Home

tw

1. ARM keys once STAY ARM This is for partial arming of the alarm system when there are people at home only some of the selected sensors are activated and could be triggered by events In a STAY ARM status color LCD screen show Stay arming To activate using remote control press STAY ARM key once To activate using keyboard on panel keyboard ARM keys twice DISARM All sensors except the detectors in Emergency and the emergency button on remote control are deactivated and will not be respond to any events In a DISARM status color LCD screen show Disarming To activate using remote control press DISARM key once To activate using keyboard on panel keyboard DISARM keys once EMERGENCY When an emergency occurs press emergency button on the remote or the EMERGENCY button on panel to activate alarm Remark If password on keyboard is enabled you need to enter password before other operations the initial password is 1234 2 2 System Setup 2 2 1 Panel Setup Alarm panel should be installed at a central location with best transmission to all the wireless sensors and accessories Keep the panel well away from large metal objects or household appliances with high frequency interference and avoid barriers such as concrete walls with metal frame inside and fire doors Alarm Panel Diagram Antenne MIC Speaker Telephone line gt H N Power Siren Telephone mo
2. function Syntax Menu gt 3 gt 2 1 gt keyboard password 1 0 saving mode switch Syntax Menu gt 3 gt 2 gt Backlighting switch 1 0 Number of rings Syntax Menu gt 3 gt 6 gt 00 20 Date and time settings Syntax Menu gt 6 gt date and time To enable the password protect of keyboard System default password is 1234 default is off Example the users need to open the keyboard password protection function Press the menu then press 3 then press 2 and then press down key let the cursor moves down to a New password column then press 1 means open then press OK Used to control the clock display energy saving mode for 0 means close for 1 means open The default is open Open is when the alarm panel is in standby after the clock display 20 seconds the alarm panel automatically shut down with color backlight to enter power saving mode Close is when the alarm panel is in standby color screen will light on with clock display Example the user needs to close the clock display energy saving mode Press menu then press 3 then press 2 and then press down key let the cursor moves down to Backlight column then press 0 means close then press OK The system default is 8 times 0 means the remote operation is not allowed and disabled Example the user needs to set up number of rings before picking up to 6 Press menu then press 3 then press 6 Then press me
3. one detector next to panel and try identify the interfering source and eliminate it check Panel power whether plugged well 9 Consistently alarm once power open Phone cord is not connected but the phone alert function is enabled Either disable the phone alert function or connect the phone cord
4. time and different defense zone eliminating of need of the manual procedure realizing the beauty of automatic controls m The host will automatically rob line to call 6 groups preset telephone number when alarm not lost number without power m Support ISD automatic voice mailbox for playback message upon alert Maximum length of voice message is 10 seconds m Telephone phone long distance telephone control for arming disarming monitoring m Wireless intelligent study coding compatible with PT2262 normal encoding and a 1527 encoding convenient and flexible for adding or reducing accessories Maximum support 150 remote control and 150 sensors m Integrated clock chip time will not lose without power m Unique black box features display most recent 72 disarmed records and 102 recent alarm recording Accurately shows the alarm time and zones number Compatible with the international alarm networking protocol CONTACT ID Can realize alarm network With alarm dial up and rob line functions 2 Anatomy of the TFT Color Display Networking Alarm System 2 1 System Components and Usage Arm The system is at a fully ready status where all detectors are activated in a working state when the some events burglar fire gas leak etc happened and detected alarm system alarm right away In a ARM status LCD screen show Arming To activate using remote control press ARM key once To activate using keyboard on panel keyboard
