product manuals
Contents
1. LENODX Bluetooth Block Rocker Speaker MODEL NO BT9388 Operating Instructions PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THE PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care quick stops excessive force and uneven surfaces may cause the product and cart2. combination to overturn 9 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that product heat 10 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 11 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 12 Only use attachments accessories specified by the manufacturer 13 Unplug this apparatus during lightening storms or when unused for a long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus 16 Do not overload wall outlet Use only power source as indicated DONAN 17 Use replacement
3. distortion Open power switch Use power adaptor to charge the battery Change signal source Reconnect signal line Properly adjust the volume knob Inspect USB or audio switch Change signal source Readjust or change signal line Correctly insert the microphone to the jack Open the switch of wireless microphone Properly adjust the volume knob of microphone Turn the switch of wireless microphone to on Add batteries to the wireless microphone Change the batteries in the wireless microphone LENODX Lenoxx Electronics Aust Pty Ltd Importers and Wholesalers of Electronics and toys 6 Oban court Laverton North Victoria 3026 ABN 97 844 321 851 PH 03 9267 2100 FAX 03 9267 2199 For service call 1300 666 848 Email lenoxx lenoxx com au www lenoxx com au
4. parts as specified by the manufacturer 18 Upon completion of any service or repairs to this product ask the service technician to perform safety checks 20 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instruction 21 Object and Liquid Entry Never push objects of any kind into this product through Openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 22 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c Ifthe product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e Ifthe product has been dropped or damaged in any way a
5. ally When copying MP3 file you shall copy to the catalogue of USB stick It is suggested to delete all the unnecessary files and file catalogues in order to reduce the occurrence of reading error when the encoding is played Panel rear plate MP3 function and operation Volume it is used to adjust the sound of volume TREBLE treble it is used to adjust the gain of music treble Bass it is used to adjust the gain of music bass EQ equilibrium it is used to adjust music frequency curve and gain and attenuation within certain frequency MIC VOL microphone volume it is used to adjust the volume of microphone MIC TREBLE microphone treble it is used to adjust the gain of microphone treble MIC BASS microphone bass it is used to adjust the gain of microphone bass ECHO microphone echo it is used to adjust the echo depth of microphone DELAY microphone delay it is used to adjust the effect of microphone echo delay MIC1 MIC2 microphone 1 and microphone 2 they are used to connect the plug interface of the wire microphone GT 1 GT2 guitar 1 and guitar 2 they are used to connect the interface of guitar audio wire GUITAR VOLUME it is used to adjust the volume after the guitar input function is amplified DC FUSE it is used for the power to supply the fuse of the whole machine with the protective tube of F10A 250V POWER Power is applicable to the power control of sound amplifier of the whole machine instead of that
6. laying status Also press when you want to stop playing from USB stick memory card and when you need to change USB stick or memory card MP3 LINE MODE audio input switch it is used to switch to use the external audio or built in MP3 encoding sound as the signal source of audio amplifier i VOL key select the previous song for playing the volume will be reduced by pressing the key for longer than 3seconds PPIVOL key select the next song for playing the volume will be increased by pressing the key for longer than 3 seconds REPEAT repetitive playing press the key for repeating of single song or total songs Operation of FM receiving function SCAN key pressing press the key and the radio will scan the local radio station and save it automatically CH key pressing press the key and the radio will read the saved radio station and select the next one in ascending order CH key pressing press the key and the radio will read the saved radio station and select the previous one in descending order Note MODE key is used to switch radio status in order to use radio key pressing function if the receiving frequency needs inputting manually press the numbers on remote control directly to input the frequency of radio station Basic operation and attention of wireless microphone e Open the battery cover correctly and install the battery Attention shall be paid to the cathode and anode of the battery e Turn the power switch on microph
7. nce noise e If you have purchased more than two sets of active audio amplifiers matched with wireless microphone from the company and intend to use them together please select the varieties in different standard frequencies If the frequency is identical two sets machines can not be used until they are separated from each other for 100m so as to avoid mutual interference and other unnecessary troubles Never use the machine with a VCD CD DVD player and other equipments with strong interference frequency when they are used so as to avoid mutual interference between the same frequency and directly affecting the normal work of wireless receiving of microphone Common simple faults and guidance for operation Simple fault analysis Troubleshooting Failing to electrify No sound External microphone has no sound Problems with wireless microphone The power switch is not opened The electricity quantity of built in battery is totally consumed Failing to input sound source Failing to establish signal line Main volume is switched to minimum USB playing has no sound Faults with external signal source Poor contact or damage of external signal line External microphone is not fully inserted in the jack The external microphone switch is not opened The volume knob of microphone is off The switch of wireless microphone is not on No batteries are inserted into the wireless microphone The sound of wireless microphone is in
