USER GUIDE - FLIR Systems
Contents
1. FLIR ONE see Second Generation For Android FLIR ONE QUICK START G STEP 1 Charge the FLIR ONE with the included USB power cable The LED next to the USB connection blinks on and off while the FLIR ONE is charging and stays on continuously when it is fully charged Once the FLIR ONE is charged attach it to the phone Android Spacer For users that do not have a case on their Android a provided spacer can be attached to the FLIR ONE to create a snug fit and finish See page 9 for more information STEP2 Download and install the FLIR ONE app which is available on Google Play When you start the FLIR ONE app a short tutorial will be displayed to help you get started with the FLIR ONE ANDROID APP ON STEP 3 Press the power button on the side of the FLIR ONE to turn it on Initially the indicator light will turn orange and then it will flash green when the device is ready USER GUIDE 2 STEP 4 Once an image is displayed tap the color palette icon in the lower APP OVERVIEW Batter left to change how the image is displayed Select one of the displayed tC Calibration color or grayscale palettes The camera is in photo mode as indicated just below the image Tap the camera icon to capture an image At the bottom of the display select the Mode button a circle with Mode to bring up a screen that let s you select another mode Video Pano or Time Lapse These modes are descri2. Meter is enabled and the Automatic Calibration is disabled the Calibration icon in the upper right will turn red Tap the icon to cause the camera to do a manual calibration FLIR LIBRARY SCREEN Edit Image J o e e lt 30f46 Image Info Share Image USER GUIDE 6 AUTOMATIC CALIBRATION The camera has a mechanical shutter inside that periodically activates and allows the thermal camera to do a calibration or image refresh When the shutter activates the image will freeze for a brief period The purpose of the shutter is to allow the camera to provide an improved image When the camera first turns on and periodically thereafter the app will perform an automatic calibration to provide an optimal image When the Spot Meter is turned on the automatic tuning will occur more often It is also possible to manually activate the shutter by tapping the Calibration icon in the upper right on the main screen Calibration can be switched to manual by turning off Automatic Calibration in the Settings Menu CONTROL PANEL CONTROL PANEL Select the gear icon in the upper left to open the Control Panel The Control Panel allows the user to turn on off the Light access the Self timer settings enable disable Close Up mode or access the Settings menu Tap the left arrow in the upper left to close the panel LIGHT Multi Spectral Imaging MSX is a patented technology which makes use of the visible camera in the FLIR ONE to maxim
3. The images are saved to the FLIR Library To view the most recent saved image tap on the thumbnail in the lower right It is not necessary to have the FLIR ONE camera attached to the phone to view saved images MODE SCREEN TAKING VIDEO At the bottom of the screen select the Mode button and then select Video mode Then tap on the video icon to begin video capture Tap on the video icon again to stop the video capture and save the video in the FLIR Library To view the captured video tap the thumbnail image in the lower right of the screen to access the FLIR Library PANORAMA MODE At the bottom of the screen select the Mode button and then select Panorama mode Tap on the panorama icon to begin the image capture The camera will detect if you move left or right and will capture images until you move 90 degrees or hit the stop icon Panorama Time lapse PANDRAMA MODE USER GUIDE 5 TIME LAPSE VIDEO At the bottom of the screen select the Mode button and then select Time Lapse mode Then tap on the video icon to display the Time Lapse options Adjust the options as needed and then tap the video icon to begin video capture Tap on the video icon again to stop the video capture FLIR LIBRARY A captured image or video may be viewed and edited by selecting the thumbnail image in the lower right corner of the screen To view other images or videos swipe left or right to access the previous or next image video or tap the Librar
4. life This requirement applies in the European Union Do not dispose of these products as unsorted municipal waste USER GUIDE 12
5. age offset from the thermal image and the image on bottom shows the visible image aligned with thermal SETTINGS MENU The Settings Menu allows the user to configure additional features on the FLIR ONE as described below EMISSIVITY When the Spot Meter is enabled the temperature displayed is affected by many factors including a property of the target material known as Emissivity This property is a relative rating of how well a material emits or radiates thermal energy Some materials are more emissive than others glossy or reflective materials like metals tend to be poor emitters For most materials the default matte setting is a fair approximation ALIGNED TEMPERATURE UNIT Use this setting to change the temperature unit of measure between the Fahrenheit and Celsius scale SAVE LOCATION If a mobile phone signal is available the location will be added to captured images This makes it possible to see images on a map Save to Photos Turn this on to save a copy of your images and videos in the phone s photo gallery Images will always be stored in the FLIR ONE camera regardless of this setting Items already captured will not be copied USER GUIDE 8 ANDROID SPACER Included with your FLIR ONE are two spacer attachments that can be used to create a snug fit and finish for users who do not have a case on their phone To assemble remove the protective film revealing the adhesive on the underside of th
6. bed in a later section of the manual The image that displays in the app is a combination of a thermal image and a daylight image through a unique process called MSX The FLIR ONE thermal camera can produce an image even in total darkness When visible light is available the FLIR ONE daylight camera Color Palette Camera Button is used to enhance the detail of the FLIR ONE thermal camera Mode Button FLIR Library PALETTE SCREEN For close up scenes it is possible to optimize the way the daylight and thermal images are blended In the Control Panel you can enable disable this mode by clicking on the Close Up Mode button represented by a flower When Close Up Mode is enabled you can control the image optimization the alignment of the thermal and visible image by adjusting the Optimization slider Optimizing the image is described in more detail on page 7 Refer to the following sections in this guide for additional information on using the FLIR ONE More detailed information is also available in the Help amp Support feature within the FLIR ONE app The FLIR ONE Reference Manual is available from the FLIR web site http www flir com flirone WARNING The FLIR ONE is not waterproof Use caution if the FLIR ONE is used to observe very hot objects like fire or molten metal USER GUIDE 3 FLIR ONE USER GUIDE The FLIR ONE allows you to see the world in a whole new way with a unique blend of thermal and visible ima
7. e device The battery can be charged and discharged hundreds of times but it will eventually wear out Use and standby times are estimates only Actual times are affected by for example device settings features being used battery condition and temperature If the battery has not been used for a long time to begin charging you may need to connect the charger then disconnect and reconnect it If the battery is completely discharged it may take several minutes before the charging indicator is displayed When your charger is not in use unplug it from the electrical plug and the device Do not leave a fully charged battery connected to a charger as overcharging may shorten the battery s lifetime If left unused a fully charged battery will lose its charge over time Always keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Do not dispose of batteries in a fire as they may explode Dispose of batteries according to local regulations Recycle when possible Do not dispose as household waste Use the charger for its intended purpose only Improper use or use of unapproved chargers may present a risk of fire explosion or other hazard and may invalidate any approval or warranty If you believe the charger is damaged take it to a service centre for inspection before continuing to use it Never use a damaged charg
8. e micro USB connection will stay lit continuously if the device is fully charged TEMPERATURE READINGS NOT ACCURATE The temperature indicated by the FLIR ONE is always a calculated estimate and never exact The indicated temperature is affected by many factors especially the emissivity of the object being observed and the distance to the object The temperature may be influenced by the time of day by weather conditions or by other hot or cold objects in the vicinity that may be reflecting off the intended object AUTOMATIC CALIBRATION If Automatic Calibration is disabled it may be necessary to manually perform a calibration operation on the FLIR ONE This allows the thermal imager to present an optimized image and a more accurate temperature calculation see Automatic Calibration on page 7 for more information USER GUIDE 11 LEGAL DISCLAIMER FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause ha
9. e spacer Line up the straight edge of the spacer with the straight edge of your FLIR ONE Once lined up properly apply light pressure to ensure a complete seal Note Once the spaced is attached your FLIR ONE will no longer fit inside the supplied bumper SPACER OPTIONS Tie ALL OTHER ANDROID MODELS SAMSUNG GALAXY 55 There are two different spacer options depending on the phone model The spacer with the U shaped divot in the top should only be used for the Samsung Galaxy s5 All other Android models should use the Spacer with the smooth top USERGUIDE 9 HELP Much more information about the FLIR ONE is described in the Help feature within the FLIR ONE app It is also possible to access the Tutorials from the Help menu ABOUT FLIR ONE The About FLIR ONE menu option provides information about the FLIR ONE camera the FLIR ONE app our company FLIR Systems Inc and additional legal licensing and regulatory information USER GUIDE 10 TROUBLESHOOTING FLIR ONE NOT DETECTED If the FLIR ONE app is not able to detect the FLIR ONE camera make sure the iPhone is properly attached to the FLIR ONE and fully engaged Make sure the FLIR ONE is turned on with the power switch When the FLIR ONE is turned on the power indicator should be flashing green Make sure the FLIR ONE is adequately charged up when the device is plugged into a power source the charge indicator on the side of the device near th
10. er Only use the charger indoors Take care of your device Handle your device charger and accessories with care The following suggestions help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that corrode electronic circuits If your device gets wet allow the device to dry Do not use or store the device in dusty or dirty areas Moving parts and electronic components can be damaged Do not store the device in cold temperatures When the device warms to its normal temperature moisture can form inside the device and damage electronic circuits Do not attempt to open the device Unauthorized modifications may damage the device and violate regulations governing radio devices Do not drop knock or shake the device Rough handling can break internal circuit boards and mechanics Use a soft clean dry cloth to clean the surface of the device Recycle Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the recycling of materials Check how to recycle your FLIR ONE products at www flir com flirone The crossed out wheeled bin symbol on your product battery literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working
11. ging This user guide provides brief information on how to use the FLIR ONE Additional information is available directly from the FLIR ONE app in the Settings menu s4 Charge Indicator LED Micro USB power Thermal Camera Visible Camera Phone Connect or Micro USB 7 i Off On Switch and Power Indicator O CHARGING THE FLIR ONE Plug the Micro USB end of the power cable into the FLIR ONE and plug the other end into a USB power source The Power Status indicator will blink while the device is charging The FLIR ONE requires less than one hour for a full charge depending on the power source When the device is fully charged the Power Status indicator will be on continuously USER GUIDE 4 4 FLIR ONE APP The latest version of the FLIR ONE app is available on the Google Play Store Download and install the app then start it If the FLIR ONE is turned off the app will prompt you to attach your FLIR ONE camera and turn it on O APP OVERVIEW At the top of the screen there is a black bar with icons for the Control Panel Spot Meter Battery Level and Calibration Below that is the live image and at the bottom of the screen is another black bar with icons for the Color Palette Mode Photo Video Panorama or Time Lapse Camera and FLIR Library TAKING PICTURES At the bottom of the screen select the Mode button and then select Photo mode Tap the camera button at the bottom of the screen to save a snapshot
12. ize detail and image Sharpness This feature requires some amount of visible light so in dark environments turn on the light to enhance the image detail This feature makes use of the light that is built into the phone TIMER The Timer option allows the user to set a time delay before an image is saved When the Timer icon is selected the Timer control panel toggles between Os off 3s and 10s The user can set the time delay to 3 or 10 seconds or turn off the time delay option When the Timer delay is enabled the user saves an image by tapping the Camera icon at the bottom of the screen and then a countdown timer displays on the image CLOSE UP MODE FLIR ONE uses two camera sensors a thermal camera and a visible light camera and an exclusive image blending process called MSX to create a detailed image By default the camera should be at least one meter about an arm s length away from the subject in the image for the blending to work optimally For closer subjects it is possible to adjust the alignment of the thermal and visible with the slider at the bottom of the image USER GUIDE 7 OPTIMIZATION SLIDER CONTROL SPEEA TON ANEN When Close Up mode is enabled a slider bar appears at the bottom of the image For close objects move the slider to the left to align the visible image with the thermal image Observe the right edge of the coffee cup to the right The image on top shows the lines of the visible OFFSET im
13. rmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment IC Statement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada VCCI CORBIS JIZABDAHRMHRECS CORB RERRCER FSACEEBHELTUETHM COMBMPIVAPCTLEV a R ER H LTI B NSE HERE tS EZ Zerot RUIR RSPAS CHES TEL URW RUE LT F VCCI B Product and safety information Battery and charger information This device has an internal non removable rechargeable battery Do not attempt to remove the battery from the device as you may damage th
14. y icon to go to Library view Images and videos may be shared through text messaging or email and may be edited by changing the color palette or turning the spot meter on off While an image is being viewed it is possible to swipe Up or down to reveal the visible image that is used for MSX blending CHANGING COLOR PALETTES On the display the live image tap the color palette icon in the lower left to change how the image is displayed Select one of the displayed color palettes The color palettes are described in more detail in the Help and Support feature of the app see Settings Menu The app allows a choice from nine different palettes some palettes are colors and some are grayscale or a combination of grayscale and color To change the color palette of a saved image select the Edit Image icon represented by a pencil on the Image View screen SPOT METER When the Spot Meter is enabled a disabled Spot Meter will have a Slash through the icon the FLIR ONE will display a temperature estimate in degrees C or F on the image The accuracy of the Spot Meter depends on a great many factors including the distance from the object the ambient temperature and the emissivity of the material being observed Users are encouraged to learn more about the science of Thermography from www infraredtraining com To switch between Fahrenheit to Celsius use the Settings option in the Control Panel described in the next page Note When the Spot
Download Pdf Manuals
Related Search