INSTALLATION MANUAL
Contents
1. AIR CONDITIONER PART NO 9378782037 03 OPTIONAL PARTS IR RECEIVER UNIT INSTALLATION MANUAL For authorized service personnel only UTY LRH B1 2 FUNCTIONS This mark indicates procedures a which if improperly performed A WARNING might lead to the death or serious RETER indieti iai ndicator lamp injury of the user RED h For the air conditioner to operate satisfactorily install it as TIMER Indicator lamp outlined in this installation manual ORANGE 4 Installation work must be performed in accordance with aea Indicator lamp national wiring standards by authorized personnel only Do not turn on the power until all installation work is MANUAL AUTO button complete e Let the customer keep this installation manual Remote control signal receNer A because it is needed when the air conditioner or IR receiver unit is serviced or moved This mark indicates procedures which if improperly performed AN CAUTION might possibly result in personal harm to the user or damage to property 3 INSTALLING THE IR RECEIVER UNIT 1 REMOVING THE CONTROL BOX COVER Remove the screws 2 places Slide the control box cover in the direction of the arrow Remove the control box cover Do not wire the IR receiver unit wire together with or parallel to the transmission cables remote controller cables and power supply cables of the indoo2. ire as shown in the figure below Fix the wires with the hook Tighten with cable Connect the connector i Wire for Flap Board Y 4 INSTALLING THE CONTROL BOX COVER Secure the control box cover in the procedure that is reverse to the steps in 1 REMOVING THE CONTROL BOX COVER tie Field supply Wire for flap Wire from IR receiver unit
3. r unit It may cause erroneous operation Do not install the IR receiver unit wire near a source of electromagnetic waves 1 MAIN UNIT AND ACCESSORIES The following installation parts are supplied Use them as required Name and Shape Q ty Application IR receiver unit For receiving the gt Control box cover signal from the re mote control unit Strap Prevent IR receiver unit from falling down En 1 Espanol Frangais Deutsch English Italiano T rk e Pycckn Portugu s EAAnvika 2 INSTALLING THE IR RECEIVER UNIT Mount the corner figure to the drainpipe of the decoration panel that has the DISPLAY mark onto the IR receiver unit N b7 24 J es i QS DE A CAUTION This corner must be mounted onto the IR receiver unit Insert the wire from the IR receiver unit into the wiring hole as shown in the figure below and pull it into the decoration panel Wiring hole y Wire from IR receiver unit N IR receiver unit En 2 Hang the STRAP on the hook of the decoration panel After that mount the IR receiver unit onto the decoration panel ane Sw o Pa say 3 WIRING Connect the connector to the Board in the control box Fix the wires with the hook Bundle the 2 Flap wires to the IR receiver unit w
Download Pdf Manuals
Related Search