cannot be used in conjunction with the External Link1 function of this DVD Recorder To record programmes by RGB signals eMake connections as shown eSet your Sky Digital STB to output RGB signals e Change the settings in the SETUP menu as follows page 61 AV2 Input set to RGB AV2 Connection set to NORMAL AV1 Output set to RGB or S Video or Video to suit the AV terminal of your TV eSet up Personal Planner programmes as required eFollow the steps for setting up timer programming
37. gt Title lt gt OFF tS TrackoAll OFF Te Track lt gt Group lt gt OFF y While playing a play list RAM PL PLAY LIST lt gt OFF Pie De If the Video CD has playback control 1 While stopped the screen saver is on the television press the numeric buttons to select a track 2 Do the above operation Note e Repeat play may not work as desired with some discs e Repeat play does not work if the disc s elapsed play time is not shown on the unit s display eYou cannot use repeat play to repeat an entire DVD Video e ERASE EN does not work while in repeat play mode 53 Using DISPLAY menus continued Child Lock The Child Lock deactivates all buttons on the unit and remote control Use it to prevent other people from operating the unit Remote control only To activate the Child Lock Hold down ENTER and RETURN p simultaneously until X HOLD appears on the unit s display elf you press a button while the Child Lock is on X HOLD appears on the unit s display and operation is impossible To cancel the Child Lock Hold down ENTER and RETURN p simultaneously until X HOLD disappears elf you cannot cancel the Child Lock press RETURN and then perform the operation Connecting external equipment First of all please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting cable
38. it was in before you called up the play list To specify another scene Select Next after step 4 and press ENTER IB then repeat steps 3 and 4 46 For your reference eYou can fast forward rewind pause and slow motion while playing scenes just as you can during normal play eOne disc can have a maximum of 99 play lists and 999 scenes These numbers may be reduced under some conditions eYou cannot specify an end point before a start point or a start point after an end point elf you specify an end point but not a start point the unit determines the beginning of the programme as the start point Similarly if you specify a start point but not an end point the unit determines the end of the programme as the end point eYou may not be able to specify start and end points if the material is still pictures recorded on other equipment eThe unit pauses play when the end of the last programme on the disc is reached during this procedure eYou can also display the CREATE PLAY LIST screen by selecting at the bottom of the play list Playing PLAY LIST RAM Preparation eSwitch DVD TV to DVD e Insert a disc you created play lists on 1 Press PLAY LIST E 2 Use A V ED to select the play list you want to play and press ENTER ID eThe play list you select is played e You can display the play lists after the sixth one by moving 16m No Date
39. new programme a Am CANCEL ENTER RETURN No OFO Timer Programme Correction screen from step 3 on page 32 1 Use lt gt to select the item you want to change 2 Change the setting with A Y ID eYou may use the numeric buttons to enter Name Date Start and Stop The items change as follows e Name Programme Position TV Station Name e Date Current date the day before one month later Daily Sunday to Saturday Daily Monday to Saturday gt Daily Monday to Friday Weekly Sundays Weekly Saturdays e Start start time Stop finish time The time increases or decreases in 30 minute increments if you hold the button e Mode Recording mode XP SP LP EP FR page 26 ePDC ON gt 0FF The PDC signals cannot be detected in Auto Setup because the station does not transmit the PDC signals OFF elf indicated the station may not temporarily transmit the PDC signals It is recommended to attempt to carry out Auto Setup again in several hours in several days etc page 65 If still appears after several attempts the station possibly does not transmit the PDC signals e Title Select Title and press ENTER EI then refer to page 37 for entering title 3 Press ENTER when you have finished making changes The Timer Programme List screen appears MSetting for control of the rec
40. performed and what condition the unit is in Remote control only Preparation eSwitch DVD TV to DVD Press STATUS to change the information displayed The display changes each time you press the button For example DVD RAM DVD RAM REC PLAY LR 0 07 21 6 8 m Remain 0 50 XP m PRG2 0 05 14 XP m PRG1 0 00 10 SP A DVD RAM REC PLAY LR Bit Rate O REC 5 4Mbps Xo i DO mPLAY 3 1Mbps SP EE y No display DVD RAM REC PLAY LR 67 Display examples 1 Current media 2 Current recording or play status input channel eShows the current state of the unit and the input channel REC Recording PAUSE Recording paused PLAY Playing Hl Playing Paused gt Fast forwarding 5 speeds lt 4 Rewinding 5 speeds b gt Slow motion 5 speeds at Reverse slow motion 5 speeds 3 Audio type e Automatic indication of the type of sound system which the programme being watched NICAM MONO is broadcast 4 Sound mode LR L R when you have changed the audio with the remote control s AUDIO 0 07 21 6 8 m Remain 0 50 XP m PRG2 0 05 14 XP m PRG1 0 00 10 SP A 5 Available recording time and recording mode e g 0 50 XP indicates 50 minutes in XP mode 6 The current date and time 7 Recording time eShows recording time recording mode and a rough guide to how much space has been used for recording on the disc 8 Elapsed play time 9 Play p
41. programming a VIDEO Plus timer recording Auto Setup Restart Download You can use the SETUP menus to start Auto Channel setting if Auto Setup page 17 fails for some reason Preparation eSwitch DVD TV to DVD ePress FUNCTIONS to show the FUNCTIONS window 1 Use A V lt gt UD to select SETUP and press ENTER ED eThe SETUP screen appears 2 Use A V to select the Tuning tab and press lt or gt ED SETUP See Manual se Auto Setup Restart 3 Use A V to select Auto Setup Restart or Download 4 Press ENTER ED prepare for Auto Setup start or Download start ePress ENTER again to actually start the Auto Setup or the Download 5 A message appears asking you to confirm the operation eActual screens depend on the operation Follow the on screen instructions 65 Changing the Owner ID You can change the PIN number Name House No and Postcode Preparation e Switch DVD TV to DVD ePress FUNCTIONS to show the FUNCTIONS window 1 Use A V lt gt to select SETUP and press ENTER D e The SETUP screen appears 2 Use A V ED to select the Settings tab and press 4 or gt 3 Use A V ED to select Owner ID and press ENTER D 4 Use gt and then use the numeric buttons or A Y lt gt ED to enter the current PIN number e After entering the correct PIN number
42. recorded on After performing steps 1 to 3 of Erasing programmes perform the following steps 4 Use A V to select Divide and press ENTER D 5 Use search functions such as fast forward and slow motion to find the point you want to divide and press ENTER qe y Preview Exit 0 00 05 HE Divide dl 0 00 05 6 Use A V to select Exit and press ENTER aa 7 Use 4 to select Divide and press ENTER eThe programme is divided at the point Divide Programme Once divided this programme cannot be re combined _ Cancel a SELECT IIS ENTER 0 RETURN MW To stop partway through Select Cancel in step 7 and press ENTER ID Or Press RETURN E To change the point to divide Select Divide in step 6 then repeat steps 5 7 To check the division point By selecting Preview in step 6 and pressing ENTER play will begin from a point 10 seconds prior to the division point You may wish to make sure that the division point is at an appropriate location Note eThe divided programmes retain the title of the original programme eA minute portion of the recording directly preceding the division point may be lost For your reference eUse search and slow motion to find the points et is not possible to carry out Divide in the following cases When the resulting part s
43. signals to discs containing NTSC signals or vice versa 10 eFor the United Kingdom 2 DVD Video can be played on this unit if their region number is the same or includes the same number or if the DVD is marked ALL Confirm the region number for this unit before choosing discs The number for this unit is indicated on the rear panel of the unit Playing CD R and CD RW This unit can play CD DA digital audio MP3 and Video CD format audio CD R and CD RW that have been finalized upon completion of recording lt may not be able to play some CD R or CD RW due to the condition of the recording AED Note eThe producer of the material can control how these discs are played This means that you may not be able to control play of a disc with some operations described in these operating instructions Read the disc s instructions carefully Discs that cannot be played eDVD Video with a region number other than the number for this unit or All eSome DVD R e DVD RAM 2 6 GB 5 2 GB eDVD ROM eDVD RW eDVD Audio e RW eCD ROM eCDV eCD G eCVD eSVCD eSACD e MV Disc ePD ePhoto CD eDivx Video Disc etc ePlay of non standard Video CDs and Super Video CDs is not guaranteed DVD R You can play DVD R on compatible DVD players by finalizing the process that allows recordings on DVD R to be played on compatible DVD players page 40 them on this unit effectively making them into DVD Video B
44. than one code repeat the procedure until you find the code that allows correct operation e Repeat this procedure after you change the batteries elf your television brand is not listed or if the code listed for your television does not allow control of your television this remote is not compatible with your television List of TVs Compatible with the unit s Remote Control Brand Code SAMSUNG 31 32 43 AIWA 35 AKAI 27 30 BLAUPUNKT 09 BRANDT 10 15 BUSH 05 06 CURTIS 31 DESMET 05 31 33 DUAL 05 06 ELEMIS 31 FERGUSON 10 GOLDSTAR LG 31 GOODMANS 05 06 31 GRUNDIG 09 HITACHI 22 23 31 40 41 42 INNO HIT 34 IRRADIO 30 ITT 25 JVC 17 39 LOEWE 07 ETZ 28 31 ITSUBISHI 06 19 20 IVAR 24 EC 36 OKIA 25 26 27 ORDMENDE 10 ORION 37 PANASONIC 01 02 03 04 44 PHILIPS 05 06 PHONOLA 31 33 PIONEER 38 PYE 05 06 RADIOLA 05 06 SABA 10 SALORA 26 SANSUI 05 31 33 SANYO 21 SBR 06 SCHNEIDER 05 06 29 30 31 SELECO 06 25 SHARP 18 SIEMENS 09 SINUDYNE 05 06 33 SONY 08 TELEFUNKEN 10 11 12 13 14 THOMSON 10 15 TOSHIBA 16 WHITE WESTINGHOUSE 05 06 Operation On and off Video input mode Channels Volume Numeric The remote control continued Button TV 0D AV A v CH B VOLUME 0 9 Discs Discs you can use The features you can use with the different types of discs are indicated as follows
45. the previous screen Press RETURN For your reference Apart from TV Aspect other settings also affect how video appears on your television Check the following if video doesn t appear correctly on your television Connection Norm 4 3 TV Settings DVD RAM or Norm 4 3 TV Settings DVD Video page 61 eThe video setting on the disc How video appears is often specified by the disc itself eThe video settings on your television 19 Playing discs RAM DVD R DVD V ma Preparation Switch DVD TV BY to DVD 1 Press DVD to turn the unit on 2 Press 4 OPEN CLOSE to open the tray and insert a disc e g DVD RAM 1 Arrow pointing inwards 2 Align correctly e Insert label up with the arrow facing in With double sided discs load so the label for the side you want to play is facing up e Insert inside the tray s guides e Insert one disc only 3 Press gt ED eThe disc tray closes and play begins The unit takes some time to read the disc before play starts elf the Resume function page 21 is not active playback will begin from the most recently recorded programme elf you insert a DVD RAM with the write protect tab set to PROTECT page 72 and press 4 OPEN CLOSE play starts automatically a s en HETo stop play Press Ml page 21 Starting play from where you stopped it
46. type How the type changes depends on when you press the button While receiving a TV programme with NICAM Automatic indication of the type of sound system which the programme being watched NICAM MONO is broadcast DVD RAM el 1 e g NICAM is selected elf NICAM OFF is selected during manual tuning MONO is always displayed While playing a television programme recorded on DVD RAM If it is a recording of a stereo broadcast LR gt L gt R Eod DVD RAM PLAY 2 SL 2 e g LR is selected While playing a DVD Video You can change the audio channel number each time you press the button This allows you to change things like the soundtrack language Soundtrack SE MOO Digital 3 2 1ch 8 Soundtrack EJ2 FRA MOO Digital 3 2 1ch 4 3 e g English is the selected language 4 The language is switched to French While playing a Video CD LR gt L R e el V CD PLAY 5 DL 5 e g LR is selected For your reference eYou can also use the DISPLAY menu to change the audio type eYou can change the audio for the images being played with simultaneous recording and play and Time Slip 23 Playing discs continued MWhen you have connected the unit to other equipment with an optical digital cable You cannot change the audio type when you have used only an optical digital cable for connection in the following cases eWhile playing s
47. type of disc being used Disc display 1 2 3 DVD RAM Disc Protection Off Cartridge Protection Off e u eS DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST FUNCTIONS PLAY LIST 4 te e de TIMER RECORDING PLAY E pre SETUP TOP PLAY FLEXIBLE REC 1 Disc title eThe disc s title is displayed if one is recorded You can enter titles with Enter Title in DISC INFORMATION page 37 2 Disc protection e On is displayed if you have used Disc Protection in DISC INFORMATION to protect the disc page 38 3 Cartridge Protection e On is displayed if the cartridge s write protect tab is switched to PROTECT page 72 Using the FUNCTIONS window RAM DVD R DVD V gt KA LA Preparation Switch DVD TV to DVD 1 While stopped Press FUNCTIONS to show the FUNCTIONS window BUD RAM uon on isc Protection pencon Cartridge Protection Off INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST e q TIMER RECORDING ar pe RETURN SETUP pe TOP PLAY FLEXIBLE REC 2 Use A Y lt gt EI to select an item e Refer to the relevant pages for details 3 Press ENTER eYour selection is entered and the FUNCTIONS window disappears If the operation requires further selections another screen appears To clear the FUNCTIONS window Press FUNCTIONS or RETURN 6 HB FUNCTIONS window icons DISC INFORMATION Enter Title
48. 0 50 XP 0 07 21 6 8 m Remain m PRG2 0 05 14 XP m PRG1 0 00 10 SP A 1 Available recording time and recording mode e g 0 50 XP indicates 50 minutes in XP mode Note e The message Cannot record Maximum amount of scenes exceeded is displayed if you try to start recording when there are already 99 programmes on a disc Erase unneeded programmes DVD RAM DVD R or use a new disc to continue recording eCheck that disc can be recorded on page 10 eEnsure the write protect tab is not set to PROTECT page 72 eEnsure the disc is not write protected with DISC INFORMATION page 38 For your reference eYou can record up to 99 programmes on one disc eYou cannot change the channel or recording mode during recording You can change them while recording is paused but the material is recorded as a separate programme eAn error message appears if you try to start recording when a disc is full the remaining time will be shown as 0 00 To continue recording erase unneeded programmes DVD RAM only page 42 Erasing programmes or use another disc eThere are limitations when recording to DVD R page 11 eThe message Can not record on the disc is displayed when recording was not completed correctly Check the discs for dirt or scratches eRecording cannot be performed correctly if you try to record PAL system to a disc that already contains recordings using NTSC e n RGB recording set AV2
