Features, Specifications, Set-up & Troubleshooting
Contents
1. the frame screws for the lenses Troubleshooting IIlumination cuts off See section on Indication That Battery Pack must be charged Battery Pack will not charge See section on Battery Pack and Charger SpecFrame damage Most problems can be dealt with by an optometrist e g missing screws new nose pads and bent frames For SpecFrame replacement contact VOROTEK For all other problems contact VOROTEK Warranty Scopes 3 year for any component defect or manufacturing failure Battery Pack 18 months for any component defect or manufacturing failure Warranty does not cover abuse misuse or transit damage Please contact VOROTEK to discuss problems or faults before sending for repairs VL_M0512 V12. LED Headlight VSI E office vorotek com au PORTABLE SURGICAL QUALITY LED ILLUMINATION www vorotek com au Features Specifications Set up amp Troubleshooting LED Illumination Light emitting diodes LED are a solid state device with an average life of gt 35 000 hours They rarely need replacing but if this is necessary it must be done by VOROTEK The illumination colour is daylight and does not vary with the age of the LED or the level of charge of the battery pack Illumination uniformity and quality is much better than with filament lamps Brightness now compares with operating room headlights Dimmable Illumination Optional The dimmer function provides 7 evenly spaced levels of illumination The dimmer switch is located on the leash Click once on click once off Press and hold for dimming to select level of illumination Once preferred level of illumination is selected a click will turn the illumination on off without changing set level Battery Pack and Charger Direct Mains Power Supply Specifications and features Batteries are Lithium lon 11 1 Volts 2 900mAh This provides 10 hours of on time at maximum level of illumination Memory effect for these batteries is negligible The Battery Pack features short circuit protection and charging control circuitry Use only the supplied Charger otherwise warranty will be void For operations lasting several hours the Direct Mains Power S
3. TE Battery Pack cannot be connected To scope Adaptor plug Plug into mains power SpecFrame Model Height adjustment The height of the illumination system is adjusted by moving the system up or down on the SpecFrame bracket Loosen the screw that connects the illumination system to the SpecFrame 1 turn and adjust Do not leave screw loose always re tighten Toggle on wiring leash This is often worth using To prevent sliding down the nose For all lengthy procedures e g operating To take pressure off the nose When head is tilted down HeadBand Model The HeadBand version requires more care to keep the Illumination in optimal position The big advantage of the HeadBand version is that it is suited to shared use It can be worn over the top of the user s spectacles The HeadBand will fit almost any head anatomy HeadBand adjustment The HeadBand mounting bracket has 3 adjustable links The 3 link system allows separate adjustment of viewing the angle and forward position of the illumination system The height of the illumination system can be adjusted by moving the HeadBand up or down on the forehead Working with Corrective Lenses Can be fitted to the SpecFrame of the LED HeadLight by an Optometrist The HeadBand model can also be used over the individuals own corrective spectacles Lens fitment There is no need to unscrew the illumination system or dismantle the scope in any way other than
4. upply is often a better option see Direct Mains Power Supply For numerous short procedures the Battery Pack is very convenient It is designed for use on left side of belt or in shirt pocket of scrubs If it is worn in the breast pocket the switch can be used by the operator through the operating gown An alternative is to clip the Battery Pack to the back of the gown Switch on Battery Pack Switch on Battery Pack has three positions which are labelled ON OFF and CHARGE Indication that Battery Pack must be charged LED illumination cuts out and resets repeatedly NOTE LED illumination does not fade but the protective circuit breaker keeps switching off and resetting NOTE Charging is best done overnight frequently and before the Battery Pack runs flat Battery Pack charging Battery Pack indicator Set switch on the Battery Pack to charge position RED CONSTANT Charging takes up to 8 hours GREEN 90 plus charged but still trickle charging When charging reaches 100 trickling stops and indicator reverts to red flashing RED FLASHING Fully charged It will also flash red if incorrectly connected i e Battery Pack switch not in the charge position or charger not connected to mains Direct Mains Power Supply To connect the L Scope to the Direct Mains Power Supply the adaptor plug must be used The adaptor plug is fixed to the Charger Direct Mains Power Supply lead see diagram below NO
Download Pdf Manuals
Related Search