USER MANUAL
Contents
1. Mountain Mode where applicable 16 Operating the BionX Propulsion System 17 Operating the G2 throttle 19 Programming the Basic Settings 20 Removing and Installing the Rear Wheel 21 Maintenance and Care 22 Cleaning 23 Transporting an Electric Bicycle 23 Repair and Spare Parts 23 Troubleshooting 24 Warranty Information and Guarantee 25 english Usi Sua Description of the BionX SL Propulsion System D G2 Console e Removable G2 console e Illuminated LCD display with battery state of charge e 4 Assistance levels e 4 Generate levels e Backlight and bicycle light controls if applicable e Offers cycle computer functions speed odometer clock average speed trip distance Pt 2 Mer CIS Remote throttle where applicable e Assistance Generate Toggle e Variable control throttle lever Ma 48V Down Tube Battery e Lithium lon Li lon e Removable lockable e TOUCH PORT state of charge indicator e XL 48V 8 8Ah 423Wh e L 48V 6 6Ah 317Wh where available e DC Output Default 6V adjustable from 6V to 12V where applicable Maximum current 2amps Connector Type Jack 2 1mm 2b 48V Rear Rack Battery e Lithium lon Li lon e Removable lockable e TOUCH PORT state of charge indicator e RR XL 48V 8 8Ah 423Wh e RRL 48V 6 6Ah 317Wh where available e DC Output Default 6V adjustable from 6V to 12V where applicable Maximum current2. USER MANUAL english Welcome Thank you for choosing BionXTM It is our goal to provide you with the highest quality electric propulsion systems available and offer you the best possible after sales experience This document serves as a supplement to your bicycle user manual Please read this manual thoroughly even if you are an experienced cyclist Should you be unable to find an answer in the manual please contact your dealer for immediate assistance We have always believed that a bike should remain a bike It is our love of cycling that drives us and a passion that we continue to share with our customers We hope you enjoy your new electrically assisted bicycle for many years to come If you ever have concerns or questions that your dealer cannot provide answers to or have comments relating to this user manual feel free to contact us in Europe at service bike eu bionxinternational com in North America at service bike na bionxinternational com and anywhere else in the world at service bike bionxinternational com english Usi Sua User Precautions We want you to have a fun ride but also a safe one Carefully read the following information even if you are an experienced rider Take the opportunity to familiarize yourself with your BionX electric propulsion system before you take your first trip 8 9 10 11 12 BionX recommends that you have your system installed professionally by an authorized dealer Rea
3. e 4 Assistance levels e 4 Generate levels e Backlight and bicycle light controls if applicable e Offers cycle computer functions speed odometer clock average speed trip distance 22 26 or 37V Down Tube Battery e Lithium lon Li lon e Removable lockable e L 37V 9 6Ah 355Wh e M 26V 9 6Ah 250Wh e S 22V 6 4Ah 141Wh Bion 7 Db 37V Rear Rack Battery e Lithium lon Li lon e Removable lockable e RRL 37V 9 6Ah 355Wh e RR M 37V 6 4Ah 237Wh e DC Output Default 6V adjustable from 6V to 12V where applicable Maximum current 2amps Connector Type Jack 2 1mm 250 250HT 350HT or 500HS Motor e DC rear hub motor e 250 nom output 200 AU amp UK or 250 watt nom 7Nm max 25Nm 5 2 18 4 lb ft torque e 250HT 350HT nom output 200 AU amp UK 250 EU 350 NA watts nom 9Nm max 40Nm 6 6 29 5lb ft torque e 500 nom 500 watt nom 9Nm max 25Nm 6 6 18 4lb ft torque e Weight 4 7kg 10 4lb e Brushless gearless e Generate mode for energy recuperation e Integrated torque sensor Brake switch e A surface mounted reed switch and magnet connected to the BionX console e Upon brake application assistance is shut off kill switch and Generate mode is activated 37V Single LED Battery Charger PL systems 2011 to present e To recharge the 37V Li lon battery e Input voltage 100 240V
4. not need to be completely drained before charging We recommend charging the battery after every ride preferrably when the state of charge display shows less than 50 We recommend that you fully charge the battery when it will not be used for a longer period of time for example before storing it for the winter and then recharge the battery at minimum every three months When the battery is de pleted to the level where there is risk it could fall into deep discharge the battery will signal that a recharge is needed by beeping The battery is fully charged after approximately 4 to 5 5 hours english Usi Sua Power supply SL system charging procedure power supply e Connect the power supply and the battery by inserting the charge connector into the TOUCH PORT the BionX system can be on or off e Connect the power supply to a power receptacle e The battery TOUCH PORT LED ring around the charge connector lights up red upon insertion and then turns to amber during the charging process e When fully charged the colour of the LED ring changes to green The battery charging process is then complete e Following this procedure the charging connector should be disconnected from the battery e During the charging process you can check the battery state of charge through the console if the battery is connected to the system a 48V system can be switched on while it is charging TOUCH PORT red TOUCH PORT amber upon