49. 1 My favorite 001 Brazillian pops 002 Chinese pops 003 Czech pops elf the group has no ae track is 001 Momoko displayed as group M number The folder which the file of MP3 is not in through is indicated by black Even if that folder is chosen a file list doesn t come out 2 Press A V to select a group and press ENTER EP e The file list for the group appears For your reference ePress lt gt to jump layers in the tree screen To return to the file list Press RETURN EX Recording television programmes RAM DVD R Preparation Switch DVD TV BY to DVD 1 Press DVD to turn the unit on 2 Press 4 OPEN CLOSE to open the tray and insert a disc e Insert one disc only within the tray s guides e Use a disc that can be recorded on and that has enough space available ePress 4 OPEN CLOSE to close the tray eWhen using a DVD RAM for the first time with this unit format it to ensure accurate recording page 39 Format Check the disc carefully to ensure it doesn t contain programmes you want to keep 1 Arrow pointing inwards 2 Align correctly e Insert label up with the arrow facing in with double sided discs load so the label for the side you want to record is facing up 3 Press A v CH EP to select the channel 8 ry DVD RAM sp Lad 7 Al N ms DA ER S 3 e g When you have selected channel 4 4 Press
50. AM DVD R DVD V VCD Picture MODE To select the picture mode during play Normal Normal mode Soft Soft mode Fine Fine mode Cinema Cinema mode mellows movie enhances detail in dark scenes DNR You can turn on and off the DNR ON lt OFF 52 Using DISPLAY menus continued Sound menu DVD V V S S OFF Dialog Enhancer OFF RAM DVD R Picture V S S RAM DVD R DVD V Only with Dolby Digital with 2 or more channels Enjoy a surround like effect if you are using two front speakers only The effect is broadened and sound seems to come from virtual speakers on either side if the disc has surround signals recorded on it Natural Emphasis lt gt OFF Note eV S S will not work or will have less effect with some discs even if you select Natural or Emphasis eTurn V S S off if it causes distortion Dialog Enhancer RAM DVD R DVD V Dolby Digital 3 channel or over only channel The volume of the center channel is raised to make dialog easier to hear ON lt 0FF including a center Repeat play RAM DVD R DVD V gt KA LA During play Use A V ED Ed A Marker EAU EXIT Picture The display changes as illustrated RAM DVD R PRG PROGRAMME lt gt AIl lt gt OFF t 1 DVD V Chapter lt
51. DD The password is entered and the unit is locked Now when you insert a DVD Video that exceeds the ratings limit you set amessage appears on the television Follow the on screen instructions When changing ratings The password screen is shown when you select Ratings 1 Input a 4 digit password with the numeric buttons and press ENTER ID Unlock Recorder To unlock the unit and return the rating to 8 To change your password To change the rating level To temporarily unlock the unit the unit locks again if you switch it to standby or open the disc tray 2 Select the item with A V ID and press ENTER EI Actual screens depend on the operation Follow the on screen instructions Change Password Change Level Temporary Unlock 62 Changing the unit s settings continued Digital output Change these settings when you have connected equipment through this units OPTICAL DIGITAL AUDIO OUT terminal PCM Down Conversion Off Factory preset When you have used audio cables to connect the unit to other equipment analog connection B page 55 On When you have used an optical digital cable to connect the unit to other equipment digital connection A page 55 Output is limited to 48 kHz 16 bit Output of audio with a sampling frequency of 96 kHz Audio is output as follows in accordance with the connections and settings you make Connection Setting A digital B anal
52. DVD Recorder with a brand new Q Link TV 16 To Set Up this DVD Recorder with an existing Q Link TV 17 Auto Setup without Q Link Functions nmeeseneeen 17 Removing Interferente t een ginn 18 Video Plus Codes for Satellite Receivers Cable TV 18 Selecting TV screen type uunsnsaansnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 19 Playing discs uuuunnsunnnnnannnnnnnnnnnnnnnnnn 20 Erasing a programme that is being played oo ees 20 Starting play from where you stopped it Resume Function 21 Fast forward and rewind SEARCH eeenennnen 21 Slow motion play Frame by frame viewing E SIP a era are are air Starting play from a selected programme title chapter or track22 anual SKI Dien o case sees Selecting an amount of time to skip Time Slip A Changingaudio Ha clar hee an EE cis arking places to play again MARKER eee Using menus to play MP3 discs enennnnen Recording television programmMeS ooocooncccccnncnccnonnncnnnananinnnnnns Flexible recording mode FR One Touch Recording Specify a time to stop recording 27 Playing while you are recording Playing from the beginning of the programme you are recording Chasing play au ae a a a aa ten 29 Simultaneous recording and play 29 Checking the recording during recording TIME SLIP Watching the television while recording Using the FUNCTION
53. Disc Protection Erase all programmes TIMER RECORDING pate Img cH TIMER RECORDING DVD R DVD R page 37 page 38 page 39 page 39 Checking the timer programming RAM Registering programmes and making corrections Canceling timer recordings SETUP SETUP Settings for the unit and discs DIRECT NAVIGATOR DIRECT NAVIGATOR Enter Title Properties Protection Partial Erase Divide P LAY yy Disc play RESUME PLAY Ty ESUME PLAY Start play from the point you stopped p TOP PLAY TOP PLAY DVD R RAM DVD R RAM DVD R page 40 page 35 page 34 page 35 RAM DVD R DVD V RAM DVD R RAM DVD R RAM DVD R RAM DVD R RAM RAM RAM LUH Settings depend on the ype of disc page 59 page 41 page 42 page 42 page 42 page 43 page 44 page 44 RAM DVD R DVD V DLE page 20 ay RAM DVD R DVD V DL page 21 Start play from the oldest programme on the disc RAM DVD R DVD V DL page 20 Using the FUNCTIONS window continued CREATE PLAY LIST a NS CREATE PLAY LIST Creating play lists PLAY LIST PLAY LIST Playing Play Lists
54. F when the DVD Recorder is connected to the TV via the 21 pin Scart cable Press the numeric 0 button or 1 v CH to display Skip the step 4 if using a 21 pin Scart cable 21 gt 68 RF OFF 4 Retune your TV until you receive the Test pattern see above illustration It may be necessary to repeat steps 2 and 3 above until you can see the Test pattern clearly 5 Press ENTER to finish this setting The clear picture 18 Video Plus Codes for Satellite Receivers Cable TV For the United Kingdom This unit is not designed to control switch on or change channel your satellite receiver or Cable TV box however it can be taught to recognise Video Plus Codes for Satellite stations The Satellite receiver or Cable TV box must be switched on and the correct station selected Some receivers have their own timer facility for this purpose Please refer to your Satellite Receiver Cable TV box instructions for use of such timer facilities For your unit to recognise the Video Plus Codes for each satellite station you must teach your unit which channel or AV input to record from for the first time Otherwise when setting a VIDEO Plus recording the symbol will appear in the channel position indicating that the unit does not know which channel position to set Once you have set the channel AV input once the unit will remember it whenever you use a Video Plus Code for the station again Prepara
55. Plus 32 Television input mode selector AV 9 Numeric buttons 0 9 222222 ann 9 eWhen selecting a title chapter track programme or play list Example 5 0 5 Example 15 1 5 eWhen selecting a page of play list scene and item of MP3 Example 5 0 0 5 Example 15 0 1 5 eWhen selecting a television channel Example 5 5 Example 15 1 5 Cancel button CANCEL 0 0 00 000ee 24 Skip buttons 44 PPI SKIP ooo 22 Stop button M 0 eee 20 Pause button MI eee eee 20 Top menu and Direct Navigator button TOP MENU DIRECT NAVIGATOR 20 41 ED Cursor buttons A Y lt gt Enter button ENTER 0ooocoococconoo oo 20 Gd Function button FUNCTIONS 30 Timer recording button TIMER 32 E Manual programming and check button PROG CHECK coccoccccc 34 ED TV on off button TV 0 cee eee eee 9 GB DVDITV switch DVD TV 0 0 0 cee eee eee 8 BD Recording button REC 26 BD Direct TV recording button 0 DIRECT TV REC 28 GED Channel up down buttons A v CH 26 GED TV volume up down buttons VOLUME 9 ED Slow Search buttons lt lt gt gt SLOW SEARCH 21 ED Play button Pm eee eee eee 20
56. Press DIRECT TV REC HZ eRecording of the TV programme that you are viewing on the TV starts ein some cases it may not be possible to change the programme position on the TV during Direct TV Recording 3 Press E to stop recording M Linked timer recordings with external equipment EXT LINK RAM DVD R If an external equipment for example a satellite receiver with a imer function is connected to the AV2 socket of this unit by a 21 pin cable it is possible to control the recording of the unit from his equipment For the connection to the external equipment see page 56 Preparation e Make sure that AV2 Connection is set to Ext Link 1 or Ext Link 2 page 61 eTimer programming has to be done on the external equipment and switch to the timer recording standby mode Refer to the equipment s operating instructions 1 Press EXT LINK E on the unit to switch the unit over to the timer recording standby mode e As long as a video picture is being transmitted by the Satellite or Digital Receiver the unit will record it The notice is displayed on the TV screen Only when Ext Link 2 is selected To delete it press ENTER GI DVD now recording this programme Yes m gt ENTER Y 0 RETURN 2 To cancel the external control turn off the timer recording standby mode of the unit by pressing EXT LINK EN again 28 Recording television programmes continued For your reference
57. R B The unit turns on and goes out eBe sure to press TIMER before the programme start time to put the unit on recording standby The programme only works if is on To stop recording while a programme is working Press TIMER B To clear a timer recording programme RAM DVD R Press CANCEL or ERASE EJ while the programme s Timer Programme Correction screen is being shown Alternatively use A V to select the programme in the Timer Programme List screen and press CANCEL or ERASE eYou can not delete programmes that are currently recording Recording from a video cassette player When connected to the other equipment RAM DVD R You can record audio and video being played on a video cassette player or a video camera connected to the input terminals Preparation eBefore connecting any cables first make sure that the power for both units is off Then after connecting any cable turn on the both units eConnect the other equipment to this unit s input terminals page 57 eSwitch DVD TV to DVD eInsert a disc that can be recorded on eSelect the recording mode XP SP LP or EP page 26 elt is also possible to perform the flexible recording FR page 27 1 While stopped Press v CH or INPUT SELECT to select the input channel for the equipment you have connected eSelect AV1 AV2 AV3 or AV4 2 Start play o
58. S window nnsnssnnnnnnsnnnnnnnnnnnnnnnnnnnnnnnnnnnn 30 About the FUNCTIONS window eeeneeeenennnnnnnn 30 Using the FUNCTIONS window 30 Timer recording z24442200444000n0nnn0nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 32 Using VIDEO Plus number to make timer recording 32 Manual programming erstma To check programmes ssec Starting and canceling programmes To clear a timer recording programme Recording from a video cassette player 36 To select the TV system PAL NTSC ennnenn 36 Erite ring titles eer eon epe aeaa naaraat danin eap cescencecceccchuatelenentes 37 DISC INFORMATION r eead E aii 37 Enter Title Disc Protector sssini ann aaa 38 Releasing disc protection ueeeeeeeeenennnneennennenn ne 38 Er seall programmesa au 39 Formatieren ten 39 Finalize Creating DVD Video uerssneenensennsensentennennn 40 Using the DIRECT NAVIGATOR uunnsersnnsennennnnnnannnnnnnnnnnnannnnn 41 Selecting programmes to play seseeeneeenennenennnnnn 41 Erasing Programmes mt td 42 Entering and editing programme titles ninia 42 Checking programme Content eeneenennnennnne 42 Protecting programmes eas Releasing programme protection eenennennnnen 43 Erasing parts of a programme 44 Dividing programmes arnan test arena 44 Using PLAY LIST to edit programmes oooccccnnccccnnnnncnnnannnnnnanes 45
59. Subtitles on off RAM DVD R Turn the subtitles on or off Angle DVD V Change the number to select an angle Audio channel RAM NA Select the audio channel page 23 PBC Playback control on off Indicates whether menu play playback control is on or off DVD V A Soundtrack Subtitle language ENG English SVE Swedish CHI Chinese FRA French NOR Norwegian KOR Korean DEU German DAN Danish MAL Malay ITA Italian POR Portuguese VIE Vietnamese ESP Spanish RUS Russian THA Thai NLD Dutch JPN Japanese x Others B Audio attributes DO Digital DTS k KHz b bit ch channel PEG Signal type Sampling frequency Number of bits Number of channels For your reference eYou can only select subtitles soundtracks and angles if they are recorded on the disc eSome discs allow changes to soundtracks subtitles and angles only by using the disc s menus elf the subtitles overlap closed captions recorded on discs turn the subtitles off Play menu RAM DVD R DVD V Keay KA LA Repeat Pla OFF 110 Marker Picture DVD R Repeat play RAM DVD V ra page 53 You can play a programme play list chapter title group or track repeatedly Marker RAM DVD R DVD V DA page 24 You can mark points on a disc to return to later Picture menu R
60. TO SEUD bilis 16 17 65 Me Chasing play unsern len 29 O A 63 CONNECUN Dirt ida 55 61 CREATE PLAY EIST ale ende aa 46 Mo DIRECT NAVIGATOR 69 28 68 Direct TV Recording Disc DISC INFORMATION 37 DolbyiDigitall ren 69 Download m nen ias 65 DISC Senn nn 69 Me A NN 20 42 EXTUNK ccoo io 28 ur Enalllz di 40 69 Hlexibleir amp c rding mode ur ner 27 Formal nn ner Frame by frame FUNCTIONS window mM kang age id abad 51 Mv Manu lktuning areas Arba 64 Market anna ns eisen Null 24 MEN si a eek ee 20 MP3 ao ta sate wan eae ak 25 MPEG ss 22a a da de nde 62 77 mo Mr RAMOS Her ee teen aed teh eae Recording Recording modes Remaining time Repeat play RESUME PLAY RGB Ms Search SETUR Siraan Agea satten 58 Simultaneous recording and play 29 Slow motion Subtitle MT Time Slip Timer recording Title Mv VIDEO Plus Mv Watching the television while recording Write protect tab 78 79 RQT6996 B Samsung Electronics U K Ltd FO103Fa0 Web site http www samsungdvd com
61. a 1 Press VIDEO Plus button VIDEO Plus Remain 0 59 SP 12 53 00 16 7 TUE Enter VIDEO Plus Number by using 0 9 keys No 10 0 2 Press the numeric buttons to enter the VIDEO Plus number VIDEO Plus Remain 0 59 SP 12 53 00 16 7 TUE AA a E elf you enter the wrong digit use lt 4 to move back and enter the correct digit 3 Press ENTER e The Timer Programme Correction screen which allows you to confirm the programme appears and make corrections if necessary Remain 1 58 SP 12 53 00 16 7 TUE Name Date Start Stop Mode PDC BBC 1 16 7TUE 1 00 200 SP OFF TIMER RECORDING Press ENTER to store new programme y Op CANCEL No ENTER RETURN O OFO e Check the programme To make corrections page 33 To programme other recordings repeat steps 1 2 and 3 32 5 If the programme is correct Press ENTER ID eThe Timer Programme List screen appears TIMER re RECORDING en No Name Date Start Stop Mode PDC 01 BBCi 16 7TUE 1 19 1 22 SP OFF OK New Timer Programme SELECT Jm CANCEL ENTER Y ORETURN Press RETURN E3 MT o put the unit on recording standby Press TIMER B Ensure lights on the unit s display Timer recording continued MiTo change the programme Remain 1 58 SP 1 19 00 16 7 TUE Name Date Start Stop Mode PDC 16 7TUE 1 00 2 00 SP OFF Title TIMER RECORDING Press ENTER to store