5. up 8 rings Audible confirmation for remote Enable operation Delay alarming Disable 1 99 Zone alarm Siren sound enable 6 4 Fitting parameters Input voltage DC9V 12V Standby currents lt 20mA Alarm current lt 450mA M Wireless frequency 315 433 868 91SMHZ _ 2262 1 5 4 7M EV1527 300K E Backup battery NI HI AAA 6 DC7 2V Alarm loudness 110dB Accessories parameters The alarm should be compatible with PT2262 PT2240 and EV1527 Using PT2262 encoding the resistance is recommended 1 5M 4 7M using with EV1527 encoding the resistance by 300K data recommended 1010 7 Guideline of Installation Sensors 7 1 Guideline for Installing Door or Window Sensor gt Ii B 1 The surface for door sensor installation should be clean so door sensor can be attached to the door and frame firmly with double faced adhesive 2 Each door sensor is a pair of sensor and magnet The sensor A as in diagram should be installed on the fixed door frame and the magnet B as in diagram should be placed on the movable door with a distance not exceeding 1 cm 3 Upon installed door sensor should be tested by open the door and check if the indicator on door sensor flashes for 1 second 4 Incase the door sensor is running out of battery the indicator should be kept lit as a low voltage notification gt 7 2 Guideline for Installing PIR Motion Sensor Angle ae nort A 70 deg Effective Distance ss 8
6. weeks when timing self test information Menu gt 3 gt 8 sending gt relevant parameter Example User code 0000 9999 0000 Arm disarm send 0 3 No send Self test 0 2 Disable Self test time1 08 00 Self test time2 18 00 Self test week 1234567 Means CID user code is 0000 can move the cursor to change change range is 0000 9999 Arm disarm send with four options 0 for no send 1 for only arm send 2 for only disarm send 3 for arm disarm send The self test setting means the panel will link with the alarm center once for certain time to check the panel and alarm receiving center normally communication Self test settings 0 2 0 means self test disable namely the panel is not timing communication with the center l self test timel means with the alarm panel timing communication according to self test time 1 08 00 2 self test time12 means with the alarm panel timing communication according to self test time 1 08 00 and self test time 2 18 00 Self test week means with alarm panel communication on number of weeks 1234567 means with alarm panel communication from Monday to Sunday 23 means alarm panel and with the alarm receiving center timing communication just Tuesday and Wednesday Time 08 00 and 18 00 can be modified according to the customer s requirement Remark if the alarm panel is not connect with the alarm receiving center then no need to set this 3 Commands of System Quer
7. 12 M Before use make sure the power switch of PIR motion sensors is at the ON position Installation height is about 2 2 meters above ground and the optimized detection angle for most motion sensor is 90 degree The sensor should face the detected area with this consideration for best coverage It is advised to install with the face of motion sensor perpendicular to the most probable moving detection of people for the highest effective detection Within coverage of detection there should be no any objects for obstruction There should be no two infrared detectors in the same as they will possibly intervene with each other Avoid the detector facing window cooling or warming machines or other appliances that cause the temperature changing sharply and thus cause false alarm Most infra red detector needs about 5 minutes to heat up before READY for normal operation Regular PIR motion sensor is for indoor use unless the specification stated otherwise Unless specifies otherwise most infra red detector are indoor use and not reliable to use outdoor 8 Troubleshooting Problem Diagnosis Available Solutions 1 cannot dial for e no arming e do arming operation alarm alerting phone unsettled parts improperly installed e g sensors installed too far away code no match e re set according to the specification e coordinating the location of parts e re coding 2 cannot password input wrongly Retype
8. Password or reset long distance password operation 3 no record voice message not recorded e record voice message indication when alerting 4 remote control keyboard out of order coding un matched with the Panel insufficient battery power or battery contact no good battery pieces poor contact or voltage un matched with Panel re learn the remote control change battery to correct type polish the surface of contact of battery contact the local dealer to change the matched remote control keyfob 5 infrared detector out of order low power change to the same type battery 6 Beam detector out of order Check power supply Check if cables short circuit Check beam detector alignment Replaced with a working power adapter Re cabling for perfect contact Make sure pair of sensors aligned by observing the indicators 7 siren without sound siren plug or jack in short circuit or broken line siren out of order closed siren by command positive and ground wires of siren reversed repair or change plug or jack or change the jack line use another siren to double check activate siren by command reverse the wires to try adjust a longer length of siren sounding 8 the distance for host to receive the infrared detector door status switch and remote controller is shortened a nearby emitter is sending code Panel receiver stoppage standby battery of the Panel insufficient move
