Home

Samsung NP-G15 User Manual

1. F1 Press to view the Setup Help Up amp Down Keys t 4x Press to move up and down F5 F6 F5 F6 Xt dk Press to change the item value F9 i Press to load the default Setup settings Esc ESC 232 Enter Enter Press to select an item or to enter a sub menu F10 F10 Press to save the changes and exit Setup Setting a Boot Password When setting a password you have to enter a password to use the computer or enter the BIOS Setup By configuring a password you can restrict system access to authorized users only and protect data and files saved on the computer Before You Start Do not lose or forget your password If you have forgotten your password contact a Samsung service center In this case a service fee will be charged Setting a Supervisor Password 3 Enter a password press Enter re enter the I CL password for confirmation and press Enter again A Supervisor Password is required to turn the computer The password can be up to 7 alphanumeric on or to start the System Setup characters Special characters are not allowed When setting a Supervisor Password users other than a supervisor cannot use the computer Set Supervisor Password Enter New Password 1 Select the Security menu in the BIOS Setup Confirm New Password In the Set Supervisor Password item press lt Ente
2. E Captured Images Images I Created Viewing an Image not registered to the Library Click File gt Open select an image file to view and click Open The selected image file is registered to the Library and displayed in the Image Viewer window Viewing an Image in full screen or through a Slide Show Click the Full Screen M amp T button or SlideShow Ej button below the Image Viewer window To return to the Image Viewer window press the lt Esc gt key or double click the screen Watching a Slide Show while listening to Music To watch a slide show while listening to music play music from MUSIC Station and run SlideShow Setting an Image as the Background Click the Set as Background qm button below the Image Viewer window The selected image is set as the Desktop background Editing an Image You can change the shape of an image edit an image or apply special effects to an image The image editor functions are described below 1 Select an image to edit in the Image Viewer window and select the Image Editor tab The Image Editor screen appears The Image Editor screen consists of an Image Workspace window and 3 Tool tabs JY AVStation premium File Edit Yiew Tools Help MUSIC PHOTO MOVIE Edit Image n All Images z a Captured Images Images I Created CreatureD4 EP Edit Tool Tabs Zoo
3. Ey Is AA ae 7 JE ACIE JE e E MET Nu AN JOR TEE at 2 Shortcut Keys You can use the following functions by pressing the keys below with the Fn key Esc E F2 F3 F4 F5 F6 EZ F8 F9 F10 F11 F12 P Help BIO Xt ny d gt a Y S Fn Name Function Esc REST Switches to Sleep mode To wake the computer up press the Power button 2 Sleep Mode P id Euro Enters the Euro monetary unit symbol gt This key may not be provided depending on the keyboard type 7 Switches the screen output to the LCD or external monitor when an external monitor or TV is BIO CRT LCD connected to the computer E p 54 x Backlit Turns the LCD backlight on or off 7 od Mute Mutes or cancels mute TER Samsung Magic System diagnosis recovery and Internet consultation program Samsung Magic Doctor will be E Doctor launched You can select operation mode when you need maximum system performance or low noise low power consumption with one click Easy SpeedUp m Silent Low noise and low power consumption
4. Welcome to Microsoft Windows XP Professional the new version of Windows that brings your PC to life Experience the best Experience Windows XP Windows XP really delivers Just click a link on the right to experience Windows XP for yourself simplified m the fresh strearr acquainted with cH Safe and Easy Personal Computing Windows XP makes personal computing easy and enjoyable Power performance a I t new look and plenty of help when you indows XP has it all along with unmatc security EM Unlock the World of Digital Media Unlock the exciting world of digital media a het Enjo music videos computer games The Connected Home and Office Share files photos music even a printer and Internet connection all on a network that is ee Best for Business With Wi eric nce and even greater reliability NNi Mieracaft Carnaration fm xD Picture Card I Internet Ay Introduction Micros o Ly L a ay EN 10 51 PM Click the title Help and Support Help and Support allows you to view the features and usage of Windows Also it allows you to search the information you want by entering a search keyword Click Start gt Help and Support Search Enter a search keyword to view the Help Or alp and Support Center LG Back Q M f 3 Index Sir Favortes 2 History Help and Support Center Windows XP Media Center Edition 2004 Pick a Help topic Ask for
5. While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW cm2 may be exceeded at distances close to the antenna installed Therefore the user must maintain a minimum distance of 20cm from the antenna at all times This device can not be colocated with another transmitter and transmitting antenna This Statement is not applicable to UMPC Ultra Mobile PC such as PDA Portable PC FCC Part 68 If fitted with a modem device This equipment compiles with part of the FCC rules On the back of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the telephone company This equipment uses the following USOC jacks RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant See Installation Instructions for details The REN is used to determine the quantity of devices which may be connected to telephone line Excessive RENS on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line
6. i Wireless Network Connection Network TEIE Choose a wireless network 9 Refresh network list Click an item in the list below to connect to a wireless network in range or to get more information E LI 2 Set up a wireless network samsung w For a home or small office me lt Security enabled computer to computer network Related Tasks d Learn about wireless networking de Change the order of preferred networks gi Change advanced settings Select the wireless network name e g samsung specified in Connecting to computer to computer networks peer to peer or ad hoc on page B 74 and click Connect 3 Enter a cryptographic key in the network key box and C lick Connect Wireless Network Connection The network samsung requires a network key also called a WEP key or WPA key A network key helps prevent unknown intruders From connecting to this network Type the key and then click Connect Network key Confirm network key Connect Cancel If the network key is not configured in Connecting to computer to computer networks peer to peer or ad hoc on page S 74 just click Connect without any keystrokes When connected to the wireless network the system displays Connected in the selected network of the Network Connection window Checking the connection status Move the mouse pointer over the Wireless Network Connection m3 icon on the t
7. Never disassemble the power supply or AC adapter There is a danger of electric shock When removing the RTC Real Time Clock battery keep it out of the reach of children as they could touch and or swallow it There is a danger of choking If a child has swallowed it contact a doctor immediately Use only authorized parts multi plug battery and memory and never disassemble parts There is a danger of damaging the product electric shock or fire hazard Upgrade Related Shut down the computer and disconnect all cables before disassembling the computer If there is a modem disconnect the phone line If you are using a notebook computer make sure to remove the battery Failing to do so may cause electric shock Custody and Movement Related Follow the instructions for the relevant location e g airplane hospital etc when using a wireless communication device wireless LAN Bluetooth etc 10 Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product Installation Related Do not block the ports holes vents etc of the product and do not insert objects Damage to a component within the computer may cause electric shock or fire When using the computer with it lying on its side place it so that the vents face upwards Failing to do so may cause the internal temperature of the computer to rise and the computer to ma
8. Headphones and Speakers Check your volume first to listen to music VOLUME Click your E volume B m Check if the volume is too loud before using headphones m itis not recommended using headphones for long periods of time Use Time Break Time m lake a break for 10 minutes or more after a 50 minute period when working for more than one hour 17 Illumination m Do not use the computer in dark locations The illumination level for computer use must be as bright so for reading a book m indirect illumination is recommended Use a curtain to prevent reflection on the LCD screen Operation Condition m Do not use the computer in hot and humid locations m Use the computer within the allowed temperature and humidity range specified in the User Guide Important Safety Information Safety instructions Your system is designed and tested to meet the latest m Openings in the computer case are provided for standards for safety of information technology equipment ventilation Do not block or cover these openings However to ensure safe use of this product it is important Make sure you provide adequate space at least 6 that the safety instructions marked on the product and in inches 15 cm around the system for ventilation when the documentation are followed you set up your work area Never insert objects of any kind into the computer ventilation openings EH Always follow these instructions to help guar
9. My Documents e Internet Explorer 2 My Recent Documents gt e E mail Outlook Express N j pr e My Pictures V MSN e My Music z My Computer Windows Media Player ee Control Panel 33 Windows Messenger Set Program Access and Start Menu The menu from which you can launch programs A porre Pin Wizard OQ nee You can drop useless C earch E files and folders here Defaults All Programs gt EN English United Kingdogaid 5 La n g u ag e B a r n EE Switches text input language Start button Taskbar System Tray with Clock Press the start button Currently running programs are Shows some running program icons The Start menu appears displayed here Icons not being used are hidden If you click the arrow mark on the left you can view hidden icons Start Menu The menu from which you can launch programs Click Start The Start menu appears Alternatively press the Windows key on the keyboard Items that are pined e SAMSUNG to the Start menu a Bus GSA periments My Documents folder User account name ET L My Recent Documents Outlook Express e My Pictures vI MSN e My Music Windows Media Player 3 dd My Co m p ute r Je contrat Panel Control Panel Al P rog rams 33 Windows Messenger Se ceiuDram oye and Defaults e Tour Windows XP ee Printers and Faxes Files and Settings Transfer Wizard Help and Support Help and Support een Search Enn Run Freq
10. Newcknonessiy e Wireless network key This network requires a key for the following Network Authentication Open Data encryption E Network key Confirm network key Key indes advanced 1 he key is provided for me automatically This is a computer ta computer ad hoc network wireless access points are not used To prevent a network connection from an unauthorized user it would be better to configure a network key encryption key A network key consists of 5 13 alphanumeric characters e g magic or of 10 26 hexadecimal numbers ahexadecimal number is represented by numbers 0 to 9 or letters a to f Check that the configured network name e g samsung is in the Preferred networks item and click OK Wireless Network Connection Properties AE General Wireless Networks Advanced Use Windows to configure my wireless network settings Available networks To connect ta disconmect from or find aut more information about wireless networks in range click the button below View Wireless Networks Preferred networks Automatically connect to available networks in the order listed below gt samsung Automatic Move up Move d own Learn about setting up wireless network configuration n II ces Step 2 Connecting to the configured computer 1 Right click on the Wireless Network Connection m icon on the taskbar and select View Available Wireless Networks
11. Panda Kaspersky Ahnlabs AhnLab Visit the Microsoft Web site www microsoft com regularly to check the latest list Product Specifications The system specifications may differ depending on the derived models For detailed system specifications refer to the product catalog Intel Core Duo Processor CPU Intel Core2 Duo Processor Intel Celeron M 009090000009900000900000000090900000090009090000090009090000900909000000000000090000000909090900000090000090000000000900009009090000000000009090000000090000000090000009009000000990900090090000000090900000900000009090900000000000000000000000000090909000000000000000000000909009000000000000000900000009000009999 000009000009900009000000900009090000009000902929000000000000900000000000900000090000900090000009000000000000000900000090000000900000000000000000000009900000000000000000000900000000090000000000009000000000090000000000000000000009000000900000000090000009000000000000000029290000000000000099 Main Memory 512 2GB Max 4GB Memory type DDR2 SODIMM Main Chipset ATI RS600ME SB600 Hard Disk Drive 26 1mmH 3 5 7200rpm SATA2 HDD ODD DVD ROM RW Combo DVD Super Multi we de RE xii Radson Xpress 0 ihipa mm Graphics iu Nvidia G72M G73M Memory 128 256MB External BUDE E inte a ld un E E uec comp i uud puse LM Fax Modem V 92 Network Wired LAN Realtek RTL8100C L 10 100 Wireless LAN 802 11BG USB 2 0 x 5 Video monitor and TV Out S VID
12. Telecommunications per DOC notice for products fitted with an IC compliant modem The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operation and safety requirements The Department does not guarantee the equipment will operate to the users satisfaction Before installing this equipment users should make sure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should make sure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas The Ringer E
13. a disk or connect a device with this kind of file 23 DWD movie What do you want Windows to do e Play DVD Video using Windows Media Player F Copy Disc or Play Movie Y using PowerStarter Open folder to view files using Windows Explorer EN Always do the selected action 3 If the DVD movie does not start immediately Click Start gt All Programs gt CyberLink DVD suite gt Power DVD gt CyberLink PowerDVD 94 Click Play from the CyberLink skin menu The DVD movie starts to play Play Configuration Detailed Instruction For detailed instruction click Start All Programs gt Cyberlink DVD Suite gt Power DVD gt PowerDVD Help DVD region code information Each DVD Video disc contains one or more region codes denoting the areas of the world in which distribution and playback are intended The commercial DVD player specification dictates that a player must only play discs that contain its region code The default region code of DVD drive is set to blank Every time you insert a DVD title for your new product The region code of DVD drive changes corresponding to the inserted DVD title Changes to the region code of DVD drive are limited to the first five times and the last inserted DVD title finally defines the region code of DVD drive If you already have changed the region code more than five times please call for further assistance Services charges may apply in this case Sams
14. p 42 Caps Lock This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down Num Lock This turns on when the Num Lock key is pressed and numeric keypad is activated z p 42 Power This shows the computer operating status Green When the battery is fully charged or the battery is not installed Amber When the battery is being charged Off When the computer is running on battery power without being connected to AC adapter Right View 5 Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen 3 TV Antenna Jack Connect TV antenna here 4 CD Drive 4 Modem Port Plays CD or DVD titles A port to which a telephone cable is Since an ODD drive is optional the installed drive connected to in order to dial up to the depends on the computer model E p 47 Internet 2 AV Input Port Connect the output cable of external AV equipment VCR camcorder etc here v 7 USB Port 6 Multi Card Slot You can connect USB devices to the A card slot that supports Memory Stick USB port such as a keyboard mouse Memory Stick Pro SD Card MMC digital camera etc MMC Plus and xD cards Headphone Jack 1 TV Output Port A jack used to connect the A port used to connect a TV to headphones display the computer screen on the TV S Video Support 4 Microphone Jack A jack us
15. password sequence account type and picture User Accounts User Accounts Learn About 3 User Accounts Related Tasks What do you want to change about your 2 User accounts Manage my network passwords 2 User account types ee ees ade account a Sand Gears P i C k a t as k lt ange another accoun Create a new account Change my name SAMSUNG MEE Computer administrator Change an account Learn About Create a password 2 Deleting your own account Create a new account 2 Switching users Change my picture 3 Using a NET Passport Change the way users log on or off Change my account type or pick an account to change EJ Set up my account to use a NET Passport Loa SAMSUNG Guest he Computer administrator e Guest account is off To Delete User Account 1 Click Start gt Control Panel gt User Account Select the user account to be deleted and click Delete Account Q The administrator account cannot be deleted It can only be renamed or disabled How to Switch a User 1 Click Start gt Logoff 2 Click Switch User Log Off Windows El Switch User Log Off Cancel er Click the user name to be switched from the Welcome screen Then you can log on with a new user name Changing Resolution and Color A resolution is the number of pixels displayed on the Click Settings and change the resolution and color screen If you set the resolution to a higher value items on the
16. 3 107 1 Move to MUSIC Station and double click All Music 2 Double click a music file The file is added to the playlist and played SV AVStation premium File Edit view Play Tools Help 1 All music J Symphony No 9 Scherzo A Highway Blues 4 Home of the Future 5 Mask English L olao sndrec 5 Symphony No 9 Scherzo A Highway Blues 4 sndrec L focus L newalert A newemail online 5 type Blip 000000 o MOVIE mj ules uses LE AAAA ES ln 106 Play a Track not registered to the Library Click File Open select a music file to be played and click The selected track is registered to the Library and played Creating My Playlist My Playlist is a personal album with which you can collect manage and play your favorite music files For the procedures to create My Playlist see the descriptions of MUSIC Station in Help Adding Music Files to the Library MUSIC Library is a library holding music files used by MUSIC Station The procedures to add music files saved on the computer to the Library are described below You can add files and folders or search and add files As an example the procedures to add a folder are described below Click the Register a File AEM button below the Library and click Add by Folders AAAA my 107 Select a folder which included music files and click OK The music files in the folder are added t
17. 32 hexadecimal digits or 16 ASCII characters 2 Right click the wireless LAN configuration Key index Select the current encryption key index program Gil on the Taskbar and select Open used by the access point from between 1 to 4 sis a Using an encryption key Enter 5 for 64 bit or 13 Ather lient Utility NETOS edlen SHE for 128 bit alohaNumeric characters represented Alternatively click Start gt All Programs gt Atheros by 0 9 a z or A Z Client Utility Atheros Client Utility 6 Click OK and then OK again in the Profile 3 In the Profile Management tab click Scan to search Management window for available wireless networks If the profile is created the profile appears in the list in the Profile Management tab and the connection is established using the profile Select the name of an access point AP to connect to from the network name SSID and then click Activate Using Samsung Network Manager Samsung Network Manager guides you to configuring the network related settings Samsung Network Manager performs the features as shown below m Easy configuration for your network and printer 5E p 80 81 m Enabling the movement free feature E p 82 If you use a computer in different places such as your office and home Configure network settings in each place Then you can select a location and use the computer without giving extra effort for network settings each time m Easy Internet configuration
18. 34 T Touchpad 44 U User Accounts Switch User 67 M Video Play 115 Volume Control 43 We Windows XP 60 Wired Network 71 Wireless Network T4 Contact SAMSUNG WORLD WIDE U S A U K AUSTRALIA HONG KONG MALAYSIA SINGAPORE Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products contact the SAMSUNG customer care center Customer Care Center TEL Web Site it rcu n Oak oa RN E MODUSAMEUNG DUE eee IE 2 uu ee LAAEN 20 MM AIT PATERE MEER Se MEM MM o Deer cT Cu One AE nee EEN 775 mm MEM SIENTE EE ar D 775005 MM E e ot CAROLE m TRITT T M c FRANCE Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung veuillez contacter le Service Consommateurs Samsung Customer Care Center TEL Web Site 0909000000909000000009090000000000000000090000000000000000000000000000000000009000000000000000000000000000000000000000900000000000000900009000000000000000000000000000000000000000000000000000009000000000000000000000000000000000000000000000000900000009000000000000000000009 FRANCE 0825 08 3260 www samsung com fr GERMANY Kontakt zu Samsung Falls Sie Fragen oder Anregungen zu Samsung Produkten haben wenden Sie sich bitte an den Samsung Kundendienst Customer Care Center i 1 GERMANY 01805 121213 www samsung de 090900000090990