5. the serial number the dealer s name and the designation of the system model BionX reserves the right to reject the coverage of this warranty if the accompanying documentation of BionX components is not accurate or complete 5 Inthe case of a warranty claim BionX undertakes to either repair faulty system components and or to replace such components at BionX discretion Service Replacement Unit 6 Varranty repairs have to be exclusively performed by BionX Any component to be repaired under the framework of this warranty has to be transferred to the dealer at the client s own expenses and risks and after the completion of such repair has to be picked up at the dealer In the case of rightful warranty claims BionX reserves the right to bear or repay transportation expenses In order to have a previous determination whether a warranty claim is justified or not the end user has to submit his claim to the dealer from whom he purchased the product so that the respective dealer handles the shipment to BionX 7 Costs for repair work performed in advance by persons who have not been authorized by BionX will not be reimbursed In such a case any warranty claim will cease 8 Repair work and or replacement of components during the warranty period does not lead to an extension and or a new start of the warranty period Repair work and direct replacement during the warranty period may be performed with functional replacement components of equal val
6. 2amps Connector Type Jack 2 1mm L IZAH AOS SL Motor e DC rear high torque HT hub motor e Power 200W AU amp UK 250W EU 350W NA e Torque 9Nm 40Nm 6 6 29lb ft e Weight 3 5kg 7 71b e Brushless gearless e Generate mode for energy recuperation e Integrated torque sensor O Brake switch e A surface mounted reed switch and magnet connected to the BionX console e Upon brake application assistance is shut off kill switch and Generate mode is activated Power Supply e Power supply to recharge the 48V Li lon battery e Input voltage 100 240V e Output voltage 26V e Max charge current 3 45A e Output 90W english Usi Fua DO 2 rt robe ht ed I CE vanni Description of the BionX PL Propulsion System G2 Console systems 2011 to present e Removable G2 console e Illuminated LCD display with battery state of charge e 4 Assistance levels e 4 Generate levels e Backlight and bicycle light controls if applicable e Offers cycle computer functions speed odometer clock average speed trip distance Remote throttle where applicable e Assistance Generate Toggle e Variable control throttle lever G1 Console systems 2010 and earlier e G1 console optional throttle lever where applicable e Illuminated LCD display with battery state of charge
7. brake lever with the brake disc on the rear wheel removed from the caliper Insertion of the wheel can be difficult or impossible as the brake pads will prevent the brake disc from sliding in place To Remove the rear wheel Make sure that the system is turned off via the console no illustration Remove the neoprene covers if applicable Disconnect the two cable connections that lead to the motor COMMUNICATION before POWER Disconnect the cable guide from the rear wheel brake only on bicycles with rim brakes not shown 6 Loosen the axle nut on the rear wheel using a 15mm wrench G Slide the rear wheel downwards out of the dropout 21 english ysijsu Installing the rear wheel Guide the rear wheel axle into the dropouts and ensure that the brake disc on models with disc brakes is inserted between the brake pads Ensure that the torque reaction collar is aligned so that it fits into the left dropout no illustration Make sure the axle is inserted all the way into the dropouts Tighten the axle nuts to 40Nm 30lb ft VERY TIGHT This torque is essential for the correct func tion of the propulsion system If you do not have a torque wrench use a normal wrench and then have your dealer check the torque of the axle nuts as soon as possible Use only the original axle nuts otherwise you run the risk of damaging the axle threads Connect the cables POWER before COMMUNI