8. nd f When the product exhibits a distinct change in performance this indicates a need for service Attention The product has been installed with a rechargeable battery making it applicable for outdoor use Please charge the battery before using it outdoors so as to guarantee that the machine can be used for a longer time outdoors The machine has been set with power switch circuit When you connect the adaptor to the power and insert the plug to the charging interface the machine will switch to the power supplied by the adaptor automatically and charge the built in battery When the adaptor interrupts the power the machine will intelligently switch to the built in battery for work continuously When adaptor is used to charge the battery the integrated intelligent charging circuit within the machine will give hints about charging and the charging indicator lamp will light After charging is finished the intelligent charging circuit will give hint to that that the charge has been fully charged and light the charging indicator lamp At this moment you can close the AC power of the adaptor If you still use adaptor in the machine to work the charging circuit will automatically cut off the charging circuit and it is unnecessary for you to worry about the charging breaking You shall notice that the battery has certain service life and it is beyond the warranty scope of the company Under general circumstances the built in battery needs charging fo
9. of charging power When the adapter is connected the battery charging is not controlled by the switch DC15V IN 15V DC power input the interface of external power adaptor please use the original adapter CHARGING indicator lamp of battery power after the power adaptor is connected the indicator lamp will be on and battery starts to be charged FULL indicator lamp of full charge when adapter is used to charge the battery it means full charge when the indicator lamp is on WIRELESS MIC ANT built in microphone antenna when you use wireless microphone please make the antenna is vertically upward so as to reach a better receiving effect 12V BATTERY IN external 12V battery interface please carefully check the anode and cathode when connecting and the applied connection line can not be smaller than 0 75 square meters Attention shall also be paid to the firmness when connecting it LINE IN external audio interface it is used to connect the compatible audio equipment such as DVC and computer Display screen of MP3 encoding player it is used to display the playing track playing time or the receiving rate under receiving status USB interface when MP3 function of USB is needed insert the USB with MP3 music files to the interface SD MMC CARD insert SD card or MCC card with copied MP3 music files to the interface I PLAY PAUSE press to switch to pause status when playing or vice versa E STOP press to stop playing under p
10. one to ON If the power indicator lamp does not flash or always lights inspect whether the battery voltage is insufficient or the polarity of battery is installed oppositely e Before using wireless the microphone please extend the rod antenna and make it vertically upward so as to reach a better receiving effect e Adjust the microphone volume knob on the audio amplifier and adjust its position according to the sound volume when singing so as to reach the ideal effect e Do not allow the receiving antenna to touch a metal surface wall or other obstacle if it is too close the performance will be reduced dramatically influencing the receiving effect e The effective using distance of wireless microphone is within 30m please never use it beyond the effective range in order not to affect the singing effect when the electricity quantity of battery is reduced or the wireless interference signal of the using environment is too strong the using distance shall be shortened accordingly e To reach the best singing effect the distance between mouth and microphone shall be 5 15CM and the best angle is 45degrees e After the microphone is used for a very long time and lacks of electricity the indicator lamp for electricity insufficiency will light Please change the battery in order not to affect the singing effect e Never use the microphone in the same frequency point for singing within short distance since it may cause silence or interfere
11. r 8 10 hours With more charging times the battery volume will change and full charging time will reduce accordingly When the battery is out of charge after being used for a short time please change the built in battery The user shall also notice that if the electricity quantity of the battery is reduced when using the machine outdoors please close the power switch on the rear plate and charge the built in battery within 24hours If the electricity quantity of battery is totally consumed the situation that the battery can not be charged and the service life is expired will happen When you don t use the machine for a long time and leave it alone please charge the battery every six months so as to avoid the invalidity of battery Instruction of USB with MP3 encoding playing When you need to use the built in MP3 encoding function please format your USD stick as FA T32 format in computer first and endure the files are in MP3 format When reading USB stick the encoding system will engage in encoding playing according to the generation sequence of MP3 songs file Therefore the song which is copied to USB stick first will be played in priority When the user needs to play according to the specific sequence they can arrange the copying sequence If the files copied to USB stick can not be played please inspect whether the file format is in MP3 format If not please switch to MP3 format in computer and then copy to USB stick in order to play norm
Download Pdf Manuals
Related Search