19. Click Start gt Control Panel gt Network and Internet Connections gt Network Connection gt Local Area by using the right button of the touch pad and click Properties Select Internet Protocol TCP IP and click Properties 3 Select the Alternate Configuration tab select User configured and fill in the fields 4 When the setting completes click OK Wireless Network A wireless network allows computers to share resources or an internet connection without using LAN cables between them Before Use You can set a network by using Samsung Network Manager as well E p 80 This description is applied only to the models equipped with wireless LAN cards or devices You can set a wireless network by using Samsung Network Manager as well E p 80 A wireless LAN device is optional when purchasing Click a symbol from Start gt Control Panel gt Performance and Maintenance gt System Hardware Tab Device Manager Network Adapter to check the device type Some of the pictures shown in this description may vary depending on the wireless LAN device Press the Fn FJ key and enable the wireless LAN features to use wireless LAN Once the wireless LAN is enabled the wirelss LED turns on Types of Wireless LAN Connections a Small Office Network The small office network interconnects computers The types of wireless LAN connections are as follows where wireless LAN is enabled wirelessly and is called T
20. Click an item in the list below to connect to a wireless network in range or to get more Refer to Sharing Internet Access on page 3 82 l naai x Set up a wireless network tQ Test for a home or small office 2g Security enabled wireless network WPA aiii You can connect by completing the following steps Related Tasks QD Testi J Learn about wireless amp Security enabled wireless network WPA uil networking m Step 1 Set up a computer to computer network on a DL C O m p ut e r preferred networks m Step 2 Connect to the configured computer from other computers i Change advanced settings Step 1 Setting up a computer to On the Wireless Network tab click Advanced computer network 4 Right click on the Wireless Network Connection E icon on the taskbar and select View Clear Automatically connect to non default network Available Wireless Networks check box if it is selected Select Computer to u computer ad hoc networks only and click Close ee Change Windows Firewall settings Open Network Connections Repair View Available Wireless Networks 5 In the Wireless Networks tab click Add Enter the network name e g samsung and 6 unselect The key is provided for meautomatically Enter the encryption key in the Network key field and click OK Wireless network properties Association Authentication Connection
21. E p 83 Enables the feature that allows two computers to share an Internet using one Internet line Sets one computer as the sharing server and the other computer as the client to use the Internet in both computers m Easy check up for the network connection status E p 88 Perform Network Settings You can set up a wired network or wireless network Click Start gt All Programs gt Samsung gt Samsung When different networks are used in different places you Network Manager Samsung Network Manager must set up the network environment for each place The 3 Click Add progress of configuration is displayed while the network is being set up If you use a wired LAN connect the LAN cable to 1 the wired LAN port Press the Fn Pl key and enable the wireless LAN features to use wireless LAN Once the wireless LAN is enabled the wireless LAN LED turns on Select an icon to choose the network location and enter the location name for example Home and click Next 5 Select Internet Direct Connection and click Next Add Location 2 Select the Internet connection type Select the Internet connection type p I Sharing Server C Sharing Client C Sharing Client Wireless Wired 6 Select a device and configure IP settings Then click Next Add Location 3 Internet Connection Device Setting Please enter IP address after choosing connection device Choose Device C
22. Hole Eject Button Status Indicator When the CD tray pops out insert a CD or DVD until dete Burning a CD If your computer has a writable CD drive you can write data onto a CD or DVD or burn an audio CD CyberLink DVD Suite is supplied with the System Software Media or an additional CD so that you can burn a CD using the program Install the provided software and use the software functions referring to the software help 3 Push the CD tray inward until it clicks The CD drive status indicator is turned on ACD drive s reading and writing speed may differ depending on the condition and type of the media To eject a CD when the CD drive does not work or the computer is off place the end of a paper clip into the Emergency Hole until the CD tray is ejected Multi Card Slot Using the multi card slot you can read and write data to a Memory Stick Memory Stick Pro SD card MMC MMC Plus and xD card You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera digital camcorder MP3 etc Before You Start a A multi card slot is optional and is provided for some models only You have to additionally purchase a multi card with the necessary capacity depending on your requirements You can use a multi card just like any data storage device A copyright protection function is not supported Since you can lose a card when moving the compu
23. Menu Wireless LAN AP Connection Procedures To use a wireless LAN first connect to a wireless LAN AP and then you can access the network even when moving location moving location and then you can access the network even when connecting to a wireless LAN AP 1 Right click over the Wireless Network Connection icon on the Taskbar and click View Available Wireless Networks 2 Click Search AP from the Wireless menu to search for wireless LAN APs Select an available wireless network e g SAMSUNG and click the Connect button For information on available wireless LAN APs ask your network administrator Available AP Connect 3 The network key security key input window appears If anetwork key has been set for the wireless LAN AP enter the network key and click the Connect button For the network key information ask your network administrator If no network key has been set for the wireless LAN AP click the Connect button without entering the network key 4 When the computer is connected to the wireless LAN AP the Connected message will appear on the Wireless Network icon in the Taskbar Using the network after moving location By setting the network settings IP address printer setting etc for each location you can immediately access the network without performing the network setting procedures regardless of your location 1 Run Samsung Network Manager when connected to the Intern
24. Q launched a game right after installing it and the game is not executed A This problem may occur when the game is not compatible with Windows XP Launch the game again and it will be executed properly Q Lac Key combination does not work A While displaying video of VCD or MPEG or the display setting is Dual View you cannot toggle display devices Also the installation of NetWare Client 32 program disables the function of Fn Ciis While playing a game pressing the Fn Lc keys does not work or the screen is not properly displayed A Some games and 3D application programs may change the display device control Therefore pressing the Fn La keys may terminate the running program or may display an abnormal screen Press the Fn 5 keys before launching a program and do not press them while running the program Q running speed of a game is too slow or fast A Change the setting of Power Schemes to Always On Click Start Control Panel Performance and Maintenance gt Power Options gt Power Schemes tab then configure the Power schemes field to Always On Some part of a game image is not displayed or is displayed in black A This may happen when running a game designed for DirectX 8 1 such as NHL 2003 MVP Baseball 2003 etc Qin game screen is displayed small A nVidia Graphics This may happen when the display settings are set to zoom out mode Use
25. a short time This only applies to nVidia graphics card Click the Graphics Related tab Change Resolution Change Display Device Remove the AC Adapter Restart the System Change PowerMizer level A This may happen while the video driver is examining the connected device While detecting any connected display devices may blink or some noise may occur When I connect a projector and change the setting to display screen image on both the LCD and the projector by pressing Fn keys screen is not displayed properly A Press Fn l ai keys once again If the same problem continues it means the projector cannot support the resolution Lower the resolution to 1024 x 768 Qi playback screen of a DVD title or an MPEG file is only displayed on the LCD This only applies to nVidia graphics card A Video is displayed on a single display device by default when LCD and CRT are selected simultaneously Right click over the Desktop and select Properties from the pop up menu Q Inthe Display Properties window select Settings tab gt Advanced gt Ge Force Go xxxx tab Select the Full Screen Video menu gt Full Screen Video Control item set the full screen device to Auxiliary Display and then click the Apply button Then you can view video on both the LCD and CRT display devices Qi Taskbar on the bottom of the screen does not appear when a projector is used as the display device A A This may
26. as determined by total RENs contact the local telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the Telephone Company will notify you in advance that temporary discontinuance of service may be required But if advance notice is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with this equipment Modem for repair or warranty information please contact your local distributor If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product No repairs may be done by the customer 26 This equipment cannot be used on public coin phone service provided by the telephone company Connection to party line service is subject to state tariffs The Telephone Consumer Protection Act of 1991 make
27. center output Change the settings as follows to fit the game screen to the LCD Screen Q Right click over the Desktop and select Properties from the pop up menu Q Inthe Display Properties window select the Settings tab gt Advanced gt Ge Force Go 6600 tab In the Digital Flat Panel Settings field select Display adapter scaling and click the Apply button Intel Graphics Q Right click the Desktop and select Properties from the pop up menu Q Inthe Display Properties window select the Settings tab gt Advanced gt Intel Graphics Media Accelerator Driver for Mobile tab Select the Display Device menu and click Notebook in the Single Display field Select the Display Setting menu click Full Screen in the Extended Display field and click the Apply button Qi game play screen frequently stops and Game play is not displayed smoothly on the starts screen A nVidia Graphics A For 3D games the texture data for the 3D screen display is saved to the system memory If there is insufficient system memory the data is saved to the hard disk drive and loaded to memory when This may occur when the PowerMizer Setting is set to Maximum Power Saving Function or Balanced Right click the Desktop and select Properties from required This operation may temporarily stop the pop up menu displaying the picture on the screen inthe Display Properties window select the In this case lower the game resolution o
28. ext rieur de b timents une licence de l IBPT est requise Pour les enregistrements et licences veuillez contacter l IBPT France For Metropolitan departments 2 400 2 4835 GHz for indoor use 2 400 2 454 GHz channels 1 to 7 for outdoor use For Guadeloupe Martinique St Pierre et Miquelon Mayo tte 2 400 2 4835 GHz for indoor and outdoor use For Reunion Guyane 2 400 2 4835 GHz for indoor use 2 420 2 4835 GHz for outdoor use channels 5 to 13 European Telecommunication Information for products fitted with EU approved modems Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999 5 EC Such marking is indicative that this equipment meets or exceeds the following technical standards CTR 21 Attachment requirements for pan European approval for connection to the analogue Public Switched Telephone Networks PSTNs of TE excluding TE supporting voice telephony services in which network addressing if provided is by means of Dual Tone Multi Frequency DTMF signaling Although this equipment can use either loop disconnect pulse or DTMF tone signaling only the performance of the DTMF signaling is subject to regulatory requirements for correct operation It is therefore strongly recommended that the equipment is set to use DTMF signaling for access to public or private emergency services DTMF signaling also provides faster call s
29. for use only in specific countries or regions and are not allowed to be operated in countries or regions other than those of designated use As a user of these products you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such The European variant is intended for use throughout the European Economic Area However authorization for use is further restricted in particular countries or regions within countries as follows General European standards dictate maximum radiated trans mit power of 100 mW effective isotropic radiated power EIRP and the frequency range 2400 2483 5 MHz Belgium The product may be used outdoors but for outdoor trans missions over a distance of 300m or more a license from the BIPT is required This restriction should be indicated in the manual as fol lows Dans le cas d une utilisation priv e a l ext rieur d un b timent au dessus d un espace public aucun enregis trement n est n cessaire pour une distance de moins de 300m Pour une distance sup rieure 300m un enregis trement aupres de l IBPT est requise Pour une utilisation publique l
30. happen even though SXGA LCD supports the 1280x1024 mode the projector does not support that mode In this case change the resolution to 1024x768 recommended on your computer Switching the MS DOS command prompt to full screen mode or Windows mode by pressing the lt Alt gt lt Enter gt keys does not operate properly A Pressing the lt Alt gt lt Enter gt keys using an USB keyboard may cause the key input to be recognized as multiple key inputs depending on the keyboard input recognition time In this case the MS DOS command prompt is repeatedly switched to full screen and then to Windows several times Please press the lt Alt gt lt Enter gt keys more quickly or press the lt Alt gt lt Enter gt keys using the system keyboard Qin the shortcut key on the keyboard does not show the Samsung Display Manager icon A The Samsung Display Manager icon only appears when both the Magic Keyboard and the Samsung Display Manager program are installed cannot set up Dual View properly For Intel Graphics only A This may happen when Clone mode is selected for an external monitor Press the lt Fn gt lt F4 gt key combination to select LCD and try to set up Dual View again The screen is rotated but cannot return it to the original orientation A This may happen when you have used the screen pivot function or pressed a wrong key while using the computer For Intel Graphics press the lt Ctrl gt
31. mode 3 M Normal Normal Mode vali ud m Speed Maximum performance mode The system operates in its maximum performance and system resources are allocated to the currently active program with priority for maximum performance y Wireless LAN Turns the wireless LAN function on or off in models with wireless LAN capability Mu au rere keane P When using an external mouse only you can turn the Touchpad off B Num Lock Turns the numeric keyboard on or off m Scroll Lock If you tum the Scroll Lock on you can scroll the screen up or down without changing the cursor location in some applications Screen Brightness Control To adjust the LCD brightness press the Fn Lt J key combination or the Fn E key combination The changed screen brightness is displayed at the center of the screen for a moment Volume Control To control the volume press the Fn L amp key combination or the Fn E key combination You can mute the sound or cancel the mute function by clicking the Fn E key combination Numeric Key The numbers are printed in blue on the numeric keys If Num Lock is turned on by pressing the Fn a key combination you can use the numeric keys to enter digits Other Function Keys m Application Key Performs the right click mouse function touchpad m Internet Explorer Quick Launch Key a Launches Internet Explorer Touchpad The touchpad provides the same function as a mouse
32. on either Standard Installation To remove the sound driver due to a problem or for or Custom Installation then the 3 components of an update follow the procedures below the sound driver are automatically installed If you do not follow the sequence below the sound driver may not be removed or the reinstalled driver or may not work properly Select Start gt Control Panel gt Add or Remove Programs Q Remove Samsung EDS first Remove SoundMAX and restart the computer Installing the Sound Driver after a Windows XP Reinstallation If you install the sound driver after reinstalling Windows XP the Add Hardware Wizard Modem Device window may appear during the sound driver installation This happens because the High Definition Audio KB888111 Hotfix which has been installed on your system has changed the settings to search for both sound and modem devices If you install the modem device this message will not appear If necessary install the modem device together Q The number of the High Definition Audio KB888111 Hotfix may differ if you have updated the Hotfix from the Microsoft web site Modem Related Q cannot hear the modem sound A1 Check that the telephone line is properly connected to the modem A2 Check that the modem driver is installed properly e Click Start gt Control Panel gt Performance and Maintenance gt System Select Hardware tab Device Manager M
33. remove hardware or update a device driver using the Device Manager Direct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed Since the operating speed of graphics memory and sound cards must be very fast to provide high quality video and sound for games Direct X enables faster control and interaction between applications and hardware devices By using Direct X the multimedia performance of Windows has been hugely improved Driver Software that interacts between the hardware and the operating system An operating system knows the hardware information and controls the hardware In general a driver is supplied with the corresponding hardware device DVD Digital Versatile Disk DVD was developed to replace CD compact disk Although the shape and size of the disc are the same as that of a CD the capacity of a DVD is at least 4 7GB while the capacity of a CD is 600MB DVD video is digital unlike VHS analog video and supports MPEG2 compression and digital audio To play a DVD a DVD drive is required Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off When canceling Hibernation Mode all application programs that were running are restored to th
34. replaced incorrectly Replace the battery with the same or equivalent type recommended by the manufacturer m When the computer is turned off a small amount of electrical current still flows through the computer To avoid electrical shock always unplug all power cables remove the battery and modem cables from the wall outlets before cleaning the system m Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed The system was dropped or the casing is damaged The system performance changes mo The Instruction On Safety Operation of NotePC 1 When installing and operating devices please refer to safety requirements in the user guide 2 Devices can be used only with the equipment specified in the technical specifications of the devices If any smell of burning or smoke from the computer 3 the unit should be switched off and battery removed The unit should be checked by a qualified technician before reuse 4 Service and repair of devices should be carried out by authorized service centers Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer oxygen rich environments or industrial areas Battery Disposal To reduce the risk of fire use only No
35. screen will be displayed smaller and the screen looks wider than the pervious As color quality gets higher more colors can be represented Click Start gt Control Panel gt Appearance and Themes gt Change the screen resolution Display Properties Themes Desktop Screen Saver Appearance Settings Drag the monitor icons to match the physical arrangement of your monitors 1 Plug and Play Monitor on Mobile Intel R 345 Express Chipset Fa 5 Lolor quality Move the slider bar to set the resolution device as the primary monitor Extend my Windows desktop onto this monitor Apply quality Then click OK You can select a graphic chip set Click the pull down menu button to select the number of colors you want It is recommended to set the resolution and color quality depending on the LCD type of your computer as the following LCD Type Resolution Color Quality 1280 x 1024 Strongest 32 bit Chapter 4 Using the Network Wired Network Wireless Network Connecting to Wireless LAN Connecting to computer to computer networks peer to peer or ad hoc Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Perform Network Settings Using the network after moving location Sharing Internet Access Checking Network Status Connecting with a Modem 71 714 T5 76 1 8 80 80 83 84 88 89 Wired Network A wired network is a network envir
