SATFINDER 3 USER'S GUIDE
Contents
1. Power Consumption Battery Charging Period Battery Operation Life Charge Adaptor Device Charge Screen Type RF Connector PC Connection PC Software Tuner Tone Language Component Test Duration Accessories Leather bag Operating Manual Charge Adaptor Device Charge Satfinder3 User s Guide 950 Mhz 2150 Mhz 32 Satellites 16 frequencies from each satellite between 2000 ile 45000 Automatic 65 dBm 25dBm Automatic Universal Lnb C Band Lnb Onetouch Lnb Mdu1 Mdu2 Single Lnb Ka Band Lnb DBS Lnb Manuel Lnb LnbP21PD Diseq C 1 0 All band level setup Which Port Which Satellite Fast Finding of Satellite Name Changing the Frequency entering again Actual Ber Level Indicator Green Light 6cm x 14cm 8cm 500 gr 13 18V 1V 500 mA 1950 7 4 Lit lon 2 Hours 240 Minutes in Permanent Usage 220V AC input 12VDC output 800 mA 12V 1A 128x32 Lighted LCD F type Connector Rs232 Windows 98 Xp Vista Sharp 194A Audible warning with Buzzer Turkish English French German italian Spanish SMD 6 times a week 13 TROUBLE SHOOTING If the Screen or the Device is not ON The charge of the device might be over Plug it to the charge adaptor and it shall be on after 30 minutes The On Off button in the rare panel might be in the OFF position There might be a short circuit in the2. LNB or LNB cable This might damage your device and any such damages are not under the warranty coverage Your device might be broken or subject to a damage Please apply to your dealer or authorized service in compliance with the Warranty Conditions Please do not try to repair the device yourself otherwise it shall be out of warranty coverage If the Device can not be charged Check if the LED lights on the adaptors are on If the LED light is not on the adaptor might be not connected to the plug properly or it might be broken The battery indicator on the right top corner of the LCD screen shall be seen full when you plug the charge adaptor Your device might be broken or subject to a damage Please apply to your dealer or authorized service in compliance with the Warranty Conditions Please do not try to repair the device yourself otherwise it shall be out of warranty coverage Signal and Quality are not shown in Satellite Direction Setup of your Device You might have not arranged you satellite dish to the correct direction yet There might be barriers such as trees buildings and electricity polls in front of your satellite dish You might have not made the correct LNB Setup Selection in the Menu Leave the Menu and check your LNB setup and LNB values on your satellite dish You might have not made the correct Satellite Setup in the menu Leave the menu and check these setups The frequency you selected might be not broadcasting
3. You can continue the assembly works by using the charge adaptor Satfinder3 User s Guide 8 MENU OPTIONS SETTINGS When your device is turned on if you press ESC key device settings menu will appear In this menu you can set the brightness of the screen tone block out and 6 different language options Turkish English French German Italian Spanish I gt KONTRAST lt 2 gt SES ACIK S gt DIL TURKCE LNB SELECTION When your device is turned on it is directly opened with LNB selection menu In this menu all LNB varieties having World Standards are available If LNB that you will use is out of standards you can make LNB settings in conformity with your Standard from MANUAL LOF option DISEQ C MENU After the selection of compatible LNB DISEQ C menu will appear In this menu we can select the signal in the desired Diseq c Port or select NO DISEQ C option If you don t know Diseq c Switch ports we can see which satellites are connected to which ports of our Diseq c Switch from OTO DISEQ C menu Some Diseq c switchs are produced in a manner of out of standards or poor quality for some reasons So it is possible that your device can t select Diseq c switch But DISEQ C 1 0 protocol is loaded in your computer and ready for usage Satfinder3 User s Guide 9
4. are not under the warranty coverage During the warranty period no workmanship or other fee is demanded from the customer for the periodic maintenance services that are said to be compulsory by the service stations The consumers have the right to apply to the Ministry of Trade and Industry Protection of the Customers and Competition General Management for any problems related to the Warranty Certificates Certificate No Certificate Approval Date Satfinder3 User s Guide 15 Satfinder3 User s Guide 14 GENERAL SAFETY Caution In order to avoid any damage on you or the device please act strictly in compliance with the following instructions Please plug off the power cable and turn off the on off button in the rare panel before cleaning your device and use a soft cloth for this purpose Do not use any accessories or additional apparatus that do not advices by the manufacturer company since they might harm your device While carrying your device protect it against falling and crushes otherwise your device might be damaged You have to carry your device in its bag and do not carry it in tool boxes or together with any equipment that might damage it otherwise any damages that might occur on your device shall be out of warranty coverage Since your device is used outdoors protect it from contact with liquid in rainy and snowy days Contact with liquid might damage your device Charge your device with advised charge ad