62. age will be displayed 2 Press lt El to select Yes and press ENTER OD eSelect No and press ENTER or press RETURN to cancel Adding Scenes to a PLAY LIST RAM Preparation eSwitch DVD TV to DVD eInsert a disc you created play lists on 1 Press PLAY LIST E 2 Use A V ED to select the desired play list and press gt ED Play Scenes Edit PL Copy PL Erase Enter Title Properties 3 Use A V to select Edit and press ENTER Re edit p sita Back 001 001 Next gt 4 Use lt gt EI to select Add and press ENTER 5 Use A V 4 gt to select the scene after the position you want to add the scene and press ENTER 6 Use search functions such as fast forward and slow motion to find the start point of the scene and press ENTER ID Scene No End ic ul ec End 0 00 05 7 Use search functions such as fast forward and slow motion to find the end point of the scene and press ENTER ID 8 Use A V to select Exit and press ENTER DD e The screen from step 4 reappears To return to the previous screen Press RETURN EX To add other scene 1 Use A V ED after step 7 to select Next and press ENTER 2 Repeat steps 6 and 7 For your reference You ca
63. are watching it To stop play and recording 1 Press E Play stops 2 Wait 2 or more seconds Press MM Recording stops e You cannot stop recording with I during timer recording To stop timer recording press TIMER B For your reference eThe playback images are displayed during chasing play e Sound is not output while fast forwarding ePlay cannot be started until at least 2 seconds after recording starts elf you fast forward and get to within a few seconds of the part being recorded the picture will change to show the images currently being played e The operation is shown on the unit s display page 5 elf you fast forward and get to within a few seconds of the part being recorded the unit automatically switches to play and shows the images about 5 seconds before You cannot get any closer than this e While this function is activated TIME SLIP indicator lights up 29 Simultaneous recording and play RAM You can start play of the programme you are recording or play a programme previously recorded Preparation Switch DVD TV to DVD During recording or timer recording 1 Press DIRECT NAVIGATOR e 0 is displayed in the direct navigator to indicate the programme is being recorded page 41 2 Use A V to select a programme and press ENTER ED 2 01 BBC 247 WED 110000 Dinosaur 02 BBCH 247WED 9 00 Football 1 For example while recording progra
64. are extremely short When the total number of programme is more than 99 Using PLAY LIST to edit programmes Displaying PLAY LIST RAM Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on Press PLAY LIST PLAY LIST The play list screen appears Scenes are not displayed if you have not yet created a play list with the disc MT o clear the PLAY LIST screen Press PLAY LIST or RETURN ES The screen returns to the state it was in before you called up the play list Mi What you can do with the PLAY LIST screen eCreating PLAY LIST page 46 ePlaying PLAY LIST page 47 Play Scenes eSelect a scene to play page 47 Edit e Add move re edit and erase scenes pages 48 49 PL Copy eCopying PLAY LIST page 50 PL Erase e Erasing a PLAY LIST page 50 eGive PLAN LIST titles page 50 Enter Title eChecking PLAY LIST s contents Properties page 50 For your reference eWhen the disc is protected pages 38 72 you can only access Play Scenes and Properties Release the protection to access other items 45 About the PLAY LIST Scene screen 001 001 a Play list information This shows the play list number date of creation date month total play time and the number of scenes it contains and title if entered Scenes 9 scenes can be shown on a page Turning pa
65. are recorded E appears on the display Remote control The remote control doesn t work e The unit is on standby to make a timer recording on the unit s display is on page 32 e DVD TV is not switched to DVD Switch to DVD when operating this unit page 8 eThe batteries are depleted Replace them with new ones page 8 e Point the remote control at the remote control sensor on the main unit page 8 eRemove obstacles from between the remote control and main unit e The Child Lock function is activated page 54 74 Troubleshooting guide continued Recording and timer recording VIDEO Plus programming does eThe clock is wrong not work properly Go to Settings in the SETUP menus and correct the clock with Clock page 63 elf appears under Name after entering a VIDEO Plus number page 33 The unit switches to standby eThe unit switches to standby while making a timer recording if the disc runs out of space while making a timer recording Use a disc that has enough space to record the programme The available recording time eThe available recording time on DVD R does not increase when you erase programmes doesn t increase even after eThe available recording time does not increase if you erase data written to the disc with the erasing all recordings on the disc DVD RAM drive of a computer Format the disc if necessary page 39 Discs ma
66. ashes 8 Main display section when there are less than 10 minutes to go before timer Timer recording recording is programmed but the unit is not on standby Recording and play counter pages 32 and 34 Remaining recording time 3 Disc type Current time DVD RAM DVD RAM Title track chapter group DVD R DVD R Miscellaneous messages DVD V DVD Video etc VCD Video CD eRemaining recording time CD Audio CD MP3 disc For example 4 The display mode of the main display section 1 hour Displayed as R 1 00 GRP group number TITLE title number TRACK track number CHAP chapter number PG programme number PL play list number 5 Recording mode pages 26 and 33 XP High quality mode SP Normal mode LP Long play mode EP Extra long play mode XP SP LP EP all on FR mode in flexible recording or in timer recording Warning and Important Information CAUTION THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PRODUCT DAMAGE DO NOT EXPOSE THIS EQUIPMENT TO RAIN MOISTURE DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE EQUIPMENT As this equipment gets hot during use operate it
67. asing all programmes 5 Use 4 E to select Start and press ENTER Erase all programmes All programmes and Play Lists will be completely erased It is OK to start erasing all programmes All programmes and play lists are erased MT o stop partway through Select No in step 4 or Cancel in step 5 and press ENTER ID Or Press RETURN Note eYou cannot erase computer data eThe disc title will also be erased elf protection is active on even one programme page 43 you cannot erase all programmes For your reference eNothing will be erased if the disc is write protected pages 38 72 Format RAM Some DVD RAM are unformatted You must format these discs before you can use them in this unit Formatting also allows you to erase the entire contents of a disc Preparation eSwitch DVD TV to DVD eInsert the disc you want to format DISC INFORMATION continued 1 While stopped Press FUNCTIONS ID 2 Use A Y lt gt EI to select DISC INFORMATION and press ENTER EI y DISC INFORMATION 3 Use A V ED to select Format and press ENTER D Enter Title Disc Protection E Erase all programmes Format 4 Use 4 EI to select Yes and press ENTER Format Disc Formatting the Disc will erase all contents This will take approximately 1 minute Start formatting the disc
68. ay of DVDs unsuitable for some audiences children for example Play and changes to the settings are not possible unless you enter a password Setting ratings When level 8 is selected 8 No Limit All DVD Video can be played 1 to 7 Prohibits play of DVD Video with corresponding ratings recorded on them O Lock All Prohibits play of all DVD Video Changing ratings When level 0 7 is selected Unlock Recorder Change Password Change Level Temporary Unlock Language code list Abkhazian 6566 Chinese 9072 Hausa 7265 Afar 6565 Corsican 6779 Hebrew 7387 Afrikaans 6570 Croatian 7282 Hindi 7273 Albanian 8381 Czech 6783 Hungarian 7285 Ameharic 6577 Danish 6865 Icelandic 7383 Arabic 6582 Dutch 7876 Indonesian 7378 Armenian 7289 English 6978 Interlingua 7365 Assamese 6583 Esperanto 6979 Irish 7165 Aymara 6588 Estonian 6984 Italian 7384 Azerbaijani 6590 Faroese 7079 Japanese 7465 Bashkir 6665 Fiji 7074 Javanese 7487 Basque 6985 Finnish 7073 annada 7578 Bengali Bangla 6678 French 7082 ashmiri 7583 Bhutani 6890 Frisian 7089 azakh 7575 Bihari 6672 Galician 7176 irghiz 7589 Breton 6682 Georgian 7565 orean 7579 Bulgarian 6671 German 6869 urdish 7585 Burmese 7789 Greek 6976 Laotian 7679 Byelorussian 6669 Greenlandic 7576 Latin 7665 Cambodian 7577 Guarani 7178 Latvian Lettish 7686 Catalan 6765
69. d Start formatting the disc appears in step 5 Select Start if you want to format the disc The contents will be erased even if they have been protected Finalize Creating DVD Video DVD R You can play DVD R on compatible DVD players by finalizing hem on this unit effectively making them into DVD Video The menus you create with this unit can also be used on the player Preparation eSwitch DVD TV to DVD e Insert the disc you want to finalize 1 While stopped Press FUNCTIONS 2 Use A V lt gt EI to select DISC INFORMATION and press ENTER EI y DISC INFORMATION 3 Use A V ED to select Finalize and press ENTER D N aea opaze Enter Title Finalize 4 Use 4 EI to select Yes and press ENTER Finalize This will take approximately O minutes Start finalizing the disc No 5 Use 4 EI to select Start and press ENTER Finalize Finalize will make this disc playback only Start finalizing the disc eFinalizing starts The message Finalizing is finished appears when finalizing is finished MW To stop finalizing Select No in step 4 or Cancel in step 5 and press ENTER 10 Or Press RETURN Note e Do not turn the unit off or disconnect the AC mains lead while the message Finalizing the Disc is on the television This
70. d it Resume Function RAM DVD R DVD V gt 71 DG 1 During play Press E 9 e The unit remembers the position 2 Press gt E e Play starts from where you stopped it To cancel the resume function Press W while the unit remembers the position The position is also cleared when you turn the unit off MT o start play from a memorized position after turning the unit off Press POSITION MEMORY EB during play The message Position Memorized appears on the television ow when you press P after switching the unit to standby and back on play starts from the memorized position For your reference DVD R DVD V MP3 eThe position memorized when you press ll ES or POSITION MEMORY is cleared when you open the disc tray RAM e The position memory is written to the disc and remains intact until you mark a different position You cannot mark positions if the disc is write protected with DISC INFORMATION page 38 or with the write protect tab page 72 Release the protection before marking position elf you press W ES before switching the unit to standby after pressing POSITION MEMORY to memorize a position play will resume from the position you pressed W ES when you press gt E 21 Playing discs continued Fast forward and rewind SEARCH RAM DVD R DVD V gt KA DEI During play
71. d on After performing steps 1 to 3 of Erasing programmes perform the following steps 4 Use A Y to select Protection and press ENTER D 5 Use 4 to select Yes and press ENTER Protection Cancel Programme Protection Yes no a SELECT SIDE ENTER gt RETURN itle BBC1 247 WED 10 00 Football BBCH 247 WED 9 00 Dinosaur BBCH 247 WED 19 00 USJ SELECT TOTAL 3 No O O een oretu The padlock mark disappears To stop partway through Select No in step 5 and press ENTER ID Or Press RETURN Erasing parts of a programme RAM The specified parts of the programme are erased completely when you use this procedure and cannot be retrieved Check the programme carefully to ensure it isn t one you want to keep Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on After performing steps 1 to 3 of Erasing programmes perform the following steps 4 Use A V to select Partial Erase and press ENTER D 5 Use search functions such as fast forward and slow motion to find the start point of the part you want to erase and press ENTER ID Start End EJ End 6 Use search functions such as fast forward and slow motion to find the end point of the part you want to erase and press ENTER ID Next r fw Use A V D
72. d press ENTER DISC INFORMATION 3 Use A V to select Enter Title and press ENTER D ose Enter Title Disc Protection E Erase all programmes Format 4 LJ 2 1 1 15116 7 6 81 0 a 8 c alle IE i MEF dana elh olh Gelse SKE kee m in o fm m folu e lo r s e lla riisin uy eeb 00 0 50 bd I nm g M IPCC EGET la Note eYou can give DVD RAM titles of up to 64 characters and DVD R titles of up to 40 characters eYou cannot give DVD R titles once they have been finalized Disc Protection RAM This allows you to protect discs from accidental erasure Preparation eSwitch DVD TV to DVD eInsert the disc you want to protect 1 While stopped Press FUNCTIONS ED 2 Use A Y lt gt EI to select DISC INFORMATION and press ENTER y DISC INFORMATION 3 Use A V ED to select Disc Protection and ress ENTER Disc INFORMATION Ge Erase all programmes Format Disc Protection Set up Disc Protection Enter Title Disc Protection EDI Erase all programmes Format MT o stop partway through Select No in step 4 and press ENTER ID Or Press RETURN DISC INFORMATION continued Releasing disc protection RAM This allows you to release disc protect
73. e Receiver using RF leads Using this connection method may however be difficult to obtain a clear picture from the Satellite Receiver For this reason it is not recommended for inexperienced users See preferred connection on page 12 Aerial Input socket Satellite Receiver not supplied Aerial 1 not supplied Aerial Output socket RF lead ied 2 To AC Mains socket 4 not supplied TV not supplied RF Input socket AC Input socket pE RF Output socket RF lead supplied 3 eMust be connected to watch TV channels AC Mains lead supplied 4 To AC Mains socket 4 1 Connect the aerial to the aerial input socket of the Note Satellite Receiver elf you do not have a Satellite Receiver connect the aerial to the RF Input socket of the DVD Recorder and go to step 3 elf you have an analogue satellite receiver select SKY ONE or SKY NEWS on the receiver before starting Auto Setup After Auto Setup is complete the satellite position will be shown as SAT in the channel listing to denote programmes from the satellite receiver elf you have a digital satellite receiver you can start Auto Setup with the receiver set to any channel We recommend to manually name the SAT position after Auto Setup is complete See page 64 Satellite Receiver 2 Connect the aerial from Satellite Receiver to the RF Input socket Satellite Receiver 3 Connect the RF Output socke
74. e video is recorded in a 4 3 aspect irrespective of the video signal input Use the television s screen modes to change the screen size for play e Some broadcasts carry signals that allow you to make one copy but you cannot record these broadcast with DVD R Use DVD RAM to record these kinds of broadcast e Play may be impossible in some cases due the condition of the recording eYou cannot change audio type if a DVD R is in the unit Select the audio type M1 or M2 before recording by going to Bilingual Audio Selection in the Sound menu 11 Discs continued Audio format logos DO Dolby Digital pages 54 and 69 DIGITAL This unit can play Dolby Digital in stereo 2 channels Connect an amplifier with a built in Dolby Digital decoder to enjoy surround sound DTS Digital Surround pages 54 and 69 Connect this unit to equipment that has a DTS decoder to enjoy DVDs with this mark DIGITAL SURROUND Types of disc for the type of connected TV When you use the discs recorded either PAL or NTSC refer to this table TV type Disc Yes No Multi PAL Yes a liso Yes PAL No NTSC TV NTSC Yes PAL Yes PAL TV NTSC Yes PAL60 1 If you select NTSC in TV System page 61 the picture may be clearer 2 If your television is not equipped to handle PAL 525 60 signals the picture will not be shown correctly Connections with Scart leads Follow t