8. e Output voltage 37V e Max charge current 2A 22V 26V or 37V Two LED Battery Charger PL systems 2011 and earlier e To recharge the 22V 26V or 37V Li lon battery e Input voltage switchable between 115 230V e Output voltage 22V 26V or 37V depending upon model e Max charge current 2A Note the 500 watt motor is not legal in all jurisdictions Check with your local BionX dealer for local legislation and or availability english Usi ua Inserting or Removing the Console Inserting the console e Slide the console into the console mount on the handlebar e Make sure that the console engages securely When inserted correctly you will hear a click Removing the console e Release the console by pushing the release lever on the console mount e Slide the console out of the console mount Inserting or Removing the Battery Inserting the down tube battery Place the battery onto the docking station Slide the battery down the rail gently towards the connector The release arm will begin to move to the closed position as the battery slides towards the connector When the release arm is almost closed hold it in place and simultaneously push in the lock cylinder you will hear a click when the lock cylinder is properly closed pi Pre Removing the down tube battery Turn off the BionX propulsion system via
9. insertion charging wl TOUCH PORT green fully charged Ensure that a completely charged battery is no longer connected to the power supply after the charge procedure is completed Checking the 48V Battery state of charge e Swipe your finger slowly over the TOUCH PORT e Battery state of charge LED will illuminate e Allow ten 10 seconds before checking state of charge again NOTE Battery state of charge Colour 100 75 Green 75 20 Amber lt 20 Red The power supply is suitable for line voltage ranges of 110 115V or 220 230V and com pensates automatically The 48V battery is designed to be charged by a 26V BionX power supply The battery has an integrated charger which permits the use of a small portable power supply Chargers PL 250HT PL 350HT PL 500HS systems charging procedure systems 2011 to present single LED charger e Connect the charger and battery by inserting the charge connector into the charge port The BionX system should be turned off e Connect the charger to a power receptacle e The light on the charger will turn red automatically e The same light will then turn yellow to indicate charging e The light will turn green when the battery is fully charged and the charging process is complete e Following this procedure the charger should be disconnected from the battery NOTE The 37V single LED charger is suitable for line voltag
10. necessary before using the bicycle Transporting an Electric Bicycle A WARNING Make absolutely certain that the bike rack on your car is suitable for the increased weight and the unique frame style of your electric bicycle A rack that is not suitable can be damaged or even break during the transport of the electric bicycle The electric bicycle can be damaged by an unsuitable bike rack When transporting a BionX equipped bicycle on a bike rack always remove the battery and the console In case of inclement weather your motor and system connections should be protected from the elements When travelling by air it is important to understand that a lithium battery is classified as dangerous goods and must be transported by a qualified handler Your battery cannot accompany you and your bicycle on a commercial flight Repair and Spare Parts For repair of your electric bicycle consult a qualified dealer The use of spare parts from unknown sources for example replacement parts from third parties is strictly prohibited If you need spare keys for the battery please contact a BionX dealer Please retain the key number for your records It is located on the battery key as well as on the face of the battery lock cylinder a BionX Key Number 001 NOTE If you are dropping off your bicycle for a tune up or repair always bring your battery keys to the dealer 23 english Usi ua Troubleshooting The system does n
11. problem persists contact an authorized dealer The battery state of charge display on the console does not show full after a complete charging procedure Make sure that you have followed all of the instructions for the charging procedure Let the battery cool off for a few hours and charge it again If the gauge still does not indicate a full charge let the battery cool again fully deplete the battery and charge it again If the problem persists contact an authorized dealer 24 Warranty Information and Guarantee The BionX warranty covers a two 2 year period for all parts of the BionX propulsion systems s to the first owner within the framework of the following conditions 1 This warranty exclusively covers systems provided by BionX excluding all the other bicycle components provided by other bicycle manufacturers 2 This warranty covers the repair and or the replacement of BionX propulsion systems provided that the equipment concerned loses its functionality within the agreed warranty period and also provided that the claim is not related to any of the following cases expressly excluded under this warranty 3 Any other legal provisions particularly with respect to warranty regulations are not restricted by this Warranty 4 This warranty only covers material and manufacturing defects It is only effective with a valid proof of purchase consisting of the original purchase document or receipt indicating the date of purchase