36. the network key input window will appear Enter the network key in the input window and click OK i Wireless Network Connection Network Tas Choose a wireless network A Refresh network list Click an item in the list below to connect to a wireless network in range or to get more information 2 Set up a wireless network e SAMSUNG For a home or small office Related Tasks d Learn about wireless networking ve Change the order of SOL39 RG1000 64 preferred networks tf y Change advanced 5g Security enabled wireless network settings For a network key contact the network administrator 3 Once Connected to AP is displayed you can use a wireless network To check the network connections Place the mouse on the Wireless Network Connection icon qz from the Taskbar Then the status will appear Wireless Nebwork Connection t WWW Speed 11 0 Mbps Signal Strength Excellent Status Connected m Sis ATi Connecting to computer to computer networks peer to peer or ad hoc In computer to computer wireless networks you can 2 Click Change the order of Preferred Networks wirelessly connect 2 or more computers that have wireless LAN modules Using this method a computer that is not connected to the Internet can share the Internet i Wireless Network Connection Choose a wireless network Fi Network Tasks by accessing another computer connected to the Internet i Refresh network list
37. 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000099 Antenna Type Built in Antenna 2 EA Main Aux The data rate may differ from the real data transmission rate 11g mode is only supported when the device is connected to an IEEE 802 11g device e g Access Point supporting IEEE 802 119 Registered Trademarks Samsung is a registered trademark of Samsung Co Ltd SENS is a registered trademark of Samsung Electronics Co Ltd Intel Pentium Celeron are registered trademarks of the Intel Corporation Microsoft MS DOS and Windows are registered trademarks of the Microsoft Corporation Memory Stick and Corporation All other product or company names mentioned herein are registered trademarks of their respective companies are trademarks of the Sony Macrovision Certification This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited About the Product Capacity Representation Standard The capacity of the storage device HDD SSD of the manufacturer is
38. 26 AWG or larger telecommunications line cord Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer Follow all local regulations when disposing of old batteries THERE IS ARISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 20 To reduce the risk of fire use only No 26 AWG or larger telecommunications line cord Do not use this product in areas classified as hazardous Such areas include patient care areas of medical and dental facilities Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards including IEC 60825 1 The laser devices in these components are classified as Class 1 Laser Products under a US Department of Health and Human Services DHHS Radiation Performance Standard Should the unit ever need servicing contact an authorized service location tv Laser Safety Note Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure To prevent exposure to laser beams do not try to open the enclosure of a CD or DVD drive Class 1M laser radiation when operating part is open Do not view directly with optical instruments Class 3B invisible laser radiation when open Avoid exposure to the beam Connect and Disconnect the AC adapte
39. 802 11BG Card Atheros Wireless Network Adapter Device B The Name of the Registered Equipment Special Low Power Wireless Device for Wireless Data Communication Systems Item Detailed Specifications Dimensions 59 75 X 44 70mm Width X Height Physical Operating Specifications Temperature And Temperature Bet 0 C and 70 C Humidity Less than 95 Humidity Sleep Mode 70mW Power Receive Mode 0 825W Specifications n Transmission Mode 1 25W Power 3 3V Compatibility IEEE 802 119 IEEE 802 11b Operating System Microsoft Windows XP Vista Network P siis E NOD on Wonder OENE N EANNA NESE Specifications Huc EM protean CSMA CA Collision Avoidance with Acknowledgement ACK Security Wired Equivalent Privacy support WEP 64bit 128bit WPA CCX This device supports the Wireless LAN Security Specifications WPA Wi Fi Protected Access for Wi Fi To connect to a WPA wireless network you have to configure the settings according to the network connection environment For detailed setting information ask your network administrator B Radio Specifications RF Band 24GHz m ae 20000 Sm EREMO EROR ie EEELLL 000000 9000000000000000000000000000000000090000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
40. 90900000909009090000009000000009000900000909009090000009090000000090090000009090000009009000000990000090000000000000909000090000000000090090000000000090000900900000000000900000090090000000000000000000000000090009000000000090000090900000000000000000000000000009000090900000009090090009009 0 14 EUR Min aus dem Festnetz der T Com SPAIN Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos por favor contacte con nuestro Servicio de Atencion al Cliente Customer Care Center TEL Web Site 900000009090909090000090900900000000900900000009090000009000900900000900900000000000000900000000090009009000090000000000000009000009090000009000090090900000090000000000009000090000000900000000909000000000000000000000000090000900000000009000000000000000000000900000900000092000009000000000000000909 SPAIN 902 10 11 30 www samsung com es ITALY Contatta SAMSUNG Se hai commenti o richieste sui prodotti Samsung contatta il nostro Servizio Clienti Customer Care Center TEL Web Site 90000000900009000000000000000000000009000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000909 ITALY 199 153 153 www samsung com it RUSSIA UKRAINE CBz3biBalTece c SAMSUNG no BceMy mupy EcnM y Bac ecrb npegnnoxeHMs UNV BOTIpOCbl rio riponykraM Samsung CBs3bIBalTTecb C W
41. Complete without following the instructions in the wizard If the Do you want to move to the added location now window appears click No If the icon for the added location appear it means that the client configuration is complete If you click Yes the computer connects to the sharing server and you can immediately use the Internet To connect to the Internet from the Sharing Client 1 Check if the sharing server turns on because this is mandatory If you connect to the sharing server through a wireless LAN the wireless LAN of the server must be turned on Run Samsung Network Manager on the sharing client computer Click the icon for the location that has been set as the sharing client in the Shared Location window and click Go Once a message appears to inform you that moving is complete you can use the Internet If the Internet is disconnected during use click Wireless menus gt Reconnect Sharing in Samsung Network Manager Then the network will be connected again Checking Network Status If the network connection is not available you can easily When the diagnosis is complete out of order devices find the causes by checking the network status are marked by the exclamation mark icon For detailed device status read the description in the 1 Run Samsung Network Manager lower part of the window Reconnect and set up the device according to the diagnosis result fj SAMSUNG Network Manager 2 Clic
42. EO Headphone Microphone Modem Wired LAN DC Jack pole Security Lock Port AV In TV Antenna EL sane E E E Medii LCD 17 SXGA 1280x1024 Weight 4 95Kg May differ depending on the specification Lo RAUM om Wempersiure 8 40 6 for siorage 10 82 6 when operating Environment Humidity 579076 for storage 20 8076 when Operating ess tt BS 100 240VA ttt Frequency 50 60Hz 090090900000009000000990000000000900000900090000090900000009000000000000009000000000000090090000090000000090000000000000000000000009000000000000000090000000000000900000000000000900000000000000000000000000000000000000090000000000000090909000000000000000000000009000000900000000000000000000009999 00000900000909009000090000900000900000000090090000009090000900900000000900000000000900000000009000000000000009000000900000000900000000000009000000000090000000000000090000000000000000000000000009000000000090000000000000000000009000000900000000090000009000000000000000009290000000000000099 Output Voltage 19VDC The mark represents optional components Optional components may not be provided or different components may be provided depending on the computer model The system specifications are subject to change without notice The hard disk drive capacity of a computer in which Samsung Recovery Solution II is installed is represented as smaller than the product specification Wireless LAN Specifications
43. G15 G16 User Guide Chapter 1 Getting Started Product Features Before You Start Contents Safety Precautions Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off oO Oo 0 N 15 18 20 22 32 33 33 34 35 36 37 38 39 39 39 Product Features Much More Excellent Performance than Notebook Computer Bright and Sharp 17 Inch Wide LCD Spacious Large Capacity Storage Low Noise Low Heating Wireless LAN Support More Efficient Space Utilization than a Desk Top Computer m Space Saving and Tidy Line Arrangement m All in One type that does not need additional connecting m Easy to Move The items marked with this symbol are optional items that are supported depending on the computer model Before You Start Before reading the User Guide first check the following information User Guide Information This product is supplied with an Installation Guide and a User Guide You can even more easily and conveniently use the computer by using any of the guides depending on your needs Installation Guide This guide is provided so that you can conveniently refer to this guide when using the computer for the first time af
44. HODOpDMaLIMOHHBIM LIeHTDOM Samsung Customer Care Center TEL Web Site USE een gt M ee t ge USEM ce non E eee CHINA E 5 8 5 inmixpm ger GgEBmdgRiig WRASSE Customer Care Center TEL Web Site 0990000000900000000009000000090000000000090000090000000000000000000900000000000000090900900000090000000000900000009090000000900000009000000900000000000000000000000000000000000090090000000000000000090900090009000000090000000000000000000000000000000909092000000909000000900000090090000099 CHINA 800 810 5858 010 64751880 www samsung com cn THILAND aciaditustsiiuatci Andatuau lad winfienuunimiadassdti Anuna Aedasaunui fi SAMSUNG customer care center Customer Care Center TEL Web Site THAILAND 1800 29 3232 02 689 3232 www samsung com th Rev 1 3
45. Phone and Modem Options In the Modems tab select the installed modem and click Properties In the Modem tab of the Modem Properties window clear the Wait for dial tone before dialing check box O00 When the configuration is completed click OK Q A1 A2 How do I use my modem when dialing from overseas Check that the modem is correctly configured according to the current country Because the values for communication may differ according to the country you may not be able to connect via the modem due to an incorrect modem configuration Click Start gt Control Panel gt Network and Internet Connections Under See Also click Phone and Modem Options In the Dialing Rules tab click Edit o Q In the General tab in the Edit Location window select the current country from the Country region radio box specify the Area code and click OK Because the shape of the telephone plug may differ according to the country you have to purchase and use the appropriate telephone plug for that particular country Q A How do I receive a fax while the system is in power saving mode Rest mode To receive a fax in Standby mode you have to set it up as follows The automatic fax reception function of the fax program needs to be activated For more information see the corresponding fax program manual Q Click Start Control Panel Network and Internet Connections Under
46. SP2 checks the Firewall the automatic updates configuration and installation of virus checking programs to display a Windows Security Alert icon on the right part of the Taskbar when it judges that the computer is vulnerable to attacks from the Internet In this case check the following to install the necessary components A1 Set up the Windows Firewall When you set up the Windows Firewall you will be protected from unauthorized access through the Internet or the network Click Windows Firewall in Start gt Control Panel gt Security Center Manage security settings for Q From the General tab of Windows Firewall select ON recommended If you want to allow a certain program or service to gain access to your computer using the Firewall select and check the program or service that you want to allow access from in the Exceptions tab of the Windows Firewall If you want to add a program to Programs and Services click Add Program and select it A2 Set up Windows Automatic Updates A3 A4 This automatically downloads and installs critical updates via the Internet to keep your computer up to date Click Automatic Updates in Start gt Control Panel gt Security Center gt Manage security settings for Q From general tab of Automatic Updates window select Automatic recommended Keep your computer current with the latest virus updates ex Norton Antivirus Even when you have installed Norton An
47. SUNG logo appears press the F2 key to enter the BIOS Setup F2 SETUP F12 PXE Boot ESC Boot Menu phoenix 3 After a moment the BIOS setup screen appears The items in the BIOS setup may differ depending on the product Setup Menu Security Boot Main Advanced Item Specific Help Help System Time System Date Hard Disk Optical Disk CPU Type CPU Speed Total Memory Slot1 Memory Slot2 Memory Graphics Memory BIOS Version MICOM Version Setup Items 10 21 53 01 01 2006 xxx GB CD ROM DVD XXXXXXXXXX x xx GHz xxx MB xxx MB Not Installed Auto Shared XXXXXXXX XXXXXXXX lt Tab gt lt Shift Tab gt or lt Enter selects field Help for the selected item appears automatically The BIOS Setup Screen Main Advanced Security Boot Exit Item Specific Help System Time 10 21 53 System Date 01 01 2006 lt Tab gt lt Shift Tab gt or Enter selects field Hard Disk xxx GB Optical Disk CD ROM DVD Menu Description pum j WEUNIFOUHEPUHEARHSENEI UNAM PUE M M M peso y ovd 2 se em pan o Bi m Im HOFFE pem MINUM EA i diaa a a wade ee A e sm RENI NUM i I v o ood W l j erbe E IPAE semen AEA EEEE ON E MM IEN E A MENU Exit Used to exit the Setup either saving the changes or not System Setup Keys In the Setup you have to use the keyboard
48. See Also click Phone and Modem Options Inthe Power Management tab of the Modem Properties window select the With this device exit the computer from stand by mode item and then click OK The above setting enables the modem to turn on the system and receive a fax when in power saving mode Wired LAN Related Q aware On LAN gt function A1 Wake On LAN is a function that activates the system in rest mode when a signal such as ping or magic packet commands arrives from network wired LAN To use Wake On LAN function Q Select My Network Places gt View network connections from the Desktop Q Click the right button on the touchpad over Local Area Connection and select Properties amp Click Configure and select Power Management tab Select Allow this device to bring the computer out of standby then click OK Restart the system When turning the computer off when the network is connected without selecting the Wake On LAN function the LAN LED may not be turned off The Wake On LAN function is only available when the LAN is turned on When connecting a wired LAN while using a wireless LAN the Wake On LAN function may not work To use the Wake On LAN function select Do not use Wireless LAN Connecting wired LAN while using wireless LAN may not execute Wake On LAN function Configure wireless LAN to Disable to use Wake On LAN function Click My Ne
49. Set a recording reservation and click the Next button Confirm the recording reservation settings and click the Finish button If a recording reservation is set the recording reservation name appears in the TV Recording Reservation folder of the TV Library If a recording reservation is added set the computer to Standby mode rather than switching the computer off as the reservation is not performed if the computer is switched off In addition if there is insufficient free space on the hard disk drive the recording reservation will fail Playing a Recorded TV Program You can play a recorded TV program from the TV and MOVIE Stations 1 Double click the Recorded TV folder of the TV Library 2 Double click a recorded TV file The recorded TV is played and play control buttons appear below the TV viewer window Recorded TV folder of the MOVIE Station Library by double clicking it Q You can also play a recorded TV program in the om Watching Video from an External Video Device As an example watching video from a camcorder is described below To watch video from an external video device you have to connect the computer and the external video device using the AV input cable and configure the country and input signal settings Playing a Video Device You can watch video from a video device connected through the Composite or S Video port on the TV Station of AVStation premium EH Some computers do not su
50. SubNetMask T C gt DNS Server Choose Device Select between wired LAN and wireless LAN IP Settings Contact the network administrator and enter the IP information if the IP is not an automatic IP Get IP Automatically Select this option and perform automatic IP settings if you use DHCP When the Printer Setting window appears click Finish To add a printer click Add Printer The Add Printer Wizard appears Set up theprinter according to the instructions displayed on the screen When the printer has been added click the Show printer button select the newlyadded printer and then click the Finish button To not add a printer select No Default Printer and then click the Finish button When the network setting is complete the Do you want to move to newly added location now message appears If you select Yes the network settings for the added location are applied When the network settings for the added location are applied the added place and the corresponding network connection information is displayed in The detailed Information for window When the network setting is complete an icon for the added location is created within the Saved Locations window Now you can use the Internet or add a new network location Sj SAMSUNG Network Manager Manage Wireless Help The detailed Information for Cy House _Location List Remove Saved Locations Current Place Information
51. USA ONLY This Perchlorate warning applies only to primary CR Maganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate 32 Overview Before You Start m The items marked with this symbol are optional items which may be changed or may not be provided depending on the computer model m The actual color and appearance of the computer may differ from the pictures used in this guide 4 LCD Latch This latch is used to open and close the LCD panel To open the LCD panel slide the latch to the right and then lift the LCD panel up 6 LCD The screen images are displayed here 7 Status Indicators Shows the operating status of the computer The corresponding operating LED is lit when the corresponding function operates z p 34 3 Power Button Turns the computer on and Keyboard off amp p 39 9 Key A device to enter data by pressing the keys z p 41 4 Touchpad Touchpad Buttons The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons z p 44 33 Status Indicators n m E E 34 Wireless LAN This turns on when the wireless LAN is operating Hard Disk Drive This is lit when the hard disk drive is operating Scroll Lock This turns on when the Scroll Lock key is pressed and screen scroll is locked E
52. X This connection uses the following items iei Client for Microsoft Networks B File and Printer Sharing for Microsoft Networks Il QoS Packet Scheduler JEg tenet Protocol TCP IP Description Transmission Control Protocol Interet Protocol The default wide area network protocol that provides communication across diverse interconnected networks C Show icon in notification area when connected Configure IP settings Select Obtain an IP address automatically when using DHCP If you use a static IP select Use the following IP address and enter the values Internet Protocol TCP IP Properties General Alternate Configuration Y ou can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server l te DNS server If the IP of your computer is not automatically assigned contact the network administrator T If all settings are made click OK Now the network configuration is finished Using both DHCP and a fixed IP simultaneously Using the Alternate Configuration providing by Windows XP you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet
53. a Boot Password Changing the Boot Priority Upgrading Memory Using the Security Lock Port 118 119 119 121 123 125 126 128 Chapter 7 Appendix Using McAfee SecurityCenter Using Samsung Magic Doctor Diagnosing the System Reinstalling Software Running the system software Media Installing drivers and programs Questions and Answers Windows Related Display Related Sound Related Modem Related Wired LAN Related Wireless LAN Related Games and Programs Related Security Center Other Questions Product Specifications Glossary Index Contact SAMSUNG WORLD WIDE 130 131 131 132 132 133 134 134 134 137 138 140 141 145 148 150 151 155 159 160 Safety Precautions For your security and to prevent damage please read the following safety instructions carefully A Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality Installation Related Do not install the product in places exposed to humidity such as a bathrooms There is a danger of electric shock Use the product within the operating conditions specified in the Manufacturers User Guide Keep the plastic bags out of the reach of children There is a danger of suffocation Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them This may increase the internal temperature of the computer and may cause an injury Do n
54. a Set Top Box To connect using a coaxial TV antenna cable select CATV Cable TV To connect using a Composite Audio Video cable select COMPOSITE To connect using an S Video cable select S VIDEO However some computers do not support S Video 100 o Scan for channels Select Channel gt Scan Channels from the TV Menu Bar If the Confirm Channel Scan window appears click the Yes button to start scanning for channels When the scan is complete found channels are displayed in the Channels folder of the TV Library in the left pane and the program of a selected TV channel is displayed in the TV Viewing Pane Ee AM Station Pigg Chus Beg Pecensmhn Toc d COMPUTER amp INTERNE SVS TELS VIEN When a set top box is connected the channels on the set top box need to be configured and changed If you have connected a set top box using a coaxial cable you need to set the channel to 3 or 4 according to the set top box channel selection of AVStation premium Watching TV Recording a TV Program Move to TV Station and double click on a channel in the To record the current TV program click the Record EJ Channels folder The program broadcast on that channel button below the TV Viewing pane Is displayed in the TV Viewing pane To stop a recording click the Stop 23 button When a recording is complete the recorded file appears m Changing Channels in the Recorded TV folder of the TV Library Click the Chann