5. Y Digital ZATFINDER 7 SATFINDER 3 USER S GUIDE CONTENTS General Basic Characteristics Front Panel Keys Rare Panel Charge adapters Bag amp Rs232 Device Connections Menu Options Search Mode and Satellite and Frequency Signal and Quality Trouble Shooting Technical Warranty Certificate Warranty Certificate Satfinder3 User s Guide 2 1 2 3 4 5 6 7 8 WARRANTY CONDITIONS Warranty period is minimum 2 two years after the delivery of the device The life of the charge adaptors and chargeable batteries changes on the basis of their use all the other components of the product are under the warranty coverage given by our Company Charge adaptors and chargeable batteries shall be delivered by our Company under supply warranty but they are not included in the warranty coverage herein If the device has a disorder during the warranty period the time during the device was at the service for repair shall be added to the warranty period T
6. and overload your lighter charge adaptor Do not open it to repair or examine Satfinder3 User s Guide 6 SPECTRUM Skip to Spectrum screen after Diseq c Polarite Band and AT setup is done Spectrum is a screen which ensures the received analogue signal levels to be displayed on graphical screen by scanning the full frequency band between 950 2150 Mhz The vertexes on screen display the sections strong in terms of signal If the signal levels are very low or very high AT value can be changed in order to monitor easily SATELLITE AND FREQUENCY SELECTION In the memory of Satfinder3 device there are popular information of 32 pieces of satellite and 16 pieces of frequencies You can select by ENTER key the frequency which your mounted dish antenna is desired to measure from the satellite that you have selected SIGNAL QUALITY BER INDICATOR The screen which will be displayed at the end of Satellite and Frequency selection operations is the menu that displays the Signal and Quality Level and also the deadlock sign Here the purpose is to attain the highest quality and level values After finding the signal LOCK sign will appear After Lock sign is displayed you can skip to BER level menu by ENTER key In BER section the quantity of errors is displayed in written The lowest the BER rate is the highest the quality and fineness of the broadcast is Fine tune can be made in LNB by BER indicator Satfi
7. anymore Check this frequency at www flysat com website and you can load the updated frequencies by Satfinder3 www satfinder3 com Update program There might short circuit or disconnection problems in your LNB cable You LNB might have a disorder Your device might be broken or subject to a damage Please apply to your dealer or authorized service in compliance with the Warranty Conditions Please do not try to repair the device yourself otherwise it shall be out of warranty coverage Satfinder3 User s Guide 12 FRONT PANEL KEYS DIGITAL SATAETER UP BACK MENU EXIT LCD DOWN SCREEN ACCEPTANCE BACK PANEL INFORMATION Charge Led Saternver3 12 Volt Charge On Off a D Button LNB Input Beeper Serial Connection Port LNB Output Satfinder3 User s Guide 5 CHARGE ADAPTORS AC 220 V Charge Adaptor Thanks to your electric charge adaptor with 12 Volt output you can have your device charged all the time and use your device at the places where there is no electricity Please avoid any pressure crush and overload on your charge adaptor Do not open it to repair or examine Vehicle Lighter Charge Adaptor With the help of your lighter charge adaptor with 12 Volt output you can have your device charged all the time and use your device at the places where there is no electricity You can charge your device while you re traveling Please avoid any pressure crush
8. aptor or vehicle lighter charge Unsuitable charge devices might damage your charger and result with explosion due to excessive heating and harm your The user shall be responsible for this kind of situations When using charge adaptors use the ones with 12 volt medium feeding ones Do not leave the device on the batteries inside the device left on shall lose their function by the time The life of the lighter charge charge adaptor and batteries changes according to their use and therefore they are not included in the warranty coverage Be careful against short circuits while connecting your device to LNB otherwise LNB and your device might be damaged Service related issues Do not try to repair your device yourself When you open the cover of your device it shall be out of warranty Please apply to your dealer or technical service for all the issues related to your device Satfinder3 User s Guide 3 BASIC CHARACTERISTICS Fast and Precise Direction Finding Frequency based Direction Setup Satellite based Direction Setup Spectrum Analysing Indicator Manuel Frequency Exchange Manuel LOF Exchange Short Circuit Protection Easy Lnb Setup Sharp 194A Tuner Diseq c Switch Easer Auto Diseq c Finding Multiswitch Easer 6 Different Language Options Fast charging in 2 hours Lit Ion Battery Duration of 4 hours Lighted Lcd Screen Long life bag x 14cm x 8cm Signal and Powe
9. he repair period can not exceed 30 thirty work days This period starts as of the delivery of the disorder device to the service station or if the service station does not exist as of the delivery to the seller agent representative dealer or manufacturer If the industrial good can not be repaired within 5 working days the manufacturer has to allocate another device with the same or similar characteristics to the consumer If the device is subject to a disorder due to workmanship or materials during the warranty period the device shall be repaired free of charge without demanding any payment for workmanship components or for any other reason The device can be delivered to the service by person if the device is not delivered by person the cargo and forwarder fees shall be paid by the consumer The disorders stem from the misuse of the consumer shall be repaired against the relevant fees If the same disorder repeats more than twice within a year during the warranty period or four different disorders are seen in the device within one year and the device can not be used continuously for that reason or the time determine for the repair exceeds or there is no service station or a report stating that the disorder can not be repaired by the dealer agent representative or the manufacturer of the device it shall be changed free of charge The disorders stem from the use of the device for any purpose other than those stated in the user s manual
