Dolphin Hybrid Robotic Suction Cleaner Manual
Contents
1. Hybrid Robotic Suction Pool Cleaner Operating Instructions 8151170 maytraynics ead tiona Pool erience Warnings Sen Specifications 000000 IILAN Water conditions ccoocccnccnccnnnnccccnnnoccnnnnaninonanos Removal from the Pool and Storage Troubleshooiingssssss uns Hybrid Robotic Suction Pool Cleaner Operating Instructions The Hybrid Suction Cleaner The Hybrid Cleaner is powered by the pool pump For successful cleaning results make sure that you connect the cleaner properly to the pool system Follow the instructions in this booklet for easy efficient and safe operation Parts The Hybrid Cleaner kit includes Hybrid Cleaner Hose Sections 1 17m 3 83ft x 10 Flow Indicator 90 Adapter Float Skimmer Adapter Optional Automatic Safety Valve OVNIS Leaf Canister optional For proper operation the hose must be long enough to reach from its pool connection to the most distant edge of the pool plus two extra sections Drawing A If needed you can purchase additional hose sections from your supplier Replacement parts are also available Two extra hose sections 2 Hybrid Robotic Suction Pool Cleaner Operating Instructions Warnings A e Do not enter the pool while the cleaner is working e The manufacturer is not responsible for any damage to the external p2. e the hose in the water and remove any trapped air Connect the Flow Indicator to the free end of the hose under water level Switch the pool pump ON Check the Flow Indicator Drawing D Make sure that the indicator is between MIN and MAX If the indicator is not in the satisfactory range there may be air trapped in the hose Wait approximately two minutes while the pump continues to operate to remove any trapped air o O Ifthe indicator remains outside the satisfactory range correct unsatisfactory flow according to the instructions in the following table After each action check flow with the Flow Indicator If flow is still unsatisfactory proceed to the next action Hybrid Robotic Suction Pool Cleaner Operating Instructions Operating above the MAX may damage the Hybrid Cleaner CAUTION Table 1 Flow Indicator Flow Indication Action In satisfactory range Connect the Hybrid Cleaner and begin the cleaning process To correct the flow do one or more of the following e Make sure that the water level of the pool reaches the skimmer e Check that the hose is not twisted or bent near the pool connection If it is use the 90 Adapter Below MIN e Close unused skimmers or main drain Make sure that the skimmer used for the Hybrid Cleaner is fully opened e Remove trapped air from the hose and Hybrid Cleaner e Tighten connections between Hose Sections e Backwash the main filter and clean the ski
3. g L and clean out any trapped debris Drawing M e fa track slipped off the wheels return it If this occurs frequently purchase replacement tracks from your supplier e Contact your supplier for repair e Connect additional Hose Sections e Correct excessive flow Refer to Table 1 e Make sure that the Float is in the correct position Refer to Connect the Cleaner on page 5 e Remove the Float from the last Hose Section e Make sure to stop operation of the pool drain while the Cleaner is working 1 Turn the pump OFF 2 Remove the Cleaner from the pool 3 Open the swivel and clean it Drawing N 4 Close the swivel properly and make sure the swivel moves freely e The suction is below MIN Refer to Table 1 If does not help contact your supplier 1 Ensure that the hoses are firmly fastened 2 Ensure that the Leaf Canister lid is firmly closed Hybrid Robotic Suction Pool Cleaner Operating Instructions Hybrid Robotic Suction Pool Cleaner maytroynics www maytronics com ar tiona Pool erience
4. handle and remove the Hybrid Cleaner from the pool Drawing J Remove the Hybrid Cleaner from the pool only by its handle O Store the Hybrid Cleaner and Hose Sections out of direct sunlight Do not store the Hybrid Cleaner where it will be exposed to excessive heat or frost Make sure that Hose Sections are in a straight position Drawing K For longer life of the equipment it is recommended to rinse the Hybrid Cleaner and parts with tap water Reopen all skimmers Troubleshooting The Hybrid Cleaner is designed to operate with a minimum of user maintenance If a problem does occur try to determine the cause Often the solution is already part of the standard operating instructions in this booklet If you cannot solve the problem easily contact your supplier Hybrid Robotic Suction Pool Cleaner Operating Instructions 7 The following are typical problems that might occur and possible solutions Table 3 Troubleshooting Symptom The Cleaner does not move or moves slowly without indicator light The Cleaner moves on the back wheels only The Cleaner moves on the front wheels only The Cleaner gets stuck on the pool drain The hose is twisted The Cleaner is turning in circles Air bubbles at the exit of the water from the jets or a noise of air suction Possible Solutions e Correct insufficient flow Refer to Table 1 e Remove the service opening cover on the Cleaner bottom Drawin
