User Guide
Contents
1. Use light soap water It is possible to buy FGO 1 to renew the look of the gauge The FGO 1 contains glass front ring and o ring WEMA International AS 47 55942400 tel Original date 27 11 00 N 5164 LAKSEVAG 47 55347269 fax2. WEMA SYSTEM User Guide Tachometer Gauge 8000 rpm ITAC 8K PO fart no 1101007 110104 Revision 1998 5 20 Technical data Supply 12V or 24V DC Consumption 0 50 mA Background light Yellow Waterproof IP56 Range 0 8000rpm Cable connections see drawing cable no 1 red white instr light cable no 2 red pos power cable no 3 blue neg power cable no 4 black alternator W Accessories options Various instr bezels i e VDO F VOL P Spare parts FGO 1 Installation Cut a 52 mm 2 1 16 diameter hole in the panel Unscrew the large plastic nut see bottom of drawing above and insert the instrument through the hole Fasten the plastic nut again and tighten carefully using hands Disconnect the battery during electrical installation As for all other electrical equipment a fuse must be used between the battery and the gauge often this will be common for all instruments and is not shown in diagram above Connect the wires according to the diagram The instrument lighting can be connected to the common power or via a separate switch as indicated above If alternator wheel water pump wheel is not 1 1 adjustment can be done on screw behind rubber seal on back use added tool Adjust carefully until correct reading is achieved Maintenance No periodical maintenance adjustment or lubrication is needed The glass must not be cleaned with strong soap or chemicals as this might destroy the surface of the glass
Download Pdf Manuals
Related Search