USER MANUAL - Future Mobility Healthcare
Contents
1. 1 GENERAL Initial adjustments should be made to suit your personal body structure needs and preference Thereafter follow these maintenance procedures FRAME AND CROSSING TUBES Inspect for loose or missing hardware Inspect for bent frame or cross tubes CASTER LOCKS Caster locks easy to engage Caster locks prevent chair from moving when engaged SEAT AND BACK Inspect for rips or sagging Inspect for loose or broken hardware Inspect cane for wear looseness 610 REVO1 REV DATE JAN 1 2013 AQUA NT600 1 GENERAL FRONT CASTERS FORKS Inspect caster fork assembly for proper tension by spinning caster caster should come to a gradual stop X Adjust bearing system if wheel wobbles or binds to a stop Ensure wheel bearings are clean and free of X X moisture Check stem caster journal and lock nut for tightness Inspect casters for cracks and wear X CLEANING Clean seat backrest and armrests X X 610 REV01 REV DATE JAN 1 2013 7 AQUA NT600 GENERAL 1 Troubleshootin 2 O Q WY 4 gt 2 ucl caster assembly JIEYD u 55 5 1 EN pue syeanbs j JO UINL 4513816 1437 1U3IY 9 AAUA NT600 610 REV01 REV DATE JAN 1 2013 2 ARMS 2 Arms WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened s2. FORWARD WHILE SITTING IN THE COMMODE DO NOT LEAN OVER THE COMMODE EDGE DO NOT ATTEMPT TO PICK UP OBJECTS FROM THE FLOOR DO NOT POSITION COMMODE ON THE SLOP DO NOT IMMERS COMMODE IN ANY LIQUID NOT SKILLED INDIVIDUALS MUST ASK FOR ASSISTANCE HELP DURING TRANSFER ONTO COMMODE ALWAYS LOCK ALL FOUR CASTERS IN THEIR OUTWARD POSITION BEFORE TRANFER DO NOT TRANFER ONTO CHAIR ON SLIPPERY SURFACES DO NOT STAND ON COMMODE OR ANY PART OF COMMODE COMMODE IS NOT TRANSPORT CHAIR OR LONG TERM SEATING DEVICE IN CASE OF PROBLEMS DEALER CAN NOT RETURNED COMMODE UNTIL ALL MAINTANANCE OR ANY PROBLEMS ARE SOLVED 610 REVO1 REV DATE JAN 1 2013 4 AQUA NT600 1 GENERAL Features FEATURES SPECIFICATIONS e User Weight Limit 600 Ib e 24 26 Frame Wide e Chair Width 24 or 26 e 18 Depth e Seat Depth 18 e Fixed Height Full Length Arms e Chair Length no Footrest 27 32 e Seat to Floor Clearance Height 17 18 19 e Chair Length with Footrest 38 e S toF Clearance under Potty 13 714 15 e Chair Height 38 to 41 e 5 Plastic or Stainless Steel Casing Dual locking e Chair Weight 50 Lbs Casters Without front riggings e 70or60 Degree Swing away Front Rigging with Footplate e Choice of 2 colors White or Electro polished natural Stainless Steel e Back Support Foam skinned rectangular shaped back easy to remove and clean 610 REVO1 REV DATE JAN 1 2013 5 AQUA NT600 Safety Inspection Checklist
3. USE CLEANING PRODUCTS WITHOUT CONSULTING THE PRODUCTS INSTRUCTIONS AND TAKING APROPRIATE PRECAUTIONS FOR HUMAN EXPOSURE TO CHEMICALS 610 REV01 REV DATE JAN 1 2013 19 AQUA NT600 8 WARRANTY 8 Warranty Future Mobility Healthcare Inc FMH warrants its Agua Rehab Commode NT600 Wheelchair to be free from defects in materials and workmanship for one 1 year from the date of purchase The frame is warranted for 2 years of the original purchaser user If within this warranty period the product shall be proven to be defective such product shall be repaired or replaced at FMH discretion FMH s sole obligation and your exclusive remedy under this warranty shall be limited to the repair and or replacement of the product or its parts This warranty does not include any labour or shipping charges incurred in replacement part