75. ean and dry cloth e Install the unit in a horizontal position eKeep the unit TV and other equipment switched off until you have finished all connections en 2322 0U VIDEO Plus and PlusCode are registered trademarks of Gemstar Development Corporation The VIDEO Plus system is manufactured under license from Gemstar Development Corporation MPEG Layer 3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia Notes on these instructions These operating instructions describe operations mainly using the remote control Ifthe name of the button is the same the operation described can also be performed with the main unit The contents of the screens used in these instructions may not necessarily match what you will see on your screen Displays The displays shown in these instructions are examples only Actual displays depends on the disc being played Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc S CLAS LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT A aaa Inside of unit DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM FDA 21 CFR CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM IEC60825 1 E
76. efore finalizing You can record onto the available space on the disc and perform editing functions such as giving titles to discs and programmes and erasing programmes You cannot record to or edit DVD R with this unit if it was recorded with another unit whether it is finalized or not You cannot record over parts that have been recorded Erasing programmes will not increase the disc s available time M After finalizing The video and audio is recorded according to the DVD Video specifications and your very own DVD Video is created eThe titles you entered with this unit appear as menus eProgrammes longer than 5 minutes are divided into 5 minute chapters e These DVD R can no longer be recorded on or edited e These DVD R can be played on other DVD players but this is not guaranteed Play may not be possible due to the player you are using the DVD R or the condition of the recording Use this unit to play the disc if the player is unable pil or your reference t takes about 30 seconds for the unit to complete recording management information after recording finishes To record on DVD R this unit optimizes the disc for each ecording Optimizing is carried out when you start recording after inserting the disc or turning the unit on Recording may become impossible after the disc is optimized more than 50 imes e The first 30 seconds of a programme may not be recorded if you make successive timer recordings e Th
77. ensure that it is refitted when the fuse is replaced If you lose the fuse cover the plug must not be used until a replacement cover is obtained A replacement fuse cover can be purchased from your local Samsung Dealer IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET If anew plug is to be fitted please observe the wiring code as shown below If in any doubt please consult a qualified electrician IMPORTANT The wires in this mains lead are coloured in accordance with the following code Blue Neutral Brown Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the erminals in your plug proceed as follows The wire which is coloured BLUE must be connected to the erminal in the plug which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the erminal in the plug which is marked with the letter L or coloured RED Under no circumstances should either of these wires be connected to the earth terminal of the three pin plug marked with he letter E or the Earth Symbol How to replace the Fuse e There are two types of the AC mains lead assembly and as shown 1 Open the fuse compartment wit
78. es the Automatic time correction function and time is corrected automatically Preparation Switch DVD TV EB to DVD ePress FUNCTIONS to show the FUNCTIONS window 1 Use A V lt gt UD to select SETUP and press ENTER D eThe SETUP screen appears 2 Use A V to select the Settings tab and press lt 4 or gt ED 3 Use A V to select Clock and press ENTER D Clock Automatic or Date 1 8 2003 Please set the clock ENTER access RETURN leave 4 Use A V ED to select On of Automatic and press ENTER ID eAuto clock setting starts eUnder adverse reception conditions etc the automatic time correction function may not work In this case the indication for Automatic is automatically reset to Off If the reception conditions improve later on it may be possible to activate this function Clock Automatic On Time Date 15 45 39 1 8 2003 Automatic clock setting Please wait RETURN to abort e The following screen appears when setting is complete Automatic On Date 1 8 2003 Automatic clock setting completed ENTER access RETURN leave 5 Press RETURN E To stop auto clock setting Press RETURN Note elf Automatic is set to On when you open the Clock screen do not set it to Off otherwise the automatic time correcting function is deactivated eW
79. for any subsequent damage caused by such loss Examples of causes of such losses are 1 A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company 2 A disc used as described in 1 and then played again in this unit 3 A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit Note eThis unit is compatible with the Content Protection for Recordable Media CPRM system so you can record broadcasts that allow one copy such as some CATV broadcasts onto 4 7 GB 9 4 GB DVD RAM these are CPRM compatible It is not possible to record onto DVD R or 2 8 GB DVD RAM Do not allow the disc to become dirty or scratched Fingerprints dirt dust and scratches on the recording surface may make it impossible to use the disc for recording f you use DVD RAM cartridges you can protect your recordings with the write protected tab page 72 With the tab in this position you cannot record to the disc delete programmes with he direct navigator edit with the play list screen or format the disc This unit is compatible with both non cartridge and cartridge DVD RAM but cartridge type discs give better protection to your valuable recordings For your reference e DVD RAM recorded on this unit cannot be played on incompatible players including players manufactured by Samsung eThis unit cannot record PAL
80. g steps 1 to 3 of Erasing programmes perform the following steps 4 Use A V ED to select Properties and press ENTER D eThe contents of the programme are shown Properties Football No 3 On 1 02 Date 19 72002T0E Time 0 01 SP Name BBC 1 SID ENTER v e RETURN To return to the previous screen Press RETURN EX Using the DIRECT NAVIGATOR continued Protecting programmes RAM You can prevent accidental erasure of programmes by write protecting them Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on After performing steps 1 to 3 of Erasing programmes perform the following steps 4 Use A V ED to select Protection and press ENTER D 5 Use lt EI to select Yes and press ENTER Protection Set Up Programme Protection Yes mo a SELECT mr ENTERZ gt RETURN No Name Date Time le T BBC1 24 7WED 10 00 Football 5502 BBC 247 WED 19 00 Dinosaur H BBCH 247 WED 11 00 USJ ofl TOTAL3 No Co The padlock mark appears MT o stop partway through Select No in step 5 and press ENTER ID Or Press RETURN For your reference Programmes will be erased even if they are protected if you format the disc with DISC INFORMATION page 39 43 Releasing programme protection RAM Preparation eSwitch DVD TV BY to DVD e Insert a disc you have recorde
81. ge the part being played Press A V to enter the time ePress A EI to increase or Y to decrease in one minute units Press and hold A to increase or Y to decrease in 10 minute units MT o show the play images in full Press TIME SLIP EN ePress TIME SLIP to return to the picture in picture screen MT o stop play and recording 1 Press E Play stops 2 Wait 2 or more seconds Press MM Recording stops e You cannot stop recording with MM during timer recording To stop timer recording press TIMER B For your reference eThe sound for the images being played is heard during Time Slip eWhile this function is activated TIME SLIP indicator lights up eThe image on the small screen may be distorted or flicker depending on the scene However this does not affect the image recorded Watching the television while recording Preparation Switch DVD TV B to TV 1 Press AV to change the input mode to TV 2 Press r v CH to change channels eYou can also select the channel with the numeric buttons O For your reference eYou can also do this if the unit is making a timer recording eThe recording is unaffected 30 Using the FUNCTIONS window About the FUNCTIONS window Most of the features and functions of this unit can also be controlled with icons The examples show the FUNCTIONS window when a DVD RAM is being used Actual menus depend on the
82. ges If there are more than 9 scenes use A Y lt gt ED to select Back or Next and press ENTER to move to the previous page or next page You can also enter the three digits with the numeric buttons Using PLAY LIST to edit programmes continued Creating PLAY LIST RAM You can specify start and end points to create a scene then specify the order in which these scenes are played These scenes are not recorded separately so this doesn t use up much of the disc s capacity Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on 1 While stopped Press FUNCTIONS ED 2 Use A Y 4 gt to select CREATE PLAY LIST and press ENTER ID ke ICREATE PLAY LIST 3 Use search functions such as fast forward and slow motion to find the start point of the scene and press ENTER ID PLAY LIST Creation Scene No E Start End e N 2 mo e 4 Use search functions such as fast forward and slow motion to find the end point of the scene and press ENTER ID PLAY LIST ig Scene No Next bse A 6 End ENTER ms Wo RETURN 5 Use A V to select Exit and press ENTER To stop partway through Press RETURN To clear the PLAY LIST screen Press PLAY LIST or RETURN The screen returns to the state
83. gramme is write protected Release the protection with the direct navigator page 43 eThe disc is write protected Release the protection with the disc protection sub menu of DISC INFORMATION page 38 Cannot finish recording completely eThe programme was copy protected eThe disc is full eRecording was not completed for some other reason Cannot record on the disc eThe disc is scratched Use another disc eThe disc is dirty Clean the disc as described in these operating instructions page 68 Please set clock eThe clock is not set correctly Reset the clock using Manual Clock Setting page 63 This disc may not be played in your region eYou tried to play a disc with a region number different from this unit s region number This unit can play only play discs with the region numbers compatible with this unit page 10 Your selection exceeds the recorder s rating limit eA ratings level has been set for DVD Video with this unit Temporarily unlock the unit with Ratings in the disc menu page 62 Error has occurred Please press ENTER eYou can operate the unit using the ENTER only e After you press the ENTER turn off the unit and then turn it on Recovery starts Please check the disc eCheck the discs for dirt or scratches page 68 Please change the disc eYou can operate the unit using the 4 OPEN CLOSE EB only ePress 4 OPEN CLOSE EB t
84. h a screwdriver 2 Replace the fuse and fuse cover Checking the Accessories Check that you have the accessories shown Tick off as you ET wack the accessories Lv _JAC Mains lead Audio Video Cable RF lead to connect VCR and TV Batteries for the Remote Control Remote Control R6 size Guarantee Card Quick Start Guide For United Kingdom and Republic of Ireland www samsungdvd com eOrder accessory and consumable items for your product with ease and confidence by telephoning our Customer Care Centre Mon Friday 9 00am 5 30pm Excluding public holidays eOr go on line through our Internet Accessory ordering application eMost major credit and debit cards accepted eAll enquiries transactions and distribution facilities are provided directly by Samsung UK Ltd et couldn t be simpler Customer Care Centre Samsung Electronics U K Ltd Euro Service Centre Stafford Park 12 TELFORD Shropshire TF3 3BJ Tel 0870 242 0303 Fax 01952 297617 The remote control Batteries e Insert so the poles and match those in the remote control e Do not use rechargeable type batteries R6 AA UM 3 Do not emix old and new batteries e use different types at the same time eheat or expose to flame etake apart or short circuit e attempt to recharge alkaline or manganese batteries euse batteries if the covering has been peeled
85. h your local broadcaster for more information The beginnings of recordings may not be recorded correctly in some cases Title Chapter DVD Video DVD Video are divided up into large sections titles and smaller sections chapters The numbers allocated to these sections are called title numbers and chapter numbers Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Track This is the smallest division on CD and Video CD and usually equates to a single song Example 70 Self diagnosis The self diagnosis displays appear if a problem occurs with the unit The service numbers in the table appear when a problem occurs eThe service numbers are a U followed by two digits Service number or the AC mains plug was disconnected while the power was ON rvi 4 ES Unit status Solutions number NO READ The disc is dirty or badly eFollow the instructions in Maintenance and Handling to clean the disc if it is dirty scratched page 68 eThe disc cannot be played if it is scratched and this display doesn t disappear It cannot be read for the e t cannot be read for the disk which doesn t cope with it Exchange a disk disk which doesn t cope with it The DVD RAM PD lens eTake the cleaner out of the unit cleaner has finished cleaning UNSUPPORT You have inserted a disc Insert a disc the unit can play or record on page 10 the unit can
86. he disc carefully eRecording is not possible unless you set Disc Protection in DISC INFORMATION to Off page 38 eYou cannot record to a disc if the write protect tab on a cartridge disc is set to protect Release this before operation page 72 eEven if the unit is put in the timer recording standby mode or the timer recording is being performed you can play a programme elf the unit is not put in the timer recording standby mode at the latest 10 minutes before the programmed timer recording starting time the flashes on the unit display In this case press the TIMER button to put the unit in the timer recording standby mode eWhen recording more than one programme in a row for DVD RAM the first few seconds and for DVD R about the first 30 seconds of all programmes from the second one onwards will not be recorded To check programmes RAM DVD R Press PROG CHECK Ep The Timer Programme List screen appears TIMER A Remain 1 58 SP RECORDING 1 19 00 17 TUE Name Date Start Stop Mode PDC spac 16 7TUE 1 19 1 22 16 7TUE 1 20 2 20 24 7WED 8 00 9 00 24 7WED 9 00 10 00 24 7WED 10 00 11 00 New Timer Programme Icon explanations This programme is currently recording O _ The programme is overlap with another programme Q The disc was full or the maximum number of programmes or scenes was reached so the programme failed to record KI
