Home

Samsung NP-RF510E User Manual (XP/Vista/Windows7)

1. Samsung Recovery Solution wax a Samsung ra Recovery Solution System Software Backup This function enables backing up of the system software to another storage device oftwe 2 ano 5 ge device Hf a device or Samsung application does not work properly it can be reinstalled using the backup DVD of the system software Description Samsung System Software Ja gt c Save Path D Local Disk 425 7GB Available v D Local Disk 425 7GB Available E BD RE Drive fse ne Select Drive D Select the DVD drive Chapter 4 Backup Restore E If you have specified a hard disk drive or a removable disk as the Save Path the SamsungSoftware folder is created on the corresponding drive e g D and the system software programs are saved to that folder Take care to not delete the folder 3 If you click the Next button the Software Backup begins If you have selected the DVD drive as the Save Path the Insert a blank DVD message appears Insert a blank DVD and click the OK button 4 After the backup the System Software Backup is completed message appears 4 e If you want to install the System Software Programs backed up on the drive run the SoftwareMediaXxX exe file in the SystemSoftware folder e When installing System Software Programs from the backed up DVD insert the DVD and follow the System Software Installation directions To delete Samsung Recovery Solution r
2. This is the cable connecting a general CRT monitor and the computer Analog video is output through this cable Glossary DVD Digital Versatile Disk DVD was developed to replace CD compact disk Although the shape and size of the disc are the same as that of a CD the capacity of a DVD is at least 4 7GB while the capacity of a CD is 600MB DVD video is digital unlike VHS analog video and supports MPEG2 compression and digital audio To play a DVD a DVD drive is required Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure HDMI This is a digital video audio interface specification that transmits video and audio signals over a single cable Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off When canceling Hibernation Mode all application programs that were running are restored to their last state Chapter 5 Appendix Icon This refers to a small image that represents a file that users can use IEEE802 XX This is a set fo specifications developed by the 802 committee of IEEE for the LAN connection method called XX LAN Local Area Network A communications network connecting computers printers and other devices within a local area such as within a building A LAN enables all connected devices to interact with other devices on the network The current LA
3. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network i This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part The Part 15 radio device operates on a non interference basis with other devices operating at this frequency Any changes or modification to said product not expressly approved by Intel could void the user s authority to operate this device 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Regulatory Compliance Statements If necessary the user
4. Samsung Recovery Solution Optional Samsung Recovery Solution is a program that enables restoring or backing up the hard disk drive for when a problem occurs with the computer If the computer fails to boot up you can restore the computer by pressing the Fee key in the booting screen Samsung Recovery Solution may not be provided or the version may differ depending on the model In addition some functions may not be provided or may differ depending on the version For more information on using Samsung Recovery Solution please refer to the online help of the program The screen images in this document may differ from actual product If your computer does not have an internal ODD you need an external ODD connected to your computer to use the Backup Function or Restore Function using DVDs The System Software function may not be provided depending on the program version Chapter 4 Backup Restore Samsung Recovery Solution Functions Backup Restore Functions e Complete Backup Backs up drive C A problem occurs Backup Function Backs up drive C or required folders and files Data Backup Backs up important folders and files Restore Function Restores major Windows files drive C or folders and files to the previous state Basic Restore Restores only major Windows files in a short time Complete Restore Restores drive C to the previous normal state Data Restore
5. Click Start gt Control Panel gt Network and Internet Connections gt Network Connection Wired Network 3 Select Local Area Connection and click the right button of the touch pad and select Properties JIQ E Network and Internet Network Connections gt X File Edit View Tools Advanced Help Mi Organize v GE Views v Disable this network device fy Diagnose this connec Name Status Device Name Connectivity Network Category Owi LAN or High Speed Internet 1 k Local Area Connection Network cable unplugged Disable Status Diagnose Bridge Connections Create Shortcut Delete Rename The LAN Device name may differ depending on your computer s Network Device gt For Windows 7 Vista Select Internet Protocol Version 4 TCP IPv4 from the list of Network Components and click Properties Chapter 2 Using the computer ji Local Area Connection Properties x Connect using BP COOOK This connection uses the following items Ww oO E Client for Microsoft Networks iv laos Packet Scheduler J File and Printer Sharing for Microsoft Networks ai ntemet Protocol Version 6 TCP IP v6 S Intemet Protocol Version 4 TCPY Pw4 wi Link Layer Topology Discovery Mapper I 70 Driver wi ink Layer Topology Discovery Responder Description Transmission Control Protocol Intemet Protocol The default communication wide area network protocol
6. DDR SDRAM Double Data Rate Synchronous Dynamic Random Access Memory DRAM is amemory type whose cells consist of a capacitor and transistor manufactured at a low price SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays This computer uses DDR SDRAM Device Manager An administrative tool used to manage computer devices You can add or remove hardware or update a device driver using the Device Manager DHCP Dynamic Host Configuration Protocol This refers to automatically allocating IP addresses to the users on the network by the network administrators Direct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed Since the operating speed of graphics memory and sound cards must be very fast to provide high quality video and sound for games Direct X enables faster control and interaction between applications and hardware devices By using Direct X the multimedia performance of Windows has been hugely improved Driver Software that interacts between the hardware and the operating system An operating system knows the hardware information and controls the hardware In general a driver is supplied with the corresponding hardware device D sub D subminiature
7. Samsunga User Guide Getting Started Using the Computer Settings and Upgrade Backup Restore Appendix EJ Contents Contents Chapter 3 Settings and Upgrade Product Features Tips Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2 Using the Computer 36 41 48 49 52 60 61 65 69 74 80 Keyboard Touchpad CD Drive ODD Optional Multi Card Slot Optional Connecting an External Display Device Connecting an External Digital Device Adjusting the Volume Wired Network Wireless Network Optional Sharing Content in a Home Network Easy Content Share Optional Using 3D for 3D models only 88 90 92 95 96 98 100 107 LCD Brightness Control BIOS Setup Setting a Boot Password Changing the Boot Priority Upgrading Memory Adding a Hard Drive optional 17 3 models only Battery Using the Security Slot Chapter 4 Backup Restore 109 Samsung Recovery Solution Optional Chapter 5 Appendix 122 124 126 140 141 143 147 Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Product Specifications Glossary Index Proper Posture During Computer Use Overview Turning the Computer On and Off Product Features Optimized Performance and Usability e NVIDIA Optimus techno
8. Select a Restore time and cick the Nes button When backing up to another drive Proceed to Step 2 i ese n progres If the power is tur ie oft den ing a Restore you have to ieee Restor chines e beginning E 2 When the Samsung Recovery Solution start screen appears click Restore and then click Complete Restore 4 The restoration progress message appears after the computer boots up in restoration mode If you click OK the restoration begins If multiple DVDs have been used for a Complete Backup whenever burning a DVD is completed the Insert the next DVD message will appear When the Restart the System message appears after the restoration is complete click OK to restart the system The Complete Restore has been completed Backup Restore Samsung Recovery Solution Optional gt Restor Q Data Backup Restore naa Slatin o mz Recovery Solution The Data Backup function enables you to backup specific files and folders to another drive DVD or removable storage device Data Restore enables you to restore data using the data saved by a Data Backup when data is lost This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD Data Backup 1 When the Samsung Recovery Solution start screen appears Select Drive D Select the DVD drive click Backup and then click Data Backup E If you have spec
9. There is a danger of electric shock or choking Use an authorized battery and AC adapter only Please use an authorized battery and adapter approved by Samsung Electronics Unauthorized batteries and adapters may not meet the proper safety requirements and may cause problems or malfunctions and result in an explosion or fire Chapter 1 Getting Started Do not use the computer in a badly ventilated location such as on bedding ona pillow or cushion etc and do not use it in a location such as room with floor heating as it may cause the computer to overheat Take care that the computer vents on the side or the bottom are not blocked especially in these environments If the vents are blocked the computer may overheat and it may cause a computer problem or even an explosion Do not use the computer in a humid location such as a bathroom or sauna Please use the computer within the recommended temperature and humidity range 10 35 C 20 80 RH Do not close the LCD panel and put the computer into your bag to move it when it is still turned on If you put the computer into your bag without turning it off the computer may overheat and there is a danger of fire Shut the computer down properly before moving it Safety Precautions Getting Started A ATNING Usage Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality Disconne
10. Digital Video Audio Port HDMI Optional USB Port e or Chargeable USB Port gt 4 Optional Microphone Jack Headphone Jack Chapter 1 Getting Started A jack to connect the AC adapter that supplies power to the computer A port used to connect a monitor TV or projector supporting a 15pin D SUB interface Connect the Ethernet cable to this port You can connect an HDMI cable to this port Using this port you can enjoy digital video and audio on the TV USB ports to which you can connect USB devices as well as a Chargeable USB port are provided Using a Chargeable USB port you can access or charge a USB device Ze The port can be distinguished by the figure e amp or e 4 printed on the port of the product A jack used to connect the microphone A jack used to connect the headphones Chapter 1 Ove rvi ew Getting Started gt For 14 15 6 inch models gt For 17 3 inch models This is a Lithium lon rechargeable battery that USB 3 0 Blue Port You can connect USB devices to the USB 1 Battery supplies power to the computer 1 or USB 2 0 Black port such as a keyboard mouse digital Port amp Optional camera etc The internal heat of the computer is emitted through these holes 2 Battery This is a Lithium lon rechargeable battery 2 Fan Vents E If the vents are blocked the computer that supplies power to the computer may overheat The internal heat of the computer is Avoid b
11. Disconnect or connect to another network Show All Mie pscomisr H lt Security enabled network ule SamsungWLAN Unsecured network x COM AV RG2000 GO0 Security enabled network Set up a connection or network Open Network and Sharing Center When Connected to the AP is displayed click the Close button You can access the network Wireless Network Optional PEE Q gt For Windows XP 3 Once Connected to AP is displayed you can use a wireless network 1 Click the Wireless Network Connection icon from the Taskbar using the right button of the touch pad Then click View Available Wireless Networks Change Windows Firewall settings Open Network Connections Repair View Available Wireless Networks 2 Select an AP to be connected and click Connect If a network key is set in the AP the network key input window will appear Enter the network key in the input window and click OK i Wireless Network Connection Network Taai Choose a wireless network Refresh network list Click an item in the list below to connect to a wireless network in range or to get more ion information 2 Set up a wireless network e SAMSUNG for a home or small office Related Tasks i Learn about wireless networking fe Change the order of SOL39 RG1000 64 preferred networks a Gp Change advanced Security enabled wireless network settings zZ For a network key contact the network administrator
12. EA e If you don t want fan noise turning ON and OFF in the Silent mode select the Advanced menu gt Fan Silent Mode gt Low in the BIOS Setup The fan keeps turning ON and works in Low noise mode e You can only use this function when the Easy SpeedUp Manager program is installed TypeB piece Controls the brightness of the keyboard backlight F8 Brightness Control Keyboard Fn Wireless network Touchpad Num Lock Optional Scroll Lock Chapter 2 Using the computer Function Turns on or off wireless network device in a model equipped with wireless network device Turns the Touchpad function on or off When using an external mouse only you can turn the Touchpad off Turns the numeric keyboard on or off For 14 inch models For 15 6 17 3 inch models once the Num Lock is on the numeric keypad in the right side of the keyboard is enabled If you turn the Scroll Lock on you can scroll the screen up or down without changing the cursor location in some applications Keyboard Screen Brightness Control oi E Volume Control B le Alternatively press the Fe a key combination to turn the volume on or off Numeric Key For 15 6 17 3 inch models If you press the Num Lock key you can use the numeric keys Chapter 2 Using the computer Performs the right click mouse function touchpad Other Function Keys When the shortcut key function does not work
13. Fee key during the booting sequence This is the program that backs up the current state of the computer and restores Windows when a problem occurs with the computer Restores the entire Windows drive to the initial or backup status of the computer i Since a Complete Restore deletes all user data as well as additionally installed programs please backup your important data first using the Data Backup function before running Complete Restore us o All current data on Windows drive is removed and the data will be restored at the time selected below You may need to reinstall some Win software after the Restore gt Select a Restore time and click the Next button Advanced 04 29 201 Computer Initial Status 07 30 HDD 1 Caution Make sure to connect the power while the Restore is in progress If the power is turned off during a Restore you have to restart the Restore from the beginning 4 The computer boots up into restoration mode and the restoration progress message appears If you click OK the restoration begins The restoration may take some time please wait for a moment ai ala 5 Run Complete Restore if the computer does not work even after Basic Restore has been completed 5 When the Restart the System message appears after the restoration is complete click OK to restart the system D Make sure that the power cord is connected while the restoration is in process
14. Restores important files or folders to the previously backed up state Samsung Recovery Solution Optional System Software Functions Samsung Recovery Solution provides system software so that you can reinstall or copy the device drivers and system software necessary for normal operations onto a separate storage device Restore Function Not only can you use Samsung Recovery Solution when Windows is running but also when you are unable to boot up into Windows Let s learn how to use Samsung Recovery Solution Optional functions such as Initial State Image Initial Status Backup and Partitioning are only available in some models If the image of the initial state is saved on a DVD or removable storage device connect the DVD drive or removable storage device to the computer before using the function Partition Setup amp Initial Status Backup If you turn your computer on for the first time the Initial Status Backup function is performed after registering Windows This function saves an image of the Initial Status of the C drive to a secure location so that users can restore the computer to the Initial Status using the Complete Restore function An Initial Status Backup is only performed once immediately after the computer is purchased Chapter 4 Backup Restore 1 If you turn the power on for the first time the Register Windows screen appears If you register Windows according to the instructions on the screen the com
15. Wireless Network Optional Connecting to a wireless network through Wi Fi Manager Optional zZ These descriptions are for Windows 7 and for supported models only You can access a wireless network using Wi Fi Manager 1 Press the Fn Fy key combination Then the Wi Fi Manager window appears Select Wi Fi and check if it is set to ON If this option is set to ON the Wi Fi function will run Wi Fi Connection Status ON Green OFF Grey xf FF airportthru gt ureadymobile een AP List setup Chapter 2 Using the computer Normal Wireless Network Status If the wireless LAN icon is displayed in the system tray of the Taskbar it indicates that the computer is connected to the Internet properly see below Windows 7 Windows Vista Windows XP Wireless Network Optional Abnormal Wireless Network Status When the wireless LAN is not connected If the wireless LAN icon is displayed with an X in the system tray of the Taskbar it indicates that the wireless LAN device is turned off or that there are no available APs Or the wireless LAN is disconnected Windows 7 Windows Vista Windows XP If the wireless LAN is turned off press the Fy key combination to turn it on When you are not connected to the Internet This is indicated by the wireless LAN icon in the system tray of the Taskbar In this case you have to check the IP address settings P
16. gt When using the Elan driver gt When using the Sysnaptics driver Click Start gt Control Panel gt Hardware and Sound gt Mouse gt Device Settings gt Settings gt Pointing gt Sensitivity gt PalmCheck and then adjust the sensitivity When the touchpad pointer does not move smoothly Slide the bar appropriately in the direction of Minimum Minm taxman l I I When the touchpad pointer moves unintentionally excessively Slide the bar appropriately in the direction of Maximum Touchpad Touchpad On Off Function Locking with shortcut keys If you want to use the mouse only without using the touchpad you can turn the touchpad off To lock the touchpad function press the Frog keys 5 You can set the touchpad and touchpad button settings in the tabs that appear when clicking Start gt Control Panel gt Hardware and Sound gt Mouse Chapter 2 Using the computer Auto locking when connecting USB mouse gt When using the Elan driver Click Start gt Control Panel gt Hardware and Sound gt Mouse gt ELAN and check the Disable When external USB mouse plug in option This will turn the touchpad off when a USB mouse is connected gt When using the Sysnaptics driver Click Start gt Control Panel gt Hardware and Sound gt Mouse gt Device Settings and check the Disable internal pointing device when external USB pointing device is attached in option This will turn the
17. o key The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the a key once Chapter 3 88 Settings and Upgrade e Maintaining the changed LCD brightness even after turning the computer on again To maintain the LCD brightness set by using the brightness control keys or through the Power Options follow the procedures below gt For Windows 7 Vista 1 Click Control Panel gt Hardware and Sound gt Power Options 2 Click Change the settings of the currently configured mode 3 Adjust the display brightness adjustment menu bar and click the Save the changes button Saving battery power consumption Decreases the LCD brightness when the computer is running on battery power to save battery power consumption LCD Brightness Control Ze e LCD bad pixels principle of computer f Samsung observes the specifications regarding strict quality and reliability of LCD But in spite of that it is inevitable that there might be a small number of bad pixels A large number of bad pixels can cause problems in appearance but a small number of pixels doesn t affect the computer performance Therefore Samsung observes and manages the following dot principles Bright dot 2 or less Black dot 4 or less Combination of Bright and Dark 4 or less E Instructions for Cleaning the LCD Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent m