55. a repaired product without testing it for safety might cause electric shock or fire In case of lightning immediately turn the system off disconnect the power cord from the wall outlet and line do not use a modem or phone There is a danger of electric shock or fire Connect only permitted devices to the connectors or ports of the computer Failing to do so may cause electric shock and fire Close the LCD panel only after checking if the notebook computer is turned off The temperature may rise and it may cause overheating and deformation of the product Do not press the Eject Button while the Floppy Disk CD ROM drive is in operation You might lose data and the disk might be suddenly ejected and could cause an injury Take care not to drop the product while using it This may cause personal injury or loss of data Do not contact the antenna with electricity facility such as the power outlet There is a danger of electric shock When handling computer parts follow the instructions on the manual supplied with the parts 12 Failing to do so may cause damage to the product If the computer emits smoke or there is a burning smell disconnect the power plug from the wall outlet and contact a service center If your computer is a note book computer make sure to remove the battery There is a danger of fire Do not use a damaged or modified CD Floppy Disk There is a danger of damaging th
56. anced volume control options double click the Volume icon BM and adjust the volume level in the volume control program Master Volume Options Help Master Yolume Sw Sunth CD Player Balance Balance Balance b 9 45 J 4 5 4 M alume Volume Volume ee HD Audio render Using Recorders This section describes how to perform recording on a computer by using Windows Recorder 1 Connect a microphone to the microphone jack 2 Click Start gt Control Panel gt Sounds Speech and Audio Devices gt Sounds and Audio Devices 3 Click Advanced from Volume and then click Options gt Properties 4 Select HD Audio capture from the mixer device to select Recording from Adjust Volume for Properties Mixer device ITE TEER v Adjust volume for Playback Recording Other Show the following volume controls Mic In Volume RA 5 Select Mic in Volume from Show the following volume controls and click OK The Recording Control window appears and the Selection checkbox of Microphone is selected Increase the microphone volume and close the window to increase the recording sensitivity Click Start gt All Programs gt Accessories gt Entertainment gt Sound Recorder E Click the Record button to perform recording 1 Sound Sound Recorder File Edit Effects Help Position Length 0 00 sec 0 00 sec gt gt gt The default recording duration of Wind
57. and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse Before You Start a Use the Touchpad with your fingers Using a sharp object may damage the Touchpad f you touch the Touchpad or press the Touchpad buttons while booting up the Windows boot time may be extended Touchpad Use to move the cursor Scroll Area Plays the role of the mouse wheel You can scroll up and down using the Scroll Area Touchpad Left Butt Touchpad Right Button You can select or run a program Plays the role of the right mouse using this button button Moving the cursor on the screen Place your finger on the touchpad slightly and move your finger The mouse cursor will move accordingly Move your finger in the direction you wish to move the cursor Click Function Place your finger on the touchpad and tap your finger once over an item you want Alternatively press the left touchpad button once Double Click Function Put your finger on the touchpad and quickly tap twice with your finger on an item you want Alternatively press the left touchpad button twice quickly Right Button Function This corresponds to clicking the right mouse button Press the right touchpad button once The corresponding pop up menu appears Drag Function Touchpad On Off Function If you want to use the mouse only without using the touchpad you can turn the touchpad off To lock the touchpa
58. arer sound if you enable the EDS function when playing music or video on AVStation premium If the Samsung EDS program is installed the EDS function of AVStation will not work 104 Playing an Audio CD 3 The tracks on the audio CD are displayed in the Playlist and the first track is automatically played The procedures to play an audio CD are described below KS AVStation premium MUSIC PHOTO MOVIE id Music 1 Launch AVStation premium and insert an audio CD gt z All Music into the CD drive 28 ans DP cenr nre z My Playlist A Audio CD 2 In the Audio CD window select Play Audio CD using Samsung AVStation and click OK Lue dE Audio CD D 6 6 BS ln Windows can perform the same action each time you insert a disk or connect a device with this kind of file EA Music CD What do pou want Windows to do If an audio CD is already in the CD drive double click the album title in the Audio CD folder of the Library gt Rip music from CD and add the tracks to the Playlist The tracks added to F using Windows Media Player the Playlist are played Play audia CD using Windows Media Player 1 Play Audio CD eet Using PowerDVD Always do the selected action 105 Playing a Music File If a music file is registered to the MUSIC Library you can easily play the music file For the procedures to register tracks to the Library see page
59. ary display device 1 the LCD and drag it to the secondary display device 2 The window is moved to the secondary display device 1 Primary 2 Secondary When you use Dual View configuring the LCD as the S Primary monitor is recommended fthe screen of the secondary display device is displayed at 640x480 pixels with 256 colours change the settings to the desired screen resolution and colour quality in the Display Properties dialog box Adjusting the Volume You can adjust the volume using the keyboard and the volume control program Adjusting the Volume using the Keyboard M M When you turn the system on a booting noise may occur Press the Fn L amp J key combination or Fn E key combination to adjust the volume F6 Press the Fn 1 key combination to turn the volume on or off Using EDS Adjusting the Volume using the Volume Enables listening to surround sound using stereo Adjustment Program speakers To listen to more stereophonic sound click Start gt All Click the Volume icon n on the taskbar and slide the Programs Samsung Samsung EDS Samsung volume control bar to adjust the volume EDS or double click the EDS icon ff on the Taskbar and select a surround mode from the pop up menu Volume To disable EDS select Enhanced Digital Sound OFF from ji the pop up menu To disable EDS select Enhanced Digital Sound OFF from the pop up menu For adv
60. askbar and the connection status is displayed Wireless Network Connection XX Speed 11 0 Mbps Signal Strength Excellent Status Connected kee 25 ATTI Wireless Network Setup Using the Wireless LAN Setup Program The procedures to connect to an access point using a Enter a profile name to be used for the connection wireless LAN configuration program are described Since and select the security settings of the AP to be the wireless LAN configuration program is included in the connected to in the Security tab System Software Media the user has to install the program The network authentication encryption type and Atheros Wireless Network Adapter Device password of an access point are configured through the ee e access point management program For the security information check the security settings of an access 1 Insert the System Software Media into the CD drive point or ask your wireless network administrator and install the wireless LAN configuration program See the following when setting a WEP key ACU Atheros Client Utility Data encryption WEP The IEEE 802 11 WEP Wired Equivalent Privacy standard defines two gt Select System Software Media gt User Installation E SOUL T E E d Wireless LAN Driver ReadMe click ReadMe and represented by 40bits and a 128 bit key When install the program according to the instructions connecting to an Atheros access point you can use the 152 bit key
61. assistance What s new in Windows XP B Invite a friend to connect to your computer with Remote Assistance Music video games and photos e e Windows basics B Get support or find information in Windows XP newsgroups v Protecting your PC security basics Pick a task Networking and the Web e Working remotely B Keep your computer up to date with Windows Update System administration P z H B Find compatible hardware and software for Windows XP gt Undo changes to your computer with System Restore Customizing your computer Accessibility B Use Tools to view your computer information and diagnose problems Printing and faxing D i d yo u kn ow Performance and maintenance 7 a uwa c Send your feedback to Microsoft Fixing a problem If a problem occurs you can get help New Features of Windows XP Windows XP Items Walkthroughs on How to Use PCs Walkthroughs After clicking Customize PC you can view the way to change the back ground picture on Change Desktop How to Change Desktop Background Picture I Windows XP Screen Layout If you turn on the computer the Desktop will appear The Desktop is the work space screen of a computer and is configured as follows The screen layout may differ depending on the computer model and the operating system Shortcut Icons You can launch programs by clicking the shortcut icons on the Desktop Wien SAMSUNG ba Internet
62. at the card referring to the descriptions of To format a memory card 3 p 51 Using a Memory Stick Duo Mini SD and RS MMC Since the above cards are too small you cannot insert the cards into the slot directly Insert the card into the dedicated adapter and then insert the adapter into the multi card slot However the Memory Stick Duo may not be recognized properly depending on the adapter status To remove a memory card 1 Push the tip of the card lightly 2 If the card pops up with a clicking sound remove the card To format a memory card You have to format a card first to use it Formatting a card deletes all data saved on the card If the card includes data backup the data before formatting it 1 Click Start gt My computer 2 Right click over a card drive with the touchpad and select Format 2 Click Start to the formatting To use a card to exchange data with a digital device such as a digital camera formatting the data using the digital device is recommended When you try to use a card which is formatted in the computer in another digital device you may have to format the card again in the device i Connecting a Monitor TV Using an external display device is useful when you are giving a presentation or watching a video or movie through your TV The procedures to connect a monitor or TV to the computer and to watch through a connected monitor or TV are described below Befo
63. atures of Samsung Battery Manager see the description on batteries To Maintain the Changed LCD Brightness After Reboot Configure the following settings to maintain the LCD brightness set using the screen adjustment key Turn on the computer If the SAMSUNG logo appears press the F2 key Then setup will start Q Change the value of Brightness Mode Control on the Boot menu to User Control Press the F10 key to save the change and complete setup Bad pixels of an LCD The LCD may have less than 10 bad pixels but it does not affect the computer performance This product may have bad pixels of the same level as the products made by other companies Caution for Cleaning up LCD Wipe the LCD from the center to the outside with a soft cloth soaked in a computer dedicated detergent If you wipe the LCD firmly it may have damage BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs Before You Start Use the BIOS setup to define a boot password change the booting priority or add a new device Since incorrect settings may cause your system to malfunction or crash take care when configuring the BIOS The functions of the BIOS setup are subject to change for product function enhancement purposes The BIOS Setup menus and items may differ depending on your computer model Entering the BIOS Setup 1 Turn the computer on 2 When the booting screen SAM
64. be present embedded in your notebook system The following section is a general overview of considerations while operating a wireless device Additional limitations cautions and concerns for specific countries are listed in the specific country sections or country group sections The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label If the country you will be using the wireless device in is not listed please contact your local Radio Approval agency for requirements Wireless devices are closely regulated and use may not be allowed The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time Because the wireless devices which may be embedded into your notebook emit less energy than is allowed in radio frequency safety standards and recommendations manufacturer believes these devices are safe for use Regardless of the power levels care should be taken to minimize human contact during normal operation As a general guideline a separation of 20 cm 8 inches between the wireless device and the body for use of a wireless device near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on and transmitting This Statement is not applicable to UMPC Ult
65. calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation E g For a 80GB HDD Windows represents the capacity as 74 5GB In addition the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may reside in a hidden area of the HDD Glossary The Glossary lists the terminologies used in this User Guide For terminologies other than these look in Windows Help Backup A way to save the current data to restore it later if necessary A backup is a way to restore computer data when the data or computer is damaged Client This refers to a computer that uses a shared network resource provided by a server DDR SDRAM Double Data Rate Synchronous Dynamic Random Access Memory DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays This computer uses DDR SDRAM Device Manager An administrative tool used to manage computer devices You can add or
66. click Install Update to start the update The update list on the screen may differ depending on the computer model Updates that must be installed separately If you select Install as an update item that must be installed separately a message appears informing you of this Follow the instruction message to correctly install it 96 Automatic update items display By default your computer is configured to automatically search for updates If there is a new update available this is notified in the notification area Click the balloon help icon in the notification area Here you will be able to find the latest available updates Samsung Update Plus automatically searches downloads and installs the latest versions of pre installed Samsung software and drivers For your system Please click here to configure and to start using Samsung Update Plus Using AVStation premium AVStation premium is an integrated multimedia program that enables users to enjoy music photographs video movies etc all with a single program Before You Start AVStation premium is optional and may not be provided depending on the model The screens used in this manual may differ from actual screens according to the program version TV Station is only available for systems supporting the TV function For detailed usage see the program help Getting Started and Screen Layout To launch the program select Start gt All Pro
67. counts Other Control Panel ions Add or Remove Programs Date Time Language and Regional E Options P Sounds Speech and Audio Devices Accessibility Options Performance and Maintenance Security Center Appearance Change the appearance of desktop items apply a theme or screen saver to your computer and Themes or customize the Start menu and Taskbar Network and Internet Connections 09009000000909900000000900009000000900099000009000000000000000000000000000000090000000000000009000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000009000000000000000000000000000000009000000000000000000000000000000000000000000000000090909 Connect to the Internet create a home or small office network configure network settings to work from home or change modem phone and Internet settings Remove Programs Change the entire sound scheme or individual sounds made by your computer or configures the settings for your speakers and recording devices Speech and Audio Devices Performance l and Schedule regular maintenance checks increase space on your hard disk or configure energy saving settings Maintenance Iy g g Running the Control Panel Click Start Control Panel amp Control Panel File Edit View Favorites Tools Help OQ Back amp po Search iE Folders ies gt Address Control Panel Vg Control Panel Pick rs category E Swi
68. d against m Ensure that the fan vents on the bottom of the casing personal injury and damage to your system are clear at all times Do not place the computer on a soft surface doing so will block the bottom vents m If you use an extension cord with this system make Setting Up your System sure that the total power rating on the products M H plugged into the extension cord does not exceed the extension cord power rating m Read and follow all instructions marked on the product and in the documentation before you operate your system Retain all safety and operating instructions for future use m Do not use this product near water or a heat source such as a radiator m Setup the system on a stable work surface m he product should be operated only with the type of power source indicated on the rating label m Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit m f your computer has a voltage selector switch make sure that the switch is in the proper posi tion for your area 18 Care During Use m Do not walk on the power cord or allow anything to rest on it m Do not spill anything on the system The best way to avoid spills is to not eat or drink near your system m Some products have a replaceable CMOS battery on the system board There is a danger of explosion if the CMOS battery is
69. d function press the Fn Dragging refers to moving an item to another place after selecting it F10 keys Press and hold down the left touchpad button over an item you want to drag and move the item to the new location Touchpad Scroll Function The touchpad scroll area provides the mouse wheel function scroll function Place your finger on the touchpad s right edge for vertical scrolling or the bottom edge for horizontal scrolling and then move your finger along the edge to scroll the screen vertically or horizontally t M de CD Drive An optical disk drive is optional and may differ depending on your computer model For detailed specifications refer to the catalog Before You Start One of the following optical disk drives is installed on this computer Drive Type Function DVD ROM Reads CD DVD RW Combo You can read CDs and DVDs and burn a CD You can read CDs and DVDs and burn CDs and DVDs DVD Super Multi l l Supported DVD recording types include DVD R DVD RW DVD RAM Do not insert a cracked or scratched CD Otherwise the CD may break and damage the optical disk drive when the CD rotates at a high speed When you clean a CD or DVD title wipe with a soft cloth from inside to outside Do not eject a CD when the CD operating LED is on Inserting and Ejecting a CD Click the Eject button of the optical disk drive at the side of the computer Emergency
70. e direktiv 1999 5 EC Dutch Dit product is in navolging van de bepalingen van Europ ees Directief 1999 5 EC Finnish Tama tuote noudattaa EU direktiivin 1999 5 EC maarayk sia French Ce produit est conforme aux exigences de la Directive Europ enne 1999 5 EC German Dieses Produkt entspricht den Bestimmungen der Eu ropaischen Richtlinie 1999 5 EC Greek To TIPOIOV AUTO mrAnpo TIC TIPOBAEWEIC TAG Eupurraikrig Odnyias 1999 5 EC Icelandic bessi vara stenst regluger Evropska Efnahags Ban dalagsins numer 1999 5 EC Italian Questo prodotto conforme alla Direttiva Europea 1999 5 EC Norwegian Dette produktet er i henhold til bestemmelsene i det euro peiske direktivet 1999 5 EC Portuguese Este produto cumpre com as normas da Diretiva Europ ia 1999 5 EC 30 Spanish Este producto cumple con las normas del Directivo Eu ropeo 1999 5 EC Swedish Denna produkt har tillverkats i enlighet med EG direktiv 1999 5 EC Translated Statements of Compliance Local Restriction of 802 11b 802 11g Radio Usage Note to integrator The following statements on local restrictions must be published in all end user documentation provided with the system or product incorporating the Intel PRO Wireless 2200BG Network Connection product Due to the fact that the frequencies used by 802 11b 802 11g wireless LAN devices may not yet be harmonized in all countries 802 11b 802 11g products are designed