87. he step by step guide below RF Input socket RF Output socket AV1 TV 21 pin Scart socket Aerial not supplied AV2 DECODER EXT 21 pin Scart socket TV with or without Q link function not supplied supplied AC Mains lead supplied AV2 socket 3 Satellite Receiver not supplied 21 pin Scart socket DVD Necessary for AV1 socket TV with Q Link 6 To AC Mains socket 4 Necessary for Connecting a Satellite Receiver Note 21 pin Scart leads are not supplied To AC Mains socket 6 21 pin Scart socket TV 1 Connect the aerial to the RF Input socket of the DVD 5 Connect the TV scart socket of your Satellite Recorder Receiver to the AV1 scart socket of your TV optional If you are not connecting a Satellite Receiver skip this step Satellite Receiver 2 Connect the RF lead from the RF Output socket of the DVD Recorder to the TV aerial input socket 6 Plug the TV DVD Recorder and Satellite Receiver into the mains as shown at top of the page Hint eQ Link offers a range of convenient functions For example downloading of the tuning positions of all available television stations into your unit s memory if you connect the unit to your television with a fully wired 21 pin Scart cable not supplied Features similar to Q Link have different names and may not work the same Q Link is a registered trademark of Panasonic DATA LOGIC is a registered trademark of Metz
88. hen Automatic on the Clock setting menu is set to On the automatic time correction function checks and if necessary adjusts the time several times every day ein case of a power failure an automatic back up system automatically maintains the operation of the clock for approximate 120 minutes Channel Settings Preparation eSwitch DVD TV to DVD ePress FUNCTIONS to show the FUNCTIONS window Selecting the manual tuning 1 Use A V lt gt to select SETUP and press ENTER e The SETUP screen appears 2 Use A V to select the Tuning tab and press 4 or gt 3 Use A V ED to select Manual and press ENTER D Manual Auto Setup Restart 4 Use A V to select the TV station that you want to tune and press ENTER ED eThe TUNING BOX screen appears z gt 3 0 00 on sjon Al Manual Pos 1 UL Name EEE Channel A Auto Title Page Br OR m RETURN CC mr RETURN leave ENTER store 64 Changing the unit s settings continued Handling the TUNING BOX screen Use A Y lt gt KI to select the desired field and press ENTER ED Pos To change the order in which the TV stations are assigned to the programme positions Press the numeric buttons to enter the number of the desired programme position Name To enter or change the name of a TV station Use A Y
89. his is the compressed form of digital signals A decoder decodes these signals into 5 1 surround and multi channel signals Channel when referring to DVD Sound is divided into channels based on the sound s role For example 5 1 channel eFront speakers 1 left channel and 1 right channel eCenter speaker 1 channel eSurround speakers 1 left channel and 1 right channel eSubwoofer 1 channelx0 1 the ratio of bass to the total amount of sound output Examples as shown in the status display 3 2 1 ch 1 2 3 1 1 Subwoofer signal not displayed if there is no subwoofer signal No surround Mono surround Stereo surround left right Center Front left Front right Front left Front right Center 2 0 4 2 3 1 2 3 DIRECT NAVIGATOR This is a list of programmes you have recorded You can select programmes from the list to view The list also shows the date and time of recording the channel and the titles of titled programmes The selected programme is played in the background making selection even simpler Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories Apart from stereo 2 channel audio these signals can also be 5 1 channel audio A large amount of audio information can be recorded on one disc using this method Dolby Pro Logic A surround system where a 4 channel audio track is recorded as 2 channels and then is restored to 4 channels fo
90. in a well ventilated place do not install this equipment in a confined space such as a book case or similar unit Important Your attention is drawn to the fact that the recording of pre recorded tapes or discs or other published or broadcast material may infringe copyright laws For your safety Do not remove outer cover Touching internal parts of the unit is dangerous and may seriously damage it To prevent electric shock do not remove cover There are no user serviceable parts inside Refer all servicing to qualified service personnel For your safety be sure not to connect or handle the equipment ith wet hands isposal of old equipment atteries packaging and old equipment should not be sposed of as domestic waste but in accordance ith the applicable regulations autions before you operate this unit Do not place in an enclosed area so that the rear cooling fan and the cooling vents on the side are covered up Avoid e Humidity and dust eExtreme heat such as direct sunlight e Magnets or electromagnetic objects e Touching internal parts of the unit eWater or some other liquid Lightning Disconnect the aerial plug from the unit during ightning storms e Anything heavy on the unit eConnecting or handling the equipment with wet hands e Using a cell phone near the unit because doing so may cause noise to adversely affect the picture and sound Do eWipe the unit with a cl
91. ins stored in the unit s memory and you do not need to enter it again in the future Note eThe built in clock employs 24 hour system eThe actual time recorded may be longer than the programme itself when television programmes are recorded using VIDEO Plus e Invalid Entry is displayed when you enter the wrong code Reenter the code e PROG FULL is displayed in the unit s display if there are already 16 items programmed Delete unnecessary items page 35 eThe remaining time displayed is calculated based on the current recording mode eWhen recording more than one programme in a row for DVD RAM the first few seconds and for DVD R about the first 30 seconds of all programmes from the second one onwards will not be recorded eRecording is not possible unless you set Disc Protection in DISC INFORMATION to Off page 38 eYou can not record to a disc if the write protect tab on a cartridge disc is set to protect Release this before operation page 72 eEven if the unit is put in the timer recording standby mode or the timer recording is being performed you can play a programme elf the unit is not put in the timer recording standby mode at the latest 10 minutes before the programmed timer recording starting time the flashes on the unit display In this case press the TIMER button to put the unit in the timer recording standby mode Manual programming RAM DVD R Remote control only
92. ion Preparation eSwitch DVD TV to DVD e Insert the disc you want to release protection 1 While stopped Press FUNCTIONS ED 2 Use A Y lt gt EI to select DISC INFORMATION and press ENTER EI y DISC INFORMATION 3 Use A V to select Disc Protection and press ENTER ID ise No7 INFORMATION FON Lia Enter Title Disc Protection EDI Erase all programmes SELECT lt gt JENTER RETURN Format Disc Protection Cancel Disc Protection ISC J o INFORMATION 5 P 0 um DI Enter Title Disc Protection EDI Erase all programmes Format SELECT To stop partway through Select No in step 4 and press ENTER ID Or Press RETURN EX Erase all programmes RAM All programmes and play lists created from them will be erased irretrievably when you use this procedure Preparation eSwitch DVD TV to DVD e Insert a disc you have recorded on 1 While stopped Press FUNCTIONS ED 2 Use A V lt gt ED to select DISC INFORMATION and press ENTER p DISC INFORMATION 3 Use A V ED to select Erase all programmes and press ENTER Enter Title Disc Protection Exe Erase all programmes Format Erase all programmes All programmes and Play Lists will be erased Is it OK to start er
93. it s condition Message Message appears when This programme has already A timer recording has just started started Set DVD to timer standby mode The unit is not in the timer standby mode 10 minutes before the programmed recording start time of a timer recording message appears every minute during these 10 minutes DVD is in timer standby mode DVD or 4 OPEN CLOSE ED was pressed although the unit is in the timer standby mode DVD is in timer recording mode DVD 0 0 m O 0 REC QED 11 O or VIDEO Plus was pressed while the unit is in the timer recording mode eDepending on the type of TV used the above messages may not appear correctly The operations marked with asterisk are only available if the unit is connected to a TV featuring the Q Link function PDC PDC Programme Delivery Control Programme Delivery Control adjusts the start and stop time of a timer recording automatically to ensure the recording starts and finishes in line with the programme broadcast This is useful when a programme over runs the published times The station must be transmitting PDC and the exact time must be set for PDC to work The unit detects whether a station is transmitting PDC only during the tuning process If PDC is introduced or discontinued by a station you will need to re tune the unit before it becomes aware of this PDC transmissions are not currently nation wide so please check wit
94. it switches to standby Unit s Display Counter gt 30 gt 60 gt 90 1240 180 lt 120 1 2 Shows recording will stop in 30 minutes MT o cancel During recording press REC until the counter appears eRecording continues To show the time remaining until recording finishes Press STATUS several times DVD RAM REC OTR 30 For your reference e This does not work during timer recordings or while using flexible recording eYou cannot use the remote control to specify a time for recording to stop e Recording stops and the set time is cleared if you press MI ES e The set time is cleared if you change the recording mode or channel while recording is paused MI To immediately record the same TV programme that you are viewing on the TV Direct TV Recording This function allows you to immediately start recording the same programme that you are viewing on the TV The programme position selected on the unit automatically changes to that of the TV programme that you are viewing on the TV When you stop the recording the unit automatically switches back to the previously selected programme position Conditions for correct operation of the Direct TV Recording function eYour TV must be equipped with the Q Link function eThe unit must be connected to the TV via a fully wired 21 pin Scart cable To perform Direct TV Recording 1 Press 4 OPEN CLOSE EB to open the tray and insert a disc 2
95. ke sounds as they rotate This does not indicate a malfunction 75 Power supply Power consumption Recording system Recordable discs Recording time Playable discs Audio Recording system Audio In Input Level Input Impedance Audio Out Output Level Output Impedance Digital Audio Out MP3 Bit rate Sampling rate Television System Tuner System Channel Coverage RF Converter Output Video Video System Recording system Video In S Video In RGB In Video Out S Video Out RGB Out Specifications AC 220 240 V 50 Hz 29 W DVD video recording standards DVD RAM DVD video standards DVD R 12 cm 4 7 GB DVD RAM 12 cm 9 4 GB DVD RAM 8 cm 2 8 GB DVD RAM 12 cm 4 7 GB DVD R for General Ver 2 0 Maximum 360 min with 4 7 GB disc XP Approx 60 min SP Approx 120 min LP Approx 240 min EP Approx 360 min 12cm 4 7GB DVD RAM 12cm 9 4GB DVD RAM 8cm 2 8GB DVD RAM 12cm 4 7GB DVD R for General Ver 2 0 DVD Video CD Audio CD DA Video CD CD R RW MP3 CD DA Video CD formatted discs Dolby Digital 2ch AV1 AV2 21 pin AV3 AV4 pin jack Standard 0 5 Vrms Full scale 2 Vrms at 1 kHz more than 10 kohm AV1 AV2 21 pin Audio Out pin jack Standard 0 5 Vrms Full scale 2 Vrms at 1 kHz less than 1 kohm Optical terminal PCM Dolby Digital DTS MPEG 32 kbps 320 kbps 16 kHz 22 05 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz PAL 75 ohm
96. mme 2 sport 2 You want to watch the movie you recorded yesterday programme 1 3 Do the above operation and 4 A sports programme is recorded while you watch a movie To stop play and recording 1 Press E Play stops 2 Wait 2 or more seconds Press W Recording stops e You cannot stop recording with W ES during timer recording To stop timer recording press TIMER B For your reference e During simultaneous recording and play you cannot edit with the direct navigator or play lists elf you start play while the unit is on standby for timer recording recording starts when the time you set is reached e The unit returns to recording standby when you stop play while it is on standby for timer recording eThe operation is shown on the unit s display page 5 e Sound is not output while fast forwarding eWhile this function is activated TIME SLIP indicator lights up Playing while you are recording continued Checking the recording during recording TIME SLIP RAM You can play the programme being recorded to check that it is being recorded correctly You can also check parts that were recorded previously Preparation Switch DVD TV B to DVD While recording or timer recording Press TIME SLIP EN Play starts 30 seconds previous q 1 o 2 at 1 Play images 30 seconds before 2 Current recording To chan
97. n Switch DVD TV BY to DVD During play Press the numeric buttons to select the item page 4 This works only when stopped with some discs the screen saver is on the television VIDEOS RANT 22 Playing discs continued Manual Skip RAM DVD R Remote control only You can skip commercials easily with this feature Preparation Switch DVD TV to DVD During play Press MANUAL SKIP E Play restarts from approximately 30 seconds later Selecting an amount of time to skip Time Slip RAM DVD R You can set an amount of time and then skip with one press of a button Preparation Switch DVD TV to DVD 1 During play Press TIME SLIP ED 2 Within 5 seconds Press A V ID to enter the time and press ENTER ED ePlay skips the time you entered ePress A to increase or W to decrease in one minute units Press and hold A to increase or W to decrease in 10 minute units Note You cannot use this feature while a DIRECT NAVIGATOR page 41 or PLAY LIST page 45 screen is being displayed Changing audio RAM DVD V Remote control only You can change the audio being received or played with the ollowing procedure Preparation Switch DVD TV BY to DVD During reception or play Press AUDIO EJ to select the audio
98. n fast forward rewind pause and slow motion while playing scenes just as you can during normal play 48 Using PLAY LIST to edit programmes continued Moving a Scene RAM Preparation eSwitch DVD TV BY to DVD eInsert a disc you created play lists on After performing steps 1 to 3 of Adding Scenes to PLAY LIST perform the following steps 4 Use lt gt to select Move and press ENTER D Move Erase E gt 5 Use A Y lt gt ET to select the scene you want to move and press ENTER ID 6 Use A Y lt gt ET to select the scene currently in the position to which you want to move the scene and press ENTER e The scene you selected in step 5 moves to the position in front of the scene selected To move another scene Repeat steps 5 and 6 To re edit a PLAY LIST Scene RAM Preparation eSwitch DVD TV to DVD e Insert a disc you created play lists on After performing steps 1 to 3 of Adding Scenes to PLAY LIST perform the following steps 4 Use lt gt Gp to select Re edit and press ENTER D Re edit caen 001 001 Next gt 5 Use A Y lt gt EI to select the scene you want
99. n the letterbox style AV1 AV2 Settings Press ENTER to show the following settings To return to the previous screen press RETURN amp p AV1 Output Video S Video RGB page 56 AV2 Input Video S Video RGB PAL only AV2 Connection NORMAL DECODER Ext Link 1 Ext Link 2 DECODER When a decoder is connected Ext Link 1 When a digital receiver which transmits a special control signal recordings via the 21 pin Scart cable for example the F U N receiver TU DSF30 S3 is connected for the linked timer recordings Ext Link 2 When an external equipment with a timer function is connected for the linked timer recordings elf you connect an other equipment with RGB output capability to the AV2 socket on this unit the output signal of the equipment must be set to RGB when you have set AV2 Input to RGB PAL only e This setting is fixed with EXT if you set TV System to NTSC 61 Entering a password Ratings You can limit play of DVDs unsuitable for some audiences children for example Play and changes to the settings are not possible unless you enter a password When setting ratings The password screen is shown when you select levels O to 7 1 Input a 4 digit password with the numeric buttons ef you enter a wrong number press lt 4 ET to erase it before you press ENTER ID e Do not forget your password 2 Press ENTER 3 Press ENTER