installation or repair of any product For warranty service please contact the dealer from whom you purchased your FMH product In the event you do not receive satisfactory warranty service please write directly to FMH Provide the dealer s name address model number date of purchase and indicate the nature of the defect DO NOT return products to FMH without our prior consent The defective unit or parts must be returned for warranty inspection within thirty 30 days of the return authorization date FMH will issue a return authorization number Please prepay all shipping charges C O D shipments will be refused L
4. FOUTURE MOBILITY HEALTHCARE INC 610 REV01 REV DATE JAN 1 2013 AQUA Rehab Commode NT600 p USER MANUAL CONTENTS ETENE e E 3 Operating Salty MALAM SS a ta e danses tete edi vi v RM esa paste uice Leu Deep osa daikid 4 FOAL 8 lt A 5 MSB EEH oda L usu ua Sa m ela ai kii Mia aa Siqa aypa kaa sa 6 SFO OE 11 u mL 8 Almaas ulatusliku 9 BIOK M UNUM MU MS 11 Hine ANSA AEK UII 12 Reinserting the BackTraliies u Q u QS aD kaia 13 c r 14 Adj sting Casters high and ngaglng uy y scar n i Pn oM a ed EE uu ae Cal Sun evi eeu Cu FETU qe VV an 14 Casters eng aBIDB eisdem ovs a RR aos SRL erect reir a un AC Pte EC er a Rr nese uD a m PT pde wa Shu 14 11214 hcec I MICI MM t M as 15 o y AD 16 FO OU gc meter uU PERPE 17 aua Oe saya says 18 610 REV01 REV DATE JAN 1 2013 2 A
5. IMITATIONS and EXCLUSIONS This warranty shall not apply to problems arising from normal wear or failure to adhere to the enclosed instructions Products subjected to negligence accident improper usage maintenance or storage or products modified without FMH written consent including but not limited to modification through the use of any unauthorized parts or attachments products damaged by reason or repairs made to any component without the specific consent of FMH or products repaired by anyone other than a FMH dealer Such evaluation shall be determined by FMH The foregoing warranty is exclusive and in lieu of all other expressed warranties It shall not extend beyond the duration of the expressed warranty provided herein and the remedy for violations of any implied warranty shall be limited to repair or replacement of the defective product pursuant to the terms contained herein FMH shall not be liable for any conseguential or incidental damages whatsoever This warranty shall be extended to comply with all state laws and requirements 610 REV01 REV DATE JAN 1 2013 20 AQUA NT600 8 WARRANTY m A Warranty Registration Form To validate your Future Mobility HealthCare warranty please complete the below form and return it the address at end of this form Visit online at www futuremobility ca for more Future Mobility Products Name Str
6. QUA NT600 1 GENERAL 1 General NOTICE Information contained within this document is subject to change without notice WARNING DO NOT install this equipment without first reading and understanding this instruction booklet If you are unable to understand these instructions contact a healthcare professional dealer or technical personnel before attempting to install this equipment otherwise injury or damage may occur NOTE Check all parts for shipping damages before using In case of damage DO NOT uses the equipment Contact the Equipment Supplier for further instructions 610 REVO1 REV DATE JAN 1 2013 3 AQUA NT600 1 GENERAL Operating Safety Warnings Please read and obey all