10. make the setup in SATELLITE menu by ENTER key after pressing and changing by DOWN and UP keys Frequency Selection Menu will appear Approximately 16 pieces of current frequencies can be recorded in memory under each satellite in the device Select the frequency which you will set through pressing UP and DOWN keys changing frequencies by ENTER key Signal Level Menu displaying the signal and quality values will appear Now the Satfinder3 setup has finished You have to move the Satellite Dish and find the right direction At that moment you can see that the values in the Signal Level Menu are moving Te logic here is to complete the satellite dish setup at the highest level When you see that the level is not going higher anymore When the LOCK SYMBOL appears on the screen If not continue the transaction you have to do the LNB polarity setup With the help of this setup you shall be able use the LNB power with the full extent When you finish the LNB setup the LOCK SYMBOL will completely appear on the screen and it will not go off Now all the transactions have been completed and the frequency you have chosen for the satellite you desired were set up at the best values You can start cabling transaction Since the device is charged you don t have to use the charge adaptors while doing satellite dish setup or LNB polarity setup If your charge is over you can use the charge adaptors to operate the device Don t wait the device to be charged
11. nder3 User s Guide 11 SEARCH MODE After making Diseq c setup SEARCH MODE menu will appear In this menu you can select frequency from READY LIST enter a new frequency have a look at which satellite the available dish antenna is turned towards by AUTO SEARCH or see the spectrum picture of selected Polarity or Band by SPECTRUM menu if desired READY LIST In the memory of Satfinder3 device there are popular information of 32 pieces of satellite and 16 pieces of frequencies You can find the orbit of the satellite to which you want your dish antenna to look towards from this menu and select it by pressing the ENTER key The satellites are shown in this menu as in the following picture Note After selecting the satellite you can change the ready frequencies if you press on BACK key in frequency menu NEW FREQUENCY If you would like to set a frequency that is not available in our frequency list you can enter our new frequency from this menu measure the signal and quality levels AUTO SEARCH If you make the satellite dish setup directly without choosing a satellite and than a frequency from your device memory and want to see the frequencies in the satellite where the satellite dish was turned towards select this menu by pressing the ENTER key Satfinder3 User s Guide 10 Satfinder3 Leather Bad with Stripe Thanks to the leather bag of Satfinder3 you can use your device from the
12. negative effects of rain and snow and the crushes The leather bag can be worn on your waist or hung to neck It enables you to carry the device very easily RS232 Cable You can load the software frequency changes and various updates via computer into your Satfinder3 device by Rs232 cable with 9 pins female male Satfinder3 User s Guide 7 DEVICE CONNECTION AND OPERATION Connect the LNB cable of your satellite dish to the LNB input of Satfinder2 Turn the On Off button of the device to I or On position Your device shall be turned on and the menu shall come to the LCD screen In LNB menu select one of the options according to the LO characteristic of LNB used in your dish antenna and press ENTER key Device will skip to DISEQ C menu If there is Diseq c switch in the system select Diseq c port if not select NO DISEQ C option If you know that there is Diseq c Switch in the system but don t know which satellite is in which port ENTER OTO DISEQ C option so the device will display the Diseq c ports by itself After doing the Diseq c setups SERACH MODE menu will appear In this menu you can select frequency from READY LIST enter a new frequency have a look at which satellite the available dish antenna is turned towards by AUTO SEARCH or see the spectrum picture of selected Polarity or Band by SPECTRUM menu if desired 32 pieces of satellite memory are found in the device Select the satellite of which you will
13. r Level BER Level Frequencies of 32 Satellites 16 Frequencies from each satellite Frequency loading from the PC Light and easy carriage One touch Memran thanks to the sensitive one touch keys in Satfinder2 easy and fast use Serial Comport Connection you can update and load frequencies using Serial Rs232 connection Sharp 194 Tuner thanks to the Sharp Tuner you can setup the signal in a precise and fast manner Easy charge you can charge your device with the charge adaptor via that lighter charger under any condition LCD Screen you can use illuminated LCD screen during the day and night Leather bag Satfinder2 is more durable thanks to the leather bag that can be worn on the waste and neck Automatic Finding of Satellite and Diseqc Through selection of AUTOMATIC SATELLITE or AUTOMATIC Diseq in the menu Satfinder3 indicates which satellite it is looking for on its screen 6 Different Languages Turkish English Italian German Spanish French Warning Design and characteristics can be changed without given notice Satfinder3 User s Guide 4 TECHNICAL CHARACTERISTICS Frequency Interval Number of Satellites Number of Frequencies Symbol Rate FEC Max Signal Receiving 22 KHZ Measurable LNB Types Short Circuit Protection Diseq C Protocol Spectrum Auto Diseg C Auto Satellite Finding New Frequency Entering BER Level Screen Illumination Dimensions Weight LNB Output Voltage Max
Download Pdf Manuals
Related Search