12. throttle Mes cg Tate a P A Note throttle control is variable and the force gauge on the console reacts proportionally a HE j volto Ei Assistance levels 1 4 From amp press for more assist or for less assist Generation 1 4 20 JPA From CY O press for more resistance bo 00 RI attics i or for less resistance cele ao The G2 throttle is only compatible with the G2 console and may not be available in all jurisdictions Check with your local BionX dealer for local legislation and or availability english Usi j3ua Programming the Basic Settings In general all settings of your BionX electric propulsion system are pre set Basic display functions can be set by entering the programming mode Contact your dealer to customize the advanced functions of your system Turn on the programming mode Simultaneously push 0 and D until the display shows 0000 The first zero blinks Change the value of the selection with or and confirm with Select the other digits in the same manner until the desired program is displayed Note For G1 programming substitute mode and crono for power and D cycle respectively and remain the same 2001 SelectkmMhormph 2002 Regeneration brake output for reed switch 0 40 ideally 30 40 2008 Clock dist 2005 Tire circumference millimeters 2009 Flip Display 0 power left 1 power r
13. CATION 6 Keep the motor cables clear of the brake disc on models with disc brakes and the motor casing O Re install the cable of the rear wheel brake rim brakes only and correctly adjust the rear wheel brake no illustration G Place the larger neoprene cover over the plug in connections and the smaller neoprene cover closer to the disc motor to prevent the cables from contacting any moving portions of the motor Maintenance and Care We recommend to have the spoke tension of the rear wheel and the torque of all screws checked by a qualified dealer after the first 200km 125 miles In order to ensure extended use of the propulsion system all plug in contacts of the system should be checked every two to three months and cleaned with a soft and dry brush if necessary It must be ensured that no dirt or humidity penetrates the battery docking station when the battery is removed The BionX motor does not require maintenance 22 Cleaning CAUTION Never use a high pressure washer or a garden hose to clean the propulsion system The force of a water jet could damage the electrical components of the propulsion system We recommend a soft sponge or a soft brush to clean the bicycle Use a moist rag to clean the battery docking station Always use very little water and keep water away from the electrical contacts Check the plug in connections for moisture after cleaning and let these dry if
14. al feeling assistance from the motor A cadence of roughly 80 RPM is ideal this allows for effective response from the torque sensor and efficient use of battery energy When in Generate mode the BionX motor functions as a generator and recharges the battery When going downhill you can regulate your speed by varying the Generate level This Generate function provides a level of braking however it does not replace legally required brakes If the rear brake lever is pulled the drive system automatically enters Generate mode The range can therefore be extended up to 15 depending upon road conditions The Mountain mode uses an intelligent algorithm based upon the effort and the assistance level required The Mountain mode provides the rider with an assistance level optimized for climbing long steep hills Without this mode the motor can automatically revert to an overheat protection mode thereby dimin ishing the assistance provided The Mountain mode can be activated where available by your dealer through a software update of the system 250HT EU 350HT NA Motor performance 35 Se on level L 150 Steep hills un head wind 250 500 Motor performance Assistance Mode A Level of Assist Riding Situation 50 Slight inclines head wind 100 Steep hills strong head wind 4 200 Very steep roads Mountain Mode where available Long steep climbs Generation Mode G Sonde Bin Significant downhill grade tailwind S