instructions and warnings listed in this manual ignoring these warnings could result in serious injury to the patient or attendants NEVER LIFT THE WHEELCHAIR BY THE ARMRESTS OR FRONT RIGGING ALWAYS TEST THE STABILITY OF THE CHAIR BEFORE USE NEVER STAND ON THE FOOTPLATES DURING TRANSFERS IN AND OUT OF THE COMMODE ENSURE WHEEL LOCKS ARE FULLY ENGAGED WHILE STOPPED ON ANY INCLINE DECLINE AND WHILE PATIENT IS TRANSFERRING TO THE COMMODE OR WHILE TRANSFERING FROM THE COMMODE NEVER USE THE CASTER LOCKS TO STOP OR SLOW DOWN A MOVING WHEELCHAIR ITIS NOT RECOMMENDED TO TRANSPORT USERS IN VEHICLES OF ANY KIND WHILE SEATED IN THE WHEELCHAIR DO NOT USE ANY KIND OF WHEELCHAIR TIE DOWN RESTRAINTS THAT ARE NOT APPROVED BY THE FDA DO NOT LEAN
7. ST 610 REV01 REV DATE JAN 1 2013 11 AAUA NT600 3 BACK Lifting the Back frame LIFTING THE BACK FRAME FOR DETAILED CLEANING OR MAINTANANCE 1 Remove the two 2 safety snap clips by pulling back from the back 2 Lift the frame up SAFETY SNAP CLIP PIN 610 REV01 REV DATE JAN 1 2013 12 AQUA NT600 Reinserting Back frame REINSERTING THE BACK FRAME AFTER DETAILED CLEANING OR MAINTANANCE 1 Reinsert the frame 2 Reinsert two 2 Safety snap clips SAFETY SNAP CLIP PIN REINSERTED 610 REV01 REV DATE JAN 1 2013 3 BACK SADDLES ON BOTH SIDES HAS TO FULLY SEAT ON THE SADDLE PINS ON THE MAIN BASE FRAIM 13 SAFETY SNAP CLIPS HAS TO BE FULLY INSERTED ON BOTH SIDES AAUA NT600 4 CASTERS 4 Casters Adjusting Casters high and engaging 1 Remove the snap clip A by pulling back from N the frame N 2 Set the desired position of the caster B 3 Insert back snap clip into hole C 4 Do same for all other casters DO NOT ATTEMPT TO USE CASTERS POSITIONS FOR ADJUSTING FRAME ANGLE Casters engaging For engaging the dual lock step on the end until it latches In the ON position For disengage step on the raised end until caster lock latches in the OFF position 610 REVO1 REV DATE JAN 1 2013 14 AQUA NT600 5 SEATINSTALATION 5 Seat Installation TO INSTALL THE SEAT 1 Slide the rear of the seat over the rear square cross tube as the front of the seat is lowered onto th
8. e frame Rear brackets has to hook on square tube 2 Lower the front of the seat until the front seat brackets snap and nestle onto the front support cross tubes 3 Check to make sure that all brackets are engaged SNAP IT HOOK IT 610 REVO1 REV DATE JAN 1 2013 15 AQUA NT600 5 SEAT INSTALATION Installing the Potty 1 Removal of the Potty is achieved by sliding the Commode outside from back 2 Reinserting Potty is achieved by pushing inside into wire slider until is fully positioned and engaged AQUA NT600 610 REVO1 REV DATE JAN 1 2013 16 6 Footrest 1 Remove the front rigging assembly 2 Loosen the 1 4 20 x 1 2 socket head button screw which fastens the footrest hanger to the footrest stem Slide the footrest stem up or down to desired height There should be approximately 2 3 8 of range for the footrest extension 3 Re tighten socket head button screw 4 Repeat this procedure with the other footplate assembly 610 REVO1 REV DATE JAN 1 2013 17 FOOTREST HANGER 6 FOOTREST Ne ADJUSTMENT SLOT 14 20 X 1 2 SCREW AQUA NT600 7 7 CLEANING Cleaning and maintenance Procedure for Cleaning After Each Use Commode Potty e Remove the Commode Potty and empty its contents e Wash the potty with a multi purpose disinfectant detergent e DO NOT USE HOT AIR FOR DRYING Urethane Seat and Back e Use a multipurpose disinfecting detergent to spray sea