71. e product or personal injury Do not insert your fingers into the PC Card Slot There is a danger of injury or electric shock Use recommended computer cleansing solution when cleaning the product and only use the computer when it is completed dried Failing to do so may cause electric shock or fire Emergency disk eject method using paperclip should not be used while the disk is in mothion Make sure to use the emergency disk eject method only when the Optical Disk Drive is stopped There is a danger of injury Do not place your face close to the Optical Disk Drive tray when it is operating There is a danger of injury due to an abrupt ejection Check CDs for cracks and damage prior to use It may damage the disc and cause disorder of device and injury of user Upgrade Related Take care when touching the product or parts The device may be damaged or you may be injured Take care not to throw or drop a computer part or device This may cause injury or damage to the product Make sure to close the computer cover before connecting the power after a reassembly There is a danger of electric shock if your body touches an internal part Use parts authorized by Samsung Electronics only Failing to do so may cause fire or damage the product S Never disassemble or repair the product by yourself There is a danger of electric shock or file To connect a device that is not manufac
72. e highest boot priority device is now set to the Hard Drive Upgrading Memory One or more memory modules are installed on the computer There are 2 memory slots and users can replace the installed memory or add new memory Before You Start Replace or install new memory only after shutting the computer down completely Do not replace or install memory when the computer is in Sleep mode To utilize the dual channel feature using memory modules with the same specifications of the same capacity and from the same manufacturer is recommended Adding a Memory Module 2 Insert a new memory module into the memory slot at an angle of approximately 30 degrees aligning it to the angle of the memory slot 1 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver Fixing Screw Push the memory module down so that it is 3 completely fixed If the memory does not fit easily push the memory module down while pulling the memory module latches outward Close the memory compartment cover and fasten the screw Removing a memory module Pull the memory module latches outward The memory module will pop up Remove the memory module out at an angle of 30 degrees Using the Security Lock Port You can connect a Kensington lock to the Security Lock port to prevent your computer being stolen when you have to use the computer in a public place To use th
73. e present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label The FCC has set a general guideline of 20 cm 8 inches separation between the device and the body for use of a wireless device near the body this does not include extremities This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by the FCC This Statement is not applicable to UMPC Ultra Mobile PC such as PDA Portable PC This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service FCC Statement for Wireless LAN use
74. e sharing server must be entered in the client as well remember them Check the settings and click Next Click Add Printer and set up a printer following the 8 instructions in the wizard Once printer addition is complete click Refresh Select the added printer and click Complete Q If the Do you want to move to newly added location now window appears click No If you don t want to add a printer just click Complete without following the instructions in the wizard The added location icon is created and sharing server setup is complete Set up the sharing client next How to Set up the Sharing Client This description is discussed based on the wireless connection to the sharing server The sharing server has to be turned on and the wireless LANs in both computers have to be active 1 2 3 4 9 6 Run Samsung Network Manager on a computer that will function as the sharing client Click Add Select the icon that shows the network location and enter the location name Click Next Select Sharing Client Wireless and click Next Enter the values in the Wireless Connection Name and Network Key fields in the Select Device window and click Next Check the settings and click Next T 8 Click Add Printer and set up a printer following the instructions in the wizard Once the printer addition is complete click Refresh Select a printer and click Complete If you don t want to add a printer just click
75. ed to connect the microphone 3 Fan Vents The internal heat of the computer is emitted through these holes If the vents are blocked the computer may overheat Avoid blocking the vents as this may be dangerous 36 4 DC Jack A jack to connect the AC adapter that supplies power to the computer 2 USB Port You can connect USB devices to the USB port such as a keyboard mouse digital camera etc Wired LAN Port Connect the Ethernet cable to this port p 71 37 3 Monitor Port A port used to connect a monitor TV or projector supporting a 15pin D SUB interface z p 52 Bottom View 1 Speaker 2 Memory Compartment Cover A device used to generate sound The main memory is installed inside the cover E p 126 EB You will be charged to replace the hard disk at service centers 38 I Turning the Computer On and Off Turning the computer on Turning the computer off Connect the AC adapter 1 Click the start button EET on the taskbar Refer to the Installation Guide Slide the LCD Latch to the right and then lift up the 2 Click Turn Off Computer LCD panel Vs Lag OF o Turn CFF Computer 3 Press the Power button to turn the computer on 3 Click Turn Off Turn off computer Cancel If the computer has not turned off properly due to a system error press lt Ctril gt lt Alt gt lt Delete gt When Windows Task Manager dialog box appears click Shut Down gt Turn Off t
76. eir last state Icon This refers to a small image that represents a file that users can use LAN Local Area Network A communications network connecting computers printers and other devices within a local area such as within a building A LAN enables all connected devices to interact with other devices on the network The current LAN uses the Ethernet media access control method developed in the early 1980s To connect to an Ethernet a network card called a LAN card Ethernet card or network interface card is required To exchange data between computers a protocol is required besides the hardware equipment Windows XP uses TCP IP as the default protocol LCD Liquid Crystal Display There are Passive Matrix and Active Matrix LCD types This computer uses the Active Matrix type LCD called a TFT LCD Since an LCD is implemented by transistors instead of a cathode ray tube unlike a CRT its size can be slim And because it does not blink it reduces eye strain Network A group of computers and devices such as printers and scanners connected by a communications link A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links The biggest network is the Internet a worldwide network Notification Area This refers to the right area of the Taskbar including program icons such as the volume control the power options and the time Power Sch
77. el buttons la 09 below the TV Viewer or double click a channel from the TV Library Alternatively click the Channel button of the computer Recorded TV files are saved in the C Program Files Y Samsung AVStation Premium xx Data Recorded TV folder To delete all registered channels click on Reset You can watch a recorded TV program in the TV Channels from the menu Library gt Recorded TV folder or the MOVIE Station gt Recorded TV folder m Watching in Full Screen mode Double click on the TV screen to watch TV in full screen mode To return to the previous TV screen size double click on the TV screen again m Capturing a TV Screen Click the Capture button below the TV Viewer to capture the currently displayed image on the screen Captured images are saved in the C Program Files Samsung AVStation Premium xx Data Captured Images folder In addition you can view captured images in the PHOTO Station gt Captured Images folder Reserving a TV Recording You can reserve a TV recording Click the Recording Reservation eo button below the TV Viewing pane 2 If the Add Recording Reservation window appears enter a Name the Channel Number and the Recording Frequency and click the Next button iM Reserve Recording This wizard helps you to reserve a recording AVStation Reserve Recording Name News Channel Number cH 006 Recording Period once Finish E Cancel C 3
78. emes This refers to a pre determined power management option group For example you can set the time the computer waits before entering Standby Mode or before the monitor or hard drive turns off The settings are saved as a power scheme Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon Server In general a server refers to a computer that provides shared resources for network users Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it Shared Folder A folder that can be used by other users on the network Network Administrator A user who plans configures and manages network operations Sometimes a network administrator is called a system administrator Sleep Mode A power mode that enables computers to save power consumption when they are not being used When a computer is in Sleep Mode the data on the computer memory is not saved to the hard disk If the power is tuned off the data in memory will be lost System File System Files refer to files that are read and used by the Windows operating system In general system files must not be deleted or moved USB Universal Serial Bus This refers to a ser
79. estination country If your system came equipped with an internal embedded wireless device do not operate the wireless device unless all covers and shields are in place and the system is fully assembled Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Please contact manufacturer for service Only use drivers approved for the country in which the device will be used See the manufacturer System Restoration Kit or contact manufacturer Technical Support for additional information P United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Use in specific environments The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments The use of wireless devices on airplanes is governed by the Federal Aviation Administration FAA The use of wireless devices in hospitals is restricted to the limits set forth by each hospital Explosive Device Proximity Warning Do not operate a po
80. et 2 Select an icon that represents the corresponding location from the Saved Locations window and then click Move When the network settings of the selected location 3 are applied the new location and the network connection information are displayed in The detailed Information for window Sharing Internet Access Set one computer as the sharing server and another computer as the client for two computers to share an Internet using one Internet line Once the configuration is complete you can use the Internet immediately If you perform Internet sharing setup by using Samsung Network Manager the program must be installed into both computers There are three methods for setting each computer as a sharing server and a client as shown in the table This document describes how to do so by giving an example to the typical connection method 1 Wire Wireless Sharing Server Hereinafter referred to as server Computer that is equipped with two LANS and is directly connected to an Internet Sharing Client Hereinafter referred to as client Computer that is not directly connected to the Internet and is able to use the Internet through the sharing server How to Connect the Client to the Server Network Device of the Server Network Device Connection Connection Check the connections before connecting to the Type Devi h Connects to of yeas EMI IE the client the Client Internet Method Wired LAN Wireless LAN Wireless LAN It
81. etup This equipment has been approved to Council Decision 98 482 EEC CTR 21 for Pan European single terminal connection to the Public Switched Telephone Network PSTN However due to differences between the individual PSTNs provided in different countries the approval does not of itself give an unconditional assurance of successful operation on every PSTN termination point In the event of problems you should contact manufacturer Technical Support 31 WEEE SYMBOL INFORMATION Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal CALIFORNIA
82. ger 909 Easy Network Manager is a program that enables you to easily configure the network settings You can configure the network settings for each location and you can also diagnose the network status E p 80 mE Easy Display Manager Troubleshooting Functions Easy Display Manager is a program that displays the changed setting on the screen when a setting is changed by pressing the shortcut keys and enables changing the display mode through the Display J Settings window SAMSUNG Magic Doctor is troubleshooting software provided by Samsung Computer for system diagnosis a EENE and restoring the system Se ALIE The system diagnosis function enables users to Brightness diagnose system problems without assistance from others m SAMSUNG Magic Doctor 7 Example The icon that appears when pressing the Fn Lt keys to change the screen brightness B Easy SpeedUP Manager This program enables you to select operation mode when you need maximum system performance or low noise low power consumption with one click E p 42 93 I CyberLink PowerDVD You can enjoy audio and video playback of your DVD movies using the Cyberlink PowerDVD program Before You Start Cyberlink PowerDVD is optional but not offered for some models 1 Insert a DVD title into the DVD drive Select Play DVD Video and click OK DVD movie starts to play in a moment SHERI D Windows can perform the same action each tine you insert
83. gital Image EDI RS EDI Enhanced Digital Image is a visual quality enhancement technology developed by Samsung Electronics You can view a clearer and sharper picture by enabling the EDI function when watching TV or playing a video on AVStation premium However some TV tuners and graphics cards are not supported by EDI For information on EDS Enhanced Digital Sound see page 5 p 104 113 Playing a DVD The procedures to play a DVD title are described below To play a DVD title DVD playing software for example Em CyberLink PowerDVD must be installed Install the DVD playing software first 1 Launch AVStation premium and insert a DVD title into the DVD drive 2 In the What do you want Windows to do window select Play DVD Video using Samsung AVStation and click OK PearlKoreaD1 10 28 01 D Windows can perform the same action each time you insert a disk or connect a device with this kind of file T DYD movie What do wou want Windows to do e Play DVD Wideo using Windows Media Player ij Play DVD Video FESSES Using PowerB D SPP lay DWD Video using Samsung AV Station 3 7 Open folder ta view files Wing Windows Explorer KMS Always do the selected action 114 3 The DVD title is played 6Y AVStation premium CILLDI y 4 Movie TV MUSIC PHOTO MOVIE zi pvp veo PearlKoreaD1 10 28 01 000000 9 T T If a DVD title is already in
84. grams gt Samsung gt AVStation premium gt AVStation premium Alternatively double click the AVStation premium icon AX on the Desktop SY AVStation premium Exit Menu Bar Fle Fat ven Pey to eb Jo i Se R f a Music Click the Exit button to TV MUSIC PHOTO MOVIE exit the program Library Station Bar LO EO EO EDS linn TV You can watch and record TV programs MUSIC You can play a music file or an audio CD PHOTO You can view or edit a photograph image and also view the photographs through a SlideShow MOVIE You can play a video movie file or a DVD VCD title EE 97 TV Station Using TV Station you can watch and record TV and CATV programs In addition you can play a recorded TV program or watch video from an external video device e g camcorder by connecting it to your computer tv TV Station only appears for models with the TV function Launch AVStation premium and click on TV on the Station bar Station Bar Ped AV Station j TV Menu Bar CEET TV Library TV Viewer Pane COMPUTER amp INTERNE STES OVI Time Shuttle Buttons Capture Button Channel Buttons EDI Button Record Button Volume Control Recording Reservation Button What is Enhanced Digital Image EDI Y EDI is a visual quality improvement technology developed by Samsung Electronics By enabling EDI while watching a TV program or playing a video on AVStation
85. gy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help If necessary the user should consult the dealer or an experienced radio television technician for additional suggestions The user may find the following booklet help ful Something About Interference This is available at FCC local regional offices Our com pany is not responsible for any radio or television inter ference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company The correction will be the responsibility of the user Use only shielded data cables with this system 25 Intentional emitter per FCC Part 15 Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may b
86. he following describes how to use the wireless LAN Peer to Peer or Ad HOC This method enables the based on AP connections configuration of a small office network in one computer Then another computer is connected to the computer m AP Connections wirelessly for communications You can connect to the Internet or a computer on For more information on how to establish connections the network by connecting to AP on an AP enabled see the information from Start Help and Support network Networking and Web What is Access Point AP Y AP is a network device that connects wired LAN to wireless LAN and corresponds to the wireless hub of a wired network Also AP allows you to connect more than one computer where wireless LAN is enabled Connecting to Wireless LAN If an AP exists near your location you can easily connect to wireless LAN in the method provided by Windows XP If you use the program provided by a wireless LAN card provider connect to wireless LAN after seeing page B 77 of this document The following description is based on Windows XP Service Pack 2 thus the pictures may vary 1 Click the Wireless Network Connection icon qz from the Taskbar using the right button of the touch pad Then click View Available Wireless Networks Change Windows Firewall settings Open Network Connections Repair Select an AP to be connected and click Connect If a network key is set in the AP
87. ial interface standard developed to replace the conventional interface standards such as Serial and PS 2 While USB 1 1 supports 12Mbps 12 million bits per second USB 2 0 supports a data rate that is 40 times 480Mpbs faster than that of USB 1 1 The data rate of USB 2 0 is equivalent to that of IEEE1394 Therefore USB 2 0 is used for A V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate Windows The name of an operating system developed by the Microsoft Corporation Windows XP is installed on this computer Windows Media Player A multimedia program included with Windows Using this program you can play a media file create an audio CD listen to a radio broadcast search and manage media files and copy files to a portable device etc Index B BIOS Setup Booting Priority C CD Drive Recording Click Connect Output Monitor Control Panel CyberLink PowerDVD D Dual View Desktop Change H Help L LCD Brightness 119 125 47 45 52 65 94 54 62 61 118 Memory Multi Card Slot N Network Network Status Diagnosis P Password Phone Connection Play AVStation Playing Music Product Specifications Program R Recorder Resolution Color 126 49 71 88 123 89 9f 106 151 91 58 69 S Samsung Network Manager 80 Samsung Update Plus 95 Security Lock Port 128 Safety Precautions 6 Shortcut Keys 42 Status Indicators
88. ice ETS 300 328 if fitted with a 2 4 GHz band embedded wireless device ETS 301 489 1 if fitted with a 2 4 GHz band embedded wireless device ETS 301 489 17 if fitted with a 2 4 GHz band embedded wireless device 29 European Radio Approval Information for products fitted with EU approved radio devices This Product is a Notebook computer low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz band may be present embedded in your notebook system which is intended for home or office use This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration Number and the Alert Symbol is on the system label The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R amp TTE directive See 802 11b and 802 11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below Translated Statements of Compliance English This product follows the provisions of the European Direc tive 1999 5 EC Danish Dette produkt er i overensstemmelse med det europ isk
89. ing to the instructions on the screen Click Start gt All Programs gt McAfee gt McAfee SecurityCenter 1 l If a virus is found remove the virus according to the instructions of the Restoration Wizard 2 Click Scan from the left pane of the program IM L McAfee SecurityCenter regularly McAfee SecurityCenter 9 us va 2 To protect yourself against the latest viruses update Note Connect to the Internet and click the Update icon Quite to update Common Tasks Click any category on the left to view details Computer amp Files gt Home Protecte view Recent Events Manage Network MIN Internet amp Network Maintain Computer Protected Backup and Restore Files Lockdown Firewall E mail amp IM Restore Firewall DeFaults Protected Manage Wireless Networks Parental Controls Enabled Components Installed E E SecurityCenter Information VirusScan Update Check 7 13 2006 Personal Firewall Last Scan 7 7 2006 More Subscription Expiration 7 31 2006 Configure G View Details Advanced Menu I Using Samsung Magic Doctor Magic Doctor is troubleshooting software provided by Samsung Computer A user can diagnose system problems via one click or by selecting diagnostic items Before You Start The screens used in this manual may differ from actual screens according to the program version Diagnosing the System 1 Select S