15. d all of the enclosed installation and operating instructions from the manufacturer and follow the instructions if any prior to its first use Familiarize yourself with your electric bicycle and the functions of the BionX system in a safe environment before participating in road traffic for the first time Always wear a helmet when riding an electric bicycle for your own safety In some jurisdictions this is the law Make sure that the tires have the pressure recommended by the manufacturer before riding the bike Make sure that the brakes are operating properly before riding the bike Do not use a mobile phone or any other electronic devices while riding an electric bicycle it is imperative that you pay attention to traffic If possible ride in bike lanes and always in the correct direction of traffic Adhere to all valid traffic regulations Keep in mind that other traffic participants may underestimate the speed of an electric bicycle Ride with both hands on the handlebars when riding your electric bicycle Ride as defensively as possible Enjoy your new BionX electric propulsion system Your BionX Team Table of Contents User Precautions 4 Description of the BionX SL Propulsion System 6 Description of the BionX PL Propulsion System 8 Inserting or Removing the Console 10 Inserting or Removing the Battery 11 Handling and Charging the Battery 12 Power supply 14 Chargers 15 Assist Mode Generate Mode
16. e ranges of 110 115V or 220 230V and compensates automatically PL systems 22V 26V 37V charging procedure systems 2011 and earlier two LED charger e Connect the charger and battery by inserting the charge connector into the charge port The BionX system should be turned off e Connect the charger to a power receptacle e The power switch must be set to on and the red LED will illuminate e The LED to the right of the red LED will illuminate yellow to indicate charging e Vhen the right LED turns green the battery is fully O O O O charged and the charging process is complete e Following this procedure the charger should be disconnected from the battery Left LED Right LED Right LED red charger on yellow charging green fully charged A WARNING Check input voltage when travelling with the two LED charger Failure to adjust the voltage switch on a two LED charger to the correct voltage range can result in damage to the charger english Usi Sua Assist Mode Generate Mode Mountain Mode where applicable The BionX propulsion system offers four levels of assist in the Assistance mode and four levels of regeneration in the Generate mode In the Assistance mode your pedaling is assisted proportionally by an electric motor that drives the rear wheel A torque sensor is located on the axle of the BionX motor and measures the effort provided by the rider this produces a natur
17. gers or BionX power supplies Never short circuit the battery by connecting the contacts of the battery Never open the battery as this could damage the battery and possibly lead to overheating The battery cannot be serviced by the user Opening the battery case voids all warranty and product liability claims Never use a battery which has obvious damage to the case s or the battery connector Make sure that the battery is no longer connected to the power supply or charger once the charging operation is complete The Lithium lon battery cells have a low self discharge rate therefore a continuous connection of the battery to the power supply or charger is not necessary We recommend that you fully charge the battery when it will not be used for a longer period of time for example before storing it for the winter and then recharge the battery at minimum every three months It is best to store the battery in a cool location at temperatures between 10 C 50 F and 25 C 77 F Never store the battery in locations where the temperatures can reach more than 45 C 113 F or fall below 10 C 14 F The battery should never be exposed to extreme temperature fluctuations or humidity and always protect the battery during storage from humidity to prevent corrosion of the connectors Never drop the battery Always protect it from physical damage Damage may lead to short circuits and as a result cause overheating of the battery Be a
18. h Your dealer bionxinternational com
19. ight G2 only Code 2001 Code 2002 Code 2004 Select unit km h or mph select with Default value 30 Change with uao or and confirm with and Confirm with change value with and Confirm with O Code 2005 Code 2009 Set tire size in mm Select digits Current setting of main functions is one after another with or and displayed Flip O assist toggle is on confirm with O the right side of console Flip 1 assist toggle is on the left side of console Confirm with A WARNING Do not use other programming codes without consulting your authorized dealer If you type the wrong code please push the O key to exit programming mode 20 Removing and Installing the Rear Wheel We recommend the removal and installation of the rear wheel to be done by a qualified dealer Should you have to do this yourself please follow the instructions below A WARNING Always turn off the propulsion system prior to connecting or disconnecting the motor cables CAUTION It is essential that the axle nuts are tightened to 40Nm 301b ft this assures that the propulsion system functions properly Ensure the torque reaction collar is fully inserted into the dropout The notch on the non drive side must also be facing in the direction of 6 o clock within 5 either way If this notch placement is incorrect please consult your dealer If your bike is equipped with hydraulic disc brakes Do not pull the