9. TFT Color Display Networking Alarm System User Guide 1 Introduction 1 1 General Description TFT Color Display Networking Alarm System is designed for both home and business use and is built on leading microprocessor technology It is a choice of stability reliability security and user friendliness It has a built in siren with super high sound volume of 120 dB that is loud enough as an alert for most noisy environment The system allows at most 6 groups of phone number set up for calling notification that make sure you will not miss any happening of incident The LCD on panel displays clear system message and the location of alert together with the keypad on board Wireless connecting PIR door contact ssmoke detector gas detector panic button etc Widely used in homes factories schools shops convenience stores financial and banking workplace community center and residential area to provide protection to valuable assets 1 2 System Features m Large TFT color display humanized menu voice prompt and easy to use m Allow up to 99 wireless defense zones and 2 wired zones m Each can be defined as one of the 8 zone types including NORMAL STAY INTELLIGENT EMERGENCY CLOSED HELP SENIOR WELCOME and CHIME And each zone can be realized switch alarm independently Can realize single defence zone or part of the defence zone to arm m Four sets of scheduled arm disarmed function each timed arm disarm you can select the included period of
10. bout zone types details please refer to the Definitions of Zones instruction in this manual Set mode of wired alarm zone Set wired alarm zone to NO NC or EOL The zone number of 51 52 are wired defense zones system default is 51 52 are wired Syntax 51 wired zones 51 52 0 1 2 Syntax l Menu gt 5 gt defence zones 00 99 gt Points defense zone dial up 123456 zones with NO mode 0 means NO 1 means NC 2 means EOL NO means short circuit to alarm NC means open circuit to alarm EOL mens end of line to alarm Example Set 51 zone to NC Press menu then press5 input 51 then press OK press down key let the cursor moves down to Wired mode then press 1 screen display NC then press OK Remark 1 when set 51 defence zone to be NO in arm status it will alarm from NC to NO between Z51 and GND 2 when set 51 defence zone to be NC in arm status it will alarm from NO to NC between Z51 and GND Generally connecting with two ends of ALARM of wired PIR detector Or wired magnetic door infrared beams wired accessories of NC alarm 3 When set 51 defence zone to be EOL there is a 2 2K resistance between Z51 and GND the alarm panel will prompt 51 defence zones alarm when in NO or NC between Z1 and GND used to strict engineering occasions System default is 00 99 defense zone all will make call from the first to the sixth group phone number upon alarming Example One when setting 2 defen
11. ce zone alarm dial Numbers of 123 Press menu then press 5 input 02 then press OK then press down key let the cursor moves down to sub zone dial Press the menu three times to delete 456 then press OK Example Two set 3 defence zone alarm only dial Numbers of 5 Press the menu then press 5 input 03 then press OK then press down key let the cursor moves down to sub zone dial Press the menu six times to delete original numbers and then input 5 then press OK 2 The related settings with alert receiving center networking Center alarm numbers Syntax Menu gt 1 gt 2 gt _ center alarm numbers Used to set the alarm panel and the alarm center networking alarm receiving center of the number If not connect with alarm receiving center please don t set the two groups of number Example Set Networking center number for 233880065 Press menu then pressl then press 2 center alarm numbers input 23840065 behind Group 1 then press OK Means the first group networking center alarm number has been set for 23880065 Remark if the alarm panel is not connect with the alarm receiving center no need to set this The related parameter Used to set the alarm panel with alarm center networking Set with alarm receiving CID user code arm disarm information is sending or not open center networking or close of the timing self test The setting of self test time to Syntax choose which several
12. ding to the command below User will not be asked for password upon connected and alarm will automatically hang up call within receiving any instruction within 20 seconds 1 arming 3 monitoring open 7 siren on 2 disarming 4 monitoring closed 8 siren off key exit and hang up the system will not dial the next group receive alarm number If not press or 2 the system will continue to dial next group numbers Remark monitoring time for 20 seconds if need to continue please press 3 key within 20 seconds 5 2 Remote Dialing In Operation Remote control operations can be done via any phone You can just dial into the alarm panel and user will be asked for password upon connected and alarm will automatically hang up call within receiving any instruction within 20 seconds or password is incorrect original password 1234 1 arming 2 disarming 3 monitoring open 4 monitoring closed 7 siren on 8 siren off Exit and Hang up 6 Types of Alarm Zone 6 1 Definitions of Zones The alarm supports 99 Wireless defense zones and each zone can be classified into 8 Zone Types with their respective characteristics Type Zone Type Interpretation ID 1 NORMAL Defense The Panel only works on the arming status When Zone disarming there is no response 2 STAY Defense zone Can be shut off solely through the remote control AT HOME Defense Keypad to avoid the Infrared Detectors a