100. n the other equipment 3 Press REC at the point you want to start recording HETo skip unwanted parts Press HI to pause recording Press again to restart recording To stop recording Press Ml 9 Note eStop play on the other equipment as well For your reference ePoor video quality or colouring may indicate that the material you are recording has copy protection elf you connect an other equipment with RGB output capability to the AV2 socket on this unit the output signal of the equipment must be set to RGB when you have set AV2 Input to RGB PAL only e Select the TV system PAL NTSC of the programme you wish to record page 61 e Any software that has been so treated cannot be recorded using this unit To select the TV system PAL NTSC You can select the TV system PAL NTSC of the programme you wish to record page 61 Preparation Switch DVD TV to DVD 1 Press FUNCTIONS to show the FUNCTIONS window 2 Use A V lt gt ED to select SETUP and press ENTER ID 3 Use A V to select the Connection and press 4 or gt ID 4 Use A V ED to select TV System and press ENTER EI SETUP TV Aspect Norm 4 3 vr PAL Normal 4 3 TV fo Setin ove ATENEO TAB SELECT 0D 7 0 RETURN 36 Entering titles RAM DVD R You can eTitle discs with the DISC INFORMATION in the FUNCTIONS window eTitle prog
101. n the same as the controls on the remote control H Entering titles page 37 eTo enter characters Use A Y lt gt ID to select the character you want to enter and press ENTER ID U Dea 80A B eTo erase characters Press HI You can also erase characters by using A Y 4 gt to select ERASE and pressing ENTER PAUSE F 10 U O B eTo finish entering the title Press W You can also finish entering the title by using A Y 4 gt to select SET and pressing ENTER o go N ID O Deg B eTo enter a space You may enter a space by pressing and then press ENTER DD Control reference guide continued The unit s display Rotating REC recording Rotating REC PLAY Rotating PLAY playing Stopped REC recording paused recording and playing simultaneously or Stopped PLAY play paused Time Slip is in progress og REC e A gt LAY Stopped STOP Stopped STOP play stopped with the resume function play stopped without the resume function XT Link A AA A A A AA AA INA JANE JANE JANE JANE JAN JAN JAN JAN PAN AN 7 8 1 Recording indicator REC 6 External link display page 28 On On while recording when a linked timer recording with external equipment is in 2 Timer programme display standby mode or being performed On 7 Channel when a programme for timer recording is on A RI A 99 A1 A2 A3 A4 Fl
102. not play or record on U14 The unit is hot e The unit switches to standby automatically for safety reasons and you cannot operate it Wait for about 30 minutes for the service number to disappear e Select a position with good ventilation when installing the unit eDo not block the cooling fan on the rear of the unit U99 The unit fails to operate e Press to switch the unit to standby Now press again to turn the unit on properly RECOVER A power failure occurred e The unit is carrying out its recovery process Wait until the message disappears 71 Error displays Error messages Causes and solutions No Disc eYou haven t inserted a disc Correctly insert a disc that this unit can play page 20 eThe disc is upside down If it is a single sided disc insert it so the label is facing up page 20 This is a non recordable disc This disc is not properly formatted Formatting is necessary using DISC INFORMATION eThe unit cannot record on the disc you inserted The unit cannot record onto finalized DVD R DVD Video CDs or video CDs nsert a DVD RAM or unfinalized DVD R page 10 You inserted an unformatted DVD RAM Format the disc with this unit page 39 Please check write protect tab on the disc The write protect tab on the cartridge is set o PROTECT Use a ballpoint pen or similar to release the write protection Contents of this disc are protected eThe pro
103. o open the tray and eject a disc the unit becomes off eTo continue play or recording insert an another disc 72 Troubleshooting guide Before requesting service make the below checks If you are in doubt about some of the check points or if the remedies indicated in the chart do not solve the problem consult your dealer for instructions Power The unit is on but cannot be eThe unit is hot U14 appears on the display operated Wait for U14 to disappear One of the unit s safety devices may have activated Reset the unit as follows 1 Press I on the main unit to switch the unit to standby If the unit doesn t switch to standby press and hold I for about 10 seconds The unit is forcibly switched to standby Alternatively disconnect the AC mains lead wait one minute then reconnect it 2 Press 0 1 to turn the unit on Picture No picture e Make sure the television s input setting e g AV1 is correct pages 12 14 Screen size is wrong Check the settings on your television Check the settings for TV Aspect Norm 4 3 TV Settings DVD Video or Norm 4 3 TV Settings DVD RAM in the Connection menu pages 19 and 61 On screen messages do not e Go to Display in the SETUP menus and select Automatic for On Screen Messages appear page 61 Press STATUS to show the on screen messages constantly Sound No s
104. of the setup data from the TV to the DVD Recorder starts 5 When the programme position and the current time appear in the DVD Recorder display downloading is complete 16 Auto Setup with Q Link Functions continued To Set Up this DVD Recorder with an existing Q Link TV Switch the TV on Select the AV input on your TV Switch DVD TV ED to DVD Press 6 to switch the DVD Recorder on Downloading of the setup data starts automatically Download hon Pos 4 Download in progress please wait RETURN to abort gt gt Ob herum 5 To set up the Owner ID repeat the steps 3 8 on the previous page Owner ID PIN number Auto Setup without Q Link Functions Auto Setup automatically tunes all available stations and sets the DVD Recorder s clock to the current date and time Switch the TV on Select the AV input on your TV Switch DVD TV ED to DVD Press 5 to switch the DVD Recorder on e Auto Setup starts This takes about 5 minutes e If connected to your TV using the RF lead only Select an unused channel pre set on your TV and tune it to the RF output channel number shown on the DVD Recorder display or until you can clearly see the Auto Setup screen Store the new video playback channel refer to the instructions for your TV Auto Setup hon PIN number Ma Postcode II RETURN leave When no stations have been set confirm all connecti
105. off Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire If electrolyte leaks from the batteries consult your dealer Wash thoroughly with water if electrolyte comes in contact with any part of your body Remove if the remote control is not going to be used for a long period of time Store in a cool dark place Replace if the unit does not respond to the remote control even when held close to the front panel Use Aim at the sensor avoiding obstacles at a maximum range of 7 m directly in front of the unit eKeep the transmission window and the unit s sensor free from dust e Operation can be affected by strong light sources such as direct sunlight and the glass doors on cabinets 1 1 Remote control signal sensor 2 7m 3 Switch DVD TV to DVD Do not eput heavy objects on the remote control etake the remote control apart espill liquids onto the remote control Television operation You can control televisions by changing the remote control code Preparation eTurn on the television eSwitch DVD TV to TV 1 Refer to the chart below for the code for your television 2 Press and hold TV b and enter the two digit code with the numeric buttons eFor example 01 press 0 gt 1 e After entering the code test the remote control by turning on the television and changing channels Note elf there is more
106. og Off No output Output as 96 kHz On Converted and Converted and output as 48 kHz 16 output as 48 kHz bit 1 Audio is output at 96 kHz if the DVD is unprotected but the connected equipment must be able to handle such signals in order to play them Dolby Digital Bitstream Factory preset When you have connected a unit with a built in Dolby Digital decoder PCM When you have connected a unit that doesn t have a built in Dolby Digital decoder DTS Off Factory preset When you have connected a unit that doesn t have a built in DTS decoder Bitstream When you have connected a unit with a built in DTS decoder MPEG Bitstream When you have connected a unit with a built in MPEG decoder PCM Factory preset When you have connected a unit that doesn t have a built in MPEG decoder 2 Set Dolby Digital to PCM DTS to Off and MPEG to PCM if the other equipment doesn t have decoders Incorrect settings can cause noise to be output which can be harmful to your ears and speakers and audio will not be recorded properly to digital recording equipment Clock Settings Usually the units Auto Setup or Download function automatically adjusts the clock to correct time Under some reception conditions however the unit cannot set the clock automatically In this case follow the operation steps below to manually set the clock Manual Clock Setting Prepa
107. ons and restart Auto Setup See page 65 and Hint below To restart Auto Setup eYou can restart Auto Setup without using remote controller by pressing some buttons on the front of the unit Hold down 1 CH and v CH on the main unit simultaneously for about 5 seconds 17 Auto Setup without Q Link Functions continued Removing Interference TV screen The picture with interference In some cases interference lines or patterning or a very poor picture may appear on the TV when the DVD Recorder is connected If this happens follow the steps below to change the video playback channel RF output channel to remove the interference 1 Switch DVD TV BY to DVD 2 Press FUNCTIONS p for more than 5 seconds The RF output channel number is displayed on the unit display 3 Press the numeric buttons ED A Y ED or Tx v CH to select a channel number which differs by 2 or 3 from the present channel number For example if the original channel number was 28 enter 31 lt Before Changing gt lt After Changing gt RF OUTPUT CHANNEL RFOUTPUT CHANNEL SELECT Ob ENTER O RETURN SELECT ms ENTER O RETURN Test pattern indication Test pattern indication Unit display Unit display l Indication when the RF output Indication after changing the RF channel is 28 example I output channel to 31 example eSet the RF output channel of the DVD Recorder to RF OF
108. or the Owner ID setting menu appears Press gt and the numeric buttons EN to enter a 4 digit PIN number e Make sure that you will remember the PIN number make a note of it Owner ID O N PIN number SELECT cab 1 579 Postcode ET RETURN leave Menu for Owner ID setting 4 Press ENTER and V EI The cursor moves to Name 5 Press gt ID 6 Press A V 4 gt EI to select a letter and then press ENTER EI Repeat this to enter the name 7 Enter House No and Postcode in the same way FINISH KS 8 Press RETURN to make the Owner ID setting disappear Hint elf the Download indication is not appear select the AV input on your TV Note eThe explanations in this book refer to Panasonic Q Link TV and DVD Recorder however they may also apply to other makes of TV and DVD Recorder with similar functions to Q Link See page 12 for details elf you accidentally switch on the DVD Recorder before the TV downloading of the setup data from the TV may not be performed correctly In this case follow the steps below 1 Wait until the Auto Setup is complete on both the TV and the DVD Recorder 2 Press FUNCTIONS EB to display the FUNCTIONS window on the TV screen and then use A Y gt EI to select SETUP and press ENTER 3 Use A Y lt gt EI to select Tuning and then Download 4 Press ENTER and select Yes Downloading
109. or unit These menus allow you to perform operations by changing this information Common procedures Preparation Switch DVD TV B to DVD 1 Press DISPLAY EM Soundtrack Ea Subtitle OFF Picture Audio channel ltem Setting 2 Use A V to select the menu and press gt D 3 Use A V ED to select the item and press gt D 4 Use A V ED to select the setting eSome options require different operations Follow the on screen instructions and the instructions described later Menu To return to the previous screen Press RETURN EX MWhen you are finished Press DISPLAY ED For your reference eThe screens depend on the disc contents eDepending on the condition of the unit playing stopped etc and the type of software you are playing there are some items that you cannot select or change 51 Disc menu RAM DVD R DVD V VCD Soundtrack m Subtitle OFF Picture Audio channel Soundtrack Soundtrack language DVD V See A below Change the number to select a soundtrack Audio attribute RAM DVD R DVD V See B below Karaoke vocals on and off Karaoke DVD V only Solo ON lt 0FF Duet OFF gt V1 V2 lt Subtitle Subtitle language DVD V see A below Change the number to select a subtitle language gt V1 lt V2
110. ording eYou can also select programmes from the list in step 2 by entering a 2 digit number with the numeric buttons E If you enter a number larger than the total number of programmes the last programme is selected eTitles are only displayed if you have given the programme a title 41 About the programme list DIRECT NAVIGATOR No Name Date Time Enter Title Properties Protection Partial Erase Divide SELECTA An CAT 03 BBC 247 WED 11 00 US 04 BBCA 257 THU 12 00 Fo 05 BBCH 26 7 FRI 21 00 a Programme number broadcast name recording date time recording started programme title if entered e Programme 1 is selected in the example Write protected f eDisplayed when you have protected the programme Programme 1 has been protected in the example c Copy protected ZI eDisplayed when you have recorded a programme that has copy protection from broadcast d N P N NTSC P PAL eDisplayed when you recorded using a different encoding system from that of the TV system currently selected on the unit e Unable to play amp eDisplayed if you cannot play the programme f Currently recording O eDisplayed when the programme is being recorded Scroll bar elf there are more than six programmes you can move down the list by using A V and this bar shows your approximate position in the list h Total number of programmes eShows the total number of programmes i Sub menu eDisplayed when you use gt ET
111. ording starting and ending time by special signal Included in the broadcasting signal PDC Function PDC stands for Programme Delivery Control Ifa TV programme for example a football game runs longer than scheduled is shortened or starts earlier or later this function synchronizes the recording start and stop with the actual broadcasting start and stop of the TV programme Conditions for correct operation of the PDC function e ON must be displayed under PDC on the screen eThe TV station must broadcast PDC signals eThe programme starting time must be set correctly to the starting time listed in the newspaper magazine To activate the PDC Function Use A V EI to make the ON indication appear The station s PDC signals is detected in Auto Setup 33 Wilf appears under Name after entering a VIDEO Plus number Name stands for Programme Position TV Station Name Normally the name of the TV station or the number of the programme position is displayed under Name However if the TV station information was not automatically set during Preset Download or Auto Setup due to adverse reception conditions the indication appears instead In such a case follow the operation steps below to correct it Use A V UD repeatedly to select the programme position on which the TV programme to be recorded will be broadcast After you have entered the information of a TV station it rema