20. ot turn on Check the battery and make sure that it is charged The battery must be correctly inserted onto the docking station and the lock must be completely closed Also check that all connectors of the wiring harness are properly engaged and the console is inserted properly If the problem persists contact an authorized dealer The system can be turned on but there is no assist Check that the cables running from the battery to the motor are properly connected with the system turned off Turn the system on If the problem persists contact an authorized dealer The system is continuously in Generate mode When the propulsion system is continuously in Generate mode and cannot be switched back to assist mode by pushing the key the problem most likely lies with the brake switch that is located under the brake lever In this case try to repair the system by turning it off and then on again If that does not solve the problem you can temporarily bypass it by removing the plug in connection from the console to the brake switch A WARNING If you bypass the brake switch you also disable regenerative braking in doing so your BionX system will not provide any additional braking We recommend that you contact a dealer as soon as possible The motor is not as powerful after a repair or service Tighten the nuts of the rear axle to the specified torque 40Nm 30lb ft check that the axle slot is facing in the direction of 6 o clock If the
21. sh Usi j3ua Turn on backlight and bicycle light if applicable Ht an ih Push and hold key for 4 seconds display backlight ou Lt CLG km m d and bicycle light if available battery integrated are DO diar turned on s DIST d5 Turn off backlight Push and hold key again for 4 seconds Select the cycling computer functions Briefly push the D key to change between ti DO duz ea DIST ODO CLOCK AVSPD CHRONO Trip Distance Odometer Clock Average Speed Chronometer To reset the cycle computer functions i LIL h dal Hold the amp key for a few seconds to reset the distance f kmn O chronometer or average speed values to zero gt Dod DO AOL ne AN WARNING If this symbol appears please contact your BionX dealer for service tI a da HE km h n i Mountain Mode where available ee si 7 Hold the button from any level of A or G to i E as A F engage The four assist levels will flash MOUNTAIN will appear briefly Press to disengage G1 Console For the G1 console substitute mode for power and crono for cycle The assistance toggle remains the same Mode Power becomes Power D Crono becomes Cycle Remains the same Remains the same If you require more information on the G1 console please contact your dealer rs Throttle engagement Default min 3km h to engage
22. teep descent 4 Very steep descent NOTE It is recommended that the BionX system should always be turned ON while riding It allows the rider to use the regenerative braking feature speedometer and odometer functions Speeds in excess of 60km h 37mi hr are not recommended Operating the BionX Propulsion System G2 Console Sira i tr Key Key de e a O Power Cycle State of charge indicator NOTE The system performs a self check approximately every hour Do not be alarmed if the system turns itself on briefly and off again or if the TOUCH PORT flashes momentarily Joo ML D LOS pr Dema ad n 6 So bicycle mode 7 Speedometer 8 Trip distance average speed chronometer odometer clock 9 Assist level A 10 Generate level G 11 Wrench symbol Turn the system on Briefly push either top button on the console The battery will beep 4 times and you will see a countdown this is the system perfoming a self check After startup the system is always in as mode no motor assist bike operation To turn the system off briefly push The battery will beep 5 times After 5 minutes of no operation the system turns off automatically Select Assistance Generate level Push key for more less assist see bar fields 1 4 above display A From Mo mode push key to enter continuous Generate mode engli
23. the console no illustration Lightly press on the battery release arm insert the key and turn clockwise The lock cylinder will pop out freeing the battery release arm Remove the battery by opening the release arm Slide the battery upwards on the rail Lift the battery to remove A WARNING Do not force the battery release arm closed or force the battery onto the battery dock This can damage the battery connector english Usi Fua Inserting the rear rack battery Open the lock cylinder please ensure that the key is removed from the lock cylinder Place the battery onto the battery docking station Gently push the battery in a forward direction towards the battery connector Make sure the battery is inserted all the way flush with the docking station cover Push in the lock cylinder until a click is heard Removing of the rear rack battery Turn off the system via the console no illustration Turn the key in the lock cylinder until it pops out Remove the key from the lock cylinder Pull the battery backwards along the battery rail A WARNING Do not force the battery onto the battery docking station This can damage the battery connector or damage the rear light Handling and Charging the Battery A WARNING BionX batteries shall only be recharged with BionX char