5. in case the Cleaner is blocked by a forgien object Hybrid Robotic Suction Pool Cleaner Operating Instructions 3 If connecting toa skimmer choose the skimmer located INN Kon closest to the center of the longest pool 90 Adapter wa Safety Valve Safety Valve Remove the skimmer en E Be basket and push the et Chamber male end of a Hose Section into the Safety Valve using a twisting motion Deep Skimmer Shalow Skimmer If using a shallow skimmer connect the 90 Adapter to the automatic Safety Valve before connecting the Hose Section to ensure proper suction flow Drawing C connection to the most distant edge of the pool plus two extra sections Make sure to add the Float 40 cm 1 30 Ft above the Hybrid Cleaner on the last Hose Section Continue connecting additional sections until the hose is long enough to reach from its pool Drawing F Install the optional Leaf Canister between the first and second Hose Sections under water as well Air trapped in the hose can damage your pump Check Flow The Hybrid Cleaner operates on the suction power of the pool system Satisfactory flow is important to ensure proper cleaning and to prevent damage to the Hybrid Cleaner Make sure to stop operation of the pool drain while the Hybrid Cleaner is working To make sure that flow is satisfactory Completely immers
6. le below Table 2 Indicator Lights Light Indication Red 2 sec Start of operation Blue slow blinking Proper functioning The Hybrid Cleaner is moving forward Blue fast blinking Proper functioning The Hybrid Cleaner is making a turn Blue and red 2 sec Proper functioning The Hybrid Cleaner identifies a wall e Insufficient flow To correct unsatisfactory flow refer to Table 1 Red blinking e Use the Troubleshooting Guide Table 3 Clean the Leaf Canister Make sure the pump is OFF Disconnect the Leaf Canister and hold the adjacent Hose Section Open the lid by turning it anticlockwise Remove the filter Clean out leaf and other debris Drawing H Rinse the filter Return the filter and lid Connect the Leaf Canister and hose sections under the water Make sure to remove trapped air from the Leaf Canister Turn the pump ON O00000 OS Canister Leaf amp debris Filter Hybrid Robotic Suction Pool Cleaner Operating Instructions Removal from the Pool and Storage When you choose to remove the Hybrid Cleaner from the pool O Ensure to switch the pool pump OFF Disconnect the Skimmer Adapter from the suction line opening Disconnect the Safety Valve Disconnect the Hose Sections pulling them slowly one by one out of the pool When you reach the section connected to the Hybrid Cleaner grasp the Hybrid Cleaner
7. mmer and pump basket e Open unused skimmers partially if closed e If the Hybrid Cleaner is connected to a dedicated suction line adjust its Above MAX control valve on the pool pump e If the Hybrid Cleaner is connected to a skimmer reduce the suction on the pool pump I ul Im i ll mi 8 AN A O ut Connect the Hybrid Cleaner Make sure that the pool pump is switched OFF Disconnect the Flow Indicator Drawing E Make sure the Float is connected on the hose 40 cm 1 30 ft above the Hybrid Cleaner Make sure that the hose is entirely under the water level and is filled with water O Hold the Hybrid Cleaner by the handle and put it in the water Turn the Hybrid Cleaner upside down to remove any trapped air Connect the hose end to the Hybrid Cleaner Drawing F Make sure that the hose is firmly connected Ensure that there is a small space between the locknut and the pipe Realese the Hybrid Cleaner in the pool Restart the pump Hybrid Robotic Suction Pool Cleaner Operating Instructions 5 Cleaning Process The Hybrid Cleaner continues to clean your pool as long as the pool pump is operating The time required to cover all pool surfaces depends on the pool size In general 1 2 hours are sufficient During operation refer to the indicator lights Drawing G on the cleaner to make sure that the Hybrid Cleaner is functioning properly see tab
8. ump Specifications e Wight 4 5 kg 9 9lb e Hose length 10 Hoses of 1 17m 3 83 e Required water flow 5 8m Water conditions e Chlorine Max 4ppm e pH 7 0 7 8 e NaCl Max 5000ppm e Temperature 6 34 C 43 93 F An optional Leaf Canister is also available for purchase from your supplier EA The Leaf Canister traps leaves and other large debris preventing blockage of the pool filter system For maximum energy backwash savings and environmentally friendly operation we recommend using the Leaf Canister Pool Preparation To prepare the pool for cleaning O Remove any large objects that might E interfere with the First Hose y H cleaner s operation Section Section Make sure that the eee water level reaches ae 5 the skimmers Skimmer Skimmer Adapter Adapter Backwash the pool filter and make sure that suction pressure Connecting to Skimmer Connecting to Suction Line is sufficient as recommended by the pump manufacturer Suction Line Setup Connect the Hose The Hybrid Cleaner connects to the pump of your pool either by a built in dedicated suction line or through one of the pool skimmers Connect the Hose Sections in the pool under water Switch the pool pump OFF Insert the flexible Skimmer Adapter only if needed into the suction line opening and make sure to connect the Automatic Safety Valve Allows water flow into the pump
Download Pdf Manuals
Related Search