90. is feature you have to purchase the Kensington lock additionally To use the Kensington lock refer to the product manual Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port Chapter 7 Appendix Using McAfee SecurityCenter 130 Using Samsung Magic Doctor 131 Diagnosing the System 131 Reinstalling Software 132 Running the system software Media 132 Installing drivers and programs 133 Questions and Answers 134 Windows Related 134 Display Related 134 Sound Related 137 Modem Related 138 Wired LAN Related 140 Wireless LAN Related 141 Games and Programs Related 145 Security Center 148 Other Questions 150 Product Specifications 151 Glossary 155 Index 159 Contact SAMSUNG WORLD WIDE 160 I Using McAfee SecurityCenter A computer virus is a program that damages computer files and information saved on a computer A computer is infected by an already infected file or by another computer over the Internet Let s learn how to use McAfee SecurityCenter in order to scan and remove viruses and to protect your computer from various threats on the Internet Q Before You Start When McAfee SecurityCenter is run for the first time the Registration screen appears Register according to the instructions on the screen You have to register the software to protect the PC with the latest security information Scanning and Curing Viruses If a virus is found remove the virus accord
91. is wireless to wireless connection First turn on the wireless LAN Method2 Wireless LAN Wired LAN Wired LAN It is wire to wire connection First use the LAN cable to connect two devices before setting the computer Methods Wired LAN Wired LAN Wired LAN In Method 3 you have to install the wired LAN card for connection How to Set up Sharing Server Check if the LAN cable is properly connected before setting up the sharing server 1 Run Samsung Network Manager on the computer that will be used as the sharing server 2 Click Add 3 Select the icon that shows the network location and enter the location name for example Home Sharing Server and click Next 4 Select the sharing server and click Next 5 Set up the network device to be connected to the external Internet as shown in the figure below and click Next Determining whether to use a firewall Add Location 3 Choose Device to connect Internet directly Please enter IP address after choosing connection device Iv Enable Firewall You can t us some of online game Choose Device Iv Get IP Automatically o i 30 Gateway SubNetMask j j DNS Server Internet Direct Connection Sharing Select a network device for example wired LAN IP address setting Set up the device to be connected to the client as 6 shown in the figure below and click Next Because the wireless connection name and network key entered in th
92. k Check Auto Diagnosis on the Manage menu 3 The Network Connection Picture window appears i If you click Start checking the network will start Device status Device Name Intel R PRO Wireless 2200BG Network Connectic Current computer didn t connect the interent cable Device Name Broadcom 440x 10 100 Intearated Controller lt lii v Connecting with a Modem The procedures to connect to the Internet via a phone connection are described below Before You Start To connect to the Internet you have to subscribe to an Internet connection service of an Internet service provider ISP A modem port is optional and provided for some models only Connect the phone Cable to the Modem port Take care to not connect a digital phone line to the modem port me SAMSUNG 2 Connect to the Internet according to the instructions of your Internet service provider ISP If the Internet connection is terminated abnormally the connection is not released and the corresponding cost can be accrued Chapter 5 Using Applications Introducing Programs 91 CyberLink PowerDVD 94 Samsung Update Plus 95 Using AVStation premium 97 Getting Started and Screen Layout 97 TV Station 98 MUSIC Station 104 PHOTO Station 108 MOVIE Station 113 Introducing Programs Using the software supplied with the Samsung computer you can easily use functions and troubleshoot problems Try to use the software afte
93. ld the Power button until the system manually shuts off If the Power Saving Mode is configured into the Power button press and hold for more than 4 seconds to shut the system off When the system is turned on after such manual shutdown Scandisk will run to check errors in the system Qin system freezes during program operation A1 There is an error with the program currently being used Press the Ctrl Alt and Delete keys simultaneously and click End Task in the Windows Task Manager window A2 There is an error with the Windows OS Reboot the system by using the Power button Display Related Q LCD screen is too dark or too bright A Turn on the LCD backlight or adjust the screen brightness Press Fn Fx to turn on the LCD backlight or press Fn t Fn to adjust the screen brightness Qi screen saver disturbs screen viewing during Media Player or video file operation A Click Tools gt Options gt Player and then clear the Allow screen saver during playback in the Media Center check box In DOS mode changing the full screen DOS mode by pressing lt ALT gt lt Enter gt key displays a broken image for a short period A The DOS mode which supports 2 Byte characters such as Korean and Japanese runs in graphic not in text mode In this case a broken image may be displayed while changing the video mode settings In the following cases the screen blinks or Qisa noise for
94. lfunction or halt Do not place a heavy object over the product This may cause a problem with the computer In addition the object may fall and cause injury or damage the computer Battery Usage Related Dispose of worn out batteries properly There is a danger of fire or explosion The battery disposal method may differ depending on your country and region Dispose of the used battery in an appropriate way Do not throw or disassemble the battery and do not put it into water This may cause an injury fire or explosion Use only a battery authorized by Samsung Electronics Failing to do so may cause an explosion Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery Contact with a metal may cause 11 excessive current and a high temperature and may damage the battery or cause a fire Charge the battery according to the instructions in the manual Failing to do so may cause and explosion or fire from damage to the product Do not heat the battery or expose it to heat e g inside a vehicle during the summer There is a danger of explosion or fire Usage Related Do not place a candle lighted cigar etc over or on the product There is a danger of fire Make sure to have the product tested by a safety service engineer after repairing the product Authorised Samsung Repair Centers will carry out safety checks after a repair Using
95. lt Alt gt lt Arrow gt key 1 rotate 0 degrees rotate 270 degrees rotate 180 degrees rotate 90 degrees to return to the original orientation For other graphics cards use the rotation mode of the Advanced menu supported by the corresponding graphics card company The color is strange when the picture is displayed on the connected monitor or projector A Check the monitor signal cable connection and reconnect the cable Sound Related Do not remove the High Definition Audio item Removing this item also removes the modem device driver Q to install and uninstall the sound driver I A To install or uninstall the sound driver from this If you have removed this item you need to install the system please follow the procedures below modem device driver again gt Sound Driver Components The sound driver consists of the following 3 components and the 3 components are automatically gt Reinstalling the Sound Driver installed during the installation If there is an already installed sound driver uninstall High Definition Audio KB888111 Microsoft UAA the driver according to the procedures above Bus Driver for High Definition Audio The sound driver is included on the System Software SoundMAX SoundMAX Integrated Digital HD Media Audio Q Insert the System Software CD ROM into the CD Samsung EDS ROM drive gt Uninstalling the Sound Driver Q Select Sound Driver
96. lways Allow Pop ups from This Site To display popup windows from a particular site Q Click Internet Options in Start gt Control Panel gt Security Center Manage security settings for In the Privacy tab of Internet Properties click Settings from Block pop ups e Enter a URL to want to allow pop ups into Address of Web site to allow and click Add Q You will find that the entered address is added to the allowed sites list The next time you connect to the Web site you will see pop ups appearing When you need to re block a permitted site select the Web site address that you want to block from the Allowed Sites and click Remove When you connect to a Web site you see the message To help protect your security Internet Explorer stopped this site from installing an ActiveX control on your computer or This site might require the following ActiveX control below the address bar A Windows XP SP2 blocks unsigned ActiveX controls from being installed when connected to certain Web sites for security reasons On some Web sites that have no ActiveX controls installed applications are not started or do not display properly In this case to install ActiveX controls right click the notification area to display a menu from which you can select Install ActiveX control When you see a Windows Security Alert icon II appear on the right part of the Taskbar With the Security Center feature added Windows XP
97. m In Image Zoom Out Workspace Edit the image using the Shape Edit and Effect tools resize Shape tool Change the shape of an image through cut Edit tool Draw a line add some clip art or enter letters Effect tool Apply various effects to an image When finishing editing an image click the Save Edited Image me button below the Image Editor window The edited image is saved Adding Images to the Library The PHOTO Library is a library holding image files to be used by PHOTO Station The procedures to add image files saved on the computer to the Library are described below You can add files add folders or search and add files As an example the procedures to add folders are described below Click the Register a File ee button below the Library and click Add by Folders Select a folder which includes image files and click OK The image files in the folder are added to the Library Y The image files used in AVStation are automatically added to the Library MOVIE Station Launch AVStation premium and click MOVIE on the Station Bar Y AVStation premium MOVIE Menu Bar e m w OOOO dE w Movie TV MUSIC PHOTO MOVIE Station Bar MOVIE Library 3 pvp veo AVStation premium Video Play window Register a File ES Ei A Capture Button EDI Setting Button EDS Setting Button p 104 Play Control Buttons Volume Control What is Enhanced Di
98. m New Password field empty and press lt Enter gt In the Setup Notice window press lt Enter gt The password is deactivated Changing the Boot Priority The default boot priority of your computer is the CD ROM first then a removable device and then the hard disk drive in this order By default the highest boot priority device is set to the CD ROM DVD drive As an example the procedures to change the highest boot priority device to the hard disk drive are described below 1 Select the Boot menu in the BIOS Setup 3 Move to the IDE HDD using the key and press the F6 key to move it to the top s Boot Device Priority 2 Press Enter on the Boot Device Priority item Boot priority order V IDE CD XXXXXXXXXXXXXXXXXXX Y USB KEY Not Installed Y USB CDROM Not Installed V USB FDC Not Installed VY USB HDD Not Installed V PCI BEV Not Installed v PhoenixBIOS Setup Utility Main Advanced Security P Boot Device Priority Item Specific Help NumLock Off Enable Keypad By NumLock Summary screen Disabled Boor time Diagnostic Screen Disabled PXE OPROM Only with F12 Brightness Mode Control Auto Select system boot options Excluded from boot order V USB ZIP Not Installed Y USB LS120 Not Installed Fi Help T4 Select Item F5 F Change Values F9 Setup Defaults Esc Exit Select Menu tie Select Sub Menu 0 Save and Exit Press the F10 key to save the settings and exit Setup Th
99. not work properly You cannot use the same IP address for wired and wireless connections To use only one IP address for both wired and wireless connections you must disable one of them according to your requirements in Network Connections in the Control Panel After installing the Wireless LAN Setting program the AEGIS Protocol IEEE 802 1x protocol appears in the Local Area Connect Properties window The protocol is a security authentication protocol that is automatically installed when the Wireless LAN Settings program is installed and does not affect the program operation For Intel PROSet Although I have turned the wireless LAN off using the Turn Off Wireless LAN button in PROSet the Wireless LAN LED is still on This is normal The Turn Off Wireless LAN button in PROSet just turns off the wireless LAN software The wireless LAN hardware is not affected by this operation For Intel PROSet After installing PROSet cannot manage my wireless network in Windows A When clicking Use Microsoft Client in the Tools menu of the PROSet you can manage wireless network in Windows Thereafter if you wish to manage your wireless network click Activate Intel PROSet Wireless in the Tools menu of the PROSet Games and Programs Related Qi game is not executed or some functions are not working A Change the graphic setting of the game to 2D or Software Renderer then execute the program again
100. o the Library Browse for Folder Select Folder to Search Desktop H AG My Documents B 3 My Computer Ee Local Disk C pez audio CD D RES Shared Documents lS Administrator s Documents gj 9 My Network Places ao MediaSample The tracks used in AVStation are automatically added to the Library PHOTO Station Launch AVStation premium and click PHOTO on the Station Bar 6M AVStation premiun PHOTO Menu Bar Gomme O TV MUSIC PHOTO MOVIE Station Bar View Image Image PHOTO Library EQ Al Images Ets Nl Images Hee Captured Images E 3 Images I Created Preview Zoom in Image Editor Tab Image Viewer Tab Register a File Move to a Higher Level Folder Viewing an Image The procedures to view images registered to the PHOTO Library are described below For the procedures to register image files to the Library see page E 112 1 Move to PHOTO Station and double click All Images 2 Click a folder which includes images and the images in the folder are displayed in the Image Viewer window BY AVStation premium File Edit View Tools Help T Photo TV MUSIC PHOTO MOVIE View Image 5 all Images utan 11 a EE 2005 aH c ES Captured Images Seen dedi ee T Image Viewer Window Preview Iv CreatureO1 Image 3 Double click an image The selected image is zoomed in BY AVStation premium File Edit View Tools Hel Sry Photo MUSIC PHOTO MOVIE
101. o turn off the computer Your unsaved work may be lost damaged a f lt Ctri gt lt Alt gt lt Delete gt keys do not operate either press the power button for more than 4 seconds to turn off the computer Your unsaved work may be lost damaged The next time you turn on your computer a hard disk check will be performed before Windows starts If the LCD brightness is too dim press the Fn keys and adjust the screen brightness 5 p 43 39 Chapter 2 Using the computer Keyboard Touchpad CD Drive Inserting and Ejecting a CD Burning a CD Multi Card Slot Connecting a Monitor TV Connecting a Monitor Connecting a TV Viewing Through a Monitor Using Dual View to View Extended Screen Adjusting the Volume Using Recorders 41 44 47 47 48 49 52 52 53 54 55 57 58 Keyboard Delete Ba F9 F10 lfri F12 prt Sc Pause Insert Y E ys Rq rea E gt PET 7 Je Te Fn E 4 United States v AS PrtSc Pause Insert lete a e Sys Rq Break uni _ te uda
102. o verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label As a general guideline a separation of 20 cm 8 inches between the wireless device and the body for use of a wireless device near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by Industry Canada 2f This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device To prevent radio interference to licensed service this K device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service
103. odems in the System Properties window and check if there is a yellow exclamation mark on the installed modem icon If there is delete the modem device driver and reinstall the driver because the yellow exclamation mark represents a not properly installed driver If there is no yellow exclamation mark double click the installed modem and click Diagnostics tab Query Modem in the Modem Properties window to diagnose the modem No message in either of Command and Response in the Diagnostics tab means that the modem is not operating properly Diagnose the modem again after restarting the system or reinstalling the driver You have to exit all programs using modem in the advance of diagnostics of the modem Q cannot make a call using an extension line A In general the dial tone of a PBX or a digital phone switching system is not a continuous one unlike that of a trunk line Therefore the modem may not make a call because the modem mistakes the dial tone from a PBX or a digital phone switching system as a busy tone In this case complete the following procedures Using an AT command As an initialization command use the command ATX3 Otherwise enter the ATX3 command manually before making a call It can correct this problem by skipping the dial tone check step Configuring the Modem through the Control Panel Click Start gt Control Panel gt Network and Internet Connections Under See Also click
104. on as it operates in Hybrid mode Check the authentication type A connection may be disconnected after a period of time if the Use IEEE 802 1x network authentication option is selected when IEEE 802 1x authentication is not being used View the properties of the corresponding AP in the Wireless Network Properties In the Authentication tab unselect the Use IEEE 802 1x authentication in this network option For detailed information on the authentication server ask your network administrator A1 A2 A3 A4 Check the AP settings Check if the surroundings are appropriate for a wireless LAN A wireless LAN connection may be limited by the surrounding environment and distance Obstacles such as walls and door mats affect the quality of the wireless LAN signal You have to install an AP in a high open position far away from any other radio signal sources If the AP is excessively far away or is installed at the end of a building and you are attempting to use the wireless LAN from the other end you may not be able to use the wireless communication normally because the signal is blocked by obstacles between you and the AP such as a wall Check if the AP operates properly If the AP is not operating properly turn it off and on again and try again Check if the AP firmware is the latest version For more information on the AP firmware ask the AP manufacturer or your product provider Check if the AP is pro
105. onment used for a company network or broadband internet connection at home Before You Start You can also configure the network settings using the Samsung Network Manager E p 80 1 Connect a LAN cable to the computer s LAN port Select Local Area Connection and click the right button of the touch pad and select Properties AA mE AE Address e Network Connections A LAN or High Speed Internet M dips Network connedion I Connection a onnected Fire vared l el IntekKR PRO ikea I A 13 194 Net Adapte Set Sabe lee or small T office netwo change dons Firewall s QN Disable e ium k j Rename this connection Change settings of this Bridge Connections connection Create Shortcut Other Places E control Panel Q My Network Places My Documents E My Computer Details Local Area Connection LAN or High Speed Internet Network cable unplugged Click Start Control Panel Network and Internet Connections gt Network Connection 3 Click Manage Network Connections from the left pane Click General tab and select a LAN driver from Connect using Select Internet Protocol TCP IP and click Properties The displayed LAN driver may vary depending on the SN LAN device type Click Install to add a network component as shown in the figure below You can add a client a service or a protocol 4 Local Area Connection Properties General Authentication Advanced Connect using E XXXX
106. ot install the computer on a slant or a place prone to vibrations or avoid using the computer in that location for a long time This increases the risk that a malfunction or damage to the product will occur Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model Do not touch the mains plug or power cord with wet hands There is a danger of electric shock Do not exceed the standard capacity voltage current of a multi plug or power outlet extension when using it for the product There is a danger of electric shock or fire hazard If the power cord or power outlet makes a noise disconnect the power cord from the wall outlet and contact a service center There is a danger of electric shock or fire hazard Do not use a damaged or loose mains plug or power cord or power outlet There is a danger of electric shock or fire hazard Plug the power cord firmly into the power outlet and AC adapter Failing to do so may cause fire hazard Do not unplug the power cord out by pulling the cable only If the cord is damaged it may cause electric shock Do not bend the power cord excessively or do not place a heavy object over the power cord It is especially important to keep the power cord out of reach of infants and pets If the cord is damaged it may cause electric shock or fire Use a wall outlet or multi pl
107. ot installed may cause problems with the system performance You can install only required components What is SYSTEM SOFTWARE MEDIA SYSTEM SOFTWARE Media is a endi yia e as a ir to enable the easy re ingtaliadon of drivers and sottwar The required oysiem sotware is a ota Press Brandar EN potomne imum saldon and contine with the Software mot m Custom Installation You can customize the installation of drivers and programs m Standard Installation This displays a list of drivers or programs that are not currently installed on your computer from the system software Media provided All necessary components are installed using the factory defaults Installing drivers and programs Click Standard Installation in the main window of Click OK The drivers and programs are the System Software Media Standard Installation is 3 automatically installed as factory defaults recommended SevSTEM SOFTWARE MEDIA 2 The system is scanned to display the drivers and m j programs that need to be installed See What ls SYSTEM SOFTWARE MEDIA inmtadialim pos SVETIM SOFT ad by Samsung Corpul be j in case nf a syste crash 4 When done restart the system Questions and Answers This section provides information on possible problems solutions and other references for system use Windows Related Qn system does not shutdown properly A When the system does not shutdown normally press and ho