18. Enter gt on the password to be deactivated For example to deactivate a supervisor password in the Set Supervisor Password item press lt Enter gt In the Enter Current Password item enter the currently configured password and press lt Enter gt Leave the Enter New Password item field empty and press lt Enter gt Leave the Confirm New Password field empty and press lt Enter gt The password is deactivated For some models the password is only canceled if the lt Enter gt key is pressed in the Setup Notice window Chapter 3 Settings and Upgrade Changing the Boot Priority Saltese apm By default the highest boot priority device is set to the CD ROM 3 Press the down key to move to the AHCI HDD item and DVD drive As an example the procedures to change the highest press the F6 key to move up to the top item boot priority device to the hard disk drive are described below Boot Device Priority Boot priority order A D N A e The screen images and terms may differ from actual product depending on the computer model and driver version USB KEY N A USB CD gt XXXXXXXXXXXXXX USB FDD N A USB HDD N A PCI BEV N A 1 Select the Boot menu in the BIOS Setup Excluded from boot order IDE HDD N A IDE CD N A e EE PCI SCSI N A 2 Press lt Enter gt on the Boot Device Priority item _ USB ZIP N A USB LS120 N A P Boot Device Prioriy 4
19. Fasten the case screws into the secondary hard drive bay Case Screws Connector 5 If a connector remains unconnected insert the connector with the white dot facing up into the socket I Attach the hard drive bay cover and fasten the screws 5 Once you have installed a secondary hard drive format it in accordance with the instructions in the user manual of the hard drive before use Chapter 3 Batte ry Settings and Upgrade Please refer to the following instructions when running the computer on battery power without connecting the AC power Charging the Battery A Lithium lon smart battery is supplied with this computer l 1 Attach the battery and connect the AC adapter to the DC in jack of the computer i Carefully read and follow the precautions printed on the The battery will then start charging j battery before using the battery e Before using your computer for the first time after purchasing it charge the battery completely e The images used for the illustration are of a representative model therefore the images may differ from the the actual a product wN E Precautions eae e Use only chargers specified in the User Manual Wh harging i lete the Ch LED t e Never heat the battery pack put it near or in a fire or use at 2 SON CELA EN E el urns green a temperature higher than 60 C as this may cause fire e Never cause a short circuit between the battery pack St
20. NVIDIA graphics cards zZ This function is not provided in the Optimus specifications 1 2 Right click over the Desktop and select NVIDIA Control Panel Vertical Horizontal In the Select a Task window in the left panel select the sadist Dispaly gt Adjust Desktop Size and Positon item and then click Resize Desktop Resize Bar File Edit View Profiles Display Help Q Back v Advanced Settings v pee ge 3D settings inSet PhysX configuration Y H Change resolution Adj sktop You can adjust the desktop size and position for your analog display or TV change the flat panel scaling for your digital display o1 1 Select the display you would like to change d position ee a E i Set up digital audio CEEA r LSet up multiple displays E Video Adjust video color settings djust video image setting 2 When the desktop is displayed on my HDTV To adjust the size of your desktop dick the Resize Desktop button Select the desktop resizing mode reported to the display Connecting an External Display Device gt For AMD graphics cards 1 Right click on the Desktop and select Graphics Properties gt Desktops and Displays gt My Digital Flat Panels gt Scaling Options Digital Flat Panel Adjust the size to the edges of the TV screen using the resize bar and click Apply Chapter 2 Using the computer Catalyst Control Center
21. Preferences Desktops and Displays My Digital Flar Panels Scaling Options Digital Flat Panel Scaling Options Digital Flat Panel Adjust the edges of your display area to better fit your digital flat panel Scaling Options Use the scaling values instead of the customized settings when the desktop resolution does not match your DFP resolution Chapter 2 Connecting an External Display Device Using the computer Setting up HDMI TV audio Optional You can configure the sound of the computer to be played through the HDMI TV g OOK SAX High Definition Audio Device Ets Default Device You have to configure the sound device in the Control Panel n Realtek High Definition Audia whenever you connect the HDMI TV in order to hear sound from J Ready the computer on the TV 5 The screen images and terms may differ from actual product depending on the computer model Configure 1 Right click over the Volume Control icon in the notification area at the bottom right of the Desktop and select Playback Devices Alternatively click the Control Panel gt Hardware and 5 HDMI Output Device may not appear on the playback device Sound gt Sound list depending on the computer model In this case turn on the TV connect the TV to the computer 2 Change the setting to Digital Audio HDMI HDMI Device or using a HDMI cable and then switch to HDMI or LCD HDMI Digital Output Device click Set Default and click O
22. Proper Posture During Computer Use Getting started Volume Control Headphones and Speakers Check your volume first to listen to music rT VOLUME Check your volume e Check if the volume is too loud before using headphones e Itis not recommended using headphones for long periods of time e Any deviation from the equalizer default setting could cause hearing impairment e The default setting can be changed through software and driver updates without your intervention Please check the equalizer default setting before first usage Use Time Break Time e Take a break for 10 minutes or more after a 50 minute period when working for more than one hour Illumination e Do not use the computer in dark locations The illumination level for computer use must be as bright so for reading a book e Indirect illumination is recommended Use a curtain to prevent reflection on the LCD screen Operation Condition e Donot use the computer in hot and humid locations e Use the computer within the allowed temperature and humidity range specified in the User Guide Getting Started 1 Camera Optional Using this camera you can take still pictures and record video Overview Chapter 1 Ze e The pictures used for the cover and the main body in the User Manual are those of the representative model of each 2 Mute Button x Press this button mute the sound or series Therefore the colors and appearance of t
23. RW formats e If the Livelmaging option has been selected the Complete Backup operation begins without the computer being restarted 5 Continue with the Complete Backup operation by following the instructions Samsung Recovery Solution a Samsung r Recovery Solution Complete Backup Complete Backup in progress gt The required time is determined by the amount of data to be backed up Please wait until the backup ts completed Complete Backup in progress Speed 19 1MB sec Copied 6092 6092MB Elapsed 05 19 20 36 Caution Make sure to connect the power while the backup is performed If the power is turned off during a backup you have to restart the backup from the beginning Samsung Recovery Solution Optional packup Restore Complete Restore Select a Complete Backup restoration point in the restoration point selection screen and click the Next button The system is restarted 7 When backing up onto DVD Turn the computer on and insert the backup DVD into the E Samsung Recovery Solution x DVD drive C Recovery Solution Complete Restore If there are multiple backup DVDs insert the first DVD This tthe program that backs up the curent ante o the computer aad reaa M When backing up to a removable storage device Al cen ta on Windows ve resist eda ie pAs will be estored pre time selected below You may need to reinstall some Connect the removable storage device
24. Setup 3 4 Chapter 3 Settings and Upgrade Move to the Boot gt Smart Battery Calibration item using the direction keys and press lt Enter gt NumLock Off TouchPadMouse Enabled InternalLAN Enabled PXE OPROM Disabled Smart Battery Calibration Highlight Yes in the Battery Calibration Confirmation window and press lt Enter gt The Battery Calibration function is activated and the battery is forcefully discharged To stop the operation press the lt Esc gt button This operation requires 3 5 hours depending on the battery capacity and the remaining battery charge Battery Installing Removing the Battery 1 Shutdown the system close the LCD panel and place the computer upside down on a flat surface 2 Pull the two battery latches outwards cf then remove the battery 3 To install the battery again slide the battery into the system The battery latches move inwards and fix the battery automatically gg Check if the battery latch has been moved inwards Chapter 3 Settings and Upgrade Using the Security Slot You can secure the computer by connecting a lock and cable to the Security Slot To use this feature you have to purchase the lock and cable additionally To use the lock and cable refer to the product manual Tie the lock and cable to a fixed object and install the other end of the cable to the security slot Chapter 3 Settings and Upgrade
25. Solution Chapter 1 Getting Started Safety Precaution Notations Icon Notation A Warning Caution Description Failure to follow instructions marked with this symbol may cause personal injury and or fatality Failure to follow instructions marked with this symbol may cause slight injury to yourself or damage your property Text Notations Icon Notation Caution Note Description Content included in this section includes information required about the function Content included in this section includes helpful information to use the function Before You Start Copyright 2011 Samsung Electronics Co Ltd Samsung Electronics Co Ltd owns the copyright of this manual No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical without the consent of Samsung Electronics Co Ltd The information in this document is subject to change without notice due to improving the performance of the product Samsung Electronics shall not be liable for any data loss Please take care to avoid losing any important data and backup your data to prevent any such data loss Precautions for Operating System Support If a problem occurs because of the reinstallation of other operating systems OS or a previous version of a OS pre installed on this computer or a software that does not support the OS the company will not provide technical s
26. aa asy drive Safety Precautions Using the power supply in an airplane Since the power outlet type differs depending on the type of airplane connect the power appropriately When using the AC power plug Connect the power plug pins perpendicular into the center of the power outlet e Ifthe plug pins are not inserted into the center of the holes the plug pins are only inserted up to half their length In this case reconnect the power plug e You have to insert the power plug into the outlet when the power indicator LED of the power outlet is lit green If the power is connected properly the power indicator LED remains green Otherwise the power indicator LED is turned off In this case unplug the power check if the power indicator LED is green and then reconnect the power plug Power Indicator LED 220V Power Plug 110V Power Plug Good Example O Wrong Example X Chapter 1 Getting Started When using the auto adapter When the cigar socket is provided you have to use the auto adapter optional Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer Auto Adapter gt DC Plug Cigar Plug In flight Cigar Socket When using the Airplane Charging Converter Depending on the airplane you have to use the auto adapter and charging converter Connect the airplane charging converter optional to
27. any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Use in specific environments The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments The use of wireless devices on airplanes is governed by the Federal Aviation Administration FAA The use of wireless devices in hospitals is restricted to the limits set forth by each hospital Ea Explosive Device Proximity Warning Do not operate a portable transmitter such as a wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use Regulatory Compliance Statements E Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio frequency wireless devices because their signals could interfere with critical aircraft instruments Chapter 5 Appendix This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Unintentional Emitter per FCC Part 15
28. before using it Formatting a card deletes all data saved on the card If the card includes data backup the data before formatting it 1 Click Start gt Computer 2 Right click over a card drive with the touchpad and select Format 3 Click Start to the formatting Chapter 2 Using the computer To use a card to exchange data with a digital device such as a digital camera formatting the data using the digital device is recommended When you try to use a card which is formatted in the computer in another digital device you may have to format the card again in the device You cannot format write or delete data from a SD or SDHC card with a write protection tab when it is in the Lock position Inserting and removing a memory card repeatedly may damage the memory card Chapter 2 Connecting an External Display Device Using the computer Q If you connect an external display device such as a monitor TV About the connection cabia projector etc you can view the picture on the wider screen of the external device when you give a presentation or watch a video or Users should additionally purchase the necessary connection movie cables The computer provides an analog monitor port RGB and a digital video audio port HDMI The visual quality is sharper when a display device is connected through the HDMI port rather than the analog monitor port RGB port Therefore when multiple ports are supported connec
29. carefully Ze Since this is commonly applied to Samsung Computers some pictures may differ from actual products A warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Installation Related Do not install the product in places exposed to humidity such as a bathrooms There is a danger of electric shock Use the product within the operating conditions specified in the Manufacturers User Guide Keep the plastic bags out of the reach of children There is a danger of suffocation Chapter 1 Getting Started Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them This may increase the internal temperature of the computer and may cause an injury Do not install the computer on a slant ora place prone to vibrations or avoid using the computer in that location for a long time This increases the risk that a malfunction or damage to the product will occur Avoid exposing any part of your body to the heat from the computer vent or AC adapter for a long time when the computer is on Exposing a part of your body close to the heat from the vent or AC adapter for long periods of time may cause a burn Avoid blocking the vent at the bottom or side of the computer when using it on a bed or cushion If the vent is blocked there is a danger of damaging the computer or overheating the i
30. differ from the pictures used in this guide SAMSUNG k N N O U A W Power Button 5 Speaker N Keyboard Touchpad Touchpad Buttons Multi Card Slot s Optional 10 Status Indicators Microphone Optional 12 LCD 11 Chapter 1 Getting Started Turns the computer on and off A device used to generate sound A device to enter data by pressing the keys The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons A card slot that supports SD Card SDHC MMC and SDXC cards Shows the operating status of the computer The corresponding operating LED is lit when the corresponding function operates You can use the built in microphone The screen images are displayed here Ze Using the camera web cam Using the Cyberlink YouCam program optional you can take pictures or record video by using the computer s built in camera by adding the balloon talk or frame effect Overview Status Indicators Caps Lock f HDD ODD O Charge Status 9 Power Chapter 1 Getting Started This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down On Upper case alphabetic input Off Lower case alphabetic input This turns on when the hard disk is or ODD being accessed This shows the power source and the battery charge status Green When the battery is fully charged
31. dividing the storage space of a hard disk drive into separate data areas known as partitions If a 100GB hard disk drive is partitioned into 2 x 50GB partitions the hard disk drive can be used as if there are 2 hard disk drives Chapter 5 Appendix PCMCIA Personal Computer Memory Card International Association card This is an extended card slot specification for mobile computers such as a notebook computer Not only amemory device but also most peripherals such as hard disk drives LAN cards etc can be connected to this card slot Protocol A protocol is a set of rules used by computers to communicate with each other across a network A protocol is a convention or standard that controls or enables the connection communication and data transfer between computing endpoints It defines the data transmission procedures and the transmission medium for more efficient network functions Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon SD Secure Digital card An SD card is a flash non volatile memory card developed for mobile devices by improving on the MMC card Although an MMC card can be used in an SD card slot an SD card is not recognized when inserted into an MMC card Glossary
32. e Do not lose or forget your password oe If you have forgotten your password contact a Samsung service center In this case a service fee will be charged e The screen images and terms may differ from actual product depending on the computer model and driver version Setting a Supervisor Password A Supervisor Password is required to turn the computer on or to start the System Setup When setting a Supervisor Password users other than a supervisor cannot use the computer 1 Select the Security menu in the BIOS Setup Chapter 3 Settings and Upgrade 2 In the Set Supervisor Password item press lt Enter gt Supervisor Password Clear User Password Clear HDD Password Clear Set HDD Password Enter Password on boot Disabled 3 Enter a password press lt Enter gt re enter the password for confirmation and press lt Enter gt again The password can be up to 8 alphanumeric characters Special characters are not allowed The supervisor password has been set The supervisor password is required to turn the computer on or to enter the BIOS Setup f For some models if the password entered message appears in the Setup Notice window the settings are not complete until the lt Enter gt key is pressed Setting a Boot Password Setting a User Password Users can start the system with a user password but cannot enter the System Setup By doing this you can prevent other users from entering Setu
33. enter the BIOS Setup select Advanced gt Battery Life Cycle Extension and set it to Enable Then i ou can use the battery life cycle extension mode 2 When the following screen appears select a mode and click y y y the OK button You can use the battery in the selected mode Battery Life Extender x Battery Life Extender Max battery charge level can be modified to suit the r ironme operating environment Battery cycle life can be extended by reducing the max battery charge level Battery Mode Settings Battery Normal Mode Battery Life Extension Mode Normal Battery Mode fully 100 charges the battery This mode enables full use of its totally battery capacity Battery Using the Battery Calibration Function When charging discharging the battery repeatedly for a short time only the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display In this case the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function and then recharging it again The screen images and terms may differ from actual product depending on the computer model and driver version 1 Disconnect the AC power adapter after turning off the computer 2 Restart your computer and press the F2 button when the Samsung logo appears to start the BIOS
34. gt For Windows 7 Vista 7 Connect a microphone to the microphone jack You can also use the internal MIC 2 Right click over the Volume icon on the taskbar and select Recording Device Adjusting the Volume using the Volume 3 Check if the microphone is set as the default recording Adjustment Program device If this is the case it is already set as the default device If not Click the Volume icon on the taskbar and slide the volume right click over the microphone and select Set default control bar to adjust the volume 4 Click Start gt All Programs gt Accessories gt Sound Recorder and click Start recording to start a recording Volume W Sound Recorder Mute Windows 7 Vista Windows XP Adjusting the Volume gt For Windows XP 1 Connect a microphone to the microphone jack You can also use the internal MIC 2 Click Start gt Control Panel gt Sounds Speech and Audio Devices gt Sounds and Audio Devices 3 Click Advanced from Volume and then click Options gt Properties 4 Select Realtek HD Audio input from the mixer device to select Recording from Adjust Volume for Properties Mixer device f PREPRE Adjust volume for Playback Recording Other Show the following volume controls Mic Yolume Stereo Mix Chapter 2 Using the computer Q Select Mic Volume from Show the following volume controls and click OK 6 When Recording Control window appear