24. the model serial or product number on BionX product has been changed deleted blurred or removed The seal and or the serial number decal on the battery housing has been broken or obviously manipulated c In the case of use of the battery in systems that are not approved for such use with this particular product d In the case of the operation of the BionX system with batteries other than the batteries designed for the BionX system refer to user manual e If one or more than one BionX part has been opened altered or repainted 13 This warranty only covers the above mentioned repair work and or the replacement of defective or compromised components It excludes any claims as to the reimbursement of property damages downtimes expenses for renting or leasing equipment travel expenses lost profit or any other claims BionX liability in connection with this warranty is limited to the respective acquisition value of the product 14 This warranty only covers original BionX components The use of spare parts from unknown sources for example replacement parts from third parties is strictly prohibited 15 Warranty will be voided on any system on which it will be concluded that there has been any case of modification or tampering with firmware 26 BionX BionX Design and powered by BionX are trademarks of BionX International Corporation 2012 BionX International Corporation All Rights Reserved 01 4646 EN REVISION A 27 englis
25. ue 9 The two year warranty period starts with the date of purchase Warranty claims must be reported immediately 10 If the battery cell pack does not provide full capacity in the course of normal use or for batteries going through a normal aging process or reduction of performance BionX warranty only covers that within the two year warranty period or within 600 charging cycles whichever event occurs first to the condi tion that the battery provides less than 70 of its initial capacity 25 english Usi Sua 11 No warranty claims are accepted without limitation to other reasons in the case of damages due to the following a External influences particularly falling rocks collision accident and other external events with an immediate external effect due to mechanical powers b Purposeful and or malevolent acts theft and robbery as well as natural hazard events and or acts of mischief c Inappropriate use e g the product was exposed to liquids chemicals of any type and or extreme temperatures wetness and humidity and or if the battery suffers damages due to non compliance with the special instructions set forth in the chapter Handling and Charging of the Battery d Overcharging the battery or not adhering to the instructions of battery handling 12 No warranty claims are accepted without limitation to other reasons a In the case of test maintenance repair and replacement work due to normal use b If
26. ware that used batteries must be disposed of properly mu BiONXDatteries can be returned to BionX to be recycled X Do not dispose of used batteries in regular household trash Charging the battery A WARNING Only use the BionX power supply or charger that was supplied with the system to charge the battery The use of other power supplies chargers can damage the battery The BionX power supply charger should be used exclusively for BionX rechargeable batteries of the specified type Keep the power supply or charger away from water or moisture when charging and or connected to prevent electrical shock or short circuits Do not use a power supply or charger that has obvious signs of damage to the cable housing or the connector Extreme temperatures will affect battery life especially during charging Avoid charging in direct sunlight or in very hot or cold temperatures This will reduce the life of the battery considerably We recommend charging the battery at room temperature approximately 20 C 68 F The battery should be warmed to room temperature before it is charged particularly if it was exposed to cold temperatures during a ride The battery can be charged when mounted on the bicycle or removed from the docking station A Lithium lon battery does not have a memory effect which means that the battery s maximum energy capacity is not affected if it is repeatedly recharged after only being partially discharged The battery does
Download Pdf Manuals
Related Search