Operating Instructions
Contents
1. Finishing Automatic Stapling When the optional finisher is installed you can perform automatic stapling in multiple positions To apply finishing to your documents Place the originals in the Automatic Document Feeder 2 Press the key on the Basic screen as shown on the right shaded button Press the button that ar 3 corresponds with the finishing position you desire Select other copy modes as required 4 Press the Start key 1 Sided and 2 Sided Copying It is possible to make single or 2 sided copies duplex from single or 2 sided originals To apply duplex settings to documents Place the originals in the Automatic Document Feeder Press the key on the Basic screen as shown on the right shaded button Press the button on the Duplex menu that corresponds with the setting you desire Select other copy modes as required Press the Start key stun1I0 556 656 756 856 Operating Instructions Replacing the Toner Without Interupting Jobs On the new e STUDIO556 656 756 856 changing the toner cartridge is fast and simple It can even be changed while the system is copying When the toner is LOW the LCD panel will display the following symbol The system stores enough toner to produce approximately 2 000 copies At this point the cartridge can be changed When the toner is EMPTY the LCD panel will display the following symbol At this point the cartridge MUS2. T be changed To change the cartridge when the toner is LOW or EMPTY perform the following steps Insert your fingers ya into the handle on the front of the system and open the toner cover DOme y DA Pull the toner cartridge holder toward you Take out the empty toner cartridge Shake the new toner cartridge well to loosen the toner inside TOSHIBA Leading Innovation gt gt gt Holding the new toner cartridge horizontally pull out the seal in the direction of the arrow Install the toner cartridge in the toner cartridge holder e Match the label orange on the equipment with the shutter orange on the toner cartridge then insert the toner cartridge to the end e f you cannot insert the toner cartridge completely rotate it slightly to check the position and insert it again e Wipe up any excess toner e Wait adding toner appears Return the toner cartridge holder to its original position Close the toner cover e Wait adding toner appears and supplying toner starts automatically For Toshiba Service and Supplies call 0800 887 601
Download Pdf Manuals
Related Search