35. memory module down while pulling the memory module latches outward i 4 Removing a memory module Pull the memory module latches outward The memory module will pop up Remove the memory module out at an angle of 30 degrees Adding a Hard Drive optional 17 3 models only E maaan This computer contains either a single hard drive or dual hard Remove the hard drive bay cover screw and separate the drives optional cover If your computer has a single hard drive you can install an additional hard drive in the secondary hard drive bay Screws Ze e The images used in the instructions below are for illustration purposes only and may differ from the actual product e Supports 9 5mmH 2 5 SATA2 notebook hard drives only sold separately Primary Hard Drive Bay Caution Hard drive cases have sharp edges that can cause Secondary Hard Drive Bay injury e When adding another hard drive use the secondary hard drive case connector and screws that are provided with 3 Insert the secondary hard drive into the case so that all the this product holes are lined up and then fasten the hard drive screws to secure the hard drive to the case Adding a Hard Drive 1 Shut down the computer completely and unplug the power adapter from the main unit Hard Drive Screws Adding a Hard Drive optional 17 3 models only E maaan Attach the connector to the new drive and insert the drive 6
36. move to the wheel of the the cursor mouse and can be moved up down left or right Touchpad Left Button Touchpad Right Button You can selector runa Plays the role of the right program using this button mouse button Chapter 2 Using the computer Basic Touchpad Functions Moving the cursor on the screen Place your finger on the touchpad slightly and move your finger The mouse cursor will move accordingly Move your finger in the direction you wish to move the cursor Click Function Place a finger on the touchpad and click on an item once Alternatively press the left button once quickly and release it Chapter 2 To uch pad Using the computer Double Click Function Drag Function Put your finger on the touchpad and quickly tap twice with your Dragging refers to moving an item to another place after selecting finger on an item you want it Alternatively press the left touchpad button twice quickly Press and hold down the left touchpad button over an item you want to drag and move the item to the new location Holding down the left touchpad button Right Button Function This corresponds to clicking the right mouse button Press the right touchpad button once The corresponding pop up menu appears Chapter 2 To u ch pad Using the computer Q Configuring the Gesture Function The Gesture Function of the Touchpad Optional If the Gesture function is not activ
37. operate your system Retain all Safety and operating instructions for future use Do not use this product near water or a heat source such as a radiator Set up the system on a stable work surface The product should be operated only with the type of power source indicated on the rating label Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit Chapter 5 Appendix If your computer has a voltage selector switch make sure that the switch is in the proper position for your area Openings in the computer case are provided for ventilation Do not block or cover these openings Make sure you provide adequate space at least 6 inches 15 cm around the system for ventilation when you set up your work area Never insert objects of any kind into the computer ventilation openings Ensure that the fan vents on the bottom of the casing are clear at all times Do not place the computer on a soft surface doing so will block the bottom vents If you use an extension cord with this system make sure that the total power rating on the products plugged into the extension cord does not exceed the extension cord power rating For Notebooks with glossy display bezels the user should consider the placement of the Notebook as the bezel may cause disturbing reflections from surrounding light and bright surfaces Important Safety Information Care During Use D
38. or the battery is not installed Red When the battery is being charged Off When the computer is running on battery power without being connected to AC adapter This shows the computer operating status On When the computer is operating Blinks When the computer is in Sleep mode Overview Right View gt For 14 15 6 inch models gt For 17 3 inch models CD Drive ODD Optional USB 3 0 Blue Port or 2 USB 2 0 Black Port e amp gt Optional 3 Security Slot Es es Chapter 1 Getting Started Plays CD or DVD titles Since an ODD Optical Disk Drive is optional the installed drive depends on the computer model You can connect USB devices to the USB port such as a keyboard mouse digital camera etc You can secure the computer by connecting a lock and cable to the Security Slot Overview 4 What is a Chargeable USB port USB device accessing and charging functions are supported The USB charging function is supported regardless of whether the power is turned on or off Charging a device through a Chargeable USB port may take longer than general charging Using the Chargeable USB function when the computer is running on battery power reduces the battery usage time The user cannot evaluate the charging status of the USB device from the computer This may not be supported for some USB devices DC Jack oe Monitor Port O Wired LAN Port a
39. properly you have to install the following program e Winodws Vista 7 Easy Display Manager e Windows XP Easy Display Manager Easy SpeedUp Manager Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse To use the touchpad the touchpad driver is required A built in Windows driver and a driver provided by the manufacturer are provided For a better performance using the driver provided by the touchpad manufacturer is recommended The driver provided by the touchpad manufacturer is already installed in this product by default when you purchase this product When you reinstall Windows or change the operating system using the driver provided by the corresponding manufacturer is recommended gt g a e If you touch the Touchpad or press the Touchpad buttons Chapter 2 Using the computer Use the Touchpad with your fingers Using a sharp object may damage the Touchpad while booting up the Windows boot time may be extended e Checking the touchpad manufacturer Click the Start gt Control Panel gt Hardware and Sound gt Mouse gt Hardware tab and check the device E g Elan Synaptics etc e The Windows driver provides basic touchpad functions moving the pointer clicking etc but the gesture function is not supported Touchpad Scroll Area Touch Area This corresponds Use to
40. sensor pad of the glasses or press and hold the 3D button for 3 5 seconds to reattempt pairing For battery operated 3D active glasses you have to press and hold the 3D button for 4 5 seconds or longer when you perform pairing for the first time 3 Now you can enjoy videos or games in 3D Chapter 2 Using the computer Q The LED indicator for the battery operated 3D active glasses Off When the pairing process is in progress When the pairing progress has been completed When the battery needs to be replaced If you press the power button the LED turns yellow for 3 seconds and then turns off If you press the power button the LED turns red for 3 seconds and then turns off The LED blinks yellow The LED alternates between blinking yellow and red for 3 seconds each The LED blinks red continuously Using 3D for 3D models only The LED indicator for the chargeable 3D active glasses The LED indicator of the glasses changes depending on the operating conditions Turning the power on Turning the power off When pairing is in progress When charging the battery is necessary When the battery is being charged When the battery is fully charged If you put the glasses on the power is automatically turned on and the LED is lit green for 3 seconds If you take the glasses off the power is automatically turned off and the LED is lit red for 3 seconds The LED alternates between gr
41. side place it so that the vents face upwards Failure to do so may cause the internal temperature of the computer to rise and the computer to malfunction or halt Do not place a heavy object over the product This may cause a problem with the computer In addition the object may fall and cause injury or damage the computer Chapter 1 Getting Started Battery Usage Related Dispose of worn out batteries properly e There is a danger of fire or explosion e The battery disposal method may differ depending on your country and region Dispose of the used battery in an appropriate way Do not throw or disassemble the battery and do not put it Into water This may cause an injury fire or explosion Use only a battery authorized by Samsung Electronics Failure to do so may cause an explosion Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery Contact with a metal may cause excessive current and a high temperature and may damage the battery or cause a fire Charge the battery according to the instructions in the manual Failure to do so may cause an explosion or fire from damage to the product Do not heat the product or battery or expose it to heat e g inside a vehicle during the summer There is a danger of explosion or fire Safety Precautions ED Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the produc
42. take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Chapter 5 Appendix ps Correct disposal of batteries in this product Pb Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material re use please separate batteries from other types of waste and recycle them through your local free battery return system USA ONLY This Perchlorate warning applies only to primary CR Maganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to
43. the antenna at all times This device can not be colocated with another transmitter and transmitting antenna FCC Part 68 If fitted with a modem device This equipment compiles with part of the FCC rules On the back of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the telephone company This equipment uses the following USOC jacks RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant See Installation Instructions for details Chapter 5 Appendix The REN is used to determine the quantity of devices which may be connected to telephone line Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by total RENs contact the local telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the Telephone Company will notify you in advance that temporary discontinuance of service may be required But if advance notic
44. the auto adapter optional and then insert the airplane power input jack into the power outlet Charging 1 Connect this end to Converter the auto adapter 4 Connect the airplane power 72 gt input jack to the power outlet of the airplane Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm The following instructions are about maintaining a proper posture during computer use developed through human engineering Please read and follow them carefully when using the computer Otherwise the probability of RSI Repetitive Strain Injury from repeated operations may increase and serious physical harm may be caused EA e The instructions in this manual have been prepared so that they can be applied within the coverage of general users e If the user is not included in the coverage the recommendation is to be applied according to the user s needs Proper Posture Adjust the heights of desks and chairs appropriate to your height The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair Adjust the height of chair so that your heel is comfortably placed on the floor Chapter 1 Getting Started Do not use the computer while you are lying down but only while you are sitting down Do not use the computer on your lap If the computer temperature increa
45. to use an additional the HDD outside of Windows Recovery Area Removal Tool After deleting the recovery area you can use the newly created partition for other uses such as for saving personal data Be careful that once the recovery area is deleted the Samsung Recovery Solutions will not work anymore e For models with Samsung Recovery Solution the HDD capacity representation in Windows may be smaller than the actual capacity because Samsung Recovery Solution uses a hidden area of about 5 20GB of the HDD to save the recovery image and that hidden area is not counted towards the total size available to Windows The size of Samsung Recovery Solution varies by models because of the different size of applied programs Chapter 5 Appendix Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Product Specifications Glossary Index Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment However to ensure safe use of this product it is important that the safety instructions marked on the product and in the documentation are followed Always follow these instructions to help guard against personal injury and damage to your system Setting Up your System Read and follow all instructions marked on the product and in the documentation before you
46. wearing AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality Connect the power cord to the AC adapter Connect the power cord to an outlet or multiple power plug extended cable with a ground terminal Failure to do so may result in electric shock If water or another substance enters the power input jack AC adapter or the computer disconnect the power cord and contact the service center Damage to the device within the computer may cause electric shock or fire hazard Keep the power cord or outlet clean so that they are not covered with dust Failure to do so may result in fire firmly Otherwise there is a danger of fire due to an incomplete contact Use only the AC adapter supplied with the product Using another adapter may cause the screen to flicker Do not place heavy objects or step onto the power cord or AC adapter to avoid damaging the power cord or AC adapter If the cord is damaged there is a danger of electric shock or fire Safety Precautions A warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Battery Usage Related i Please charge the battery fully before using the computer for the first time Keep the battery out of the reach of infants and pets as they could put the battery into their mouths
47. 2 Using the computer 6 A If connected devices are not displayed refer to the Easy Content Share item in the Troubleshooting Guide Adding shared content on your computer Add the videos photos and music files that you want to play on your TV as shared items You can only play shared items on your TV 1 2 Click Settings O at the top right of Easy Content Share Click My computer gt Add Folder f The Browse For Folder window appears Select a folder to share and click OK ii Easy Cont Sharen ORAA This is a shared folder list set to allow devices to play the files in the folders You can add or remove a shared folder by pressing the Add Remove Folder button on the right Computer gt amp Local Disk C gt amp 3 DVD RW Drive D gt a USBDrive T4 E gt f BD ROM Drive F Make New Folder Chapter 2 Sharing Content in a Home Network Easy Content Share Optional Ying the computer 3 The selected folder is added to the shared list 2 Select the item you want to play in the playlist and then click _ Play i S 3 The selected file is played on the TV an z Using the Play Control panel you can control the item being played on the TV it Easy Co hare tasy Com nare Settings 4 To stop playing click Stop E Z Easy Content Share does not support subtitles due to DLNA lavi J constraints Playing content on your TV using your computer s To use the ca
48. K Clone or LCD HDMI DualView mode using the Shortcut Key Fn a To listen to sound on the computer after disconnecting the HDMI TV you have to set the Playback Device to Speakers Using the computer Connecting an External Display Device Chapter 2 Using graphics more efficiently optional NVIDIA Optimus is a function that enables automatic selection and usage of the internal or external graphics chipsets depending on the currently running software For example the internal graphics chipset can be used for Internet surfing or word processing to minimize battery power consumption and the high performance external graphics graphic chipset can be used for gaming or video processing to deliver a more realistic experience The NVIDIA Optimus model supports Windows 7 only e This function is only available in models that support the NVIDIA Optimus technology Registering programs to be executed by the external graphics chipset To run a program using the external graphics graphic chipset you have to register the program in the NVIDIA Panel Some programs are pre registered To register more programs e g 3D games etc complete the following steps 1 Right click over the Desktop and select NVIDIA Panel 2 Select 3D Settings gt Manage 3D settings in the left pane and select the Program Settings tab 3 In the Select a program to customize S field click the Add button to register the software Z
49. N uses the Ethernet media access control method developed in the early 1980s To connect to an Ethernet a network card called a LAN card Ethernet card or network interface card is required To exchange data between computers a protocol is required besides the hardware equipment Windows Vista uses TCP IP as the default protocol LCD Liquid Crystal Display There are Passive Matrix and Active Matrix LCD types This computer uses the Active Matrix type LCD called a TFT LCD Since an LCD is implemented by transistors instead of a cathode ray tube unlike a CRT its size can be slim And because it does not blink it reduces eye strain Glossary MMC MultiMedia Card card This is an external type flash memory used for mobile devices such as mobile phones or digital cameras Network A group of computers and devices such as printers and scanners connected by a communications link A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links The biggest network is the Internet a worldwide network Network Administrator A user who plans configures and manages network operations Sometimes a network administrator is called a system administrator Notification Area This refers to the right area of the Taskbar including program icons such as the volume control the power options and the time Partition This refers to the act or practice of
50. Press the F10 key to save the settings and exit Setup NumLock Off TouchPadMouse Enabled The highest boot priority device is now set to the Hard Drive InternalLAN Enabled PXE OPROM Disabled Smart Battery Calibration Chapter 3 Upgrading Memory Settings and Upgrade One or more memory modules are installed on the computer Adding or Replacing Memory Modules There are 2 memory slots and users can replace the installed memory or add new memory 1 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver Ze e Replace or install new memory only after shutting the computer down completely Do not replace or install memory when the computer is in Sleep mode Disconnect main power plug and remove the battery before continuing e To utilize the dual channel feature using memory modules with the same specifications of the same capacity and from the same manufacturer is recommended e The images used for the illustration are of a representative model therefore the images may differ from the the actual Insert a new memory module into the memory slot at an product angle of approximately 30 degrees aligning it to the angle of the memory slot Fixing Screw Memory Slot Upgrading Memory a nanan Q 3 Push the memory module down so that it is completely fixed 4 Close the memory compartment cover and fasten the screw If the memory does not fit easily push the
51. SDHC Secure Digital High Capacity card This is the extension of the SD card that supports over 2GB bytes Server In general a server refers to a computer that provides shared resources for network users Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it Shared Folder A folder that can be used by other users on the network Sleep Mode A power mode that enables computers to save power consumption when they are not being used When a computer is in Sleep Mode the data on the computer memory is not saved to the hard disk If the power is turned off the data in memory will be lost System File System Files refer to files that are read and used by the Windows operating system In general system files must not be deleted or moved Chapter 5 Appendix TCP IPv4 This is a 4 byte 32 bit address system separated into each byte 8 bits by a dot and each byte is represented as a decimal number USB Universal Serial Bus This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS 2 The data transmission specifications are one of the interface Standards used to connect a computer to peripheral devices These specifications include USB 1 0 1 1 2 0 and 3 0 It is appropriate to support peripheral devices that require high data rates such as an AV device secondary HDD or CD RW T
