User manual, Bellman Visit Telephone Transmitter (GB
Contents
1. test lamp shines green when the test button is pressed for a few seconds If it shines red this implies that the batteries in the receiver need changing 2 Check that the receiver is set to the same radio channel as the telephone transmitter 3 Move the telephone transmitter to another telephone jack Product description 1 Indicator lamp 2 Test button 3 External input 4 Wall fixture 5 Tone switch 6 Radio switch 7 Battery panel TEST E Bellman model 1123 Soliman amp Symfan Address Our office hours are Telephone 46 31 682820 Bellman amp Symfon AB Mon Fri 08 00 12 00 12 45 16 30 Fax 46 31 682890 S dra L ngebergsgatan 30 421 32 V STRA FR LUNDA Sweden Homepage www bellman com Sending us company e mail infoQbellman symfon se2. User manual Bellman Visit Telephone Transmitter GB ena tt Bellman Visit Telephone Transmitter is part of the Visit System Bellman Visit receivers receive signals from the Telephone Transmitter and signals that the telephone is ringing This is what to do 1 Open the telephone transmitter s battery panel and connect a 9V battery 2 Connect the telephone transmitter s contact to the telephone jack 3 For best range hang the unit on the wall free from obstruction Before putting it up you should first wipe the wall surface with the enclosed damp cloth remove the protective tape on the Velcro strip and then attach the telephone transmitter 4 Press in the red test button on the front of the telephone transmitter so that the indicator lamp goes on Check that Bellman Visit Receiver gives a signal Miscellaneous Indicator lamp On the front of the telephone transmitter there is an indicator lamp which shines green when the telephone rings or when the test button is pressed This shows that the transmitter functions When the lamp begins to shine weaker or not at all the battery needs changing Batteries The telephone transmitter is powered by a 9V battery which is inserted under the battery panel on the front of the telephone transmitter Suitable batteries are lithium batteries which last for approx 10 years or alkaline batteries which last for approx five years The battery needs changing if the test lamp shines weakly
3. or not at all when the telephone transmitter is activated Range The range between receivers and transmitters is approx 30 metres depending on the thickness of the walls and the wall materials Thick concrete and metal walls limit the range The range is also influenced if the batteries are low Radio channel On delivery all units are set to the same radio channel If you change the channel in the telephone transmitter you must also change the channel in all other Visit units Adjustments Switches to adjust the radio channel are located inside the battery compartment The radio channel is changed by changing the position of one or more of the radio switches The tone switches to adjust the character and pitch of the sound signals are also located inside the battery compartment Trouble shooting A fault is not always serious Follow the trouble shooting chart below before calling for service Symptom The test lamp on the telephone transmitter shines weakly or not at all when the telephone rings The receiver does not give a signal when the telephone rings Procedure Change the battery in the telephone transmitter Warning Only applicable for lithium batteries Risk for explosion if the battery is incorrectly replaced Replace with the same or similar battery type recommended by the manufacturer Consumed batteries shall be handed in according to the instructions of the battery manufacturer 1 Check that the receiver s
Download Pdf Manuals
Related Search