108. ower failure while the hard disk drive is operating m he data may be lost and irrecoverable due to a computer virus infection m The data may be lost if the power is turned off while running a program m Moving or causing an impact to the computer while the hard disk drive is operating may cause files to be corrupted or bad sectors on the hard disk To prevent data loss due to damage to the hard disk drive please backup your data frequently o o O N 14 Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm The following instructions are about maintaining a proper posture during computer use developed through human engineering Please read and follow them carefully when using the computer Otherwise the probability of RSI Repetitive Strain Injury from repeated operations may increase and serious physical harm may be caused The instructions in this manual have been prepared so that they can be applied within the coverage of general users If the user is RS not included in the coverage the recommendation is to be applied according to the user s needs Since this is commonly applied to Samsung Computers some figures may differ from actual ones Proper Posture Adjust the heights of desks and chairs appropriate to your height The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard
109. ows is 60 seconds Download a dedicated recording program from the Internet to record audio data for a long time Chapter 3 Using Microsoft Windows XP About Microsoft Windows XP Tour Windows XP Help and Support Windows XP Screen Layout Desktop Start Menu Window Control Panel Running Control Panel Running the Control Panel User Account Changing Resolution and Color 60 60 61 62 62 63 64 65 65 66 67 69 The screen shots used in this chapter may differ from actual screens depending on the Windows XP version and model About Microsoft Windows XP Microsoft Windows XP hereinafter referred to as Windows is the basic operating system for computers You should know how to use Windows in order to use your computer properly Use Tour Windows XP as well as Help and Support to learn about how to use Windows Tour Windows XP Tour Windows XP introduces the basic features and characteristics of Windows Click Start gt Tour Windows XP Or click Start gt All Programs gt Accessories gt Tour Windows XP Click the title at the right to view the description of the Windows features The screen layout may differ depending on the computer model and the operating system Introduction Microsoft Internet Explorer File Edit View Favorites Tools Help l Ly j gt x a Pp Search e Favortes e B r Address amp C WINDOWS Help Tours htmlTour deFault htm A Microsoft At Windows
110. perly connected to the network Connect the LAN cable from the AP to a computer and check if the network is connected properly A5 A6 Check the Network Key Encryption Key settings again If the automatic password converting function passphrase function is enabled and the wireless connection is normal but you cannot send data over the connection please enter the Network Key Encryption Key manually Check the AP settings as follows If there are multiple APs running at the same time check the channel setting of each AP If the interval between the channels of the APs is narrow you may experience electromagnetic interference Set the channel numbers of the APs so that the internals between the channels are maximized for example Ch1 Ch5 Ch9 Ch13 computer It is recommended unselecting the Hide option of the AP SSID Service Set ID is a name used to distinguish a wireless LAN from other wireless LANs It is recommended using Long Preamble Preamble is a signal for data transmission synchronization Although some APs support Short Preamble there might be a compatibility problem Because Fixed channel selection is more stable then Auto channel selection Fixed channel selection is recommended It is recommended not using the Block Any and Any Connection Block functions Although these functions block connections at the client side when the network name is Any or Blank it may cau
111. pport S Video input 1 Connect one end of the AV Input Dongle to the Composite or S Video port of the camcorder and connect the other end of the dongle to the AV In port of the system SAMSUNG AV Input Dongle 103 5 Launch AVStation premium and click on TV Select your country and only select Composite and S Video standards when the default settings are incorrect Click Tools gt Option gt TV gt Country Settings from the TV Menu Bar to set the values After completing the settings click the OK button The Country Settings menu may not appear depending on your computer model Select an input signal Select Channel gt Input Signal from the TV Menu Bar and select either Composite or S Video When playing a file on the camcorder the video from the camcorder is displayed in AVStation premium MUSIC Station Launch AVStation premium and click MUSIC on the Station Bar Station Bar 6Y AVStation premium MUSIC Menu Bar caca mc QNT TV MUSIC PHOTO MOVIE f a Music E n All Music E amp artist MUSIC Libra oe Scherzo ry ig 21 4 Audio CD TETEOS Playlist Control Buttons Register a File I OIoEo BN EDS Setting Button Play Control Buttons Play Options Volume Control What is EDS Enhanced Digital Sound Y EDS Enhanced Digital Sound is a sound quality enhancement technology developed by Samsung Electronics You can listen to cle
112. premium you can experience clearer and sharper picture quality However you cannot use the EDI function for some TV tuner and graphics cards For more information about Enhanced Digital Sound EDS see page E p 104 What is Time Shuttle SS This refers to the function that enables you to pause or rewind a TV program while watching it You can rewind a TV program up to 30 minutes Try to control a TV program by using the Time Shuttle button 98 Connecting the TV Antenna Configuring 2 Launch AVStation premium and click on TV the Input Signal and Scanning Channels The procedures to play an audio CD are described below Select your country and only select the Composite 3 and S Video standards when the default settings are incorrect Select Tools Options TV Country Settings from the TV Menu Bar to configure the values After completing the settings click the OK button 1 Connect the TV antenna cable to the TV antenna jack of the computer SAMSUNG Coun inerea E Vickers Sere Lower Gael barn Pik mn Compersbe Standard HTC Seo Stacie TEC Antenna TV Antenna 4 Dongle Q The Country Settings menu may not appear depending on your computer model The picture of the system might differ from that of your system 99 Select a TV Input Signal Select Channel gt Input Signal from the TV Menu Bar and select either TV Public Broadcasts or CATV Cable TV E AVStation pri Connecting to
113. quivalence Number REN assigned to each terminal device provides an indication of the maxi mum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Num bers of all the devices does not exceed 5 To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself Contact the appropriate inspection authority or an electrician as appropriate 28 European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europ ene CE Marking which indicates compliance with the applicable Directives and European standards and amendments identified below This equipment also carries the Class 2 identifier The following information is only applicable to systems labeled with the CE mark European Directives This Information Technology Equipment has been tested and found to comply with the following European directives m EMC Directive 89 336 EEC with amending directives 92 31 EEC amp 93 68 EEC as per EN 55022 Class B EN 61000 3 2 EN 61000 3 3 EN 55024 m Low Voltage Directive Safety 73 23 EEC as per EN 60950 A1 A2 A3 A4 A11 m Radio and Telecom Terminal Equipment Directive 199 5 EC as per CTR21 if fitted with a modem dev
114. r The socket outlet shall be installed near the equipment and shall be easily accessible Do not unplug the power cord out by pulling the cable only Power Cord Requirements The power cord set wall plug cable and AC adapter plug you received with your computer meets the requirements for use in the country where you purchased your equipment Power cord sets for use in other countries must meet the requirements of the country where you use the computer For more information on power cord set requirements contact your authorized dealer reseller or service provider 21 General Requirements The requirements listed below are applicable to all countries m The length of the power cord set must be at least 6 00 feet 1 8m and a maximum of 9 75 feet 3 0m m All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used m he power cord set must have a minimum current capacity of 7 A and a nominal voltage rating of 125 or 250 volts AC as required by each country s power system m he appliance coupler must meet the mechanical configuration of an EN 60 320 IEC 320 Standard Sheet C7 connector for mating with appliance inlet on the computer Regulatory Compliance Statements Wireless Guidance Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may
115. r gt 4 When a message confirming the password configuration appears in the Setup Notice window PhoenixBIOS Setup Utility press Enter MEUM me Security Mri E The supervisor password has been set The supervisor password is required to turn the computer Supervisor Password User Password Supervisor Password on or to enter the BIOS Setup controls access to the setup utility et User Fasswor nter Password on boot Disabled Fixed disk boot sector Normal Help Select Item Change Values Setup Defaults Exit Select Menu Select Sub Menu A Save and Exit Setting a User Password Users can start the system with a user password but cannot enter the System Setup By doing this you can prevent other users from entering Setup Before configuring a user password a supervisor password must have been configured Deactivating the supervisor password also deactivates the user password In the Set User Password item press lt Enter gt and complete the procedures from Step 3 of Setting a Supervisor Password Deactivating the Password 1 a A O N Press lt Enter gt on the password to be deactivated For example to deactivate a supervisor password in the Set Supervisor Password item press lt Enter gt In the Enter Current Password item enter the currently configured password and press lt Enter gt Leave the Enter New Password item field empty and press lt Enter gt Leave the Confir
116. r learning about the basic use of the software For detailed information refer to the help section of the corresponding software Q Before You Start Every software program may not be provided depending on your computer model In addition the screen capture images may differ from actual ones depending on the computer model and software version amp iBOJE a4 SHOE Plus 249 AFH SAE ers ATEAN S Coos a Se A EeLIL MES SHOES 24 si e s x ata He E dt WES acl FAS EASY BOX 6 rre cl HOISA SS Hes eg Borel amp ASE WED A5422 4503 SLE ASH EUN AE 228 20 LIC r ov 1 O 23 98 gg NSle NAW Se C AS 24255 NSS B WES EPDIXADR f PowerDVD PowerDVD The No 1 DVD Experience on the PC Multi Media Functions m CyberLink PowerDVD gad To use this program you have to install the program manually using the additionally supplied System Software Media amp p 94 B AVStation premium ZY AVStation preminum is an integrated multimedia program that enables users to enjoy better quality music photographs videos movies etc all with a single program E p 97 92 Management Functions E Samsung Update Plus ey samsung Update Plus is a software function that examines and updates the Samsung software and drivers installed on your Samsung computer to the most recent versions E p 95 Samsung Network Mana
117. r the screen Settings tab gt Advanced gt Ge Force Go xxxx tab settings For Delta Force Black Hawk Down Medal Select the PowerMizer item slide the AC outlet and of Honor Battle Field 1942 etc the battery sliders to Maximum Performance and then click the Apply button Qir picture is not displayed properly for some games A Some games such as Harry Potter and the Sorcerer s Stone Harry Potter and the Chamber of Secrets etc may not display the picture properly when the screen resolution is set to 1024x768 and the color quality is set to 32 bit For these games set the screen resolution to 1024x768 and the color quality to 16 bit Security Center A1 A2 A3 To change the popup window display settings when connected to the Internet In the Windows XP SP2 environment you can decide whether to display a popup window when connected to the Internet for user convenience and security To display most of the popup windows when connected to the Internet Q Click Internet Options in Start Control Panel Security Center Manage security settings for Q Inthe Privacy tab of Internet Properties clear Block pop ups To display popup windows only from the current site when connected to the Internet Place the cursor on the notification area at the bottom of the Internet address bar and right click to display a menu from which you can select Temporarily Allow Pop ups or A
118. r two display devices This is convenient when needing a wide screen for work In Dual View mode you can select the screen resolution and colour quality for each display device as if there were two separate graphics cards Display Properties Click the monitor 2 icon select the Extend my Windows desktop onto this monitor check box and then click Apply Themes Desktop Screen Saver Appearance Settings Drag the monitor icons to match the physical arrangement af your monitors Connect the external display device e g a monitor or a projector to the corresponding port of the system To connect a TV connect the TV to the TV EH output port of the system Display Screen resolution Color quality Less More Highest 32 bit v XXXX Dy XXX 2 Press touchpad right button on the desktop click Properties and then click the Settings tab Use this device as the primary monitor Extend my Windows desktop onto this monitor When the configuration is complete click Identify Deactivating Dual View Mode on the left side of Troubleshoot The primary display device the LCD is indicated as 1 and the secondary Click the monitor 2 icon clear the Extend my Windows display device is indicated as 2 Now you can view desktop onto this monitor check box and then click the screen through two monitors Apply To move a window between display devices in Dual Y View mode Click the title bar of the window in the prim
119. ra Mobile PC such as PDA Portable PC This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter Some circumstances require restrictions on wireless devices Examples of common restrictions are listed below 22 Radio frequency wireless communication can interfere with equipment on commercial aircraft Current aviation regulations require wireless devices to be turned off while traveling in an airplane 802 11B also known as wireless Ethernet or Wifi and Bluetooth communication devices are examples of devices that provide wireless communication In environments where the risk of interference to other devices or services is harmful or perceived as harmful the option to use a wireless device may be restricted or eliminated Airports Hospitals and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated When in environments where you are uncertain of the sanction to use wireless devices ask the applicable authority for authorization prior to use or turning on the wireless device Every country has different restrictions on the use of wireless devices Since your system is equipped with a wireless device when traveling between countries with your system check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the d
120. re You Start You have to buy a connection cable additionally Connecting a Monitor Connect the monitor to the Monitor port Connecting a TV Since the port to connect to a TV differs depending on the port type used to connect the TV connect as follows Connecting to the Monitor port Connect the monitor and computer using the PC Input RGB port on the TV with the monitor cable 15pin Connecting to the TV Output port Connect the computer and the monitor using the S Video port of the TV using the S Video cable Viewing Through a Monitor You can switch the display device using the shortcut key Switching the Display Device using the Shortcut Key Press the Fn ris J key combination once Then the Easy Display Manager screen appears in which you can select a display device Whenever you press the s0 key while holding down the Fn key the selected option is changed Inn Example Selecting LCD CRT Dual View oc m LCD Notebook Screen CRT External Monitor Screen LCD CRT Clone Notebook External Monitor Screen LCD CRT DualView Notebook External Monitor Screen in Dual View What is Dual View Dual View is a function that enables you to view a computer screen over two display devices It is convenient when you need a wide screen Using Dual View to View Extended Screen Dual View is a function that enables you to view a computer screen ove
121. rk Connections gt Wireless LAN Connection right click and check if the Windows manages wireless network settings W option is selected in the Wireless Network tab of the Properties window If not select the option Q gt A A1 Q Click Start Control Panel Performance and Maintenance gt Administrative Tools gt Computer Management and click Services and Applications gt Services In the right pane double click Wireless Zero Configuration and check if the Startup Type is Automatic and the Status is Started cannot connect to an AP The wireless connection is disconnected frequently Check the Network Key Right click the Wireless Network Connections icon from the Taskbar and click View available wireless networks If wireless networks are found it indicates that the device is operating properly but the network settings may have a problem Please check the Network Key Encryption Key and the AP settings Check if there is a device nearby using the same frequency band If there is a device nearby using the same frequency band such as another wireless LAN device wireless video transceiver microwave oven plasma bulb etc channel interference may ocaur If you experience interference from another device it is recommended changing the AP channel A2 When operating in EEE802 11g mode if there is a IEEE802 11b device operating nearby you may experience low data rates or even disconnecti
122. rtable transmitter such as a wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio frequency wireless devices because their signals could interfere with critical aircraft instruments 24 Other Wireless Devices Safety Notices for Other Devices in the Wireless Network Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network The Part 15 radio device operates on a non interference basis with other devices operating at this frequency Any changes or modification to said product not expressly approved by Intel could void the user s authority to operate this device Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generate uses and can radiate radio frequency ener
123. s it unlawful for any person to use a computer or other electronic device including fax machines to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such business other entity or individual The telephone number provided may not be any number for which charges exceed local or long distance transmission charges In order to program this information into your fax machine refer to your communications software user manual Unintentional Emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limitesapplicables aux appareils num riques de Classe B prescrites dans le r glement sur le brouillage radio lectrique dict par Industrie Canada Intentional Emitter per RSS 210 Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label t
124. se a compatibility problem For more information on the AP settings see the owner s manual supplied with the AP Q gt A Although a connection has been established cannot connect to the Internet Check the TCP IP settings If you cannot connect to the Internet but you are connected to an AP check if the TCP IP settings are configured properly When you are not connected to an AP an X mark appears over the Wireless Network Connections icon m3 in the Taskbar If you double click the icon the Search for Wireless Connections window appears Reconnect to a wireless network referring to the descriptions of Connecting to a Wireless LAN in the Using the Network section When you are connected to an AP an X mark appears over the Wireless Network Connections icon m3 in the Taskbar Double click the icon and check if the IP address is properly allocated on the Support tab If the IP address is not properly allocated the IP address will be displayed as follows for example 169 254 xxx xxx If your network does not support DHCP you have to manually configure an IP address by asking your network administrator In addition even if your network supports DHCP the Internet connection may not be available if the DHCP server fails to allocate an IP address to your computer Q A Q A A have configured both wired and wireless connections with the same IP address but the network connections do
125. tart gt All Programs gt Samsung gt When the system status diagnostics are complete Samsung Magic Doctor gt Samsung Magic the diagnostics result appears Doctor f SAMSUNG Magic Doctor B E x Problems found by the diagnosis there is no signal for the LAN Needs Curing 2 Click the Diagnose the System icon f SAMSUNG Magic Doctor x Select items to be fixed and click the Cure button Detailed View of Result SAMSUNG Magic D The Samsung Magic Doctor program diagnoses the system i and fixes any problems found Restore the System Cure Exit To run the program click the Diagnose the System button If a problem has been found click on Cure for Samsung Magic Doctor to cure the problem System Information CPU BIOS RAM HDI more The system status diagnostics start Reinstalling Software If you have reinstalled the Windows operating system or the system and program do not operate properly you can re install the driver and program using the system software Media Before You Start This computer is optimized for Microsoft Windows XP therefore drivers for other operating systems are not included on the System Software Media Running the system software Media Insert the system software Media into the CD ROM drive The initial screen appears automatically m Minimum Installation This displays the components driver Windows programs etc that if n