52. Tab gt or lt Enter gt selects eee Field Help for the selected ANNANN AAAA RAA AN S AN GHZ AAN MB AAA MB AAN MB RAKRRKRR RANRAARR item appears automatically Setup Items Description This is a description about the basic specifications of the computer Using this menu you can configure the major chipsets and additional functions Used to configure security functions including passwords This menu enables you to configure peripherals and booting related settings such as the boot priority Used to exit the Setup either saving the changes or not System Setup Keys Chapter 3 Settings and Upgrade In the Setup you have to use the keyboard F1 Up amp Down Keys F5 F6 F9 ESC Left amp Right Keys Enter F10 F10 Press to view the Setup Help Press to move up and down Press to change the item value Press to load the default Setup settings Press to return to a higher level menu or to move to the Exit menu Press to move to another menu Press to select an item or to enter a sub menu Press to save the changes and exit Setup i 4 The keyboard image may differ from the actual keyboard Setting a Boot Password When setting a password you have to enter a password to use the computer or enter the BIOS Setup By configuring a password you can restrict system access to authorized users only and protect data and files saved on the computer Ze
53. The first time the computer boots up after a Complete Restore has been performed the speed of the boot process may be slowed down due to the system optimization process At this time do not shut the computer down by force Samsung Recovery Solution Optional Complete Backup Restore A Complete Backup saves the complete image of the C drive onto another drive or DVD A Complete Restore restores the image file saved by the Complete Backup onto the C drive Complete Backup EA If you perform the Complete Backup function onto a DVD or removable storage device you can restore your computer even when a problem occurs with the hard disk or when the restoration area is removed To create a backup a removable storage device with at least 15 GB of free space is required 1 Click Backup in the start screen of the Samsung Recovery Solution 2 Enter a description of the current status of the computer and click Next 5 After connecting a DVD drive or removable storage device you can specify the DVD drive or removable storage device as the Save Path Chapter 4 Backup Restore jas Samsung Recovery Solution e Samsung om mz Recovery Solution Backs up the current state of the Windows drive to another drive a DVD or Blu ray disc or an external type storage device as an image You can easily restore your computer te the current state using the backup image when your computer does not work properly due to a v
54. apacity This extends the battery life time Battery Extending the Battery Usage Time Decreasing the LCD Brightness Press the E keys on the keyboard to decrease the LCD brightness to extend the battery usage time Using Battery Manager Optional Battery Manager is a power management program that enables using the battery power efficiently You can select an optimized power mode according to your requirements f The Easy Battery Manager program is optional and may not be provided depending on your model i 4 Using the Easy Battery Manager power options To use the power options of the Easy Battery Manager program after reinstalling Windows you can install the Easy Battery Manager program using the system software media Since the power options provided by the Easy Battery Manager program are optimized to extend the battery usage time high performance programs may slow down when running on battery power In this case it is recommended connecting the AC adapter or selecting high performance mode Chapter 3 Settings and Upgrade gt For Windows 7 Vista Click Start gt Control Panel gt Hardware and Sound gt Power Options Alternatively right click the power measuring device icon in the notification area of the taskbar and select Power Options 2 If the following screen appears select one of the modes Select a power plan Power plans can help you maximize your computer s performance o
55. ar properly In this case the 3D active glasses are automatically turned off after a short period Watch a 3D picture from the recommended distance The recommended operating range is as follows sella Within 2M 0 4 1M for best performance Distance Within 45 horizontally View Angle Within 10 vertically 200cm yin 45 45 60 3 60 If you lie on your side while watching TV and you are wearing 3D active glasses the picture may appear dark or may not be visible a t 40 100cm If you watch 3D pictures for a long time in the same posture the glasses may turn off automatically Using 3D for 3D models only SAFETY PRECAUTIONS A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality A parent or child minder should keep an eye on any children or infirm persons on a regular basis while they watch 3D content Children and even some adults may experience eye strain headaches dizziness or nausea while watching 3D content In this case stop watching 3D content and take a rest Do not use the 3D glasses for any purpose other than watching 3D TV such as general eyeglasses sunglasses protective goggles etc e Watching 3D images for an extended period of time may cause eye strain If you feel eye strain stop viewing the 3D content remove the 3D glasses and take a rest e Do not use the 3D function or 3D glasses while wal
56. ated you can activate it according to the following procedures 4 e The Touchpad Gesture function may not be provided and 1 gt When using the Elan driver the version of the function may differ depending on the Click the Start gt Control Panel gt Hardware and Sound gt model Some usage procedures may differ depending on Mouse gt ELAN gt Options button the version e For detailed usage procedures refer to the description in gt When using the Sysnaptics driver the Touchpad Settings window Click the Start gt Control Panel gt Hardware and Sound gt e Since these descriptions are written on the basis of the Mouse gt Device Settings tab gt Settings button latest operating system Windows 7 some of the content and the figures of the descriptions may differ depending 2 The Touchpad Settings window appears Click over the on the operating system Since the procedures for other corresponding item to select the item in the Select an item Windows operating systems are similar use the computer and click OK referring to these descriptions naih hoad he followi dditional 52 To cancel the Gesture function unselect the corresponding An ie LOUCA pad yOUNaly Use ETA N Ae Ge ASNE item in the Touchpad Settings window and click OK functions Scroll function Zoom functions Rotation function Page Move Function Chapter 2 To u ch pad Using the computer Q The Scroll Function Rotation function This function i
57. ations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should make sure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Chapter 5 Appendix To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself Contact the appropriate inspection authority or an electrician as appropriate The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 Regulatory Compliance Statements Este equipamento opera em car ter secund rio isto nao tem direito a protecao contra interfer ncia prejudicial mesmo de esta es do mesmo tipo e nao pode causar interfer ncia a sistemas operando em car ter prim rio European Union CE Mar
58. atus Charge LED terminals or disassemble the battery pack e Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the battery e Please refer to the system operation environment of Charging complete Green or Blue this manual and operate and store the battery at room temperature AC adapter not off connected Charging Red or Orange 16 16 Battery Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures To use the shortcut key to view Press the Ps keys on the keyboard The remaining battery charge will displayed for a moment You can only view the charge status in this way when Easy Display Manager is installed on your computer Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge 98 remaining 10 35AM 7 21 2009 83 6 Chapter 3 Settings and Upgrade Battery Usage Time Information A battery is an expendable supply so when using it over a long time the capacity battery life is shortened If the battery life is reduced to under half of its initial time we recommend purchasing a new battery When not using the battery for a long time store the battery after charging it to 30 40 of its c
59. c shock Safety Precautions Getting started A warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality When carrying the notebook computer with other items such as the adapter mouse books etc take care not to press anything against the notebook computer If a heavy object is pressed against the Security and Movement Related notebook computer a white spot or stain may appear on the LCD Therefore take care not to apply any pressure to the notebook Follow the instructions for the relevant location e g airplane hospital etc when using a wireless communication device wireless LAN Bluetooth etc In this case place the notebook computer in a separate compartment away from the other objects Avoid exposing a drive to magnetic fields Security devices with magnetic fields in clude airport walk through devices and se curity wands The airport security devices that check car ry on luggage such as conveyor belts use x rays instead of magnetism and will not damage a drive Safety Precautions ED Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Installation Related Do not block the ports holes vents etc of the product and do not insert objects Damage to a component within the computer may cause electric shock or fire When using the computer with it lying on its
60. creen Restore the computer using Samsung Recovery Solution Internet 1 Turn the computer on and press the F4 key when the A Restore Internet Explorer to its initial state booting screen SAMSUNG logo appears 1 Launch Internet Explorer click Tools gt Internet 2 The computer will boot up in restore mode after a short Options gt Advanced gt Load defaults while and Samsung Recovery Solution appears 2 If the Internet Explorer setting again window ca 3 When the start menu screen appears click Restore appears select Set again E 3 In the Internet default setting restoration window a select Close The keyboard Fn keys shortcut keys do not work E one This is a compatibility problem between the Hancom Office software and Internet Explorer To resolve this problem reinstall Internet Explorer 8 or install Internet Explorer 7 or earlier Install Easy Display Manager and Easy Speedup Manager A want to restore the computer to the state when it was purchased How can I extend the battery usage time If you sg the samsung Recovery Solution function IOS The battery usage time may be shortened if you recharge can easily and quickly restore the computer to a previous the battery before it is completely discharged state even if you do not have a separate OS recovery DVD or recovery CD To resolve this problem enter the BIOS Setup and select Battery Calibration to discharge the battery completely and th
61. ct all cables connected to the Never heat the product or battery or put the product or battery into a fire Do not put or use the product or battery in a hot location such as a sauna inside a vehicle exposed to the heat and so on There is a danger of an explosion or fire Take care not to allow metal objects such as a key or clip to touch the battery terminal metal parts If a metal object touches the battery terminals it may cause excessive current flow and it may damage the battery or result in a fire If liquid leaks out of the product or battery or there is a funny smell coming from the product or battery remove the the product or battery the computer and contact a service center There is a danger of an explosion or fire To use the computer safely replace a dead battery with a new authorized battery computer before cleaning it If your notebook is external amp removable battery type remove the external battery There is a danger of electric shock or damage to the product Do not connect a phone line connected toa digital phone to the modem There is a danger of a electric shock fire or damage to the product Do not place any container filled with water or chemicals over or near the computer If water or chemicals enter the computer this may cause fire or electric shock If the computer is broken or dropped disconnect the power cord and contact a se
62. ct method only when the Optical Disk Drive is stopped There is a danger of injury Safety Precautions Getting Started a DAuuOn Security and Movement Related Failure to follow instructions marked with this symbol may cause slight injury or damage to the product When moving the product turn the power off and separate all connected cables first The product might be damaged or users may trip over the cables Upgrade Related For long periods of not using the notebook computer Take care when touching the product or parts discharge the battery and preserve as it is detached For external amp removable battery type The device may be damaged or you may be injured The battery will be preserved at its best condition Take care not to throw or drop a computer part or device This may cause injury or damage to the product Do not operate or watch the computer while driving a vehicle Make sure to close the computer cover before connecting There is a danger of a traffic accident Please concentrate on the power after a reassembly driving There is a danger of electric shock if your body touches an internal part Use parts authorized by Samsung Electronics only Failure to do so may cause fire or damage the product Never disassemble or repair the product by yourself There is a danger of electric shock or fire To connect a device that is not manufactured or authorized by Samsung Electronics enquire at your
63. d may cause a system problem Thereafter when turning the computer back on the disk checking program may launch to check for and correct any disk errors Chapter 1 Getting Started Turning the Computer On and Off vane Getting Started Samsung Fast Start Optional lt 2 These descriptions are for Windows 7 and for supported The Fast Start function will be turned on or off according to 7 models only your selection E While the Fast Start function is enabled If you are using the system very often while on the move use Fast Start to reduce the booting time e You cannot change some power options in the Control a l Panel To change these first disable the Fast Start function When the Samsung Fast Start function is being used the computer runs in hybrid power saving mode when the computer enters standby mode or hibernation mode e The existing power saving mode and maximum power saving mode functions have been replaced by this function Using Fast Start e Battery and AC power should be removed before you open SSN OOOO memory door to change or add memory 1 Runs Samsung Fast Start The LCD may flicker once if the Fast Start function is turned ON or OFF 2 Select ON or OFF depending on your requirements and click Ze What is hybrid power saving mode O Ed K In hybrid saving mode the data you are working on will be saved to memory and the HDD in the event of a sudden power failure ensuring the safety of your
64. d check the Automatically allow devices to play my media menu item Click Return to playlist screen J In the playlist screen you can find that the selected item has been added to the playlist Chapter 2 Sharing Content in a Home Network Easy Content Share Optional gy 5 5 the computer 3 Run Windows Explorer gt For Windows Media Player 11 1 Run Windows Media Player 4 Right click the folder to share From the menu displayed point to Include in library Click Videos Photos or Music in the displayed sub menu according to the type of content contained in the selected Click Library gt Media Sharing The Media Sharing window is displayed Check the Share my media checkbox and then click OK folder If the selected folder contains two or more types of content lelx you must click each corresponding menu item Videos m m Photos or Music to register each type of content Goao Paria cuin FE gt searc E Organize Include in library Share with Burn New folder nse TY pih pg Hia 4 Favorites Name 7 j Date m E Desktop di manual 8 18 ee ee T Doni i oee 6 22 vate 1 Ree BEE Media S fing H hare music pictures and video on your network Open in new window lt lt i Learn about sharing Online 4 Libra eae 1 APE Ha Do aia Sharing settings a d M Restore previous versions a _ z gt E Pi Inclu
65. data r Samsung Fast Start Samsung Fast Start However as unexpected accidents can always occur it is recommended backing up any important data beforehand Fast Start enables system to enter sleep mode regardless of your current system p etti ets you access your desktop faster ower settings an CANCEL Chapter 2 Using the computer Keyboard Touchpad CD Drive ODD Optional Multi Card Slot Optional Connecting an External Display Device Connecting an External Digital Device Adjusting the Volume Wired Network Wireless Network Optional Sharing Content in a Home Network Easy Content Share Optional Using 3D for 3D models only Chapter 2 Keyboa rd Using the computer Shortcut key functions and procedures are discussed in the following sections i e The keyboard image may differ from the actual keyboard The keyboard may differ depending on your country The following mainly describes the shortcut keys e Either type A or B is provided depending on the model Shortcut Keys You can use the following functions by pressing the keys below with the Fn key gt Type A Model E F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 a t gt Type B Model Esc F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 FI2 7 Keyboard Fn 7 on ate a F6 Cx o e REST Sleep Mode Gauge Euro CRT LCD Backlight Mute Chapter 2 Usi
66. de in library 2 Documents Share my media 5 H Vid Music Pictures How does sharing change firewall settings gt a Ho Videos i Create new library 3 In the Media Sharing window click Settings The Media Sharing Default Settings window is displayed Check the Allow new devices and computers automatically not recommended checkbox Chapter 2 Sharing Content in a Home Network Easy Content Share Optional ying the computer 79 A popup window is displayed Click Yes Then click OK in the For a shared content item the name of the computer where the Media Sharing Default Settings window and inthe Media item is stored is displayed next to it allowing you to identify the Sharing window computer This is useful when multiple computers are providing content Media Sharing i Share music pictures and video on your network Sharing settings Share my media to Media Sharing Default Settings Choose what you share by default with new devices and computers cat Share media as Default settings Star ratings Parental ratings Music O All ratings All ratings Pictures Only O Only Video Rated 2 stars or higher Include unrated files Media types A folder added as a The name of the PC where shared item the content is stored How do customize sharing Ss Add Devices g T j IF you continue any media player that is d
67. dures other than those specified in this manual may result in hazardous radiation exposure To prevent l exposure to laser beams do not try to open the enclosure Do not put rechargeable batteries or products powered by oa CD Or DYD diye non removable rechargeable batteries in the garbage e Class 1M laser radiation when operating part is open Contact the Samsung Helpline for information on how to dispose Do not view directly with optical instruments of batteries that you cannot use or recharge any longer l l l l e Class 3B invisible laser radiation when open Follow all local regulations when disposing of old batteries Avoid exposure to the beam E THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Replacement Parts and Accessories Appendix Connecting and Disconnecting the AC adapter General Requirements The requirements listed below are applicable to all countries The socket outlet should be installed near the equipment and should be easily accessible All power cord sets must be approved by an acceptable Do not unplug the power cord by only pulling the cable accredited agency responsible for evaluation in the country where the power cord set will be used e The power cord set must have a minimum current capacity of 7 Aand anominal voltage rating of 125 or 250 volts AC as Power Cord Requirements required by each c
68. e is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with this equipment Modem for repair or warranty information please contact your local distributor If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved Regulatory Compliance Statements The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product No repairs may be done by the customer This equipment cannot be used on public coin phone service provided by the telephone company Connection to party line service is subject to state tariffs The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device including fax machines to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is se
69. e 5 25 to 5 35 GHz and 5 65 to 5 85 GHz bands These radar Stations can cause interference with and or damage this device The FCC has set a general guideline of 20 cm 8 inches separation between the device and the body for use of a wireless device near the body this does not include extremities This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by the FCC This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Regulatory Compliance Statements i Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service E FCC Statement for Wireless LAN use While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW cm2 may be exceeded at distances close to the antenna installed Therefore the user must maintain a minimum distance of 20cm from
70. e a l ext rieur de b timents une licence de l IBPT est requise Pour les enregistrements et licences veuillez contacter IBPT Chapter 5 Appendix France For Metropolitan departments 2 400 2 4835 GHz for indoor use 2 400 2 454 GHz channels 1 to 7 for outdoor use For Guadeloupe Martinique St Pierre et Miquelon Mayotte 2 400 2 4835 GHz for indoor and outdoor use For Reunion Guyane 2 400 2 4835 GHz for indoor use 2 420 2 4835 GHz for outdoor use channels 5 to 13 The low band 5 15 5 35 GHz is for indoor use only Regulatory Compliance Statements European Telecommunication Information for products fitted with EU approved modems Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999 5 EC Such marking is indicative that this equipment meets or exceeds the following technical standards CTR 21 Attachment requirements for pan European approval for connection to the analogue Public Switched Telephone Networks PSTNs of TE excluding TE supporting voice telephony services in which network addressing if provided is by means of Dual Tone Multi Frequency DTMF signaling Although this equipment can use either loop disconnect pulse or DTMF tone signaling only the performance of the DTMF signaling is subject to regulatory requirements for correct operation It is therefore strongly recommended that the equipm
71. e is completed check if the data has been restored to the specified folder Chapter 4 Backup Restore Backup Restore Samsung Recovery Solution Optional gt Restore Q System Software Function Installing System Software The System Software function is a function that enables you to NaN reinstall device drivers and System Software Programs or back up 1 When the initial menu screen appear click System Software those programs gt System Software Installation E Samsung Recovery Solution jie a Samsung r Recovery Solution System Software 5 The system software function is supported by Samsung Recovery Solution version 4 or later Therefore the function may not be supported depending on the version a aa a tl The System Software Backup backs up system software such as device drivers and applications gt Select a function The System Software Installation Function only works in Microsoft Windows 2 When the Samsung System Software screen appears check all the device drivers and application programs you want to install and then click Install Now 3 After the installation is complete the computer will restart Samsung Recovery Solution Optional System Software Backup 1 When the initial menu screen appears click System Software gt System Software Backup 2 Specify the Save Path 4 If your computer has a DVD Writer you can specify the DVD drive as the Save Path
72. ect increases the longer the graph bar is displayed When Using Games or Multimedia The system may not operate properly in maximum battery mode It is recommended to connect the AC adapter to the system or to use the system in general mode Usage Mode of Samsung Battery Manager The maximum battery mode optimizes the system operation speed to increase the battery run time so the program execution time may get longer If you change the power settings the properties in Power Options window will also be changed Chapter 3 Batte ry Settings and Upgrade Extending the Battery Life Optional This mode maintains 100 of the battery The Battery Life Extender is a battery power management Battery Normal charge when using the computer on AC power program that enables extending the battery life Users can change Mode In this case although the battery use time the settings depending on their requirements increases the battery life is reduced This mode maintains 80 of the battery charge g The Battery Life Extender is optional and may not be Battery Life when using the computer on AC power In this supplied depending on the model Extension Mode case although the battery use time decreases e The screen images and terms may differ from actual the battery life is extended product depending on the computer model l f Press the F2 key when the Samsung logo appears in the 7 Run Battery Life Extender booting sequence to
73. een and red The LED blinks red at 2 second intervals In this case charge the glasses with the micro USB cable The LED blinks amber at 1 second intervals The LED blinks green at 2 second intervals Chapter 2 Using the computer Charging the chargeable 3D glasses If the LED blinks red at a 2 second interval charge the glasses with the micro USB cable When the battery is fully charged the LED blinks green at a 2 second interval USB cable Micro USB cable Notebook Using 3D for 3D models only Restrictions The 3D function only works in Windows 7 Only a dedicated pair of Samsung 3D glasses and a Samsung 3D computer can be connected You cannot connect the computer to another pair of 3D glasses or 3D product Before using the 3D function make sure to read the SAFETY PRECAUTIONS While you are watching in 3D the maximum screen brightness is maintained and the brightness cannot be changed The 3D function does not work on normal external monitors RGB HDMI or TVs RGB HDMI The 3D function only works on the computer s LCD panel When a 3D monitor or TV is connected through an HDMI interface the 3D function is supported on either screen Chapter 2 Using the computer Viewing precautions If you switch the mode from 3D to 2D while watching a 3D picture the 3D function of the screen is turned off the 3D active glasses do not work properly and the picture may not appe
74. efer to the Help section of the program Chapter 4 Backup Restore Samsung Recovery Solution Optional Recovery Solution Representation Optional The capacity representation of the hard disk drive HDD What is a Recovery Area in Windows is different from the product specifications e Samsung computers have an additional partition to recover e The capacity of the storage device HDD of the manufacturer is computers or save backup files Only for models with the Samsung Recovery Solution This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity This is due to the difference in capacity calculation and does not mean the installed HDD is different from the product specifications e You can either double click the Samsung Recovery Solution icon on the desktop or press F4 while booting the computer to enter the Recovery Area Then you can back up the present computer e The capacity representation in Windows may be smaller than the state or recover the computer from backed up images pee y actual capacity because some programs occupy a certain area of For deleting the Recovery Area you need
75. en recharge the battery I want to connect an external monitor TV or projector Connect the display device and the computer with the monitor and repeatedly press the F4 key while holding down the Fn key For detailed information on a function refer to the corresponding section of the User Manual Before You Start Before reading the User Guide first check the following information Optional items some devices and software referred to in the User Guide may not be provided and or changed by upgrade Note that the computer environment referred in the User Guide may not be the same as your own environment The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may differ from the actual appearance of the product This guide decribes procedures for using both the mouse and the touchpad This manual has been written for the Windows operating system The descriptions and figures may differ depending on the installed operating system The User guide supplied with this computer may vary depending on your model Ze Using the software The software described in the main text can be launched using the following menu path Start gt All Programs Start gt All Programs gt Samsung When the programs are not installed select Samsung Recovery Solution gt System Software to install the programs Only for models supplied with Samsung Recovery
76. ent is set to use DTMF signaling for access to public or private emergency services DTMF signaling also provides faster call setup Chapter 5 Appendix This equipment has been approved to Council Decision 98 482 EEC CTR 21 for Pan European single terminal connection to the Public Switched Telephone Network PSTN However due to differences between the individual PSTNs provided in different countries the approval does not of itself give an unconditional assurance of successful operation on every PSTN termination point In the event of problems you should contact manufacturer Technical Support WEEE Symbol Information Correct disposal of this product ma Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can
77. er a product supports DLNA refer to the respective user manuals To play videos photos and music files stored on a computer configure the settings in the order as shown below 1 Configuring the network settings for your computer and TV 2 Adding shared content on your computer 3 Playing content on your TV using your computer Chapter 2 Using the computer Q Configuring the network settings for your computer and TV To share content all shared devices must be connected to the same access point Configure the network settings by following the steps below Connect your computer and TV to an access point through a wired or wireless LAN connection as shown in the figure below Network connection diagram 2 Configure the IP address settings for your computer and TV You must check the Obtain an IP address automatically DHCP checkbox Sharing Content in a Home Network Easy Content Share Optional EA e For more information on how to configure the IP address for your computer refer to Chapter 2 Using the Computer gt Network e For more information on how to configure the IP address for your TV refer to the user manual of your TV To check if the network environment has been configured run Easy Content Share If the connected computer and TV are shown in the program window the network settings have been configured successfully Devices that can share content Chapter
78. er and then restart the system If the programs are not removed in this order an error may occur or the device may not work properly Chapter 2 Wi red N etwork Using the computer A wired network is a network environment used for a company 2 gt For Windows 7 network or broadband internet connection at home Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center and click on Change adapter settings in the left menu pane i e Since these descriptions are written on the basis of the latest operating system Windows 7 some of the content f p y eE Uu and the figures of the descriptions may differ depending GO s gt Control Panel theta gt e Center on the operating system Since the procedures for other Sonia View your basic network information and set uf Windows operating systems are similar use the computer ae A x Q e e SAMSUNG PC Internet referring to these descriptions Change anced a This computer 5 5 p View your active networks The figures used for the description are of a representative model Therefore the figures may differ from the real ones Oe eases ae ae Set up a wireless broadband dial up ad hoc or VPI 1 Connect a LAN cable to the computer s LAN port gt For Windows Vista Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center and click Manage Network Connections in the left menu pane gt For Windows XP
79. etecte any network Ney you use will be able to access your shared library Seale you are connected Do you want to continue ras i a D o f Content sharing is only available with Windows Media Player 11 or later If your Windows Media Player is earlier than Windows Media Player 11 download and install Windows Media After the registration has been finished you can find the added ARSED UL or leter MOL Cre MUCIESOL Wee ee folder is listed in the shared content list of Easy Content Share Using 3D for 3D models only You can enjoy content such as videos games and photos in 3D using the 3D glasses y e The 3D program TriDef 3D Portal or CyberLink Media Suite is provided For Bluray 3D video use the CyberLink Media Suite program For 3D games use the TriDef 3D program e For more details on using the programs refer to the online help for each program SS Using the 3D function The following items are required to use the 3D computer e Samsung 3D computer a model with 3D graphics and a 3D LCD panel Optional e 3D program TriDef 3D Portal or CyberLink Media Suite Optional e 3D glasses Chargeable or battery operated type optional Chapter 2 Using the computer Types of 3D active glasses Battery 3D Button compartment cover LED indicator Liquid crystal shutter Battery operated 3D active glasses Liquid crystal shutter 3D Button LED indicator C
80. f the computer The 3D active glasses only work when you play content in 3D mode videos games photos using the 3D program The glasses do not work in 2D mode The 3D function videos games photos only works in full screen mode For battery operated glasses replace the battery Q2 The 3D glasses LED blinks red continuously A For chargeable 3D active glasses charge the glasses Charge the battery with the micro USB cable For battery operated glasses this indicates that the battery is worn out Replace the battery Chapter 2 Using the computer Q3 Can watch 2D content in 3D A You can watch 2D content in 3D by selecting 3D mode in the 3D program However some content may not be supported For supported games and file formats refer to the online help of the program LCD Brightness Control Setting a Boot Password Changing the Boot Priority Upgrading Memory Adding a Hard Drive optional 17 3 d Battery be S we ing the Security Slot i a d d o os y ad LCD Brightness Control You can adjust the LCD brightness in 8 levels f The screen brightness is automatically set to the brightest level brightness level 8 when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the key or the
81. hargeable 3D active glasses Using 3D for 3D models only Using the 3D function You can use the 3D function of the Samsung 3D computer after connecting the 3D glasses to the computer through a Bluetooth connection 1 In the 3D program run a 3D video 3D game or 3D photo 4 For the battery operated glasses insert the battery and remove the protective film before use i The 3D function is only provided in full screen mode The 3D function does not work in window mode Chapter 2 Using the computer The TriDef 3D Portal screen Golf I riDefMovie gt 4 J gt 3p 3D 2D Mode Selection and 3D Display Settings Button CyberLink Media Suite screen lt gt CyberLink PowerDVD Wildlife wmv 3D 2D Mode Selection and 3D Display Settings Button Using 3D for 3D models only 2 q A If you put on the 3D active glasses and press the 3D button the data exchange begins between the glasses and the software hereafter referred to as pairing Only when a 3D video or 3D game is executed can the pairing process be done More than one person can watch pictures in 3D at the Same time using more than one pair of glasses A chargeable pair of 3D active glasses may not work if the battery is discharged In this case charge the glasses before use For chargeable 3D active glasses if the glasses do not start working immediately when you put them on in 3D mode lightly touch the
82. he higher the version e g USB 3 0 the higher the data rate provided Virtual XP Mode This is a virtual operating system that enables running Windows XP programs on the Windows 7 operating system Using this mode you can run programs that do not run on Windows 7 Windows Media Player A multimedia program included with Windows Using this program you can play a media file create an audio CD listen to a radio broadcast search and manage media files and copy files to a portable device etc Index A AP Battery BIOS Setup Booting Priority C CD Drive Charge Click D Double Click Drag Dual View L LCD Brightness 69 100 90 95 48 100 42 43 43 54 88 M Memory Monitor Connection Output Multi Card Slot O Overview P Password Product Specifications R Recorder S Safety Precautions Samsung Recovery Solution Scroll Security Slot Shortcut Key Status Indicators Supervisor Password 97 52 49 24 92 141 61 109 45 107 36 26 92 T Touchpad U User Password V Volume Control W Wired Network Wireless Network Chapter 5 Appendix 42 93 61 65 69 VN4xx_RF VN5xx_RF VN7xx_RF
83. he pictures Optional cancel the mute may differ from the actual appearance of the product Vol Up Vol Down depending on the model 3 Buttons 4 Press these buttons to control the volume e The actual color and appearance of the computer may Optional differ from the pictures used in this guide Easily turns on or off the several wireless network settings at the same time This button is useful on the airplane to turn off every wireless network device You also can set up a specific wireless network device with the Fn combination NJ 12 On Shows that any wireless network devices are turned on Wireless Button Off Shows that no wireless network gt Optional device is turned on Ze Initializing process will take about 5 seconds after pressing this button g If you want to change the status again press this button after 5 9 seconds SAMSUNG _ a i 3 N N O U A W If the device cannot search wireless network while this button shows On press the Fn F key combination to search and configure it manually Overview Ze e The pictures used for the cover and the main body in the i User Manual are those of the representative model of each series Therefore the colors and appearance of the pictures may differ from the actual appearance of the product 12 11 10 depending on the model The actual color and appearance of the computer may
84. ified a hard disk drive or a removable disk as the Save Path the SamsungRecovery SamsungData folder is created on the corresponding drive e g D and the data is saved to the folder Take care to not delete the folder by mistake or on purpose 2 In the data selection screen select either Basic Selection or Select from all select a folder or file to be backed up and then click the Next button 3 Enter a description for the backup in the Description field so that you can easily recognize it later and specify the Save Path 4 If you click the Next button the Data Backup begins If you have selected the DVD drive as the Save Path the Insert a blank DVD message appears Insert a blank DVD and click 52 If your computer has a DVD Writer you can specify the DVD the OK button drive as the Save Path 5 The Backup is completed message appears Samsung Recovery Solution Optional Data Restore 1 V A w N When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive When backing up to a removable storage device Connect the removable storage device When backing up to another drive Proceed to Step 2 When the initial menu screen appears click Restore and then click Data Restore Select a backup item to be restored in the backup list and click the Next button Select a folder for the restoration and click the Next button Data Restore begins When Data Restor
85. irus infection or for any other reasons gt Enter a description forthe backup image directly or select one and then click the Next button Backup Point 04 29 2010 Backup Capacity 5 1GB Description Save Path B Local Disk 425 7GB Available v DA Local Disk 425 7GB Available E BD RE Drive a Save location displays all drives that have enough space A ee ne Select Drive D Select the DVD drive 3 When the option selection item appears select an option and click Next The Livelmaging and System Software Backup functions are supported as options for the Complete Backup operation e Livelmaging Performs the Complete Backup operation while Windows is running The backup operation using Livelmaging may slow down if the hard disk drive is accessed frequently by other applications e System Software Backup This function backs up the system software on to the DVD after the completion of the Complete Backup operation Samsung Recovery Solution Optional s Restor Backup Restore 4 When the system restarts in Restoration Mode the Complete Backup operation begins Continue with the backup by following the instructions When the Restart the System message appears after the backup is complete click OK to restart the system EA If the Livelmaging option has been selected the computer is EA e Samsung Recovery Solution supports the DVD R DVD R not restarted DVD RW and DVD
86. iw Status Indicator Emergency l Ho Eject Button Multi Card Slot Optional Using pas ss Using the card You can use a Card as a removable disk and conveniently 1 Insert the card into the multi card slot in the indicated exchange data with digital devices such as a digital camera digital direction camcorder MP3 etc Using the multi card slot you can read and write data to a SD card SDHC card MMC card SDXC card samsun 4 e Supported Cards SD Card SDHC card MMC Card SDXC Card e You have to additionally purchase a multi card with the k necessar i i i nN Example y capacity depending on your requirements x x S SD Card A e You can use a multi card just like any data storage device A copyright protection function is not supported Since you can lose a card when moving the computer The card drive appears Click Open folder and view files keep the card separately If the window does not appear click Start gt Computer e The figures used for the description are of a representative model Therefore the figures may differ from the real ones e Ifa slot protection dummy card is inserted into your __ Removable Disk F computer remove the dummy card before using the com p ute r Mixed content options These descriptions are written based on Windows 7 the latest operating system Therefore some descriptions and figures may differ from your operating system But as the usage is simi
87. k depending on the 3D external display device connected through HDMI or the software environment Connecting an External Display Device Setting up HDMI TV video Optional If the Desktop screen displayed on the TV does not fit to the TV screen configure it as follows depending on the graphics card Ze e You can view the graphics card type by selecting Device j Manager gt Display adapters and then clicking the symbol e The screen images and terms may differ from actual product depending on the computer model and driver version gt For Intel graphics cards Chapter 2 Using the computer 1 Right click over the Desktop and select Graphics Properties e If a window appears where you can select the mode select Basic Mode and click OK Click Display gt General Settings select Customize Aspect Ratio in the Scaling field fit the Desktop to the TV screen and click OK Intel Graphics and Media Control Panel Display v r General Settings gt gt Multiple Displays Color Enhancement Custom Resolutions Monitor TV Settings Options and Support General Settings Digital Television 1600 x 900 32 Bit 60 Hz Rotate To Normal Customize Aspect Ratio Connecting an External Display Device Chapter 2 Using the computer 3 Resize the Desktop using the resize bars so that the four arrows at the corners of the Desktop are placed in the corners of the TV and then click OK gt For
88. king and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europ ene CE Marking which indicates compliance with the applicable Directives and European standards and amendments identifed below This equipment also carries the Class 2 identifier The following information is only applicable to systems labeled with the CE mark Chapter 5 Appendix This Information Technology Equipment has been tested and found to comply with the following European directives European Directives e EMC Directive 2004 108 EC e Low Voltage Directive 2006 95 EC e R amp TTE Directive 1999 5 EC Manufacturer Information Samsung Electronics Co Ltd 416 Maetan 3Dong Yeongtong Gu Suwon City Gyeonggi Do 443 742 Korea Samsung Electronics Suzhou Computer Co Ltd No 198 Fangzhou Road Suzhou Industrial Park Jiangsu Province 215021 China Tel 86 512 6253 8988 For the web or the phone number of Samsung Service Centre see the Warranty or contact the retailer where you purchased your product Regulatory Compliance Statements European Radio Approval Information for products fitted with EU approved radio devices This Product is a Notebook computer low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz band may be present embedded in your notebook system which is intended for home or office
89. king or moving around Using the 3D function or 3D Active Glasses while moving around may result in an injury due to running into objects tripping and or falling e Take care that your children do not touch or swallow the battery installed in the battery operated 3D glasses Chapter 2 Using the computer ED Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product e Do not apply force to the lenses of the 3D glasses Do not drop or bend the product This may result in a product malfunction e Never disassemble repair or modify the 3D glasses yourself Do not use the glasses when they are out of order or broken e When wearing the 3D glasses take care that you do not bump into other persons e When cleaning the glasses do not spray water or cleaner directly onto the surface of the product This may result in fire or electric shock damage to the product surface or result in the indication labels peeling from the product surface e When you wear the 3D glasses over normal glasses take care of contact between each set of lenses e When you watch 3D content under inconsistent illumination blinking fluorescent fluorescent light 50 60Hz or 3 wavelength light you may notice that the screen flickers Using 3D for 3D models only Q amp A Q1 The 3D glasses do not work A1 A2 A3 A4 Use the 3D active glasses within the operating range o
90. kinnitab Samsung seadme Notebook PC vastavust direktiivi 1999 5 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Hereby Samsung declares that this Notebook PC is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Por medio de la presente Samsung declara que el Notebook PC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE Regulatory Compliance Statements it EAAnVIKh Greek Frangais French Italiano Italian Latviski Latvian Lietuvi Lithuanian Nederlands Dutch Malti Maltese ME THN MAPOY A Samsung AHAQONEI OTI Notebook PC 2YMMOPOONETAI MPO TIX OY IQAEI ANAITH EI KAI TI2 AOINED 2 XETIKE AIATA EI2 TH OAHTIA2 1999 5 EK Par la pr sente Samsung d clare que l appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Con la presente Samsung dichiara che questo Notebook PC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Ar o Samsung deklar ka Notebook PC atbilst Direkt vas 1999 5 EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem iuo Samsung deklaruoja kad is Notebook PC atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas Hierbij ve
91. l view For more detailed information refer to the Windows online help Connecting an External Display Device Connecting through the HDMI port Optional By connecting the computer to a TV with a HDMI port you can enjoy both a high visual quality and a high sound quality After connecting a TV through HDMI you have to configure the screen and sound 1 Connect the HDMI cable to the HDMI port of the TV External Monitor 7 e This is only supported for models that support a TV output port HDMI e When a TV provides more than one HDMI port connect the computer to the DVI IN port e When connecting the computer to a TV switch the external input mode of the TV to HDMI Chapter 2 Using the computer 2 Press the G key combination once Then the Easy Display Manager screen appears where you can select a display device Since pressing the F key while holding down the key changes the selection select a display device HDMI LCD HDMI Clone LCD HDMI DualView EA e External Monitor TV is not supported in the DOS Command Prompt window e If the screen is not switched even if you press the F4 key combination you have to install the Easy Display Manager program e Simultaneous output to LCD CRI HDMI is not supported However the 3D model supports simultaneous output to LCD CRT HDMI 3D mode is available in either LCD or HDMI single screen 3D mode may not wor
92. lar to other Windows operating systems you can use these descriptions for reference Play using Windows Media Player Import pictures ij using Windows View pictures ag using Windows View pictures using Windows Media Center W Speed up my system ee Using Windows ReadyBoost Multi Card Slot Optional 5 Ifa window asking to scan and change appears click Continue Without Scanning This will proceed to Step 2 above 3 You can save move and delete data by double clicking the corresponding drive You can only use the card after formatting it Devices with Removable Storage 2 my DVD Drive E z Removable Disk F 5 The device name of the card drive may differ depending on your computer model Chapter 2 Using the computer Since the above cards are too small you cannot insert the cards into the slot directly Using a Mini SD and RS MMC Insert the card into the dedicated adapter available from most electronic retailers and then insert the adapter into the multi card Slot However depending on the adapter s body material some RS MMC cards may not be recognized properly Samsung recommend that you check the card is recognized correctly prior to purchasing To remove a memory card Take hold of the end of the card and remove the card Multi Card Slot Optional To format a memory card When using the memory card for the first time you must format the card
93. lease contact your network administrator and reconfigure the IP address se Wo Windows 7 Vista Windows XP Chapter 2 Using the computer 6 When APs are found but your computer is not connected to the Internet This is the case when an AP with a weak signal has been set to a high priority Connect to an AP with a strong signal by clicking it Currently connected to AccessPoint Internet access The currently connected AP The signal strength is low Wireless Network Connection An AP with a strong signal strength COM AV CISCO350 B23 WLAN CISCO 1100 G27 CH1 COM AV CISCO1200 B21 alll WLAN ROAMING A COM AV WRT300 G39 ey a Open Network and Sharing Center Windows 7 The currently connected AP The signal strength is low An AP with a strong signal strength Windows XP Sharing Content in a Home Network Easy Content Share Optional Easy Content Share is a DLNA application that allows you to play photos videos and music files on your TV EA e These descriptions are for Windows 7 and for supported models only e The Digital Living Network Alliance DLNA aligns industry leaders in the CE mobile and PC industries through digital interoperability and DLNA certified devices allow users to play videos photos and music files stored on a computer ona IV e To play content using DLNA technology both your computer and TV must be DLNA certified For information on wheth
94. locking the vents as this may be emitted through these holes dangerous 3 Fan Vents i If the vents are blocked the computer may overheat Avoid blocking the vents as this may be dangerous Overview gt For 14 15 6 inch models gt For 17 3 inch models The latch used to remove or install the The latch used to remove or install the battery battery The main memory is installed inside The main memory and hard disk drive the cover is installed inside the cover The hard disk drive is installed inside the cover Turning the Computer On and Off Turning the computer on 1 Install the battery and connect the AC adapter 2 Lift the LCD panel up 3 Press the Power button to turn the computer on LED Chapter 1 Getting Started About Windows Activation When you turn the computer on for the first time the Windows activation screen appears Follow the activation procedures according to the instructions on the screen to use the computer Entering Sleep mode When the computer is turned on press the computer s power button once briefly Adjusting the screen brightness When the computer runs on battery power the LCD brightness is automatically set to low Press the Be key combination to increase the screen brightness Turning the Computer On and Off Getting started gt For Windows Vista Turning the computer off Click on Start gt E and then click on Shut Down as
95. logy not only provides powerful graphics performance but also extends the battery life Optional etc any time through the chargeable USB connection without the charger if you have a gss Enjoy sharper HD images with a brighter LED USB chargeable cable Optional LCD that uses less power e You can easily and quickly read and write data through USB 3 0 Optional Environmentally Friendly Eco Design p Samsung s Proprietary Software e This is an environmentally friendly system E You do not need to wait for a long time to boot designed in accordance with international the computer up because it boots up quickly once you press the Power button Samsung Fast Start Optional RoHS r Compliant environmental specifications regarding the use of environmentally friendly materials and the reduction of hazardous materials e You can resolve problems easily and quickly e The system ensures minimal noise by verifying by using Samsung Recovery Solution program the noise level on the basis of the noise levels to restore the PC to the state when it was of everyday life purchased Optional f Optional items may be changed or may not be provided depending on the computer model Chapter 1 Ti ps Tio Getting Started The internet connection has slowed down or error messages appear continuously while using the The computer is not turning on or does not respond and displays a blank s
96. memory available Product Specifications ponies Registered Trademarks ENERGY STAR Partner Wem As an ENERGY STAR Partner SAMSUNG has bring determined that this product meets the ENERGY STAR guidelines for energy efficiency Samsung is a registered trademark of Samsung Co Ltd Intel Pentium Celeron are registered trademarks of the Intel Corporation Microsoft MS DOS and Windows are registered trademarks of the Microsoft Corporation SiS is a trademark of SRS Labs Inc SRS TheaterSound 3D technology is incorporated under license from SRS Labs Inc SRS TheaterSound 3D provides the most comprehensive audio experience for music movies and games on the PC complete with a dedicated 3D multimedia mode to truly immerse you in your 3D content All other product or company names mentioned herein are registered trademarks of their respective companies Glossary Chapter 5 Appendix The Glossary lists the terminologies used in this User Guide For terminologies other than these look in Windows Help Backup A way to save the current data to restore it later if necessary A backup is a way to restore computer data when the data or computer is damaged Chargeable USB This program enables supplying power to a specific USB port when the system is in power saving mode hibernation mode or off Client This refers to a computer that uses a shared network resource provided by a server
97. ng the computer Function Switches to Sleep mode To wake the computer up press the Power button Shows the remaining battery charge You can only use this function when the Easy Display Manager program is installed Enters the Euro monetary unit symbol This key may not be provided depending on the keyboard type Switches the screen output to the LCD or external monitor when an external monitor or TV is connected to the computer Turns the LCD backlight on or off Mutes or cancels mute Chapter 2 Keyboa rd Using the computer System diagnosis recovery and Internet consultation program Samsung Support Center a Support will be launched Optional Center oil e For some models Samsung Magic Doctor is launched You can select operation mode when you need maximum system performance or low noise low power consumption with one click e Silent Low noise and low power consumption mode e Normal Normal Mode e Speed Maximum performance mode The system operates in its maximum performance and system resources are allocated to Type A di the currently active program with priority for maximum performance Easy SpeedUp Speed Boot Quick booting mode Manager This mode enables quick booting when the booting process has slowed down because multiple programs have been installed You can boot up the computer more quickly by setting the time to execute the SW in the Advanced menu
98. nside of the computer NP Ver 2 6 Safety Precautions A warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Power Related p The power plug and wall outlet figures may differ depending on the country specifications and the product Do not touch the main plug or power cord with wet hands There is a danger of electric shock Do not exceed the standard capacity voltage current of a multiplug or power outlet extension when using it for the product There is a danger of electric shock or fire hazard Chapter 1 Getting Started If the power cord or power outlet makes a noise disconnect the power cord from the wall outlet and contact a service center There is a danger of electric shock or fire hazard Do not use a damaged or loose main plug or power cord or power outlet There is a danger of electric shock or fire hazard Plug the power cord firmly into the power outlet and AC adapter Failure to do so may cause fire hazard Do not unplug the power cord by pulling the cable only If the cord is damaged it may cause electric shock Do not bend the power cord excessively or do not place a heavy object over the power cord It is especially important to keep the power cord out of reach of infants and pets If the cord is damaged it may cause electric shock or fire Safety Precautions Getting Started A
99. nt and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such business other entity or individual The telephone number provided may not be any number for which charges exceed local or long distance transmission charges In order to program this information into your fax machine refer to your communications software user manual Chapter 5 Appendix Canada Unintentional Emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limitesapplicables aux appareils num riques de Classe B prescrites dans le r glement sur le brouillage radio lectrique dict par Industrie Canada Intentional Emitter per RSS 210 If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHzZ 5GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label Chapter 5 Regulat
100. ntact manufacturer for service the wireless device and the body for use of a wireless device near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by Industry Canada This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Regulatory Compliance Statements Telecommunications per DOC notice for products fitted with an IC compliant modem The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operation and safety requirements The Department does not guarantee the equipment will operate to the users satisfaction Before installing this equipment users should make sure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situ
101. nufacturer believes these devices are safe in environments where you are uncertain of the sanction for use Regardless of the power levels care should be taken to to use wireless devices ask the applicable authority for minimize human contact during normal operation authorization prior to use or turning on the wireless device Regulatory Compliance Statements Every country has different restrictions on the use of wireless devices Since your system is equipped with a wireless device when traveling between countries with your system check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country If your system came equipped with an internal embedded wireless device do not operate the wireless device unless all covers and shields are in place and the system is fully assembled Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Please contact manufacturer for service Only use drivers approved for the country in which the device will be used See the manufacturer System Restoration Kit or contact manufacturer Technical Support for additional information Chapter 5 Appendix United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving Do not hold
102. o not walk on the power cord or allow anything to rest on it Do not spill anything on the system The best way to avoid Spills is to not eat or drink near your system Some products have a replaceable CMOS battery on the system board There is a danger of explosion if the CMOS battery is replaced incorrectly Replace the battery with the same or equivalent type recommended by the manufacturer Dispose of batteries according to the manufacturers instructions If the CMOS battery requires replacement insure that a qualified technician performs the task When the computer is turned off a small amount of electrical current still flows through the computer To avoid electrical shock always unplug all power cables remove the battery and modem cables from the wall outlets before cleaning the system Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed The system was dropped or the casing is damaged The system performance changes Chapter 5 Appendix The Instruction On Safety Operation of NotePC 1 When installing and operating devices please refer to safety requirements in the user guide Devices can be used only with the equipment specified in the technical specifications of the devices If any smell
103. of burning or smoke is detected from the computer the unit should be switched off and battery removed The unit should be checked by a qualified technician before reuse Service and repair of devices should be carried out by authorized service centers Do not allow your portable computer to operate with the base resting directly on exposed skin for extended periods of time The surface temperature of the base will rise during normal operation particularly when AC Power is present Allowing sustained contact with exposed skin can cause discomfort or eventually a burn Chapter 5 Replacement Parts and Accessories Appendix Laser Safety All systems equipped with CD or DVD drives comply with the Use only replacement parts and accessories recommended by manufacturer To reduce the risk of fire use only No 26 AWG or larger appropriate safety standards including IEC 60825 1 The laser telecommunications line cord devices in these components are classified as Class 1 Laser Products under a US Department of Health and Human Services 4 Do not use this product in areas classified as hazardous DHHS Radiation Performance Standard Should the unit ever Such areas include patient care areas of medical and dental need servicing contact an authorized service location facilities oxygen rich environments or industrial areas i Laser Safety Note 7 Use of controls or adjustments or performance of Battery Disposal proce
104. ory Compliance Statements Appendix When using IEEE 802 11a wireless LAN this product is restricted to Operation of this device is subject to the following two conditions indoor use due to its operation in the 5 15 to 5 25 GHz frequency 1 This device may not cause harmful interference and 2 range Industry Canada requires this product to be used indoors this device must accept any interference received including for the frequency range of 5 15 GHz to 5 25 GHz to reduce the interference that may cause undesired operation of the device potential for harmful interference to co channel mobile satellite systems High power radar is allocated as the primary user of the 5 25 to 5 35 GHz and 5 65 to 5 85 GHz bands These radar stations To prevent radio interference to licensed service this device can cause interference with and or damage to this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit The maximum allowed antenna gain for use with this device cas antenna that is installed outdoors is subject to licensing is 6dBi in order to comply with the E I R P limit for the 5 25 to 5 35 and 5 725 to 5 85 GHz frequency range in point to point operation Wireless devices are not user serviceable Do not modify o l l them in any way Modification to a wireless device will void Asa general guideline a separation of 20 cm 8 inches between the authorization to use it Co
105. ot touch the antenna with electricity facility such as the power outlet There is a danger of electric shock When handling computer parts follow the instructions on the manual supplied with the parts Failure to do so may cause damage to the product Safety Precautions Getting Started ED Caution Do not place your face close to the Optical Disk Drive tray when it is operating Failure to follow instructions marked with this symbol may cause slight injury or damage to the product There is a danger of injury due to an abrupt ejection Check CDs for cracks and damage prior to use If the computer emits smoke or there is a burning smell It may damage the disc and cause disorder of device and injury of disconnect the power plug from the wall outlet and contact user a service center immediately If your notebook is external amp removable battery type remove the external battery There is a danger of fire Do not use a damaged or modified CD Floppy Disk There is a danger of damaging the product or personal injury Do not insert your fingers into the PC Card Slot There is a danger of injury or electric shock Use recommended computer cleansing solution when cleaning the product and only use the computer when it is completely dried Failure to do so may cause electric shock or fire Emergency disk eject method using paperclip should not be used while the disk is in motion Make sure to use the emergency disk eje
106. ountry s power system USA ONLY e The appliance coupler must meet the mechanical configuration The power cord set wall plug cable and AC adapter plug you of an EN 60 320 IEC 320 Standard Sheet C7 or C5 connector received with your computer meets the requirements for use in for mating with appliance inlet on the computer the country where you purchased your equipment Power cord sets for use in other countries must meet the requirements of the country where you use the computer For more information on power cord set requirements contact your authorized dealer reseller or service provider Regulatory Compliance Statements opani Wireless Guidance As a general guideline a separation of 20 cm 8 inches between the wireless device and the body for use of a wireless device near If fitted with 2 4G band or 5G band the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on and transmitting Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system The following Some circumstances require restrictions on wireless devices section is a general overview of considerations while operating a Examples of common restrictions are listed on the next page wireless device Additional limitations cautions and concerns for
107. our website www samsung com recyclingdirect Or call 877 278 0799 Product Specifications The system specifications may differ depending on the derived models Chapter 5 Appendix For detailed system specifications refer to the product catalogue CPU Optional Main Memory Main Chipset Optional Storage Device Optional Graphics Optional Operating Environment AC DC Rating Optional Intel i3 i15 i7 Core Processor Memory type DDR3 SODIMM Intel HM55 Intel HM65 9 5mmH SATA HDD SSD Intel HD Graphics Internal Nvidia GeForce GT 330M External Nvidia GeForce GT 420M External Nvidia GeForce GT 525M Optimus Nvidia GeForce GT 540M Optimus AMD Radeon HD 6650M External Temperature 5 40 C for storage 10 35 C when operating Humidity 5 90 for storage 20 80 when operating Input 100 240VAC 50 60Hz Output 19VDC 3 16A 19VDC 4 74A 19VDC 6 32A PC Rating Optional 19VDC 3 16A 60W 19VDC 4 74A 90W 19VDC 6 32A 120W E e Optional components may not be provided or different components may be provided depending on the computer model e The system specifications are subject to change without notice e The hard disk drive capacity of a computer in which Samsung Recovery Solution is installed is represented as smaller than the product specification e The amount of memory that Windows can use may be smaller than the actual amount of
108. oving in one direction Cleaning the LCD panel with excessive force can damage the LCD Chapter 3 Settings and Upgrade BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs y Use the BIOS setup to define a boot password change the booting priority or add a new device e Since incorrect settings may cause your system to malfunction or crash take care when configuring the BIOS e The functions of the BIOS setup are subject to change for product function enhancement purposes e The BIOS Setup menus and items may differ depending on your computer model Entering the BIOS Setup 1 Turn the computer on Chapter 3 Settings and Upgrade 2 When the booting screen SAMSUNG logo appears press the F2 key to enter the BIOS Setup a f The screen images in this document may differ from actual product After a moment the BIOS setup screen appears The items in the BIOS setup may differ depending on the product BIOS Setup The BIOS Setup Screen Ze The BIOS Setup menus and items may differ depending on your computer model SysInfo Advanced Security Boot Exit System Time System Date SATA Port 1 SATA Port 2 CPU Vender CPU Type CPU Speed Total Memory Slot 1 Memory Slot 2 Hemory BIOS Version HICOH Version Setup Menu Sysinfo Advanced Security Boot Exit Setup Menu 87 38 20Xx Help lt Tab gt lt Shift
109. p Before configuring a user password a supervisor password must have been configured Deactivating the supervisor password also deactivates the user password In the Set User Password item press lt Enter gt and complete the procedures from Step 3 of Setting a Supervisor Password Setting Up a Boot Password To setup a boot password the administrator password Set Supervisor Password should be set in advance Set the Password on boot item to Enabled Once a boot password is set you have to enter a password to boot up the computer Chapter 3 Settings and Upgrade Setting up a Hard Disk Drive Password Optional If you set a password for a hard disk drive it cannot be accessed from another computer Press lt Enter gt in the Set HDD Password item and define a password as described in Step 3 of the Setting up the Supervisor Password tT e The hard disk drive password setting function is not provided for some models e Changing the hard disk drive password For security purposes you can only change a hard disk drive password after restarting the computer by pressing the computer Power button If you cannot change the hard disk drive password or the HDD Password Frozen message appears when entering the BIOS Setup and then selecting Security gt HDD Password press the Power button to turn the computer on again Setting a Boot Password Deactivating the Password qa p Press lt
110. perated in countries or regions other than those of designated use As a user of these products you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such Regulatory Compliance Statements The European variant is intended for use throughout the European Economic Area However authorization for use is further restricted in particular countries or regions within countries as follows General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power EIRP and the frequency range 2400 2483 5 MHz The low band 5 15 5 35 GHz is for indoor use only Belgium The product may be used outdoors but for outdoor transmissions over a distance of 300m or more a license from the BIPT is required This restriction should be indicated in the manual as follows Dans le cas d une utilisation priv e a l ext rieur d un b timent au dessus d un espace public aucun enregistrement n est n cessaire pour une distance de moins de 300m Pour une distance sup rieure a 300m un enregistrement aupr s de I IBPT est requise Pour une utilisation publiqu
111. ption function refer to the Easy Content Share item in the Troubleshooting Guide After you have set photos videos and music files as shared items you can play them on your TV using your computer In Easy Content Share select the TV you want to use to play content m 5S mM B Playlist Play control panel Add content to play Sharing Content in a Home Network Easy Content Share Optional oo Q Using the computer Adding a video photo or music file to the playlist Playing the content stored on a computer when Easy Content Share is not installed 1 Click Add Content fig in the Playlist screen The shared content list is displayed You can also play the videos photos and music files stored ona computer when Easy Content Share is not installed on your TV 2 In the shared content list check the checkbox in front of the by using Windows Media Player item you want to add to the playlist and then click Add to As described in the steps below configure the content sharing playlist settings to play content on your TV f The computer containing the shared content when Easy Content Share is not installed must be connected to the Same access point to which the computer where Easy Content Share is installed and the TV is connected to gt For Windows Media Player 12 E a9 Add the selected Return to the 1 Run Windows Media Player item to the playlist playlist screen Shared content list Click Stream an
112. puter will be restarted 2 After the computer has been restarted the Partition Setup screen appears To resize the C and D drives adjust the partition size using the slide bar and the click Next 5 The Partition Setup function is only available when the computer is turned on for the first time and will not be available afterwards Once you have completed the partitioning it cannot be resized Partition the disk carefully 3 The Initial Status Backup screen appears To continue the Initial Status Backup click Restart Now The computer will restart 4 The Initial Status Backup is performed to backup the initial status of the C drive to a secure location This backup image is used for the Complete Restore function that restores your computer to the initial status 5 When the Initial Status Backup is complete restart Windows Samsung Recovery Solution Optional Restoring the computer Restore is a function that enables restoring the computer to a saved point when the computer was purchased or a user saved point The Restore function provides the Basic Restore and Complete Restore options When Windows is running Click Samsung Recovery Solution When Windows does not start Turn the computer on and press the g key when the boot screen SAMSUNG logo appears After a moment the computer boots up in Restoration mode and the Samsung Recovery Solution screen appears For computers supporting the
113. r conserve energy Make a plan active by selecting it or choose a plan and customize it by changing its power settings Tell me more about power plans Plans shown on the battery meter S Samsung Optimized amsun g Change plan settings Optimized Power saver Battery life 000009 Change plan settings Performance This mode is appropriate for normal conditions It maximizes the system performance when the computer is running on AC power while maximizing the battery usage time when the computer is running on battery power Samsung Optimized Battery gt For Windows XP Click Samsung Battery Manager U Samsung Battery Manager 2 0 Power Mode Options Help Select Power Mode Max Battery Life Battery Gauge Power saving Effect 98 ___ 2 remaining oa i gt m i LCD Brightness Management LCD Brightness Level LCD Auto dimming AC Maire sc 7 Afer 2 mins DC Detailed Device Setting CPU Speed Maximum Auto Minimum Performance Colorhit Highest 32bit Mediumii Gbit Graphic C Normal Power Saving Power Schemes This mode is appropriate for the environment that requires maximum battery lifetime The Battery Mode system performance may be degraded in this Maximum mode Chapter 3 Settings and Upgrade What is the Power saving Effect This product displays the battery life in each power mode The higher the power saving eff
114. r mode is for people who have difficulty in Silver l hearing gt Advanced Mode Finely tuned 25 presets are arranged on a square according to their relative sound characteristics gt User Mode You can control a variety of sound effects Adjusting the Volume Using SRS TheaterSound 3D Optional The SRS TheaterSound 3D function enables you to experience more stereophonic sound using stereo speakers y e The software programs provider may vary depending on your computer model e In addition some pictures may differ from actual product depending on the computer model and software version 1 Click gy in the system of the Taskbar Then double click the SRS TheaterSound 3D icon y If SRS TheaterSound 3D is disabled right click over the SRS TheaterSound 3D icon and select Enable Process Chapter 2 Using the computer Q 2 If you select an SRS mode you can listen to sound in that mode Options E ome What aro you u D S listening to Onini Music Speaker Type Movie F SRS Mode No SRS Mode Description Select this mode to listen to music Select this mode to watch a movie N Select this to view 3D multimedia content E Precautions when removing the sound driver To remove the driver in Add or Remove Programs remove the SRS Premium Sound Control Panel item e Remove the SRS Premium Sound Control Panel item e Remove the Realtek High Definition Audio Driv
115. rklaart Samsung dat het toestel Notebook PC in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Hawnhekk Samsung jiddikjara li dan Notebook PC jikkonforma mal ti ijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid Dirrettiva 1999 5 EC Magyar Hungarian Polski Polish Portugu s Portuguese Slovensko Slovenian Slovensky Slovak Suomi Finnish Svenska Swedish Chapter 5 Appendix Alul rott Samsung nyilatkozom hogy a Notebook PC megfelel a vonatkoz alapveto k vetelm nyeknek s az 1999 5 EC ir nyelv egy b eldirasainak Niniejszym Samsung o wiadcza Se Notebook PC jest zgodny z zasadniczymi wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 1999 5 EC Samsung declara que este Notebook PC est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE Samsung izjavlja da je ta Notebook PC v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive 1999 5 ES Samsung t mto vyhlasuje e Notebook PC spina z kladn po iadavky a v etky pr slu n ustanovenia Smernice 1999 5 ES Samsung vakuuttaa t ten ett Notebook PC tyyppinen laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen H rmed intygar Samsung att denna Notebook PC star verensst mmelse med de v sentliga egenskapskrav och
116. rvice center for a safety check Using a broken computer may cause electric shock or fire hazard Safety Precautions Getting started A weaning Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality Avoid direct sunlight when the computer is in an air tight location such as inside a vehicle There is a danger of a fire hazard The computer may overheat and also present opportunity to thieves Do not use your notebook PC for long periods of time while a part of your body is making direct contact with it The temperature of the product may increase during normal operation This may result in harming or burning your skin Never disassemble the power supply or AC adapter There is a danger of electric shock When removing the RTC Real Time Clock battery keep it out of the reach of children as they could touch and or swallow it There is a danger of choking If a child has swallowed it contact a doctor immediately Use only authorized parts multi plug battery and memory and never disassemble parts There is a danger of damaging the product electric shock or fire hazard Shut down the computer and disconnect all cables before disassembling the computer If there is a modem disconnect the phone line If your notebook is external amp removable battery type remove the external battery Failure to do so may cause electri
117. s check the Select checkbox Increase the recording volume to increase the recording sensitivity and close the window Click Start gt All Programs gt Accessories gt Entertainment gt Sound Recorder Q Click the Record button to perform recording Sound Sound Recorder E File Edit Effects Help Position Length 0 00 sec 0 00 zec EA The default recording duration of Windows is 60 seconds Download a dedicated recording program from the Internet to record audio data for a long time Adjusting the Volume Using SoundAlive Optional The SoundAlive function enables you to experience more stereophonic sound using stereo speakers 4 e SoundAlive is only supported in Windows 7 e The software programs provider may vary depending on your computer model e In addition some pictures may differ from actual product depending on the computer model and software version 1 Right click over the Volume Control icon i in the notification area at the bottom right of the Desktop and select Playback Devices Alternatively click the Control Panel gt Hardware and Sound gt Sound 2 Right click over the Speakers and select Properties 3 Select the SoundAlive tab and select one of the modes Chapter 2 Using the computer gt Basic Mode Music Select this mode to listen to music Movie Select this mode to watch a movie Speech Emphasizes voice over other sounds Silve
118. s You can register executable files EXE only 4 In the Select the preferred graphics processor for this program O field select High performance NVIDIA processor and click the Apply button Ey NVIDIA Co Fie Edit View 3D Settings Help Back v Advanced Settings v You can change the global 3D settings and create overrides for specific programs The overides will be used automatically each time the specified programs are launched I would like to use the following 3D settings asi Cones A 1 Select a program to customize F Show only programs found on this computer 2 Select the preferred graphics processor for this program Ceen CD 3 Specify the settings for this program Setting Use global setting Off Use global setting Application controlled Use global setting Off Use global setting Off Description Indicates which aranhics nrocessor this nroaram will use For nronrams that require a snecific aranhics nrocessor iQ C The 3D game has been registered Then when the registered 3D game is executed the game is executed by using the external graphics chipset Connecting an External Digital Device a ee You can save a file stored on a device onto the computer by 2 The Auto run window appears Click Open folder and view connecting a digital device such as a camera camcorder or mobile files phone to the computer and using
119. s the same as the scroll area of the Touchpad Place two fingers over the touchpad and move the fingers as If you place two fingers over the Touchpad and move them up follows to rotate the photo or image down left or right the screen is scrolled up down left or right accordingly Or Or Page Move Function You can move to the previous or next page when you are looking at a photo or surfing the Internet For example if you lightly brush three fingers to the left while you are looking at a web site you will return to the previous page Zoom Functions If you place two fingers over the Touchpad together or apart the current image or text is Zoomed in or out Touchpad Setting the Touchpad Sensitivity If the touchpad reacts too sensitively or the pointer moves unintentionally please adjust the touchpad pointer speed and Sensitivity Adjusting the Touchpad Pointer Speed Click Start gt Control Panel gt Hardware and Sound gt Mouse gt Pointer Options and then adjust the pointer speed Adjusting the Touchpad Palm Detection Function The palm detection function is to avoid malfunctions when the palm touches the touchpad by mistake EA This function is provided by the touchpad driver provided by the manufacturer Chapter 2 Using the computer Click Start gt Control Panel gt Hardware and Sound gt Mouse gt ELAN gt Options gt PalmTracking and then adjust the sensitivity