112. osition Bit Rate 10 Video bit rate when recording 11 Video bit rate when playing 12 Bit rate display eShows as Mbps Mega bit per seconds during play and recording or kbit kilobit while paused eThe method of calculating bit rate for recording and playing is different so there may be differences in the figures displayed Values are approximate For your reference eThese displays may not be shown if On Screen Messages in the Display menu is set to Off page 61 If set to Automatic displays 1 2 3 and 4 appear for 5 seconds and then disappear Maintenance and Handling Maintenance To clean this unit wipe with a soft dry cloth e Never use alcohol pai eBefore using chemical Dust and dirt may adher nt thinner or benzine to clean this unit y treated cloth read the instructions that came with the cloth carefully e to the unit s lenses over time possibly making it impossible to record or play discs Use the recommended DVD RAMIPD lens cleaner every 1 to 4 months depending on frequency of use and the operating environment Read the lens cleaner s instructions carefully before use eThe lens cleaner may make some sound during use but this does not indicate a malfunction e NO READ appears o The precision parts in thi n the unit s display when cleaning finishes s unit are readily affected by the environment especially temperature humidity and dust
113. ound eCheck the connections pages 12 14 Low volume Check the input mode on the amplifier if you have connected one pages 54 55 and 62 Distorted sound eTurn V S S OFF if it causes distortion page 52 Cannot switch audio during e You have used digital connection Connect to other equipment using audio cables analog stereo or NICAM broadcasts connection pages 14 and 55 e You cannot change the audio type when using DVD R Displays 0 00 is flashing on the unit s e The clock is not set display Go to Settings in the SETUP menus and set the clock with Clock page 63 73 Troubleshooting guide continued No response when buttons pressed Picture distorted during search Soundtrack subtitle language not the one selected with the SETUP menus Angle cannot be changed elf O appears on the television the operation is prohibited by the unit or disc e If the unit is not operating at all press O TIMER EB to switch the unit to standby then press TIMER again to turn the unit on The unit may not be operating correctly due to lightning static electricity or some other external factor eThe Child Lock function is activated page 54 eSome distortion is normal eThe language is not recorded on the disc page 59 eThis function depends on software availability Angles can only be changed during scenes where different angles
114. ped keep pressing WM ES and 4 OPEN CLOSE on the main unit for 5 or more seconds elf the playback picture on the TV screen from a Video CD isn t shown correctly When connecting to Multi system TV select NTSC After viewing the disc return the setting to PAL When connecting to PAL TV the lower part of the picture cannot be displayed correctly during the fast forward and rewind Changing the unit s settings continued Norm 4 3 TV Settings DVD Video You can select how to reflect the image on the TV when you watch 16 9 images DVD Video on 4 3 TV Pan amp Scan Letterbox Pan amp Scan Video recorded for a widescreen is played with the sides cut off ifthe pan amp scan was specified by the producer of the disc 16 9 software prohibited from being shown in the pan amp scan style will appear in the letterbox style with black bands above and below the picture despite the setting here Letterbox Video recorded for a widescreen is played in the letterbox style Norm 4 3 TV Settings DVD RAM You can select how to reflect the image on the TV when you watch 16 9 images DVD RAM on 4 3 TV Norm 4 3 Pan amp Scan Letterbox Norm 4 3 Programmes played as recorded Pan amp Scan Video recorded for a widescreen is played with the sides cut off if the pan amp scan format is specified at the time of recording Letterbox Video recorded for a widescreen is played i
115. r play The surround channel is monaural DTS Digital Surround This surround system is used in many movie theaters around the world The separation between channels is good and the compression ratio is low so realistic sound effects are possible DTS soundtracks are produced with the assumption that all channels will be used Finalize This process allows DVD R to be played on compatible equipment Frame and field Frames are the still pictures that go together to make a moving picture A frame is made up of 2 fields Frame Field Field eA frame still is made up of two alternating fields so the picture may appear blurred but overall quality is high eA field still is not blurred but it has only half the information of a frame still so picture quality is lower Linear PCM This is a form of signal that has been digitized without compressing it CDs are recorded with 44 1 kHz 16 bit PCM while DVDs use PCM between 48 kHz 16 bit and 96 kHz 24 bit allowing reproduction of greater quality sound The linear PCM signals output from the DIGITAL AUDIO OUT OPTICAL terminal are stereo 2 channel NICAM NICAM Broadcasting System This is a 2 channel sound broadcast system which in most instances provides high quality stereo sound Broadcasters can also transmit two separate mono soundtracks on this system Pan amp Scan Letterbox In general DVD Video are produced with the intention that they be viewed on a widescreen television
116. rammes with the Timer recording page 32 eTitle programmes with the DIRECT NAVIGATOR page 42 eTitle play lists with the PLAY LIST screen page 50 Preparation eSwitch DVD TV to DVD e Insert a disc with something recorded on it eSelect Titling DISC INFORMATION Titling Timer recording Titling DIRECT NAVIGATOR or Titling PLAY LIST screen 1 After the titling screen appears Use A V gt EI to select the character you want to enter and press ENTER ET eYou can enter the following characters Der 11 lelelf gt 1 eIeePFR Mmele l lt J lt l lelf JE ele EIN e leal E e ele e pls le lll e ee LIKI IE ie l ie S Ee ele Ae CIA E ke Tel LILE eee 1 2 3 4 5 6 7 8 El 0 5 1 This window shows the text you have entered Title field 2 ERASE II amp 3 SET E when you have finished entering text 4 SPACE To enter other characters Repeat step 1 2 Press M You can also finish entering the title by using A V lt gt ET to select SET and pressing ENTER I e The title is entered and the screen disappears Wi Using the numeric buttons to enter characters e g entering the letter R DT JIIKIIL 1 Press 7 to move to the 7th row ONY 2 Press 7 twice to highlight R 7P Q ls 3 Press ENTER eYou may enter a space by pressing 8 T JU V
117. ration Switch DVD TV to DVD ePress FUNCTIONS to show the FUNCTIONS window 1 Use A V lt gt to select SETUP and press ENTER D eThe SETUP screen appears DVD RAM Disc Protection Off Cartridge Protection Off e ay eS E 0 FUNCTIONS PLAY LIST La w FLEXIBLE REC N m ENTER RETURN SETUP TOP PLAY 2 Use A V ED to select the Settings tab and press lt 1 or gt 3 Dvo 1 Se CA mn Seting Picture Sound Display Connection 3 Use A V ED to select Clock and press ENTER D 4 Use A V to select Off of Automatic and press ENTER Automatic Off Date 18 Please set clock manually GHANGE SELECT ENTER store RETURN leave O RETURN 5 Use lt gt to select the item you want to change e The items change as follows Hour Minute Second Day gt Month gt Year 6 Use A V ED to change the setting and press ENTER D e You can also use the numeric buttons for setting Clock Automatic on Time Date 1545 39 LE 8 2003 If clock setting has been completed then please push RETURN Key ENTER access RETURN leave 7 Press RETURN e The SETUP screen reappears and the clock starts 63 Changing the unit s settings continued Auto Clock Setting If a TV station transmits a signal for time setting performing the operation steps below activat
118. receive RGB signal input from the decoder via the unit Glossary continued Q Link This function works only if the unit is connected via a fully wired 21 pin Scart cable to a TV featuring the Q Link or similar function Q Link offers the following functions 1 Download from the TV When you connect the unit to a TV the station list data is automatically copied from the TV to the unit and the TV stations are assigned to the programme positions on the unit in the same order as on the TV 2 Direct TV Recording By simply pressing DIRECT TV REC you can at once record the same programme that you are watching on the TV 3 TV DVD Auto On While the TV and the unit are in standby pressing gt B TOP MENU DIRECT NAVIGATOR VIDEO Plus or PROG CHECK automatically turns on both the TV and the unit If the TV is in standby and this unit is on when you press the FUNCTION or the gt B or insert the disc except DVD RAM and DVD R the TV automatically is turned on 4 DVD Auto Standby If you switch the TV to standby this unit will also switch to standby However this function only works when the unit is in Stop mode and not when the screen saver is displayed This function also does not work during the following Preset Download Auto Setup Auto Clock Setting and Manual Tuning 5 On Screen Messages When you are watching a TV programme the following unit messages appear on the TV screen to inform you of the un
119. reo with this unit alone This unit does not have a DTS decoder 54 Connecting a digital amplifier or system component A 1 Rear of this unit 2 Insert fully with this side facing up Do not bend when connecting 3 Optical digital audio cable not supplied 4 To optical digital input 5 Amplifier or system component with or without decoders not supplied 6 Speakers not supplied e Example 6 speakers For your reference e Change the settings in the Sound menus page 60 to suit the digital equipment you have connected Ifthe equipment can decode Dolby Digital set Dolby Digital to Bitstream factory setting If the equipment can decode DTS set DTS to Bitstream e The DTS decoder must be compatible with the signals recorded on DVD You can record the digital signal directly onto digital recording equipment The signals on DVDs will be converted to 48 kHz 16 bit linear PCM When recording DVDs ensure the following conditions are met e There is no copy guard recorded on the disc eThe recording equipment can handle a sampling frequency of 48 kHz 16 bit eYou cannot record MP3 If you want to use the synchro recording feature on your digital recording equipment and you use connection A or B to record from CDs or video CDs fi
120. rst pause at the point you want to record from activate the synchro feature then restart play on the unit 55 Connecting external equipments continued Connecting an analog amplifier or system component B 1 a gt D 3 0 R AUDIO L VIDEO SVIDEO Y 2000 le gt Bl f AUDIO 4 1 Audio cable a Red R b White L 2 Rear panel of this unit 3 To AUDIO OUT L R 4 Audio cable not supplied 5 6 Audio input L R 2 channel analog amplifier or system component not supplied MT o enjoy Dolby Pro Logic page 69 You will also need to connect center and surround speakers in addition to the front speakers to enjoy surround sound Read the instructions for the equipment for connection details Turn V S S off Dolby Pro Logic will not function correctly if V S S is on Connecting a Decoder Decoder here refers to the device used to decode scrambled broadcasts Pay TV 1 Decoder not supplied 2 21 pin Scart socket 3 21 pin Scart cable not supplied Connect a 21 pin Scart cable not supplied to the AV2 21 pin Scart socket on the unit and to the 21 pin Scart socket on the decoder Connect the decoder s mains lead to an AC mains socket Set AV2 Connection to DECODER page
121. s Enjoying more powerful sound Refer to the relevant pages for details Enjoying 5 1 channel Digital connection Page 55 SETUP Sound Pages 60 62 surround sound with Connect to an amplifier with A eSet PCM Down Conversion Dolby Digital and DTS built in decoders to On eSet Dolby Digital and DTS ee to suit the equipment Change speaker settings on the 5 amplifier To enjoy stereo or Analog connection Page 55 SETUP Sound Pages 60 62 Dolby Pro Logic Connect to an analog amplifier B e Set PCM Down Conversion or system component oO bs A Digital connection Page 55 SETUP Sound Pages 60 62 E Connect to a digital amplifier or A eSet PCM Down Conversion g system component OLONE e Set Dolby Digital to PCM eSet DTS to Off MOther uses Record to digital recording equipment or cassette deck A B page 55 Record from an video cassette recorder page 57 Use connection B to enjoy discs recorded with a sampling frequency of 96 kHz Sound will not be output if you use connection A and set PCM Down Conversion to Off due to copy protection Convert the signal to 48 kHz to enjoy this type of audio For your reference eThe equipment connections described are examples eBefore connection turn off all equipment and read the appropriate operating instructions Note You can enjoy Dolby Digital in ste
122. t to the TV aerial socket 4 Plug the TV DVD Recorder and Satellite Receiver into the mains as shown at top of the page 13 Connections with S Video cable Connections and preparations for a TV with S Video socket The conventional video sockets of DVD Recorder s output input a combination of the luminance signal Y and colour signal C which are recorded on the disc The S Separate Video socket allows separate transmission of signals in order to obtain clearer pictures The connection with S Video Cable can also be used for playback of any disc The S in the S Video socket stands for SEPARATED Y C not for S VHS RF Input socket Audio Video S Video Audio video TV with S Video Output socket Output socket Input socket Input socket not supplied Aerial not supplied Aerial Input AC Input socket RF lead supplied RF Output socket S Video cable not supplied S Video Input Audio Video cables socket supplied AC Mains lead supplied To AC Mains socket 14 Recording from Set Top Boxes STB or other Satellite Receivers SAT Wi Recording video signal by Sky personal Planner and External Link 1 Functions To record programmes from satellite receiver using Sky Personal Planner function together with the External Link1 function of this DVD Recorder eMake connections as shown
123. tereo or bilingual broadcasts recorded on DVD RAM eWhile playing something recorded from other equipment When using DVD R You cannot use AUDIO or the DISPLAY menu to change audio type when a DVD R is in the disc tray eWhile receiving a bilingual TV broadcast You can use the SETUP menus to select which audio type is recorded either M1 or M2 M1 is the default setting page 60 Sound Bilingual Audio Selection e During play The audio type selected for recording is played This is displayed as LR Marking places to play again MARKER RAM DVD R You can mark up to 999 points on a disc to return to later These marks are recorded directly onto DVD RAM but are cleared when you removed or finalized DVD R DVD V LCD 132 J MP3 You can mark up to 5 points on a disc to return to later All the markers are cleared when the disc tray is opened Preparation Switch DVD TV B to DVD Wi Marking positions directly During play Press MARKER eOne marker is added M Using DISPLAY menus to mark positions Displaying the marker icon 1 During play Pr ess DISPLAY ED Soundtrack i Subtitle OFF Picture 2 Use A V to select the Play tab and press gt Pi 3 Use A V EI to select Marker and press P Audio channel Repeat Pla OFF Marker ESO EEZZZZEEZE icture