126. tch to Classic View i X Appearance and Themes a Printers and Other Hardware a See Also A Windows Update A 9 Help and Support Network and Internet Connections Y User Accounts Other Control Panel gt ions i5 Add or Remove Programs Date Time Language and Regional E Options J Sounds Speech and Audio Devices Accessibility Options Performance and Maintenance Security Center d Printers and Other Change the settings for your printer Keyboard mouse camera and other hardware Hardware Date Time Language Change the date time and time zone for your computer the language to use and the way E and Regional numbers currencies dates and times are displayed Options Accessibility a i ics m Options Adjust your computer settings for vision hearing and mobility Security PA l Center W View your current security status and access important settings to help protect your PC Windows XP allows to set multiple users with accounts This section describes how to add a user account and to 3 Enter your name and click Next switch a it Select an account type and click the Create How to Add a User Account Account button Then check the created account from the User Account window 1 Click Start gt Control Panel 5 Click the target account and change the user account information Click User Accounts and Create a new Account in You can change the account name
127. ter System Folder f iles Stored on This Computer und Shared Documents LJ SAMSUNG s Documents ard Disk Drives ue Local Disk C Devices with Removable Storage 9 DVD CD RW Drive D Removable Disk E Qn TRANSCEND F Qn Removable Disk G amp Removable Disk H What is a Drive SN A drive is a storage device that can read or write data such as folders and files What is a Folder Minimize button Close button Maximize button Folder Icon Drive Icon Memory A folder is just like a cabinet that keeps files or folders You can keep files or folders of similar kinds in a folder What is a File A file is the minimum unit of materials created by using a program and is also called data How to View the Entire Drive Structure Click the folder icon from the Toolbar to view the drive structure Click the icon again to return to the Fast Operation window Control Panel The Control Panel has a group of tools that enable to configure the Windows related settings Running Control Panel Click Start Control Panel amp Control Panel File Edit View Favorites Tools Help Q Bach amp yo Search Key Folders ies Address Control Panel V Control Panel Pick rs category B Switch to Classic View ir E Appearance and Themes Printers and Other Hardware a See Also T A Windows Update y Q9 Help and Support b Network and Internet Connections QV User Ac
128. ter keep the card separately Supported Cards Transcend Memory Stick PRO s 1GB Memory Stick SD Card Transcend LLL LLL TER 1GB Transcend OLYMPUS MultiMediaCard 120 MMC MMC plus xD Card To Insert and Use a Memory Card 1 Insert a card into the slot according to the directions printed on the slot Example SD Card Click Start gt My Computer The inserted memory card is displayed Windows can perform the same action each time you insert a dizk or connect a device with this kind of file d Music files What do you want Windows to do gt Play using Windows Media Player Create Disc using PowerS tarter Take no action C Always do the selected action Cow J 3 You can save move and delete data by double clicking the corresponding drive My Computer File Edit View Favorites Tools Help S Search 7 Folders AY daress X My Computer Files Stored on This Computer CJ Shared Documents CSR s Documents SAMSUNG s Documents Hard Disk Drives System Tasks View system information D Add or remove programs E Change a setting Other Places My Network Places E My Documents Shared Documents G Control Panel Local Disk C Details yp My Computer System Folder Devices with Removable Storage T SHERI D DVD B SD E Since you can only use the card after formatting it if itis not formatted form
129. ter purchasing it This document includes the computer components and the connection procedures o User Guide The document you are currently reading is the User Guide You can read it by double clicking the icon on the Desktop This document includes the computer functions how to use the functions and how to use the program Utilizating the User Guide Be sure to read the Safety Precautions before using the computer O Refer to the separately supplied Installation Guide when installing your computer Refer to the User Guide for the procedures to use the computer Using the Index of the User Guide you can easily find any information you are looking for Using the Glossary of the User Guide you can easily find meanings for technical terms Q ifa problem occurs refer to the Q amp A included in the User Guide m Some devices and software referred in the User Guide may not be provided and or changed by upgrade Note that the computer environment referred in the User Guide may not be the same as your own environment m The image used for the cover and text of the User Guide may not be the same as actual ones m This guide decribes procedures for both the mouse and the touchpad together m The figures in this guide are provided assuming that your operating system is Windows XP The figures are subject to change m The User guide supplied with computer may be varied depending on model Safet
130. the DVD drive double click the DVD title in the DVD VCD folder of the Library The DVD title is played Playing a Movie Video File The procedures to play a video file registered to the MOVIE Library are described below For the procedures to register files to the Library see page E 116 1 Move to MOVIE Station and double click All Movies 2 Double click a video file The file is played AY AVStation premium File View Play Tools Help MUSIC PHOTO MOVIE mE Recorded TV pyp J veo Playing a Video file not registered to the Library Click File gt Open select a video file to be played and click Open The selected file is registered to the Library and played Playing a Video File in Full Screen Double click the current playback screen Q The video is played in full screen In full screen move the mouse pointer to the bottom of the screen to show the Play Control bar To play at the default screen size press the Esc key or double click the screen Capturing the Video Screen Click Capture Current Screen fS below the Play window when the desired image appears on the screen and click OK Captured images are saved in the C Program Files Samsung AVStation Premium xx Data Captured Images folder In addition you can view captured images in the PHOTO Station gt Captured Images folder Adding Videos to the Library The video files used in AVStation are automatically dded
131. tiVirus on your computer Windows cannot recognize the program until you configure the settings displaying a Security Alert icon When you first use or install Norton AntiVirus for the first time follow the Registration Wizard steps to configure the registration settings To protect your computer from virus attacks with the latest updates click Options to display the Norton AntiVirus Options window From the left menu of the window check Run Automatic Protection to select Automatic Protection and check Run LiveUpdate to select LiveUpdate Two virus scanning programs on one computer may cause system conflicts Remove one of the programs from the system Other Questions A5 If Windows does not recognize the existence of an anti Qi memory capacity is not properly recognized virus program even when it has been installed your computer could be vulnerable to attacks from the Internet by Windows You should install an anti virus program that your computer A Windows XP SP2 cannot display a memory is able to identify capacity over 4GB due to license and driver Check the following programs which Windows can compatibility problems Even if the system information shows only 3GB of memory the system memory capacity is 4GB and is normal detect and select one from the list A list of anti virus programs that Windows can detect Symantec Norton Anti Virus NetworkAssociates McAfee TrendMicro ComputerAssociates
132. to the Lib The MOVIE Library is a library holding video files to be R R used by MOVIE Station The procedures to add video files saved on the computer to the Library are described below You can add files add folders or search and add files As an example the procedures to add folders are described below Click the Register a File M button below the Library and click Add by Folders BES Fw A ia O O O Q BE Add by Folders Select a folder which includes video files and click OK The video files in the folder are added to the Library Chapter 6 Settings and Upgrade LCD Brightness Control BIOS Setup Entering the BIOS Setup The BIOS Setup Screen Setting a Boot Password Changing the Boot Priority Upgrading Memory Using the Security Lock Port 118 119 119 121 123 125 126 128 LCD Brightness Control You can adjust the LCD brightness in 8 levels Adjusting LCD Brightness Using Keyboard Press the Fn or Fn to adjust the brightness of LCD The LCD brightness has eight levels of degree By pressing the Fn ta the LCD gets brighter by one level of degree LCD Brightness The LCD brightness settings for maximum battery mode general mode and maximum performance mode in Samsung Battery Manager are not maintained when your computer reboots Only the LCD brightness setting in the user settings mode is maintained once you reboot the computer For information on the other fe
133. ts WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off Keyboard Touchpad CD Drive Inserting and Ejecting a CD Burning a CD Multi Card Slot Connecting a Monitor TV Connecting a Monitor Connecting a TV Viewing Through a Monitor Using Dual View to View Extended Screen Chapter 3 Using Microsoft Windows XP Adjusting the Volume Using Recorders About Microsoft Windows XP Tour Windows XP Help and Support Windows XP Screen Layout Desktop Start Menu Window Control Panel Running Control Panel Running the Control Panel User Account Changing Resolution and Color Wired Network Wireless Network Connecting to Wireless LAN Connecting to computer to computer networks peer to peer or ad hoc Wireless Network Setup Using the Wireless LAN Setup Program Using Samsung Network Manager Perform Network Settings Using the network after moving location Sharing Internet Access Checking Network Status Connecting with a Modem Introducing Programs CyberLink PowerDVD Samsung Update Plus Using AVStation premium Getting Started and Screen Layout TV Station MUSIC Station PHOTO Station MOVIE Station 91 94 95 97 97 104 108 113 Chapter 6 Settings and Upgrade LCD Brightness Control BIOS Setup Entering the BIOS Setup The BIOS Setup Screen Setting
134. tured or authorized by Samsung Electronics enquire at your service center before connecting the device There is a danger of damaging the product Custody and Movement Related When moving the product turn the power off and separate all connected cables first The product might be damaged or users may trip over the cables For long periods of not using the notebook computer discharge the battery and preserve as it is detached The battery will be preserved at its best condition Do not operate or watch the computer while driving a vehicle There is a danger of a traffic accident Please concentrate on driving Cautions on Preventing Data Loss Hard Disk Management Take care not to damage the data on a hard disk drive m A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk m lake extra care because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive m he company is not liable for the loss of any data caused by customer such as the careless ness usage or bad environmental condition Causes that may damage the data of a hard disk drive and the hard disk drive itself m he data may be lost when an external impact is applied to the disk while disassembling or assembling the computer m he data may be lost when the computer is turned off or reset by a p
135. twork Place gt View network connections on the Desktop Q Right click over Wireless Network Connection and select Disable A2 The Wake On LAN function is configured so that it is supported in Standby mode S3 To use this function in Hibernation mode S4 or in the Turn Off S5 state configure it as follows Enter BIOS SETUP and select the Boot menu Q Move to the Wake On Lan item and press the Enter key Change it from Disabled to Enabled and press the Enter key When I connected 100Mbps wired LAN and the computer exits standby hibernate mode a message informing 10Mbps wired LAN connection appears A When the computer exits standby hibernate mode restoring the network takes about 3 seconds When the network is restored it operates in 100Mbps Wireless LAN Related Q cannot find an AP gt Check the Wireless LAN LED A Check if the Wireless LAN LED is on If off press the Wireless LAN On Off button lt Fn gt lt F9 gt to turn it on gt Reinstall the driver A Reinstall the driver using the software media gt Check the Wireless Zero Configuration WZC service A Ifthe Windows cannot make this wireless connection message appears while searching for wireless networks it indicates that a program other than Windows is set to manage the wireless LAN settings gt To use the wireless LAN settings using Windows A Click Start gt Control Panel gt Network and Internet Connections Netwo
136. uently used D ro g rams P Log Off o Turn Off Computer My Computer er Displays the contents of the hard disk the CD ROM drive the network drive s and floppy disks It can also be used to search and open files and folders 090000099000000900009000000000090000000000090090000000900000900000000900000000000090090000000090000090090000900000000099000000000000090900000000000900000000009000000009000090090000000900000900000000000000009000009009000000000000090000009000900000090000090000000090000000000000009000000009000009 Help and A P e Provides on line help information on Windows and troubleshooting Support Search jJ Enables users to search for information in files or the Internet Run 27 Run programs or documents A window is a basic foundation for operating your computer For instance a window of your computer is configured as follows Click Start gt My Computer Displayed menus and names may be varied Double click the Local Disk which is a hard disk drive to view the folders and files saved in your computer If any folder or file is not shown click Show Folder Contents Menu Bar Title Bar Toolbar Fast Operation Window My Computer Q Bat Q 27 Pp Search Folders E Y My Computer System Tasks View system information i Add or remove programs GB Change a setting Other Places amp My Network Places E My Documents gg Shared Documents Control Panel Details My Compu
137. ug with a grounding part Failing to do so may cause electric shock hazard If water or another substance enters the power input jack AC adapter or the computer disconnect the power cord and contact the service center Damage to the device within the computer may cause electric shock or fire hazard Battery Usage Related Keep the battery out of the reach of infants and pets as they could put the battery into their mouths There is a danger of electric shock or choking Usage Related Disconnect all cables connected to the computer before cleaning it If you are using a notebook computer remove the battery There is a danger of electric shock or damage to the product Do not connect a phone line connected to a digital phone to the modem There is a danger of a electric shock fire or damage to the product Do not place any container filled with water or chemicals over or near the computer If water or chemicals enter the computer this may cause fire or electric shock If the computer is broken or dropped disconnect the power cord and contact a service center for a safety check Using a broken computer may cause electric shock or fire hazard Avoid direct sunlight when the computer is in an air tight location such as inside a vehicle There is a danger of a fire hazard The computer may overheat and also present opportunity to thieves Upgrade Related EL fe
138. ung Update Plus Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your Samsung computer to the latest version Before You Start To search for updates and update your computer using Samsung Update Plus your computer must be connected to the Internet The update search result may differ depending on your computer model Samsung Update Plus does not provide updates for applications installed after purchasing the computer To update the software and drivers Click Search and Install Updates and click Search for New Updates Select Start gt All Programs gt Samsung gt Samsung Update Plus gt Samsung Update Plus Samsun Update Plus Search and Install Updates Search and Install Updates Search for New Updates 1 1 1 1 1 D H T z If th IS IS the fi rst ti me you are ru nning the prog ram gt View Installed Updates Samsung Update Plus automatically searches downloads and installs the latest versions of pre installed Samsung software and drivers for your a window will appear aski ng you if you agree to the system Please click on the Search for Updates button to begin searching gt Configuration for new updates agreement in the window Click Agree to use this software 9 Windows Update If there are available software or driver updates for your computer the available updates will be listed Select the required updates from the list and
139. void losing any important data and backup your data to prevent any such data loss Precautions for Operating System Support The operating system OS installed on this product is the latest version of Windows Vista You cannot install an operating system other than Windows Vista as well as any unauthorized copy of Windows Vista Example When trying to install Windows Vista Home Premium when Windows Vista Home Basic is already installed Other operating systems Windows 98 Windows ME Windows 2000 Windows 2003 server UNIXand LINUX other Windows Vista versions etc other than the operating system already installed on this computer are not supported If a problem occurs because of the installation of another operating system the company will not provide technical support a replacement or refund and if our service engineer visits you due to this problem a service charge will be applied In addition installing a program that does not support Windows Vista may cause the program to not work properly In this case ask the corresponding software manufacturer about the problem If you request our services to resolve a problem caused by incompatible software a service charge will be applied Contents Chapter 1 Getting Started Product Features Before You Start Contents Safety Precautions Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statemen
140. while sitting down on a chair m Adjust the height of chair so that your heel is comfortably placed on the floor m Do not use the computer while you are lying down but only while you are sitting down m Do not use the computer on your lap If the computer temperature increases there is a danger of burning yourself m Work while keeping your wrist straight m Usea chair with a comfortable back m Keep the center of your leg weight not on the chair but on your feet when you are sitting on a chair S Eye Position Hand Position Keep the monitor or LCD away from your eyes by at Keep your arm at a right angle as shown by the figure least 50cm m Adjust the height of the monitor and the LCD screen so m Keep the line from your elbow to your hand straight that its top height is equal to or lower than your eyes Do not place your palm over the keyboard while typing m Avoid setting the monitor and LCD excessively bright m Do not hold the mouse with excessive force m Keep the monitor and LCD screen clean m Do not press the keyboard touchpad or mouse with m lf you wear glasses clean them before using the excessive force COMPRE m Itis recommended connecting an external keyboard m When entering contents printed on a paper into the and mouse when using the computer for long periods computer use a static paper holder so that the height of time of the paper is almost equal to that of the monitor 16 Volume Control
141. y Precaution Notations Icon Notation Description Failing to follow instructions marked with this symbol may cause personal injury and or fatality Failing to follow instructions marked with this symbol may cause slight injury to yourself or damage your property Text Notations Icon Notation Description Content included in this section includes information required before using a function Content included in this section includes information required about the function Content included in this section includes helpful information to use the function This notation represents the page number you can refer to for information about related functions or as a Before You Start reference Start gt All This represents a menu path to runa Programs gt program Click the Start button and then select All Programs gt Samsung gt User Guide gt User Guide in this order from the menu Samsung gt User Guide gt User Guide Copyright 2007 Samsung Electronics Co Ltd Samsung Electronics Co Ltd owns the copyright of this manual No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical without the consent of Samsung Electronics Co Ltd The information in this document is subject to change without notice due to improving the performance of the product Samsung Electronics shall not be liable for any data loss Please take care to a

Samsung NP-G15 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents