FARGO C50 Card Printer User Guide
Contents
1. 2000m Use only at altitudes not more than 2000m above sea level Go RoHS Environmental Protection Use Period is based on the product being used in an office environment November 2014 PLT 01277 Version 1 2 Introduction and Specifications Page 1 8 14 Technical Specifications Term Function Print Method Dye Sublimation Resin Thermal Transfer Print resolution 300 dpi 11 8 dots mm continuous tone Colors Up to 16 7 million colors 256 shades per pixel Full color with resin black and overlay panel YMCKO 250 prints Resin black standard and premium 1000 prints Res2. PLT 01277 Version 1 2 November 2014 Page 1 7 Introduction and Specifications HID 1 3 4 Safety Messages China 5 aS J gt ESD
3. ms ks DES LBS o TAR ARREARS T gt PT IN gt ee gt UR RAR gt TERRA ENZO ZAM WB PIETE Bhi gt
4. For Overlay Only For Print Only No Overlay Security Options Visual Security Solutions Upper Left VeriMark C HoloMark This field presents options based on the orientation of the card in the template Landscape designs offer e A Upper Left e B Upper Right e C Lower Left e D Lower Right Portrait designs offer e E Upper Left e F Upper Right e G Lower Left e H Lower Right PLT 01277 Version 1 2 November 2014 Page 3 17 Printer Preferences 3 7 K Panel Resin Tab The K Panel Resin tab contains the controls for indicating the position where the resin black K panel of a full color ribbon is printed If a ribbon without a resin black panel is installed in the printer these options are grayed out and unavailable The orientation of the card display area is determined by the orientation specified on the Card tab CR 80 Card Size Front Back 1 200 A Em at oo x eoo aly inches C mm 0 0 Defined Area X Add Direction Card Travels through Printer Delete Print All Black with K Panel Full Card Defined Areals Undefined Areals Print YME under K Print K Only Group or Field Description This area includes three options Print All Black With Full Card K Panel Defined Area s Undefined Area s Select this option to print the resin black K panel for all black found within all Full Card areas of the image November 2014 PLT 01
5. FARGO C50 Card Printer User Guide PLT 01277 Version 1 2 November 2014 hidglobal com Copyright 2013 2014 HID Global Corporation ASSA ABLOY AB All rights reserved This document may not be reproduced disseminated or republished in any form without the prior written permission of HID Global Corporation Trademarks HID GLOBAL HID the HID logo and FARGO are the trademarks or registered trademarks of HID Global Corporation or its licensors in the U S and other countries Contacts For additional offices around the world see www hidglobal com corporate offices Americas and Corporate Europe Middle East and Africa EMEA 611 Center Ridge Drive Haverhill Business Park Phoenix Road Austin TX 78753 Haverhill Suffolk CB9 7AE USA England Phone 866 607 7339 Phone 44 0 1440 711 822 Fax 949 732 2120 Fax 44 0 1440 714 840 Asia Pacific Brazil Condom nio Business Center 19 F 625 King s Road Av Ermano Marchetti 1435 North Point Island East Galp o A2 CEP 05038 001 Hong Kong Lapa S o Paulo SP Phone 852 3160 9833 Brazil Fax 852 3160 4809 Phone 55 11 5514 7100 Fax 55 11 5514 7109 HID Global Customer Support hidglobal com customer service PLT 01277 Version 1 2 November 2014 Contents Chapter 1 Introduction and Specifications 1 1 11 Using this Documeoent iie Re LEISURE aue ed er es Rae d idea etie 1 1 12 Specifications 1 2 1 2 1
6. 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case this interference is required to be corrected at the users expense IMPORTANT Changes or modifications to an intentional or unintentional radiator not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Canada This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canad
7. Image Color tab window Click Cancel to negate all changes and return to the Image Color tab window Click Default to clear changes back to the default settings for this window Advanced Image Color emi Shatpnese R ji Contrast L 0 I OL OPEN OI ET Advanced Image Color pe OEL Balance Yellow Balance Magerta Balance EEE Cyan Balance S Ec E EE November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 10 3 4 Image Calibrate Tab The Image Calibrate tab has the adjustments to the image position on the card Magnetic Encoding Overlay Print Area K Panel Resi Card Device Options Image Color r Image Position HIM HULL LRD belts Horizontal Y e Direction Card Travels through Printer Group or Field Description Image Position Adjust the image position values by clicking the arrow buttons next to the Vertical and Horizontal fields These values ensure that the cards always remain in the same position as they travel through the printer regardless of image orientation PLT 01277 Version 1 2 November 2014 Page 3 11 Printer Preferences Use the Vertical adjustment to move the image toward the top or bottom of the card A positive number moves the image toward the top Vertical A negative number moves the image toward the bottom The maximum value for the Vertical adjustments is 10
8. Oma Mag Stripe Area Omi Signature Area 4 Up to five areas can be defined PLT 01277 Version 1 2 November 2014 Page 3 15 Printer Preferences 3 6 2 Defining additional areas 1 After the first area is defined select 2 in the Defined Areas spin box 2 The second area begins again at the O 0 location 3 Click and drag to enlarge the area and move it to the preferred location on the card 4 This procedure can be done up to the five area limit Cad Device Options image Color image Calibrate Cad Device Options image Color image Calibrate Magnetic Encoding Overlay Prrt Ares K Panel Resin Pinter Info Magnetic Encoding Oveday P nt Area K Panel Resin Panter info CR 80 Card Size Front C Back CR 80 Card Size Front Back 2m zii zo JE po IX po 2h inches 3 6 3 Deleting a Defined Area To delete one or more defined areas 1 Select the area to be deleted 2 Click Delete November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 16 3 6 4 Visual Security Solutions Card Device Options image Color Image Calibrate Magnetic Encoding Overlay Print Area KPanel Resin Printer Info CR 80 Card Size Front C Back un Hum x y amma EBEEEEEEEEEE peed P OO 29 y HH HH 44 41 inches EEE ia 0 0 el Defined Area D Delete Direction Card Travels through Printer Overlay Print Area Undefined Areals y fe For Print and Overlay
9. Open the printer driver settings 1 From the computer s Start menu select Devices and Printers 2 Right click the Card Printer entry under Printers and Faxes 3 Select Printing Preferences 4 Select the Card tab and click Test Print An image is sent to the printer Test Print Select About to display the copyright information the driver s version number and date code November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 4 3 2 Device Options Tab The Device Options tab has the ribbon options as well as image printing position on the card adin Oueday P nt Area KPanelResin Printer Info Device Options Image Color Image Calibrate Supplies Automatically detect the installed Ribbon for every print job Ribbon Type vwcko Full Color Resin Black Overlay y Dual Sided Print Both Sides Ps plit I Set of Ribbon Panels Print Back Image on Front of Card Print Back Side Only Options IV Rotate Front 180 Degrees F Rotate Back 180 Degrees Disable Printing Write Only Invert F panel Image coa Group or Field Description Supplies Automatically detect the installed ribbon for every print job The printer driver automatically detects the installed ribbon To manually select the ribbon type clear the checkbox option and select the ribbon from the Ribbon Type drop down menu PLT 01277 Version 1 2 November 2014 Pr
10. Settings tab in ToolBox PLT 01277 Version 1 2 November 2014 Chapter Printer Preferences This section provides an overview of the Printing Preferences tabs There are some common buttons displayed on all screens Button Description OK Closes the dialog box and saves the driver configuration changes since the dialog box opened Cancel Closes the dialog box and discards configuration changes made since the dialog box opened Help Displays Help topics specific to the active tab Default Returns all settings to the default selection November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 2 3 1 Card Tab The Card tab has the options for the card type and positions as well as access to diagnostics and calibrations Note Never run cards with a contaminated dull or uneven surface through the printer Printing onto such cards will ultimately lead to poor print quality Always store the card stock in its original packaging or in a clean dust free container Do not print onto cards that have been damaged or soiled Magnetic Encoding Overlay Print Area KPanelResin Printer info cor Device Options Image Color Image Calibrate Card Size inches C mm Print Width 2 110 Print Lenath 3 366 Card Thickness mil 30 r Orientation Portrait Landscape Copies EM Diagnostics Test Print ToolBox About ame PLT 01277 Versi
11. card PLT 01277 Version 1 2 November 2014 Page 3 7 Printer Preferences HID 3 3 Image Color Tab The Image Color tab has the options for adjusting the color printed onto the card Magnetic Encoding Overlay Print Area K Panel Resin Printer Info Card Device Options Image Calibrate Image Quality Color Matching System Color Management Resin Dither Optimized for Graphics Dye Sub Intensity MMC Default Advanced Settings coa November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 8 Group or Field Description Image Quality Select one of the following options from the drop down menu None If interested in print speed rather than print color If color correcting an image that has been previously printed If using third party color matching software Color Matching System Color Management Allows the printer driver to make color corrections through a complex color matching algorithm Note This option shifts colors so the image more closely matches how they appear on screen Algebraic to use the Algebraic color matching algorithm Resin Dither is available when the resin ribbon is installed This process produces different shades of gray by varying the patterns of black and white dots There are no gray dots at all Resin Dither There are two selections available Optimized for Graphics Optimized for Photos Heat Adjusting t
12. preferences gt Card gt Test Print 4 Determine whether adequate disk space is available Note A large volume of temporary files on the computer can cause communications errors November 2014 PLT 01277 Version 1 2 Troubleshooting Page 5 2 5 1 1 Error and Status Messages Error Message Description Troubleshooting A card is not successfully Card Eject Error ejected from the printer No cards are loaded in the input hopper Card Hopper Empty Press the Power button repeatedly to move the card toward the output hopper Place cards in the input hopper Multiple cards are located Card Jam in the printer Press the Power button repeatedly to move all cards toward the output hopper The printer is unable to feed a card from the input hopper Card Not Found The printer cannot print Cover Open when the cover is open The printer does not print General Error for an unspecified reason The printhead does not move up down successfully Headlift Error Ensure that cards are available and loaded correctly Press the Pause Resume button To cancel the print click Cancel Print Close the cover 1 Power the printer off by pressing the Power button twice 2 Open the cover and remove the ribbon cartridge Check for a jammed or broken ribbon If the ribbon is not jammed or broken reinstall the cartridge f the ribbon is jammed or broken replace it with a compatible cartri
13. print ribbon is used to 1 Install a qualified ribbon into the ribbon cartridge and press the Pause Resume button 2 Verify the ribbon is not broken or upside down in the Ribbon Out its maximum capacity cartridge and press the Pause Resume button 3 Verify the Ribbon Type on the Device Options tab is set correctly Ribbon RFID The printer is incompatible Install a ribbon cartridge that is compatible with the printer Error with the ribbon installed Press the Pause Resume button Ribbon Sensor Error The ribbon temperature sensor is out of range Calibrate the ribbon sensor 1 Click on Cancel Print 2 Open the cover and remove the ribbon cartridge 3 Close the cover 4 Select Card gt ToolBox gt Calibrate Ribbon gt Calibrate November 2014 PLT 01277 Version 1 2 Troubleshooting Page 5 4 Error Message Description Troubleshooting The Supply information is unavailable at this time Wrong Ribbon Installed Unable to Feed Card The printer driver does not automatically detect the ribbon type The printer is compatible with selected types of ribbons An incompatible ribbon is installed OR The Ribbon Type on the Device Options tab is set incorrectly The printer is unable to feed a card from the input hopper 1 Click OK 2 Click Device Options 3 Clear the Automatically detect the installed Ribbon for every print job check box 4 Select the Ribbon Type drop
14. r sultats peuvent tre des l sions corporelles ou la Danger mort Pour viter des l sions corporelles ou la mort Rapportez vous aux avis suivants de s curit avant de proc der une op ration e Retirez toujours le c ble d alimentation avant d effectuer des proc dures de r paration sauf sp cification contraire Assurez vous qu uniquement des personnes qualifi es r alisent des proc dures Ce dispositif est sensible l lectricit statique Il peut souffrir des dommages s il est expos des d charges lectrostatiques Pour viter des dommages ESD Rapportez vous aux messages suivants avant de proc der une op ration Suivez toutes les proc dures de D charges Electrostatiques ESD en vigueur durant le maniement des c bles dans ou proximit des Ensembles de Cartes de Circuit Imprim et T te d Impression Portez toujours un dispositif de mise la terre personnelle appropri e e Retirez toujours le ruban et les Cartes de l imprimante avant d effectuer toute r paration sauf sp cification contraire Retirez tous bijoux et lavez soigneusement vos mains avant de travailler l Imprimante Attention Ce symbole est un avis de p ril lectrique passible de r sulter en l sion corporelle ou mort November 2014 PLT 01277 Version 1 2 HID Introduction and Specifications Page 1 6 1 3 3 Safety Messages Taiwan
15. 0 Pixels 10 Pixels O O3inches 8mm Use the Horizontal adjustment to move the image toward the left or right side of the card A positive number moves the image toward the left A negative number moves the image toward the right The maximum value for the Horizontal adjustments is 100 Pixels 10 Pixels O O3inches 8mm Horizontal The card Illustration rotates according to the selection of Portrait Landscape Card tab or Rotate Front 180 Degrees Device Options tab The outline around the illustration remains constant in the landscape orientation Portrait Selected Landscape Selected on Card Tab on Card Tab Portrait amp Landscape amp Rotate 180 Rotate 180 Selected Selected 3 5 Magnetic Encoding Tab Reserved although currently displays as a tab November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 12 3 6 Overlay Print Area Tab The Overlay Print Area tab contains the options to control and customize where the overlay O panel and or the print area appear on the card By default this option is set to print and overlay the entire card The orientation of the card display area is determined by the orientation specified on the Card tab Image Calibrate Aes KPanel Resin Printer Info CR 80 Card Size Front CO Back X Defined Area Direction Card Travels through Printer r Overlay Print Area Full Card For
16. 0 frm c Click OK to send the file to the printer s 4 Restart the printer if it does not automatically restart November 2014 PLT 01277 Version 1 2 Firmware Updates Page 7 2 This page intentionally left blank PLT 01277 Version 1 2 November 2014 Revision History Date Description Version Updated liability and trademark acknowledgments and copyright November 2014 statements Updated Japan cert Updated to current format 1 2 Updated global customer support information July 2013 Ribbon print count change 11 April 2013 First Release 1 0 PLT 01277 Version 1 2 November 2014 hidglobal com
17. 277 Version 1 2 Printer Preferences Page 3 18 Group or Field Description Defined Area s Select this option to overlay and or print only in the selected and defined area s Undefined Select this option to overlay and or print in the space outside the selected and Area s defined area Select Print YMC under K to print all black in the designated areas with the yellow Y magenta M and cyan C ribbon panels directly beneath the resin black K panel This combination provides a gradual transition between the resin black text or bar code Print YMC Under K Select Print K Only to print using the resin black K panel onto a white Print K Only background to maximize the sharpness of printed text and bar codes PLT 01277 Version 1 2 November 2014 Page 3 19 Printer Preferences 3 8 Printer Info Tab The Printer Info tab contains the supply information about the medias installed on the printer e Ribbon Type e Reorder Number e Card Count e Printer Serial e Firmware Version Type YMCKO Full Color Resin Black Overlay Reorder 99906 Lot H Unt OWN Empty Note Graphic for information ONLY DO NOT use to order supplies November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 20 PLT 01277 Version 1 2 November 2014 Chapter ToolBox This section provides an overview of the ToolBox tabs There are some common buttons displaye
18. 277 Version 1 2 Introduction and Specifications Page 1 4 1 3 Safety Messages 1 3 1 Safety Messages United States Symbol Critical Instructions for Safety Purposes Failure to follow these guidelines results in personal injury or death To prevent personal injury or death Reference the following safety messages before performing an operation Always remove the power cord prior to performing repair procedures unless otherwise specified Ensure only qualified personnel perform these procedures Danger This device is electro statically sensitive The device may be damaged if exposed to static electricity discharges To prevent damage Reference the following safety messages before performing an operation Observe all established Electrostatic Discharge ESD procedures while handling cables in or near the Circuit Board and Printhead Assemblies Always wear an appropriate personal grounding device Always remove the Ribbon and Cards from the Printer before making any repairs unless otherwise specified Remove jewelry and thoroughly clean hands before working on the Printer ESD Caution This symbol warns of an electrical hazard that could result in personal injury or death PLT 01277 Version 1 2 November 2014 Introduction and Specifications 1 3 2 Safety Messages French Symbole Instructions critiques visant la S curit Si ces directives ne sont pas suivies les
19. 4 1 Group or Field Description Apply Restore Defaults Settings and Troubleshooting This option applies the changed values Change the current value by clicking the field to activate the control enter the new value and click Apply or OK to apply the change The change to the firmware value is confirmed by one beep from the printer This option restores all factory default values To restore the factory default values click Restore Defaults and click Yes on the Settings confirmation window Setting Description Troubleshooting Head Resistance Print Left of Form Printhead resistance is set to an incorrect value Adjusts the vertical position of the printed image on the card so it appears centered Locate the actual resistance value on the printhead for example R XXX Reserved Image Darkness Print Top of Form Ribbon Print Tension Adjusts the overall darkness of the printed image by increasing or decreasing the amount of heat used by the printhead when printing Adjusts the length wise or horizontal position of the printed image on the card so it appears to be centered Adjusts the tension drag on the ribbon during printing Lighten the printed image by clicking or enter the exact negative value decreasing the printhead heat Darken the image by clicking or entering a positive value increasing the amount of printhead heat IMPORTANT If this setting is set too hig
20. Input Hopper Card 50 Cards 030 in 762 mm Manual Feed Capacity Output Hopper Card ZO cards 030 in 762 mm Capacity Card Cleaning Each ribbon cartridge includes a new card cleaning roller Printer Memory 32MB RAM Operatiha Systems Windows XP Vista 32 bit amp 64 bit Server 2003 amp 2008 Windows 7 32 amp peraung Sy 64 bit Windows 7 32 amp 64 bit Linux MAC OS X 10 5 10 6 10 7 10 8 Interface USB 2 0 PLT 01277 Version 1 2 November 2014 Page 1 9 Introduction and Specifications Term Function Operating Temperature 65 F to 80 F 18 C to 27 C Humidity 20 80 non condensing Dimensions 8 8 in H x 13 7 in W x 7 9 in D 224mm H x 348mm W x 201mm D Weight 7 5 lbs 3 4 Kg Safety UL 60950 1 CSA C22 2 60950 1 and CE EMC FCC Class A CRC Agency Listings 1374 CE EN 55022 Class A EN 55024 CCC BSMI KCC Supply Voltage 100 240 VAC 1 6 A Supply Frequency 50 Hz 60 Hz Printer Two years Warranty Printhead a years unlimited pass with UltraCard Options Printer Cleaning Kit Software FARGO Workbench Diagnosis Utility Display Status indicated by button color red or blue flashing always on or always off November 2014 PLT 01277 Version 1 2 Introduction and Specifications Page 1 10 15 Functional Specifications This card printer utilizes two different yet closely related printing technologies to achieve i
21. Print and Overlay For Overlay Only C For Print Only No Overlay M Security Options Visual Security Solutions No Yisual Security T Veriark HoloMar OK Cancel Apply Help PLT 01277 Version 1 2 November 2014 Page 3 13 Printer Preferences Group or Field Description To define an overlay or print area select that option in the overlay print field Full Card Select this option to overlay and or print the entire card Defined Area s Select this option to overlay and or print only in the selected and defined area s Undefined Area s Select this option to overlay and or print in the space outside the selected and defined area Overlay Print Areas Omit Smart Chip Area Select this option to overlay and or print only in the space outside the standard location of a smart chip Omit Mag Strip Area Select this option to overlay and or print only in the space outside the standard location of an ISO standard magnetic stripe Omit Signature Area Select this option to overlay and or print only in the space outside the standard location of a signature panel See Section 3 6 1 Defining an Overlay or Print Area For Print and Overlay This option applies the defined area to both the print and overlay processes The defined area applies only to the overlay process The entire card prints and For Overlay Only only the overlay is affected For Print Only No Overla
22. Regulatory Compliance i 1 2 12101 Agency Listings o o codes data tese ame eode DR R ls e RAT nan 1 2 1 212 United States tats 2 Na OT Ob ede urine craindre 1 3 AMC So gt PR Pam ar a a a ee a ec 1 3 1 2 1 4 TAIWAN ELI aa aod wheel BAR Ae Gaia Dok Ged Bae Wa Ee A Rae tae 1 3 1 2 1 5 Japan ea O A ae a An Re een 1 3 1 21 62 ORO a ee tee De er ee te De ee 1 3 1 3 Safety Messages eso achte dd are Ser the ey an lois 1 4 1 3 1 Safety Messages United States 1 4 1 3 2 Safety Messages French o 1 5 1 3 3 Safety Messages TaiwaN i 1 6 1 3 4 Safety Messages China sce wo Oey i ea eee teen eet eens 1 7 14 Technical Specifications i 1 8 15 Functional Specifications i 1 10 16 Printer Components Print Ribbons i 1 10 1 6 1 Ribbon Types and Print Counts 1 10 17 Printer Components Blank Cards 0 ce eer 1 11 18 Setup and Installation Procedures 1 11 Chapter 2 Hardware User Interface ann nn nn nn nn nn nn nn nn nn nun nn 2 1 2 1 Card Printer Buttons 12 22 Opec ae ee dia teh Reb Bde Baal 2 1 2 1 1 Using the Power Button i 2 1 2 1 2 Using the Pause Resume Button 2 as 2 1 2 1 3 Card Printer Beeps x ves eed exte x end de Bae eh Se tien or 2 2 Chapter 3 Printer Preferences 0 occcoccccoccn nn un nn nn nn nn nn nn nn nn nn nen 3 1 3 1 Card Ta 3 2 52 Device Options Ta 3 4 3 2 1 Wite ONY so a a a a
23. a applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement Taiwan JESEST UI gt Zu RSE ela a SE 2 Japan CORE IAR OMRE EZ FU TUET ABIERTAS I3 58 AC 14019 STT AE St ER amp EF LE RFID D 9 IBSASRSTT ZOKO EAT SHIR LMI gt cli RARR REL SASRANMHOET Korea 0 Ile 88 AS AAD HIDDEN HOA SE ASHE Ol SS FLO ZE Het Ir 219 A SAA AS o As sog Buc November 2014 PLT 01
24. any type of maintenance procedure unless otherwise directed AVERTISSEMENT D branchez le cordon d alimentation de l imprimante chaque fois d effectuer tout type de proc dure de maintenance sauf indication contraire 4 Re install the printing supplies 5 Close the cover 6 2 2 Cleaning Outside the Printer The printer has a durable casing that should retain its luster and appearance for many years Clean it only with a cleaning pad from the printer cleaning kit CAUTION Do not use cleaning solvents of any kind or spray the printer with a cleaner ATTENTION Ne pas utiliser de solvants de nettoyage de toute nature ou vaporiser de l imprimante avec un nettoyant 6 2 3 Cleaning the Printhead To maintain consistent print quality Clean the printhead every time the print ribbon is changed Perform this procedure approximately every 3000 prints CAUTION Never use a sharp tool or abrasive object to clean the printhead Watches rings bracelets and other jewelry can damage the printhead ATTENTION Ne jamais utiliser un outil pointu ou un objet abrasif pour nettoyer la t te d impression Montres bagues bracelets et autres bijoux peuvent endommager la t te d impression PLT 01277 Version 1 2 November 2014 Page 6 3 Cleaning Remove watches rings bracelets and other jewelry Unplug the power cord from the electrical outlet Open the cover and remove the ribbon cartridge BUM Use an alcohol swab s
25. d Head Queue R Offset Reserved eserved Head Card R Thickness Offset RERORVED de 10 Mil Card Queue Offset Reserved Reserved PLT 01277 Version 1 2 November 2014 Chapter Troubleshooting The purpose of this section is to provide the user with specific procedures for recovering the printer from an error condition If problems are encountered beyond the situations described below contact support hidglobal com 5 1 Communications Errors Symptom s Incorrect output communications error on PC stalling no response from Printer or no job printed 1 Confirm that the system meets the minimum requirements BM PC or compatible e Windows 7 32 bit amp 64 bit Windows XP 32 bit Windows 2003 R1 and R2 32 bit Windows 2008 R2 32 bit and 64 bit Vista 32 bit and 64 bit Pentium class 500 MHz computer with 256 MB of RAM or higher 500 MB free hard disk space or more USB Port 2 Confirm the correct installation of the printer driver Note This pertains especially if an obsolete driver was recently removed Close the software program Reboot the computer Select Control Panel Devices and Printers Card Printer Right click Card Printer Select Printing Preferences gt Card gt About Check the date and version number of the printer driver 3 Print a test print e200 Th a Select Start gt Devices and Printers gt Card Printer USB b Right click Card Printer USB c Select Printing
26. d Class 2 and rated for 24Vdc 3 3A minimum The Printer manufacturer has been authorized by UL to represent the Card Printer as CSA CSA Certified under CSA Standard C22 2 No 60950 1 07 2 edition File Number E145118 The Card Printer complies with the requirements in Part 15 of the FCC rules for a Class FCC ae A digital device The Card Printer has been tested and complies with EN300 330 1 EN300 330 2 EN301 489 1 EN301 489 3 EN55022 class A EN55024 EN6100 3 2 EN6100 3 3 EN60950 1 CE Note Based on the above testing the Printer manufacturer certifies that the Card Printer complies with the following European Council Directives and has placed the CE mark on the Card Printer LVD 2006 95 EC EMC 2004 108 EC R amp TTE 1999 5 EC ROHS2 2011 65 EC Environmental ENERGY STAR RoHS2 China RoHS Power supply Efficiency level V minimum 1 2 1 1 Agency Listings Emissions and Immunity Standards FCC Part 15 Class A RSS GEN RSS 210 CNS 13438 EN55022 Class A EN55024 EN6100 3 2 EN6100 3 3 EN300 330 1 EN300 330 2 EN301 489 1 EN301 489 3 GB9254 GB 17625 UL IEC 60950 1 2nd edition CSA C22 2 No 60950 1 07 2 edition EN60950 1 Safety Standards 55 57 CNS14336 Additional Agency Listings CCC BSMI KC PLT 01277 Version 1 2 November 2014 Page 1 3 Introduction and Specifications 1 2 1 2 1 2 1 3 1 2 1 4 7 2 1 5 7 2 1 6 United States This device complies with Part
27. d on screens Button Description OK Closes the dialog box and saves the driver configuration changes since the dialog box opened Cancel Closes the dialog box and discards configuration changes made since the dialog box opened Help Displays Help topics specific to the active tab Default Returns all settings to the default selection November 2014 PLT 01277 Version 1 2 4 1 Configuration Tab The Configuration tab has two sections Event Monitoring and Set Language Calibrate Ribbon Clean Printer Advanced Settings r Event Monitoring From the list select events to be monitored The driver will notify or prompt the user when the selected events occur Low Ribbon Clean Printer Error Status Password Prompt m Set Language Group or Field Description Event Monitoring This section selects events that result in notification or displays prompt for the user The default setting is to monitor four conditions Notifies the user that the amount of ribbon remaining for use in the cartridge is diminishing When error displays a Do not show this message again message allows the user to suppress the message during the current printing session Low Ribbon PLT 01277 Version 1 2 November 2014 Page 4 3 ToolBox Group or Field Description Notifies the user the printer requires cleaning and provides a Clean button to start the cleaning process Note The printe
28. dge 3 Close the cover and press the Power button once to restore power 4 Close the software program 5 Reboot the computer 1 Open the cover remove the ribbon cartridge and press the Power button two times to power down the printer 2 Check for any obstructions in the printhead are or mechanism Remove any obstructions 3 Reinstall the ribbon cartridge and close the cover Press the Power button to return power to the printer 5 The power off and back on procedure can reset the printhead or transfer headlift motor A The printer is compatible with selected types of ribbons An incompatible ribbon is installed OR The Ribbon Type on the Device Options tab is set incorrectly Invalid Ribbon Verify the Ribbon Type on the Device Options tab is set correctly If incorrect select the matching ribbon type Open the cover and remove the ribbon cartridge Install a compatible cartridge and close the cover PLT 01277 Version 1 2 November 2014 Page 5 3 Troubleshooting Error Message Description Troubleshooting No Ribbon Installed No ribbon is installed OR The ribbon is jammed in the cartridge OR The cartridge RFID tag is corrupt 1 Open the cover and check for a ribbon cartridge If no cartridge is present install a ribbon and close the cover 2 If a ribbon cartridge is present remove the cartridge and verify the ribbon can move freely and is not upside down in th
29. down button and select the installed ribbon type 1 Verify the Ribbon Type on the Device Options tab is set correctly If incorrect select the matching ribbon type 2 Open the cover and remove the ribbon cartridge 3 Install a compatible cartridge and close the cover 1 Ensure that cards are available and loaded correctly 2 Press the Pause Resume button To cancel the print click Cancel Print Unable to Read Settings from the Printer The printer driver does not detect the printer 1 Click OK 2 Verify that the printer is powered on 3 Check for communications errors See Section 5 1 Communications Errors PLT 01277 Version 1 2 November 2014 Chapter Cleaning Important Clean the printer on a regular basis to ensure that the printer consistently produces high quality output WARNING Disconnect the printer s power cord whenever performing any type of maintenance procedure unless otherwise directed AVERTISSEMENT D branchez le cordon d alimentation de l imprimante chaque fois d effectuer tout type de proc dure de maintenance sauf indication contraire The cleaning described in this section is additional to the information on the Clean Printer tab of the ToolBox For detailed information reference the Cleaning Kit instructions in the kit 6 1 Using the Required Supplies For the maintenance procedures outlined for the printer a Printer Cleaning Kit is required available from t
30. e a a aa a eara e e A 3 6 5 5 Image Color Tab ss ars Do i Moke a ed WISIS oe bind ek 3 7 3 4 Image Calibrate Tab 3 10 3 5 Magnetic Encoding Tab ix ax vad Re ame ra ra a EE d REGE EE 3 11 November 2014 PLT 01277 Version 1 2 36 Overlay 7 Print Area Tab sonora tin eae wea elas ed 3 12 3 6 1 Defining an Overlay or Print Area i 3 14 3 6 2 Defining additional areas i 3 15 3 6 3 Deleting a Defined Area wn wi ve ev ce eras 3 15 3 6 4 Visual Security Solutions eh ra 3 16 37 K PanelResim Tab ii odas de a rer hehe aa a derat 3 17 3 8 Printer Info Tab ee een ee nee en tte eens 3 19 Chapter 4 ToolBox voii oriris rt eee a Mele RUE cuted eee ee a ste 4 1 41 Configuration Tab i32 4443444 idad Poe eb ee ee a koe dieit is 4 2 42 Calibrate Ribbon Tab eses 243444 ben Ben Ban da neh an an neh bd 4 4 45 Clean Printer Tab sse mu a EE EE X RR mener RU ann do he a ate a Dr CAD 4 5 4 4 Advanced Settings Tab o o o o o ha hs 4 6 4 4 1 Settings and Troubleshooting 4 4 7 Chapter 5 Troubleshooting nun nn nn nn nn nn nn nn nn nn nn nn nun nn 5 1 5 1 Communications Errore 4 ae ae A ad a ies 5 1 5 1 1 Error and Status Messages 5 2 Chapter 6 Cleaning sii 6 1 6 1 Using the Required Supplies i 6 1 6 2 Cleaning the Printer 6 2 6 2 1 Cleaning Inside the Printer 0 i hrs 6 2 6 22 Cleaning Outside the Printer i 6 2 6 2 3 Clea
31. e cartridge 3 Verify the Ribbon Type on the Device Options tab is set correctly 4 Test with a new ribbon to verify the RFID tag Printer Needs Cleaning The number of cards set in the Cleaning Rate setting is reached The default value is 3000 Two options are available Clean Now or Remind Me To run the cleaning routine immediately click OK To delay the cleaning routine select the Remind Me option and select one of four options Never n 10 Prints n 50 Prints n 100 Prints Ribbon Break Jam Ribbon Miscue The ribbon is jammed or broken in the cartridge The ribbon is not able to find the next panel correctly 1 Open the cover and remove the cartridge 2 Verify the ribbon can move freely 3 If the ribbon is broken tape the ends of the ribbon together and wind any excess onto the take up spool 4 Reinstall the cartridge close the cover and press the Pause Resume button To cancel the print click the Cancel Print button 1 Open the cover and remove the ribbon cartridge 2 Verify the ribbon is not broken or upside down in the cartridge If the ribbon is not broken reinstall the cartridge close the cover and press the Pause Resume button If the ribbon is broken tape the ends of the ribbon together and wind any excess onto the take up spool Reinstall the cartridge close the cover and press the Pause Resume button To cancel the print click the Cancel Print button The
32. erage Some types of proximity cards have an uneven surface that inhibits consistent color transfer Some types of smart card chips are raised slightly above the card s surface which also results in poor color transfer Card Surface The UltraCard product line available exclusively as part of HID Global s Fargo brand secure card issuance solutions has a long standing reputation among dealers and end users for consistent quality in construction In addition to blank stock the UltraCard line is available in a variety of configurations for magnetic stripe and other anti counterfeiting features UltraCard PVC cards are medium durability cards for a glossy photo quality finish These cards are clean scratch free cards for high quality prints and extended printhead life UltraCard Brand Cards 18 Setup and Installation Procedures The setup and installation procedure follows 1 Unpack the printer and inspect the carton to ensure that no damage has occurred during transportation Make sure that all supplied accessories are included with the unit 2 Seethe Installation Guide for information on how to load the ribbon cartridge and card stock 3 See the Installation Guide for how to connect the power to the printer November 2014 PLT 01277 Version 1 2 Introduction and Specifications Page 1 12 This page intentionally left blank PLT 01277 Version 1 2 November 2014 Chapter Hardware User Interface The Card Printer
33. h the ribbon may jam or break Reserved Increase the value to increase tension To decrease tension decrease the value Note Small adjustments are recommended Too high or too low tension can cause the ribbon to break Ribbon Calibrate Green Resin Heat Adjust Reserved Adjusts the darkness of black resin text and bar codes if they appear faded or too light or dark Reserved Increase the value to darken the print Decrease the value to lighten the print Sleep Time OLED Contrast Adjusts the time until the printer stops energizing the transfer roller which conserves energy Reserved Increase the setting to delay the sleep mode Disable sleep mode with a O value The counter for this setting starts after standby time has elapsed Reserved Ribbon Calibrate Blue Reserved Reserved November 2014 PLT 01277 Version 1 2 ToolBox Page 4 8 Setting Description Troubleshooting Adjusts the number of cards The default value is 3000 To increase the frequency of Cleaning Rate printed before the printer cleaning lower the value 9 displays a message to Note The card count on the Printer Info tab does not indicate cleaning is needed reset when cleaning completes Ribbon Green LED Level Reserved Reserved Ribbon Blue LED Reserved Reserved Level Head Home R Offset Reserved eserved Head Print Offset Reserved Reserved Head Contact Offset Reserved Reserve
34. has two hardware user interface features buttons and beeps 2 1 Card Printer Buttons Card Printer Buttons The card printer has two buttons that perform multiple functions The light color of the buttons is blue except when there is an error condition which will be indicated in red Power Pause Resume 2 1 1 Using the Power Button The Power button initiates or interrupts electrical power to the printer e To start up the printer press the Power button once The buttons illuminate with a steady blue light e To deactivate the printer press the Power button twice The lighted buttons extinguish and become dark e The button also moves cards to the left along the card track toward the output hopper Press the Power button to clear jammed cards 2 1 2 Using the Pause Resume Button The Pause Resume button enables the user to temporarily stop and continue the print process e To suspend printing press the Pause Resume button once When printing stops the button changes from steady to blinking e To continue printing press the Pause Resume button once again The button returns to a steady glow November 2014 PLT 01277 Version 1 2 Hardware User Interface Page 2 2 2 1 3 Card Printer Beeps The card printer beeps to indicate the successful completion of a setting or activity e Asingle beep generally indicates a successful change e One or more beeps signals the restoration of default values for settings on the Advanced
35. he reseller This optional kit includes the following e Printhead cleaning swabs pre moistened with 99 99 isopropyl alcohol for cleaning the printer s printhead e Cleaning cards with an adhesive backing for cleaning the printer s rollers e Gauze pads pre moistened with 99 99 isopropyl alcohol for cleaning the printer s interior and exterior e Alcohol cards pre moistened with 99 99 isopropyl alcohol for cleaning the printer s platen rollers card feed rollers NOTE As with any electronic device internal components of the printer such as the printhead may be damaged if exposed to static electrical discharges To avoid potential damage always wear an appropriate personal grounding device such as a wrist strap with integral resistor connected to an ESD ground At a minimum make positive contact with the bare metal chassis of the printer with the hand prior to touching any internal electrical components November 2014 PLT 01277 Version 1 2 Cleaning Page 6 2 6 2 Cleaning the Printer 6 2 1 Cleaning Inside the Printer 1 Open the cover 2 Remove the ribbon cartridge from the printer 3 With compressed air blow out all visible areas of the printer interior to remove debris Note If there is not a can of compressed air use a cleaning pad from the printer cleaning kit to wipe out all visible areas inside the printer Remove any debris that may be inside WARNING Disconnect the Printer s power cord whenever performing
36. his slide controls the overall darkness and lightness of the dye sub printed image Move the slide to the left to use less heat in the printing process resulting in a lighter print Move the slide to the right to use more heat resulting in a darker print Note This slide only affects those images printed with dye sublimation ribbon panels YMC Adjusting this slide controls the amount of heat the printer uses when printing with the resin black panel Dye Sub Intensity YMC Move the slide to the left to use less heat in the printing process resulting in a lighter or less saturated print Resin Head Front gt j P Move the slide to the right to use more heat resulting in a darker or more saturated print Note This control can be helpful for fine tuning the sharpness of resin text and bar codes Move the slider to the left to use less heat on the overlay during the printing process Move the slider to the right to use more heat Overlay Heat O Advanced Setting button Clicking this opens the Advanced Image Color window PLT 01277 Version 1 2 November 2014 Printer Preferences Group or Field Description Adjust the sliders as needed to improve image quality Move the slide to the left for less sharpness contrast gamma color Move the slide to the right for more sharpness contrast gamma color Click OK to accept any variance from the default values and return to the
37. in green blue red white silver and gold 1000 prints Rewrite technology No ribbon is required Indicates the Ribbon type and the number of Ribbon panels printed where Yz Yellow M Magenta C Cyan K Resin Black O Overlay F Fluorescing Resin Print Ribbon Options 7 seconds per card K 24 seconds per card YMCKO Print speed indicates an approximate batch print speed and is measured from the time a card feeds into the printer to the time it ejects from the printer Print Speed Print soeeds do not include encoding time or the time needed for the PC to process the image Process time is dependent on the size of the file the CPU amount of RAM and the amount of available resources at the time of the print Indicates the ribbon type and the number of ribbon panels printed where Y Yellow M Magenta C Cyan K Resin Black O Overlay F Fluorescing Resin Card Size and Types CR 80 3 375 in L x 2 125 in W 85 6mm L x 54mm W Supported CR 79 3 313 in L x 2 063 in W 84 1mm L x 52 4mm W Accepted Standard Card e CR 80 edge to edge 3 36 in L x 2 11 in W 85 3mm L x 53 7mm W Sizes e CR 79 3 3 in L x 2 04 in W 8 3 8mm L x 51 8mm W 10 mil a 20 mil Accepted Card Thickness ZO mil 40 mil PVC or polyester cards with polished PVC finish Monochrome resin required for 100 polyester cards Optical memory cards with PVC finish Rewrite Accepted Card Types
38. inter Preferences Group or Field Description Select the ribbon type that is loaded in the printer YMCKO Yellow Magenta Cyan Resin Black Overlay E YMCKOK Yellow Magenta Cyan Resin Black 2 Panels Overlay Ribbon Type yp K Black Standard Resin K Black Premium Resin Colored Resin Resin Yellow Resin Magenta Resin Cyan Dual Sided Not available in the C50 Card Printer Options Rotate Front 180 Degrees Select this option to rotate the image on the front of the card by 180 degrees when printed Disable Printing Select this option to prohibit the printer from printing P This option is only available when the selected Ribbon Type is NONE Write Only See Section 3 2 1 Write Only November 2014 PLT 01277 Version 1 2 HID Printer Preferences Page 3 6 3 2 1 Write Only Select this option to use rewritable cards The default setup is for the printer to first erase the entire card then write new information on the card There is no option to select specific areas to erase To print or erase a section use the Overlay Print Area tab Select the specific area in the same manner as a print job with a color ribbon To erase many cards use the FARGO Workbench Re Writable Card Eraser option It does not print It only erases Note No ribbon is used with rewritable cards Do not load a ribbon into the printer when using this process Printing on a rewritable card with a ribbon will ruin the
39. ning the Printhead i 6 2 Chapter 7 Firmware Updates oo nn nn nen 7 1 7 1 Upgrade Infotmoation xd ene be a o la odd ea ewe doe Shae eee eed 7 1 PLT 01277 Version 1 2 November 2014 Chapter Introduction and Specifications FARGO C50 Card Printer User Guide At a Glance This User Guide covers the information required to setup install and configure the printer driver options The following topics are covered in this User Guide Chapter 1 Introduction and Specifications Chapter 2 Hardware User Interface Chapter 3 Printer Preferences Chapter 4 ToolBox Chapter 5 Troubleshooting Chapter 6 Cleaning Chapter 7 Firmware Updates 1 1 Using this Document Links are displayed in italic text If the user clicks on a link they will jump to that section in the document Hyperlinks to link to outside information are in underlined blue Clicking one of these will open a webpage or another document the link points to November 2014 PLT 01277 Version 1 2 Introduction and Specifications Page 1 2 12 Specifications This section provides specific information on the Regulatory Compliances Agency Listings Technical Specifications and Functional Specifications for the C50 Card Printer 1 2 1 Regulatory Compliance The Card Printer is listed under UL 60950 1 2 edition Information Technology Equipment UL File Number E145118 Note This product is intended to be supplied by a Listed Power Unit marke
40. on 1 2 November 2014 Page 3 3 Printer Preferences Group or Field Description Select the Card Size option CR 80 This is the default card size selection for the Card Printer with a print area 53 6mm x 85 5mm x 30mil 3 375 in x 2 125 in x 30 mil CR 79 Use this selection to print to cards with a print area 53 6mm X 85 5mm X 30 mil 2 110 in x 3 366in x 30 mil Card Size Note These print area dimensions are Imm 04 in larger than the actual card size This extension enables the Printer to overprint images so they appear edge to edge when transferred to the card When designing a card format set the card or page size within the card design program to the exact Print Length and Print Width dimensions listed in the Card Size panel Print Width These two items display the actual card size Print Length Select the Card Thickness mil value from the drop down list Options are Card 10 mil Thickness 20 mil 30 mil 40 mil Select either the Portrait or Landscape option Orientation Portrait The card will print in a vertical orientation Landscape The card will print in a horizontal orientation Copies Set the number of copies to be printed Range is 1 to 10000 Informational Buttons Diagnostics Click Diagnostics to launch the Workbench Printer Utility ToolBox Click ToolBox to access the ToolBox window and options After installation of a compatible ribbon cartridge in the printer
41. ose the cover 3 Remove the paper backing from both sides of the Cleaning Card Note DO NOT remove small liner strip if a magnetic encoding module is installed in your printer 4 nsert the Cleaning Card into the Card Hopper s infeed rollers See the diagram below 5 Click on the Clean button below 6 Guide the Cleaning Card into the printer if necessary 7 When the Cleaning routine is complete the Cleaning Card will exit the printer 8 Reinstall the Ribbon Cartridge Note The Cleaning routine will begin after all current print jobs have completed A standard CR80 size cleaning card must be used November 2014 PLT 01277 Version 1 2 ToolBox Page 4 6 4 4 Advanced Settings Tab The Advanced Settings tab contain the adjustments for the internal printer settings Adjustment is typically required in connection with troubleshooting Customize the settings for each printer and save the settings within the printer memory CAUTION In general do not adjust these settings However under rare circumstances adjustment is necessary Ensure there is advanced knowledge prior to making these adjustments Enable Swift ID over a USB Connection M Enable Mag Verify Group or Field Description Setting This column displays the type of setting Default This column displays the default setting value Current This column displays the current setting value PLT 01277 Version 1 2 November 2014 Page 4 7 ToolBox 4
42. queeze to saturate the tip from the printer cleaning kit to firmly wipe back and forth across the surface of the printhead 5 Reinstall the ribbon cartridge and close the cover when the printhead is completely dry November 2014 PLT 01277 Version 1 2 Cleaning Page 6 4 This page intentionally left blank PLT 01277 Version 1 2 November 2014 Chapter Firmware Updates New firmware releases provide enhancements such as improved reliability added features or better print quality Updates are available for download from the Internet at support hidglobal com Refer to the Workbench Printer Utility User Guide to download and install firmware updates 7 1 Upgrade Information To upgrade the printer s firmware perform the following steps 1 Run the FARGO Workbench Printer Utility 2 If running FARGO Workbench Version 3 or greater a Select the Update Manager Workbench Utility b Select the printer s to update C Click the Select Firmware file option to locate or enter this latest firmware file FRW 00373_DTC100_v2 3 3 20 frm d Search for the firmware file or enter the name and click Open e Click Begin Updating Firmware to send the file to the printer s 3 If running a FARGO Workbench release prior to Version 3 a Choose the Application Menu at the upper left and select Upgrade Firmware b Enter the firmware file name or click Browse to find and select this latest firmware file FRW 00373_DTC100_v2 3 3 2
43. r cleaning notification dialog displays when 3000 cards have been printed The number of cards can be changed on the Advanced Settings tab Clean Printer See Section 4 4 Advanced Settings Tab Error Status Notifies the user that an error status exists Requires the user to enter a security password before the printer driver Password Prompt accepts a print job This section enables the selection of the language used for printer driver Set Language messages The default printer language is English November 2014 PLT 01277 Version 1 2 ToolBox Page 4 4 4 2 Calibrate Ribbon Tab The Calibrate Ribbon tab enables the user to start the ribbon calibration Follow the directions on the screen to perform this procedure Configuration Calibrate Ribbon Clean Printer Advanced Settings Ribbon Sensor Calibration 1 Ensure that the ribbon cartridge is removed 2 Ensure the Printer s cover is closed 3 Click on the Calibrate button The Printer will beep twice if the procedure was successful once if the procedure failed Click on the OK button to complete the procedure PLT 01277 Version 1 2 November 2014 Page 4 5 ToolBox 4 3 Clean Printer Tab The Clean Printer tab has the instructions to clean the printer Additional cleaning can be done as needed See Chapter 6 Cleaning Configuration Calibrate Ribbon 1 Remove all cards from Card Hopper 2 Remove the Ribbon Cartridge and cl
44. ts remarkable direct to card print quality for dye sublimation and resin thermal transfer 1 6 Printer Components Print Ribbons Print ribbons are available in several versions to meet a variety of requirements Resin only Dye sublimation only Combination dye sublimation resin versions To make it easier to remember which print ribbons are which a letter code has been developed to indicate the type of ribbon panels found on each ribbon This letter code is as follows Dye Sublimation Yellow Panel Dye Sublimation Magenta Panel Dye Sublimation Cyan Panel K 7 Resin Black Panel Premium unless otherwise stated o0 Clear Protective Overlay Panel Fluorescing Panel 1 6 1 Ribbon Types and Print Counts The following table lists print capability of each ribbon type Ribbon Count 100 1000 1000 1000 YMCKO Full Color Resin Black Overlay K Standard Resin K Premium Resin Colored Resin PLT 01277 Version 1 2 November 2014 Page 1 11 Introduction and Specifications 17 Printer Components Blank Cards Type Description CR 80 edge to edge 3 36 in L x 2 11 in W 85 3mm L x 53 7mm W eee CR 79 3 3 in L x 2 04 in W 83 8mm L x 51 8mm W Suitable cards must have a polished PVC surface free of fingerprints dust or any other types of embedded contaminants In addition cards must have a completely smooth level surface for the printer to achieve consistent color cov
45. y The defined are applies only to the print process Overlay is disabled Security Options Use this field to enable and select a visual security option The default value for all cards is No Visual Security Visual Security When one of the options is selected the overlay print area feature is disabled Solutions and the security options become selectable See Section 3 6 4 Visual Security Solutions Verimark This option is reserved for future use HoloMark Use this option for hologram security November 2014 PLT 01277 Version 1 2 Printer Preferences Page 3 14 3 6 1 Defining an Overlay or Print Area To define an overlay or print area 1 Click the drop down list in the Overlay Print Area field and select the option 2 When an option is selected a default black area displays on the card design area grid 3 Click and drag to enlarge the area and move it to the preferred location on the card The size and coordinates of the area update in the number fields using the units specified inches or mm Ced Device Options Image Color Image Calibrate Cad Device Options image Color Image Calibrate CR 80 Card Size Front Back CR 80 Card Sze Front C Back Direction Card Travels through Printer Overlay Print Area Deines Areals For Print and Overlay Il Defned Area s C For Overlay Only a C For Print Only No Overlay Oma Smart Chip Area
Download Pdf Manuals
Related Search