9. ecurely otherwise injury or damage may occur ROTATING ARM ASSEMBLY UPWARDS DOWNWARDS 1 Grasp the top portion of the arm assembly and rotate the arm upwards to the position shown in the figure in lower right corner One should notice the arm outer tube sliding along the arm inner tube in order to achieve a large rotation angle and help to support the armrest while it is resting vertically 2 Atthis point the arm assembly should come a stop The occupant can be transferred to another device such as a wheelchair or bed In order to bring the arm assembly down to the horizontal position grasp the top portion of the arm assembly and rotate the arm downwards to the position shown in the lower left corner until the arm comes to a stop 610 REVO1 REV DATE JAN 1 2013 9 AQUA NT600 ARM ASSEMBLY ARM ASSEMBLY IN HORIZONTAL POSITION 610 REV01 REV DATE JAN 1 2013 10 ARM ASSEMBLY ARM ASSEMBLY IN VERTICAL POSITION AAUA NT600 3 BACK Back WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur 1 4 20 X 0 5 SCREWS 6 PC REPLACING THE BACK SUPPORT C 1 Remove the six 6 1 4 20 x 1 2 screws from the back L frame which holds the foam skinned backrest in place x 2 Fasten the new foam skinned backrest with six 6 1 4 20 GS aN fr x 1 2 screws X I MP crane BACKRE
10. eet Address City Country Postal Code Telephone Purchased Date Purchased From Dealer Name and Address Product Purchased Serial Number Print and Mail it to Future Mobility Healthcare Products 3223 Orlando Drive Mississauga Ontario L4V 1C5 Fax 905 671 3377 610 REVO1 REV DATE JAN 1 2013 21 AQUA NT600 8 WARRANTY 610 REV01 REV DATE JAN 1 2013 22 AQUA NT600 8 WARRANTY 610 REV01 REV DATE JAN 1 2013 23 AQUA NT600 INI 38V2H11V3H ALITISOW 2 10 LMS 610 REV01 REV DATE JAN 1 2013 24 8 WARRANTY WO 51 0 5 2 pew 9 Z6 8 9T 88 6 8 T 0 6 9 AN IIAIY ojeging T sn sionpoud YSN e uiqoursininyMWMM e Ayiqourauninig s2iA8512UJ0 Sn IeUuJ 3 LLEE 1 9 S06 TTO ZEZ 888 I1991 1 9 S06 Av ednessissilN 34n1n4 VAVNVI AAUA NT600
11. t scrub with soft brush to clean a dirt e Rinse well and dry by wiping with soft dry cloth e DO NOT USE HOT AIR FOR DRYING e more detailed cleaning remove the seat from commode chair e NOT IMMERSE the commode chair seat in water or cleaning detergent solution Procedure for Cleaning As Needed Frame Armrest Footrests and Other Components e Spray the frame and components with multi purpose disinfectant detergent and scrub with soft brush e Rinse well and dry by wiping with soft dry cloth e DO NOT USE HOT AIR FOR DRYING f needed spray the frame and components with diluted 10 parts water 1 part solution calcium lime removal solution scrub with soft brush and rinse well with water dry with soft dry cloth 610 REVO1 REV DATE JAN 1 2013 18 AQUA NT600 7 CLEANING e DO NOT mix a calcium lime remover with any other liquid or toxic fumes may result It is recommended that the rinsing of Agua Commodes components occur in a well drained area with an industrial steam cleaner or a commercial pressure washer Several times during year the chair and all components should be wiped down with a diluted calcium lime removal solution By wiping down with soft clothes after final rinse risk of mildew buildup will be minimized IMPORTANT DO NOT USE ABRASIVE POWDERS OR SCOURING PADS ON AQUA COMMODE DO NOT SUBMERGE COMMODE IN WATER RINSE AFTER CLEANING TO ENSURE THAT ANY SOAP OR DETERGENT RESIDUE IS REMOVED DO NOT
Download Pdf Manuals
Related Search