13. down key Press the menu button twice to delete Saturday and Sunday then press down key Press 1 to choose scheduled open then press OK The system restore the factory Settings this function will restore all set to factory Settings eliminate all of the telephone number no break detection remote alarm sound when open the system will automatic answer after rang the bell eight times When Alarm siren sound time for 1 minute Password recovery for 1234 remote control and detector unchanged speech function open Under the condition of the customer forgot password can only use the method of Total System Reset to the factory state First break the power source of alarm panel and then hold the menu key to electricity The panel will keep buzzer five seconds to loosen the menu key At this time restore to empty state the password is1234 and delete all the remote control and detectors 1 Defence zones of related parameter Settings Single defence zone networking events code Syntax l Menu gt 5 gt defence zones 00 99 gt event code 101 631 Used for setting 0 99 defence zone sending networking events code 101 631 when connecting alarm with networking center the system default 0 99 defence zones are sending the burglar alarm 130 information the meaning of events code are as follow 100 means medical aid 110 means fire alarm 121 means robber alarm 122 means mute robbery alarm 130 means burglar a
14. g to the panel siren interface the live power adapter output end into panel hole At this time voice prompt welcome to use intelligent voice alarm The power indicator light up Finally set the backup battery switch to ON state Remark exterior line connect the telephone line from telecommunication bureau Inside connect telephone Not interchangeable in case no dialing 3 2 Setting Alarm Telephone Numbers The model can support 9 groups of phone numbers Each phone number shouldn t exceed 31 digits If you want to set the first group phone number as 13812345678 do as follow Press menu to enter main menu Press 1 to enter Alarm number settings Press 1 again to choose alarm numbers and then input the number 13812345678 after Group 1 then press OK to save Press ESC can back to the menu The other groups number by such analogy Remark For users who use the telephone line extension you should dial a number such as 9 to pick up a dialing tone then with your command you should add to this number a So the completed command becomes 9 13812345678 Note 7 8 9 group number for HELP SENIOR zone and panel will only dial these three groups number when that specific zone alarming 3 3 Delete alarm telephone number If you want to delete the first group alarm number please do as follows Press menu to enter main menu Press 1 to enter Alarm number setting Press 1 again to choose alarm numbers and then press MENU
15. larm Whether defence zone alarm siren Syntax Menu gt 5 gt defence zones 00 99 gt alarm siren 1 0 Defence Zone Types Syntax Menu gt 5 gt defence zones 00 99 gt zones type 1 8 131 means peripheral burglar alarm 151 means gas alarm Example set the second defence zone alarm and center networking sending medical aid information Press the menu then press 5 input 02 then press OK Press the menu button three times to delete the original event code then input100 then press OK Remark if the alarm panel is not connected with the alarm center then no need to set this Used for setting 0 99 defence zone alarm the sirens need or not Can set ring or not ring 1 for ring zero for not ring The system default is 1 Example set the second defence zone alarm the alarm panel will dial up but no siren ringing Press the menu then press 5 input 02 then press OK press down key let the cursor moves down to siren Then press 0 screen display off then press OK To set 99 zone types 00 99 represents 0 99 zone numbers represents one of the 8 zone types NORMAL STAY ARM INTELLIGENT EMERGENCY CLOSED CHIME WELCOME HELP SENIOR Example set the second defence zone for the stay arm zone Press menu then press 5 input 02 then press OK Press down key let the cursor moves down to zone types Then press 2 screen display STAY ARM then press OK 1 8 Remark A
16. nd other zone in room detectors from misinformation when master is resting at home 3 INTELLIGENT If the detector in the Defense zone is triggered only Defense zone once it will not immediately alarm But if being triggered once again within 30 seconds after the first triggering it will not alarm immediately 4 EMERGENCY No matter on arming or disarming status if detector is Defense zone triggered it will alert Usually used in connecting with Smoke Detectors Gas Detectors and emergency button etc 5 CLOSED Defense zone No matter arming or disarming status detectors will not alert even being triggered 6 CHIME Zone No matter in what status when sensor with this zone is triggered a welcome door bell will be ring as notification 7 WELCOME Zone On disarming status when sensor with this zone is triggered a welcome voice message will be played 8 HELP SENIOR Defense Zone This type of zone is for elderly safety no matter in what status the panel will alarm once sensor with this zone type is triggered 6 2 System default zone types are Senior 01 59 60 79 80 89 9o tn 9293 99 6 3 Other System Default Operation password 1234 Remote Control Enable Telephone Line Anti tampering Disable Siren Sound 1 minute Delay ARM No 51 52 wired zones Normal Open Integrated Alarming Enable Number of rings before picking