124. them to PCM signals for 2 channel output Bitstream PCM DTS page 62 Choose whether to output DTS bitstream signals for decoding on other equipment or to not output signals at all Bitstream Off MPEG page 62 Choose whether to output MPEG bitstream signals for decoding on other equipment or to convert them to PCM signals for 2 channel output Bitstream PCM eUnderlined items are the factory presets Wi Display On Screen Messages Choose whether to show on screen messages automatically or not Automatic Off Grey Background Select whether to show the grey background normally shown when television reception is poor On Off Channel Guide On Off On The Channel Guide will appear for a few seconds each time the channel is changed with v a CH B Off The Channel Guide will not appear FL Display Changes the brightness of the unit s display Bright Dim Wi Connection TV Aspect page 19 Choose the setting to suit your television and preference Norm 4 3 Wide 16 9 TV System PAL NTSC PAL Select when connecting to a PAL or Multi system television Select to record television programmes and PAL input from other equipment NTSC Select when connecting to a NTSC television Select to record NTSC input from other equipment Television programmes cannot be recorded properly eTo change the TV system PAL NTSC setting While stop
125. tion eTurn on the television eSwitch DVD TV to TV 1 Turn on the TV and the unit Select video playback channel on the TV 2 Press VIDEO Plus VIDEO Plus Remain 0 59 SP 12 53 00 16 7 TUE Enter VIDEO Plus Number by using 0 9 keys 00 3 Enter a Video Plus Code from a Satellite TV Guide for a satellite channel e g Sky 1 using the numeric buttons E If you make a mistake use 4 ET to go back 4 Press ENTER D will appear instead of a channel number AV input 5 Use A Y lt gt ED to select the channel or AV input that is to be used for recording from the satellite channel 6 Press ENTER ED to memorise the setting The unit will now automatically set the programme position or AV input correctly when a VIDEO Plus recording is set for this satellite station in the future Remain 1 58 SP TIMER RECORDING 12 53 00 16 7 TUE Name Date Start 16 7TUE 1 00 Stop Mode PDC 2 00 SP OFF Press ENTER to store new programme SELEC CANCEL No ENTER Y RETURN OFO 7 Use A to select the programme that you have just set Now press CANCEL amp to delete it from the timer recording list It is no longer needed TIMER Remain 1 58 SP Hehe 1 19 00 16 7 TUE No Name Date Start Stop Mode POC di 01 BBCi 16 7TUE 1 19 1 22 SP OFF OK New Timer Programme SELECT 0D CANCEL ENTER peTuRN 8 Repeat steps 2 7 above until you have set and
126. to highlight the first asterisk X RAM DVD R 1 10 EEE KK k K Marking positions 1 Use lt gt ED to select an asterisk gt 2 Press ENTER D e One marker is added DVD V ma When marking positions 11 and above RAM DVD R 1 Use lt gt to highlight 1 10 2 Use A V to select 11 20 e You can select the next group of 10 when the current group is full 3 Use gt eThe first asterisk is highlighted 4 Press ENTER to mark a position To play from a marked position 1 Use lt gt EI to select a marker number 2 Press ENTER e Play starts from the marked position WiTo clear a marker Use gt to select a marker number and press CANCEL eAn asterisk replaces the number and the position is cleared To clear the DISPLAY menus Press DISPLAY EZ Playing discs continued Note RAM This feature doesn t work while using a play list Markers cannot be added to or removed from discs that are protected pages 38 72 RAM DVD R The markers are ordered by time This means that the marker numbers can change when you add and erase markers DVD V MP3 This feature only works if the elapsed playing time of the disc is shown on the unit s display Some subtitles recorded around the marker may fail to appear Using menus to pla
127. to select Exit and press ENTER EI 8 Use lt to select Erase and press ENTER ID ePlay lists created with the erased part are also erased ar EF N Partial erase Remaining Time 0 19 SP Corresponding PLAY LIST will also be erased m ENTER Y RETURN To stop partway through Select Cancel in step 8 and press ENTER ID Or Press RETURN To erase another part of the same programme Select Next in step 7 and perform step 8 then repeat steps 5 8 For your reference e Use search and slow motion to find the points eYou cannot specify an end point before a start point or a start point after an end point eYou may not be able to specify start and end points within 3 seconds of each other eYou cannot specify start and end points if the picture recorded is stilled The unit pauses play when the end of the programme is reached during this procedure eThe disc s available recording time may not increase after erasing short parts of programmes ePlay lists created with the erased part are also erased 44 Using the DIRECT NAVIGATOR continued Dividing programmes RAM You can divide a selected programme into two You must be sure you wish to divide a programme because once a programme has been divided it cannot be returned to its original form Preparation eSwitch DVD TV BY to DVD e Insert a disc you have
128. turdays eStart start time Stop finish time The time increases or decreases in 30 minute increments if you hold the button eMode Recording mode XP gt SP gt LP gt EP gt FR page 26 ePDC ON OFF page 33 e Title Select Title and press ENTER then refer to page 37 for entering title 4 Press ENTER ED when you have finished making changes eTo continue programming Repeat steps 2 3 and 4 5 Press PROG CHECK or RETURN E Timer recording continued To put the unit on recording standby Press O TIMER B Ensure lights on the unit s display To change the timer recording programme 1 While the Timer Programme List Screen is being shown use A Y to select the programme you want to change and press ENTER I to show the Timer Programme Correction screen eYou may also select programme by inputting a 2 digit number using the numeric buttons E eUse lt gt Gp to move to the page preceding or following the one on display 2 Move through the items with gt and change the settings with A V DD and press ENTER ED Note eThe built in clock employs 24 hour system eThe remaining time is not shown if you insert discs other than DVD RAM or DVD R e The remaining time displayed is calculated based on the current recording mode elf the disc is protected pages 38 72 the unit switches to standby but does not go on standby for recording Check t
129. unit or disc elf a disc is loaded the unit will come on and play will start when you press gt ED elf you play a disc that includes parts without video the unit may display the video from the disc you were playing immediately before that disc e RAM DVD R Play starts from the beginning of the most recent recording If hat programme is extremely short play starts from the next most recent recording Use TOP PLAY in the FUNCTIONS window page 30 to start play from the oldest programme on he disc programme 1 Erasing a programme that is being played RAM DVD R 1 During play Press ERASE ED Erase Programme Remaining Time 0 58SP Corresponding PLAY LIST will also be erased Erase Cancel bei SELECT lt n ENTER gt e RETURN eo 2 ME SELECT ENTER eThe menu disappear about 10 seconas later 2 Use lt 4 or 44 4 ES to select Erase and press ENTER or ERASE ED eA confirmation message will be displayed eUse gt or gt gt gt gt CEP to select Cancel and press ENTER or ERASE EM or press RETURN ED to cancel Note elt is not possible to erase a programme when you are carrying out simultaneous recording and play page 29 elt is not possible to erase a programme that is in the process of being recorded eThe available recording time on DVD R does not increase when you erase programmes Starting play from where you stoppe
130. uring fast forward rewind of VBR recorded MP3 the counter may not display correctly eThis unit is compatible with multi session but if there are a lot of sessions it takes more time for play to start Keep the number of sessions to a minimum to avoid this elf you play a MP3 track that includes still picture data it will take some time before the music itself starts playing and the elapsed time will not be displayed during this time Even after the track starts the correct play time will not be displayed eMaximum number of tracks and groups recognizable 999 tracks and 99 groups eCompatible compression rate between 32 kbps and 320 kbps 25 Playing discs continued MNaming folders and files At the time of recording give folder and file names a 3 digit numeric prefix in the order you want them to play this may not work at times Folder Group Track total Total e L 007 mp3 008 mp3 009 mp3 010 mp3 Discs must conform to ISO9660 level 1 or 2 and Joliet except for extended formats e MP3 files must have the extension MP3 or mp3 e This unit is not compatible with ID3 tags e English alphabets and a Arabic numerals are indicated properly Other characters may not be indicated properly W Using the tree screen to find a group 1 During stop or play Press gt ED while a track is highlighted to display the tree screen Selected Group MW Number Total Group Number 00
131. with an aspect ratio of 16 9 This means you can view most material with the intended aspect ratio on a widescreen television Material with this ratio will not fit onto a standard television with an aspect ratio of 4 3 Two styles of picture Pan amp Scan and Letterbox deal with this problem Pan amp Scan The sides are cut off so the picture fills the screen Letterbox Black bands appear at the top and bottom of the picture so the picture itself appears in an aspect ratio of 16 9 Playback control PBC This is a method of playing Video CDs You can select parts to play by using menus recorded on the disc PLAY LIST This is a collection of scenes lt enables you to play these scenes in succession or to select specific ones to play Programme PRG The section between the point where recording is started and the point where it is stopped Sampling frequency This is the number of samples of sound taken per second during conversion to a digital signal A high sampling frequency results in a sound close to the original when played back S video output The colour and luminance signals are separated before being sent to the television making for greater picture clarity RGB Output RGB means separate Red Green Blue colour signals PAL only If you connect a TV equipped with RGB input capability to the AV1 socket on this unit and a decoder equipped with RGB output capability to the AV2 socket the TV can
132. wnerlD aus sen nase SHIPPING CONGILION vita cee did ee etna Status displays sitnine eaaeo ae aeaeaie aeda Changing the information displayed eenee 67 Display examples dora sarna 67 Maintenance and Handling ccconcccnconccnnnencnnnnnccnananonanannnnnannos 68 Maintenances cuidadas 68 DISC handling ini id id 68 Keep this page open as you read through the Operating Instructions Refer to it for the control and component names and numbers which appear in the text The illustration shows DVD R4000EB for the United Kingdom CHANNEL Y oq SED WY VIDEO _ MONO AUDIO MIR 0000 ERASE TIMER RECE RETURN FUNCTIONS EXT LINK TIME SUP REC VIDEO Plus AV DIRECT TVREC 16 Hold both sides of the remote control s cover to open it You can also open it by pressing on the center of it and sliding it down F Rec EC MODE FRAME gt 32 8 INPUT SELECT STATUS O O 29 B 34 RA FUNCTIONS RETURN 12 PROGCHEOR TIMER MAULSG TNESIP 24 ED CHEB Control reference guide Remote control Page DVD on off button DVD o ococcoccococococoo o 17 e To switch the unit from on to standby mode or vice versa In the standby mode the unit is still connected to the mains e n standby mode the unit is still consuming a small amount of power VIDEO Plus button VIDEO
133. y MP3 discs MP3 This unit can play MP3 files recorded on CD R RW with a computer Files are treated as tracks and folders are treated as groups Total means total number of all MP3 files all tracks in all groups recorded in the disc Preparation Switch DVD TV BY to DVD 1 During stop or play Press TOP MENU or MENU amp 9 e The file list appears G Selected Group No and Name The Group Number TE Track Number in the Group eee MP3 MUSIC 1 001 Both Ends Freezing TOTAL Selected Track Number 920 Total Track Number 4 Back Next 2 Press A V to select the track and press ENTER Play continues to the last track in the last group e CP indicates the track currently playing e You can also select the track with the numeric buttons EN directly e g The track 006 mp3 of Group 002 of the illustration on top right 8 0 gt 0 6 The track 010 mp3 of Group 003 of the illustration on top right 10 0 1 0 To show other pages Press A V lt gt D to select lt Back or Next gt and press ENTER e After listing all the tracks in one group the list for the next group appears MITO exit the file list Press TOP MENU MENU EP or RETURN E Note eThe order in which menu appears on menu display may differ from the order on computer display eSometimes d
134. y using automatic tuning eA channel that should have been set wasn t eA channel s reception is poor and you want to delete it Preparation eSwitch DVD TV to DVD ePress FUNCTIONS to show the FUNCTIONS window 1 Use A V lt gt to select SETUP and press ENTER D eThe SETUP screen appears 2 Use A V to select the Tuning tab and press 4 or gt 3 Use A V ED to select Manual and press ENTER D SETUP Manua Auto Setup Restart Con 1 oa 4 Use 4 V gt to select the desired TV station and use the A B C buttons ED EN EN to select Delete Add Move Manual Tuning S 3 z 1 2 3 4 5 6 z 8 9 0 El Follow the operations below To delete a programme position Delete Press A EN To insert a blank programme position Ada Press B EN To move a TV station to another programme position Move Press C EB and then use A V to select the new programme position to which you want to assign the TV station Press ENTER 5 Press RETURN ES Note eSetting can take up to 3 minutes approximately elf downloading of the setup data has been performed only the instruction indication Delete appears Hint elf you have performed Manual Tuning to enter TV stations the indication may appear under Pos Name on the display when
135. you can change the Name House No and Postcode Owner ID ET RETURN leave 5 Press ENTER to conclude the setting 6 Use aA Y lt 4 gt and ENTER I to select and change the desired information 7 Press RETURN to exit the Owner ID setting menu HETo Display the Owner ID setting menu While stopped Hold down W on the main unit for more than 5 seconds e The PIN number is not displayed e After 30 seconds this menu automatically disappears 66 Changing the unit s settings continued Shipping Condition The all settings in the SETUP screen return to the factory settings except for the ratings level and the password and owner ID settings Preparation e Switch DVD TV BY to DVD ePress FUNCTIONS to show the FUNCTIONS window 1 Use A Y lt gt UD to select SETUP and press ENTER D eThe SETUP screen appears 2 Use A V to select the Settings tab and press lt 4 or gt ED 3 Use A V to select Shipping Condition and press ENTER Shipping Condition ee Warning all stored tuning data will be lost Do you want to proceed Yes no 4 Use gt to select Yes and press ENTER 5 Use lt gt EI to select Yes and press ENTER Status displays Changing the information displayed Displays appear on the television when you operate the unit to let you know what operation was

Download Pdf Manuals

image

Related Search

Related Contents

Information  IBM 510Cs Laptop User Manual  Tiptel Ergophone 6060 2" 109g Black  Manual - Cocodati  HERMA Coloured Labels A4 105x148 mm red paper matt 400 pcs.  USEr MANUAL  Samsung 19"-os LED monitor éles képminőséggel Felhasználói kézikönyv  Manuel de l`utilisateur  Samsung L700 Manual de Usuario  Télécharger le Catalogue Environnement  

Copyright © All rights reserved.
Failed to retrieve file