120. sabling the WOL Wake on LAN option 100Mbps 10Mbps speed Connecting a wired LAN while using a wireless LAN may not activate the lt Wake On LAN gt function Set the Wireless LAN to Disable to use the lt Wake On LAN gt function lt Wake On LAN gt feature may not work while using Hybrid power saving feature Zw For Win7 Wake On LAN is not supported by Ping i 4 When connected to a 100Mbps 1Gbps wired LAN and the computer exits Sleep hibernation mode a message appears informing you of a connection to a 1OMbps 100Mbps wired LAN This happens because when the computer exits standby hibernate mode restoring the network takes about 3 seconds When the network is restored it operates at 100Mbps 1Gbps Wireless Network Optional A wireless network Wireless LAN environment is a network environment that enables communicating between multiple computers at home or a small size office through wireless LAN devices EA e The descriptions below are for computer models with ji a Wireless LAN card or device A Wireless LAN device is optional The pictures in this manual may differ from the actual product depending on your wireless LAN device model e Ifthe wireless LAN is turned off press the Fy key combination to turn it on Chapter 2 Using the computer EA What is an Access Point AP An AP is a network device that bridges wired and wireless LANs and corresponds to a wireless hub in a wired ne
121. service center before connecting the device There is a danger of damaging the product Safety Precautions Chapter 1 Getting Started E Caution Causes that may damage the data of a hard disk drive and the hard disk drive itself Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Cautions on Preventing Data Loss Hard Disk Management Take care not to damage the data on a hard disk drive e A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk e Take extra care because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive e The data may be lost when an external impact is applied to the disk while disassembling or assembling the computer e The data may be lost when the computer is turned off or reset by a power failure while the hard disk drive is operating e The data may be lost and irrecoverable due to a computer virus infection e The data may be lost if the power is turned off while running a program e Sudden impact or movement to the computer while the hard disk drive is operating may cause files to be corrupted or bad sectors on the hard disk To prevent data loss due to damage to the hard disk drive lease back our data frequently e The company is not liable for any loss of data on the hard disk 7
122. ses there is a danger of burning yourself Work while keeping your waist straight Use a chair with a comfortable back Keep the center of your leg weight not on the chair but on your feet when you are sitting on a chair To use the computer while talking over the telephone use a headset Using the computer with the phone on your shoulder is bad for posture Keep frequently used items within a comfortable work range where you can reach them with your hands Proper Posture During Computer Use Getting started Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least Keep your arm at a right angle as shown by the figure 50cm e Keep the line from your elbow to your hand straight e Adjust the height of the monitor and the LCD screen so that its ae Do not place your palm over the keyboard while typing top height is equal to or lower than your eyes e Donot hold the mouse with excessive force e Avoid setting the monitor and LCD excessively bright l e Do not press the keyboard touchpad or mouse with excessive e Keep the monitor and LCD screen clean lore If you wear glasses clean them before using the computer Itis recommended connecting an external keyboard and e When entering contents printed on a paper into the computer mouse when using the computer for long periods of time use a Static paper holder so that the height of the paper is almost equal to that of the monitor
123. should consult the dealer or an experienced radio television technician for additional suggestions The user may find the following booklet helpful Something About Interference This is available at FCC local regional offices Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company The correction will be the responsibility of the user Use only shielded data cables with this system Intentional emitter per FCC Part 15 If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label Chapter 5 Appendix This device is restricted to indoor use due to its operation in the 5 15 to 5 25 GHz frequency range FCC requires this product to be used indoors for the frequency range 5 15 to 5 25 GHz to reduce the potential for harmful interference to co channel Mobile Satellite systems High power radars are allocated as primary users of th
124. shown in the figure below to shut the computer down A e Since the procedures to turn the computer off may differ depending on the installed operating system please turn Connect To the computer off according to the procedures for the Switch User Control Panel Log Off purchased operating system Lock Default Programs e Save all your data before clicking on Shut down Restart gt All Programs Help and Support If Samsung Fast Start is installed the system shutdown tart Search Clam ule location may differ 1 Power Button 2 3 gt For Windows 7 Click Start 3 gt Shut down mode il to shutdown the EA Using the Power button in Windows Vista computer iy For Windows Vista the Power button is set to power saving mode Therefore if you click Start gt Power button EOW the computer enters power saving mode sj Solitaire Default Programs To shut down the computer by clicking this icon refer to the descriptions for Setting up Start menu power button of the Control Panel Help and Support gt All Programs Turning the Computer On and Off gt For Windows XP Click the Start button on the taskbar Click Turn Off Computer Ba Log Orr oy Turn OFF Computer 2 Click Turn Off Cancel E If the system cannot be shut down due to a system error turn it off by pressing and holding the Power Button for a minimum of 4 seconds Please note that turning the computer off by this metho
125. specific countries are listed in the specific country sections or country group B l sections The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label If the country you will be using the wireless device in is not listed please contact your local Radio Approval agency for requirements Wireless devices are closely regulated and use may not be allowed Radio frequency wireless communication can interfere with equipment on commercial aircraft Current aviation regulations require wireless devices to be turned off while traveling in an airplane 802 11ABGN also known as wireless Ethernet or Wifi and Bluetooth communication devices are examples of devices that provide wireless communication e In environments where the risk of interference to other The RF field strength of the wireless device or devices that may devices or services is harmful or perceived as harmful be embedded in your notebook are well below all international the option to use a wireless device may be restricted or RF exposure limits as known at this time Because the wireless eliminated Airports Hospitals and Oxygen or flammable devices which may be embedded into your notebook emit less gas laden atmospheres are limited examples where use energy than is allowed in radio frequency safety standards and of wireless devices may be restricted or eliminated When recommendations ma
126. t Usage Related Do not place a candle light cigar etc over or on the product There is a danger of fire Use a wall outlet or multi plug with a grounding part Failure to do so may cause electric shock hazard Make sure to have the product tested by a safety service engineer after repairing the product Authorized Samsung Repair Centers will carry out safety checks after a repair Using a repaired product without testing it for safety may cause an electric shock or fire In case of lightning immediately turn the system off disconnect the power cord from the wall outlet and phone line from modem Do not use a modem or phone There is a danger of electric shock or fire Do not use your computer and AC Adapter on your lap or soft surfaces If the computer temperature increases there is a danger of burning yourself Chapter 1 Getting Started Connect only permitted devices to the connectors or ports of the computer Failure to do so may cause electric shock and fire Close the LCD panel only after checking if the notebook computer is turned off The temperature may rise and it may cause overheating and deformation of the product Do not press the Eject Button while the Floppy Disk CD ROM drive is in operation You might lose data and the disk might be suddenly ejected and could cause an injury Take care not to drop the product while using it This may cause personal injury or loss of data Do n
127. t a display device to a port that provides the better visual quality A Before you start check the port and cable of the external ai Pane nea anions So anes ADI display device and then connect the display device to the computer e Due to restrictions of the operating system the DualView function is not supported for Windows 7 Starter Connecting an External Display Device a ee Connecting to the monitor port Press the G key combination once Then the Easy You can experience a wider screen by connecting the computer to Display Manager screen appears where you can select a a monitor TV or projector with a monitor port display device You can give better presentations by connecting the computer to Since pressing the F key while holding down the key a projector changes the selection select a display device 1 Connect the RGB port of the computer and the port of the monitor or TV with the monitor cable 15 pin LCD External TV Monitor CRT LCD CRT Clone Tt ET LCD CRT DualView EA e Ifthe screen is not switched even if you press the Connect the power cord of the connected monitor TV or 4 Fe key combination you have to install the Easy projector and turn the power on Display Manager program Alternatively to set up dual view Open the Display Settings window in the Control Panel select Monitor 2 and select the Expand to fit to this monitor checkbox to set dua
128. tes the system from Sleep mode when a signal such as a ping or magic packet command arrives over the network wired LAN 1 gt For Windows 7 Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center and click on Change adapter settings in the left menu pane gt For Windows Vista Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center and click Manage Network Connections in the left menu pane gt For Windows XP Click Start gt Control Panel gt Network and Internet Connections gt Network Connection 2 Right click on the Local Area Connection and select Properties Chapter 2 Wired Network Using the Ona Q 3 Click Configure gt Power Management tab Select Allow this device to bring the computer out of standby then click OK Restart the system When system is running on battery some time it takes about 20sec after inserting LAN cable to be able to connect to internet This symptom happen as a result of power saving feature to reduce battery consumption If the system wakes up from Sleep mode even though there y P is no received signal use the system after disabling the lt Wake On LAN gt function When system is running on battery the Wired LAN speed is decreased automatically to reduce battery consumption The LAN LED may not be turned off if System is shoutdown In such case a 1Gbps 100Mbps LAN would function at without di
129. that provides across diverse interconnected networks gt For Windows XP Click General tab and select a LAN driver from Connect using Select Internet Protocol TCP IP and click Properties y e The Network Component name may differ depending on the Operating System Installed e To add a network component click Install in the screen shown in the figure above You can add clients services and protocols Wired Network 5 Configure the IP settings When using DHCP select Obtain an IP address automatically To use a static IP address select Use the following IP address and set the IP address manually Internet Protocol Version 4 ICP IPv4 Properties 2 ie You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings A Obtain an IP address automatically Use the following IP address IP address Subnet mask Default gateway Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server E Validate settings upon exit EA When not using DHCP ask your network administrator for the IP address When you have completed the settings click the OK button The network settings have been completed Chapter 2 Using the computer Q Using the WOL Wake On LAN function lt Wake On LAN gt is a function that activa
130. the file management functions If the window does not appear click Start gt Computer Connecting and using a camera or camcorder _ Removable Disk F If a digital device such as a camera or camcorder is connected with iad the computer it is recognized as a removable disk so that you can oo copy or move the files on the device ED sr vindons meda Payer i Import pictures alj using Windows View niaii 1 Connect the USB port of the notebook computer and the RO Wi ae Media Center USB port of the digital device such as a camera using the USB ip Mayai Ca b e i Open folder to view files P using Windows Explorer Speed up my system mee using Windows ReadyBoost EA Both the computer and the digital device must be turned On Double click the corresponding drive You can then save move or delete data e You have to additionally purchase the USB cable necessary to connect the computer and the device 3 Devices with Removable Storage 2 a DVD Drive E Removable Disk F The device name of the card drive may differ depending on the model Adjusting the Volume rans Q You can adjust the volume using the keyboard and the volume control program Using the Sound Recorder The procedures to record sound using the Windows Recorder are described below Adjusting the Volume using the Keyboard Bol Alternatively press the FF key combination to turn the volume on or off
131. touch screen function the touch screen function does not work during Restore Mode In this case please use the touchpad or mouse Chapter 4 Backup Restore 2 If the initial menu screen appears click Restore jes Samsung Recovery Solution mei kh a Samsung r Recovery Solution To view the troubleshooting method for each symptom click Select by Symptom Select by Symptom Ai Backup System Software If you move the mouse pointer over a button you can view a brief description a la A If you click Select by Symptom the Select by Symptom menu appears If you select a symptom a recommended restoration option will blink Click the restoration option to continue Samsung Recovery Solution Optional packup Restore 112 Select either Basic Restore or Complete Restore from the In the Advanced menu you can change the size of the hard Restore menu drive partitions e g C and D To restore the computer to the initial state click Computer Initial State and perform the restoration process according to the instructions that appear on the screen e Make sure to backup your data in advance as all data will be deleted after the partition size is changed e The Advanced menu is only activated when the computer boots up in the restoration area Samsung Recovery Solution x A Samsung my Recovery Solution Complete Restore by pressing the
132. touchpad off when a USB mouse is connected In case of some touch screen model checking option locks touchpad even though you did not connect a USB mouse EA This auto locking function is not provided for some models CD Drive ODD Optional Using eane An optical disk drive is optional and may differ depending on When the CD tray opens insert a CD or DVD and push the your computer model For detailed specifications refer to the tray in until it clicks catalogue Ea Do not insert a cracked or scratched CD Otherwise the CD may break and damage the optical disk drive when the CD rotates at a high speed e When you clean a CD or DVD title wipe with a soft cloth from inside to outside e Insert a Mini CD into the center of the CD drive e The figures used for the description are of a representative model Therefore the figures may differ from the real ones lt I lt a SS e Using a CD that is not in the shape of a circle is not recommended Inserting and Ejecting a CD Push the CD tray inward until it clicks 1 Press the Eject button of the optical disk drive at the side of The CD drive status indicator is turned on the computer 5 ACD drive s reading and writing speed may differ j depending on the condition and type of the media e To eject a CD when the CD drive does not work or the computer is off place the end of a paper clip gt into the Emergency Hole until the CD tray is ejected l
133. twork Connect the computer with the wireless LAN function to the AP to use to the network connection Connecting to a Wireless LAN If there is an AP you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows gt For Windows 7 1 If you click the Network Connections 9 icon in the system tray a list of available APs appears If you select an AP to connect to the Connect button appears Not connected afl Connections are available Wireless Network Connection Wireless Network Optional Click Connect If a network key is set for the AP enter the network key and then click Connect zZ For the network key please ask your network administrator Mot connected aiil Connections are available Wireless Network Connection R4 COM_19F Connect automatically ELBRUSAP9 Open Network and Sharing Center 3 When Connected to the AP is displayed click the Close button You can access the network Chapter 2 Using the computer gt For Windows Vista Right click over the Network Connections icon on the taskbar and click Connect to the Network Connect to a network Turn on activity animation Turn off notification of new networks Diagnose and repair Network and Sharing Center Select an AP to connect to and click Connect If there is a configured network key for the AP to connect to enter the network key and then click the Connect button
134. upport a replacement or refund and if our service engineer visits you due to this problem a service charge will be applied Chapter 1 Getting Started About the Product Capacity Representation Standard About HDD Capacity Representation The capacity of the storage device HDD SSD of the manufacturer is calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation E g For a 80GB HDD Windows represents the capacity as 74 5GB 80x1 000x1 000x1 000 byte 1 024x1 024x1 024 byte 74 505GB In addition the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may reside in a hidden area of the HDD Before You Start About Memory Capacity Representation The memory capacity reported in Windows is less than the actual capacity of memory This is because BIOS or a video adapter uses a portion of memory or claims it for further use E g For 1GB 1 024MB memory installed Windows may report the capacity as 1 022MB or less For more information refer to the Samsung Recovery Solution section Chapter 1 Getting Started Safety Precautions For your security and to prevent damage please read the following safety instructions
135. use This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices CeO Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration Number and the Alert Symbol is on the system label The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R amp TTE directive The low band 5 15 5 35 GHZ is for indoor use only See 802 11b and 802 11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below esky Czech Dansk Danish Deutsch German Eesti Estonian English Espa ol Spanish Chapter 5 Appendix EU R amp TTE Compliance Statements Samsung t mto prohla uje e tento Notebook PC je ve shod se z kladn mi po adavky a dal mi p slu n mi ustanoven mi sm rnice 1999 5 ES Undertegnede Samsung erkl rer herved at f lgende udstyr Notebook PC overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Hiermit erkl rt Samsung dass sich das Ger t Notebook PC in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschl gigen Bestimmungen der Richtlinie 1999 5 EG befindet K esolevaga
136. vriga relevanta best mmelser som framgar av direktiv 1999 5 EG Regulatory Compliance Statements lenka H r me l sir Samsung yfir v a Notebook PC ilcelandic er samr mi vi grunnkr fur og a rar kr fur sem ger ar eru tilskipun 1999 5 EC Samsung erkl rer herved at utstyret Notebook Norsk i inenweaianl PC er i samsvar med de grunnleggende krav og J vrige relevante krav i direktiv 1999 5 EF Bu belge ile Samsung bu Notebook PC nin T rkiye 1999 5 EC Y netmeli inin temel gerekliliklerine T rk e ve ilgili h k mlerine uygun oldu unu beyan eder To view the EU Declaration of Conformity for this product in English only go to http www samsung com uk support download supportDownMain do then search the model number of the product If the Declaration of Conformity for the model you are interested in is not available on our web site please contact your distributor Chapter 5 Appendix European Economic Area Restrictions Local Restriction of 802 11b 802 11g Radio Usage Note to integrator The following statements on local restrictions must be published in all end user documentation provided with the system or product incorporating the wireless product E Due to the fact that the frequencies used by 802 11b 802 11g wireless LAN devices may not yet be harmonized in all countries 802 11b 802 11g products are designed for use only in specific countries or regions and are not allowed to be o

Samsung NP-RF510E User Manual (XP/Vista/Windows7)

Contents

Download Pdf Manuals

Related Search

Related Contents