17. nu twice to delete the original times then input 06 press LOK Example The users need to close remote control function Press menu then press 3 then press 6 Press menu twice to delete the original times then input 00 then press OK Set the system date and time Example the time now for 09 00 on Ist May 2012 Press the menu then press 6 input 2012 05 01 09 00 00 then press OK The weeks no need to input the system will automatically calculated Scheduled Scheduled Arm disarm to the alarm panel alarm panel into the Arm Disarm arm disarm status in the set time can be set four groups Syntax Menu gt 3 gt 7 gt 01 04 gt Arm disarm time and weeks selection and the scheduled time week to open or closed Restore factory settings Syntax Menu gt 3 gt 0 Total System Reset Syntax Press and hold the menu key to power on arm disarm time And defense zones and weeks can be selected And can choose the group scheduled Arm disarm with open or closed Example the user need from Monday to Friday alarm system into arm state at 23 00 the arm defence zone is set to 1 50 defense zone 07 00 into the disarm state Press menu then press 3 then press 7 then press 01 then press OK Press the menu button four times to delete the original arm time input 23 00 then press down key Press the menu button four times to delete the original disarm time input 07 00 then press
18. ound closed for 1 means open zero means close the system default is open Example to put the remote control Numbers for 01 press arm disarm key siren sound not ring Press menu first press 3 then press 4 input 01 then press OK then press 2 to shut off Syntax Menu gt 3 gt 4 gt 00 99 gt 1 2 Enable or disable Cut the phone cord will trigger the alert 0 is off and 1 on of the anti tampering system defaults is off of telephone cord Example telephone lines have been cut off request the host siren Syntax sound Menu gt 3 gt 9 Press menu then press 3 then press 9 then press 1 to select gt 1 0 detection open then press OK Set length of Set alarm length of sounding when panel alarm could be set to Siren sound 0 20 minutes factory default is 1 minute Syntax Example the user need to set up alarm time for five minutes after Menu gt 3 gt 5 the alarm gt sound time 00 20 Press the menu then press 3 then press 5 minutes Press menu key twice to delete the original time then input 05 then press OK It was set for 5 minutes Upon armed from the remote control or alarm panel the alarm system arm panel is set to delay 0 99 before at the ready status of ARM Syntax The system default is 00 seconds Menu gt 3 gt 1 Example users need to set the delay time for 60 seconds gt arm delay time Press menu then press 3 then press 1 00 99seconds P
19. ress menu key twice to delete the original time then input 60 then press LOK which was set for 60 seconds Set the time of Set the time of delay upon alarm it can be set to 0 99 seconds delay for alarming the system default is 00 seconds Syntax Example the user need to set alarm delay time for 60 seconds Menu gt 3 gt 1 Press the menu then press 3 then press 1 gt alarm delay time Then press down key let the cursor moves down press menu button 00 99 seconds twice to delete the original time then input 60 then press OK which was set for 60 seconds Siren volume Valid volume is from 00 to 99 as largest system default is the adjustment largest Syntax Example users need to set volume to 50 Menu gt 3 gt 5 Press menu then press 3 then press 5 then press down key let the gt Siren sound 00 99 cursor moves down Press menu button twice to delete the original volume then input 50 then press LOK which was set for 50 Remote control This password for the user remote operation and keyboard lock password password System default password is 1234 Syntax Example the users need to change the new password for 4321 Menu gt 3 gt 2 Press the menu then press 3 then press 2 gt _ 4digits new Then press menu button four times to delete the original password password then input 4321 and press OK The new password is changed to 4321 Keyboard password protection
20. serias J Backup li battery switch E i wt Door sensor How to connect wired NC alarm accessories 226 Giedederescae JooERi HDI OOT wo owi W Ra a Tc no Q DOGG OF Beam Beam transmiter Nig Receiver 0 7M Detecting distance 1 0m How fo use resistance to connect Beams Detector and alarm control pane 2 2 2 Summary of Indicators Function Indications Description Built in speaker short beep once Confirming key received signal beep beep two short tones Exit configuration or learn succeed beep beep beep three short tones Error indication Voice prompt The function and status of the prompt voice Light up Panel external power supply is normal Power LED Is off External AC blackout internal battery power supply Light up The panel is alarming Is off Without alarming ARM LED Flashing Delay alarm Show Disarming In DISARM status TFT color display Show Arming In ARM status Show Stay arming In STAY ARM status Show xx zone ALARM Enter into ALARM status LCD show the exact zones information Show 98 zones ALARM EMERGENCY button was pressed Show 97 zones ALARM The panel was detached or moved the anti detach switch alarm 3 Installation of Panel 3 1 Alarm Panel Initial Setup First connect telecom line to the panel outside interface the inside interface connect a telephone Siren plu
21. te 22th remote control then input 22 Press to delete all remote controls later press OK to delete certain zones remote control or all remote controls 3 7 Add detector Press menu to enter main menu Press 2 to enter Add accessories Press 2 to enter add detector the menu would be indicate that type the Number 00 99 if add 1st detector please input 01 add 89 input 89 later press OK to save the settings Then press any key of the detector to send a signal to the alarm panel Panel beep twice voice prompt Set successful and LCD display has been saved means successful If beep only once means this detector has been configured before Alarm panel can configure up to 150 detectors of different addressing 3 8 Delete detector Press menu to enter main menu Press 2 to enter Add accessories Press 4 to enter Delete detector then type the Number 00 99 if delete 1st detector please input 01 delete 89 input 89 Press to delete all detectors later press OK to delete certain zones detector or all detectors 4 Command Reference Voice Open and When remote voice open or closed 1 for open 2 for closed Closed system default is open Syntax Example when press arm disarm on the remote control the host horn Menu gt 31 gt 3 speech shut down gt 1 2 Press Menu 3 3 then press 2 to close the voice Remote Control Press the remote control arm disarm siren sound open or S
22. to delete the first group number 13812345678 then press OK to save the settings Press ESC can back to the menu The other groups number by such analogy 3 4 Pre record Voice Message Alarm panel will play a pre recorded voice message after the alarm call when a pre set phone number upon alarm To record customized message Press menu to enter main menu Press 4 to enter message recording and then press 1 to start recording speak your message to the panel for recording System will record 10 seconds and then automatically exit or press ESC to end recording in advance when in the recording status 3 5 Add remote control Press menu to enter main menu Press 2 to enter Add accessories Press 1 to enter add remote control the menu would be indicate that type the Number 00 99 if add Ist remote control please input Ol add 22th remote control please input 22 then press OK Jto save the settings Then press any key of the remote control to send a signal to the alarm panel voice prompt Set successful and LCD display has been saved means successful If beep only once means this remote control has been configured before Alarm panel can configure up to 150 remote control of different addressing 3 6 Delete the remote control Press menu to enter main menu Press 2 to enter Add accessories Press 3 to enter Del remote control then type the Number 00 99 if delete 1st remote control please input 01 dele
23. y Query the alarm panel arm disarm records Syntax Menu gt 7 gt 2 gt Lup key and down key query Query the alarm panel alarm records Syntax Menu gt 7 gt 1 gt Lup key and down key query Used to query the alarm panel arm disarm records system will keep recently article72 pieces arm disarm records Press menu then press 7 then press 2 press up key to check last one press down key to check next one Example Article 001 record Date 05 02 Time 00 30 The system state 01 remote control disarm Means on 0 30 a m May 2nd 01 remote control disarm Used to query the alarm panel alarm records system will keep recently article 102 pieces alarm records Press menu then press 7 then press 1 press up key to check last one press down key to check next one Example Article 001 record Alarm date 05 03 Alarm time 21 30 Alarm defence zone 01 Defence zone type NORMAL Means on 7 30 p m May 3rd happened 1 defence zone alarm 1 defence zone type is NORMAL defense zone 5 Remote Control of Panel 5 1 After receiving the Panel Alert After Panel alerts it will automatically dial the preset telephone number for three times until connected When the user picks up the phone a piece of pre recorded voice message will be played back immediately and let the receiver noted about the event Upon receiving the call it can also control the alarm panel remotely via the phone accor

tw

Contents

Download Pdf Manuals

Related Search

Related Contents